src/ModelAPI/Test/Test2491.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 # -*- coding: utf-8 -*-
  22
  23 from SketchAPI import *
  24
  25 from salome.shaper import model
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  32 SketchLine_1 = Sketch_1.addLine(-17.23654191510763, 16.36770059625792, -4.760492650097915, 19.42518236023452)
  33 SketchLine_2 = Sketch_1.addLine(20, 2.492755359431925e-15, 20, -31)
  34 SketchLine_3 = Sketch_1.addLine(-25.74772708486752, -20, -17.21320343559642, -20)
  35 SketchLine_4 = Sketch_1.addLine(-13.67766952966368, -21.46446609406726, 2.928932188134523, -38.07106781186547)
  36 SketchArc_1 = Sketch_1.addArc(-17.21320343559642, -25, -13.67766952966368, -21.46446609406726, -17.21320343559642, -20, False)
  37 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_4.startPoint())
  38 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_3.endPoint())
  39 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_4.result())
  40 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
  41 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result())
  42 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  43 SketchArc_2 = Sketch_1.addArc(0, 6.520200294596256e-23, -4.760492650097915, 19.42518236023452, 20, 2.492755359431925e-15, True)
  44 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchArc_2.startPoint())
  45 SketchArc_3 = Sketch_1.addArc(-12, -5, -29.79117622747561, -17.94117647058824, -17.23654191510763, 16.36770059625792, True)
  46 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_1.startPoint())
  47 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_5")
  48 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_1.result())
  49 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_2.startPoint())
  50 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_6")
  51 SketchArc_4 = Sketch_1.addArc(-25.74772708486752, -15, -29.79117622747561, -17.94117647058824, -25.74772708486752, -20, False)
  52 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchArc_3.startPoint())
  53 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_7")
  54 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_3.startPoint())
  55 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
  56 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_3.result())
  57 SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchArc_3.results()[1])
  58 SketchArc_5 = Sketch_1.addArc(10, -31, 20, -31, 2.928932188134523, -38.07106781186547, True)
  59 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_5.startPoint())
  60 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
  61 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_4.endPoint())
  62 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
  63 SketchConstraintTangent_6 = Sketch_1.setTangent(SketchArc_5.results()[1], SketchLine_4.result())
  64 SketchConstraintTangent_7 = Sketch_1.setTangent(SketchLine_2.result(), SketchArc_5.results()[1])
  65 SketchConstraintTangent_8 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_2.results()[1])
  66 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 31)
  67 SketchConstraintTangent_9 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result())
  68 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_3.result(), SketchLine_4.result(), 135)
  69 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 5)
  70 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_4.results()[1], SketchArc_1.results()[1])
  71 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_5.results()[1], 10)
  72 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_2.results()[1], 20)
  73 SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_3.results()[1], 22)
  74 SketchCircle_1 = Sketch_1.addCircle(-22, -5, 7.5)
  75 SketchLine_5 = Sketch_1.addLine(-22, -5, -12, -5)
  76 SketchLine_5.setAuxiliary(True)
  77 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_5.startPoint())
  78 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
  79 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_5.endPoint())
  80 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
  81 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_5.result())
  82 SketchConstraintRadius_5 = Sketch_1.setRadius(SketchCircle_1.results()[1], 7.5)
  83 SketchCircle_2 = Sketch_1.addCircle(0, 6.520200294596256e-23, 10)
  84 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.center(), SketchCircle_2.center())
  85 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
  86 SketchConstraintRadius_6 = Sketch_1.setRadius(SketchCircle_2.results()[1], 10)
  87 SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchCircle_2.center(), SketchArc_3.center(), 5)
  88 SketchCircle_3 = Sketch_1.addCircle(7, -25, 7.5)
  89 SketchConstraintRadius_7 = Sketch_1.setRadius(SketchCircle_3.results()[1], 7.5)
  90 SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchArc_2.center(), SketchCircle_3.center(), 7)
  91 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchCircle_2.center(), SketchLine_3.result(), 20, True)
  92 SketchConstraintDistanceVertical_2 = Sketch_1.setVerticalDistance(SketchArc_2.center(), SketchCircle_3.center(), 25)
  93 SketchConstraintDistanceHorizontal_2 = Sketch_1.setHorizontalDistance(SketchLine_5.endPoint(), SketchArc_2.center(), 12)
  94 SketchConstraintDistanceHorizontal_3 = Sketch_1.setHorizontalDistance(SketchCircle_1.center(), SketchArc_2.center(), 22)
  95 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  96 SketchPoint_1 = SketchProjection_1.createdFeature()
  97 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchAPI_Point(SketchPoint_1).coordinates())
  98 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_14")
  99 model.do()
 100 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_3_2f-SketchArc_4_2f-SketchLine_3f-SketchArc_1_2r-SketchLine_4f-SketchArc_5_2f-SketchLine_2r-SketchArc_2_2f-SketchLine_1r-SketchCircle_1_2r-SketchCircle_2_2r-SketchCircle_3_2r")], model.selection(), 6.5, 0)
 101 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2"))
 102 SketchLine_6 = Sketch_2.addLine(14.45330132699559, 5.092287733454298, -12.15814035598059, 5.092287733454298)
 103 SketchLine_7 = Sketch_2.addLine(-12.15814035598059, 5.092287733454298, -12.15814035598059, 23.78152371848275)
 104 SketchLine_8 = Sketch_2.addLine(-12.15814035598059, 23.78152371848275, 14.45330132699559, 23.78152371848275)
 105 SketchLine_9 = Sketch_2.addLine(14.45330132699559, 23.78152371848275, 14.45330132699559, 5.092287733454298)
 106 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
 107 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15")
 108 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
 109 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
 110 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
 111 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17")
 112 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
 113 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
 114 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
 115 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_7.result())
 116 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
 117 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_9.result())
 118 model.do()
 119 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 0, 100, [model.selection("SOLID", "Extrusion_1_1")])
 120 model.do()
 121 model.testHaveNamingSubshapes(Extrusion_1, model, Part_1_doc)
 122 model.end()
 123 assert(model.checkPythonDump())