src/ModelAPI/Test/Test2358_2.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 model.addParameter(Part_1_doc, "h", "100")
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(0, 0, 0, 50)
  29 SketchLine_2 = Sketch_1.addLine(0, 50, 50, 50)
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  31 SketchLine_3 = Sketch_1.addLine(50, 50, 50, 0)
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  33 SketchLine_4 = Sketch_1.addLine(50, 0, 0, 0)
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  36 SketchConstraintRigid_1 = Sketch_1.setFixed(SketchLine_1.startPoint())
  37 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  38 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), 50)
  39 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 50)
  40 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_1.result(), SketchLine_3.result())
  41 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_4.result())
  42 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_4.result())
  43 model.do()
  44 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 50, 0)
  45 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
  46 SketchLine_5 = Sketch_2.addLine(10, 21.9014765990379, 0, 21.9014765990379)
  47 SketchLine_5.setName("SketchLine_9")
  48 SketchLine_5.result().setName("SketchLine_9")
  49 SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
  50 SketchLine_6 = SketchProjection_1.createdFeature()
  51 SketchLine_6.setName("SketchLine_10")
  52 SketchLine_6.result().setName("SketchLine_10")
  53 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
  54 SketchLine_7 = Sketch_2.addLine(0, 21.9014765990379, 0, 31.9014765990379)
  55 SketchLine_7.setName("SketchLine_11")
  56 SketchLine_7.result().setName("SketchLine_11")
  57 SketchLine_8 = Sketch_2.addLine(0, 31.9014765990379, 10, 31.9014765990379)
  58 SketchLine_8.setName("SketchLine_12")
  59 SketchLine_8.result().setName("SketchLine_12")
  60 SketchLine_9 = Sketch_2.addLine(10, 31.9014765990379, 10, 21.9014765990379)
  61 SketchLine_9.setName("SketchLine_13")
  62 SketchLine_9.result().setName("SketchLine_13")
  63 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_5.startPoint())
  64 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
  65 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  66 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  67 SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_5.result())
  68 SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_7.result())
  69 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_8.result())
  70 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_9.result())
  71 SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_9.result(), 10)
  72 SketchConstraintLength_4 = Sketch_2.setLength(SketchLine_8.result(), 10)
  73 model.do()
  74 Sketch_2.setName("Sketch_3")
  75 Sketch_2.result().setName("Sketch_3")
  76 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchLine_13r-SketchLine_12r-SketchLine_11r-SketchLine_9r_wire")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
  77 Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  78 SketchLine_10 = Sketch_3.addLine(29.60939424565112, 0, 19.60939424565112, 0)
  79 SketchLine_10.setName("SketchLine_14")
  80 SketchLine_10.result().setName("SketchLine_14")
  81 SketchProjection_2 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False)
  82 SketchLine_11 = SketchProjection_2.createdFeature()
  83 SketchLine_11.setName("SketchLine_15")
  84 SketchLine_11.result().setName("SketchLine_15")
  85 SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.result())
  86 SketchLine_12 = Sketch_3.addLine(19.60939424565112, 0, 19.60939424565112, 5)
  87 SketchLine_12.setName("SketchLine_16")
  88 SketchLine_12.result().setName("SketchLine_16")
  89 SketchLine_13 = Sketch_3.addLine(19.60939424565112, 5, 29.60939424565112, 5)
  90 SketchLine_13.setName("SketchLine_17")
  91 SketchLine_13.result().setName("SketchLine_17")
  92 SketchLine_14 = Sketch_3.addLine(29.60939424565112, 5, 29.60939424565112, 0)
  93 SketchLine_14.setName("SketchLine_18")
  94 SketchLine_14.result().setName("SketchLine_18")
  95 SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchLine_10.startPoint())
  96 SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_12.startPoint())
  97 SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  98 SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  99 SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_10.result())
 100 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_12.result())
 101 SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_13.result())
 102 SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_14.result())
 103 SketchConstraintLength_5 = Sketch_3.setLength(SketchLine_12.result(), 5)
 104 SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_13.result(), 10)
 105 model.do()
 106 Sketch_3.setName("Sketch_4")
 107 Sketch_3.result().setName("Sketch_4")
 108 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), "h", 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 109 Fillet_1_objects = [model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face][(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_12)(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face)]"), model.selection("EDGE", "[(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_12)(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face)][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face]"), model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face]"), model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2]"), model.selection("EDGE", "[(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_9)(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3)][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face]"), model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_9)(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1)]"), model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3]"), model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1]"), model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face]"), model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face]"), model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3][(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_12)(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face)]"), model.selection("EDGE", "[(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_9)(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3)][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3]"), model.selection("EDGE", "[(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_9)(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1)][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1]"), model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1][(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_12)(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face)]"), model.selection("EDGE", "[(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_1)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_12)(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face)][ExtrusionCut_2_1/Generated_Face&Sketch_4/SketchLine_16&weak_name_2]"), model.selection("EDGE", "[(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_3)(ExtrusionCut_2_1/Modified_Face&Sketch_3/SketchLine_12)(ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face)][ExtrusionCut_2_1/Generated_Face&Sketch_4/SketchLine_18&weak_name_2]")]
 110 Fillet_1 = model.addFillet(Part_1_doc, Fillet_1_objects, 2)
 111 Group_1_objects = [
 112 model.selection("FACE", "(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_14)(Fillet_1_1/MF:Fillet_Face&Sketch_3/SketchLine_12)(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_15)(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_1)"),
 113 model.selection("FACE", "(Fillet_1_1/MF:Fillet_Face&Sketch_3/SketchLine_12)(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_11)(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_16)(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_2)"),
 114 model.selection("FACE", "(Fillet_1_1/MF:Fillet_Face&Sketch_3/SketchLine_9)(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_13)(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_6)"),
 115 model.selection("FACE", "(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_5)(Fillet_1_1/MF:Fillet_Face&Sketch_3/SketchLine_9)(Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_12)")
 116 ]
 117 Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
 118 Group_2 = model.addGroup(Part_1_doc, [model.selection("EDGE", "[Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_9][Fillet_1_1/MF:Fillet_Face&Extrusion_1_1/To_Face]"), model.selection("EDGE", "[Fillet_1_1/MF:Fillet_Face&Sketch_1/SketchLine_3][Fillet_1_1/GF:Fillet&Fillet_1_1/FilletSelected_9]")])
 119 Group_3 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "[Fillet_1_1/MF:Fillet_Face&Sketch_3/SketchLine_9][ExtrusionCut_1_1/Generated_Face&Sketch_3/SketchLine_13][Fillet_1_1/MF:Fillet_Face&Sketch_1/SketchLine_3]"), model.selection("VERTEX", "[ExtrusionCut_1_1/Generated_Face&Sketch_3/SketchLine_13][Fillet_1_1/MF:Fillet_Face&Sketch_1/SketchLine_3][Fillet_1_1/MF:Fillet_Face&Sketch_3/SketchLine_12]")])
 120 model.do()
 121
 122 Folder_1 = model.addFolder(Part_1_doc, Sketch_3, ExtrusionCut_2)
 123 Folder_1.setName("Box")
 124 Folder_2 = model.addFolder(Part_1_doc, Group_1, Group_2)
 125 Folder_2.setName("Groups")
 126
 127 from GeomAPI import GeomAPI_Shape
 128
 129 # check result shape
 130 model.testNbResults(Fillet_1, 1)
 131 model.testNbSubResults(Fillet_1, [0])
 132 model.testNbSubShapes(Fillet_1, GeomAPI_Shape.SOLID, [1])
 133 model.testNbSubShapes(Fillet_1, GeomAPI_Shape.FACE, [38])
 134 model.testNbSubShapes(Fillet_1, GeomAPI_Shape.EDGE, [184])
 135 model.testNbSubShapes(Fillet_1, GeomAPI_Shape.VERTEX, [368])
 136 model.testResultsVolumes(Fillet_1, [117584.019523708775523118674755096])
 137 # check groups
 138 model.checkGroup(Group_1, GeomAPI_Shape.FACE)
 139 model.checkGroup(Group_2, GeomAPI_Shape.EDGE)
 140 model.checkGroup(Group_3, GeomAPI_Shape.VERTEX)
 141
 142 model.end()
 143
 144 assert(model.checkPythonDump())