src/ModelAPI/Test/Test2358_1.py

   1 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # -*- coding: utf-8 -*-
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(0, 0, 0, 50)
  30 SketchLine_2 = Sketch_1.addLine(0, 50, 50, 50)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  32 SketchLine_3 = Sketch_1.addLine(50, 50, 50, 0)
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  34 SketchLine_4 = Sketch_1.addLine(50, 0, 0, 0)
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  37 SketchConstraintRigid_1 = Sketch_1.setFixed(SketchLine_1.startPoint())
  38 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  39 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), 50)
  40 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 50)
  41 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_1.result(), SketchLine_3.result())
  42 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_4.result())
  43 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_4.result())
  44 model.do()
  45 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 50, 0)
  46 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
  47 SketchCircle_1 = Sketch_2.addCircle(26.06240015364781, 18.07716886601709, 12.23427461205297)
  48 model.do()
  49 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face"), 0, model.selection(), 0)
  50 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
  51 model.do()
  52
  53 Folder_1 = model.addFolder(Part_1_doc, Sketch_1, Extrusion_1)
  54 Folder_1.setName("Box")
  55 Folder_2 = model.addFolder(Part_1_doc, Sketch_2, Extrusion_2)
  56 Folder_2.setName("Cylinder")
  57
  58 from GeomAPI import GeomAPI_Shape
  59
  60 # check result shape
  61 model.testNbResults(Cut_1, 1)
  62 model.testNbSubResults(Cut_1, [0])
  63 model.testNbSubShapes(Cut_1, GeomAPI_Shape.SOLID, [1])
  64 model.testNbSubShapes(Cut_1, GeomAPI_Shape.FACE, [7])
  65 model.testNbSubShapes(Cut_1, GeomAPI_Shape.EDGE, [30])
  66 model.testNbSubShapes(Cut_1, GeomAPI_Shape.VERTEX, [60])
  67 model.testResultsVolumes(Cut_1, [101488.717162133529200218617916107])
  68
  69 model.end()
  70
  71 assert(model.checkPythonDump())