src/ModelAPI/Test/Test2396.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21 from GeomAPI import GeomAPI_Shape
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(50, -50, -50, -50)
  29 SketchLine_2 = Sketch_1.addLine(-50, -50, -50, 50)
  30 SketchLine_3 = Sketch_1.addLine(-50, 50, 50, 50)
  31 SketchLine_4 = Sketch_1.addLine(50, 50, 50, -50)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  35 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  37 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  38 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  39 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  40 model.do()
  41 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 100, 0)
  42 Extrusion_1.result().setName("Cube")
  43 Edge_1_objects = [model.selection("EDGE", "Sketch_1/SketchLine_2"), model.selection("EDGE", "Sketch_1/SketchLine_3"), model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("EDGE", "Sketch_1/SketchLine_4"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_2][Cube/Generated_Face&Sketch_1/SketchLine_1]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_2][Cube/From_Face]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_2][Cube/To_Face]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_3][Cube/Generated_Face&Sketch_1/SketchLine_2]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_1][Cube/From_Face]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_3][Cube/To_Face]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_3][Cube/From_Face]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_1][Cube/To_Face]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_4][Cube/Generated_Face&Sketch_1/SketchLine_1]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_4][Cube/From_Face]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_4][Cube/To_Face]"), model.selection("EDGE", "[Cube/Generated_Face&Sketch_1/SketchLine_4][Cube/Generated_Face&Sketch_1/SketchLine_3]")]
  44 Edge_1 = model.addEdge(Part_1_doc, Edge_1_objects)
  45 # check all the names of Edge_1 results are different
  46 names = set()
  47 for res in Edge_1.results():
  48     names.add(res.name())
  49 assert(len(names) == len(Edge_1.results())), "Some edges have equal name"
  50
  51 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  52 SketchCircle_1 = Sketch_2.addCircle(200, 0, 50)
  53 model.do()
  54 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2r")], model.selection("EDGE", "Cube"), 10, 0)
  55 model.do()
  56 # check Extrusion_2
  57 model.testNbResults(Extrusion_2, 1)
  58 model.testNbSubResults(Extrusion_2, [0])
  59 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.SOLID, [1])
  60 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.FACE, [3])
  61 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.EDGE, [6])
  62 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.VERTEX, [12])
  63 model.testResultsVolumes(Extrusion_2, [78539.81633974483])
  64
  65 model.end()
  66
  67 assert(model.checkPythonDump())