src/ModelAPI/Test/TestGeomNamingSketchPlane.py

   1 # Copyright (C) 2014-2024  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 lenParam = model.addParameter(Part_1_doc, "len", "500")
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(-302.4220649391276, 58.25973730731688, -52.42206493912754, 58.25973730731688)
  29 SketchLine_2 = Sketch_1.addLine(-52.42206493912754, 58.25973730731688, -52.42206493912754, -61.38418346467283)
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  31 SketchLine_3 = Sketch_1.addLine(-52.42206493912754, -61.38418346467283, 147.5779350608725, -61.38418346467283)
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  33 SketchLine_4 = Sketch_1.addLine(147.5779350608725, -61.38418346467283, 147.5779350608725, 58.25973730731685)
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchLine_5 = Sketch_1.addLine(147.5779350608725, 58.25973730731685, 297.5779350608724, 58.25973730731685)
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  37 SketchLine_6 = Sketch_1.addLine(297.5779350608724, 58.25973730731685, 297.5779350608724, -192.2459441196271)
  38 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  39 SketchLine_7 = Sketch_1.addLine(297.5779350608724, -192.2459441196271, -302.4220649391276, -192.2459441196271)
  40 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  41 SketchLine_8 = Sketch_1.addLine(-302.4220649391276, -192.2459441196271, -302.4220649391276, 58.25973730731688)
  42 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  43 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.endPoint())
  44 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_7.result())
  45 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  46 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_8.result())
  47 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_2.result())
  48 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_4.result())
  49 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_6.result())
  50 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), 600)
  51 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_1.result())
  52 SketchConstraintCollinear_1 = Sketch_1.setCollinear(SketchLine_5.result(), SketchLine_1.result())
  53 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 250)
  54 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_3.result(), 200)
  55 model.do()
  56 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_8r-SketchLine_7r-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 600, 0)
  57 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"))
  58 SketchLine_9 = Sketch_2.addLine(236.9930310780426, -200, -144.601680073095, -200)
  59 SketchLine_10 = Sketch_2.addLine(-144.601680073095, -200, -144.601680073095, -500)
  60 SketchLine_11 = Sketch_2.addLine(-144.601680073095, -500, 236.9930310780426, -500)
  61 SketchLine_12 = Sketch_2.addLine(236.9930310780426, -500, 236.9930310780426, -200)
  62 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
  63 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  64 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  65 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  66 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_9.result())
  67 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_10.result())
  68 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_11.result())
  69 SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
  70 SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1"), False)
  71 SketchLine_13 = SketchProjection_1.createdFeature()
  72 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchLine_13.result(), SketchLine_9.endPoint(), 200, True)
  73 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_10.endPoint(), SketchLine_13.result(), "len", True)
  74 model.do()
  75 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_9r-SketchLine_10f-SketchLine_11f-SketchLine_12f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7"), 0, [model.selection("SOLID", "Extrusion_1_1")])
  76 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3&weak_name_1"))
  77 SketchCircle_1 = Sketch_3.addCircle(27.57793506087247, -80, 42.03963933117138)
  78 SketchProjection_2 = Sketch_3.addProjection(model.selection("EDGE", "[Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3&weak_name_1]"), False)
  79 SketchProjection_2.setName("SketchProjection_3")
  80 SketchProjection_2.result().setName("SketchProjection_3")
  81 SketchLine_14 = SketchProjection_2.createdFeature()
  82 SketchLine_14.setName("SketchLine_15")
  83 SketchLine_14.result().setName("SketchLine_15")
  84 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_14.result(), SketchCircle_1.center(), 80, True)
  85 SketchConstraintDistance_4.setName("SketchConstraintDistance_4")
  86 SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "[(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/From_Face)(ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchLine_9)][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3&weak_name_1]"), False)
  87 SketchProjection_3.setName("SketchProjection_4")
  88 SketchProjection_3.result().setName("SketchProjection_4")
  89 SketchLine_15 = SketchProjection_3.createdFeature()
  90 SketchLine_15.setName("SketchLine_16")
  91 SketchLine_15.result().setName("SketchLine_16")
  92 SketchConstraintDistance_3 = Sketch_3.setDistance(SketchLine_15.result(), SketchCircle_1.center(), 80, True)
  93 SketchConstraintDistance_3.setName("SketchConstraintDistance_3")
  94 model.do()
  95 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchCircle_1_2r_wire")], model.selection(), model.selection(), 0, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_7"), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
  96 model.do()
  97 # update the sketch 2 to make split of a size of a box
  98 lenParam.setValue(700)
  99 model.end()
 100
 101 # check that sketch_3 and extrusion are updated well
 102 from ModelAPI import *
 103 aFactory = ModelAPI_Session.get().validators()
 104 assert(aFactory.validate(ExtrusionCut_2.feature()))