src/ModelAPI/Test/TestWeakNaming2375.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 model.addParameter(Part_1_doc, "angle", "27.5")
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  30 SketchLine_1 = Sketch_1.addLine(0, 4, 6.2, 4)
  31 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
  32 SketchLine_2 = SketchProjection_1.createdFeature()
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  34 SketchLine_3 = Sketch_1.addLine(6.2, 4, 6.2, 2.5)
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  36 SketchLine_4 = Sketch_1.addLine(6.2, 2.5, 3.5, 2)
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchLine_5 = Sketch_1.addLine(3.5, 2, 3.5, 0)
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  40 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
  41 SketchLine_6 = SketchProjection_2.createdFeature()
  42 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
  43 SketchLine_7 = Sketch_1.addLine(3.5, 0, 0, 0)
  44 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
  45 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_7.endPoint())
  46 SketchLine_8 = Sketch_1.addLine(0, 4, 0, 0)
  47 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.startPoint())
  48 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_8.endPoint())
  49 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
  50 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
  51 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  52 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 6.2)
  53 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_7.result(), 3.5)
  54 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_5.result(), 2)
  55 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_3.result(), 1.5)
  56 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_8.result(), 4)
  57 model.do()
  58 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_8f-SketchLine_7r-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_1r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
  59 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1"))
  60 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_3][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1]__cc"), False)
  61 SketchPoint_1 = SketchProjection_3.createdFeature()
  62 SketchCircle_1 = Sketch_2.addCircle(0, 0, 4.75)
  63 SketchCircle_1.setAuxiliary(True)
  64 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
  65 SketchCircle_2 = Sketch_2.addCircle(4.113620667976081, 2.375000000000003, 1.1)
  66 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_2.center())
  67 SketchCircle_3 = Sketch_2.addCircle(-4.113620667974014, 2.375000000003604, 1.1)
  68 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_3.center())
  69 SketchCircle_4 = Sketch_2.addCircle(4.163806340121522e-12, -4.75000000000001, 1.1)
  70 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_4.center())
  71 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchCircle_2.results()[1], SketchCircle_3.results()[1])
  72 SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
  73 SketchLine_9 = Sketch_2.addLine(0, 0, 4.113620667976081, 2.375000000000003)
  74 SketchLine_9.setAuxiliary(True)
  75 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.startPoint())
  76 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_9.endPoint())
  77 SketchLine_10 = Sketch_2.addLine(-4.113620667974014, 2.375000000003604, 0, 0)
  78 SketchLine_10.setAuxiliary(True)
  79 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchCircle_3.center(), SketchLine_10.startPoint())
  80 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_10.endPoint())
  81 SketchLine_11 = Sketch_2.addLine(4.163806340121522e-12, -4.75000000000001, 0, 0)
  82 SketchLine_11.setAuxiliary(True)
  83 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchCircle_4.center(), SketchLine_11.startPoint())
  84 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_11.endPoint())
  85 SketchConstraintRadius_1 = Sketch_2.setRadius(SketchCircle_2.results()[1], 1.1)
  86 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1"), False)
  87 SketchLine_12 = SketchProjection_4.createdFeature()
  88 SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_12.result(), 30.00000000000006)
  89 SketchConstraintAngle_2 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_10.result(), 119.9999999999498)
  90 SketchConstraintAngle_3 = Sketch_2.setAngle(SketchLine_10.result(), SketchLine_11.result(), 120.0000000001004)
  91 SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_9.result(), 4.75)
  92 SketchCircle_5 = Sketch_2.addCircle(2.552173139647412, 4.006109367611208, 0.65)
  93 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_5.center())
  94 SketchCircle_6 = Sketch_2.addCircle(2.552173139647412, 4.006109367611208, 0.8)
  95 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_6.center())
  96 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchCircle_6.center())
  97 SketchCircle_7 = Sketch_2.addCircle(4.745479052513824, 0.20719208998535, 0.65)
  98 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_7.center())
  99 SketchCircle_8 = Sketch_2.addCircle(4.745479052513824, 0.20719208998535, 0.8)
 100 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_8.center())
 101 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchCircle_8.center())
 102 SketchLine_13 = Sketch_2.addLine(0, 0, 2.552173139647412, 4.006109367611208)
 103 SketchLine_13.setAuxiliary(True)
 104 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_13.startPoint())
 105 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchLine_13.endPoint())
 106 SketchLine_14 = Sketch_2.addLine(0, 0, 4.745479052513824, 0.20719208998535)
 107 SketchLine_14.setAuxiliary(True)
 108 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_14.startPoint())
 109 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchLine_14.endPoint())
 110 SketchConstraintEqual_3 = Sketch_2.setEqual(SketchCircle_7.results()[1], SketchCircle_5.results()[1])
 111 SketchConstraintEqual_4 = Sketch_2.setEqual(SketchCircle_8.results()[1], SketchCircle_6.results()[1])
 112 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_7.results()[1], 0.65)
 113 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_8.results()[1], 0.8)
 114 SketchCircle_9 = Sketch_2.addCircle(-2.552173139482203, 4.006109367717388, 0.65)
 115 SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_9.center())
 116 SketchCircle_10 = Sketch_2.addCircle(-4.745479052513825, 0.2071920899853395, 0.65)
 117 SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_10.center())
 118 SketchCircle_11 = Sketch_2.addCircle(-2.552173139482203, 4.006109367717388, 0.8)
 119 SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_11.center())
 120 SketchCircle_12 = Sketch_2.addCircle(-4.745479052513825, 0.2071920899853395, 0.8)
 121 SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchCircle_10.center(), SketchCircle_12.center())
 122 SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchCircle_9.center(), SketchCircle_11.center())
 123 SketchConstraintEqual_5 = Sketch_2.setEqual(SketchCircle_6.results()[1], SketchCircle_11.results()[1])
 124 SketchConstraintEqual_6 = Sketch_2.setEqual(SketchCircle_5.results()[1], SketchCircle_9.results()[1])
 125 SketchConstraintEqual_7 = Sketch_2.setEqual(SketchCircle_9.results()[1], SketchCircle_10.results()[1])
 126 SketchConstraintEqual_8 = Sketch_2.setEqual(SketchCircle_11.results()[1], SketchCircle_12.results()[1])
 127 SketchLine_15 = Sketch_2.addLine(-2.552173139482203, 4.006109367717388, 0, 0)
 128 SketchLine_15.setAuxiliary(True)
 129 SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchCircle_9.center(), SketchLine_15.startPoint())
 130 SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_15.endPoint())
 131 SketchLine_16 = Sketch_2.addLine(-4.745479052513825, 0.2071920899853395, 0, 0)
 132 SketchLine_16.setAuxiliary(True)
 133 SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchCircle_10.center(), SketchLine_16.startPoint())
 134 SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_16.endPoint())
 135 SketchCircle_13 = Sketch_2.addCircle(-2.193305912870557, -4.213301457594897, 0.8)
 136 SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_13.center())
 137 SketchCircle_14 = Sketch_2.addCircle(2.193305912973027, -4.213301457541542, 0.8)
 138 SketchConstraintCoincidence_40 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_14.center())
 139 SketchConstraintEqual_9 = Sketch_2.setEqual(SketchCircle_14.results()[1], SketchCircle_13.results()[1])
 140 SketchConstraintEqual_10 = Sketch_2.setEqual(SketchCircle_12.results()[1], SketchCircle_13.results()[1])
 141 SketchLine_17 = Sketch_2.addLine(0, 0, -2.193305912870557, -4.213301457594897)
 142 SketchLine_17.setAuxiliary(True)
 143 SketchConstraintCoincidence_41 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_17.startPoint())
 144 SketchConstraintCoincidence_42 = Sketch_2.setCoincident(SketchCircle_13.center(), SketchLine_17.endPoint())
 145 SketchLine_18 = Sketch_2.addLine(0, 0, 2.193305912973027, -4.213301457541542)
 146 SketchLine_18.setAuxiliary(True)
 147 SketchConstraintCoincidence_43 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_18.startPoint())
 148 SketchConstraintCoincidence_44 = Sketch_2.setCoincident(SketchCircle_14.center(), SketchLine_18.endPoint())
 149 SketchConstraintAngle_4 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_14.result(), "angle")
 150 SketchConstraintAngle_5 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_13.result(), "angle")
 151 SketchConstraintAngle_6 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_15.result(), "angle")
 152 SketchConstraintAngle_7 = Sketch_2.setAngleBackward(SketchLine_16.result(), SketchLine_10.result(), "angle")
 153 SketchConstraintAngle_8 = Sketch_2.setAngle(SketchLine_17.result(), SketchLine_11.result(), "angle")
 154 SketchConstraintAngle_9 = Sketch_2.setAngle(SketchLine_11.result(), SketchLine_18.result(), "angle")
 155 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
 156 SketchLine_19 = SketchProjection_5.createdFeature()
 157 SketchCircle_15 = Sketch_2.addCircle(0, 5, 0.45)
 158 SketchConstraintCoincidence_45 = Sketch_2.setCoincident(SketchLine_19.result(), SketchCircle_15.center())
 159 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_15.results()[1], 0.45)
 160 SketchLine_20 = Sketch_2.addLine(0, 0, 4.385635518227006, -2.793957963403483)
 161 SketchLine_20.setAuxiliary(True)
 162 SketchConstraintCoincidence_46 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_20.startPoint())
 163 SketchCircle_16 = Sketch_2.addCircle(3.373565783251674, -2.149198433387089, 0.3)
 164 SketchConstraintCoincidence_47 = Sketch_2.setCoincident(SketchLine_20.result(), SketchCircle_16.center())
 165 SketchCircle_17 = Sketch_2.addCircle(4.385635518227006, -2.793957963403483, 0.5)
 166 SketchConstraintCoincidence_48 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchCircle_17.center())
 167 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_16.results()[1], 0.3)
 168 SketchConstraintRadius_6 = Sketch_2.setRadius(SketchCircle_17.results()[1], 0.5)
 169 SketchConstraintAngle_10 = Sketch_2.setAngleBackward(SketchLine_14.result(), SketchLine_20.result(), 35.00000000000006)
 170 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchCircle_15.center(), SketchLine_12.result(), 5, True)
 171 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_16.center(), SketchAPI_Line(SketchLine_19).startPoint(), 4, True)
 172 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_19).startPoint(), SketchCircle_17.center(), 5.2, True)
 173 model.do()
 174 ExtrusionCut_1_objects_1 = [model.selection("FACE", "Sketch_2/Face-SketchCircle_9_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_17_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_16_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")]
 175 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 176 ExtrusionCut_2_objects_1 = [model.selection("WIRE", "Sketch_2/Face-SketchCircle_11_2f-SketchCircle_9_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_12_2f-SketchCircle_10_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_6_2f-SketchCircle_5_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_8_2f-SketchCircle_7_2r_wire")]
 177 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_1_1")])
 178 Axis_4 = model.addAxis(Part_1_doc, 0, -1, -10)
 179 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_15_2f")], model.selection("EDGE", "Axis_1"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 180 ExtrusionCut_3.result().setDeflection(1e-05)
 181 Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
 182 SketchLine_21 = Sketch_3.addLine(3.5, 2.508501119175777, 3.5, 4.934853156880259)
 183 SketchLine_22 = Sketch_3.addLine(3.5, 4.934853156880259, 6.2, 4.934853156880259)
 184 SketchConstraintCoincidence_49 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
 185 SketchLine_23 = Sketch_3.addLine(6.2, 4.934853156880259, 6.2, 3.008501119175777)
 186 SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
 187 SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_3"), False)
 188 SketchLine_24 = SketchProjection_6.createdFeature()
 189 SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_24.result())
 190 SketchLine_25 = Sketch_3.addLine(6.2, 3.008501119175777, 3.5, 2.508501119175777)
 191 SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_25.startPoint())
 192 SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_25.endPoint())
 193 SketchProjection_7 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_5"), False)
 194 SketchLine_26 = SketchProjection_7.createdFeature()
 195 SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_26.result())
 196 SketchConstraintCoincidence_55 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_26.result())
 197 SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_22.result())
 198 SketchConstraintCoincidence_56 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_24.result())
 199 SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_4"), False)
 200 SketchLine_27 = SketchProjection_8.createdFeature()
 201 SketchConstraintParallel_1 = Sketch_3.setParallel(SketchLine_25.result(), SketchLine_27.result())
 202 SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_4"), False)
 203 SketchLine_28 = SketchProjection_9.createdFeature()
 204 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_21.startPoint(), SketchLine_28.result(), 0.5, True)
 205 model.do()
 206 Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
 207 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_13_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_14_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, model.selection(), 0)
 208 Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")])
 209 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_3_1")], [model.selection("SOLID", "Common_1_1"), model.selection("SOLID", "Common_1_2")])
 210 model.do()
 211 model.testHaveNamingEdges(Cut_1, model, Part_1_doc)
 212 model.end()