src/ModelAPI/Test/TestGeomNamingBoxWithFillet.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 param_p = model.addParameter(Part_1_doc, "p", "5")
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  30 SketchLine_1 = Sketch_1.addLine(0, 0, 0, 30.0000000000845)
  31 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  32 SketchPoint_1 = SketchProjection_1.createdFeature()
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.result())
  34 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  35 SketchLine_2 = SketchProjection_2.createdFeature()
  36 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
  37 SketchLine_3 = Sketch_1.addLine(0, 30.0000000000845, 30.00000000002328, 30.00000000002326)
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  39 SketchLine_4 = Sketch_1.addLine(30.00000000002328, 30.00000000002326, 29.99999999996195, 0)
  40 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  41 SketchProjection_3 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
  42 SketchLine_5 = SketchProjection_3.createdFeature()
  43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.result())
  44 SketchLine_6 = Sketch_1.addLine(29.99999999996195, 0, 0, 0)
  45 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
  46 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_6.endPoint())
  47 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_3.result(), 30)
  48 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_4.result(), 30)
  49 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_4.result(), SketchLine_3.result())
  50 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_4.result(), SketchLine_1.result())
  51 model.do()
  52 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_4r-SketchLine_3r-SketchLine_1r")], model.selection(), 30, 0)
  53 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_4r-SketchLine_3r-SketchLine_1r"))
  54 SketchLine_7 = Sketch_2.addLine(20, 7, 10, 7)
  55 SketchLine_8 = Sketch_2.addLine(10, 7, 10, 0)
  56 SketchLine_9 = Sketch_2.addLine(10, 0, 20, 0)
  57 SketchLine_10 = Sketch_2.addLine(20, 0, 20, 7)
  58 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_7.startPoint())
  59 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  60 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  61 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  62 SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_7.result())
  63 SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_8.result())
  64 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_9.result())
  65 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_10.result())
  66 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_6"), False)
  67 SketchLine_11 = SketchProjection_4.createdFeature()
  68 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_11.result())
  69 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_11).endPoint(), SketchLine_8.endPoint(), 10, True)
  70 SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_9.result(), 10)
  71 SketchConstraintLength_4 = Sketch_2.setLength(SketchLine_8.result(), 7)
  72 model.do()
  73 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_7r-SketchLine_8f-SketchLine_9f-SketchLine_10f_wire")], model.selection(), "p", 0, [model.selection("SOLID", "Extrusion_1_1")])
  74 Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]")], 3)
  75 model.do()
  76 # increase the extrusion-cut heigh to make face of a box divided into two
  77 param_p.setValue(30);
  78 from ModelAPI import *
  79 aFactory = ModelAPI_Session.get().validators()
  80 assert(aFactory.validate(Fillet_1.feature()))
  81 model.end()
  82
  83 assert(model.checkPythonDump())