src/ModelAPI/Test/Test2493.py

   1 # Copyright (C) 2014-2021  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 model.addParameter(Part_1_doc, "h1", "15")
  29 model.addParameter(Part_1_doc, "h3", "7")
  30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  31 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  32 SketchPoint_1 = SketchProjection_1.createdFeature()
  33 SketchCircle_1 = Sketch_1.addCircle(0, 0, 24)
  34 SketchCircle_1.setAuxiliary(True)
  35 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
  36 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], "48/2")
  37 SketchCircle_2 = Sketch_1.addCircle(0, -24, 4)
  38 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchCircle_1.results()[1], SketchCircle_2.center())
  39 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
  40 SketchLine_1 = SketchProjection_2.createdFeature()
  41 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_1.result())
  42 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchCircle_2.results()[1], 4)
  43 SketchLine_2 = Sketch_1.addLine(-7.50000000000032, -15.81138830084174, -7.500000000000001, -27)
  44 SketchLine_2.setName("SketchLine_3")
  45 SketchLine_2.result().setName("SketchLine_3")
  46 SketchLine_3 = Sketch_1.addLine(-4.500000000000001, -30, 4.500000000000001, -30)
  47 SketchLine_3.setName("SketchLine_4")
  48 SketchLine_3.result().setName("SketchLine_4")
  49 SketchLine_4 = Sketch_1.addLine(7.500000000000001, -27, 7.49999999999943, -15.81138830084217)
  50 SketchLine_4.setName("SketchLine_5")
  51 SketchLine_4.result().setName("SketchLine_5")
  52 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  53 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result())
  54 SketchConstraintHorizontal_1.setName("SketchConstraintHorizontal_2")
  55 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  56 SketchPoint_2 = Sketch_1.addPoint(0, -30)
  57 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_3.result())
  58 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_8")
  59 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_1.result())
  60 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_9")
  61 SketchProjection_3 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
  62 SketchLine_5 = SketchProjection_3.createdFeature()
  63 SketchLine_5.setName("SketchLine_6")
  64 SketchLine_5.result().setName("SketchLine_6")
  65 SketchArc_1 = Sketch_1.addArc(-4.500000000000001, -27, -7.500000000000001, -27, -4.500000000000001, -30, False)
  66 SketchPoint_3 = Sketch_1.addPoint(-7.500000000000001, -30)
  67 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchPoint_3.coordinates(), SketchLine_5.result(), 30, True)
  68 SketchPoint_3.setAuxiliary(True)
  69 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchPoint_3.coordinates(), SketchLine_2.result())
  70 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_11")
  71 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchPoint_3.coordinates(), SketchLine_3.result())
  72 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_12")
  73 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.endPoint())
  74 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_13")
  75 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_3.startPoint())
  76 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_14")
  77 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_2.result())
  78 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
  79 SketchArc_2 = Sketch_1.addArc(4.500000000000001, -27, 4.500000000000001, -30, 7.500000000000001, -27, False)
  80 SketchPoint_4 = Sketch_1.addPoint(7.5, -30)
  81 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchPoint_3.coordinates(), SketchPoint_4.coordinates(), 15, False)
  82 SketchPoint_4.setAuxiliary(True)
  83 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchPoint_4.coordinates(), SketchLine_4.result())
  84 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_15")
  85 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchPoint_4.coordinates(), SketchLine_3.result())
  86 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_16")
  87 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_3.endPoint())
  88 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_17")
  89 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
  90 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_18")
  91 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_4.result())
  92 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_3.result())
  93 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_3.result())
  94 SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_1.results()[1], 3)
  95 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_2.results()[1], SketchArc_1.results()[1])
  96 SketchArc_3 = Sketch_1.addArc(0, 0, 7.49999999999943, -15.81138830084217, 17.44306393762918, 1.410503622037278, False)
  97 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchArc_3.center())
  98 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_10")
  99 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_3.results()[1], "35/2")
 100 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_4.endPoint())
 101 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_20")
 102 SketchMultiRotation_1_objects = [SketchLine_2.result(), SketchArc_1.results()[1], SketchLine_3.result(), SketchArc_2.results()[1], SketchLine_4.result(), SketchCircle_2.results()[1]]
 103 SketchMultiRotation_1 = Sketch_1.addRotation(SketchMultiRotation_1_objects, SketchAPI_Line(SketchLine_5).startPoint(), 120, 3)
 104 [SketchLine_6, SketchLine_7, SketchArc_4, SketchArc_5, SketchLine_8, SketchLine_9, SketchArc_6, SketchArc_7, SketchLine_10, SketchLine_11, SketchCircle_3, SketchCircle_4] = SketchMultiRotation_1.rotated()
 105 SketchLine_11.setName("SketchLine_12")
 106 SketchLine_11.result().setName("SketchLine_12")
 107 SketchLine_10.setName("SketchLine_9")
 108 SketchLine_10.result().setName("SketchLine_9")
 109 SketchArc_6.setName("SketchArc_5")
 110 SketchArc_6.result().setName("SketchArc_5")
 111 SketchArc_6.results()[1].setName("SketchArc_5_2")
 112 SketchLine_9.setName("SketchLine_11")
 113 SketchLine_9.result().setName("SketchLine_11")
 114 SketchArc_5.setName("SketchArc_6")
 115 SketchArc_5.result().setName("SketchArc_6")
 116 SketchArc_5.results()[1].setName("SketchArc_6_2")
 117 SketchLine_7.setName("SketchLine_10")
 118 SketchLine_7.result().setName("SketchLine_10")
 119 SketchLine_6.setName("SketchLine_7")
 120 SketchLine_6.result().setName("SketchLine_7")
 121 SketchArc_8 = Sketch_1.addArc(0, 0, -17.4430639376291, 1.410503622038327, -7.50000000000032, -15.81138830084174, False)
 122 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_2.startPoint())
 123 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_21")
 124 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchArc_3.results()[1], SketchArc_8.results()[1])
 125 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_8.center())
 126 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_19")
 127 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_8.startPoint(), SketchLine_11.result())
 128 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_22")
 129 SketchArc_9 = Sketch_1.addArc(0, 0, 9.943063937629693, 14.40088467880386, -9.943063937628841, 14.40088467880445, False)
 130 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchArc_9.endPoint(), SketchLine_7.result())
 131 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_23")
 132 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchArc_3.results()[1], SketchArc_9.results()[1])
 133 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_9.center())
 134 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_24")
 135 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_6.result())
 136 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_25")
 137 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchArc_9.startPoint(), SketchLine_10.result())
 138 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_26")
 139 model.do()
 140 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_3f-SketchArc_1_2f-SketchLine_4f-SketchArc_2_2f-SketchLine_5f-SketchArc_3_2f-SketchLine_7f-SketchArc_4_2f-SketchLine_9f-SketchArc_5_2f-SketchLine_9f-SketchArc_9_2f-SketchLine_10f-SketchArc_6_2f-SketchLine_11f-SketchArc_7_2f-SketchLine_12f-SketchArc_8_2f-SketchCircle_2_2r-SketchCircle_4_2r-SketchCircle_3_2r")], model.selection(), "h1", 0)
 141 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
 142 SketchLine_12 = Sketch_2.addLine(-7.499999999996014, 12.99038105676981, 7.499999999996014, 12.99038105676981)
 143 SketchLine_12.setName("SketchLine_13")
 144 SketchLine_12.result().setName("SketchLine_13")
 145 SketchLine_13 = Sketch_2.addLine(7.499999999996014, 12.99038105676981, 15, 0)
 146 SketchLine_13.setName("SketchLine_14")
 147 SketchLine_13.result().setName("SketchLine_14")
 148 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
 149 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_27")
 150 SketchLine_14 = Sketch_2.addLine(15, 0, 7.499999999996014, -12.99038105676981)
 151 SketchLine_14.setName("SketchLine_15")
 152 SketchLine_14.result().setName("SketchLine_15")
 153 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 154 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_28")
 155 SketchLine_15 = Sketch_2.addLine(7.499999999996014, -12.99038105676981, -7.499999999996014, -12.99038105676981)
 156 SketchLine_15.setName("SketchLine_16")
 157 SketchLine_15.result().setName("SketchLine_16")
 158 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
 159 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_29")
 160 SketchLine_16 = Sketch_2.addLine(-7.499999999996014, -12.99038105676981, -15, 0)
 161 SketchLine_16.setName("SketchLine_17")
 162 SketchLine_16.result().setName("SketchLine_17")
 163 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 164 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30")
 165 SketchLine_17 = Sketch_2.addLine(-15, 0, -7.499999999996014, 12.99038105676981)
 166 SketchLine_17.setName("SketchLine_18")
 167 SketchLine_17.result().setName("SketchLine_18")
 168 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
 169 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_31")
 170 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_12.startPoint(), SketchLine_17.endPoint())
 171 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_32")
 172 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_12.result())
 173 SketchConstraintHorizontal_2.setName("SketchConstraintHorizontal_3")
 174 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_15.result())
 175 SketchConstraintHorizontal_3.setName("SketchConstraintHorizontal_4")
 176 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 177 SketchLine_18 = SketchProjection_4.createdFeature()
 178 SketchLine_18.setName("SketchLine_19")
 179 SketchLine_18.result().setName("SketchLine_19")
 180 SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
 181 SketchLine_19 = SketchProjection_5.createdFeature()
 182 SketchLine_19.setName("SketchLine_20")
 183 SketchLine_19.result().setName("SketchLine_20")
 184 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchLine_18.result())
 185 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_33")
 186 SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_18.result())
 187 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_34")
 188 SketchPoint_5 = Sketch_2.addPoint(-1.694065894508601e-21, 12.99038105676981)
 189 SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchPoint_5.coordinates(), SketchLine_12.result())
 190 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_35")
 191 SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_12.result(), SketchPoint_5.coordinates())
 192 SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchPoint_5.coordinates(), SketchLine_19.result())
 193 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_36")
 194 SketchPoint_6 = Sketch_2.addPoint(-2.541098841762901e-21, -12.99038105676981)
 195 SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchPoint_6.coordinates(), SketchLine_15.result())
 196 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_37")
 197 SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchPoint_6.coordinates(), SketchLine_19.result())
 198 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_38")
 199 SketchConstraintMiddle_3 = Sketch_2.setMiddlePoint(SketchLine_15.result(), SketchPoint_6.coordinates())
 200 SketchCircle_5 = Sketch_2.addCircle(0, 0, 15)
 201 SketchCircle_5.setAuxiliary(True)
 202 SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_18).startPoint(), SketchCircle_5.center())
 203 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_39")
 204 SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchCircle_5.results()[1])
 205 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_40")
 206 SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchCircle_5.results()[1])
 207 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_41")
 208 SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchCircle_5.results()[1])
 209 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_42")
 210 SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchCircle_5.results()[1])
 211 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_43")
 212 SketchConstraintEqual_4 = Sketch_2.setEqual(SketchLine_17.result(), SketchLine_12.result())
 213 SketchConstraintEqual_5 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_15.result())
 214 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_5.results()[1], 15)
 215 model.do()
 216 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_18r-SketchLine_17r-SketchLine_16r-SketchLine_15r-SketchLine_14r-SketchLine_13r")], model.selection(), "97-h3-h1", 0)
 217 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face"))
 218 SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 219 SketchLine_20 = SketchProjection_6.createdFeature()
 220 SketchLine_20.setName("SketchLine_21")
 221 SketchLine_20.result().setName("SketchLine_21")
 222 SketchCircle_6 = Sketch_3.addCircle(0, 0, 10)
 223 SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchAPI_Line(SketchLine_20).startPoint(), SketchCircle_6.center())
 224 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_44")
 225 SketchConstraintRadius_6 = Sketch_3.setRadius(SketchCircle_6.results()[1], 10)
 226 model.do()
 227 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_6_2f")], model.selection(), 0, 60, [model.selection("SOLID", "Extrusion_2_1")])
 228 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/From_Face"))
 229 SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 230 SketchLine_21 = SketchProjection_7.createdFeature()
 231 SketchLine_21.setName("SketchLine_22")
 232 SketchLine_21.result().setName("SketchLine_22")
 233 SketchCircle_7 = Sketch_4.addCircle(0, 0, 12.5)
 234 SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_21).startPoint(), SketchCircle_7.center())
 235 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_45")
 236 SketchConstraintRadius_7 = Sketch_4.setRadius(SketchCircle_7.results()[1], "25/2")
 237 model.do()
 238 # check parameter is changed, so, FromFace becomes out of resulting solid, but Sketch_4 is still valid
 239 Extrusion_2.toSize().setValue(48)
 240 model.end()
 241
 242 from ModelAPI import *
 243 aFactory = ModelAPI_Session.get().validators()
 244 assert(aFactory.validate(Sketch_4.feature()))