src/ModelAPI/Test/TestWeakNaming2125.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  27 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  28 SketchCircle_1 = Sketch_1.addCircle(0, 0, 207.1440202435477)
  29 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
  30 SketchCircle_2 = Sketch_1.addCircle(0, 0, 103.3027146966417)
  31 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchCircle_2.center())
  32 model.do()
  33 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f-SketchCircle_2_2r")], model.selection(), 410, 0)
  34 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
  35 SketchCircle_3 = Sketch_2.addCircle(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_2_2][Extrusion_1_1/To_Face]"))
  36 SketchCircle_4 = Sketch_2.addCircle(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]"))
  37 SketchArc_1 = Sketch_2.addArc(-76.31943784014528, 69.61892179185162, 22.73963059863011, 100.7688447087372, -98.26117835861398, -31.87776170424145, False)
  38 SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchCircle_3.results()[1], SketchArc_1.startPoint())
  39 SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchCircle_3.results()[1], SketchArc_1.endPoint())
  40 SketchConstraintTangent_1 = Sketch_2.setTangent(SketchCircle_4.results()[1], SketchArc_1.results()[1])
  41 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchArc_1.center(), SketchCircle_3.results()[1])
  42 SketchArc_2 = Sketch_2.addArc(0, 0, 22.73963059863011, 100.7688447087372, -98.26117835861152, -31.87776170424295, False)
  43 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchCircle_3.result(), SketchArc_2.center())
  44 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchArc_2.startPoint())
  45 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchArc_1.results()[1], SketchArc_2.endPoint())
  46 model.do()
  47 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_1_2f-SketchArc_2_2r")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f-SketchCircle_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
  48 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face"))
  49 SketchLine_1 = Sketch_3.addLine(72.49453964599654, -117.643151959956, 76.08424302289386, 111.5797586569786)
  50 SketchArc_3 = Sketch_3.addArc(23.82028040531734, -147.9761102212422, 72.49453964599654, -117.643151959956, 29.20403695178628, -205.0750334594096, False)
  51 SketchConstraintCoincidence_9 = Sketch_3.setCoincident(SketchLine_1.startPoint(), SketchArc_3.startPoint())
  52 SketchProjection_1 = Sketch_3.addProjection(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchCircle_1_2&weak_name_2]"), False)
  53 SketchArc_4 = SketchProjection_1.createdFeature()
  54 SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchArc_4.results()[1])
  55 model.do()
  56 model.do()
  57 model.end()
  58
  59 from ModelAPI import *
  60 aFactory = ModelAPI_Session.get().validators()
  61 assert(aFactory.validate(Sketch_3.feature()))