src/ModelAPI/Test/Test2859.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21 from ModelAPI import *
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 model.addParameter(Part_1_doc, "h1", "15")
  29 param_h2 = model.addParameter(Part_1_doc, "h2", "70")
  30 model.addParameter(Part_1_doc, "h3", "7")
  31 model.addParameter(Part_1_doc, "d", "15")
  32 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  33 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  34 SketchPoint_1 = SketchProjection_1.createdFeature()
  35 SketchLine_1 = Sketch_1.addLine(-7.500000000000083, -15.81138830084192, -7.500000000000083, -26.99999999999995)
  36 SketchLine_1.setName("SketchLine_2")
  37 SketchLine_1.result().setName("SketchLine_2")
  38 SketchLine_2 = Sketch_1.addLine(-4.499999999999853, -30, 4.499999999999912, -30)
  39 SketchLine_2.setName("SketchLine_3")
  40 SketchLine_2.result().setName("SketchLine_3")
  41 SketchLine_3 = Sketch_1.addLine(7.499999999999912, -27, 7.499999999999912, -15.81138830084196)
  42 SketchLine_3.setName("SketchLine_4")
  43 SketchLine_3.result().setName("SketchLine_4")
  44 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  45 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
  46 SketchConstraintHorizontal_1.setName("SketchConstraintHorizontal_2")
  47 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
  48 SketchPoint_2 = Sketch_1.addPoint(0, -30)
  49 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_2.result())
  50 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_6")
  51 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  52 SketchLine_4 = SketchProjection_2.createdFeature()
  53 SketchLine_4.setName("SketchLine_5")
  54 SketchLine_4.result().setName("SketchLine_5")
  55 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_4.result())
  56 SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_7")
  57 SketchProjection_3 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
  58 SketchLine_5 = SketchProjection_3.createdFeature()
  59 SketchLine_5.setName("SketchLine_6")
  60 SketchLine_5.result().setName("SketchLine_6")
  61 SketchArc_1 = Sketch_1.addArc(0, 0, -7.500000000000083, -15.81138830084192, -17.44306393762917, 1.410503622037771, True)
  62 SketchArc_1.setName("SketchArc_2")
  63 SketchArc_1.result().setName("SketchArc_2")
  64 SketchArc_1.results()[1].setName("SketchArc_2_2")
  65 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
  66 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 17.5)
  67 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_1.startPoint())
  68 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_14")
  69 SketchArc_2 = Sketch_1.addArc(-4.499999999999853, -27, -7.500000000000083, -26.99999999999995, -4.499999999999853, -30, False)
  70 SketchArc_2.setName("SketchArc_3")
  71 SketchArc_2.result().setName("SketchArc_3")
  72 SketchArc_2.results()[1].setName("SketchArc_3_2")
  73 SketchPoint_3 = Sketch_1.addPoint(-7.500000000000085, -30)
  74 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchPoint_3.coordinates(), SketchLine_5.result(), 30, True)
  75 SketchPoint_3.setAuxiliary(True)
  76 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchPoint_3.coordinates(), SketchLine_2.result())
  77 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_8")
  78 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchPoint_3.coordinates(), SketchLine_1.result())
  79 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_9")
  80 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_1.endPoint())
  81 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_10")
  82 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_2.startPoint())
  83 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_11")
  84 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result())
  85 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
  86 SketchArc_3 = Sketch_1.addArc(4.499999999999912, -27, 4.499999999999912, -30, 7.499999999999912, -27, False)
  87 SketchArc_3.setName("SketchArc_4")
  88 SketchArc_3.result().setName("SketchArc_4")
  89 SketchArc_3.results()[1].setName("SketchArc_4_2")
  90 SketchPoint_4 = Sketch_1.addPoint(7.499999999999914, -30)
  91 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchPoint_3.coordinates(), SketchPoint_4.coordinates(), 15, False)
  92 SketchPoint_4.setAuxiliary(True)
  93 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchPoint_4.coordinates(), SketchLine_3.result())
  94 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_13")
  95 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchPoint_4.coordinates(), SketchLine_2.result())
  96 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_15")
  97 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_2.endPoint())
  98 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_16")
  99 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_3.startPoint())
 100 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_17")
 101 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_3.result())
 102 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_2.result())
 103 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 3)
 104 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_3.results()[1], SketchArc_2.results()[1])
 105 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_1.result())
 106 SketchMultiRotation_1_objects = [SketchLine_1.result(), SketchArc_2.results()[1], SketchLine_2.result(), SketchArc_3.results()[1], SketchLine_3.result()]
 107 SketchMultiRotation_1 = Sketch_1.addRotation(SketchMultiRotation_1_objects, SketchAPI_Line(SketchLine_5).startPoint(), 360, 3, True)
 108 [SketchLine_6, SketchLine_7, SketchArc_4, SketchArc_5, SketchLine_8, SketchLine_9, SketchArc_6, SketchArc_7, SketchLine_10, SketchLine_11] = SketchMultiRotation_1.rotated()
 109 SketchLine_11.setName("SketchLine_14")
 110 SketchLine_11.result().setName("SketchLine_14")
 111 SketchLine_10.setName("SketchLine_13")
 112 SketchLine_10.result().setName("SketchLine_13")
 113 SketchArc_7.setName("SketchArc_9")
 114 SketchArc_7.result().setName("SketchArc_9")
 115 SketchArc_7.results()[1].setName("SketchArc_9_2")
 116 SketchArc_6.setName("SketchArc_8")
 117 SketchArc_6.result().setName("SketchArc_8")
 118 SketchArc_6.results()[1].setName("SketchArc_8_2")
 119 SketchLine_9.setName("SketchLine_11")
 120 SketchLine_9.result().setName("SketchLine_11")
 121 SketchLine_8.setName("SketchLine_10")
 122 SketchLine_8.result().setName("SketchLine_10")
 123 SketchArc_5.setName("SketchArc_6")
 124 SketchArc_5.result().setName("SketchArc_6")
 125 SketchArc_5.results()[1].setName("SketchArc_6_2")
 126 SketchArc_4.setName("SketchArc_5")
 127 SketchArc_4.result().setName("SketchArc_5")
 128 SketchArc_4.results()[1].setName("SketchArc_5_2")
 129 SketchLine_7.setName("SketchLine_8")
 130 SketchLine_7.result().setName("SketchLine_8")
 131 SketchLine_6.setName("SketchLine_7")
 132 SketchLine_6.result().setName("SketchLine_7")
 133 SketchArc_8 = Sketch_1.addArc(0, 0, -9.943063937629109, 14.40088467880429, 9.94306393762926, 14.40088467880419, True)
 134 SketchArc_8.setName("SketchArc_10")
 135 SketchArc_8.result().setName("SketchArc_10")
 136 SketchArc_8.results()[1].setName("SketchArc_10_2")
 137 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_8.results()[1])
 138 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_1.center(), SketchArc_8.center())
 139 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_18")
 140 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_11.result())
 141 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_19")
 142 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_8.startPoint(), SketchLine_7.result())
 143 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_20")
 144 SketchArc_9 = Sketch_1.addArc(0, 0, 17.44306393762918, 1.410503622037589, 7.499999999999912, -15.81138830084196, True)
 145 SketchArc_9.setName("SketchArc_11")
 146 SketchArc_9.result().setName("SketchArc_11")
 147 SketchArc_9.results()[1].setName("SketchArc_11_2")
 148 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_9.endPoint(), SketchLine_3.endPoint())
 149 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_12")
 150 SketchConstraintEqual_4 = Sketch_1.setEqual(SketchArc_8.results()[1], SketchArc_9.results()[1])
 151 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_8.center(), SketchArc_9.center())
 152 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_21")
 153 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_10.result())
 154 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_22")
 155 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchArc_9.startPoint(), SketchLine_6.result())
 156 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_23")
 157 SketchCircle_1 = Sketch_1.addCircle(0, 0, 24)
 158 SketchCircle_1.setAuxiliary(True)
 159 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchCircle_1.center())
 160 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_24")
 161 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchCircle_1.results()[1], 24)
 162 SketchCircle_2 = Sketch_1.addCircle(0, -24, 4)
 163 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchCircle_1.results()[1], SketchCircle_2.center())
 164 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_25")
 165 SketchConstraintRadius_4 = Sketch_1.setRadius(SketchCircle_2.results()[1], 4)
 166 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_4.result())
 167 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_26")
 168 SketchMultiRotation_2 = Sketch_1.addRotation([SketchCircle_2.results()[1]], SketchAPI_Line(SketchLine_4).startPoint(), 360, 3, True)
 169 [SketchCircle_3, SketchCircle_4] = SketchMultiRotation_2.rotated()
 170 model.do()
 171 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_2f-SketchArc_3_2f-SketchLine_3f-SketchArc_4_2f-SketchLine_4f-SketchArc_11_2f-SketchLine_7f-SketchArc_5_2f-SketchLine_10f-SketchArc_8_2f-SketchLine_13f-SketchArc_10_2f-SketchLine_8f-SketchArc_6_2f-SketchLine_11f-SketchArc_9_2f-SketchLine_14f-SketchArc_2_2f-SketchCircle_2_2r-SketchCircle_3_2r-SketchCircle_4_2r")], model.selection(), "h1", 0)
 172 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
 173 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 174 SketchLine_12 = SketchProjection_4.createdFeature()
 175 SketchLine_12.setName("SketchLine_12")
 176 SketchLine_12.result().setName("SketchLine_12")
 177 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
 178 SketchLine_13 = SketchProjection_5.createdFeature()
 179 SketchLine_13.setName("SketchLine_15")
 180 SketchLine_13.result().setName("SketchLine_15")
 181 SketchLine_14 = Sketch_2.addLine(7.500000000000332, 12.99038105676728, 15, 0)
 182 SketchLine_14.setName("SketchLine_16")
 183 SketchLine_14.result().setName("SketchLine_16")
 184 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_12.result())
 185 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_28")
 186 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_14.startPoint(), "d", True)
 187 SketchConstraintDistance_4 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_14.endPoint(), "d", True)
 188 SketchLine_15 = Sketch_2.addLine(0, 0, 7.500000000000332, 12.99038105676728)
 189 SketchLine_15.setName("SketchLine_17")
 190 SketchLine_15.result().setName("SketchLine_17")
 191 SketchLine_15.setAuxiliary(True)
 192 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_15.startPoint())
 193 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_27")
 194 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchLine_15.endPoint())
 195 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_29")
 196 SketchConstraintAngle_1 = Sketch_2.setAngle(SketchLine_12.result(), SketchLine_15.result(), "360/6")
 197 SketchMultiRotation_3 = Sketch_2.addRotation([SketchLine_14.result()], SketchAPI_Line(SketchLine_12).startPoint(), 360, 6, True)
 198 [SketchLine_16, SketchLine_17, SketchLine_18, SketchLine_19, SketchLine_20] = SketchMultiRotation_3.rotated()
 199 SketchLine_20.setName("SketchLine_22")
 200 SketchLine_20.result().setName("SketchLine_22")
 201 SketchLine_19.setName("SketchLine_21")
 202 SketchLine_19.result().setName("SketchLine_21")
 203 SketchLine_18.setName("SketchLine_20")
 204 SketchLine_18.result().setName("SketchLine_20")
 205 SketchLine_17.setName("SketchLine_19")
 206 SketchLine_17.result().setName("SketchLine_19")
 207 SketchLine_16.setName("SketchLine_18")
 208 SketchLine_16.result().setName("SketchLine_18")
 209 model.do()
 210 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r-SketchLine_16r_wire")], model.selection(), "h2-h3-h1", 0)
 211 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face"))
 212 SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 213 SketchLine_21 = SketchProjection_6.createdFeature()
 214 SketchLine_21.setName("SketchLine_23")
 215 SketchLine_21.result().setName("SketchLine_23")
 216 SketchCircle_5 = Sketch_3.addCircle(0, 0, 10)
 217 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchAPI_Line(SketchLine_21).startPoint(), SketchCircle_5.center())
 218 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30")
 219 SketchConstraintRadius_5 = Sketch_3.setRadius(SketchCircle_5.results()[1], 10)
 220 model.do()
 221 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
 222 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2f")], model.selection(), 0, 60, [model.selection("SOLID", "Fuse_1_1")])
 223 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/From_Face"))
 224 SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 225 SketchLine_22 = SketchProjection_7.createdFeature()
 226 SketchLine_22.setName("SketchLine_24")
 227 SketchLine_22.result().setName("SketchLine_24")
 228 SketchCircle_6 = Sketch_4.addCircle(0, 0, 12.5)
 229 SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_22).startPoint(), SketchCircle_6.center())
 230 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_31")
 231 SketchConstraintRadius_6 = Sketch_4.setRadius(SketchCircle_6.results()[1], 12.5)
 232 model.do()
 233 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_2f-SketchArc_3_2f-SketchLine_3f-SketchArc_4_2f-SketchLine_4f-SketchArc_11_2f-SketchLine_7f-SketchArc_5_2f-SketchLine_10f-SketchArc_8_2f-SketchLine_13f-SketchArc_10_2f-SketchLine_8f-SketchArc_6_2f-SketchLine_11f-SketchArc_9_2f-SketchLine_14f-SketchArc_2_2f-SketchCircle_2_2r-SketchCircle_3_2r-SketchCircle_4_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 234 Fillet_1_objects = [model.selection("EDGE", "[Fuse_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_20]"), model.selection("EDGE", "[Fuse_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_21]"), model.selection("EDGE", "[Fuse_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_22]"), model.selection("EDGE", "[Fuse_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_16]"), model.selection("EDGE", "[Fuse_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_19]"), model.selection("EDGE", "[Fuse_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_18]")]
 235 Fillet_1 = model.addFillet(Part_1_doc, Fillet_1_objects, 1)
 236 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_2_1/To_Face"))
 237 SketchProjection_8 = Sketch_5.addProjection(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Extrusion_2_1/To_Face][ExtrusionCut_1_1/Generated_Face&Sketch_3/SketchCircle_5_2]__cc"), False)
 238 SketchPoint_5 = SketchProjection_8.createdFeature()
 239 SketchCircle_7 = Sketch_5.addCircle(0, 0, 22)
 240 SketchConstraintCoincidence_28 = Sketch_5.setCoincident(SketchPoint_5.result(), SketchCircle_7.center())
 241 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_32")
 242 SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_7.results()[1], 22)
 243 model.do()
 244 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_7_2f")], model.selection(), "h3", 0)
 245 Fuse_2 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Fillet_1_1"), model.selection("SOLID", "Extrusion_3_1")])
 246 Sketch_6 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
 247 SketchLine_23 = Sketch_6.addLine(22, 70, 20, 70)
 248 SketchLine_23.setName("SketchLine_25")
 249 SketchLine_23.result().setName("SketchLine_25")
 250 SketchProjection_9 = Sketch_6.addProjection(model.selection("VERTEX", "[Extrusion_3_1/Generated_Face&Sketch_5/SketchCircle_7_2][Extrusion_3_1/To_Face]"), False)
 251 SketchPoint_6 = SketchProjection_9.createdFeature()
 252 SketchConstraintCoincidence_29 = Sketch_6.setCoincident(SketchLine_23.startPoint(), SketchPoint_6.result())
 253 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_33")
 254 SketchLine_24 = Sketch_6.addLine(20, 70, 22, 68.84529946162075)
 255 SketchLine_24.setName("SketchLine_26")
 256 SketchLine_24.result().setName("SketchLine_26")
 257 SketchConstraintCoincidence_30 = Sketch_6.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
 258 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_34")
 259 SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "([Extrusion_3_1/Generated_Face&Sketch_5/SketchCircle_7_2][Extrusion_3_1/To_Face])_Fuse_2_1"), False)
 260 SketchLine_25 = SketchProjection_10.createdFeature()
 261 SketchLine_25.setName("SketchLine_27")
 262 SketchLine_25.result().setName("SketchLine_27")
 263 SketchConstraintCoincidence_31 = Sketch_6.setCoincident(SketchLine_24.endPoint(), SketchLine_25.result())
 264 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_35")
 265 SketchLine_26 = Sketch_6.addLine(22, 68.84529946162075, 22, 70)
 266 SketchLine_26.setName("SketchLine_28")
 267 SketchLine_26.result().setName("SketchLine_28")
 268 SketchConstraintCoincidence_32 = Sketch_6.setCoincident(SketchLine_24.endPoint(), SketchLine_26.startPoint())
 269 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_36")
 270 SketchConstraintCoincidence_33 = Sketch_6.setCoincident(SketchLine_23.startPoint(), SketchLine_26.endPoint())
 271 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_37")
 272 SketchLine_27 = Sketch_6.addLine(21.99999999999999, 64, 22, 63)
 273 SketchLine_27.setName("SketchLine_29")
 274 SketchLine_27.result().setName("SketchLine_29")
 275 SketchConstraintCoincidence_34 = Sketch_6.setCoincident(SketchLine_27.startPoint(), SketchLine_25.result())
 276 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_38")
 277 SketchConstraintCoincidence_35 = Sketch_6.setCoincident(SketchAPI_Line(SketchLine_25).startPoint(), SketchLine_27.endPoint())
 278 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_39")
 279 SketchLine_28 = Sketch_6.addLine(21.99999999999999, 64, 21.73205080756888, 63)
 280 SketchLine_28.setName("SketchLine_30")
 281 SketchLine_28.result().setName("SketchLine_30")
 282 SketchConstraintCoincidence_36 = Sketch_6.setCoincident(SketchLine_27.startPoint(), SketchLine_28.startPoint())
 283 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_40")
 284 SketchLine_29 = Sketch_6.addLine(21.73205080756888, 63, 22, 63)
 285 SketchLine_29.setName("SketchLine_31")
 286 SketchLine_29.result().setName("SketchLine_31")
 287 SketchConstraintCoincidence_37 = Sketch_6.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
 288 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_41")
 289 SketchConstraintCoincidence_38 = Sketch_6.setCoincident(SketchAPI_Line(SketchLine_25).startPoint(), SketchLine_29.endPoint())
 290 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_42")
 291 SketchConstraintLength_1 = Sketch_6.setLength(SketchLine_23.result(), 2)
 292 SketchConstraintAngle_2 = Sketch_6.setAngleBackward(SketchLine_23.result(), SketchLine_24.result(), 30)
 293 SketchConstraintHorizontal_2 = Sketch_6.setHorizontal(SketchLine_23.result())
 294 SketchConstraintHorizontal_2.setName("SketchConstraintHorizontal_3")
 295 SketchConstraintHorizontal_3 = Sketch_6.setHorizontal(SketchLine_29.result())
 296 SketchConstraintHorizontal_3.setName("SketchConstraintHorizontal_4")
 297 SketchConstraintLength_2 = Sketch_6.setLength(SketchLine_27.result(), 1)
 298 SketchConstraintAngle_3 = Sketch_6.setAngle(SketchLine_28.result(), SketchLine_27.result(), 15)
 299 model.do()
 300 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
 301 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Fuse_2_1")], [model.selection("SOLID", "Revolution_1_2"), model.selection("SOLID", "Revolution_1_1")])
 302 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Cut_1_1/Modified_Face&Extrusion_3_1/To_Face"))
 303 SketchProjection_11 = Sketch_7.addProjection(model.selection("VERTEX", "[Revolution_1_1/Generated_Face&Sketch_6/SketchLine_26][Cut_1_1/Modified_Face&Extrusion_3_1/To_Face]__cc"), False)
 304 SketchPoint_7 = SketchProjection_11.createdFeature()
 305 SketchCircle_8 = Sketch_7.addCircle(0, 0, 26)
 306 SketchCircle_8.setAuxiliary(True)
 307 SketchConstraintCoincidence_39 = Sketch_7.setCoincident(SketchPoint_7.result(), SketchCircle_8.center())
 308 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_43")
 309 SketchConstraintRadius_8 = Sketch_7.setRadius(SketchCircle_8.results()[1], 26)
 310 SketchCircle_9 = Sketch_7.addCircle(0, -26, 5.25)
 311 SketchConstraintCoincidence_40 = Sketch_7.setCoincident(SketchCircle_8.results()[1], SketchCircle_9.center())
 312 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_44")
 313 SketchProjection_12 = Sketch_7.addProjection(model.selection("EDGE", "PartSet/OY"), False)
 314 SketchLine_30 = SketchProjection_12.createdFeature()
 315 SketchLine_30.setName("SketchLine_32")
 316 SketchLine_30.result().setName("SketchLine_32")
 317 SketchConstraintRadius_9 = Sketch_7.setRadius(SketchCircle_9.results()[1], 5.25)
 318 SketchConstraintCoincidence_41 = Sketch_7.setCoincident(SketchCircle_9.center(), SketchLine_30.result())
 319 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_45")
 320 SketchMultiRotation_4 = Sketch_7.addRotation([SketchCircle_9.results()[1]], SketchAPI_Line(SketchLine_30).startPoint(), 360, 16, True)
 321 [SketchCircle_10, SketchCircle_11, SketchCircle_12, SketchCircle_13, SketchCircle_14, SketchCircle_15, SketchCircle_16, SketchCircle_17, SketchCircle_18, SketchCircle_19, SketchCircle_20, SketchCircle_21, SketchCircle_22, SketchCircle_23, SketchCircle_24] = SketchMultiRotation_4.rotated()
 322 model.do()
 323 Extrusion_4_objects = [model.selection("FACE", "Sketch_7/Face-SketchCircle_19_2f-SketchCircle_20_2r-SketchCircle_19_2f-SketchCircle_19_2f-SketchCircle_18_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_18_2f-SketchCircle_19_2r-SketchCircle_18_2f-SketchCircle_17_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_17_2f-SketchCircle_18_2r-SketchCircle_18_2r-SketchCircle_17_2f-SketchCircle_16_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_15_2f-SketchCircle_15_2f-SketchCircle_16_2r-SketchCircle_15_2f-SketchCircle_14_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_16_2f-SketchCircle_16_2f-SketchCircle_17_2r-SketchCircle_17_2r-SketchCircle_16_2f-SketchCircle_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_14_2f-SketchCircle_14_2f-SketchCircle_15_2r-SketchCircle_14_2f-SketchCircle_13_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_13_2f-SketchCircle_13_2f-SketchCircle_14_2r-SketchCircle_13_2f-SketchCircle_12_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_12_2f-SketchCircle_12_2f-SketchCircle_13_2r-SketchCircle_12_2f-SketchCircle_11_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_11_2f-SketchCircle_11_2f-SketchCircle_12_2r-SketchCircle_11_2f-SketchCircle_10_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_9_2r-SketchCircle_10_2f-SketchCircle_10_2f-SketchCircle_11_2r-SketchCircle_10_2f-SketchCircle_9_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_9_2f-SketchCircle_24_2r-SketchCircle_24_2r-SketchCircle_9_2f-SketchCircle_10_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_24_2f-SketchCircle_23_2r-SketchCircle_24_2f-SketchCircle_9_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_23_2f-SketchCircle_24_2r-SketchCircle_23_2f-SketchCircle_23_2f-SketchCircle_22_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_22_2f-SketchCircle_23_2r-SketchCircle_22_2f-SketchCircle_22_2f-SketchCircle_21_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_21_2f-SketchCircle_22_2r-SketchCircle_21_2f-SketchCircle_21_2f-SketchCircle_20_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_20_2f-SketchCircle_21_2r-SketchCircle_20_2f-SketchCircle_20_2f-SketchCircle_19_2r")]
 324 Extrusion_4 = model.addExtrusion(Part_1_doc, Extrusion_4_objects, model.selection(), model.selection("FACE", "Sketch_5/Face-SketchCircle_7_2f"), 0, model.selection(), 0)
 325 model.do()
 326 # change the parameter value
 327 param_h2.setValue(90)
 328 model.end()
 329 # check the final extrusion is valid:
 330 aFactory = ModelAPI_Session.get().validators()
 331 assert(aFactory.validate(Extrusion_4.feature()))
 332
 333 model.testResultsVolumes(Extrusion_4, [597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447, 597.118881248058755772945005447])