src/ModelAPI/Test/TestWeakNaming2291.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 # -*- coding: utf-8 -*-
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  30 SketchLine_1 = Sketch_1.addLine(36.44136828644502, 18.79607416879796, -16.36664961636829, 18.79607416879796)
  31 SketchLine_2 = Sketch_1.addLine(-16.36664961636829, 18.79607416879796, -16.36664961636829, -16.62237851662404)
  32 SketchLine_3 = Sketch_1.addLine(-16.36664961636829, -16.62237851662404, 36.44136828644502, -16.62237851662404)
  33 SketchLine_4 = Sketch_1.addLine(36.44136828644502, -16.62237851662404, 36.44136828644502, 18.79607416879796)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  39 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  40 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  41 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  42 model.do()
  43 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 10, 0)
  44 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f"))
  45 SketchLine_5 = Sketch_2.addLine(-3.660618520812283, -7.666051414039341, -9.927240775274454, -7.666051414039341)
  46 SketchLine_6 = Sketch_2.addLine(-9.927240775274454, -7.666051414039341, -9.927240775274454, 7.885614342469023)
  47 SketchLine_7 = Sketch_2.addLine(-9.927240775274454, 7.885614342469023, -3.660618520812283, 7.885614342469023)
  48 SketchLine_8 = Sketch_2.addLine(-3.660618520812283, 7.885614342469023, -3.660618520812283, -7.666051414039341)
  49 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  50 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  51 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  52 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  53 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  54 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  55 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  56 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  57 model.do()
  58 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_5r-SketchLine_6r-SketchLine_7r-SketchLine_8r")], model.selection(), 10, 0)
  59 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
  60 model.do()
  61 model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
  62 model.end()