src/ModelAPI/Test/TestWeakNaming2445.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 model.addParameter(Part_1_doc, "R1", "50")
  27 model.addParameter(Part_1_doc, "L1", "100")
  28 model.addParameter(Part_1_doc, "R2", "40")
  29 model.addParameter(Part_1_doc, "L2", "50")
  30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  31 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  32 SketchPoint_1 = SketchProjection_1.createdFeature()
  33 SketchCircle_1 = Sketch_1.addCircle(0, 0, 50)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
  35 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], "R1")
  36 SketchLine_1 = Sketch_1.addLine(0, 49.99999999999999, 0, 31.81980515339405)
  37 SketchLine_2 = Sketch_1.addLine(-1.202451477893311e-021, -31.81980515339534, 0, -50)
  38 SketchLine_2.setName("SketchLine_3")
  39 SketchLine_2.result().setName("SketchLine_3")
  40 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchCircle_1.results()[1])
  41 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_4")
  42 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  43 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
  44 SketchLine_3 = SketchProjection_2.createdFeature()
  45 SketchLine_3.setName("SketchLine_4")
  46 SketchLine_3.result().setName("SketchLine_4")
  47 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.result(), SketchLine_1.startPoint())
  48 SketchConstraintCollinear_1 = Sketch_1.setCollinear(SketchLine_1.result(), SketchLine_2.result())
  49 SketchLine_4 = Sketch_1.addLine(0, 31.81980515339405, 31.81980515339462, -6.650124210799604e-013)
  50 SketchLine_4.setName("SketchLine_5")
  51 SketchLine_4.result().setName("SketchLine_5")
  52 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_4.startPoint())
  53 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_5")
  54 SketchLine_5 = Sketch_1.addLine(31.81980515339462, -6.650124210799604e-013, -1.202451477893311e-021, -31.81980515339534)
  55 SketchLine_5.setName("SketchLine_6")
  56 SketchLine_5.result().setName("SketchLine_6")
  57 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  58 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_6")
  59 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_5.endPoint())
  60 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_7")
  61 SketchLine_6 = Sketch_1.addLine(-1.202451477893311e-021, -31.81980515339534, -31.8198051533955, -6.650124202329274e-013)
  62 SketchLine_6.setName("SketchLine_7")
  63 SketchLine_6.result().setName("SketchLine_7")
  64 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_6.startPoint())
  65 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
  66 SketchLine_7 = Sketch_1.addLine(-31.8198051533955, -6.650124202329274e-013, -8.789247626282909e-013, 31.81980515339405)
  67 SketchLine_7.setName("SketchLine_8")
  68 SketchLine_7.result().setName("SketchLine_8")
  69 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  70 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
  71 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_7.result(), SketchLine_4.result())
  72 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_7.result(), SketchLine_5.result())
  73 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_4.result(), SketchLine_6.result())
  74 SketchLine_8 = Sketch_1.addLine(-31.8198051533955, -6.650124202329274e-013, -50, -8.919190713816664e-015)
  75 SketchLine_8.setName("SketchLine_9")
  76 SketchLine_8.result().setName("SketchLine_9")
  77 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
  78 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
  79 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchCircle_1.results()[1])
  80 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
  81 SketchLine_9 = Sketch_1.addLine(31.81980515339462, -6.650124210799604e-013, 50, -8.919190733668999e-015)
  82 SketchLine_9.setName("SketchLine_10")
  83 SketchLine_9.result().setName("SketchLine_10")
  84 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_9.startPoint())
  85 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
  86 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchCircle_1.results()[1])
  87 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_14")
  88 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_6.result())
  89 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_7.result(), SketchLine_5.result())
  90 SketchConstraintCollinear_2 = Sketch_1.setCollinear(SketchLine_8.result(), SketchLine_9.result())
  91 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_8.result())
  92 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_8.result(), SketchLine_1.result())
  93 SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_2.result(), SketchLine_1.result())
  94 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "R1*0.9")
  95 SketchConstraintLength_1.setName("SketchConstraintLength_2")
  96 model.do()
  97 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "L1", "L1")
  98 Extrusion_1.result().setName("tuyau_principal")
  99 Extrusion_1.result().subResult(0).setName("Extrusion_1_1_1")
 100 Extrusion_1.result().subResult(1).setName("Extrusion_1_1_2")
 101 Extrusion_1.result().subResult(2).setName("Extrusion_1_1_3")
 102 Extrusion_1.result().subResult(3).setName("Extrusion_1_1_4")
 103 Extrusion_1.result().subResult(4).setName("Extrusion_1_1_5")
 104 Rotation_1 = model.addRotation(Part_1_doc, [model.selection("COMPSOLID", "tuyau_principal")], model.selection("EDGE", "PartSet/OX"), 45)
 105 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
 106 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
 107 SketchPoint_2 = SketchProjection_3.createdFeature()
 108 SketchCircle_2 = Sketch_2.addCircle(0, 0, 40)
 109 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchCircle_2.center())
 110 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15")
 111 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_2.results()[1], "R2")
 112 model.do()
 113 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 0, "R1+L2")
 114 Extrusion_2.result().setName("piquage")
 115 Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "piquage")], [model.selection("COMPSOLID", "tuyau_principal")])
 116 Smash_1.result().setName("té")
 117 Smash_1.result().setColor(153, 76, 153)
 118 Smash_1.result().subResult(0).setName("Smash_1_1_1")
 119 Smash_1.result().subResult(0).setColor(51, 102, 51)
 120 Smash_1.result().subResult(1).setName("Smash_1_1_2")
 121 Smash_1.result().subResult(1).setColor(0, 204, 0)
 122 Smash_1.result().subResult(2).setName("Smash_1_1_3")
 123 Smash_1.result().subResult(2).setColor(204, 102, 204)
 124 Smash_1.result().subResult(3).setName("Smash_1_1_4")
 125 Smash_1.result().subResult(3).setColor(204, 102, 204)
 126 Smash_1.result().subResult(4).setName("Smash_1_1_5")
 127 Smash_1.result().subResult(4).setColor(204, 0, 204)
 128 Smash_1.result().subResult(5).setName("Smash_1_1_6")
 129 Smash_1.result().subResult(5).setColor(76, 76, 153)
 130 Recover_1 = model.addRecover(Part_1_doc, Smash_1, [Extrusion_2.result(), Rotation_1.result()])
 131 Recover_1.result().setName("tuyau_principal")
 132 Recover_1.result().subResult(0).setName("Recover_1_1_1")
 133 Recover_1.result().subResult(1).setName("Recover_1_1_2")
 134 Recover_1.result().subResult(2).setName("Recover_1_1_3")
 135 Recover_1.result().subResult(3).setName("Recover_1_1_4")
 136 Recover_1.result().subResult(4).setName("Recover_1_1_5")
 137 Recover_1.results()[1].setName("piquage")
 138 Intersection_1 = model.addIntersection(Part_1_doc, [model.selection("COMPSOLID", "tuyau_principal"), model.selection("SOLID", "piquage")])
 139 Intersection_1.result().setName("intersection")
 140 Intersection_1.result().subResult(0).setName("Intersection_1_1_1")
 141 Intersection_1.result().subResult(1).setName("Intersection_1_1_2")
 142 Intersection_1.result().subResult(2).setName("Intersection_1_1_3")
 143 Intersection_1.result().subResult(3).setName("Intersection_1_1_4")
 144 Intersection_1.result().subResult(4).setName("Intersection_1_1_5")
 145 Intersection_1.result().subResult(5).setName("Intersection_1_1_6")
 146 Intersection_1.result().subResult(6).setName("Intersection_1_1_7")
 147 Intersection_1.result().subResult(7).setName("Intersection_1_1_8")
 148 Intersection_1.result().subResult(8).setName("Intersection_1_1_9")
 149 Intersection_1.result().subResult(9).setName("Intersection_1_1_10")
 150 Intersection_1.result().subResult(10).setName("Intersection_1_1_11")
 151 Intersection_1.result().subResult(11).setName("Intersection_1_1_12")
 152 Intersection_1.result().subResult(12).setName("Intersection_1_1_13")
 153 Intersection_1.result().subResult(13).setName("Intersection_1_1_14")
 154 Intersection_1.result().subResult(14).setName("Intersection_1_1_15")
 155 Intersection_1.result().subResult(15).setName("Intersection_1_1_16")
 156 Intersection_1.result().subResult(16).setName("Intersection_1_1_17")
 157 Edge_1_objects = [model.selection("EDGE", "Intersection_1_1_3"), model.selection("EDGE", "Intersection_1_1_12"), model.selection("EDGE", "Intersection_1_1_14"), model.selection("EDGE", "Intersection_1_1_5"), model.selection("EDGE", "Intersection_1_1_1")]
 158 Edge_1 = model.addEdge(Part_1_doc, Edge_1_objects)
 159 Edge_1.results()[1].setName("intersection_1")
 160 Edge_1.results()[2].setName("intersection_2")
 161 Edge_1.results()[3].setName("intersection_3")
 162 Edge_1.results()[4].setName("intersection_4")
 163 model.do()
 164 model.testHaveNamingSubshapes(Edge_1, model, Part_1_doc)
 165 model.end()