src/ModelAPI/Test/TestGeomNamingPlacement.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 # -*- coding: utf-8 -*-
  22
  23 from SketchAPI import *
  24
  25 from salome.shaper import model
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31 param = model.addParameter(Part_1_doc, "p", "60")
  32 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  33 SketchLine_1 = Sketch_1.addLine(30, 30, -20, 30)
  34 SketchLine_2 = Sketch_1.addLine(-20, 30, -20, -20)
  35 SketchLine_3 = Sketch_1.addLine(-20, -20, 30, -20)
  36 SketchLine_4 = Sketch_1.addLine(30, -20, 30, 30)
  37 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  38 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  39 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  40 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  41 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  42 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  43 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  44 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  45 SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchLine_1.startPoint(), SketchLine_2.startPoint(), 50)
  46 SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchLine_4.endPoint(), SketchLine_3.endPoint(), 50)
  47 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  48 SketchPoint_1 = SketchProjection_1.createdFeature()
  49 SketchConstraintDistanceHorizontal_2 = Sketch_1.setHorizontalDistance(SketchLine_2.startPoint(), SketchAPI_Point(SketchPoint_1).coordinates(), 20)
  50 SketchConstraintDistanceVertical_2 = Sketch_1.setVerticalDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_3.endPoint(), 20)
  51 model.do()
  52 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 10, 0)
  53 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
  54 SketchLine_5 = Sketch_2.addLine(19.58333333333334, 17.27351642784226, -0.4166666666666646, 17.27351642784226)
  55 SketchLine_6 = Sketch_2.addLine(-0.4166666666666646, 17.27351642784226, -0.4166666666794808, -42.72648357216971)
  56 SketchLine_7 = Sketch_2.addLine(-0.4166666666794808, -42.72648357216971, 19.58333333332052, -42.72648357216971)
  57 SketchLine_8 = Sketch_2.addLine(19.58333333332052, -42.72648357216971, 19.58333333333334, 17.27351642784226)
  58 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  59 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  60 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  61 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  62 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  63 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  64 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  65 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  66 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"), False)
  67 SketchPoint_2 = SketchProjection_2.createdFeature()
  68 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_7.startPoint(), 30, True)
  69 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/To_Face]"), False)
  70 SketchPoint_3 = SketchProjection_3.createdFeature()
  71 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_7.endPoint(), 25, True)
  72 SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_7.result(), 20)
  73 SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_8.result(), "p")
  74 model.do()
  75 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_5r-SketchLine_6f-SketchLine_7f-SketchLine_8f")], model.selection(), -5, -2)
  76 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
  77 Box_1 = model.addBox(Part_1_doc, 50, 50, 30)
  78 Placement_1 = model.addPlacement(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Cut_1_1/Modified_Face&Extrusion_1_1/To_Face"), False, True)
  79 model.do()
  80 # change parameter to split extrusion top face to two
  81 param.setValue(100)
  82 model.end()
  83
  84 # check that placement is valid
  85 from ModelAPI import *
  86 aFactory = ModelAPI_Session.get().validators()
  87 assert(aFactory.validate(Placement_1.feature()))
  88
  89 assert(model.checkPythonDump(model.ModelHighAPI.CHECK_NAMING))