src/ModelAPI/Test/TestGeomNamingRevolution.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 param = model.addParameter(Part_1_doc, "p", "10")
  29 Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
  30 Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Box_1_1/Top"))
  31 SketchLine_1 = Sketch_1.addLine(6.82842712474619, 7.171572875253809, 2.82842712474619, 7.171572875253809)
  32 SketchLine_2 = Sketch_1.addLine(2.82842712474619, 7.171572875253809, 2.82842712474619, 3.171572875253809)
  33 SketchLine_3 = Sketch_1.addLine(2.82842712474619, 3.171572875253809, 6.82842712474619, 3.171572875253809)
  34 SketchLine_4 = Sketch_1.addLine(6.82842712474619, 3.171572875253809, 6.82842712474619, 7.171572875253809)
  35 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  38 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  40 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  41 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  42 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  43 SketchCircle_1 = Sketch_1.addCircle(4.440892098500626e-16, 0, 1)
  44 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 4)
  45 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_4.result(), 4)
  46 SketchLine_5 = Sketch_1.addLine(0, 10, 10, 0)
  47 SketchLine_5.setAuxiliary(True)
  48 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Right][Box_1_1/Top]"), False)
  49 SketchPoint_1 = SketchProjection_1.createdFeature()
  50 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchPoint_1.result())
  51 SketchProjection_2 = Sketch_1.addProjection(model.selection("VERTEX", "[Box_1_1/Front][Box_1_1/Left][Box_1_1/Top]"), False)
  52 SketchPoint_2 = SketchProjection_2.createdFeature()
  53 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchPoint_2.result())
  54 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.result(), SketchLine_2.startPoint())
  55 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_5.startPoint(), 4, True)
  56 SketchProjection_3 = Sketch_1.addProjection(model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Top]"), False)
  57 SketchLine_6 = SketchProjection_3.createdFeature()
  58 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.result(), SketchCircle_1.center())
  59 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 1)
  60 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_6).endPoint(), SketchCircle_1.center(), "p", True)
  61 model.do()
  62 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection(), 1, 1)
  63 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("SOLID", "Extrusion_1_1")])
  64 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f_wire")], model.selection("EDGE", "[Cut_1_1/Modified_Face&Box_1_1/Left][Cut_1_1/Modified_Face&Box_1_1/Top]"), 45, 0)
  65 model.do()
  66 # relocate circle to split the edge - axis of revolution
  67 param.setValue(5)
  68 model.end()
  69
  70 # check that revolution is valid
  71 from ModelAPI import *
  72 aFactory = ModelAPI_Session.get().validators()
  73 assert(aFactory.validate(Revolution_1.feature()))
  74
  75 assert(model.checkPythonDump(model.ModelHighAPI.CHECK_NAMING))