src/ModelAPI/Test/TestFolder_Sketch.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 """
  21     Test checks adding sketch into a folder
  22 """
  23
  24 from ModelAPI import *
  25 from salome.shaper import model
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31
  32 Sketch_0 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  33 SketchLine_1 = Sketch_0.addLine(10, -10, 10, 10)
  34 model.do()
  35
  36 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  37 SketchCircle_1 = Sketch_1.addCircle(50, 50, 25)
  38 model.do()
  39 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2r")], model.selection(), 50, 0)
  40
  41 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  42 SketchCircle_2 = Sketch_2.addCircle(100, -100, 50)
  43 model.do()
  44 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 10, 0)
  45 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_2_1")])
  46 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_1"))
  47 SketchProjection_1 = Sketch_3.addProjection(model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_3/SketchCircle_2_2][Extrusion_2_1/To_Face]__cc"), False)
  48 SketchPoint_1 = SketchProjection_1.createdFeature()
  49 SketchCircle_3 = Sketch_3.addCircle(100, -100, 25)
  50 SketchConstraintCoincidence_1 = Sketch_3.setCoincident(SketchPoint_1.result(), SketchCircle_3.center())
  51 ExtrusionCut_1.setNestedSketch(Sketch_3)
  52 model.do()
  53 model.end()
  54
  55
  56 aSession = ModelAPI_Session.get()
  57 aPartDoc = aSession.activeDocument()
  58
  59 #=========================================================================
  60 # Test 1. Sketch and extrusion could be added to the folder above
  61 #=========================================================================
  62 aSession.startOperation()
  63 Folder_1 = aPartDoc.addFolder(Sketch_1.feature())
  64 aSession.finishOperation()
  65
  66 NB_FEATURES_FULL = 7
  67 NB_FEATURES_OUT  = 7
  68 # full number of features
  69 assert(aPartDoc.size("Features") == NB_FEATURES_FULL), "Wrong number of features: {}, expected: {}".format(aPartDoc.size("Features"), NB_FEATURES_FULL)
  70 # number of features outside the folder
  71 assert(aPartDoc.size("Features", True) == NB_FEATURES_OUT), "Wrong number of features outside a folder: {}, expected: {}".format(aPartDoc.size("Features", True), NB_FEATURES_OUT)
  72
  73 toFolder = FeatureList()
  74 toFolder.append(Sketch_1.feature())
  75 toFolder.append(Extrusion_1.feature())
  76
  77 # move features to the folder
  78 aSession.startOperation()
  79 aFolder = aPartDoc.findFolderAbove(toFolder)
  80 assert(aFolder is not None and aFolder.data().isEqual(Folder_1.data()))
  81 isAdded = aPartDoc.moveToFolder(toFolder, aFolder)
  82 aSession.finishOperation()
  83 assert(isAdded)
  84 NB_FEATURES_OUT -= 2
  85 # full number of features
  86 assert(aPartDoc.size("Features") == NB_FEATURES_FULL), "Wrong number of features: {}, expected: {}".format(aPartDoc.size("Features"), NB_FEATURES_FULL)
  87 # number of features outside the folder
  88 assert(aPartDoc.size("Features", True) == NB_FEATURES_OUT), "Wrong number of features outside a folder: {}, expected: {}".format(aPartDoc.size("Features", True), NB_FEATURES_OUT)
  89
  90 # check the index of the sketch in the folder
  91 aFound = aPartDoc.findContainingFolder(Sketch_1.feature())
  92 assert(aFound[0].data().isEqual(aFolder.data()))
  93 assert(aFound[1] == 0)
  94 # check the index of the extrusion in the folder
  95 aFound = aPartDoc.findContainingFolder(Extrusion_1.feature())
  96 assert(aFound[0].data().isEqual(aFolder.data()))
  97 assert(aFound[1] == 1)
  98
  99
 100 #=========================================================================
 101 # Test 2. Sketch could be added to the folder below
 102 #=========================================================================
 103 aSession.startOperation()
 104 Folder_2 = aPartDoc.addFolder(Extrusion_2.feature())
 105 aSession.finishOperation()
 106
 107 NB_FEATURES_FULL += 1
 108 NB_FEATURES_OUT  += 1
 109 # full number of features
 110 assert(aPartDoc.size("Features") == NB_FEATURES_FULL), "Wrong number of features: {}, expected: {}".format(aPartDoc.size("Features"), NB_FEATURES_FULL)
 111 # number of features outside the folder
 112 assert(aPartDoc.size("Features", True) == NB_FEATURES_OUT), "Wrong number of features outside a folder: {}, expected: {}".format(aPartDoc.size("Features", True), NB_FEATURES_OUT)
 113
 114 toFolder = FeatureList()
 115 toFolder.append(Sketch_2.feature())
 116
 117 # move feature to the folder
 118 aSession.startOperation()
 119 aFolder = aPartDoc.findFolderBelow(toFolder)
 120 assert(aFolder is not None and aFolder.data().isEqual(Folder_2.data()))
 121 isAdded = aPartDoc.moveToFolder(toFolder, aFolder)
 122 aSession.finishOperation()
 123 assert(isAdded)
 124 NB_FEATURES_OUT -= 1
 125 # full number of features
 126 assert(aPartDoc.size("Features") == NB_FEATURES_FULL), "Wrong number of features: {}, expected: {}".format(aPartDoc.size("Features"), NB_FEATURES_FULL)
 127 # number of features outside the folder
 128 assert(aPartDoc.size("Features", True) == NB_FEATURES_OUT), "Wrong number of features outside a folder: {}, expected: {}".format(aPartDoc.size("Features", True), NB_FEATURES_OUT)
 129
 130 # check the index of the sketch in the folder
 131 aFound = aPartDoc.findContainingFolder(Sketch_2.feature())
 132 assert(aFound[0].data().isEqual(aFolder.data()))
 133 assert(aFound[1] == 0)
 134
 135 # check sketch is the last feature in the folder
 136 aLastFeature = Folder_2.lastVisibleFeature()
 137 assert(aLastFeature.getKind() == "Sketch")
 138
 139
 140 #=========================================================================
 141 # Test 3. Sketch could be removed from the folder
 142 #=========================================================================
 143 fromFolder = FeatureList()
 144 fromFolder.append(Sketch_1.feature())
 145
 146 aSession.startOperation()
 147 isMovedOut = aPartDoc.removeFromFolder(fromFolder)
 148 aSession.finishOperation()
 149 assert(isMovedOut)
 150 assert(aPartDoc.index(Sketch_1.feature(), True) == 1), "Wrong index of the {}: {}".format(Sketch_1.feature().name(), aPartDoc.index(Sketch_1.feature(), True))
 151 NB_FEATURES_OUT += 1
 152 # full number of features
 153 assert(aPartDoc.size("Features") == NB_FEATURES_FULL), "Wrong number of features: {}, expected: {}".format(aPartDoc.size("Features"), NB_FEATURES_FULL)
 154 # number of features outside the folder
 155 assert(aPartDoc.size("Features", True) == NB_FEATURES_OUT), "Wrong number of features outside a folder: {}, expected: {}".format(aPartDoc.size("Features", True), NB_FEATURES_OUT)
 156
 157
 158 #=========================================================================
 159 # Test 4. Add 2 sketches to the folder below
 160 #=========================================================================
 161
 162 toFolder = FeatureList()
 163 toFolder.append(Sketch_0.feature())
 164 toFolder.append(Sketch_1.feature())
 165
 166 # move features to the folder
 167 aSession.startOperation()
 168 aFolder = aPartDoc.findFolderBelow(toFolder)
 169 assert(aFolder is not None and aFolder.data().isEqual(Folder_1.data()))
 170 isAdded = aPartDoc.moveToFolder(toFolder, aFolder)
 171 aSession.finishOperation()
 172 assert(isAdded)
 173 NB_FEATURES_OUT -= 2
 174 # full number of features
 175 assert(aPartDoc.size("Features") == NB_FEATURES_FULL), "Wrong number of features: {}, expected: {}".format(aPartDoc.size("Features"), NB_FEATURES_FULL)
 176 # number of features outside the folder
 177 assert(aPartDoc.size("Features", True) == NB_FEATURES_OUT), "Wrong number of features outside a folder: {}, expected: {}".format(aPartDoc.size("Features", True), NB_FEATURES_OUT)
 178
 179 # check the index of the sketch in the folder
 180 aFound = aPartDoc.findContainingFolder(Sketch_0.feature())
 181 assert(aFound[0].data().isEqual(aFolder.data()))
 182 assert(aFound[1] == 0)
 183 # check the index of the extrusion in the folder
 184 aFound = aPartDoc.findContainingFolder(Sketch_1.feature())
 185 assert(aFound[0].data().isEqual(aFolder.data()))
 186 assert(aFound[1] == 1)
 187
 188
 189 from salome.shaper import model
 190 assert(model.checkPythonDump())