src/ModelAPI/Test/TestWeakNaming2248.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(162.2066367177775, 151.0353807454788, -151.0353807454788, 151.0353807454788)
  28 SketchLine_2 = Sketch_1.addLine(-151.0353807454788, 151.0353807454788, -151.0353807454788, -54.96257938370976)
  29 SketchLine_3 = Sketch_1.addLine(-151.0353807454788, -54.96257938370976, 162.2066367177775, -54.96257938370976)
  30 SketchLine_4 = Sketch_1.addLine(162.2066367177775, -54.96257938370976, 162.2066367177775, 151.0353807454788)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  33 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  36 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  37 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  38 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  39 SketchArc_1 = Sketch_1.addArc(-6.962011033302339, 151.0353807454788, -151.0353807454788, 151.0353807454788, 38.42912054470763, 14.29920764454234, False)
  40 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_1.startPoint())
  41 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_2.result(), SketchArc_1.results()[1])
  42 SketchArc_2 = Sketch_1.addArc(162.2066367177775, 234.3997613131608, 162.2066367177775, -54.96257938370976, -46.91927508365465, 34.40746839468006, True)
  43 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_2.startPoint())
  44 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_2.results()[1])
  45 SketchCircle_1 = Sketch_1.addCircle(-8.043304300055087, 108.5846080507436, 59.51166177475501)
  46 model.do()
  47 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
  48 model.do()
  49 model.testHaveNamingSubshapes(Extrusion_1, model, Part_1_doc)
  50 model.end()