src/HYDROGUI/resources/HYDROGUI_msg_en.ts

   1 <!DOCTYPE TS>
   2 <TS version="1.1" >
   3
   4   <context>
   5     <name>@default</name>
   6     <message>
   7       <source>RENAME_TO</source>
   8       <translation>Rename to %1</translation>
   9     </message>
  10     <message>
  11       <source>DEFAULT_IMAGE_NAME</source>
  12       <translation>Image</translation>
  13     </message>
  14     <message>
  15       <source>DEFAULT_POLYLINE_NAME</source>
  16       <translation>Polyline</translation>
  17     </message>
  18     <message>
  19       <source>DEFAULT_OBSTACLE_NAME</source>
  20       <translation>Obstacle</translation>
  21     </message>
  22     <message>
  23       <source>DEFAULT_POLYLINE_3D_NAME</source>
  24       <translation>Polyline3D</translation>
  25     </message>
  26     <message>
  27       <source>DEFAULT_PROFILE_NAME</source>
  28       <translation>Profile</translation>
  29     </message>
  30     <message>
  31       <source>DEFAULT_VISUAL_STATE_NAME</source>
  32       <translation>Visual state</translation>
  33     </message>
  34     <message>
  35       <source>DEFAULT_BATHYMETRY_NAME</source>
  36       <translation>Bathymetry</translation>
  37     </message>
  38     <message>
  39       <source>DEFAULT_CALCULATION_CASE_NAME</source>
  40       <translation>Case</translation>
  41     </message>
  42     <message>
  43       <source>DEFAULT_IMMERSIBLE_ZONE_NAME</source>
  44       <translation>Immersible zone</translation>
  45     </message>
  46     <message>
  47       <source>DEFAULT_STRICKLER_TABLE_NAME</source>
  48       <translation>Strickler table</translation>
  49     </message>
  50     <message>
  51       <source>DEFAULT_LAND_COVER_NAME</source>
  52       <translation>Land cover</translation>
  53     </message>
  54     <message>
  55       <source>IMAGES</source>
  56       <translation>IMAGES</translation>
  57     </message>
  58     <message>
  59       <source>POLYLINES</source>
  60       <translation>POLYLINES</translation>
  61     </message>
  62     <message>
  63       <source>POLYLINES_3D</source>
  64       <translation>POLYLINES 3D</translation>
  65     </message>
  66     <message>
  67       <source>PROFILES</source>
  68       <translation>PROFILES</translation>
  69     </message>
  70     <message>
  71       <source>VISUAL_STATES</source>
  72       <translation>VISUAL STATES</translation>
  73     </message>
  74     <message>
  75       <source>BATHYMETRIES</source>
  76       <translation>BATHYMETRIES</translation>
  77     </message>
  78     <message>
  79       <source>CALCULATION_CASES</source>
  80       <translation>CALCULATION CASES</translation>
  81     </message>
  82     <message>
  83       <source>OBSTACLES</source>
  84       <translation>OBSTACLES</translation>
  85     </message>
  86     <message>
  87       <source>STRICKLER_TABLES</source>
  88       <translation>STRICKLER TABLES</translation>
  89     </message>
  90     <message>
  91       <source>LAND_COVERS</source>
  92       <translation>LAND COVERS</translation>
  93     </message>
  94     <message>
  95       <source>ARTIFICIAL_OBJECTS</source>
  96       <translation>ARTIFICIAL OBJECTS</translation>
  97     </message>
  98     <message>
  99       <source>NATURAL_OBJECTS</source>
 100       <translation>NATURAL OBJECTS</translation>
 101     </message>
 102     <message>
 103       <source>BATHYMETRY_FILTER</source>
 104       <translation>Bathymetry files (*.xyz);;ASC files (*.asc);;All files (*.* *)</translation>
 105     </message>
 106     <message>
 107       <source>CASE_BOUNDARY</source>
 108       <translation>Boundary</translation>
 109     </message>
 110     <message>
 111       <source>CASE_REFERENCE_ZONES</source>
 112       <translation>Reference zones</translation>
 113     </message>
 114     <message>
 115       <source>CASE_REGIONS</source>
 116       <translation>REGIONS</translation>
 117     </message>
 118     <message>
 119       <source>CASE_SPLITTED_GROUPS</source>
 120       <translation>Split groups</translation>
 121     </message>
 122     <message>
 123       <source>FILE_CAN_NOT_BE_IMPORTED</source>
 124       <translation>The file '%1' can not be imported: format *.%2 is not supported.</translation>
 125     </message>
 126     <message>
 127       <source>FILE_NOT_EXISTS_OR_CANT_BE_READ</source>
 128       <translation>The file '%1'
 129 does not exist or you have not enough permissions to open it.</translation>
 130     </message>
 131     <message>
 132       <source>IMAGE_FILTER</source>
 133       <translation>Image files (*.bmp *.jpg *.jpeg *.png *.tif);;All files (*.* *)</translation>
 134     </message>
 135     <message>
 136       <source>INCORRECT_OBJECT_NAME</source>
 137       <translation>The object name must not be an empty string value.</translation>
 138     </message>
 139     <message>
 140       <source>INCORRECT_FILE_NAME</source>
 141       <translation>The file name must not be an empty string value.</translation>
 142     </message>
 143     <message>
 144       <source>INSUFFICIENT_INPUT_DATA</source>
 145       <translation>Insufficient input data</translation>
 146     </message>
 147     <message>
 148       <source>INPUT_VALID_DATA</source>
 149       <translation>Please enter valid data and try again.</translation>
 150     </message>
 151     <message>
 152       <source>LOAD_ERROR</source>
 153       <translation>Study could not be loaded</translation>
 154     </message>
 155     <message>
 156       <source>SHAPE_IMAGE_ERROR</source>
 157       <translation>Image shape could not be created</translation>
 158     </message>
 159     <message>
 160       <source>IMAGE_CAN_NOT_BE_CREATED</source>
 161       <translation>It is not possible to create a presentation for OCC 3D view. </translation>
 162     </message>
 163     <message>
 164       <source>IMAGE_TRANSFORMATION_CAN_NOT_BE_APPLYED</source>
 165       <translation>The transformated image is out of range.</translation>
 166     </message>
 167     <message>
 168       <source>FILE_CAN_NOT_BE_CREATED</source>
 169       <translation>The temporary file '%1' can not be created.</translation>
 170     </message>
 171     <message>
 172       <source>OBJECT_EXISTS_IN_DOCUMENT</source>
 173       <translation>Object with name '%1' already exists in the document.</translation>
 174     </message>
 175     <message>
 176       <source>SAVE_ERROR</source>
 177       <translation>Study could not be saved</translation>
 178     </message>
 179     <message>
 180       <source>ZONE_POLYLINE</source>
 181       <translation>Polyline</translation>
 182     </message>
 183     <message>
 184       <source>ZONE_BATHYMETRY</source>
 185       <translation>Bathymetry</translation>
 186     </message>
 187     <message>
 188       <source>OBJECT_GROUPS</source>
 189       <translation>Groups</translation>
 190     </message>
 191     <message>
 192       <source>MERGE_UNKNOWN</source>
 193       <translation>Unresolved Conflict</translation>
 194     </message>
 195     <message>
 196       <source>MERGE_ZMIN</source>
 197       <translation>ZMIN</translation>
 198     </message>
 199     <message>
 200       <source>MERGE_ZMAX</source>
 201       <translation>ZMAX</translation>
 202     </message>
 203     <message>
 204       <source>NEW_REGION</source>
 205       <translation>&lt;New region&gt;</translation>
 206     </message>
 207     <message>
 208       <source>OBSTACLE_FILTER</source>
 209       <translation>BREP files (*.brep);;IGES files (*.iges *.igs);;STEP files (*.step *.stp);;
 210 All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
 211     </message>
 212     <message>
 213       <source>COORDINATES_INFO</source>
 214       <translation>Local CS: (%1, %2); Global CS: (%3, %4)</translation>
 215     </message>
 216     <message>
 217       <source>POLYLINE3D_POLYLINE</source>
 218       <translation>Polyline</translation>
 219     </message>
 220     <message>
 221       <source>POLYLINE3D_PROFILE</source>
 222       <translation>Profile</translation>
 223     </message>
 224     <message>
 225       <source>POLYLINE3D_BATHYMETRY</source>
 226       <translation>Bathymetry</translation>
 227     </message>
 228     <message>
 229       <source>CHANNEL_GUIDE_LINE</source>
 230       <translation>Guide line</translation>
 231     </message>
 232     <message>
 233       <source>CHANNEL_PROFILE</source>
 234       <translation>Profile</translation>
 235     </message>
 236     <message>
 237       <source>STREAM_HYDRAULIC_AXIS</source>
 238       <translation>Hydraulic axis</translation>
 239     </message>
 240     <message>
 241       <source>STREAM_PROFILES</source>
 242       <translation>Profiles</translation>
 243     </message>
 244     <message>
 245       <source>PREF_TAB_GENERAL</source>
 246       <translation>General</translation>
 247     </message>
 248     <message>
 249       <source>PREF_GROUP_CURSOR</source>
 250       <translation>Cursor for edition operations</translation>
 251     </message>
 252     <message>
 253       <source>PREF_TYPE_OF_CURSOR</source>
 254       <translation>Type</translation>
 255     </message>
 256     <message>
 257       <source>PREF_GROUP_VIEWER</source>
 258       <translation>Viewer</translation>
 259     </message>
 260     <message>
 261       <source>PREF_VIEWER_AUTO_FITALL</source>
 262       <translation>Make automatic fit all after show object operation</translation>
 263     </message>
 264     <message>
 265       <source>PREF_GROUP_STRICKLER_TABLE</source>
 266       <translation>Strickler table</translation>
 267     </message>
 268     <message>
 269       <source>PREF_DEFAULT_STRICKLER_COEFFICIENT</source>
 270       <translation>Default Strickler coefficient</translation>
 271     </message>
 272     <message>
 273       <source>STRICKLER_TABLE_FILTER</source>
 274       <translation>Strickler table files (*.txt);;All files (*.* *)</translation>
 275     </message>
 276   </context>
 277
 278   <context>
 279     <name>HYDROGUI_CalculationDlg</name>
 280     <message>
 281       <source>CALCULATION_NAME</source>
 282       <translation>Calculation case name</translation>
 283     </message>
 284     <message>
 285       <source>CALCULATION_REFERENCE_OBJECTS</source>
 286       <translation>Objects</translation>
 287     </message>
 288     <message>
 289       <source>INCLUDED_OBJECTS</source>
 290       <translation>Included objects</translation>
 291     </message>
 292     <message>
 293       <source>AVAILABLE_GROUPS</source>
 294       <translation>Available groups</translation>
 295     </message>
 296     <message>
 297       <source>INCLUDED_GROUPS</source>
 298       <translation>Included groups</translation>
 299     </message>
 300     <message>
 301       <source>LIMITS</source>
 302       <translation>Limits</translation>
 303     </message>
 304     <message>
 305       <source>NAME</source>
 306       <translation>Name</translation>
 307     </message>
 308     <message>
 309       <source>BATHYMETRY</source>
 310       <translation>Bathymetry</translation>
 311     </message>
 312     <message>
 313       <source>INCLUDE</source>
 314       <translation>Include &gt;&gt;</translation>
 315     </message>
 316     <message>
 317       <source>EXCLUDE</source>
 318       <translation>Exclude &lt;&lt;</translation>
 319     </message>
 320     <message>
 321       <source>ADD</source>
 322       <translation>Add</translation>
 323     </message>
 324     <message>
 325       <source>REMOVE</source>
 326       <translation>Remove</translation>
 327     </message>
 328     <message>
 329       <source>EMPTY_GEOMETRY_OBJECTS</source>
 330       <translation>No one geometry object is selected, should be at least one.</translation>
 331     </message>
 332     <message>
 333       <source>MODE</source>
 334       <translation>Mode</translation>
 335     </message>
 336     <message>
 337       <source>AUTO</source>
 338       <translation>Auto</translation>
 339     </message>
 340     <message>
 341       <source>MANUAL</source>
 342       <translation>Manual</translation>
 343     </message>
 344     <message>
 345       <source>PRIORITY</source>
 346       <translation>Priority</translation>
 347     </message>
 348     <message>
 349       <source>STRICKLER_TABLE</source>
 350       <translation>Strickler table</translation>
 351     </message>
 352     <message>
 353       <source>CALCULATION_REFERENCE_LAND_COVERS</source>
 354       <translation>Land covers</translation>
 355     </message>
 356     <message>
 357       <source>INCLUDED_LAND_COVERS</source>
 358       <translation>Included land covers</translation>
 359     </message>
 360   </context>
 361
 362   <context>
 363     <name>HYDROGUI_CalculationOp</name>
 364     <message>
 365       <source>CREATE_CALCULATION</source>
 366       <translation>Create calculation case</translation>
 367     </message>
 368     <message>
 369       <source>EDIT_CALCULATION</source>
 370       <translation>Edit calculation case</translation>
 371     </message>
 372     <message>
 373       <source>PREVIEW_CASE_ZONES</source>
 374       <translation>Preview case zones</translation>
 375     </message>
 376     <message>
 377       <source>REGIONS_CHANGED</source>
 378       <translation>Regions list modification</translation>
 379     </message>
 380     <message>
 381       <source>ORDER_CHANGED</source>
 382       <translation>Order of objects is changed</translation>
 383     </message>
 384     <message>
 385       <source>CONFIRM_SPLITTING_ZONES_RECALCULATION_REGIONS</source>
 386       <translation>Case splitting zones already exist and will be recalculated after regions list modification. Do you confirm the recalculation?</translation>
 387     </message>
 388     <message>
 389       <source>MODE_CHANGED</source>
 390       <translation>Change creation mode</translation>
 391     </message>
 392     <message>
 393       <source>CONFIRM_SPLITTING_ZONES_RECALCULATION_MODE</source>
 394       <translation>Case splitting zones already exist and will be recalculated after mode change. Do you confirm the recalculation?</translation>
 395     </message>
 396     <message>
 397       <source>EMPTY_REGIONS</source>
 398       <translation>Empty regions</translation>
 399     </message>
 400     <message>
 401       <source>CONFIRM_CONTINUE_WITH_OBJECTS_NOT_INCLUDED_TO_REGION</source>
 402       <translation>Region(s): %1 do not contain any objects. Do you want to continue?</translation>
 403     </message>
 404     <message>
 405       <source>CONFIRM_LAND_COVER_PARTITION_RECALCULATION_REGIONS</source>
 406       <translation>Case land covers partition already exists and will be recalculated after regions list modification. Do you confirm the recalculation?</translation>
 407     </message>
 408     <message>
 409       <source>CONFIRM_LAND_COVER_PARTITION_RECALCULATION_MODE</source>
 410       <translation>Case land covers partition already exists and will be recalculated after mode change. Do you confirm the recalculation?</translation>
 411     </message>
 412   </context>
 413
 414   <context>
 415     <name>HYDROGUI_DataBrowser</name>
 416     <message>
 417       <source>REF_OBJECT_COLUMN</source>
 418       <translation>Ref.Object</translation>
 419     </message>
 420     <message>
 421       <source>ALTITUDE_COLUMN</source>
 422       <translation>Altitude.Object</translation>
 423     </message>
 424     <message>
 425       <source>ZONE_TO_NEW_REGION</source>
 426       <translation>Create a new region</translation>
 427     </message>
 428   </context>
 429
 430   <context>
 431     <name>HYDROGUI_CopyPasteOp</name>
 432     <message>
 433       <source>COPY_PASTE</source>
 434       <translation>Copy/paste</translation>
 435     </message>
 436   </context>
 437
 438   <context>
 439     <name>HYDROGUI_DuplicateOp</name>
 440     <message>
 441       <source>DUPLICATE</source>
 442       <translation>Duplicate</translation>
 443     </message>
 444   </context>
 445
 446   <context>
 447     <name>HYDROGUI_CopyPastePositionOp</name>
 448     <message>
 449       <source>COPY_PASTE_VIEW_POSITION</source>
 450       <translation>Copy/paste view position</translation>
 451     </message>
 452   </context>
 453
 454   <context>
 455     <name>HYDROGUI_DeleteOp</name>
 456     <message>
 457       <source>DELETE</source>
 458       <translation>Delete</translation>
 459     </message>
 460     <message>
 461       <source>DELETE_OBJECTS</source>
 462       <translation>Delete objects</translation>
 463     </message>
 464     <message>
 465       <source>DELETE_OBJECTS_IMPOSIBLE</source>
 466       <translation>One or more selected objects can not be deleted separately from parent object.</translation>
 467     </message>
 468     <message>
 469       <source>DELETED_OBJECTS_HAS_BACKREFERENCES</source>
 470       <translation>One or more selected objects are used to create another ones.
 471 First remove objects which are created on their basis.
 472
 473 %1</translation>
 474     </message>
 475     <message>
 476       <source>DELETE_OBJECT_NAME</source>
 477       <translation>"%1"</translation>
 478     </message>
 479     <message>
 480       <source>DELETE_OBJECT_IS_USED_FOR</source>
 481       <translation>Object "%1" is used for %2</translation>
 482     </message>
 483   </context>
 484
 485   <context>
 486     <name>HYDROGUI_DeleteDlg</name>
 487     <message>
 488       <source>DELETE_OBJECTS</source>
 489       <translation>Delete objects</translation>
 490     </message>
 491     <message>
 492       <source>CONFIRM_DELETION</source>
 493       <translation>Do you really want to delete %1 object(s)?</translation>
 494     </message>
 495   </context>
 496
 497   <context>
 498     <name>HYDROGUI_ExportImageOp</name>
 499     <message>
 500       <source>EXPORT_IMAGE</source>
 501       <translation>Export image</translation>
 502     </message>
 503     <message>
 504       <source>EXPORT_IMAGE_TO_FILE</source>
 505       <translation>Export image to file</translation>
 506     </message>
 507   </context>
 508
 509   <context>
 510     <name>HYDROGUI_InputPanel</name>
 511     <message>
 512       <source>APPLY_AND_CLOSE</source>
 513       <translation>Apply and Close</translation>
 514     </message>
 515     <message>
 516       <source>APPLY</source>
 517       <translation>Apply</translation>
 518     </message>
 519     <message>
 520       <source>CANCEL</source>
 521       <translation>Cancel</translation>
 522     </message>
 523     <message>
 524       <source>CLOSE</source>
 525       <translation>Close</translation>
 526     </message>
 527     <message>
 528       <source>HELP</source>
 529       <translation>Help</translation>
 530     </message>
 531   </context>
 532
 533   <context>
 534     <name>HYDROGUI_Wizard</name>
 535     <message>
 536       <source>NEXT</source>
 537       <translation>Next &gt;</translation>
 538     </message>
 539     <message>
 540       <source>BACK</source>
 541       <translation>&lt; Back</translation>
 542     </message>
 543     <message>
 544       <source>FINISH</source>
 545       <translation>Finish</translation>
 546     </message>
 547   </context>
 548
 549   <context>
 550     <name>HYDROGUI_ImportBathymetryDlg</name>
 551     <message>
 552       <source>BATHYMETRY_NAME</source>
 553       <translation>Bathymetry name</translation>
 554     </message>
 555     <message>
 556       <source>FILE_NAME</source>
 557       <translation>File name</translation>
 558     </message>
 559     <message>
 560       <source>IMPORT_BATHYMETRY_FROM_FILE</source>
 561       <translation>Import bathymetry from file</translation>
 562     </message>
 563     <message>
 564       <source>NAME</source>
 565       <translation>Name</translation>
 566     </message>
 567     <message>
 568       <source>INVERT_BATHYMETRY_ALTITUDES</source>
 569       <translation>Invert altitude values</translation>
 570     </message>
 571   </context>
 572
 573   <context>
 574     <name>HYDROGUI_ImportBathymetryOp</name>
 575     <message>
 576       <source>EDIT_IMPORTED_BATHYMETRY</source>
 577       <translation>Edit imported bathymetry</translation>
 578     </message>
 579     <message>
 580       <source>IMPORT_BATHYMETRY</source>
 581       <translation>Import bathymetry</translation>
 582     </message>
 583     <message>
 584       <source>BAD_IMPORTED_BATHYMETRY_FILE</source>
 585       <translation>'%1'
 586 file cannot be correctly imported for a Bathymetry definition.</translation>
 587     </message>
 588   </context>
 589
 590   <context>
 591     <name>HYDROGUI_ImportImageDlg</name>
 592     <message>
 593       <source>ACTIVATE_POINT_A_SELECTION</source>
 594       <translation>Activate point A selection</translation>
 595     </message>
 596     <message>
 597       <source>ACTIVATE_POINT_B_SELECTION</source>
 598       <translation>Activate point B selection</translation>
 599     </message>
 600     <message>
 601       <source>ACTIVATE_POINT_C_SELECTION</source>
 602       <translation>Activate point C selection</translation>
 603     </message>
 604     <message>
 605       <source>BY_REFERENCE_IMAGE</source>
 606       <translation>Choose points on the reference image</translation>
 607     </message>
 608     <message>
 609       <source>FILE_NAME</source>
 610       <translation>File name</translation>
 611     </message>
 612     <message>
 613       <source>IMAGE_NAME</source>
 614       <translation>Image name</translation>
 615     </message>
 616     <message>
 617       <source>IMPORT_IMAGE_FROM_FILE</source>
 618       <translation>Import image from file</translation>
 619     </message>
 620     <message>
 621       <source>MANUALLY_GEODESIC</source>
 622       <translation>Manually input Geographic coordinates</translation>
 623     </message>
 624     <message>
 625       <source>MANUALLY_LAMBERT93</source>
 626       <translation>Manually input Plane coordinates (Lambert93)</translation>
 627     </message>
 628     <message>
 629       <source>LAMBERT93_FROM_FILE</source>
 630       <translation>Get Plane coordinates (Lambert93) from file</translation>
 631     </message>
 632     <message>
 633       <source>IMAGE_CS</source>
 634       <translation>Image CS</translation>
 635     </message>
 636     <message>
 637       <source>GEODESIC</source>
 638       <translation>Geographic coordinates</translation>
 639     </message>
 640     <message>
 641       <source>LAMBERT93</source>
 642       <translation>Plane coordinates (Lambert93)</translation>
 643     </message>
 644     <message>
 645       <source>POINT_LATITUDE</source>
 646       <translation>Lat</translation>
 647     </message>
 648     <message>
 649       <source>POINT_LONGITUDE</source>
 650       <translation>Long</translation>
 651     </message>
 652     <message>
 653       <source>REFERENCE_IMAGE_CS</source>
 654       <translation>Reference Image CS</translation>
 655     </message>
 656     <message>
 657       <source>NAME</source>
 658       <translation>Name</translation>
 659     </message>
 660     <message>
 661       <source>TRANSFORM_IMAGE</source>
 662       <translation>Transform image</translation>
 663     </message>
 664     <message>
 665       <source>IMPORT_GEO_DATA_FROM_FILE</source>
 666       <translation>Import georeferencement data from file</translation>
 667     </message>
 668     <message>
 669       <source>IMAGE_GEOREFERENCEMENT_FILTER</source>
 670       <translation>Image georeferencement files (*.grf);;All files (*.* *)</translation>
 671     </message>
 672   </context>
 673
 674   <context>
 675     <name>HYDROGUI_ImportImageOp</name>
 676     <message>
 677       <source>EDIT_IMPORTED_IMAGE</source>
 678       <translation>Edit imported image</translation>
 679     </message>
 680     <message>
 681       <source>IMPORT_IMAGE</source>
 682       <translation>Import image</translation>
 683     </message>
 684     <message>
 685       <source>IMPORTED_IMAGE</source>
 686       <translation>Imported image</translation>
 687     </message>
 688     <message>
 689       <source>TRANSFORM_IMAGE</source>
 690       <translation>Transform image</translation>
 691     </message>
 692     <message>
 693       <source>POINTS_A_B_ARE_IDENTICAL</source>
 694       <translation>Points A, B are identical.</translation>
 695     </message>
 696     <message>
 697       <source>POINTS_A_B_C_BELONG_TO_SINGLE_LINE</source>
 698       <translation>Points A, B, C belong to a single line.</translation>
 699     </message>
 700     <message>
 701       <source>REFERENCE_IMAGE</source>
 702       <translation>Reference image</translation>
 703     </message>
 704     <message>
 705       <source>REFERENCE_IMAGE_IS_NOT_SELECTED</source>
 706       <translation>Reference image is not selected.</translation>
 707     </message>
 708     <message>
 709       <source>REFERENCE_POINTS_A_B_ARE_IDENTICAL</source>
 710       <translation>Reference points A, B are identical.</translation>
 711     </message>
 712     <message>
 713       <source>REFERENCE_POINTS_A_B_C_BELONG_TO_SINGLE_LINE</source>
 714       <translation>Reference points A, B, C belong to a single line.</translation>
 715     </message>
 716     <message>
 717       <source>TRANSFORMATION_MATRIX_CANNOT_BE_COMPUTED</source>
 718       <translation>Transformation matrix cannot be computed.</translation>
 719     </message>
 720     <message>
 721       <source>CORRECT_INPUT_DATA</source>
 722       <translation>Correct input data</translation>
 723     </message>
 724     <message>
 725       <source>CONFIRM_REMOVE_REFERENCE_FROM_IMAGE</source>
 726       <translation>The image "%1" has a reference to the current object.
 727 Would you like to remove all references from the image?</translation>
 728     </message>
 729     <message>
 730       <source>CANT_LOAD_GEOREFERENCEMENT_FILE</source>
 731       <translation>Can't load data from the image georeferencement file.</translation>
 732     </message>
 733     <message>
 734       <source>SELECT_IMAGE_NAME</source>
 735       <translation>The image name is not input</translation>
 736     </message>
 737     <message>
 738       <source>SELECT_IMAGE_FILE</source>
 739       <translation>The image file is not chosen</translation>
 740     </message>
 741   </context>
 742
 743   <context>
 744     <name>HYDROGUI_Module</name>
 745     <message>
 746       <source>DSK_CREATE_CALCULATION</source>
 747       <translation>Create calculation case</translation>
 748     </message>
 749     <message>
 750       <source>DSK_CREATE_POLYLINE</source>
 751       <translation>Create polyline</translation>
 752     </message>
 753     <message>
 754       <source>DSK_CREATE_POLYLINE_3D</source>
 755       <translation>Create polyline 3D</translation>
 756     </message>
 757     <message>
 758       <source>DSK_CREATE_PROFILE</source>
 759       <translation>Create profile</translation>
 760     </message>
 761     <message>
 762       <source>DSK_IMPORT_PROFILES</source>
 763       <translation>Import profiles from file(s)</translation>
 764     </message>
 765     <message>
 766       <source>DSK_GEOREFERENCEMENT</source>
 767       <translation>Profile(s) georeferencement</translation>
 768     </message>
 769     <message>
 770       <source>DSK_CREATE_IMMERSIBLE_ZONE</source>
 771       <translation>Create immersible zone</translation>
 772     </message>
 773     <message>
 774       <source>DSK_EDIT_IMMERSIBLE_ZONE</source>
 775       <translation>Edit immersible zone</translation>
 776     </message>
 777     <message>
 778       <source>DSK_CREATE_STREAM</source>
 779       <translation>Create stream</translation>
 780     </message>
 781     <message>
 782       <source>DSK_EDIT_STREAM</source>
 783       <translation>Edit stream</translation>
 784     </message>
 785     <message>
 786       <source>DSK_CREATE_CHANNEL</source>
 787       <translation>Create channel</translation>
 788     </message>
 789     <message>
 790       <source>DSK_EDIT_CHANNEL</source>
 791       <translation>Edit channel</translation>
 792     </message>
 793     <message>
 794       <source>DSK_CREATE_DIGUE</source>
 795       <translation>Create digue</translation>
 796     </message>
 797     <message>
 798       <source>DSK_EDIT_DIGUE</source>
 799       <translation>Edit digue</translation>
 800     </message>
 801     <message>
 802       <source>DSK_IMPORT_STRICKLER_TABLE</source>
 803       <translation>Import Strickler table</translation>
 804     </message>
 805     <message>
 806       <source>DSK_EXPORT_STRICKLER_TABLE</source>
 807       <translation>Export Strickler table</translation>
 808     </message>
 809     <message>
 810       <source>DSK_EDIT_STRICKLER_TABLE</source>
 811       <translation>Edit Strickler table</translation>
 812     </message>
 813     <message>
 814       <source>DSK_DUPLICATE_STRICKLER_TABLE</source>
 815       <translation>Duplicate Strickler table</translation>
 816     </message>
 817     <message>
 818       <source>DSK_CREATE_LAND_COVER</source>
 819       <translation>Create land cover</translation>
 820     </message>
 821     <message>
 822       <source>DSK_EDIT_LAND_COVER</source>
 823       <translation>Edit land cover</translation>
 824     </message>
 825     <message>
 826       <source>DSK_COPY</source>
 827       <translation>Copy</translation>
 828     </message>
 829     <message>
 830       <source>DSK_CUT_IMAGES</source>
 831       <translation>Cut images</translation>
 832     </message>
 833     <message>
 834       <source>DSK_DELETE</source>
 835       <translation>Delete</translation>
 836     </message>
 837     <message>
 838       <source>DSK_EDIT_CALCULATION</source>
 839       <translation>Edit calculation case</translation>
 840     </message>
 841     <message>
 842       <source>DSK_EXPORT_CALCULATION</source>
 843       <translation>Export calculation case to GEOM</translation>
 844     </message>
 845     <message>
 846       <source>DSK_EDIT_CUT_IMAGE</source>
 847       <translation>Edit cut image</translation>
 848     </message>
 849     <message>
 850       <source>DSK_EDIT_FUSED_IMAGE</source>
 851       <translation>Edit fused image</translation>
 852     </message>
 853     <message>
 854       <source>DSK_EDIT_IMPORTED_IMAGE</source>
 855       <translation>Edit imported image</translation>
 856     </message>
 857     <message>
 858       <source>DSK_EDIT_POLYLINE</source>
 859       <translation>Edit polyline</translation>
 860     </message>
 861     <message>
 862       <source>DSK_EDIT_POLYLINE_3D</source>
 863       <translation>Edit polyline 3D</translation>
 864     </message>
 865     <message>
 866       <source>DSK_EDIT_SPLITTED_IMAGE</source>
 867       <translation>Edit split image</translation>
 868     </message>
 869     <message>
 870       <source>DSK_COPY_VIEWER_POSITION</source>
 871       <translation>Copy position</translation>
 872     </message>
 873     <message>
 874       <source>DSK_EXPORT_IMAGE</source>
 875       <translation>Export image</translation>
 876     </message>
 877     <message>
 878       <source>DSK_FUSE_IMAGES</source>
 879       <translation>Fuse images</translation>
 880     </message>
 881     <message>
 882       <source>DSK_HIDE</source>
 883       <translation>Hide</translation>
 884     </message>
 885     <message>
 886       <source>DSK_HIDE_ALL</source>
 887       <translation>Hide all</translation>
 888     </message>
 889     <message>
 890       <source>DSK_IMPORT_BATHYMETRY</source>
 891       <translation>Import bathymetry</translation>
 892     </message>
 893     <message>
 894       <source>DSK_EDIT_IMPORTED_BATHYMETRY</source>
 895       <translation>Edit imported bathymetry</translation>
 896     </message>
 897     <message>
 898       <source>DSK_BATHYMETRY_BOUNDS</source>
 899       <translation>Create boundary polyline</translation>
 900     </message>
 901     <message>
 902       <source>DSK_IMPORT_IMAGE</source>
 903       <translation>Import image</translation>
 904     </message>
 905     <message>
 906       <source>DSK_IMPORT_POLYLINE</source>
 907       <translation>Import polyline from file(s)</translation>
 908     </message>
 909     <message>
 910       <source>DSK_LOAD_VISUAL_STATE</source>
 911       <translation>Load visual state</translation>
 912     </message>
 913     <message>
 914       <source>DSK_OBSERVE_IMAGE</source>
 915       <translation>Observe image</translation>
 916     </message>
 917     <message>
 918       <source>DSK_PASTE</source>
 919       <translation>Paste</translation>
 920     </message>
 921     <message>
 922       <source>DSK_REDO</source>
 923       <translation>Redo</translation>
 924     </message>
 925     <message>
 926       <source>DSK_REMOVE_IMAGE_REFERENCE</source>
 927       <translation>Remove reference</translation>
 928     </message>
 929     <message>
 930       <source>DSK_SAVE_VISUAL_STATE</source>
 931       <translation>Save visual state</translation>
 932     </message>
 933     <message>
 934       <source>DSK_SHOW</source>
 935       <translation>Show</translation>
 936     </message>
 937     <message>
 938       <source>DSK_SHOW_ALL</source>
 939       <translation>Show all</translation>
 940     </message>
 941     <message>
 942       <source>DSK_SHOW_ONLY</source>
 943       <translation>Show only</translation>
 944     </message>
 945     <message>
 946       <source>DSK_SPLIT_IMAGE</source>
 947       <translation>Split image</translation>
 948     </message>
 949     <message>
 950       <source>DSK_UNDO</source>
 951       <translation>Undo</translation>
 952     </message>
 953     <message>
 954       <source>DSK_UPDATE_OBJECT</source>
 955       <translation>Update</translation>
 956     </message>
 957     <message>
 958       <source>DSK_FORCED_UPDATE_OBJECT</source>
 959       <translation>Forced update</translation>
 960     </message>
 961     <message>
 962       <source>DSK_IMPORT_OBSTACLE_FROM_FILE</source>
 963       <translation>Import obstacle from file</translation>
 964     </message>
 965     <message>
 966       <source>DSK_CREATE_BOX</source>
 967       <translation>Create box obstacle</translation>
 968     </message>
 969     <message>
 970       <source>DSK_IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
 971       <translation>Import GEOM object(s) as obstacle(s)</translation>
 972     </message>
 973     <message>
 974       <source>DSK_IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
 975       <translation>Import GEOM object(s) as polyline(s)</translation>
 976     </message>
 977     <message>
 978       <source>DSK_CREATE_CYLINDER</source>
 979       <translation>Create cylinder obstacle</translation>
 980     </message>
 981     <message>
 982       <source>DSK_TRANSLATE_OBSTACLE</source>
 983       <translation>Translate obstacle</translation>
 984     </message>
 985     <message>
 986       <source>DSK_COLOR</source>
 987       <translation>Set object color</translation>
 988     </message>
 989     <message>
 990       <source>DSK_ZLEVEL</source>
 991       <translation>Change layer order</translation>
 992     </message>
 993     <message>
 994       <source>DSK_EDIT_LOCAL_CS</source>
 995       <translation>Change local CS</translation>
 996     </message>
 997     <message>
 998       <source>DSK_SUBMERSIBLE</source>
 999       <translation>Submersible</translation>
1000     </message>
1001     <message>
1002       <source>DSK_EXPORT_POLYLINE</source>
1003       <translation>Export Polyline</translation>
1004     </message>
1005     <message>
1006       <source>MEN_CREATE_CALCULATION</source>
1007       <translation>Create calculation case</translation>
1008     </message>
1009     <message>
1010       <source>MEN_CREATE_POLYLINE</source>
1011       <translation>Create polyline</translation>
1012     </message>
1013     <message>
1014       <source>MEN_CREATE_POLYLINE_3D</source>
1015       <translation>Create polyline 3D</translation>
1016     </message>
1017     <message>
1018       <source>MEN_CREATE_PROFILE</source>
1019       <translation>Create profile</translation>
1020     </message>
1021     <message>
1022       <source>MEN_IMPORT_PROFILES</source>
1023       <translation>Import profiles</translation>
1024     </message>
1025     <message>
1026       <source>MEN_GEOREFERENCEMENT</source>
1027       <translation>Georeferencement</translation>
1028     </message>
1029     <message>
1030       <source>MEN_CREATE_ZONE</source>
1031       <translation>Create zone</translation>
1032     </message>
1033     <message>
1034       <source>MEN_CREATE_IMMERSIBLE_ZONE</source>
1035       <translation>Create immersible zone</translation>
1036     </message>
1037     <message>
1038       <source>MEN_EDIT_IMMERSIBLE_ZONE</source>
1039       <translation>Edit immersible zone</translation>
1040     </message>
1041     <message>
1042       <source>MEN_CREATE_STREAM</source>
1043       <translation>Create stream</translation>
1044     </message>
1045     <message>
1046       <source>MEN_EDIT_STREAM</source>
1047       <translation>Edit stream</translation>
1048     </message>
1049     <message>
1050       <source>MEN_CREATE_CHANNEL</source>
1051       <translation>Create channel</translation>
1052     </message>
1053     <message>
1054       <source>MEN_EDIT_CHANNEL</source>
1055       <translation>Edit channel</translation>
1056     </message>
1057     <message>
1058       <source>MEN_CREATE_DIGUE</source>
1059       <translation>Create digue</translation>
1060     </message>
1061     <message>
1062       <source>MEN_EDIT_DIGUE</source>
1063       <translation>Edit digue</translation>
1064     </message>
1065     <message>
1066       <source>MEN_IMPORT_STRICKLER_TABLE</source>
1067       <translation>Import Strickler table</translation>
1068     </message>
1069     <message>
1070       <source>MEN_EXPORT_STRICKLER_TABLE</source>
1071       <translation>Export Strickler table</translation>
1072     </message>
1073     <message>
1074       <source>MEN_EDIT_STRICKLER_TABLE</source>
1075       <translation>Edit Strickler table</translation>
1076     </message>
1077     <message>
1078       <source>MEN_DUPLICATE_STRICKLER_TABLE</source>
1079       <translation>Duplicate Strickler table</translation>
1080     </message>
1081     <message>
1082       <source>MEN_CREATE_LAND_COVER</source>
1083       <translation>Create land cover</translation>
1084     </message>
1085     <message>
1086       <source>MEN_EDIT_LAND_COVER</source>
1087       <translation>Edit land cover</translation>
1088     </message>
1089     <message>
1090       <source>MEN_CUT_IMAGES</source>
1091       <translation>Cut images</translation>
1092     </message>
1093     <message>
1094       <source>MEN_DELETE</source>
1095       <translation>Delete</translation>
1096     </message>
1097     <message>
1098       <source>MEN_DESK_ARTIFICIAL</source>
1099       <translation>Artificial objects</translation>
1100     </message>
1101     <message>
1102       <source>MEN_DESK_HYDRO</source>
1103       <translation>HYDRO</translation>
1104     </message>
1105     <message>
1106       <source>MEN_DESK_STREAM</source>
1107       <translation>Stream</translation>
1108     </message>
1109     <message>
1110       <source>MEN_DESK_NATURAL</source>
1111       <translation>Natural objects</translation>
1112     </message>
1113     <message>
1114       <source>MEN_DESK_OBSTACLE</source>
1115       <translation>Obstacle</translation>
1116     </message>
1117     <message>
1118       <source>MEN_DESK_PROFILE</source>
1119       <translation>Profile</translation>
1120     </message>
1121     <message>
1122       <source>MEN_EDIT_CALCULATION</source>
1123       <translation>Edit calculation case</translation>
1124     </message>
1125     <message>
1126       <source>MEN_EXPORT_CALCULATION</source>
1127       <translation>Export calculation case</translation>
1128     </message>
1129     <message>
1130       <source>MEN_EDIT_CUT_IMAGE</source>
1131       <translation>Edit cut image</translation>
1132     </message>
1133     <message>
1134       <source>MEN_EDIT_FUSED_IMAGE</source>
1135       <translation>Edit fused image</translation>
1136     </message>
1137     <message>
1138       <source>MEN_EDIT_IMPORTED_IMAGE</source>
1139       <translation>Edit imported image</translation>
1140     </message>
1141     <message>
1142       <source>MEN_EDIT_POLYLINE</source>
1143       <translation>Edit polyline</translation>
1144     </message>
1145     <message>
1146       <source>MEN_EDIT_POLYLINE_3D</source>
1147       <translation>Edit polyline 3D</translation>
1148     </message>
1149     <message>
1150       <source>MEN_EDIT_PROFILE</source>
1151       <translation>Edit profile</translation>
1152     </message>
1153     <message>
1154       <source>MEN_EDIT_SPLITTED_IMAGE</source>
1155       <translation>Edit split image</translation>
1156     </message>
1157     <message>
1158       <source>MEN_COPY_VIEWER_POSITION</source>
1159       <translation>Copy position</translation>
1160     </message>
1161     <message>
1162       <source>MEN_EXPORT_IMAGE</source>
1163       <translation>Export image</translation>
1164     </message>
1165     <message>
1166       <source>MEN_FUSE_IMAGES</source>
1167       <translation>Fuse images</translation>
1168     </message>
1169     <message>
1170       <source>MEN_HIDE</source>
1171       <translation>Hide</translation>
1172     </message>
1173     <message>
1174       <source>MEN_HIDE_ALL</source>
1175       <translation>Hide all</translation>
1176     </message>
1177     <message>
1178       <source>MEN_IMPORT_BATHYMETRY</source>
1179       <translation>Import bathymetry</translation>
1180     </message>
1181     <message>
1182       <source>MEN_EDIT_IMPORTED_BATHYMETRY</source>
1183       <translation>Edit imported bathymetry</translation>
1184     </message>
1185     <message>
1186       <source>MEN_BATHYMETRY_BOUNDS</source>
1187       <translation>Create boundary polyline</translation>
1188     </message>
1189     <message>
1190       <source>MEN_IMPORT_IMAGE</source>
1191       <translation>Import image</translation>
1192     </message>
1193     <message>
1194       <source>MEN_IMPORT_POLYLINE</source>
1195       <translation>Import polyline</translation>
1196     </message>
1197     <message>
1198       <source>MEN_LOAD_VISUAL_STATE</source>
1199       <translation>Load visual state</translation>
1200     </message>
1201     <message>
1202       <source>MEN_OBSERVE_IMAGE</source>
1203       <translation>Observe image</translation>
1204     </message>
1205     <message>
1206       <source>MEN_COPY</source>
1207       <translation>Copy</translation>
1208     </message>
1209     <message>
1210       <source>MEN_PASTE</source>
1211       <translation>Paste</translation>
1212     </message>
1213     <message>
1214       <source>MEN_REDO</source>
1215       <translation>Redo</translation>
1216     </message>
1217     <message>
1218       <source>MEN_REMOVE_IMAGE_REFERENCE</source>
1219       <translation>Remove reference</translation>
1220     </message>
1221     <message>
1222       <source>MEN_SAVE_VISUAL_STATE</source>
1223       <translation>Save visual state</translation>
1224     </message>
1225     <message>
1226       <source>MEN_SHOW</source>
1227       <translation>Show</translation>
1228     </message>
1229     <message>
1230       <source>MEN_SHOW_ALL</source>
1231       <translation>Show all</translation>
1232     </message>
1233     <message>
1234       <source>MEN_SHOW_ONLY</source>
1235       <translation>Show only</translation>
1236     </message>
1237     <message>
1238       <source>MEN_SPLIT_IMAGE</source>
1239       <translation>Split image</translation>
1240     </message>
1241     <message>
1242       <source>MEN_UNDO</source>
1243       <translation>Undo</translation>
1244     </message>
1245     <message>
1246       <source>MEN_UPDATE_OBJECT</source>
1247       <translation>Update</translation>
1248     </message>
1249     <message>
1250       <source>MEN_FORCED_UPDATE_OBJECT</source>
1251       <translation>Forced update</translation>
1252     </message>
1253     <message>
1254       <source>MEN_IMPORT_OBSTACLE_FROM_FILE</source>
1255       <translation>Import obstacle</translation>
1256     </message>
1257     <message>
1258       <source>MEN_IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
1259       <translation>Import as obstacle</translation>
1260     </message>
1261     <message>
1262       <source>MEN_IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
1263       <translation>Import as polyline</translation>
1264     </message>
1265     <message>
1266       <source>MEN_CREATE_BOX</source>
1267       <translation>Create box</translation>
1268     </message>
1269     <message>
1270       <source>MEN_CREATE_CYLINDER</source>
1271       <translation>Create cylinder</translation>
1272     </message>
1273     <message>
1274       <source>MEN_TRANSLATE_OBSTACLE</source>
1275       <translation>Translate</translation>
1276     </message>
1277     <message>
1278       <source>MEN_COLOR</source>
1279       <translation>Color</translation>
1280     </message>
1281     <message>
1282       <source>MEN_ZLEVEL</source>
1283       <translation>Change layer order</translation>
1284     </message>
1285     <message>
1286       <source>MEN_EDIT_LOCAL_CS</source>
1287       <translation>Change local CS</translation>
1288     </message>
1289     <message>
1290       <source>MEN_SUBMERSIBLE</source>
1291       <translation>Submersible</translation>
1292     </message>
1293     <message>
1294       <source>MEN_EXPORT_POLYLINE</source>
1295       <translation>Export Polyline</translation>
1296     </message>
1297
1298     <message>
1299       <source>STB_CREATE_CALCULATION</source>
1300       <translation>Create calculation case</translation>
1301     </message>
1302     <message>
1303       <source>STB_CREATE_POLYLINE</source>
1304       <translation>Create polyline</translation>
1305     </message>
1306     <message>
1307       <source>STB_CREATE_POLYLINE_3D</source>
1308       <translation>Create polyline 3D</translation>
1309     </message>
1310     <message>
1311       <source>STB_CREATE_PROFILE</source>
1312       <translation>Create profile</translation>
1313     </message>
1314     <message>
1315       <source>STB_IMPORT_PROFILES</source>
1316       <translation>Import profiles from file(s)</translation>
1317     </message>
1318     <message>
1319       <source>STB_GEOREFERENCEMENT</source>
1320       <translation>Profile(s) georeferencement</translation>
1321     </message>
1322     <message>
1323       <source>STB_CREATE_IMMERSIBLE_ZONE</source>
1324       <translation>Create immersible zone</translation>
1325     </message>
1326     <message>
1327       <source>STB_EDIT_IMMERSIBLE_ZONE</source>
1328       <translation>Edit immersible zone</translation>
1329     </message>
1330     <message>
1331       <source>STB_CREATE_STREAM</source>
1332       <translation>Create stream</translation>
1333     </message>
1334     <message>
1335       <source>STB_EDIT_STREAM</source>
1336       <translation>Edit stream</translation>
1337     </message>
1338     <message>
1339       <source>STB_CREATE_CHANNEL</source>
1340       <translation>Create channel</translation>
1341     </message>
1342     <message>
1343       <source>STB_EDIT_CHANNEL</source>
1344       <translation>Edit channel</translation>
1345     </message>
1346     <message>
1347       <source>STB_CREATE_DIGUE</source>
1348       <translation>Create digue</translation>
1349     </message>
1350     <message>
1351       <source>STB_EDIT_DIGUE</source>
1352       <translation>Edit digue</translation>
1353     </message>
1354     <message>
1355       <source>STB_IMPORT_STRICKLER_TABLE</source>
1356       <translation>Import Strickler table</translation>
1357     </message>
1358     <message>
1359       <source>STB_EXPORT_STRICKLER_TABLE</source>
1360       <translation>Export Strickler table</translation>
1361     </message>
1362     <message>
1363       <source>STB_EDIT_STRICKLER_TABLE</source>
1364       <translation>Edit Strickler table</translation>
1365     </message>
1366     <message>
1367       <source>STB_DUPLICATE_STRICKLER_TABLE</source>
1368       <translation>Duplicate Strickler table</translation>
1369     </message>
1370     <message>
1371       <source>STB_CREATE_LAND_COVER</source>
1372       <translation>Create land cover</translation>
1373     </message>
1374     <message>
1375       <source>STB_EDIT_LAND_COVER</source>
1376       <translation>Edit land cover</translation>
1377     </message>
1378     <message>
1379       <source>STB_COPY</source>
1380       <translation>Copy</translation>
1381     </message>
1382     <message>
1383       <source>STB_CUT_IMAGES</source>
1384       <translation>Cut images</translation>
1385     </message>
1386     <message>
1387       <source>STB_DELETE</source>
1388       <translation>Delete</translation>
1389     </message>
1390     <message>
1391       <source>STB_EDIT_CALCULATION</source>
1392       <translation>Edit calculation case</translation>
1393     </message>
1394     <message>
1395       <source>STB_EXPORT_CALCULATION</source>
1396       <translation>Export calculation case to GEOM</translation>
1397     </message>
1398     <message>
1399       <source>STB_EDIT_CUT_IMAGE</source>
1400       <translation>Edit cut image</translation>
1401     </message>
1402     <message>
1403       <source>STB_EDIT_FUSED_IMAGE</source>
1404       <translation>Edit fused image</translation>
1405     </message>
1406     <message>
1407       <source>STB_EDIT_IMPORTED_IMAGE</source>
1408       <translation>Edit imported image</translation>
1409     </message>
1410     <message>
1411       <source>STB_EDIT_POLYLINE</source>
1412       <translation>Edit polyline</translation>
1413     </message>
1414     <message>
1415       <source>STB_EDIT_POLYLINE_3D</source>
1416       <translation>Edit polyline 3D</translation>
1417     </message>
1418     <message>
1419       <source>STB_EDIT_SPLITTED_IMAGE</source>
1420       <translation>Edit split image</translation>
1421     </message>
1422     <message>
1423       <source>STB_COPY_VIEWER_POSITION</source>
1424       <translation>Copy position</translation>
1425     </message>
1426     <message>
1427       <source>STB_EXPORT_IMAGE</source>
1428       <translation>Export image</translation>
1429     </message>
1430     <message>
1431       <source>STB_FUSE_IMAGES</source>
1432       <translation>Fuse images</translation>
1433     </message>
1434     <message>
1435       <source>STB_HIDE</source>
1436       <translation>Hide</translation>
1437     </message>
1438     <message>
1439       <source>STB_HIDE_ALL</source>
1440       <translation>Hide all</translation>
1441     </message>
1442     <message>
1443       <source>STB_IMPORT_BATHYMETRY</source>
1444       <translation>Import bathymetry</translation>
1445     </message>
1446     <message>
1447       <source>STB_EDIT_IMPORTED_BATHYMETRY</source>
1448       <translation>Edit imported bathymetry</translation>
1449     </message>
1450     <message>
1451       <source>STB_BATHYMETRY_BOUNDS</source>
1452       <translation>Create boundary polyline</translation>
1453     </message>
1454     <message>
1455       <source>STB_IMPORT_IMAGE</source>
1456       <translation>Import image</translation>
1457     </message>
1458     <message>
1459       <source>STB_IMPORT_POLYLINE</source>
1460       <translation>Import polyline</translation>
1461     </message>
1462     <message>
1463       <source>STB_LOAD_VISUAL_STATE</source>
1464       <translation>Load visual state</translation>
1465     </message>
1466     <message>
1467       <source>STB_OBSERVE_IMAGE</source>
1468       <translation>Observe image</translation>
1469     </message>
1470     <message>
1471       <source>STB_PASTE</source>
1472       <translation>Paste</translation>
1473     </message>
1474     <message>
1475       <source>STB_REDO</source>
1476       <translation>Redo</translation>
1477     </message>
1478     <message>
1479       <source>STB_REMOVE_IMAGE_REFERENCE</source>
1480       <translation>Remove reference</translation>
1481     </message>
1482     <message>
1483       <source>STB_SAVE_VISUAL_STATE</source>
1484       <translation>Save visual state</translation>
1485     </message>
1486     <message>
1487       <source>STB_SHOW</source>
1488       <translation>Show</translation>
1489     </message>
1490     <message>
1491       <source>STB_SHOW_ALL</source>
1492       <translation>Show all</translation>
1493     </message>
1494     <message>
1495       <source>STB_SHOW_ONLY</source>
1496       <translation>Show only</translation>
1497     </message>
1498     <message>
1499       <source>STB_SPLIT_IMAGE</source>
1500       <translation>Split image</translation>
1501     </message>
1502     <message>
1503       <source>STB_UNDO</source>
1504       <translation>Undo</translation>
1505     </message>
1506     <message>
1507       <source>STB_UPDATE_OBJECT</source>
1508       <translation>Update</translation>
1509     </message>
1510     <message>
1511       <source>STB_FORCED_UPDATE_OBJECT</source>
1512       <translation>Forced update</translation>
1513     </message>
1514     <message>
1515       <source>STB_IMPORT_OBSTACLE_FROM_FILE</source>
1516       <translation>Import obstacle from file</translation>
1517     </message>
1518     <message>
1519       <source>STB_IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
1520       <translation>Import GEOM object(s) as obstacle(s)</translation>
1521     </message>
1522     <message>
1523       <source>STB_IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
1524       <translation>Import GEOM object(s) as polyline(s)</translation>
1525     </message>
1526     <message>
1527       <source>STB_CREATE_BOX</source>
1528       <translation>Create box obstacle</translation>
1529     </message>
1530     <message>
1531       <source>STB_CREATE_CYLINDER</source>
1532       <translation>Create cylinder obstacle</translation>
1533     </message>
1534     <message>
1535       <source>STB_TRANSLATE_OBSTACLE</source>
1536       <translation>Translate obstacle</translation>
1537     </message>
1538     <message>
1539       <source>STB_COLOR</source>
1540       <translation>Set object color</translation>
1541     </message>
1542     <message>
1543       <source>STB_ZLEVEL</source>
1544       <translation>Change layer order</translation>
1545     </message>
1546     <message>
1547       <source>STB_EDIT_LOCAL_CS</source>
1548       <translation>Change local CS</translation>
1549     </message>
1550
1551     <message>
1552       <source>MEN_CREATE_STREAM_BOTTOM</source>
1553       <translation>Find bottom</translation>
1554     </message>
1555     <message>
1556       <source>DSK_CREATE_STREAM_BOTTOM</source>
1557       <translation>Create stream bottom polyline</translation>
1558     </message>
1559     <message>
1560       <source>STB_CREATE_STREAM_BOTTOM</source>
1561       <translation>Creates the stream bottom polyline on selected stream object</translation>
1562     </message>
1563     <message>
1564       <source>STB_SUBMERSIBLE</source>
1565       <translation>If the object is submersible</translation>
1566     </message>
1567     <message>
1568       <source>STB_EXPORT_POLYLINE</source>
1569       <translation>Export Polyline</translation>
1570     </message>
1571
1572
1573     <message>
1574       <source>MEN_PROFILE_INTERPOLATE</source>
1575       <translation>Profiles interpolation</translation>
1576     </message>
1577     <message>
1578       <source>DSK_PROFILE_INTERPOLATE</source>
1579       <translation>Interpolate the stream profiles</translation>
1580     </message>
1581     <message>
1582       <source>STB_PROFILE_INTERPOLATE</source>
1583       <translation>Creates the new stream profiles using interpolation of selected ones</translation>
1584     </message>
1585
1586   </context>
1587
1588   <context>
1589     <name>HYDROGUI_PolylineOp</name>
1590     <message>
1591       <source>CREATE_POLYLINE</source>
1592       <translation>Create polyline</translation>
1593     </message>
1594     <message>
1595       <source>EDIT_POLYLINE</source>
1596       <translation>Edit polyline</translation>
1597     </message>
1598     <message>
1599       <source>EMPTY_POLYLINE_DATA</source>
1600       <translation>No one section is created for polyline, should be at least one.</translation>
1601     </message>
1602     <message>
1603       <source>NUMBER_OF_SECTION_POINTS_INCORRECT</source>
1604       <translation>Number of points in each polyline section should not be less than 2.</translation>
1605     </message>
1606     <message>
1607       <source>POLYLINE_IS_UNEDITABLE_TLT</source>
1608       <translation>Polyline can not be edited</translation>
1609     </message>
1610     <message>
1611       <source>POLYLINE_IS_UNEDITABLE_MSG</source>
1612       <translation>Polyline has an unsupported format and can not be edited.</translation>
1613     </message>
1614   </context>
1615
1616   <context>
1617     <name>HYDROGUI_Poly3DOp</name>
1618     <message>
1619       <source>CREATE_POLYLINE_3D</source>
1620       <translation>Create polyline 3D</translation>
1621     </message>
1622     <message>
1623       <source>EDIT_POLYLINE_3D</source>
1624       <translation>Edit polyline 3D</translation>
1625     </message>
1626   </context>
1627
1628   <context>
1629     <name>HYDROGUI_ProfileOp</name>
1630     <message>
1631       <source>CREATE_PROFILE</source>
1632       <translation>Create profile</translation>
1633     </message>
1634     <message>
1635       <source>EDIT_PROFILE</source>
1636       <translation>Edit profile</translation>
1637     </message>
1638     <message>
1639       <source>NUMBER_OF_PROFILE_POINTS_INCORRECT</source>
1640       <translation>Number of profile points should not be less than 2.</translation>
1641     </message>
1642   </context>
1643
1644   <context>
1645     <name>HYDROGUI_RemoveImageRefsOp</name>
1646     <message>
1647       <source>REMOVE_IMAGE_REFERENCE</source>
1648       <translation>Remove image reference</translation>
1649     </message>
1650   </context>
1651
1652   <context>
1653     <name>HYDROGUI_ShowHideOp</name>
1654     <message>
1655       <source>SHOW</source>
1656       <translation>Show</translation>
1657     </message>
1658     <message>
1659       <source>SHOW_ALL</source>
1660       <translation>Show all</translation>
1661     </message>
1662     <message>
1663       <source>SHOW_ONLY</source>
1664       <translation>Show only</translation>
1665     </message>
1666     <message>
1667       <source>HIDE</source>
1668       <translation>Hide</translation>
1669     </message>
1670     <message>
1671       <source>HIDE_ALL</source>
1672       <translation>Hide all</translation>
1673     </message>
1674   </context>
1675
1676   <context>
1677     <name>HYDROGUI_ObserveImageOp</name>
1678     <message>
1679       <source>OBSERVE_IMAGE</source>
1680       <translation>Observe image</translation>
1681     </message>
1682   </context>
1683
1684   <context>
1685     <name>HYDROGUI_PolylineDlg</name>
1686     <message>
1687       <source>ADD_ELEMENT</source>
1688       <translation>Add element</translation>
1689     </message>
1690     <message>
1691       <source>EDIT_ELEMENT</source>
1692       <translation>Edit element</translation>
1693     </message>
1694     <message>
1695       <source>POLYLINE_NAME_TLT</source>
1696       <translation>Name</translation>
1697     </message>
1698   </context>
1699
1700   <context>
1701     <name>HYDROGUI_Poly3DDlg</name>
1702     <message>
1703       <source>POLYLINE_3D_NAME</source>
1704       <translation>Polyline 3d name</translation>
1705     </message>
1706     <message>
1707       <source>NAME</source>
1708       <translation>Name</translation>
1709     </message>
1710     <message>
1711       <source>PARAMETERS</source>
1712       <translation>Parameters</translation>
1713     </message>
1714     <message>
1715       <source>POLYLINE</source>
1716       <translation>Polyline</translation>
1717     </message>
1718     <message>
1719       <source>PROFILE</source>
1720       <translation>Profile</translation>
1721     </message>
1722     <message>
1723       <source>BATH</source>
1724       <translation>Bathymetry</translation>
1725     </message>
1726   </context>
1727
1728   <context>
1729     <name>HYDROGUI_ViewerDlg</name>
1730     <message>
1731       <source>UZ_COORDINATES_INFO</source>
1732       <translation>U: %1, Z: %2</translation>
1733     </message>
1734   </context>
1735
1736   <context>
1737     <name>HYDROGUI_ProfileDlg</name>
1738     <message>
1739       <source>ADD_ELEMENT</source>
1740       <translation>Add element</translation>
1741     </message>
1742     <message>
1743       <source>EDIT_ELEMENT</source>
1744       <translation>Edit element</translation>
1745     </message>
1746     <message>
1747       <source>PROFILE_NAME_TLT</source>
1748       <translation>Name</translation>
1749     </message>
1750     <message>
1751       <source>U_TITLE</source>
1752       <translation>U</translation>
1753     </message>
1754     <message>
1755       <source>Z_TITLE</source>
1756       <translation>Z</translation>
1757     </message>
1758   </context>
1759
1760   <context>
1761     <name>HYDROGUI_TwoImagesDlg</name>
1762     <message>
1763       <source>BACKGROUND</source>
1764       <translation>Background</translation>
1765     </message>
1766     <message>
1767       <source>COLOR</source>
1768       <translation>Color</translation>
1769     </message>
1770     <message>
1771       <source>IMAGE</source>
1772       <translation>Image</translation>
1773     </message>
1774     <message>
1775       <source>IMAGE_1</source>
1776       <translation>Image 1</translation>
1777     </message>
1778     <message>
1779       <source>IMAGE_2</source>
1780       <translation>Image 2</translation>
1781     </message>
1782     <message>
1783       <source>IMAGE_NAME</source>
1784       <translation>Image name</translation>
1785     </message>
1786     <message>
1787       <source>MODIFY_SELECTED_IMAGE</source>
1788       <translation>Modify selected image</translation>
1789     </message>
1790     <message>
1791       <source>NAME</source>
1792       <translation>Name</translation>
1793     </message>
1794     <message>
1795       <source>PARAMETERS</source>
1796       <translation>Parameters</translation>
1797     </message>
1798     <message>
1799       <source>POLYLINE</source>
1800       <translation>Polyline</translation>
1801     </message>
1802     <message>
1803       <source>TRANSPARENT</source>
1804       <translation>Transparent</translation>
1805     </message>
1806   </context>
1807
1808   <context>
1809     <name>HYDROGUI_TwoImagesOp</name>
1810     <message>
1811       <source>CUT</source>
1812       <translation>Cut</translation>
1813     </message>
1814     <message>
1815       <source>CUT_IMAGES</source>
1816       <translation>Cut images</translation>
1817     </message>
1818     <message>
1819       <source>EDIT_CUT_IMAGE</source>
1820       <translation>Edit cut image</translation>
1821     </message>
1822     <message>
1823       <source>EDIT_FUSED_IMAGE</source>
1824       <translation>Edit fused image</translation>
1825     </message>
1826     <message>
1827       <source>EDIT_SPLITTED_IMAGE</source>
1828       <translation>Edit split image</translation>
1829     </message>
1830     <message>
1831       <source>FUSE</source>
1832       <translation>Fuse</translation>
1833     </message>
1834     <message>
1835       <source>FUSE_IMAGES</source>
1836       <translation>Fuse images</translation>
1837     </message>
1838     <message>
1839       <source>SPLIT</source>
1840       <translation>Split</translation>
1841     </message>
1842     <message>
1843       <source>SPLIT_IMAGE</source>
1844       <translation>Split image</translation>
1845     </message>
1846     <message>
1847       <source>OBJECT_ALREADY_SELECTED</source>
1848       <translation>The object "%1" has been already selected. Please select another one to perform the operation.</translation>
1849     </message>
1850   </context>
1851
1852   <context>
1853     <name>HYDROGUI_UpdateImageOp</name>
1854     <message>
1855       <source>UPDATE_IMAGE</source>
1856       <translation>Update image</translation>
1857     </message>
1858   </context>
1859
1860   <context>
1861     <name>HYDROGUI_VisualStateOp</name>
1862     <message>
1863       <source>LOAD_VISUAL_STATE</source>
1864       <translation>Load visual state</translation>
1865     </message>
1866     <message>
1867       <source>SAVE_VISUAL_STATE</source>
1868       <translation>Save visual state</translation>
1869     </message>
1870   </context>
1871
1872   <context>
1873     <name>HYDROGUI_ImmersibleZoneDlg</name>
1874     <message>
1875       <source>NAME</source>
1876       <translation>Name</translation>
1877     </message>
1878     <message>
1879       <source>ZONE_BATHYMETRY</source>
1880       <translation>Bathymetry</translation>
1881     </message>
1882     <message>
1883       <source>ZONE_NAME</source>
1884       <translation>Zone name</translation>
1885     </message>
1886     <message>
1887       <source>ZONE_PARAMETERS</source>
1888       <translation>Parameters</translation>
1889     </message>
1890     <message>
1891       <source>ZONE_POLYLINE</source>
1892       <translation>Polyline</translation>
1893     </message>
1894   </context>
1895
1896   <context>
1897     <name>HYDROGUI_ImmersibleZoneOp</name>
1898     <message>
1899       <source>CREATE_IMMERSIBLE_ZONE</source>
1900       <translation>Create immersible zone</translation>
1901     </message>
1902     <message>
1903       <source>EDIT_IMMERSIBLE_ZONE</source>
1904       <translation>Edit immersible zone</translation>
1905     </message>
1906     <message>
1907       <source>ZONE_OBJECT_CANNOT_BE_CREATED</source>
1908       <translation>Zone object can not be created</translation>
1909     </message>
1910   </context>
1911
1912   <context>
1913     <name>HYDROGUI_LocalCSOp</name>
1914     <message>
1915       <source>EDIT_LOCAL_CS</source>
1916       <translation>Local CS transformation</translation>
1917     </message>
1918   </context>
1919
1920   <context>
1921     <name>HYDROGUI_ImportGeomObjectOp</name>
1922     <message>
1923       <source>IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
1924       <translation>Import GEOM object as obstacle</translation>
1925     </message>
1926     <message>
1927       <source>IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
1928       <translation>Import GEOM object as polyline</translation>
1929     </message>
1930     <message>
1931       <source>NO_GEOM_OBJECT_TO_IMPORT</source>
1932       <translation>No GEOM object(s) to import.</translation>
1933     </message>
1934     <message>
1935       <source>POLYLINE_IS_UNRECOGNIZED_TLT</source>
1936       <translation>Imported curve has an unsupported format</translation>
1937     </message>
1938     <message>
1939       <source>POLYLINE_IS_UNRECOGNIZED_MSG</source>
1940       <translation>Imported curve has an unsupported by HYDRO format,
1941 it will be unavailable for future editing.
1942 Do you still want to continue?</translation>
1943     </message>
1944   </context>
1945
1946   <context>
1947     <name>HYDROGUI_ImportObstacleFromFileOp</name>
1948     <message>
1949       <source>IMPORT_OBSTACLE_FROM_FILE</source>
1950       <translation>Import obstacle</translation>
1951     </message>
1952     <message>
1953       <source>BAD_IMPORTED_OBSTACLE_FILE</source>
1954       <translation>'%1'
1955 file cannot be correctly imported for an Obstacle definition.</translation>
1956     </message>
1957   </context>
1958
1959   <context>
1960     <name>HYDROGUI_ExportCalculationOp</name>
1961     <message>
1962       <source>EXPORT_CALCULATION</source>
1963       <translation>Export calculation case</translation>
1964     </message>
1965     <message>
1966       <source>EXPORT_STATUS</source>
1967       <translation>Export status</translation>
1968     </message>
1969     <message>
1970       <source>EXPORT_FINISHED</source>
1971       <translation>Export finished successfully.</translation>
1972     </message>
1973     <message>
1974       <source>EXPORT_FAILED</source>
1975       <translation>Export of calculation case failed:</translation>
1976     </message>
1977     <message>
1978       <source>EXPORT_DATA_FAILED</source>
1979       <translation>parameters of calculation case are invalid.</translation>
1980     </message>
1981     <message>
1982       <source>NULL_DATA_OBJECT</source>
1983       <translation>data model object is null pointer.</translation>
1984     </message>
1985     <message>
1986       <source>RESULT_SHAPE_NULL</source>
1987       <translation>shape of calculation case regions is empty.</translation>
1988     </message>
1989     <message>
1990       <source>IMPOSSIBLE_TO_CREATE_GEOM_SHAPE</source>
1991       <translation>something was wrong during publishing of GEOM shape.</translation>
1992     </message>
1993     <message>
1994       <source>OBJ_PREFIX</source>
1995       <translation>HYDRO_</translation>
1996     </message>
1997   </context>
1998
1999   <context>
2000     <name>HYDROGUI_GeomObjectDlg</name>
2001     <message>
2002       <source>GET_SHAPE_FROM_FILE</source>
2003       <translation>Get shape from file</translation>
2004     </message>
2005     <message>
2006       <source>IMPORT_OBSTACLE_FROM_FILE</source>
2007       <translation>Import obstacle</translation>
2008     </message>
2009     <message>
2010       <source>FILE_NAME</source>
2011       <translation>File name</translation>
2012     </message>
2013     <message>
2014       <source>OBJECT_NAME</source>
2015       <translation>%1 name</translation>
2016     </message>
2017     <message>
2018       <source>NAME</source>
2019       <translation>Name</translation>
2020     </message>
2021     <message>
2022       <source>MODE</source>
2023       <translation>Mode</translation>
2024     </message>
2025     <message>
2026       <source>CREATE_NEW</source>
2027       <translation>Create new</translation>
2028     </message>
2029     <message>
2030       <source>MODIFY</source>
2031       <translation>Modify</translation>
2032     </message>
2033     <message>
2034       <source>OBJECT_TO_EDIT</source>
2035       <translation>%1 to edit</translation>
2036     </message>
2037   </context>
2038
2039   <context>
2040     <name>HYDROGUI_ImportProfilesOp</name>
2041     <message>
2042       <source>IMPORT_PROFILES</source>
2043       <translation>Import profiles</translation>
2044     </message>
2045     <message>
2046       <source>PROFILE_FILTER</source>
2047       <translation>All files (*.* *)</translation>
2048     </message>
2049     <message>
2050       <source>BAD_PROFILE_IDS</source>
2051       <translation>numbers of bad profiles</translation>
2052     </message>
2053     <message>
2054       <source>BAD_IMPORTED_PROFILES_FILES_TLT</source>
2055       <translation>Profiles import error</translation>
2056     </message>
2057     <message>
2058       <source>NO_ONE_PROFILE_IMPORTED</source>
2059       <translation>No one profile has been import from selected file(s).</translation>
2060     </message>
2061     <message>
2062       <source>BAD_IMPORTED_PROFILES_FILES</source>
2063       <translation>The data from following files cannot be completely imported:
2064 %1
2065 </translation>
2066     </message>
2067   </context>
2068
2069   <context>
2070     <name>HYDROGUI_ImportPolylineOp</name>
2071     <message>
2072       <source>IMPORT_POLYLINE</source>
2073       <translation>Import Polyline</translation>
2074     </message>
2075     <message>
2076       <source>POLYLINE_FILTER</source>
2077       <translation>SinusX Files (*.sx);;Shape files (*.shp)</translation>
2078     </message>
2079     <message>
2080       <source>BAD_IMPORTED_POLYLINE_FILES_TLT</source>
2081       <translation>Polyline import error</translation>
2082     </message>
2083     <message>
2084       <source>NO_ONE_POLYLINE_IMPORTED</source>
2085       <translation>Polyline cannot be read from seleted file</translation>
2086     </message>
2087     <message>
2088       <source>BAD_IMPORTED_POLYLINE_FILES</source>
2089       <translation>The data from following files cannot be completely imported:
2090 %1
2091 </translation>
2092     </message>
2093
2094   </context>
2095
2096
2097   <context>
2098     <name>HYDROGUI_GeoreferencementDlg</name>
2099     <message>
2100       <source>PROFILES</source>
2101       <translation>Profiles</translation>
2102     </message>
2103     <message>
2104       <source>ALL_MODE</source>
2105       <translation>All</translation>
2106     </message>
2107     <message>
2108       <source>SELECTED_MODE</source>
2109       <translation>Selected</translation>
2110     </message>
2111     <message>
2112       <source>UPDATE_SELECTION</source>
2113       <translation>Update selection</translation>
2114     </message>
2115     <message>
2116       <source>PROFILE_HEADER</source>
2117       <translation>Profile</translation>
2118     </message>
2119     <message>
2120       <source>XG_HEADER</source>
2121       <translation>Xg</translation>
2122     </message>
2123     <message>
2124       <source>YG_HEADER</source>
2125       <translation>Yg</translation>
2126     </message>
2127     <message>
2128       <source>XD_HEADER</source>
2129       <translation>Xd</translation>
2130     </message>
2131     <message>
2132       <source>YD_HEADER</source>
2133       <translation>Yd</translation>
2134     </message>
2135   </context>
2136
2137   <context>
2138     <name>HYDROGUI_GeoreferencementOp</name>
2139     <message>
2140       <source>PROFILES_GEOREFERENCEMENT</source>
2141       <translation>Profiles georeferencement</translation>
2142     </message>
2143     <message>
2144       <source>INCOMPLETE_DATA</source>
2145       <translation>Incomplete data is set for '%1'.</translation>
2146     </message>
2147     <message>
2148       <source>CONFIRMATION</source>
2149       <translation>Confirmation</translation>
2150     </message>
2151     <message>
2152       <source>CONFIRM_STORE</source>
2153       <translation>Do you want to store table data in the data model?</translation>
2154     </message>
2155   </context>
2156
2157   <context>
2158     <name>HYDROGUI_SetColorOp</name>
2159     <message>
2160       <source>SET_COLOR</source>
2161       <translation>Set color</translation>
2162     </message>
2163   </context>
2164
2165   <context>
2166     <name>HYDROGUI_ColorDlg</name>
2167     <message>
2168       <source>COLOR</source>
2169       <translation>Color</translation>
2170     </message>
2171     <message>
2172       <source>FILLING_COLOR</source>
2173       <translation>Filling color</translation>
2174     </message>
2175     <message>
2176       <source>OBJECT_COLOR</source>
2177       <translation>Object color</translation>
2178     </message>
2179     <message>
2180       <source>TRANSPARENT</source>
2181       <translation>Transparent</translation>
2182     </message>
2183     <message>
2184       <source>BORDER_COLOR</source>
2185       <translation>Border</translation>
2186     </message>
2187   </context>
2188
2189   <context>
2190     <name>HYDROGUI_StreamDlg</name>
2191     <message>
2192       <source>NAME</source>
2193       <translation>Name</translation>
2194     </message>
2195     <message>
2196       <source>STREAM_NAME</source>
2197       <translation>Stream name</translation>
2198     </message>
2199     <message>
2200       <source>STREAM_PARAMETERS</source>
2201       <translation>Parameters</translation>
2202     </message>
2203     <message>
2204       <source>STREAM_HYDRAULIC_AXIS</source>
2205       <translation>Hydraulic axis</translation>
2206     </message>
2207     <message>
2208       <source>ADD</source>
2209       <translation>Add</translation>
2210     </message>
2211     <message>
2212       <source>REMOVE</source>
2213       <translation>Remove</translation>
2214     </message>
2215   </context>
2216
2217   <context>
2218     <name>HYDROGUI_StreamOp</name>
2219     <message>
2220       <source>CREATE_STREAM</source>
2221       <translation>Create stream</translation>
2222     </message>
2223     <message>
2224       <source>EDIT_STREAM</source>
2225       <translation>Edit stream</translation>
2226     </message>
2227     <message>
2228       <source>DEFAULT_STREAM_NAME</source>
2229       <translation>Stream</translation>
2230     </message>
2231     <message>
2232       <source>WARNING</source>
2233       <translation>Warning</translation>
2234     </message>
2235     <message>
2236       <source>IGNORED_PROFILES</source>
2237       <translation>The following profile(s) will be ignored:</translation>
2238     </message>
2239     <message>
2240       <source>INVALID_PROFILES</source>
2241       <translation>Invalid profiles:
2242 %1</translation>
2243     </message>
2244     <message>
2245       <source>EXISTING_PROFILES</source>
2246       <translation>Existing profiles:
2247 %1</translation>
2248     </message>
2249     <message>
2250       <source>NOT_INTERSECTED_PROFILES</source>
2251       <translation>Not intersected with the hydraulic axis:
2252 %1</translation>
2253     </message>
2254     <message>
2255       <source>AXIS_NOT_DEFINED</source>
2256       <translation>Hydraulic axis is not defiled.</translation>
2257     </message>
2258     <message>
2259       <source>PROFILES_NOT_DEFINED</source>
2260       <translation>At least 2 profiles should be defined.</translation>
2261     </message>
2262     <message>
2263       <source>CONFIRMATION</source>
2264       <translation>Confirmation</translation>
2265     </message>
2266     <message>
2267       <source>CONFIRM_AXIS_CHANGE</source>
2268       <translation>The following profiles don't intersect the axis:
2269 %1
2270
2271 Do you want to remove these profiles and continue?</translation>
2272     </message>
2273     <message>
2274       <source>BAD_SELECTED_POLYLINE_TLT</source>
2275       <translation>Polyline is not appropriate for channel creation</translation>
2276     </message>
2277     <message>
2278       <source>BAD_SELECTED_POLYLINE_MSG</source>
2279       <translation>Polyline '%1' can not be used as hydraulic axis for channel.
2280 Polyline should consist from one not closed curve.</translation>
2281     </message>
2282   </context>
2283
2284   <context>
2285     <name>HYDROGUI_ChannelDlg</name>
2286     <message>
2287       <source>NAME</source>
2288       <translation>Name</translation>
2289     </message>
2290     <message>
2291       <source>CHANNEL_NAME</source>
2292       <translation>Channel name</translation>
2293     </message>
2294     <message>
2295       <source>CHANNEL_PARAMETERS</source>
2296       <translation>Parameters</translation>
2297     </message>
2298     <message>
2299       <source>CHANNEL_GUIDE_LINE</source>
2300       <translation>Guide line</translation>
2301     </message>
2302     <message>
2303       <source>CHANNEL_PROFILE</source>
2304       <translation>Profile</translation>
2305     </message>
2306   </context>
2307
2308   <context>
2309     <name>HYDROGUI_ChannelOp</name>
2310     <message>
2311       <source>CREATE_CHANNEL</source>
2312       <translation>Create channel</translation>
2313     </message>
2314     <message>
2315       <source>EDIT_CHANNEL</source>
2316       <translation>Edit channel</translation>
2317     </message>
2318     <message>
2319       <source>DEFAULT_CHANNEL_NAME</source>
2320       <translation>Channel</translation>
2321     </message>
2322     <message>
2323       <source>GUIDE_LINE_IS_NOT_SELECTED</source>
2324       <translation>Guide line is not chosen</translation>
2325     </message>
2326     <message>
2327       <source>PROFILE_IS_NOT_SELECTED</source>
2328       <translation>Profile is not chosen</translation>
2329     </message>
2330   </context>
2331   <context>
2332     <name>HYDROGUI_DigueDlg</name>
2333     <message>
2334       <source>DIGUE_NAME</source>
2335       <translation>Digue name</translation>
2336     </message>
2337   </context>
2338
2339   <context>
2340     <name>HYDROGUI_DigueOp</name>
2341     <message>
2342       <source>CREATE_DIGUE</source>
2343       <translation>Create digue</translation>
2344     </message>
2345     <message>
2346       <source>EDIT_DIGUE</source>
2347       <translation>Edit digue</translation>
2348     </message>
2349     <message>
2350       <source>DEFAULT_DIGUE_NAME</source>
2351       <translation>Digue</translation>
2352     </message>
2353   </context>
2354
2355   <context>
2356     <name>HYDROGUI_StricklerTableDlg</name>
2357     <message>
2358       <source>IMPORT_STRICKLER_TABLE_FILE</source>
2359       <translation>Import Strickler table file</translation>
2360     </message>
2361     <message>
2362       <source>EXPORT_STRICKLER_TABLE_FILE</source>
2363       <translation>Export Strickler table file</translation>
2364     </message>
2365     <message>
2366       <source>FILE_NAME</source>
2367       <translation>File name</translation>
2368     </message>
2369     <message>
2370       <source>STRICKLER_TABLE_NAME</source>
2371       <translation>Strickler table name</translation>
2372     </message>
2373     <message>
2374       <source>NAME</source>
2375       <translation>Name</translation>
2376     </message>
2377     <message>
2378       <source>DEFAULT_STRICKLER_TABLE_NAME</source>
2379       <translation>Strickler table</translation>
2380     </message>
2381     <message>
2382       <source>STRICKLER_TABLE_TABLE</source>
2383       <translation>Strickler table definition</translation>
2384     </message>
2385     <message>
2386       <source>ADD</source>
2387       <translation>Add</translation>
2388     </message>
2389     <message>
2390       <source>REMOVE</source>
2391       <translation>Remove</translation>
2392     </message>
2393     <message>
2394       <source>CLEAR_ALL</source>
2395       <translation>Clear all</translation>
2396     </message>
2397     <message>
2398       <source>STRICKLER_TYPE</source>
2399       <translation>Type</translation>
2400     </message>
2401     <message>
2402       <source>STRICKLER_COEFFICIENT</source>
2403       <translation>Coefficient</translation>
2404     </message>
2405   </context>
2406
2407   <context>
2408     <name>HYDROGUI_StricklerTableOp</name>
2409     <message>
2410       <source>IMPORT_STRICKLER_TABLE</source>
2411       <translation>Import Strickler table</translation>
2412     </message>
2413     <message>
2414       <source>EXPORT_STRICKLER_TABLE</source>
2415       <translation>Export Strickler table</translation>
2416     </message>
2417     <message>
2418       <source>EDIT_STRICKLER_TABLE</source>
2419       <translation>Edit Strickler table</translation>
2420     </message>
2421     <message>
2422       <source>SELECT_STRICKLER_TABLE_FILE</source>
2423       <translation>The Strickler table file is not chosen</translation>
2424     </message>
2425   </context>
2426
2427   <context>
2428     <name>HYDROGUI_LandCoverDlg</name>
2429     <message>
2430       <source>DEFAULT_LAND_COVER_NAME</source>
2431       <translation>Land cover</translation>
2432     </message>
2433     <message>
2434       <source>LAND_COVER_NAME</source>
2435       <translation>Land cover name</translation>
2436     </message>
2437     <message>
2438       <source>NAME</source>
2439       <translation>Name</translation>
2440     </message>
2441     <message>
2442       <source>LAND_COVER_PARAMETERS</source>
2443       <translation>Parameters</translation>
2444     </message>
2445     <message>
2446       <source>LAND_COVER_POLYLINES</source>
2447       <translation>Polylines</translation>
2448     </message>
2449     <message>
2450       <source>LAND_COVER_STRICKLER_TYPE</source>
2451       <translation>Strickler type</translation>
2452     </message>
2453   </context>
2454
2455   <context>
2456     <name>HYDROGUI_LandCoverOp</name>
2457     <message>
2458       <source>CREATE_LAND_COVER</source>
2459       <translation>Create land cover</translation>
2460     </message>
2461     <message>
2462       <source>EDIT_LAND_COVER</source>
2463       <translation>Edit land cover</translation>
2464     </message>
2465     <message>
2466       <source>SELECT_STRICKLER_TABLE_FILE</source>
2467       <translation>The Strickler table file is not chosen</translation>
2468     </message>
2469   </context>
2470
2471   <context>
2472     <name>HYDROGUI_TranslateObstacleDlg</name>
2473     <message>
2474       <source>OBSTACLE_NAME</source>
2475       <translation>Obstacle name</translation>
2476     </message>
2477     <message>
2478       <source>NAME</source>
2479       <translation>Name</translation>
2480     </message>
2481     <message>
2482       <source>TRANSLATION_ARGUMENTS</source>
2483       <translation>Arguments</translation>
2484     </message>
2485     <message>
2486       <source>DX</source>
2487       <translation>Dx</translation>
2488     </message>
2489     <message>
2490       <source>DY</source>
2491       <translation>Dy</translation>
2492     </message>
2493     <message>
2494       <source>DZ</source>
2495       <translation>Dz</translation>
2496     </message>
2497   </context>
2498
2499   <context>
2500     <name>HYDROGUI_TranslateObstacleOp</name>
2501     <message>
2502       <source>TRANSLATE_OBSTACLE</source>
2503       <translation>Translation of an obstacle</translation>
2504     </message>
2505   </context>
2506
2507
2508   <context>
2509     <name>HYDROGUI_RunBrowser</name>
2510     <message>
2511         <source>EXTERNAL_BROWSER_CANNOT_SHOW_PAGE</source>
2512         <translation>External browser &quot;%1&quot; can not show help page &quot;%2&quot;. You could change it in preferences.</translation>
2513     </message>
2514     <message>
2515         <source>WRN_DEFINE_EXTERNAL_BROWSER</source>
2516         <translation>External browser is not found. Do you want to define it in preferences?</translation>
2517     </message>
2518   </context>
2519
2520   <context>
2521     <name>HYDROGUI_ZLevelsDlg</name>
2522     <message>
2523         <source>CHANGE_LAYER_ORDER</source>
2524         <translation>Change layer order</translation>
2525     </message>
2526     <message>
2527         <source>ALL_OBJECTS</source>
2528         <translation>All objects</translation>
2529     </message>
2530     <message>
2531         <source>ALL_OBJECTS_UNCHECKED_TLT</source>
2532         <translation>Include hidden objects to the list</translation>
2533     </message>
2534     <message>
2535         <source>ALL_OBJECTS_CHECKED_TLT</source>
2536         <translation>Exclude hidden objects from the list</translation>
2537     </message>
2538     <message>
2539       <source>APPLY_AND_CLOSE</source>
2540       <translation>Apply and Close</translation>
2541     </message>
2542     <message>
2543         <source>APPLY</source>
2544         <translation>Apply</translation>
2545     </message>
2546     <message>
2547         <source>CLOSE</source>
2548         <translation>Close</translation>
2549     </message>
2550   </context>
2551
2552   <context>
2553     <name>HYDROGUI_OrderedListWidget</name>
2554     <message>
2555         <source>TOP_TLT</source>
2556         <translation>Move the item(s) on top</translation>
2557     </message>
2558     <message>
2559         <source>UP_TLT</source>
2560         <translation>Move the item(s) up</translation>
2561     </message>
2562     <message>
2563         <source>DOWN_TLT</source>
2564         <translation>Move the item(s) down</translation>
2565     </message>
2566     <message>
2567         <source>BOTTOM_TLT</source>
2568         <translation>Move the item(s) on bottom</translation>
2569     </message>
2570   </context>
2571
2572   <context>
2573     <name>HYDROGUI_PriorityWidget</name>
2574     <message>
2575       <source>ADD</source>
2576       <translation>Add</translation>
2577     </message>
2578     <message>
2579       <source>REMOVE</source>
2580       <translation>Remove</translation>
2581     </message>
2582     <message>
2583       <source>CLEAR_ALL</source>
2584       <translation>Clear all</translation>
2585     </message>
2586     <message>
2587       <source>INCORRECT_INPUT</source>
2588       <translation>Incorrect input</translation>
2589     </message>
2590   </context>
2591
2592   <context>
2593     <name>HYDROGUI_PriorityTableModel</name>
2594     <message>
2595       <source>LESS</source>
2596       <translation>&lt;</translation>
2597     </message>
2598     <message>
2599       <source>GREATER</source>
2600       <translation>&gt;</translation>
2601     </message>
2602     <message>
2603       <source>PRIORITY</source>
2604       <translation>Priority</translation>
2605     </message>
2606     <message>
2607       <source>ZMIN</source>
2608       <translation>Zmin</translation>
2609     </message>
2610     <message>
2611       <source>ZMAX</source>
2612       <translation>Zmax</translation>
2613     </message>
2614     <message>
2615       <source>OBJECT1</source>
2616       <translation>Object 1</translation>
2617     </message>
2618     <message>
2619       <source>OBJECT2</source>
2620       <translation>Object 2</translation>
2621     </message>
2622     <message>
2623       <source>BATHYMETRY</source>
2624       <translation>Bathymetry</translation>
2625     </message>
2626     <message>
2627       <source>ALREADY_EXISTS</source>
2628       <translation>The selected objects combination already exists.</translation>
2629     </message>
2630   </context>
2631
2632   <context>
2633     <name>HYDROGUI_RiverBottomDlg</name>
2634     <message>
2635       <source>STREAM_OBJECT</source>
2636       <translation>Stream object</translation>
2637     </message>
2638   </context>
2639
2640   <context>
2641     <name>HYDROGUI_RiverBottomOp</name>
2642     <message>
2643       <source>FIND_STREAM_BOTTOM</source>
2644       <translation>Find stream bottom</translation>
2645     </message>
2646   </context>
2647
2648   <context>
2649     <name>HYDROGUI_ProfileInterpolateDlg</name>
2650     <message>
2651       <source>STREAM_OBJECT</source>
2652       <translation>Stream object</translation>
2653     </message>
2654     <message>
2655       <source>INTERPOLATOR</source>
2656       <translation>Interpolator</translation>
2657     </message>
2658     <message>
2659       <source>DESCRIPTION</source>
2660       <translation>Description</translation>
2661     </message>
2662     <message>
2663       <source>PROFILE_1</source>
2664       <translation>Profile 1</translation>
2665     </message>
2666     <message>
2667       <source>PROFILE_2</source>
2668       <translation>Profile 2</translation>
2669     </message>
2670     <message>
2671       <source>NUMBER_OF_PROFILES</source>
2672       <translation>Number of profiles</translation>
2673     </message>
2674     <message>
2675       <source>PARAMETERS</source>
2676       <translation>Parameters</translation>
2677     </message>
2678   </context>
2679
2680   <context>
2681     <name>HYDROGUI_ProfileInterpolateOp</name>
2682     <message>
2683       <source>PROFILE_INTERPOLATION</source>
2684       <translation>Profile interpolation</translation>
2685     </message>
2686     <message>
2687       <source>INTERPOLATION_ERROR</source>
2688       <translation>Interpolation error</translation>
2689     </message>
2690     <message>
2691       <source>CALCULATE_ERROR</source>
2692       <translation>Can't perform calculation: %1</translation>
2693     </message>
2694     <message>
2695       <source>CANT_GET_STREAM_OBJECT</source>
2696       <translation>Can't obtain stream oject \"%1\"</translation>
2697     </message>
2698   </context>
2699
2700 </TS>