src/ModelAPI/Test/Test2396.py

   1 ## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from GeomAPI import *
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  30 SketchLine_1 = Sketch_1.addLine(50, -50, -50, -50)
  31 SketchLine_2 = Sketch_1.addLine(-50, -50, -50, 50)
  32 SketchLine_3 = Sketch_1.addLine(-50, 50, 50, 50)
  33 SketchLine_4 = Sketch_1.addLine(50, 50, 50, -50)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  39 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  40 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  41 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  42 model.do()
  43
  44 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r")], model.selection(), 100, 0)
  45 Extrusion_1.result().setName("Cube")
  46
  47 Edge_1_objects = [model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"),
  48                   model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"),
  49                   model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"),
  50                   model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"),
  51                   model.selection("EDGE", "Cube/Generated_Face_2&Cube/Generated_Face_1"),
  52                   model.selection("EDGE", "Cube/Generated_Face_2&Cube/From_Face_1"),
  53                   model.selection("EDGE", "Cube/Generated_Face_2&Cube/To_Face_1"),
  54                   model.selection("EDGE", "Cube/Generated_Face_3&Cube/Generated_Face_2"),
  55                   model.selection("EDGE", "Cube/Generated_Face_1&Cube/From_Face_1"),
  56                   model.selection("EDGE", "Cube/Generated_Face_3&Cube/To_Face_1"),
  57                   model.selection("EDGE", "Cube/Generated_Face_3&Cube/From_Face_1"),
  58                   model.selection("EDGE", "Cube/Generated_Face_1&Cube/To_Face_1"),
  59                   model.selection("EDGE", "Cube/Generated_Face_4&Cube/Generated_Face_1"),
  60                   model.selection("EDGE", "Cube/Generated_Face_4&Cube/From_Face_1"),
  61                   model.selection("EDGE", "Cube/Generated_Face_4&Cube/To_Face_1"),
  62                   model.selection("EDGE", "Cube/Generated_Face_4&Cube/Generated_Face_3")]
  63 Edge_1 = model.addEdge(Part_1_doc, Edge_1_objects)
  64 # check all the names of Edge_1 results are different
  65 names = set()
  66 for res in Edge_1.results():
  67     names.add(res.name())
  68 assert(len(names) == len(Edge_1.results())), "Some edges have equal name"
  69
  70 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  71 SketchCircle_1 = Sketch_2.addCircle(200, 0, 50)
  72 model.do()
  73 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2f")], model.selection("EDGE", "Cube"), 10, 0)
  74 model.do()
  75 # check Extrusion_2
  76 model.testNbResults(Extrusion_2, 1)
  77 model.testNbSubResults(Extrusion_2, [0])
  78 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.SOLID, [1])
  79 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.FACE, [3])
  80 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.EDGE, [6])
  81 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.VERTEX, [12])
  82 model.testResultsVolumes(Extrusion_2, [78539.81633974483])
  83
  84 model.end()
  85
  86 assert(model.checkPythonDump())