src/ModelAPI/Test/Test2391.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 WidthParam = model.addParameter(Part_1_doc, "Width", "64")
  29 model.addParameter(Part_1_doc, "Depth", "33")
  30 model.addParameter(Part_1_doc, "D1_out", "38")
  31 model.addParameter(Part_1_doc, "D2_out", "33")
  32 model.addParameter(Part_1_doc, "D3_out", "30")
  33 model.addParameter(Part_1_doc, "D4_out", "20")
  34 model.addParameter(Part_1_doc, "D1_in", "21")
  35 model.addParameter(Part_1_doc, "D2_in", "5")
  36 model.addParameter(Part_1_doc, "Channel_Depth", "1.3")
  37 model.addParameter(Part_1_doc, "Channel_Width", "1.5")
  38 model.addParameter(Part_1_doc, "Drill1_Loc", "7.5")
  39 model.addParameter(Part_1_doc, "Drill1_Radius", "2.25")
  40 model.addParameter(Part_1_doc, "Drill1Holder_Width", "8")
  41 model.addParameter(Part_1_doc, "Drill2_Loc", "6.5")
  42 model.addParameter(Part_1_doc, "Drill2_Radius", "1.4")
  43 model.addParameter(Part_1_doc, "Drill2_InnerRadius", "0.5")
  44 model.addParameter(Part_1_doc, "Drill2_DepthMin", "6.5")
  45 model.addParameter(Part_1_doc, "Drill2_DepthMax", "7.5")
  46 model.addParameter(Part_1_doc, "Chamfer", "0.5")
  47 model.addParameter(Part_1_doc, "Fillet1", "5")
  48 model.addParameter(Part_1_doc, "Fillet2", "0.3")
  49 model.addParameter(Part_1_doc, "Fillet3", "0.5")
  50 model.addParameter(Part_1_doc, "Slot_Width", "8")
  51 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  52 SketchLine_1 = Sketch_1.addLine(0, 3, 0.5, 2.5)
  53 SketchLine_2 = Sketch_1.addLine(0.5, 2.5, 9.5, 2.5)
  54 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  55 SketchLine_3 = Sketch_1.addLine(9.5, 2.5, 9.5, 3.1)
  56 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  57 SketchLine_4 = Sketch_1.addLine(9.5, 3.1, 24.86574363608673, 3.1)
  58 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  59 SketchLine_5 = Sketch_1.addLine(24.86574363608673, 3.1, 26, 3.3)
  60 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  61 SketchLine_6 = Sketch_1.addLine(26, 3.3, 26, 5.5)
  62 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  63 SketchLine_7 = Sketch_1.addLine(31, 10.5, 64, 10.5)
  64 SketchLine_8 = Sketch_1.addLine(64, 10.5, 64, 15)
  65 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  66 SketchLine_9 = Sketch_1.addLine(64, 15, 61, 15)
  67 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  68 SketchLine_10 = Sketch_1.addLine(61, 15, 61, 12.75)
  69 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  70 SketchLine_11 = Sketch_1.addLine(61, 12.75, 58, 12.75)
  71 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  72 SketchLine_12 = Sketch_1.addLine(58, 12.75, 58, 14)
  73 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  74 SketchLine_13 = Sketch_1.addLine(58, 14, 57, 15)
  75 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  76 SketchLine_14 = Sketch_1.addLine(57, 15, 54, 15)
  77 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  78 SketchLine_15 = Sketch_1.addLine(54, 15, 52.5, 16.5)
  79 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
  80 SketchLine_16 = Sketch_1.addLine(52.5, 16.5, 35, 16.5)
  81 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
  82 SketchLine_17 = Sketch_1.addLine(35, 16.5, 34, 15.5)
  83 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
  84 SketchLine_18 = Sketch_1.addLine(34, 15.5, 32, 15.5)
  85 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
  86 SketchLine_19 = Sketch_1.addLine(32, 15.5, 32, 19)
  87 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
  88 SketchLine_20 = Sketch_1.addLine(32, 19, 22.5, 19)
  89 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
  90 SketchLine_21 = Sketch_1.addLine(22.5, 19, 22.5, 13)
  91 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
  92 SketchLine_22 = Sketch_1.addLine(22.5, 13, 22, 12.5)
  93 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
  94 SketchLine_23 = Sketch_1.addLine(22, 12.5, 22, 10)
  95 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
  96 SketchLine_24 = Sketch_1.addLine(22, 10, 20, 10)
  97 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
  98 SketchLine_25 = Sketch_1.addLine(20, 10, 20, 8.699999999999999)
  99 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint())
 100 SketchLine_26 = Sketch_1.addLine(20, 8.699999999999999, 18.5, 8.699999999999999)
 101 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_26.startPoint())
 102 SketchLine_27 = Sketch_1.addLine(18.5, 8.699999999999999, 18.5, 10)
 103 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_27.startPoint())
 104 SketchLine_28 = Sketch_1.addLine(18.5, 10, 10.5, 10)
 105 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_27.endPoint(), SketchLine_28.startPoint())
 106 SketchLine_29 = Sketch_1.addLine(10.5, 10, 10.5, 8.699999999999999)
 107 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
 108 SketchLine_30 = Sketch_1.addLine(10.5, 8.699999999999999, 9, 8.699999999999999)
 109 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
 110 SketchLine_31 = Sketch_1.addLine(9, 8.699999999999999, 9, 10)
 111 SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 112 SketchLine_32 = Sketch_1.addLine(9, 10, 0.5, 10)
 113 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchLine_32.startPoint())
 114 SketchLine_33 = Sketch_1.addLine(0.5, 10, 0, 9.5)
 115 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchLine_32.endPoint(), SketchLine_33.startPoint())
 116 SketchLine_34 = Sketch_1.addLine(0, 9.5, 0, 3)
 117 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_33.endPoint(), SketchLine_34.startPoint())
 118 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_34.endPoint())
 119 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
 120 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
 121 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
 122 SketchConstraintAngle_1 = Sketch_1.setAngleComplementary(SketchLine_4.result(), SketchLine_5.result(), 10.00000000008873)
 123 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_6.result())
 124 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_7.result())
 125 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
 126 SketchPoint_1 = SketchProjection_1.createdFeature()
 127 SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_1.endPoint(), "D2_in/2")
 128 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_8.result())
 129 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_9.result())
 130 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_16.result(), SketchLine_7.result())
 131 SketchConstraintAngle_2 = Sketch_1.setAngleComplementary(SketchLine_15.result(), SketchLine_16.result(), 45.00000000000006)
 132 SketchConstraintAngle_3 = Sketch_1.setAngleComplementary(SketchLine_13.result(), SketchLine_14.result(), 45.00000000000006)
 133 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_12.result())
 134 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_10.result())
 135 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_11.result())
 136 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_17.result(), SketchLine_15.result())
 137 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_19.result())
 138 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_18.result())
 139 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_20.result(), SketchLine_7.result())
 140 SketchConstraintParallel_3 = Sketch_1.setParallel(SketchLine_21.result(), SketchLine_19.result())
 141 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_23.result())
 142 SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_24.result())
 143 SketchConstraintCollinear_1 = Sketch_1.setCollinear(SketchLine_28.result(), SketchLine_24.result())
 144 SketchConstraintCollinear_2 = Sketch_1.setCollinear(SketchLine_32.result(), SketchLine_28.result())
 145 SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_34.result())
 146 SketchConstraintHorizontal_8 = Sketch_1.setHorizontal(SketchLine_30.result())
 147 SketchConstraintCollinear_3 = Sketch_1.setCollinear(SketchLine_26.result(), SketchLine_30.result())
 148 SketchConstraintVertical_9 = Sketch_1.setVertical(SketchLine_31.result())
 149 SketchConstraintVertical_10 = Sketch_1.setVertical(SketchLine_29.result())
 150 SketchConstraintVertical_11 = Sketch_1.setVertical(SketchLine_27.result())
 151 SketchConstraintVertical_12 = Sketch_1.setVertical(SketchLine_25.result())
 152 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_24.result(), "D4_out/2", True)
 153 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_30.result(), "D4_out/2-Channel_Depth", True)
 154 SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchLine_34.endPoint(), SketchLine_1.endPoint(), "Chamfer")
 155 SketchConstraintDistanceVertical_2 = Sketch_1.setVerticalDistance(SketchLine_1.endPoint(), SketchLine_1.startPoint(), "Chamfer")
 156 SketchConstraintDistanceHorizontal_2 = Sketch_1.setHorizontalDistance(SketchLine_34.startPoint(), SketchLine_33.startPoint(), "Chamfer")
 157 SketchConstraintDistanceVertical_3 = Sketch_1.setVerticalDistance(SketchLine_34.startPoint(), SketchLine_33.startPoint(), "Chamfer")
 158 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 159 SketchLine_35 = SketchProjection_2.createdFeature()
 160 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_35.result(), "D2_in/2+0.6", True)
 161 SketchConstraintDistanceHorizontal_3 = Sketch_1.setHorizontalDistance(SketchLine_3.endPoint(), SketchLine_5.endPoint(), "Depth/2")
 162 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_35.result(), "D2_in/2+0.8", True)
 163 SketchArc_1 = Sketch_1.addArc(31, 5.5, 31, 10.5, 26, 5.5, False)
 164 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_7.startPoint())
 165 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_6.endPoint())
 166 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_7.result())
 167 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_6.result())
 168 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "Fillet1")
 169 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_7.endPoint(), SketchLine_35.result(), "D1_in/2", True)
 170 SketchConstraintAngle_4 = Sketch_1.setAngleComplementary(SketchLine_23.result(), SketchLine_22.result(), 44.99999999999991)
 171 SketchConstraintCollinear_4 = Sketch_1.setCollinear(SketchLine_14.result(), SketchLine_9.result())
 172 SketchConstraintDistanceHorizontal_4 = Sketch_1.setHorizontalDistance(SketchLine_34.startPoint(), SketchLine_23.startPoint(), "Width/32*11")
 173 SketchConstraintDistanceHorizontal_5 = Sketch_1.setHorizontalDistance(SketchLine_23.startPoint(), SketchLine_22.startPoint(), "Chamfer")
 174 SketchConstraintDistanceHorizontal_6 = Sketch_1.setHorizontalDistance(SketchLine_15.startPoint(), SketchLine_8.endPoint(), 10)
 175 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_35.result(), "D3_out/2", True)
 176 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_11.startPoint(), SketchLine_35.result(), "(D3_out+D1_in)/4", True)
 177 SketchConstraintDistanceHorizontal_7 = Sketch_1.setHorizontalDistance(SketchLine_10.startPoint(), SketchLine_8.endPoint(), 3)
 178 SketchConstraintDistanceHorizontal_8 = Sketch_1.setHorizontalDistance(SketchLine_12.endPoint(), SketchLine_10.startPoint(), 3)
 179 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_30.result(), SketchLine_26.result())
 180 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_26.result(), "Channel_Width")
 181 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_28.result(), "Drill1Holder_Width")
 182 SketchConstraintDistanceHorizontal_9 = Sketch_1.setHorizontalDistance(SketchArc_1.center(), SketchLine_7.endPoint(), "Depth")
 183 SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_16.startPoint(), SketchLine_35.result(), "D2_out/2", True)
 184 SketchConstraintDistanceHorizontal_10 = Sketch_1.setHorizontalDistance(SketchLine_20.startPoint(), SketchLine_8.endPoint(), "Width/2")
 185 SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_17.endPoint(), SketchLine_35.result(), "D2_out/2-1", True)
 186 SketchConstraintDistanceHorizontal_11 = Sketch_1.setHorizontalDistance(SketchLine_20.startPoint(), SketchLine_17.endPoint(), 2)
 187 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_35).startPoint(), SketchLine_34.result())
 188 SketchConstraintDistance_10 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_35).startPoint(), SketchLine_20.result(), "D1_out/2", True)
 189 SketchPoint_2 = Sketch_1.addPoint(14.5, 10)
 190 SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_28.result())
 191 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_28.result())
 192 SketchConstraintDistanceHorizontal_12 = Sketch_1.setHorizontalDistance(SketchPoint_2.coordinates(), SketchLine_24.startPoint(), "Drill1_Loc")
 193 SketchConstraintDistanceHorizontal_13 = Sketch_1.setHorizontalDistance(SketchLine_34.startPoint(), SketchLine_9.startPoint(), "Width")
 194 SketchConstraintDistanceHorizontal_14 = Sketch_1.setHorizontalDistance(SketchLine_14.startPoint(), SketchLine_12.endPoint(), 1)
 195 SketchConstraintDistance_11 = Sketch_1.setDistance(SketchLine_23.startPoint(), SketchLine_35.result(), "(D4_out+D2_in)/2", True)
 196 model.do()
 197 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection("EDGE", "PartSet/OX"), 360, 0)
 198 Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "PartSet/OY"), model.selection("VERTEX", "Sketch_1/SketchPoint_2"), True)
 199 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 200 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchPoint_2"), False)
 201 SketchPoint_3 = SketchProjection_3.createdFeature()
 202 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "([Revolution_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7])([Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_8])"), False)
 203 SketchLine_36 = SketchProjection_4.createdFeature()
 204 SketchCircle_1 = Sketch_2.addCircle(14.5, 0, 2.25)
 205 SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchPoint_3.result(), SketchCircle_1.center())
 206 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_1.results()[1], "Drill1_Radius")
 207 model.do()
 208 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "PartSet/XOZ"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 209 Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_21][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_20]")], "Fillet1")
 210 Fillet_2_objects = [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_31"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_29"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_27"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_25")]
 211 Fillet_2 = model.addFillet(Part_1_doc, Fillet_2_objects, "Fillet2")
 212 model.do()
 213
 214 # update a parameter Width value to 80 and check that result is correct
 215 WidthParam.setValue(80)
 216 model.do()
 217
 218 import ModelAPI
 219 assert(ModelAPI.ModelAPI_Session.get().validators().validate(Fillet_2.feature()))
 220
 221 from GeomAPI import *
 222 model.testHaveNamingByType(Fillet_2, model, Part_1_doc, GeomAPI_Shape.FACE)
 223
 224 model.end()
 225
 226 assert(model.checkPythonDump())