src/ModelAPI/Test/TestGeomNamingPlacement.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 param = model.addParameter(Part_1_doc, "p", "60")
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  30 SketchLine_1 = Sketch_1.addLine(30, 30, -20, 30)
  31 SketchLine_2 = Sketch_1.addLine(-20, 30, -20, -20)
  32 SketchLine_3 = Sketch_1.addLine(-20, -20, 30, -20)
  33 SketchLine_4 = Sketch_1.addLine(30, -20, 30, 30)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  39 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  40 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  41 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  42 SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchLine_1.startPoint(), SketchLine_2.startPoint(), 50)
  43 SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchLine_4.endPoint(), SketchLine_3.endPoint(), 50)
  44 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  45 SketchPoint_1 = SketchProjection_1.createdFeature()
  46 SketchConstraintDistanceHorizontal_2 = Sketch_1.setHorizontalDistance(SketchLine_2.startPoint(), SketchAPI_Point(SketchPoint_1).coordinates(), 20)
  47 SketchConstraintDistanceVertical_2 = Sketch_1.setVerticalDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_3.endPoint(), 20)
  48 model.do()
  49 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 10, 0)
  50 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
  51 SketchLine_5 = Sketch_2.addLine(19.58333333333334, 17.27351642784226, -0.4166666666666646, 17.27351642784226)
  52 SketchLine_6 = Sketch_2.addLine(-0.4166666666666646, 17.27351642784226, -0.4166666666794808, -42.72648357216971)
  53 SketchLine_7 = Sketch_2.addLine(-0.4166666666794808, -42.72648357216971, 19.58333333332052, -42.72648357216971)
  54 SketchLine_8 = Sketch_2.addLine(19.58333333332052, -42.72648357216971, 19.58333333333334, 17.27351642784226)
  55 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  56 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  57 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  58 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  59 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  60 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  61 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  62 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  63 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"), False)
  64 SketchPoint_2 = SketchProjection_2.createdFeature()
  65 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_7.startPoint(), 30, True)
  66 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/To_Face]"), False)
  67 SketchPoint_3 = SketchProjection_3.createdFeature()
  68 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_7.endPoint(), 25, True)
  69 SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_7.result(), 20)
  70 SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_8.result(), "p")
  71 model.do()
  72 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_5r-SketchLine_6f-SketchLine_7f-SketchLine_8f")], model.selection(), -5, -2)
  73 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
  74 Box_1 = model.addBox(Part_1_doc, 50, 50, 30)
  75 Placement_1 = model.addPlacement(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Cut_1_1/Modified_Face&Extrusion_1_1/To_Face"), False, True)
  76 model.do()
  77 # change parameter to split extrusion top face to two
  78 param.setValue(100)
  79 model.end()
  80
  81 # check that placement is valid
  82 from ModelAPI import *
  83 aFactory = ModelAPI_Session.get().validators()
  84 assert(aFactory.validate(Placement_1.feature()))
  85
  86 assert(model.checkPythonDump(model.ModelHighAPI.CHECK_NAMING))