src/ModelAPI/Test/TestSelectionScope.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from GeomAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 lenParam = model.addParameter(Part_1_doc, "len", "50")
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  30 SketchLine_1 = Sketch_1.addLine(33.62835038363171, 25.06143222506393, -25.8286189258312, 25.06143222506393)
  31 SketchLine_2 = Sketch_1.addLine(-25.8286189258312, 25.06143222506393, -25.8286189258312, -21.22549872122762)
  32 SketchLine_3 = Sketch_1.addLine(-25.8286189258312, -21.22549872122762, 33.62835038363171, -21.22549872122762)
  33 SketchLine_4 = Sketch_1.addLine(33.62835038363171, -21.22549872122762, 33.62835038363171, 25.06143222506393)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  39 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  40 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  41 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  42 model.do()
  43 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 10, 0)
  44 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), 5, 5, [model.selection("SOLID", "Extrusion_1_1")])
  45 Sketch_2_origin = GeomAPI_Pnt(0, -10, 0)
  46 Sketch_2_norm = GeomAPI_Dir(0, -1, 0)
  47 Sketch_2_dirx = GeomAPI_Dir(1, 0, 0)
  48 Sketch_2 = model.addSketch(Part_1_doc, GeomAPI_Ax3(Sketch_2_origin, Sketch_2_dirx, Sketch_2_norm))
  49 SketchLine_5 = Sketch_2.addLine(8.950511508951408, 45.06143222506392, -10.86847826086957, 45.06143222506392)
  50 SketchLine_6 = Sketch_2.addLine(-10.86847826086957, 45.06143222506392, -10.86847826086957, -4.938567774936073)
  51 SketchLine_7 = Sketch_2.addLine(-10.86847826086957, -4.938567774936073, 8.950511508951408, -4.938567774936073)
  52 SketchLine_8 = Sketch_2.addLine(8.950511508951408, -4.938567774936073, 8.950511508951408, 45.06143222506392)
  53 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  54 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  55 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  56 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  57 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  58 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  59 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  60 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  61 SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_8.result(), "len")
  62 SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]"), False)
  63 SketchLine_9 = SketchProjection_1.createdFeature()
  64 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchLine_5.startPoint(), SketchLine_9.result(), 20, True)
  65 ExtrusionCut_1.setNestedSketch(Sketch_2)
  66 Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4]"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
  67 Cylinder_2 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face]"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
  68 model.do()
  69 # make sketch_2 cut the whole top face of the initial extrusion, so, one of the cylinder becomes invalid
  70 lenParam.setValue(100)
  71 model.do()
  72 # update selection of cylinder base points
  73 model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2)(ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchLine_6)(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3)]").fillAttribute(Cylinder_1.basePoint())
  74 model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face&weak_name_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4]").fillAttribute(Cylinder_2.basePoint())
  75 model.end()
  76
  77 # check that both cylinders are valid and have correct results
  78 assert(Cylinder_1.feature().results().size() == 1)
  79 assert(Cylinder_2.feature().results().size() == 1)