src/ModelAPI/Test/Test1562.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 lenParam = model.addParameter(Part_1_doc, "len", "45")
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(63.23267137124048, -31.30105453337777, -32.56343706523536, -31.30105453337777)
  30 SketchLine_2 = Sketch_1.addLine(-32.56343706523536, -31.30105453337777, -32.56343706523536, -163.6364723017416)
  31 SketchLine_3 = Sketch_1.addLine(-32.56343706523536, -163.6364723017416, 63.23267137124048, -163.6364723017416)
  32 SketchLine_4 = Sketch_1.addLine(63.23267137124048, -163.6364723017416, 63.23267137124048, -31.30105453337777)
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  37 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  38 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  39 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  40 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  41 model.do()
  42 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 50, 0)
  43 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"))
  44 SketchLine_5 = Sketch_2.addLine(43.23267137124047, 69.97394590606471, -1.767328628759523, 69.97394590606471)
  45 SketchLine_6 = Sketch_2.addLine(-1.767328628759523, 69.97394590606471, -1.767328628759523, 20.8583125692591)
  46 SketchLine_7 = Sketch_2.addLine(-1.767328628759523, 20.8583125692591, 43.23267137124047, 20.8583125692591)
  47 SketchLine_8 = Sketch_2.addLine(43.23267137124047, 20.8583125692591, 43.23267137124047, 69.97394590606471)
  48 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  49 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  50 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  51 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  52 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  53 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  54 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  55 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  56 SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4]"), False)
  57 SketchLine_9 = SketchProjection_1.createdFeature()
  58 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchLine_9.result(), SketchLine_7.endPoint(), 20, True)
  59 SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_7.result(), "len")
  60 model.do()
  61 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_5r-SketchLine_6f-SketchLine_7f-SketchLine_8f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
  62 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2"), 0, model.selection("FACE", "ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchLine_8"), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
  63 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchLine_8"))
  64 SketchCircle_1 = Sketch_3.addCircle(-89.76476373103716, -34.76230113958862, 5.223553090716001)
  65 ExtrusionCut_2.setNestedSketch(Sketch_3)
  66 model.do()
  67 # on increase of parameter selected part of extrusion is increased and selected face is removed (U becomes L)
  68 # so, check that selection is still correct and cut from not existing part produces correct shape anyway
  69 lenParam.setValue(100)
  70 model.end()
  71
  72 # check the result validity
  73 from ModelAPI import *
  74 aFactory = ModelAPI_Session.get().validators()
  75 assert(aFactory.validate(ExtrusionCut_2.feature()))
  76
  77 assert(model.checkPythonDump())