src/ModelAPI/Test/Test2358_1.py

   1 ## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(0, 0, 0, 50)
  29 SketchLine_2 = Sketch_1.addLine(0, 50, 50, 50)
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  31 SketchLine_3 = Sketch_1.addLine(50, 50, 50, 0)
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  33 SketchLine_4 = Sketch_1.addLine(50, 0, 0, 0)
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  35 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  36 SketchConstraintRigid_1 = Sketch_1.setFixed(SketchLine_1.startPoint())
  37 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  38 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), 50)
  39 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 50)
  40 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_1.result(), SketchLine_3.result())
  41 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_4.result())
  42 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_4.result())
  43 model.do()
  44 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r")], model.selection(), 50, 0)
  45 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  46 SketchCircle_1 = Sketch_2.addCircle(26.06240015364781, 18.07716886601709, 12.23427461205297)
  47 model.do()
  48 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0, model.selection(), 0)
  49 Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
  50 model.do()
  51
  52 Folder_1 = model.addFolder(Part_1_doc, Sketch_1, Extrusion_1)
  53 Folder_1.setName("Box")
  54 Folder_2 = model.addFolder(Part_1_doc, Sketch_2, Extrusion_2)
  55 Folder_2.setName("Cylinder")
  56
  57 from GeomAPI import GeomAPI_Shape
  58
  59 # check result shape
  60 model.testNbResults(Boolean_1, 1)
  61 model.testNbSubResults(Boolean_1, [0])
  62 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.SOLID, [1])
  63 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.FACE, [7])
  64 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.EDGE, [30])
  65 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.VERTEX, [60])
  66 model.testResultsVolumes(Boolean_1, [101488.717162133529200218617916107])
  67
  68 model.end()
  69
  70 assert(model.checkPythonDump())