src/ModelAPI/Test/TestWeakNaming2375.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 # -*- coding: utf-8 -*-
  22
  23 from SketchAPI import *
  24
  25 from salome.shaper import model
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31 model.addParameter(Part_1_doc, "angle", "27.5")
  32 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  33 SketchLine_1 = Sketch_1.addLine(0, 4, 6.2, 4)
  34 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
  35 SketchLine_2 = SketchProjection_1.createdFeature()
  36 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  37 SketchLine_3 = Sketch_1.addLine(6.2, 4, 6.2, 2.5)
  38 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  39 SketchLine_4 = Sketch_1.addLine(6.2, 2.5, 3.5, 2)
  40 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  41 SketchLine_5 = Sketch_1.addLine(3.5, 2, 3.5, 0)
  42 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  43 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
  44 SketchLine_6 = SketchProjection_2.createdFeature()
  45 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
  46 SketchLine_7 = Sketch_1.addLine(3.5, 0, 0, 0)
  47 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
  48 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_7.endPoint())
  49 SketchLine_8 = Sketch_1.addLine(0, 4, 0, 0)
  50 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.startPoint())
  51 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_8.endPoint())
  52 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
  53 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
  54 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  55 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 6.2)
  56 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_7.result(), 3.5)
  57 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_5.result(), 2)
  58 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_3.result(), 1.5)
  59 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_8.result(), 4)
  60 model.do()
  61 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_8f-SketchLine_7r-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_1r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
  62 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1"))
  63 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_3][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1]__cc"), False)
  64 SketchPoint_1 = SketchProjection_3.createdFeature()
  65 SketchCircle_1 = Sketch_2.addCircle(0, 0, 4.75)
  66 SketchCircle_1.setAuxiliary(True)
  67 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
  68 SketchCircle_2 = Sketch_2.addCircle(4.113620667976081, 2.375000000000003, 1.1)
  69 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_2.center())
  70 SketchCircle_3 = Sketch_2.addCircle(-4.113620667974014, 2.375000000003604, 1.1)
  71 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_3.center())
  72 SketchCircle_4 = Sketch_2.addCircle(4.163806340121522e-12, -4.75000000000001, 1.1)
  73 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_4.center())
  74 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchCircle_2.results()[1], SketchCircle_3.results()[1])
  75 SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
  76 SketchLine_9 = Sketch_2.addLine(0, 0, 4.113620667976081, 2.375000000000003)
  77 SketchLine_9.setAuxiliary(True)
  78 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.startPoint())
  79 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_9.endPoint())
  80 SketchLine_10 = Sketch_2.addLine(-4.113620667974014, 2.375000000003604, 0, 0)
  81 SketchLine_10.setAuxiliary(True)
  82 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchCircle_3.center(), SketchLine_10.startPoint())
  83 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_10.endPoint())
  84 SketchLine_11 = Sketch_2.addLine(4.163806340121522e-12, -4.75000000000001, 0, 0)
  85 SketchLine_11.setAuxiliary(True)
  86 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchCircle_4.center(), SketchLine_11.startPoint())
  87 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_11.endPoint())
  88 SketchConstraintRadius_1 = Sketch_2.setRadius(SketchCircle_2.results()[1], 1.1)
  89 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1"), False)
  90 SketchLine_12 = SketchProjection_4.createdFeature()
  91 SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_12.result(), 30.00000000000006)
  92 SketchConstraintAngle_2 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_10.result(), 119.9999999999498)
  93 SketchConstraintAngle_3 = Sketch_2.setAngle(SketchLine_10.result(), SketchLine_11.result(), 120.0000000001004)
  94 SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_9.result(), 4.75)
  95 SketchCircle_5 = Sketch_2.addCircle(2.552173139647412, 4.006109367611208, 0.65)
  96 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_5.center())
  97 SketchCircle_6 = Sketch_2.addCircle(2.552173139647412, 4.006109367611208, 0.8)
  98 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_6.center())
  99 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchCircle_6.center())
 100 SketchCircle_7 = Sketch_2.addCircle(4.745479052513824, 0.20719208998535, 0.65)
 101 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_7.center())
 102 SketchCircle_8 = Sketch_2.addCircle(4.745479052513824, 0.20719208998535, 0.8)
 103 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_8.center())
 104 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchCircle_8.center())
 105 SketchLine_13 = Sketch_2.addLine(0, 0, 2.552173139647412, 4.006109367611208)
 106 SketchLine_13.setAuxiliary(True)
 107 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_13.startPoint())
 108 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchLine_13.endPoint())
 109 SketchLine_14 = Sketch_2.addLine(0, 0, 4.745479052513824, 0.20719208998535)
 110 SketchLine_14.setAuxiliary(True)
 111 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_14.startPoint())
 112 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchLine_14.endPoint())
 113 SketchConstraintEqual_3 = Sketch_2.setEqual(SketchCircle_7.results()[1], SketchCircle_5.results()[1])
 114 SketchConstraintEqual_4 = Sketch_2.setEqual(SketchCircle_8.results()[1], SketchCircle_6.results()[1])
 115 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_7.results()[1], 0.65)
 116 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_8.results()[1], 0.8)
 117 SketchCircle_9 = Sketch_2.addCircle(-2.552173139482203, 4.006109367717388, 0.65)
 118 SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_9.center())
 119 SketchCircle_10 = Sketch_2.addCircle(-4.745479052513825, 0.2071920899853395, 0.65)
 120 SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_10.center())
 121 SketchCircle_11 = Sketch_2.addCircle(-2.552173139482203, 4.006109367717388, 0.8)
 122 SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_11.center())
 123 SketchCircle_12 = Sketch_2.addCircle(-4.745479052513825, 0.2071920899853395, 0.8)
 124 SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchCircle_10.center(), SketchCircle_12.center())
 125 SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchCircle_9.center(), SketchCircle_11.center())
 126 SketchConstraintEqual_5 = Sketch_2.setEqual(SketchCircle_6.results()[1], SketchCircle_11.results()[1])
 127 SketchConstraintEqual_6 = Sketch_2.setEqual(SketchCircle_5.results()[1], SketchCircle_9.results()[1])
 128 SketchConstraintEqual_7 = Sketch_2.setEqual(SketchCircle_9.results()[1], SketchCircle_10.results()[1])
 129 SketchConstraintEqual_8 = Sketch_2.setEqual(SketchCircle_11.results()[1], SketchCircle_12.results()[1])
 130 SketchLine_15 = Sketch_2.addLine(-2.552173139482203, 4.006109367717388, 0, 0)
 131 SketchLine_15.setAuxiliary(True)
 132 SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchCircle_9.center(), SketchLine_15.startPoint())
 133 SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_15.endPoint())
 134 SketchLine_16 = Sketch_2.addLine(-4.745479052513825, 0.2071920899853395, 0, 0)
 135 SketchLine_16.setAuxiliary(True)
 136 SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchCircle_10.center(), SketchLine_16.startPoint())
 137 SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_16.endPoint())
 138 SketchCircle_13 = Sketch_2.addCircle(-2.193305912870557, -4.213301457594897, 0.8)
 139 SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_13.center())
 140 SketchCircle_14 = Sketch_2.addCircle(2.193305912973027, -4.213301457541542, 0.8)
 141 SketchConstraintCoincidence_40 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_14.center())
 142 SketchConstraintEqual_9 = Sketch_2.setEqual(SketchCircle_14.results()[1], SketchCircle_13.results()[1])
 143 SketchConstraintEqual_10 = Sketch_2.setEqual(SketchCircle_12.results()[1], SketchCircle_13.results()[1])
 144 SketchLine_17 = Sketch_2.addLine(0, 0, -2.193305912870557, -4.213301457594897)
 145 SketchLine_17.setAuxiliary(True)
 146 SketchConstraintCoincidence_41 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_17.startPoint())
 147 SketchConstraintCoincidence_42 = Sketch_2.setCoincident(SketchCircle_13.center(), SketchLine_17.endPoint())
 148 SketchLine_18 = Sketch_2.addLine(0, 0, 2.193305912973027, -4.213301457541542)
 149 SketchLine_18.setAuxiliary(True)
 150 SketchConstraintCoincidence_43 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_18.startPoint())
 151 SketchConstraintCoincidence_44 = Sketch_2.setCoincident(SketchCircle_14.center(), SketchLine_18.endPoint())
 152 SketchConstraintAngle_4 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_14.result(), "angle")
 153 SketchConstraintAngle_5 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_13.result(), "angle")
 154 SketchConstraintAngle_6 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_15.result(), "angle")
 155 SketchConstraintAngle_7 = Sketch_2.setAngleBackward(SketchLine_16.result(), SketchLine_10.result(), "angle")
 156 SketchConstraintAngle_8 = Sketch_2.setAngle(SketchLine_17.result(), SketchLine_11.result(), "angle")
 157 SketchConstraintAngle_9 = Sketch_2.setAngle(SketchLine_11.result(), SketchLine_18.result(), "angle")
 158 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
 159 SketchLine_19 = SketchProjection_5.createdFeature()
 160 SketchCircle_15 = Sketch_2.addCircle(0, 5, 0.45)
 161 SketchConstraintCoincidence_45 = Sketch_2.setCoincident(SketchLine_19.result(), SketchCircle_15.center())
 162 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_15.results()[1], 0.45)
 163 SketchLine_20 = Sketch_2.addLine(0, 0, 4.385635518227006, -2.793957963403483)
 164 SketchLine_20.setAuxiliary(True)
 165 SketchConstraintCoincidence_46 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_20.startPoint())
 166 SketchCircle_16 = Sketch_2.addCircle(3.373565783251674, -2.149198433387089, 0.3)
 167 SketchConstraintCoincidence_47 = Sketch_2.setCoincident(SketchLine_20.result(), SketchCircle_16.center())
 168 SketchCircle_17 = Sketch_2.addCircle(4.385635518227006, -2.793957963403483, 0.5)
 169 SketchConstraintCoincidence_48 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchCircle_17.center())
 170 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_16.results()[1], 0.3)
 171 SketchConstraintRadius_6 = Sketch_2.setRadius(SketchCircle_17.results()[1], 0.5)
 172 SketchConstraintAngle_10 = Sketch_2.setAngleBackward(SketchLine_14.result(), SketchLine_20.result(), 35.00000000000006)
 173 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchCircle_15.center(), SketchLine_12.result(), 5, True)
 174 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_16.center(), SketchAPI_Line(SketchLine_19).startPoint(), 4, True)
 175 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_19).startPoint(), SketchCircle_17.center(), 5.2, True)
 176 model.do()
 177 ExtrusionCut_1_objects_1 = [model.selection("FACE", "Sketch_2/Face-SketchCircle_9_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_17_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_16_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")]
 178 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 179 ExtrusionCut_2_objects_1 = [model.selection("WIRE", "Sketch_2/Face-SketchCircle_11_2f-SketchCircle_9_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_12_2f-SketchCircle_10_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_6_2f-SketchCircle_5_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_8_2f-SketchCircle_7_2r_wire")]
 180 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_1_1")])
 181 Axis_4 = model.addAxis(Part_1_doc, 0, -1, -10)
 182 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_15_2f")], model.selection("EDGE", "Axis_1"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 183 ExtrusionCut_3.result().setDeflection(1e-05)
 184 Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
 185 SketchLine_21 = Sketch_3.addLine(3.5, 2.508501119175777, 3.5, 4.934853156880259)
 186 SketchLine_22 = Sketch_3.addLine(3.5, 4.934853156880259, 6.2, 4.934853156880259)
 187 SketchConstraintCoincidence_49 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
 188 SketchLine_23 = Sketch_3.addLine(6.2, 4.934853156880259, 6.2, 3.008501119175777)
 189 SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
 190 SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_3"), False)
 191 SketchLine_24 = SketchProjection_6.createdFeature()
 192 SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_24.result())
 193 SketchLine_25 = Sketch_3.addLine(6.2, 3.008501119175777, 3.5, 2.508501119175777)
 194 SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_25.startPoint())
 195 SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_25.endPoint())
 196 SketchProjection_7 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_5"), False)
 197 SketchLine_26 = SketchProjection_7.createdFeature()
 198 SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_26.result())
 199 SketchConstraintCoincidence_55 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_26.result())
 200 SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_22.result())
 201 SketchConstraintCoincidence_56 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_24.result())
 202 SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_4"), False)
 203 SketchLine_27 = SketchProjection_8.createdFeature()
 204 SketchConstraintParallel_1 = Sketch_3.setParallel(SketchLine_25.result(), SketchLine_27.result())
 205 SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_4"), False)
 206 SketchLine_28 = SketchProjection_9.createdFeature()
 207 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_21.startPoint(), SketchLine_28.result(), 0.5, True)
 208 model.do()
 209 Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
 210 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_13_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_14_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, model.selection(), 0)
 211 Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")])
 212 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_3_1")], [model.selection("SOLID", "Common_1_1"), model.selection("SOLID", "Common_1_2")])
 213 model.do()
 214 model.testHaveNamingEdges(Cut_1, model, Part_1_doc)
 215 model.end()