src/ModelAPI/Test/Test2241.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 model.addParameter(Part_1_doc, "l", "10")
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(0, 60, 10, 60)
  30 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  32 SketchLine_3 = Sketch_1.addLine(10, 60, 10, 40)
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  34 SketchLine_4 = Sketch_1.addLine(10, 40, 20, 40)
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchLine_5 = Sketch_1.addLine(20, 40, 20, 20)
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  38 SketchLine_6 = Sketch_1.addLine(20, 20, 30, 20)
  39 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  40 SketchLine_7 = Sketch_1.addLine(30, 20, 30, 0)
  41 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  42 SketchLine_8 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  43 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
  44 SketchLine_9 = Sketch_1.addLine(30, 0, 81.26217508737108, 0)
  45 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_9.startPoint())
  46 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_8.result())
  47 SketchLine_10 = Sketch_1.addLine(0, 60, 0, 81.26217508737108)
  48 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.startPoint())
  49 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_2.result())
  50 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  51 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
  52 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
  53 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  54 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  55 SketchArc_1 = Sketch_1.addArc(4.151438510550382e-034, -3.089278765476956e-034, 81.26217508737108, 0, 0, 81.26217508737108, False)
  56 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_1.center())
  57 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_1.startPoint())
  58 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_1.endPoint())
  59 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_1.endPoint())
  60 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
  61 SketchArc_2 = Sketch_1.addArc(4.151438510550382e-034, -3.089278765476956e-034, 76.26217508737108, 0, 0, 76.26217508737108, False)
  62 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchArc_2.center())
  63 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_23")
  64 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.result(), SketchArc_2.startPoint())
  65 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_24")
  66 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_10.result(), SketchArc_2.endPoint())
  67 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_25")
  68 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchArc_2.endPoint(), 5)
  69 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "2*l")
  70 SketchConstraintLength_1.setName("SketchConstraintLength_2")
  71 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_6.result(), "l")
  72 SketchConstraintLength_2.setName("SketchConstraintLength_3")
  73 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_7.result())
  74 SketchConstraintEqual_1.setName("SketchConstraintEqual_2")
  75 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_4.result())
  76 SketchConstraintEqual_2.setName("SketchConstraintEqual_3")
  77 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_3.result())
  78 SketchConstraintEqual_3.setName("SketchConstraintEqual_4")
  79 SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_1.result())
  80 SketchConstraintEqual_4.setName("SketchConstraintEqual_5")
  81 model.do()
  82 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  83 SketchCircle_1 = Sketch_2.addCircle(9.082839147404137, 71.32948234489588, 2.005056553640547)
  84 SketchCircle_2 = Sketch_2.addCircle(20.11065019242717, 63.7102674410618, 2.268462537186828)
  85 SketchCircle_3 = Sketch_2.addCircle(26.52683116407693, 51.67992811921848, 2.727171758268866)
  86 SketchCircle_4 = Sketch_2.addCircle(38.35666483055617, 58.29661474623231, 3.007584830460834)
  87 SketchCircle_5 = Sketch_2.addCircle(33.94554041254697, 44.0607132153844, 3.054011155390377)
  88 SketchCircle_6 = Sketch_2.addCircle(48.58245325412298, 42.45666797247195, 2.346858526438435)
  89 SketchCircle_7 = Sketch_2.addCircle(38.95818179664835, 31.42885692744893, 3.547307159201095)
  90 SketchCircle_8 = Sketch_2.addCircle(63.82088306179116, 27.41874382016783, 4.536925074373651)
  91 SketchCircle_9 = Sketch_2.addCircle(50.18649849703544, 28.4212720969881, 4.820482891521984)
  92 SketchCircle_10 = Sketch_2.addCircle(49.58498153094326, 15.18789884296047, 2.552020354335177)
  93 SketchCircle_11 = Sketch_2.addCircle(66.22695092615982, 10.77677442495125, 4.536925074373645)
  94 SketchCircle_12 = Sketch_2.addCircle(50.98852111849166, 6.165144351577979, 3.547307159201085)
  95 model.do()
  96 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")])
  97 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_9f-SketchLine_10r-SketchArc_1_2f-SketchArc_2_2r")])
  98 Face_3 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_2_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_5_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_6_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_7_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_9_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_8_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_10_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_12_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_11_2")])
  99 Face_4 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_2_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_5_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_7_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_6_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_9_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_8_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_10_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_12_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_11_2"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")])
 100 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 101 SketchLine_11 = Sketch_3.addLine(40, 0, 30, 0)
 102 SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "Face_1_1/Edge_6&Face_1_1/Edge_7"))
 103 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
 104 SketchLine_12 = Sketch_3.addLine(30, 0, 30, 10)
 105 SketchLine_13 = Sketch_3.addLine(30, 10, 40, 10)
 106 SketchLine_14 = Sketch_3.addLine(40, 10, 40, 0)
 107 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
 108 SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
 109 SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
 110 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 111 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_26")
 112 SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_11.result())
 113 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_12.result())
 114 SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_13.result())
 115 SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_14.result())
 116 SketchConstraintEqual_5 = Sketch_3.setEqual(SketchLine_14.result(), SketchLine_13.result())
 117 SketchConstraintEqual_5.setName("SketchConstraintEqual_6")
 118 SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_13.result(), "l")
 119 SketchConstraintLength_3.setName("SketchConstraintLength_4")
 120 model.do()
 121 Face_5 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_14r")])
 122 MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "PartSet/OX"), "l", 4, model.selection("EDGE", "PartSet/OY"), "l", 2)
 123 Recover_1 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 124 Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_1_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"))
 125 MultiTranslation_2 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_1_1")], model.selection("EDGE", "PartSet/OX"), "l", 4, model.selection("EDGE", "PartSet/OY"), "l", 2)
 126 Recover_2 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 127 Translation_2 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_2_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_2&Face_4_1/Edge_3"))
 128 MultiTranslation_3 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_2_1")], model.selection("EDGE", "PartSet/OX"), "l", 4)
 129 Recover_3 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 130 Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "LinearCopy_3_1/Translated_Edge_1_4&LinearCopy_3_1/Translated_Edge_1_3"))
 131 MultiTranslation_4 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_3_1")], model.selection("EDGE", "PartSet/OX"), "l", 3)
 132 Recover_4 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
 133 Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_1&Face_4_1/Edge_9"))
 134 MultiTranslation_5 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_4_1")], model.selection("EDGE", "PartSet/OX"), "l", 2)
 135 Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "LinearCopy_4_1_2"), model.selection("FACE", "LinearCopy_1_1_8"), model.selection("FACE", "LinearCopy_1_1_4"), model.selection("FACE", "LinearCopy_1_1_3"), model.selection("FACE", "LinearCopy_1_1_6"), model.selection("FACE", "LinearCopy_1_1_2"), model.selection("FACE", "LinearCopy_1_1_7"), model.selection("FACE", "LinearCopy_2_1_3"), model.selection("FACE", "LinearCopy_3_1_4"), model.selection("FACE", "LinearCopy_2_1_8"), model.selection("FACE", "LinearCopy_2_1_4"), model.selection("FACE", "LinearCopy_2_1_7"), model.selection("FACE", "LinearCopy_4_1_3"), model.selection("FACE", "LinearCopy_1_1_1"), model.selection("FACE", "LinearCopy_5_1_2"), model.selection("FACE", "LinearCopy_4_1_1"), model.selection("FACE", "LinearCopy_5_1_1"), model.selection("FACE", "LinearCopy_3_1_3"), model.selection("FACE", "LinearCopy_3_1_2"), model.selection("FACE", "LinearCopy_3_1_1"), model.selection("FACE", "LinearCopy_2_1_6"), model.selection("FACE", "LinearCopy_2_1_2"), model.selection("FACE", "LinearCopy_2_1_5"), model.selection("FACE", "LinearCopy_2_1_1"), model.selection("FACE", "LinearCopy_1_1_5")])
 136 Group_1.setName("Group_3")
 137 Group_1.result().setName("assemblages")
 138 Group_2 = model.addGroup(Part_1_doc, [model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_12")])
 139 Group_2.setName("Group_1")
 140 Group_2.result().setName("eau")
 141 Group_2.result().setColor(0, 170, 255)
 142 Group_3 = model.addGroup(Part_1_doc, [model.selection("FACE", "Face_4_1")])
 143 Group_3.setName("Group_2")
 144 Group_3.result().setName("acier")
 145 Group_3.result().setColor(170, 85, 0)
 146 Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "LinearCopy_1_1_1"), model.selection("FACE", "LinearCopy_1_1_2"), model.selection("FACE", "LinearCopy_1_1_3"), model.selection("FACE", "LinearCopy_1_1_4"), model.selection("FACE", "LinearCopy_1_1_5"), model.selection("FACE", "LinearCopy_1_1_6"), model.selection("FACE", "LinearCopy_1_1_7"), model.selection("FACE", "LinearCopy_2_1_4"), model.selection("FACE", "LinearCopy_2_1_5"), model.selection("FACE", "LinearCopy_2_1_6"), model.selection("FACE", "LinearCopy_2_1_7"), model.selection("FACE", "LinearCopy_2_1_8"), model.selection("FACE", "LinearCopy_2_1_1"), model.selection("FACE", "LinearCopy_2_1_2"), model.selection("FACE", "LinearCopy_2_1_3"), model.selection("FACE", "LinearCopy_3_1_4"), model.selection("FACE", "LinearCopy_3_1_3"), model.selection("FACE", "LinearCopy_3_1_2"), model.selection("FACE", "LinearCopy_3_1_1"), model.selection("FACE", "LinearCopy_4_1_1"), model.selection("FACE", "LinearCopy_4_1_2"), model.selection("FACE", "LinearCopy_4_1_3"), model.selection("FACE", "LinearCopy_5_1_1"), model.selection("FACE", "LinearCopy_5_1_2"), model.selection("FACE", "LinearCopy_1_1_8")])
 147 Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_3_2"), model.selection("FACE", "Face_4_1"), model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_3_5"), model.selection("FACE", "Face_3_3"), model.selection("FACE", "Face_3_4"), model.selection("FACE", "Face_3_7"), model.selection("FACE", "Face_3_6"), model.selection("FACE", "Face_3_8"), model.selection("FACE", "Face_3_9"), model.selection("FACE", "Face_3_10"), model.selection("FACE", "Face_3_11"), model.selection("FACE", "Face_3_12"), model.selection("SHELL", "Shell_1_1")])
 148 model.end()
 149
 150 # move groups
 151 model.begin()
 152 Part_1_doc.moveFeature(Group_1.feature(), Partition_1.feature())
 153 Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
 154 Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
 155 model.end()
 156
 157 # check that all groups are correct
 158 from ModelAPI import *
 159 aFactory = ModelAPI_Session.get().validators()
 160
 161 for Group in [Group_1, Group_2, Group_3]:
 162   assert(aFactory.validate(Group.feature()))
 163   assert(Group.groupList().size() != 0)
 164   for a in range(Group.groupList().size()):
 165     assert(Group.groupList().value(a).value().shapeTypeStr() == "FACE")
 166     assert(len(Group.groupList().value(a).namingName()) > 0)