1 # Copyright (C) 2019-2021 CEA/DEN, EDF R&D
3 # This library is free software; you can redistribute it and/or
4 # modify it under the terms of the GNU Lesser General Public
5 # License as published by the Free Software Foundation; either
6 # version 2.1 of the License, or (at your option) any later version.
8 # This library is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 # Lesser General Public License for more details.
13 # You should have received a copy of the GNU Lesser General Public
14 # License along with this library; if not, write to the Free Software
15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 from SketchAPI import *
22 from salome.shaper import model
25 partSet = model.moduleDocument()
26 Part_1 = model.addPart(partSet)
27 Part_1_doc = Part_1.document()
28 model.addParameter(Part_1_doc, "ep", "0.5875")
29 model.addParameter(Part_1_doc, "ep2", "0.35")
30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
31 SketchLine_1 = Sketch_1.addLine(-4.81482486096809e-34, 0.6, -0.08939999999999999, 0.6)
32 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
33 SketchLine_2 = SketchProjection_1.createdFeature()
34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
35 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
36 SketchLine_3 = Sketch_1.addLine(-0.08939999999999999, 0.6, -0.08939999999999999, 0.46)
37 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
38 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
39 SketchLine_4 = Sketch_1.addLine(-0.08939999999999999, 0.46, -0.2894, 0.46)
40 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
41 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
42 SketchLine_5 = Sketch_1.addLine(-0.2894, 0.46, -0.2894, 0.36)
43 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
44 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
45 SketchLine_6 = Sketch_1.addLine(-0.2894, 0.36, -0.08940000000000001, 0.36)
46 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
47 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
48 SketchLine_7 = Sketch_1.addLine(-0.08940000000000001, 0.36, -0.08940000000000001, -0.5600000000000001)
49 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
50 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
51 SketchLine_8 = Sketch_1.addLine(-0.08852125812784814, -0.571165474137811, -0.07285119438446976, -0.5729508523825384)
52 SketchLine_9 = Sketch_1.addLine(-0.07285119438446976, -0.5729508523825384, -0.0654, -0.6028359607518391)
53 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
54 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
55 SketchLine_10 = Sketch_1.addLine(-0.0654, -0.6028359607518391, -0.0654, -1.285035960751839)
56 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
57 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
58 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_10.result())
59 SketchLine_11 = Sketch_1.addLine(-0.0654, -1.285035960751839, 0.3076, -1.285035960751839)
60 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
61 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
62 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_11.result())
63 SketchLine_12 = Sketch_1.addLine(0.3076, -1.285035960751839, 0.3076, -1.045635960751839)
64 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
65 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
66 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_12.result())
67 SketchLine_13 = Sketch_1.addLine(0.3076, -1.045635960751839, 0.007599999999999971, -1.045635960751839)
68 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
69 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
70 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_13.result())
71 SketchLine_14 = Sketch_1.addLine(0.007599999999999971, -1.045635960751839, 0.007599999999999971, -0.3926359607518392)
72 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
73 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
74 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_14.result())
75 SketchLine_15 = Sketch_1.addLine(0.007599999999999971, -0.3926359607518392, 0, -0.3307389278992326)
76 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
77 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_14")
78 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_2.result())
79 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_21")
80 SketchLine_16 = Sketch_1.addLine(-4.235164485203422e-23, 0.6, 0, -0.3307389278992326)
81 SketchLine_16.setName("SketchLine_20")
82 SketchLine_16.result().setName("SketchLine_20")
83 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.endPoint())
84 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_23")
85 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 0.08939999999999999)
86 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_3.result(), 0.14)
87 SketchConstraintLength_2.setName("SketchConstraintLength_5")
88 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_4.result(), 0.2)
89 SketchConstraintLength_3.setName("SketchConstraintLength_6")
90 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_5.result(), 0.1)
91 SketchConstraintLength_4.setName("SketchConstraintLength_7")
92 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchLine_3.result())
93 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_24")
94 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_7.result(), 0.92)
95 SketchConstraintLength_5.setName("SketchConstraintLength_8")
96 SketchConstraintLength_6 = Sketch_1.setLength(SketchLine_10.result(), 0.6822)
97 SketchConstraintLength_6.setName("SketchConstraintLength_9")
98 SketchConstraintLength_7 = Sketch_1.setLength(SketchLine_11.result(), 0.373)
99 SketchConstraintLength_7.setName("SketchConstraintLength_10")
100 SketchConstraintLength_8 = Sketch_1.setLength(SketchLine_12.result(), 0.2394)
101 SketchConstraintLength_8.setName("SketchConstraintLength_11")
102 SketchConstraintLength_9 = Sketch_1.setLength(SketchLine_13.result(), 0.3)
103 SketchConstraintLength_9.setName("SketchConstraintLength_12")
104 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_10.startPoint(), SketchLine_7.result(), 0.024, True)
105 SketchPoint_1 = Sketch_1.addPoint(-0.08852125812784814, -0.571165474137811)
106 SketchLine_17 = Sketch_1.addLine(-0.08940000000000001, -0.5600000000000001, -0.08852125812784814, -0.571165474137811)
107 SketchLine_17.setName("SketchLine_21")
108 SketchLine_17.result().setName("SketchLine_21")
109 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_17.startPoint())
110 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_7")
111 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_8.startPoint())
112 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_26")
113 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchPoint_1.coordinates())
114 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_27")
115 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_8.startPoint())
116 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_28")
117 SketchConstraintAngle_1 = Sketch_1.setAngleBackward(SketchLine_10.result(), SketchLine_9.result(), 166)
118 SketchConstraintAngle_2 = Sketch_1.setAngleBackward(SketchLine_17.result(), SketchLine_8.result(), 101)
119 SketchConstraintAngle_3 = Sketch_1.setAngleBackward(SketchLine_7.result(), SketchLine_17.result(), 175.5)
120 SketchConstraintLength_10 = Sketch_1.setLength(SketchLine_17.result(), 0.0112)
121 SketchConstraintLength_10.setName("SketchConstraintLength_13")
122 SketchConstraintLength_11 = Sketch_1.setLength(SketchLine_9.result(), 0.0308)
123 SketchConstraintLength_11.setName("SketchConstraintLength_14")
124 SketchConstraintLength_12 = Sketch_1.setLength(SketchLine_14.result(), 0.653)
125 SketchConstraintLength_12.setName("SketchConstraintLength_15")
126 SketchConstraintAngle_4 = Sketch_1.setAngleBackward(SketchLine_14.result(), SketchLine_15.result(), 173)
127 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
128 SketchLine_18 = SketchProjection_2.createdFeature()
129 SketchLine_18.setName("SketchLine_22")
130 SketchLine_18.result().setName("SketchLine_22")
131 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_18.result(), 0.6, True)
132 SketchLine_19 = Sketch_1.addLine(-0.08939999999999999, 0.46, -0.08940000000000001, 0.36)
133 SketchLine_19.setName("SketchLine_23")
134 SketchLine_19.result().setName("SketchLine_23")
135 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_19.startPoint())
136 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_29")
137 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_19.endPoint())
138 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_30")
139 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_16.startPoint(), SketchLine_1.startPoint())
140 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_25")
142 Sketch_1.changeFacesOrder([[SketchLine_4.result(), SketchLine_5.result(), SketchLine_6.result(), SketchLine_19.result()],
143 [SketchLine_1.result(), SketchLine_3.result(), SketchLine_19.result(), SketchLine_7.result(), SketchLine_17.result(), SketchLine_8.result(), SketchLine_9.result(), SketchLine_10.result(), SketchLine_11.result(), SketchLine_12.result(), SketchLine_13.result(), SketchLine_14.result(), SketchLine_15.result(), SketchLine_16.result()]
145 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_23f-SketchLine_7f-SketchLine_21f-SketchLine_8f-SketchLine_9f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f-SketchLine_15f-SketchLine_20r")], model.selection(), "ep", "ep")
146 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_23r")], model.selection(), "ep2", "ep2")
147 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
148 SketchLine_20 = Sketch_2.addLine(-3.021110559767089e-34, 0.6, -0.5875, 0.5401656539390112)
149 SketchLine_20.setName("SketchLine_24")
150 SketchLine_20.result().setName("SketchLine_24")
151 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_1_StartVertex"), False)
152 SketchPoint_2 = SketchProjection_3.createdFeature()
153 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_20.startPoint(), SketchPoint_2.result())
154 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_31")
155 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_20][Extrusion_1_1/To_Face]"), False)
156 SketchLine_21 = SketchProjection_4.createdFeature()
157 SketchLine_21.setName("SketchLine_25")
158 SketchLine_21.result().setName("SketchLine_25")
159 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_21.result())
160 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_32")
161 SketchLine_22 = Sketch_2.addLine(-0.5875, 0.5401656539390112, -0.5875, 0.6)
162 SketchLine_22.setName("SketchLine_26")
163 SketchLine_22.result().setName("SketchLine_26")
164 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_22.startPoint())
165 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_33")
166 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_21).startPoint(), SketchLine_22.endPoint())
167 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_34")
168 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_20]"), True)
169 SketchLine_23 = SketchProjection_5.createdFeature()
170 SketchLine_23.setName("SketchLine_27")
171 SketchLine_23.result().setName("SketchLine_27")
172 SketchProjection_6 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
173 SketchLine_24 = SketchProjection_6.createdFeature()
174 SketchLine_24.setName("SketchLine_28")
175 SketchLine_24.result().setName("SketchLine_28")
176 SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_24.result(), [SketchLine_20.result(), SketchLine_22.result()])
177 [SketchLine_25, SketchLine_26] = SketchConstraintMirror_1.mirrored()
178 SketchLine_26.setName("SketchLine_30")
179 SketchLine_26.result().setName("SketchLine_30")
180 SketchLine_25.setName("SketchLine_29")
181 SketchLine_25.result().setName("SketchLine_29")
183 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
184 Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
185 SketchLine_27 = Sketch_3.addLine(-2.319541823598068e-23, 0.1790140882246268, 0.375, 0.1396)
186 SketchLine_27.setName("SketchLine_31")
187 SketchLine_27.result().setName("SketchLine_31")
188 SketchProjection_7 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_20"), False)
189 SketchLine_28 = SketchProjection_7.createdFeature()
190 SketchLine_28.setName("SketchLine_32")
191 SketchLine_28.result().setName("SketchLine_32")
192 SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_27.startPoint(), SketchLine_28.result())
193 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_35")
194 SketchLine_29 = Sketch_3.addLine(0.375, 0.1396, 3.347, 0.1396)
195 SketchLine_29.setName("SketchLine_33")
196 SketchLine_29.result().setName("SketchLine_33")
197 SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_27.endPoint(), SketchLine_29.startPoint())
198 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_36")
199 SketchConstraintHorizontal_6 = Sketch_3.setHorizontal(SketchLine_29.result())
200 SketchLine_30 = Sketch_3.addLine(3.347, 0.1396, 3.347, 0)
201 SketchLine_30.setName("SketchLine_34")
202 SketchLine_30.result().setName("SketchLine_34")
203 SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
204 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_37")
205 SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False)
206 SketchLine_31 = SketchProjection_8.createdFeature()
207 SketchLine_31.setName("SketchLine_35")
208 SketchLine_31.result().setName("SketchLine_35")
209 SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result())
210 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_38")
211 SketchConstraintVertical_7 = Sketch_3.setVertical(SketchLine_30.result())
212 SketchLine_32 = Sketch_3.addLine(3.347, 0, 0, 0)
213 SketchLine_32.setName("SketchLine_36")
214 SketchLine_32.result().setName("SketchLine_36")
215 SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_30.endPoint(), SketchLine_32.startPoint())
216 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_39")
217 SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchAPI_Line(SketchLine_31).startPoint(), SketchLine_32.endPoint())
218 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_40")
219 SketchLine_33 = Sketch_3.addLine(-2.319541823598068e-23, 0.1790140882246268, 0, 0)
220 SketchLine_33.setName("SketchLine_37")
221 SketchLine_33.result().setName("SketchLine_37")
222 SketchConstraintCoincidence_34 = Sketch_3.setCoincident(SketchLine_27.startPoint(), SketchLine_33.startPoint())
223 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_41")
224 SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchAPI_Line(SketchLine_31).startPoint(), SketchLine_33.endPoint())
225 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_42")
226 SketchConstraintLength_13 = Sketch_3.setLength(SketchLine_32.result(), 3.347)
227 SketchConstraintLength_13.setName("SketchConstraintLength_16")
228 SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
229 SketchLine_34 = SketchProjection_9.createdFeature()
230 SketchLine_34.setName("SketchLine_38")
231 SketchLine_34.result().setName("SketchLine_38")
232 SketchConstraintDistance_3 = Sketch_3.setDistance(SketchLine_27.endPoint(), SketchLine_34.result(), 0.375, True)
233 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_27.endPoint(), SketchLine_32.result(), 0.1396, True)
234 SketchConstraintAngle_5 = Sketch_3.setAngle(SketchLine_29.result(), SketchLine_27.result(), 174)
236 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "PartSet/OX"), 360, 0)
237 Fuse_1_objects_1 = [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_1_1"), model.selection("SOLID", "Revolution_1_1")]
238 Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, False)
239 Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Fuse_1_1/Modified_Face&Sketch_1/SketchLine_20][Revolution_1_1/Generated_Face&Sketch_3/SketchLine_31]")], 0.05)
240 Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
241 SketchLine_35 = Sketch_4.addLine(3.347, 0.183, 3.347, -0.344869487384476)
242 SketchLine_35.setName("SketchLine_39")
243 SketchLine_35.result().setName("SketchLine_39")
244 SketchConstraintVertical_8 = Sketch_4.setVertical(SketchLine_35.result())
245 SketchProjection_10 = Sketch_4.addProjection(model.selection("VERTEX", "[Revolution_1_1/Generated_Face&Sketch_3/SketchLine_33][Revolution_1_1/Generated_Face&Sketch_3/SketchLine_34]"), False)
246 SketchPoint_3 = SketchProjection_10.createdFeature()
247 SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_35.result())
248 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_43")
249 SketchLine_36 = Sketch_4.addLine(3.347, 0.183, 3.744000000000001, 0.183)
250 SketchLine_36.setName("SketchLine_40")
251 SketchLine_36.result().setName("SketchLine_40")
252 SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchLine_35.startPoint(), SketchLine_36.startPoint())
253 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_44")
254 SketchConstraintHorizontal_7 = Sketch_4.setHorizontal(SketchLine_36.result())
255 SketchLine_37 = Sketch_4.addLine(3.744000000000001, 0.183, 3.744000000000001, -0.192)
256 SketchLine_37.setName("SketchLine_41")
257 SketchLine_37.result().setName("SketchLine_41")
258 SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchLine_36.endPoint(), SketchLine_37.startPoint())
259 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_45")
260 SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_37.result())
261 SketchConstraintLength_14 = Sketch_4.setLength(SketchLine_36.result(), 0.397)
262 SketchConstraintLength_14.setName("SketchConstraintLength_17")
263 SketchConstraintLength_15 = Sketch_4.setLength(SketchLine_37.result(), 0.375)
264 SketchConstraintLength_15.setName("SketchConstraintLength_18")
265 SketchArc_1 = Sketch_4.addArc(3.665500000000001, -0.192, 3.744000000000001, -0.192, 3.700263973859845, -0.2623826407679625, True)
266 SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchLine_37.endPoint(), SketchArc_1.startPoint())
267 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_46")
268 SketchConstraintTangent_1 = Sketch_4.setTangent(SketchLine_37.result(), SketchArc_1.results()[1])
269 SketchArc_2 = Sketch_4.addArc(3.347, 0.452830512615524, 3.700263973859845, -0.2623826407679625, 3.347, -0.344869487384476, True)
270 SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
271 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_47")
272 SketchConstraintTangent_2 = Sketch_4.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
273 SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchLine_35.endPoint())
274 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_48")
275 SketchConstraintRadius_1 = Sketch_4.setRadius(SketchArc_1.results()[1], 0.0785)
276 SketchProjection_11 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OX"), False)
277 SketchLine_38 = SketchProjection_11.createdFeature()
278 SketchLine_38.setName("SketchLine_42")
279 SketchLine_38.result().setName("SketchLine_42")
280 SketchConstraintDistance_5 = Sketch_4.setDistance(SketchLine_35.startPoint(), SketchLine_38.result(), 0.183, True)
281 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchArc_2.center(), SketchLine_35.result())
282 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_49")
283 SketchConstraintRadius_2 = Sketch_4.setRadius(SketchArc_2.results()[1], 0.7977)
285 Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_39r-SketchArc_2_2f-SketchArc_1_2f-SketchLine_41r-SketchLine_40r")], model.selection("EDGE", "Sketch_4/SketchLine_39"), 360, 0)
286 Fuse_2 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Fillet_1_1"), model.selection("SOLID", "Revolution_2_1")], False)
287 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_2_1/Generated_Face&Sketch_4/SketchLine_40"))
288 SketchProjection_12 = Sketch_5.addProjection(model.selection("EDGE", "Sketch_4/SketchLine_40"), False)
289 SketchLine_39 = SketchProjection_12.createdFeature()
290 SketchLine_39.setName("SketchLine_43")
291 SketchLine_39.result().setName("SketchLine_43")
292 SketchCircle_1 = Sketch_5.addCircle(3.447, 0, 0.02725)
293 SketchConstraintCoincidence_43 = Sketch_5.setCoincident(SketchLine_39.result(), SketchCircle_1.center())
294 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_50")
295 SketchConstraintRadius_3 = Sketch_5.setRadius(SketchCircle_1.results()[1], 0.02725)
296 SketchConstraintDistance_6 = Sketch_5.setDistance(SketchAPI_Line(SketchLine_39).startPoint(), SketchCircle_1.center(), 0.1, True)
298 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), 0.1123, 0, [model.selection("SOLID", "Fuse_2_1")])
299 Sketch_6 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
300 SketchProjection_13 = Sketch_6.addProjection(model.selection("EDGE", "PartSet/OX"), False)
301 SketchLine_40 = SketchProjection_13.createdFeature()
302 SketchLine_40.setName("SketchLine_44")
303 SketchLine_40.result().setName("SketchLine_44")
304 SketchCircle_2 = Sketch_6.addCircle(3.347, 0, 0.0535464)
305 SketchConstraintRadius_4 = Sketch_6.setRadius(SketchCircle_2.results()[1], 0.0535464)
306 SketchIntersectionPoint_1 = Sketch_6.addIntersectionPoint(model.selection("EDGE", "Sketch_4/SketchLine_39"), False)
307 [SketchPoint_4] = SketchIntersectionPoint_1.intersectionPoints()
308 SketchConstraintCoincidence_44 = Sketch_6.setCoincident(SketchCircle_2.center(), SketchAPI_Point(SketchPoint_4).coordinates())
309 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_51")
311 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), 0, 0.5586)
312 Fuse_3 = model.addFuse(Part_1_doc, [model.selection("SOLID", "ExtrusionFuse_1_1"), model.selection("SOLID", "Extrusion_3_1")], False)
313 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 1.2912, False)
314 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
315 SketchLine_41 = Sketch_7.addLine(-0.80851, 0.003178, -0.80851, 0.253178)
316 SketchLine_41.setName("SketchLine_45")
317 SketchLine_41.result().setName("SketchLine_45")
318 SketchConstraintVertical_10 = Sketch_7.setVertical(SketchLine_41.result())
319 SketchLine_42 = Sketch_7.addLine(-0.80851, 0.253178, -0.80851, 0.003178)
320 SketchLine_42.setName("SketchLine_46")
321 SketchLine_42.result().setName("SketchLine_46")
322 SketchConstraintCoincidence_45 = Sketch_7.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
323 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_52")
324 SketchConstraintCoincidence_46 = Sketch_7.setCoincident(SketchLine_41.startPoint(), SketchLine_42.endPoint())
325 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_53")
326 SketchProjection_14 = Sketch_7.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
327 SketchLine_43 = SketchProjection_14.createdFeature()
328 SketchLine_43.setName("SketchLine_47")
329 SketchLine_43.result().setName("SketchLine_47")
330 SketchProjection_15 = Sketch_7.addProjection(model.selection("EDGE", "PartSet/OY"), False)
331 SketchLine_44 = SketchProjection_15.createdFeature()
332 SketchLine_44.setName("SketchLine_48")
333 SketchLine_44.result().setName("SketchLine_48")
334 SketchConstraintDistance_7 = Sketch_7.setDistance(SketchLine_41.startPoint(), SketchLine_43.result(), 0.80851, True)
335 SketchConstraintDistance_7.setName("SketchConstraintDistance_8")
336 SketchConstraintLength_16 = Sketch_7.setLength(SketchLine_41.result(), 0.25)
337 SketchConstraintLength_16.setName("SketchConstraintLength_19")
338 SketchArc_3 = Sketch_7.addArc(-0.7325, 0.253178, -0.80851, 0.253178, -0.7325, 0.3291879999999999, True)
339 SketchConstraintCoincidence_47 = Sketch_7.setCoincident(SketchLine_41.endPoint(), SketchArc_3.startPoint())
340 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_54")
341 SketchConstraintTangent_3 = Sketch_7.setTangent(SketchLine_41.result(), SketchArc_3.results()[1])
342 SketchLine_45 = Sketch_7.addLine(-0.7325, 0.253178, -0.7325, 0.3291879999999999)
343 SketchLine_45.setName("SketchLine_49")
344 SketchLine_45.result().setName("SketchLine_49")
345 SketchLine_45.setAuxiliary(True)
346 SketchConstraintCoincidence_48 = Sketch_7.setCoincident(SketchArc_3.center(), SketchLine_45.startPoint())
347 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_55")
348 SketchConstraintCoincidence_49 = Sketch_7.setCoincident(SketchArc_3.endPoint(), SketchLine_45.endPoint())
349 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_56")
350 SketchConstraintVertical_11 = Sketch_7.setVertical(SketchLine_45.result())
351 SketchLine_46 = Sketch_7.addLine(-0.7325, 0.3291879999999999, -0.6591320000000001, 0.3291879999999999)
352 SketchLine_46.setName("SketchLine_50")
353 SketchLine_46.result().setName("SketchLine_50")
354 SketchConstraintCoincidence_50 = Sketch_7.setCoincident(SketchArc_3.endPoint(), SketchLine_46.startPoint())
355 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_57")
356 SketchConstraintHorizontal_8 = Sketch_7.setHorizontal(SketchLine_46.result())
357 SketchConstraintLength_17 = Sketch_7.setLength(SketchLine_46.result(), 0.073368)
358 SketchConstraintLength_17.setName("SketchConstraintLength_20")
359 SketchLine_47 = Sketch_7.addLine(-0.4815101245041479, 0.278, 0, -1.355252715606881e-20)
360 SketchLine_47.setName("SketchLine_51")
361 SketchLine_47.result().setName("SketchLine_51")
362 SketchLine_48 = Sketch_7.addLine(0, -1.355252715606881e-20, -0.3375518398718391, -1.355252715606881e-20)
363 SketchLine_48.setName("SketchLine_52")
364 SketchLine_48.result().setName("SketchLine_52")
365 SketchLine_48.setAuxiliary(True)
366 SketchConstraintCoincidence_51 = Sketch_7.setCoincident(SketchLine_47.endPoint(), SketchLine_48.startPoint())
367 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_58")
368 SketchConstraintHorizontal_9 = Sketch_7.setHorizontal(SketchLine_48.result())
369 SketchConstraintAngle_6 = Sketch_7.setAngle(SketchLine_47.result(), SketchLine_48.result(), 30)
370 SketchConstraintCoincidence_52 = Sketch_7.setCoincident(SketchLine_47.endPoint(), SketchAPI_Line(SketchLine_44).startPoint())
371 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_59")
372 SketchConstraintDistance_8 = Sketch_7.setDistance(SketchLine_47.startPoint(), SketchLine_44.result(), 0.278, True)
373 SketchConstraintDistance_8.setName("SketchConstraintDistance_9")
374 SketchConstraintDistance_9 = Sketch_7.setDistance(SketchLine_45.startPoint(), SketchLine_43.result(), 0.7325, True)
375 SketchConstraintDistance_9.setName("SketchConstraintDistance_10")
376 SketchArc_4 = Sketch_7.addArc(-0.6591320000000001, -0.004579113372898896, -0.6591320000000001, 0.3291879999999999, -0.4815101245041478, 0.278, True)
377 SketchConstraintCoincidence_53 = Sketch_7.setCoincident(SketchLine_46.endPoint(), SketchArc_4.startPoint())
378 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_60")
379 SketchConstraintTangent_4 = Sketch_7.setTangent(SketchLine_46.result(), SketchArc_4.results()[1])
380 SketchConstraintCoincidence_54 = Sketch_7.setCoincident(SketchArc_4.endPoint(), SketchLine_47.startPoint())
381 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_61")
382 SketchConstraintDistance_10 = Sketch_7.setDistance(SketchLine_41.startPoint(), SketchLine_48.result(), 0.003178, True)
383 SketchConstraintDistance_10.setName("SketchConstraintDistance_13")
385 Plane_5 = model.addPlane(Part_1_doc, model.selection("EDGE", "PartSet/OZ"), model.selection("VERTEX", "Sketch_7/SketchLine_45_StartVertex"), True)
386 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
387 SketchProjection_16 = Sketch_8.addProjection(model.selection("VERTEX", "Sketch_7/SketchLine_45_StartVertex"), False)
388 SketchPoint_5 = SketchProjection_16.createdFeature()
389 SketchCircle_3 = Sketch_8.addCircle(1.2912, -0.80851, 0.02655)
390 SketchConstraintCoincidence_55 = Sketch_8.setCoincident(SketchPoint_5.result(), SketchCircle_3.center())
391 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_62")
392 SketchConstraintRadius_5 = Sketch_8.setRadius(SketchCircle_3.results()[1], 0.02655)
394 Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_3_2f")])
395 Wire_1_objects = [model.selection("EDGE", "Sketch_7/SketchLine_45"), model.selection("EDGE", "Sketch_7/SketchArc_3_2"), model.selection("EDGE", "Sketch_7/SketchLine_50"), model.selection("EDGE", "Sketch_7/SketchArc_4_2"), model.selection("EDGE", "Sketch_7/SketchLine_51")]
396 Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
397 Pipe_1 = model.addPipe(Part_1_doc, [model.selection("FACE", "Face_1_1")], model.selection("WIRE", "Wire_1_1"))
398 Fuse_4 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Pipe_1_1"), model.selection("SOLID", "Fuse_3_1")], False)
399 Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), 1.1407, True)
400 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_3"))
401 SketchLine_49 = Sketch_9.addLine(0.5219, -0.3643, 0.5219, -0.1143)
402 SketchLine_49.setName("SketchLine_53")
403 SketchLine_49.result().setName("SketchLine_53")
404 SketchConstraintVertical_12 = Sketch_9.setVertical(SketchLine_49.result())
405 SketchProjection_17 = Sketch_9.addProjection(model.selection("EDGE", "PartSet/OY"), False)
406 SketchLine_50 = SketchProjection_17.createdFeature()
407 SketchLine_50.setName("SketchLine_54")
408 SketchLine_50.result().setName("SketchLine_54")
409 SketchProjection_18 = Sketch_9.addProjection(model.selection("EDGE", "PartSet/OX"), False)
410 SketchLine_51 = SketchProjection_18.createdFeature()
411 SketchLine_51.setName("SketchLine_55")
412 SketchLine_51.result().setName("SketchLine_55")
413 SketchConstraintDistance_11 = Sketch_9.setDistance(SketchLine_49.endPoint(), SketchLine_50.result(), 0.5219, True)
414 SketchConstraintDistance_11.setName("SketchConstraintDistance_11")
415 SketchConstraintDistance_12 = Sketch_9.setDistance(SketchLine_49.startPoint(), SketchLine_51.result(), 0.3643, True)
416 SketchConstraintDistance_12.setName("SketchConstraintDistance_12")
417 SketchConstraintLength_18 = Sketch_9.setLength(SketchLine_49.result(), 0.25)
418 SketchConstraintLength_18.setName("SketchConstraintLength_21")
419 SketchArc_5 = Sketch_9.addArc(0.4075999999999999, -0.1143, 0.5219, -0.1143, 0.4075999999999999, 2.344010062074957e-33, False)
420 SketchConstraintCoincidence_56 = Sketch_9.setCoincident(SketchLine_49.endPoint(), SketchArc_5.startPoint())
421 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_63")
422 SketchConstraintTangent_5 = Sketch_9.setTangent(SketchLine_49.result(), SketchArc_5.results()[1])
423 SketchLine_52 = Sketch_9.addLine(0.4075999999999999, 2.344010062074957e-33, 0, -1.207680510878222e-22)
424 SketchLine_52.setName("SketchLine_56")
425 SketchLine_52.result().setName("SketchLine_56")
426 SketchConstraintCoincidence_57 = Sketch_9.setCoincident(SketchArc_5.endPoint(), SketchLine_52.startPoint())
427 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_64")
428 SketchConstraintHorizontal_10 = Sketch_9.setHorizontal(SketchLine_52.result())
429 SketchConstraintCoincidence_58 = Sketch_9.setCoincident(SketchLine_52.endPoint(), SketchAPI_Line(SketchLine_50).startPoint())
430 SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_65")
431 SketchLine_53 = Sketch_9.addLine(0.4075999999999999, 2.344010062074957e-33, 0.4075999999999999, -0.1143)
432 SketchLine_53.setName("SketchLine_57")
433 SketchLine_53.result().setName("SketchLine_57")
434 SketchLine_53.setAuxiliary(True)
435 SketchConstraintCoincidence_59 = Sketch_9.setCoincident(SketchArc_5.endPoint(), SketchLine_53.startPoint())
436 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_66")
437 SketchConstraintCoincidence_60 = Sketch_9.setCoincident(SketchArc_5.center(), SketchLine_53.endPoint())
438 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_67")
439 SketchConstraintVertical_13 = Sketch_9.setVertical(SketchLine_53.result())
441 Plane_7 = model.addPlane(Part_1_doc, model.selection("EDGE", "PartSet/OY"), model.selection("VERTEX", "Sketch_9/SketchLine_53_StartVertex"), True)
442 Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_4"))
443 SketchProjection_19 = Sketch_10.addProjection(model.selection("VERTEX", "Sketch_9/SketchLine_53_StartVertex"), False)
444 SketchPoint_6 = SketchProjection_19.createdFeature()
445 SketchCircle_4 = Sketch_10.addCircle(0.5219, 1.1407, 0.05355)
446 SketchConstraintCoincidence_61 = Sketch_10.setCoincident(SketchPoint_6.result(), SketchCircle_4.center())
447 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_68")
448 SketchConstraintRadius_6 = Sketch_10.setRadius(SketchCircle_4.results()[1], 0.05355)
450 Face_2 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_10/SketchCircle_4_2")])
451 Wire_2_objects = [model.selection("EDGE", "Sketch_9/SketchLine_53"), model.selection("EDGE", "Sketch_9/SketchArc_5_2"), model.selection("EDGE", "Sketch_9/SketchLine_56")]
452 Wire_2 = model.addWire(Part_1_doc, Wire_2_objects)
453 Pipe_2 = model.addPipe(Part_1_doc, [model.selection("FACE", "Face_2_1")], model.selection("WIRE", "Wire_2_1"))
454 Fuse_5 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Pipe_2_1"), model.selection("SOLID", "Fuse_4_1")], False)
455 Symmetry_1 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", "Fuse_5_1")], model.selection("FACE", "PartSet/YOZ"), False)
456 Symmetry_2 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", "Symmetry_1_1")], model.selection("FACE", "PartSet/XOZ"), False)
457 Group_1 = model.addGroup(Part_1_doc, "Faces", [model.selection("FACE", "Symmetry_2_1/MF:Symmetried&Pipe_2_1/From_Face_1")])
458 Group_1.setName("Outlet_1")
459 Group_1.result().setName("Outlet_1")
460 Group_2 = model.addGroup(Part_1_doc, "Faces", [model.selection("FACE", "Symmetry_2_1/MF:Symmetried&Pipe_1_1/From_Face_1")])
461 Group_2.setName("Inlet_1")
462 Group_2.result().setName("Inlet_1")
463 Group_3 = model.addGroup(Part_1_doc, "Faces", [model.selection("FACE", "Symmetry_2_1/MF:Symmetried&Extrusion_3_1/From_Face")])
464 Group_3.setName("Outlet_2")
465 Group_3.result().setName("Outlet_2")
466 Group_4 = model.addGroup(Part_1_doc, "Faces", [model.selection("FACE", "Symmetry_2_1/MF:Symmetried&ExtrusionFuse_1_1/To_Face")])
467 Group_4.setName("Inlet_2")
468 Group_4.result().setName("Inlet_2")
469 Group_5 = model.addGroup(Part_1_doc, "Faces", [model.selection("SOLID", "Symmetry_2_1")])
470 Group_5.setName("Group_faces")
471 Group_5.result().setName("Group_faces")
472 GroupSubstraction_1_objects_2 = [model.selection("COMPOUND", "Outlet_1"), model.selection("COMPOUND", "Inlet_1"), model.selection("COMPOUND", "Outlet_2"), model.selection("COMPOUND", "Inlet_2")]
473 GroupSubstraction_1 = model.addGroupSubstraction(Part_1_doc, [model.selection("COMPOUND", "Group_faces")], GroupSubstraction_1_objects_2)
474 GroupSubstraction_1.result().setName("Wall")
477 from GeomAPI import GeomAPI_Shape
479 model.testNbResults(Symmetry_2, 1)
480 model.testNbSubResults(Symmetry_2, [0])
481 model.testNbSubShapes(Symmetry_2, GeomAPI_Shape.SOLID, [1])
482 model.testNbSubShapes(Symmetry_2, GeomAPI_Shape.FACE, [44])
483 model.testNbSubShapes(Symmetry_2, GeomAPI_Shape.EDGE, [192])
484 model.testNbSubShapes(Symmetry_2, GeomAPI_Shape.VERTEX, [384])
485 model.testResultsVolumes(Symmetry_2, [0.714262940088946862715602037])
487 from ModelAPI import *
488 aFactory = ModelAPI_Session.get().validators()
490 # Check that the features are not in error
491 for i in range(Part_1_doc.size("Features")):
492 feature = objectToFeature(Part_1_doc.object("Features", i))
493 name = feature.name()
494 error = feature.error()
495 assert(error == ''), "The feature {0} is in error: {1}".format(name, error)
496 assert(aFactory.validate(feature)), "The feature {0} is in error: {1}".format(name, error)
498 assert(Part_1_doc.size("Groups") == 6)
500 assert(model.checkPythonDump())
