src/HYDROGUI/resources/HYDROGUI_msg_en.ts

   1 <!DOCTYPE TS>
   2 <TS version="1.1" >
   3
   4   <context>
   5     <name>@default</name>
   6     <message>
   7       <source>RENAME_TO</source>
   8       <translation>Rename to %1</translation>
   9     </message>
  10     <message>
  11       <source>DEFAULT_IMAGE_NAME</source>
  12       <translation>Image</translation>
  13     </message>
  14     <message>
  15       <source>DEFAULT_POLYLINE_NAME</source>
  16       <translation>Polyline</translation>
  17     </message>
  18     <message>
  19       <source>DEFAULT_OBSTACLE_NAME</source>
  20       <translation>Obstacle</translation>
  21     </message>
  22     <message>
  23       <source>DEFAULT_POLYLINE_3D_NAME</source>
  24       <translation>Polyline3D</translation>
  25     </message>
  26     <message>
  27       <source>DEFAULT_PROFILE_NAME</source>
  28       <translation>Profile</translation>
  29     </message>
  30     <message>
  31       <source>DEFAULT_VISUAL_STATE_NAME</source>
  32       <translation>Visual state</translation>
  33     </message>
  34     <message>
  35       <source>DEFAULT_BATHYMETRY_NAME</source>
  36       <translation>Bathymetry</translation>
  37     </message>
  38     <message>
  39       <source>DEFAULT_CALCULATION_CASE_NAME</source>
  40       <translation>Case</translation>
  41     </message>
  42     <message>
  43       <source>DEFAULT_IMMERSIBLE_ZONE_NAME</source>
  44       <translation>Immersible zone</translation>
  45     </message>
  46     <message>
  47       <source>DEFAULT_STRICKLER_TABLE_NAME</source>
  48       <translation>Strickler table</translation>
  49     </message>
  50     <message>
  51       <source>DEFAULT_LAND_COVER_MAP_NAME</source>
  52       <translation>Land cover map</translation>
  53     </message>
  54     <message>
  55       <source>IMAGES</source>
  56       <translation>IMAGES</translation>
  57     </message>
  58     <message>
  59       <source>POLYLINES</source>
  60       <translation>POLYLINES</translation>
  61     </message>
  62     <message>
  63       <source>POLYLINES_3D</source>
  64       <translation>POLYLINES 3D</translation>
  65     </message>
  66     <message>
  67       <source>PROFILES</source>
  68       <translation>PROFILES</translation>
  69     </message>
  70     <message>
  71       <source>VISUAL_STATES</source>
  72       <translation>VISUAL STATES</translation>
  73     </message>
  74     <message>
  75       <source>BATHYMETRIES</source>
  76       <translation>BATHYMETRIES</translation>
  77     </message>
  78     <message>
  79       <source>CALCULATION_CASES</source>
  80       <translation>CALCULATION CASES</translation>
  81     </message>
  82     <message>
  83       <source>OBSTACLES</source>
  84       <translation>OBSTACLES</translation>
  85     </message>
  86     <message>
  87       <source>STRICKLER_TABLES</source>
  88       <translation>STRICKLER TABLES</translation>
  89     </message>
  90     <message>
  91       <source>LAND_COVER_MAPS</source>
  92       <translation>LAND COVER MAPS</translation>
  93     </message>
  94     <message>
  95       <source>ARTIFICIAL_OBJECTS</source>
  96       <translation>ARTIFICIAL OBJECTS</translation>
  97     </message>
  98     <message>
  99       <source>NATURAL_OBJECTS</source>
 100       <translation>NATURAL OBJECTS</translation>
 101     </message>
 102     <message>
 103       <source>BATHYMETRY_FILTER</source>
 104       <translation>Bathymetry files (*.xyz);;ASC files (*.asc);;All files (*.* *)</translation>
 105     </message>
 106     <message>
 107       <source>CASE_BOUNDARY</source>
 108       <translation>Boundary</translation>
 109     </message>
 110     <message>
 111       <source>CASE_REFERENCE_ZONES</source>
 112       <translation>Reference zones</translation>
 113     </message>
 114     <message>
 115       <source>CASE_REGIONS</source>
 116       <translation>REGIONS</translation>
 117     </message>
 118     <message>
 119       <source>CASE_LAND_COVER_MAP</source>
 120       <translation>LAND COVER MAP</translation>
 121     </message>
 122     <message>
 123       <source>CASE_SPLIT_GROUPS</source>
 124       <translation>Split groups</translation>
 125     </message>
 126     <message>
 127       <source>FILE_CAN_NOT_BE_IMPORTED</source>
 128       <translation>The file '%1' can not be imported: format *.%2 is not supported.</translation>
 129     </message>
 130     <message>
 131       <source>FILE_NOT_EXISTS_OR_CANT_BE_READ</source>
 132       <translation>The file '%1'
 133 does not exist or you have not enough permissions to open it.</translation>
 134     </message>
 135     <message>
 136       <source>IMAGE_FILTER</source>
 137       <translation>Image files (*.bmp *.jpg *.jpeg *.png *.tif);;All files (*.* *)</translation>
 138     </message>
 139     <message>
 140       <source>INCORRECT_OBJECT_NAME</source>
 141       <translation>The object name must not be an empty string value.</translation>
 142     </message>
 143     <message>
 144       <source>EMPTY_FILENAMES</source>
 145       <translation>Files list is empty</translation>
 146     </message>
 147     <message>
 148       <source>BATHYMETRY_IMPORT_WARNING</source>
 149       <translation>Import of bahemetry - warning</translation>
 150     </message>
 151
 152     <message>
 153       <source>INSUFFICIENT_INPUT_DATA</source>
 154       <translation>Insufficient input data</translation>
 155     </message>
 156     <message>
 157       <source>INPUT_VALID_DATA</source>
 158       <translation>Please enter valid data and try again.</translation>
 159     </message>
 160     <message>
 161       <source>LOAD_ERROR</source>
 162       <translation>Study could not be loaded</translation>
 163     </message>
 164     <message>
 165       <source>SHAPE_IMAGE_ERROR</source>
 166       <translation>Image shape could not be created</translation>
 167     </message>
 168     <message>
 169       <source>IMAGE_CAN_NOT_BE_CREATED</source>
 170       <translation>It is not possible to create a presentation for OCC 3D view. </translation>
 171     </message>
 172     <message>
 173       <source>IMAGE_TRANSFORMATION_CAN_NOT_BE_APPLYED</source>
 174       <translation>The transformated image is out of range.</translation>
 175     </message>
 176     <message>
 177       <source>FILE_CAN_NOT_BE_CREATED</source>
 178       <translation>The temporary file '%1' can not be created.</translation>
 179     </message>
 180     <message>
 181       <source>OBJECT_EXISTS_IN_DOCUMENT</source>
 182       <translation>Object with name '%1' already exists in the document.</translation>
 183     </message>
 184     <message>
 185       <source>SAVE_ERROR</source>
 186       <translation>Study could not be saved</translation>
 187     </message>
 188     <message>
 189       <source>ZONE_POLYLINE</source>
 190       <translation>Polyline</translation>
 191     </message>
 192     <message>
 193       <source>ZONE_BATHYMETRY</source>
 194       <translation>Bathymetry</translation>
 195     </message>
 196     <message>
 197       <source>OBJECT_GROUPS</source>
 198       <translation>Groups</translation>
 199     </message>
 200     <message>
 201       <source>MERGE_UNKNOWN</source>
 202       <translation>Unresolved Conflict</translation>
 203     </message>
 204     <message>
 205       <source>MERGE_ZMIN</source>
 206       <translation>ZMIN</translation>
 207     </message>
 208     <message>
 209       <source>MERGE_ZMAX</source>
 210       <translation>ZMAX</translation>
 211     </message>
 212     <message>
 213       <source>NEW_REGION</source>
 214       <translation>&lt;New region&gt;</translation>
 215     </message>
 216     <message>
 217       <source>OBSTACLE_FILTER</source>
 218       <translation>BREP files (*.brep);;IGES files (*.iges *.igs);;STEP files (*.step *.stp);;
 219 All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
 220     </message>
 221     <message>
 222       <source>COORDINATES_INFO</source>
 223       <translation>Local CS: (%1, %2); Global CS: (%3, %4)</translation>
 224     </message>
 225     <message>
 226       <source>POLYLINE3D_POLYLINE</source>
 227       <translation>Polyline</translation>
 228     </message>
 229     <message>
 230       <source>POLYLINE3D_PROFILE</source>
 231       <translation>Profile</translation>
 232     </message>
 233     <message>
 234       <source>POLYLINE3D_BATHYMETRY</source>
 235       <translation>Bathymetry</translation>
 236     </message>
 237     <message>
 238       <source>CHANNEL_GUIDE_LINE</source>
 239       <translation>Guide line</translation>
 240     </message>
 241     <message>
 242       <source>CHANNEL_PROFILE</source>
 243       <translation>Profile</translation>
 244     </message>
 245     <message>
 246       <source>STREAM_HYDRAULIC_AXIS</source>
 247       <translation>Hydraulic axis</translation>
 248     </message>
 249     <message>
 250       <source>STREAM_PROFILES</source>
 251       <translation>Profiles</translation>
 252     </message>
 253     <message>
 254       <source>STREAM_WARNINGS</source>
 255       <translation>Stream Warnings</translation>
 256     </message>
 257      <message>
 258       <source>STREAM_PROJECTION_FAILED</source>
 259       <translation>Warning: Projection of banks/profiles are failed</translation>
 260     </message>
 261     <message>
 262       <source>PREF_TAB_GENERAL</source>
 263       <translation>General</translation>
 264     </message>
 265     <message>
 266       <source>PREF_GROUP_CURSOR</source>
 267       <translation>Cursor for edition operations</translation>
 268     </message>
 269     <message>
 270       <source>PREF_TYPE_OF_CURSOR</source>
 271       <translation>Type</translation>
 272     </message>
 273     <message>
 274       <source>PREF_GROUP_VIEWER</source>
 275       <translation>Viewer</translation>
 276     </message>
 277     <message>
 278       <source>PREF_VIEWER_AUTO_FITALL</source>
 279       <translation>Make automatic fit all after show object operation</translation>
 280     </message>
 281     <message>
 282       <source>PREF_GROUP_STRICKLER_TABLE</source>
 283       <translation>Strickler table</translation>
 284     </message>
 285     <message>
 286       <source>PREF_DEFAULT_STRICKLER_COEFFICIENT</source>
 287       <translation>Default Strickler coefficient</translation>
 288     </message>
 289     <message>
 290       <source>STRICKLER_TABLE_FILTER</source>
 291       <translation>Strickler table files (*.txt);;All files (*.* *)</translation>
 292     </message>
 293     <message>
 294       <source>LAND_COVER_POLYLINES</source>
 295       <translation>Polylines</translation>
 296     </message>
 297   </context>
 298
 299   <context>
 300     <name>HYDROGUI_CalculationDlg</name>
 301     <message>
 302       <source>CALCULATION_NAME</source>
 303       <translation>Calculation case name</translation>
 304     </message>
 305     <message>
 306       <source>CALCULATION_REFERENCE_OBJECTS</source>
 307       <translation>Objects</translation>
 308     </message>
 309     <message>
 310       <source>INCLUDED_OBJECTS</source>
 311       <translation>Included objects</translation>
 312     </message>
 313     <message>
 314       <source>AVAILABLE_GROUPS</source>
 315       <translation>Available groups</translation>
 316     </message>
 317     <message>
 318       <source>INCLUDED_GROUPS</source>
 319       <translation>Included groups</translation>
 320     </message>
 321     <message>
 322       <source>LIMITS</source>
 323       <translation>Limits</translation>
 324     </message>
 325     <message>
 326       <source>NAME</source>
 327       <translation>Name</translation>
 328     </message>
 329     <message>
 330       <source>BATHYMETRY</source>
 331       <translation>Bathymetry</translation>
 332     </message>
 333     <message>
 334       <source>INCLUDE</source>
 335       <translation>Include &gt;&gt;</translation>
 336     </message>
 337     <message>
 338       <source>EXCLUDE</source>
 339       <translation>Exclude &lt;&lt;</translation>
 340     </message>
 341     <message>
 342       <source>ADD</source>
 343       <translation>Add</translation>
 344     </message>
 345     <message>
 346       <source>REMOVE</source>
 347       <translation>Remove</translation>
 348     </message>
 349     <message>
 350       <source>EMPTY_GEOMETRY_OBJECTS</source>
 351       <translation>No one geometry object is selected, should be at least one.</translation>
 352     </message>
 353     <message>
 354       <source>MODE</source>
 355       <translation>Mode</translation>
 356     </message>
 357     <message>
 358       <source>AUTO</source>
 359       <translation>Auto</translation>
 360     </message>
 361     <message>
 362       <source>MANUAL</source>
 363       <translation>Manual</translation>
 364     </message>
 365     <message>
 366       <source>PRIORITY</source>
 367       <translation>Priority</translation>
 368     </message>
 369     <message>
 370       <source>STRICKLER_TABLE</source>
 371       <translation>Strickler table</translation>
 372     </message>
 373     <message>
 374       <source>LAND_COVER_MAP</source>
 375       <translation>Land cover map</translation>
 376     </message>
 377     <message>
 378       <source>STRICKLER_TYPE</source>
 379       <translation>Strickler type from land cover</translation>
 380     </message>
 381     <message>
 382       <source>RESULTS_ON_GEOMETRY_OBJECTS</source>
 383       <translation>Results on geometry objects</translation>
 384     </message>
 385     <message>
 386       <source>REGENERATE_COLORS</source>
 387       <translation>Regenerate colors</translation>
 388     </message>
 389   </context>
 390
 391   <context>
 392     <name>HYDROGUI_CalculationOp</name>
 393     <message>
 394       <source>CREATE_CALCULATION</source>
 395       <translation>Create calculation case</translation>
 396     </message>
 397     <message>
 398       <source>EDIT_CALCULATION</source>
 399       <translation>Edit calculation case</translation>
 400     </message>
 401     <message>
 402       <source>PREVIEW_CASE_ZONES</source>
 403       <translation>Preview case zones</translation>
 404     </message>
 405     <message>
 406       <source>REGIONS_CHANGED</source>
 407       <translation>Regions list modification</translation>
 408     </message>
 409     <message>
 410       <source>ORDER_CHANGED</source>
 411       <translation>Order of objects is changed</translation>
 412     </message>
 413     <message>
 414       <source>RULE_CHANGED</source>
 415       <translation>Priority rule for objects is changed</translation>
 416     </message>
 417     <message>
 418       <source>CONFIRM_SPLITTING_ZONES_RECALCULATION_REGIONS</source>
 419       <translation>Case splitting zones already exist and will be recalculated after regions list modification. Do you confirm the recalculation?</translation>
 420     </message>
 421     <message>
 422       <source>MODE_CHANGED</source>
 423       <translation>Change creation mode</translation>
 424     </message>
 425     <message>
 426       <source>CONFIRM_SPLITTING_ZONES_RECALCULATION_MODE</source>
 427       <translation>Case splitting zones already exist and will be recalculated after mode change. Do you confirm the recalculation?</translation>
 428     </message>
 429     <message>
 430       <source>EMPTY_REGIONS</source>
 431       <translation>Empty regions</translation>
 432     </message>
 433     <message>
 434       <source>CONFIRM_CONTINUE_WITH_OBJECTS_NOT_INCLUDED_TO_REGION</source>
 435       <translation>Region(s): %1 do not contain any objects. Do you want to continue?</translation>
 436     </message>
 437     <message>
 438       <source>CONFIRM_LAND_COVER_PARTITION_RECALCULATION_REGIONS</source>
 439       <translation>Case land covers partition already exists and will be recalculated after regions list modification. Do you confirm the recalculation?</translation>
 440     </message>
 441     <message>
 442       <source>CONFIRM_LAND_COVER_PARTITION_RECALCULATION_MODE</source>
 443       <translation>Case land covers partition already exists and will be recalculated after mode change. Do you confirm the recalculation?</translation>
 444     </message>
 445   </context>
 446
 447   <context>
 448     <name>HYDROGUI_DataBrowser</name>
 449     <message>
 450       <source>REF_OBJECT_COLUMN</source>
 451       <translation>Ref.Object</translation>
 452     </message>
 453     <message>
 454       <source>ALTITUDE_COLUMN</source>
 455       <translation>Altitude.Object</translation>
 456     </message>
 457     <message>
 458       <source>LAND_COVER_COLUMN</source>
 459       <translation>Land cover</translation>
 460     </message>
 461     <message>
 462       <source>ZONE_TO_NEW_REGION</source>
 463       <translation>Create a new region</translation>
 464     </message>
 465   </context>
 466
 467   <context>
 468     <name>HYDROGUI_CopyPasteOp</name>
 469     <message>
 470       <source>COPY_PASTE</source>
 471       <translation>Copy/paste</translation>
 472     </message>
 473   </context>
 474
 475   <context>
 476     <name>HYDROGUI_DuplicateOp</name>
 477     <message>
 478       <source>DUPLICATE</source>
 479       <translation>Duplicate</translation>
 480     </message>
 481   </context>
 482
 483   <context>
 484     <name>HYDROGUI_CopyPastePositionOp</name>
 485     <message>
 486       <source>COPY_PASTE_VIEW_POSITION</source>
 487       <translation>Copy/paste view position</translation>
 488     </message>
 489   </context>
 490
 491   <context>
 492     <name>HYDROGUI_DeleteOp</name>
 493     <message>
 494       <source>DELETE</source>
 495       <translation>Delete</translation>
 496     </message>
 497     <message>
 498       <source>DELETE_OBJECTS</source>
 499       <translation>Delete objects</translation>
 500     </message>
 501     <message>
 502       <source>DELETE_OBJECTS_IMPOSIBLE</source>
 503       <translation>One or more selected objects can not be deleted separately from parent object.</translation>
 504     </message>
 505     <message>
 506       <source>DELETED_OBJECTS_HAS_BACKREFERENCES</source>
 507       <translation>One or more selected objects are used to create another ones.
 508 First remove objects which are created on their basis.
 509
 510 %1</translation>
 511     </message>
 512     <message>
 513       <source>DELETE_OBJECT_NAME</source>
 514       <translation>"%1"</translation>
 515     </message>
 516     <message>
 517       <source>DELETE_OBJECT_IS_USED_FOR</source>
 518       <translation>Object "%1" is used for %2</translation>
 519     </message>
 520     <message>
 521       <source>DELETE_LAST_TABLE_WRN</source>
 522       <translation>You are about to delete all Strickler tables in the study.
 523 After that the study will contain only the default Strickler table.
 524 Do you want to continue?</translation>
 525     </message>
 526     <message>
 527       <source>WARNING</source>
 528       <translation>Warning</translation>
 529     </message>
 530   </context>
 531
 532   <context>
 533     <name>HYDROGUI_DeleteDlg</name>
 534     <message>
 535       <source>DELETE_OBJECTS</source>
 536       <translation>Delete objects</translation>
 537     </message>
 538     <message>
 539       <source>CONFIRM_DELETION</source>
 540       <translation>Do you really want to delete %1 object(s)?</translation>
 541     </message>
 542   </context>
 543
 544   <context>
 545     <name>HYDROGUI_ExportImageOp</name>
 546     <message>
 547       <source>EXPORT_IMAGE</source>
 548       <translation>Export image</translation>
 549     </message>
 550     <message>
 551       <source>EXPORT_IMAGE_TO_FILE</source>
 552       <translation>Export image to file</translation>
 553     </message>
 554   </context>
 555
 556   <context>
 557     <name>HYDROGUI_InputPanel</name>
 558     <message>
 559       <source>APPLY_AND_CLOSE</source>
 560       <translation>Apply and Close</translation>
 561     </message>
 562     <message>
 563       <source>APPLY</source>
 564       <translation>Apply</translation>
 565     </message>
 566     <message>
 567       <source>CANCEL</source>
 568       <translation>Cancel</translation>
 569     </message>
 570     <message>
 571       <source>CLOSE</source>
 572       <translation>Close</translation>
 573     </message>
 574     <message>
 575       <source>HELP</source>
 576       <translation>Help</translation>
 577     </message>
 578   </context>
 579
 580   <context>
 581     <name>HYDROGUI_Wizard</name>
 582     <message>
 583       <source>NEXT</source>
 584       <translation>Next &gt;</translation>
 585     </message>
 586     <message>
 587       <source>BACK</source>
 588       <translation>&lt; Back</translation>
 589     </message>
 590     <message>
 591       <source>FINISH</source>
 592       <translation>Finish</translation>
 593     </message>
 594   </context>
 595
 596   <context>
 597     <name>HYDROGUI_ImportBathymetryDlg</name>
 598     <message>
 599       <source>BATHYMETRY_NAME</source>
 600       <translation>Bathymetry name</translation>
 601     </message>
 602     <message>
 603       <source>FILE_NAMES</source>
 604       <translation>File names</translation>
 605     </message>
 606     <message>
 607       <source>IMPORT_BATHYMETRY_FROM_FILE</source>
 608       <translation>Import bathymetry from file</translation>
 609     </message>
 610     <message>
 611       <source>NAME</source>
 612       <translation>Name</translation>
 613     </message>
 614     <message>
 615       <source>INVERT_BATHYMETRY_ALTITUDES</source>
 616       <translation>Invert altitude values</translation>
 617     </message>
 618   </context>
 619
 620   <context>
 621     <name>HYDROGUI_ImportBathymetryOp</name>
 622     <message>
 623       <source>EDIT_IMPORTED_BATHYMETRY</source>
 624       <translation>Edit imported bathymetry</translation>
 625     </message>
 626     <message>
 627       <source>IMPORT_BATHYMETRY</source>
 628       <translation>Import bathymetry</translation>
 629     </message>
 630     <message>
 631       <source>BAD_IMPORTED_BATHYMETRY_FILE</source>
 632       <translation>'%1'
 633 file cannot be correctly imported for a Bathymetry definition.</translation>
 634     </message>
 635   <message>
 636       <source>BAD_IMPORTED_BATHYMETRY_FILES</source>
 637       <translation>'%1'
 638 All files cannot be correctly imported for a Bathymetry definition.</translation>
 639     </message>
 640
 641 </context>
 642
 643   <context>
 644     <name>HYDROGUI_ImportImageDlg</name>
 645     <message>
 646       <source>ACTIVATE_POINT_A_SELECTION</source>
 647       <translation>Activate point A selection</translation>
 648     </message>
 649     <message>
 650       <source>ACTIVATE_POINT_B_SELECTION</source>
 651       <translation>Activate point B selection</translation>
 652     </message>
 653     <message>
 654       <source>ACTIVATE_POINT_C_SELECTION</source>
 655       <translation>Activate point C selection</translation>
 656     </message>
 657     <message>
 658       <source>BY_REFERENCE_IMAGE</source>
 659       <translation>Choose points on the reference image</translation>
 660     </message>
 661     <message>
 662       <source>FILE_NAME</source>
 663       <translation>File name</translation>
 664     </message>
 665     <message>
 666       <source>IMAGE_NAME</source>
 667       <translation>Image name</translation>
 668     </message>
 669     <message>
 670       <source>IMPORT_IMAGE_FROM_FILE</source>
 671       <translation>Import image from file</translation>
 672     </message>
 673     <message>
 674       <source>MANUALLY_GEODESIC</source>
 675       <translation>Manually input Geographic coordinates</translation>
 676     </message>
 677     <message>
 678       <source>MANUALLY_LAMBERT93</source>
 679       <translation>Manually input Plane coordinates (Lambert93)</translation>
 680     </message>
 681     <message>
 682       <source>LAMBERT93_FROM_FILE</source>
 683       <translation>Get Plane coordinates (Lambert93) from file</translation>
 684     </message>
 685     <message>
 686       <source>IMAGE_CS</source>
 687       <translation>Image CS</translation>
 688     </message>
 689     <message>
 690       <source>GEODESIC</source>
 691       <translation>Geographic coordinates</translation>
 692     </message>
 693     <message>
 694       <source>LAMBERT93</source>
 695       <translation>Plane coordinates (Lambert93)</translation>
 696     </message>
 697     <message>
 698       <source>POINT_LATITUDE</source>
 699       <translation>Lat</translation>
 700     </message>
 701     <message>
 702       <source>POINT_LONGITUDE</source>
 703       <translation>Long</translation>
 704     </message>
 705     <message>
 706       <source>REFERENCE_IMAGE_CS</source>
 707       <translation>Reference Image CS</translation>
 708     </message>
 709     <message>
 710       <source>NAME</source>
 711       <translation>Name</translation>
 712     </message>
 713     <message>
 714       <source>TRANSFORM_IMAGE</source>
 715       <translation>Transform image</translation>
 716     </message>
 717     <message>
 718       <source>IMPORT_GEO_DATA_FROM_FILE</source>
 719       <translation>Import georeferencement data from file</translation>
 720     </message>
 721     <message>
 722       <source>IMAGE_GEOREFERENCEMENT_FILTER</source>
 723       <translation>Image georeferencement files (*.grf);;All files (*.* *)</translation>
 724     </message>
 725   </context>
 726
 727   <context>
 728     <name>HYDROGUI_ImportImageOp</name>
 729     <message>
 730       <source>EDIT_IMPORTED_IMAGE</source>
 731       <translation>Edit imported image</translation>
 732     </message>
 733     <message>
 734       <source>IMPORT_IMAGE</source>
 735       <translation>Import image</translation>
 736     </message>
 737     <message>
 738       <source>IMPORTED_IMAGE</source>
 739       <translation>Imported image</translation>
 740     </message>
 741     <message>
 742       <source>TRANSFORM_IMAGE</source>
 743       <translation>Transform image</translation>
 744     </message>
 745     <message>
 746       <source>POINTS_A_B_ARE_IDENTICAL</source>
 747       <translation>Points A, B are identical.</translation>
 748     </message>
 749     <message>
 750       <source>POINTS_A_B_C_BELONG_TO_SINGLE_LINE</source>
 751       <translation>Points A, B, C belong to a single line.</translation>
 752     </message>
 753     <message>
 754       <source>REFERENCE_IMAGE</source>
 755       <translation>Reference image</translation>
 756     </message>
 757     <message>
 758       <source>REFERENCE_IMAGE_IS_NOT_SELECTED</source>
 759       <translation>Reference image is not selected.</translation>
 760     </message>
 761     <message>
 762       <source>REFERENCE_POINTS_A_B_ARE_IDENTICAL</source>
 763       <translation>Reference points A, B are identical.</translation>
 764     </message>
 765     <message>
 766       <source>REFERENCE_POINTS_A_B_C_BELONG_TO_SINGLE_LINE</source>
 767       <translation>Reference points A, B, C belong to a single line.</translation>
 768     </message>
 769     <message>
 770       <source>TRANSFORMATION_MATRIX_CANNOT_BE_COMPUTED</source>
 771       <translation>Transformation matrix cannot be computed.</translation>
 772     </message>
 773     <message>
 774       <source>CORRECT_INPUT_DATA</source>
 775       <translation>Correct input data</translation>
 776     </message>
 777     <message>
 778       <source>CONFIRM_REMOVE_REFERENCE_FROM_IMAGE</source>
 779       <translation>The image "%1" has a reference to the current object.
 780 Would you like to remove all references from the image?</translation>
 781     </message>
 782     <message>
 783       <source>CANT_LOAD_GEOREFERENCEMENT_FILE</source>
 784       <translation>Can't load data from the image georeferencement file.</translation>
 785     </message>
 786     <message>
 787       <source>SELECT_IMAGE_NAME</source>
 788       <translation>The image name is not input</translation>
 789     </message>
 790     <message>
 791       <source>SELECT_IMAGE_FILE</source>
 792       <translation>The image file is not chosen</translation>
 793     </message>
 794   </context>
 795
 796   <context>
 797     <name>HYDROGUI_Module</name>
 798     <message>
 799       <source>DSK_CREATE_CALCULATION</source>
 800       <translation>Create calculation case</translation>
 801     </message>
 802     <message>
 803       <source>DSK_CREATE_POLYLINE</source>
 804       <translation>Create polyline</translation>
 805     </message>
 806     <message>
 807       <source>DSK_CREATE_POLYLINE_3D</source>
 808       <translation>Create polyline 3D</translation>
 809     </message>
 810     <message>
 811       <source>DSK_CREATE_PROFILE</source>
 812       <translation>Create profile</translation>
 813     </message>
 814     <message>
 815       <source>DSK_IMPORT_PROFILES</source>
 816       <translation>Import profiles from file(s)</translation>
 817     </message>
 818     <message>
 819       <source>DSK_GEOREFERENCEMENT</source>
 820       <translation>Profiles georeferencement</translation>
 821     </message>
 822     <message>
 823       <source>DSK_CREATE_IMMERSIBLE_ZONE</source>
 824       <translation>Create immersible zone</translation>
 825     </message>
 826     <message>
 827       <source>DSK_EDIT_IMMERSIBLE_ZONE</source>
 828       <translation>Edit immersible zone</translation>
 829     </message>
 830     <message>
 831       <source>DSK_CREATE_STREAM</source>
 832       <translation>Create stream</translation>
 833     </message>
 834     <message>
 835       <source>DSK_EDIT_STREAM</source>
 836       <translation>Edit stream</translation>
 837     </message>
 838     <message>
 839       <source>DSK_CREATE_CHANNEL</source>
 840       <translation>Create channel</translation>
 841     </message>
 842     <message>
 843       <source>DSK_EDIT_CHANNEL</source>
 844       <translation>Edit channel</translation>
 845     </message>
 846     <message>
 847       <source>DSK_CREATE_DIGUE</source>
 848       <translation>Create digue</translation>
 849     </message>
 850     <message>
 851       <source>DSK_EDIT_DIGUE</source>
 852       <translation>Edit digue</translation>
 853     </message>
 854     <message>
 855       <source>DSK_IMPORT_STRICKLER_TABLE</source>
 856       <translation>Import Strickler table</translation>
 857     </message>
 858     <message>
 859       <source>DSK_EXPORT_STRICKLER_TABLE</source>
 860       <translation>Export Strickler table</translation>
 861     </message>
 862     <message>
 863       <source>DSK_EDIT_STRICKLER_TABLE</source>
 864       <translation>Edit Strickler table</translation>
 865     </message>
 866     <message>
 867       <source>DSK_DUPLICATE_STRICKLER_TABLE</source>
 868       <translation>Duplicate Strickler table</translation>
 869     </message>
 870     <message>
 871       <source>DSK_CREATE_LAND_COVER_MAP</source>
 872       <translation>Create land cover map</translation>
 873     </message>
 874     <message>
 875       <source>DSK_ADD_LAND_COVER</source>
 876       <translation>Add land cover</translation>
 877     </message>
 878     <message>
 879       <source>DSK_REMOVE_LAND_COVER</source>
 880       <translation>Remove land cover</translation>
 881     </message>
 882     <message>
 883       <source>DSK_SPLIT_LAND_COVER</source>
 884       <translation>Split land cover(s)</translation>
 885     </message>
 886     <message>
 887       <source>DSK_MERGE_LAND_COVER</source>
 888       <translation>Merge land covers</translation>
 889     </message>
 890     <message>
 891       <source>DSK_CHANGE_LAND_COVER_TYPE</source>
 892       <translation>Change land cover(s) type</translation>
 893     </message>
 894     <message>
 895       <source>DSK_COPY</source>
 896       <translation>Copy</translation>
 897     </message>
 898     <message>
 899       <source>DSK_CUT_IMAGES</source>
 900       <translation>Cut images</translation>
 901     </message>
 902     <message>
 903       <source>DSK_DELETE</source>
 904       <translation>Delete</translation>
 905     </message>
 906     <message>
 907       <source>DSK_EDIT_CALCULATION</source>
 908       <translation>Edit calculation case</translation>
 909     </message>
 910     <message>
 911       <source>DSK_EXPORT_CALCULATION</source>
 912       <translation>Export calculation case to GEOM</translation>
 913     </message>
 914     <message>
 915       <source>DSK_EDIT_CUT_IMAGE</source>
 916       <translation>Edit cut image</translation>
 917     </message>
 918     <message>
 919       <source>DSK_EDIT_FUSED_IMAGE</source>
 920       <translation>Edit fused image</translation>
 921     </message>
 922     <message>
 923       <source>DSK_EDIT_IMPORTED_IMAGE</source>
 924       <translation>Edit imported image</translation>
 925     </message>
 926     <message>
 927       <source>DSK_EDIT_POLYLINE</source>
 928       <translation>Edit polyline</translation>
 929     </message>
 930     <message>
 931       <source>DSK_EDIT_POLYLINE_3D</source>
 932       <translation>Edit polyline 3D</translation>
 933     </message>
 934     <message>
 935       <source>DSK_EDIT_SPLIT_IMAGE</source>
 936       <translation>Edit split image</translation>
 937     </message>
 938     <message>
 939       <source>DSK_COPY_VIEWER_POSITION</source>
 940       <translation>Copy position</translation>
 941     </message>
 942     <message>
 943       <source>DSK_EXPORT_IMAGE</source>
 944       <translation>Export image</translation>
 945     </message>
 946     <message>
 947       <source>DSK_FUSE_IMAGES</source>
 948       <translation>Fuse images</translation>
 949     </message>
 950     <message>
 951       <source>DSK_HIDE</source>
 952       <translation>Hide</translation>
 953     </message>
 954     <message>
 955       <source>DSK_HIDE_ALL</source>
 956       <translation>Hide all</translation>
 957     </message>
 958     <message>
 959       <source>DSK_IMPORT_BATHYMETRY</source>
 960       <translation>Import bathymetry</translation>
 961     </message>
 962     <message>
 963       <source>DSK_EDIT_IMPORTED_BATHYMETRY</source>
 964       <translation>Edit imported bathymetry</translation>
 965     </message>
 966     <message>
 967       <source>DSK_BATHYMETRY_BOUNDS</source>
 968       <translation>Create boundary polyline</translation>
 969     </message>
 970     <message>
 971       <source>DSK_IMPORT_IMAGE</source>
 972       <translation>Import image</translation>
 973     </message>
 974     <message>
 975       <source>DSK_IMPORT_POLYLINE</source>
 976       <translation>Import polyline from file(s)</translation>
 977     </message>
 978     <message>
 979       <source>DSK_IMPORT_LANDCOVER_MAP</source>
 980       <translation>Import land cover map from file(s)</translation>
 981     </message>
 982     <message>
 983       <source>DSK_IMPORT_SINUSX</source>
 984       <translation>Import from SinusX</translation>
 985     </message>
 986     <message>
 987       <source>DSK_EXPORT_SINUSX</source>
 988       <translation>Export to SinusX</translation>
 989     </message>
 990     <message>
 991       <source>DSK_LOAD_VISUAL_STATE</source>
 992       <translation>Load visual state</translation>
 993     </message>
 994     <message>
 995       <source>DSK_OBSERVE_IMAGE</source>
 996       <translation>Observe image</translation>
 997     </message>
 998     <message>
 999       <source>DSK_PASTE</source>
1000       <translation>Paste</translation>
1001     </message>
1002     <message>
1003       <source>DSK_REDO</source>
1004       <translation>Redo</translation>
1005     </message>
1006     <message>
1007       <source>DSK_REMOVE_IMAGE_REFERENCE</source>
1008       <translation>Remove reference</translation>
1009     </message>
1010     <message>
1011       <source>DSK_SAVE_VISUAL_STATE</source>
1012       <translation>Save visual state</translation>
1013     </message>
1014     <message>
1015       <source>DSK_SHOW</source>
1016       <translation>Show</translation>
1017     </message>
1018     <message>
1019       <source>DSK_SHOW_ALL</source>
1020       <translation>Show all</translation>
1021     </message>
1022     <message>
1023       <source>DSK_SHOW_ONLY</source>
1024       <translation>Show only</translation>
1025     </message>
1026     <message>
1027       <source>DSK_SPLIT_IMAGE</source>
1028       <translation>Split image</translation>
1029     </message>
1030     <message>
1031       <source>DSK_SPLIT_POLYLINES</source>
1032       <translation>Split polylines</translation>
1033     </message>
1034     <message>
1035       <source>DSK_MERGE_POLYLINES</source>
1036       <translation>Merge polylines</translation>
1037     </message>
1038     <message>
1039       <source>DSK_UNDO</source>
1040       <translation>Undo</translation>
1041     </message>
1042     <message>
1043       <source>DSK_UPDATE_OBJECT</source>
1044       <translation>Update</translation>
1045     </message>
1046     <message>
1047       <source>DSK_FORCED_UPDATE_OBJECT</source>
1048       <translation>Forced update</translation>
1049     </message>
1050     <message>
1051       <source>DSK_IMPORT_OBSTACLE_FROM_FILE</source>
1052       <translation>Import obstacle from file</translation>
1053     </message>
1054     <message>
1055       <source>DSK_CREATE_BOX</source>
1056       <translation>Create box obstacle</translation>
1057     </message>
1058     <message>
1059       <source>DSK_IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
1060       <translation>Import GEOM object(s) as obstacle(s)</translation>
1061     </message>
1062     <message>
1063       <source>DSK_IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
1064       <translation>Import GEOM object(s) as polyline(s)</translation>
1065     </message>
1066     <message>
1067       <source>DSK_CREATE_CYLINDER</source>
1068       <translation>Create cylinder obstacle</translation>
1069     </message>
1070     <message>
1071       <source>DSK_TRANSLATE_OBSTACLE</source>
1072       <translation>Translate obstacle</translation>
1073     </message>
1074     <message>
1075       <source>DSK_COLOR</source>
1076       <translation>Set object color</translation>
1077     </message>
1078     <message>
1079       <source>DSK_TRANSPARENCY</source>
1080       <translation>Set object transparency</translation>
1081     </message>
1082     <message>
1083       <source>DSK_ZLEVEL</source>
1084       <translation>Change layer order</translation>
1085     </message>
1086     <message>
1087       <source>DSK_EDIT_LOCAL_CS</source>
1088       <translation>Change local CS</translation>
1089     </message>
1090     <message>
1091       <source>DSK_SUBMERSIBLE</source>
1092       <translation>Submersible</translation>
1093     </message>
1094     <message>
1095       <source>DSK_EXPORT_TO_SHAPE_FILE</source>
1096       <translation>Export</translation>
1097     </message>
1098     <message>
1099       <source>DSK_POLYLINE_EXTRACTION</source>
1100       <translation>Extracts the polyline from selected object</translation>
1101     </message>
1102
1103     <message>
1104       <source>MEN_CREATE_CALCULATION</source>
1105       <translation>Create calculation case</translation>
1106     </message>
1107     <message>
1108       <source>MEN_CREATE_POLYLINE</source>
1109       <translation>Create polyline</translation>
1110     </message>
1111     <message>
1112       <source>MEN_CREATE_POLYLINE_3D</source>
1113       <translation>Create polyline 3D</translation>
1114     </message>
1115     <message>
1116       <source>MEN_CREATE_PROFILE</source>
1117       <translation>Create profile</translation>
1118     </message>
1119     <message>
1120       <source>MEN_IMPORT_PROFILES</source>
1121       <translation>Import profiles</translation>
1122     </message>
1123     <message>
1124       <source>MEN_GEOREFERENCEMENT</source>
1125       <translation>Georeferencement</translation>
1126     </message>
1127     <message>
1128       <source>MEN_CREATE_ZONE</source>
1129       <translation>Create zone</translation>
1130     </message>
1131     <message>
1132       <source>MEN_CREATE_IMMERSIBLE_ZONE</source>
1133       <translation>Create immersible zone</translation>
1134     </message>
1135     <message>
1136       <source>MEN_EDIT_IMMERSIBLE_ZONE</source>
1137       <translation>Edit immersible zone</translation>
1138     </message>
1139     <message>
1140       <source>MEN_CREATE_STREAM</source>
1141       <translation>Create stream</translation>
1142     </message>
1143     <message>
1144       <source>MEN_EDIT_STREAM</source>
1145       <translation>Edit stream</translation>
1146     </message>
1147     <message>
1148       <source>MEN_CREATE_CHANNEL</source>
1149       <translation>Create channel</translation>
1150     </message>
1151     <message>
1152       <source>MEN_EDIT_CHANNEL</source>
1153       <translation>Edit channel</translation>
1154     </message>
1155     <message>
1156       <source>MEN_CREATE_DIGUE</source>
1157       <translation>Create digue</translation>
1158     </message>
1159     <message>
1160       <source>MEN_EDIT_DIGUE</source>
1161       <translation>Edit digue</translation>
1162     </message>
1163     <message>
1164       <source>MEN_IMPORT_STRICKLER_TABLE</source>
1165       <translation>Import Strickler table</translation>
1166     </message>
1167     <message>
1168       <source>MEN_EXPORT_STRICKLER_TABLE</source>
1169       <translation>Export Strickler table</translation>
1170     </message>
1171     <message>
1172       <source>MEN_EDIT_STRICKLER_TABLE</source>
1173       <translation>Edit Strickler table</translation>
1174     </message>
1175     <message>
1176       <source>MEN_DUPLICATE_STRICKLER_TABLE</source>
1177       <translation>Duplicate Strickler table</translation>
1178     </message>
1179     <message>
1180       <source>MEN_CREATE_LAND_COVER_MAP</source>
1181       <translation>Create land cover map</translation>
1182     </message>
1183     <message>
1184       <source>MEN_ADD_LAND_COVER</source>
1185       <translation>Add land cover</translation>
1186     </message>
1187     <message>
1188       <source>MEN_REMOVE_LAND_COVER</source>
1189       <translation>Remove land cover</translation>
1190     </message>
1191     <message>
1192       <source>MEN_SPLIT_LAND_COVER</source>
1193       <translation>Split land cover(s)</translation>
1194     </message>
1195     <message>
1196       <source>MEN_MERGE_LAND_COVER</source>
1197       <translation>Merge land covers</translation>
1198     </message>
1199     <message>
1200       <source>MEN_CHANGE_LAND_COVER_TYPE</source>
1201       <translation>Change land cover(s) type</translation>
1202     </message>
1203     <message>
1204       <source>MEN_CUT_IMAGES</source>
1205       <translation>Cut images</translation>
1206     </message>
1207     <message>
1208       <source>MEN_DELETE</source>
1209       <translation>Delete</translation>
1210     </message>
1211     <message>
1212       <source>MEN_DESK_ARTIFICIAL</source>
1213       <translation>Artificial objects</translation>
1214     </message>
1215     <message>
1216       <source>MEN_DESK_HYDRO</source>
1217       <translation>HYDRO</translation>
1218     </message>
1219     <message>
1220       <source>MEN_DESK_STREAM</source>
1221       <translation>Stream</translation>
1222     </message>
1223     <message>
1224       <source>MEN_DESK_NATURAL</source>
1225       <translation>Natural objects</translation>
1226     </message>
1227     <message>
1228       <source>MEN_DESK_OBSTACLE</source>
1229       <translation>Obstacle</translation>
1230     </message>
1231     <message>
1232       <source>MEN_DESK_PROFILE</source>
1233       <translation>Profile</translation>
1234     </message>
1235     <message>
1236       <source>MEN_DESK_IMAGE</source>
1237       <translation>Image</translation>
1238     </message>
1239     <message>
1240       <source>MEN_DESK_POLYLINE</source>
1241       <translation>Polyline</translation>
1242     </message>
1243     <message>
1244       <source>MEN_DESK_LAND_COVER_MAP</source>
1245       <translation>Land cover map</translation>
1246     </message>
1247     <message>
1248       <source>MEN_EDIT_CALCULATION</source>
1249       <translation>Edit calculation case</translation>
1250     </message>
1251     <message>
1252       <source>MEN_EXPORT_CALCULATION</source>
1253       <translation>Export calculation case</translation>
1254     </message>
1255     <message>
1256       <source>MEN_EDIT_CUT_IMAGE</source>
1257       <translation>Edit cut image</translation>
1258     </message>
1259     <message>
1260       <source>MEN_EDIT_FUSED_IMAGE</source>
1261       <translation>Edit fused image</translation>
1262     </message>
1263     <message>
1264       <source>MEN_EDIT_IMPORTED_IMAGE</source>
1265       <translation>Edit imported image</translation>
1266     </message>
1267     <message>
1268       <source>MEN_EDIT_POLYLINE</source>
1269       <translation>Edit polyline</translation>
1270     </message>
1271     <message>
1272       <source>MEN_EDIT_POLYLINE_3D</source>
1273       <translation>Edit polyline 3D</translation>
1274     </message>
1275     <message>
1276       <source>MEN_EDIT_PROFILE</source>
1277       <translation>Edit profile</translation>
1278     </message>
1279     <message>
1280       <source>MEN_EDIT_SPLIT_IMAGE</source>
1281       <translation>Edit split image</translation>
1282     </message>
1283     <message>
1284       <source>MEN_COPY_VIEWER_POSITION</source>
1285       <translation>Copy position</translation>
1286     </message>
1287     <message>
1288       <source>MEN_EXPORT_IMAGE</source>
1289       <translation>Export image</translation>
1290     </message>
1291     <message>
1292       <source>MEN_FUSE_IMAGES</source>
1293       <translation>Fuse images</translation>
1294     </message>
1295     <message>
1296       <source>MEN_HIDE</source>
1297       <translation>Hide</translation>
1298     </message>
1299     <message>
1300       <source>MEN_HIDE_ALL</source>
1301       <translation>Hide all</translation>
1302     </message>
1303     <message>
1304       <source>MEN_IMPORT_BATHYMETRY</source>
1305       <translation>Import bathymetry</translation>
1306     </message>
1307     <message>
1308       <source>MEN_EDIT_IMPORTED_BATHYMETRY</source>
1309       <translation>Edit imported bathymetry</translation>
1310     </message>
1311     <message>
1312       <source>MEN_BATHYMETRY_BOUNDS</source>
1313       <translation>Create boundary polyline</translation>
1314     </message>
1315     <message>
1316       <source>MEN_IMPORT_IMAGE</source>
1317       <translation>Import image</translation>
1318     </message>
1319     <message>
1320       <source>MEN_IMPORT_POLYLINE</source>
1321       <translation>Import polyline</translation>
1322     </message>
1323     <message>
1324       <source>MEN_IMPORT_LANDCOVER_MAP</source>
1325       <translation>Import land cover map from file(s)</translation>
1326     </message>
1327     <message>
1328       <source>MEN_IMPORT_SINUSX</source>
1329       <translation>Import from SinusX</translation>
1330     </message>
1331     <message>
1332       <source>MEN_EXPORT_SINUSX</source>
1333       <translation>Export to SinusX</translation>
1334     </message>
1335     <message>
1336       <source>MEN_LOAD_VISUAL_STATE</source>
1337       <translation>Load visual state</translation>
1338     </message>
1339     <message>
1340       <source>MEN_OBSERVE_IMAGE</source>
1341       <translation>Observe image</translation>
1342     </message>
1343     <message>
1344       <source>MEN_COPY</source>
1345       <translation>Copy</translation>
1346     </message>
1347     <message>
1348       <source>MEN_PASTE</source>
1349       <translation>Paste</translation>
1350     </message>
1351     <message>
1352       <source>MEN_REDO</source>
1353       <translation>Redo</translation>
1354     </message>
1355     <message>
1356       <source>MEN_REMOVE_IMAGE_REFERENCE</source>
1357       <translation>Remove reference</translation>
1358     </message>
1359     <message>
1360       <source>MEN_SAVE_VISUAL_STATE</source>
1361       <translation>Save visual state</translation>
1362     </message>
1363     <message>
1364       <source>MEN_SHOW</source>
1365       <translation>Show</translation>
1366     </message>
1367     <message>
1368       <source>MEN_SHOW_ALL</source>
1369       <translation>Show all</translation>
1370     </message>
1371     <message>
1372       <source>MEN_SHOW_ONLY</source>
1373       <translation>Show only</translation>
1374     </message>
1375     <message>
1376       <source>MEN_SPLIT_IMAGE</source>
1377       <translation>Split image</translation>
1378     </message>
1379     <message>
1380       <source>MEN_SPLIT_POLYLINES</source>
1381       <translation>Split polylines</translation>
1382     </message>
1383     <message>
1384       <source>MEN_MERGE_POLYLINES</source>
1385       <translation>Merge polylines</translation>
1386     </message>
1387     <message>
1388       <source>MEN_UNDO</source>
1389       <translation>Undo</translation>
1390     </message>
1391     <message>
1392       <source>MEN_UPDATE_OBJECT</source>
1393       <translation>Update</translation>
1394     </message>
1395     <message>
1396       <source>MEN_FORCED_UPDATE_OBJECT</source>
1397       <translation>Forced update</translation>
1398     </message>
1399     <message>
1400       <source>MEN_IMPORT_OBSTACLE_FROM_FILE</source>
1401       <translation>Import obstacle</translation>
1402     </message>
1403     <message>
1404       <source>MEN_IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
1405       <translation>Import as obstacle</translation>
1406     </message>
1407     <message>
1408       <source>MEN_IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
1409       <translation>Import as polyline</translation>
1410     </message>
1411     <message>
1412       <source>MEN_CREATE_BOX</source>
1413       <translation>Create box</translation>
1414     </message>
1415     <message>
1416       <source>MEN_CREATE_CYLINDER</source>
1417       <translation>Create cylinder</translation>
1418     </message>
1419     <message>
1420       <source>MEN_TRANSLATE_OBSTACLE</source>
1421       <translation>Translate</translation>
1422     </message>
1423     <message>
1424       <source>MEN_COLOR</source>
1425       <translation>Color</translation>
1426     </message>
1427     <message>
1428       <source>MEN_TRANSPARENCY</source>
1429       <translation>Transparency</translation>
1430     </message>
1431     <message>
1432       <source>MEN_ZLEVEL</source>
1433       <translation>Change layer order</translation>
1434     </message>
1435     <message>
1436       <source>MEN_EDIT_LOCAL_CS</source>
1437       <translation>Change local CS</translation>
1438     </message>
1439     <message>
1440       <source>MEN_SUBMERSIBLE</source>
1441       <translation>Submersible</translation>
1442     </message>
1443     <message>
1444       <source>MEN_EXPORT_TO_SHAPE_FILE</source>
1445       <translation>Export</translation>
1446     </message>
1447     <message>
1448       <source>MEN_POLYLINE_EXTRACTION</source>
1449       <translation>Polyline extraction</translation>
1450     </message>
1451
1452     <message>
1453       <source>STB_CREATE_CALCULATION</source>
1454       <translation>Create calculation case</translation>
1455     </message>
1456     <message>
1457       <source>STB_CREATE_POLYLINE</source>
1458       <translation>Create polyline</translation>
1459     </message>
1460     <message>
1461       <source>STB_CREATE_POLYLINE_3D</source>
1462       <translation>Create polyline 3D</translation>
1463     </message>
1464     <message>
1465       <source>STB_CREATE_PROFILE</source>
1466       <translation>Create profile</translation>
1467     </message>
1468     <message>
1469       <source>STB_IMPORT_PROFILES</source>
1470       <translation>Import profiles from file(s)</translation>
1471     </message>
1472     <message>
1473       <source>STB_GEOREFERENCEMENT</source>
1474       <translation>Profiles georeferencement</translation>
1475     </message>
1476     <message>
1477       <source>STB_CREATE_IMMERSIBLE_ZONE</source>
1478       <translation>Create immersible zone</translation>
1479     </message>
1480     <message>
1481       <source>STB_EDIT_IMMERSIBLE_ZONE</source>
1482       <translation>Edit immersible zone</translation>
1483     </message>
1484     <message>
1485       <source>STB_CREATE_STREAM</source>
1486       <translation>Create stream</translation>
1487     </message>
1488     <message>
1489       <source>STB_EDIT_STREAM</source>
1490       <translation>Edit stream</translation>
1491     </message>
1492     <message>
1493       <source>STB_CREATE_CHANNEL</source>
1494       <translation>Create channel</translation>
1495     </message>
1496     <message>
1497       <source>STB_EDIT_CHANNEL</source>
1498       <translation>Edit channel</translation>
1499     </message>
1500     <message>
1501       <source>STB_CREATE_DIGUE</source>
1502       <translation>Create digue</translation>
1503     </message>
1504     <message>
1505       <source>STB_EDIT_DIGUE</source>
1506       <translation>Edit digue</translation>
1507     </message>
1508     <message>
1509       <source>STB_IMPORT_STRICKLER_TABLE</source>
1510       <translation>Import Strickler table</translation>
1511     </message>
1512     <message>
1513       <source>STB_EXPORT_STRICKLER_TABLE</source>
1514       <translation>Export Strickler table</translation>
1515     </message>
1516     <message>
1517       <source>STB_EDIT_STRICKLER_TABLE</source>
1518       <translation>Edit Strickler table</translation>
1519     </message>
1520     <message>
1521       <source>STB_DUPLICATE_STRICKLER_TABLE</source>
1522       <translation>Duplicate Strickler table</translation>
1523     </message>
1524     <message>
1525       <source>STB_CREATE_LAND_COVER_MAP</source>
1526       <translation>Create land cover map</translation>
1527     </message>
1528     <message>
1529       <source>STB_ADD_LAND_COVER</source>
1530       <translation>Add land cover</translation>
1531     </message>
1532     <message>
1533       <source>STB_REMOVE_LAND_COVER</source>
1534       <translation>Remove land cover</translation>
1535     </message>
1536     <message>
1537       <source>STB_SPLIT_LAND_COVER</source>
1538       <translation>Split land cover(s)</translation>
1539     </message>
1540     <message>
1541       <source>STB_MERGE_LAND_COVER</source>
1542       <translation>Merge land covers</translation>
1543     </message>
1544     <message>
1545       <source>STB_CHANGE_LAND_COVER_TYPE</source>
1546       <translation>Change land cover(s) type</translation>
1547     </message>
1548     <message>
1549       <source>STB_COPY</source>
1550       <translation>Copy</translation>
1551     </message>
1552     <message>
1553       <source>STB_CUT_IMAGES</source>
1554       <translation>Cut images</translation>
1555     </message>
1556     <message>
1557       <source>STB_DELETE</source>
1558       <translation>Delete</translation>
1559     </message>
1560     <message>
1561       <source>STB_EDIT_CALCULATION</source>
1562       <translation>Edit calculation case</translation>
1563     </message>
1564     <message>
1565       <source>STB_EXPORT_CALCULATION</source>
1566       <translation>Export calculation case to GEOM</translation>
1567     </message>
1568     <message>
1569       <source>STB_EDIT_CUT_IMAGE</source>
1570       <translation>Edit cut image</translation>
1571     </message>
1572     <message>
1573       <source>STB_EDIT_FUSED_IMAGE</source>
1574       <translation>Edit fused image</translation>
1575     </message>
1576     <message>
1577       <source>STB_EDIT_IMPORTED_IMAGE</source>
1578       <translation>Edit imported image</translation>
1579     </message>
1580     <message>
1581       <source>STB_EDIT_POLYLINE</source>
1582       <translation>Edit polyline</translation>
1583     </message>
1584     <message>
1585       <source>STB_EDIT_POLYLINE_3D</source>
1586       <translation>Edit polyline 3D</translation>
1587     </message>
1588     <message>
1589       <source>STB_EDIT_SPLIT_IMAGE</source>
1590       <translation>Edit split image</translation>
1591     </message>
1592     <message>
1593       <source>STB_COPY_VIEWER_POSITION</source>
1594       <translation>Copy position</translation>
1595     </message>
1596     <message>
1597       <source>STB_EXPORT_IMAGE</source>
1598       <translation>Export image</translation>
1599     </message>
1600     <message>
1601       <source>STB_FUSE_IMAGES</source>
1602       <translation>Fuse images</translation>
1603     </message>
1604     <message>
1605       <source>STB_HIDE</source>
1606       <translation>Hide</translation>
1607     </message>
1608     <message>
1609       <source>STB_HIDE_ALL</source>
1610       <translation>Hide all</translation>
1611     </message>
1612     <message>
1613       <source>STB_IMPORT_BATHYMETRY</source>
1614       <translation>Import bathymetry</translation>
1615     </message>
1616     <message>
1617       <source>STB_EDIT_IMPORTED_BATHYMETRY</source>
1618       <translation>Edit imported bathymetry</translation>
1619     </message>
1620     <message>
1621       <source>STB_BATHYMETRY_BOUNDS</source>
1622       <translation>Create boundary polyline</translation>
1623     </message>
1624     <message>
1625       <source>STB_IMPORT_IMAGE</source>
1626       <translation>Import image</translation>
1627     </message>
1628     <message>
1629       <source>STB_IMPORT_POLYLINE</source>
1630       <translation>Import polyline</translation>
1631     </message>
1632     <message>
1633       <source>STB_IMPORT_LANDCOVER_MAP</source>
1634       <translation>Import land cover map from file(s)</translation>
1635     </message>
1636     <message>
1637       <source>STB_IMPORT_SINUSX</source>
1638       <translation>Import from SinusX</translation>
1639     </message>
1640     <message>
1641       <source>STB_EXPORT_SINUSX</source>
1642       <translation>Export to SinusX</translation>
1643     </message>
1644     <message>
1645       <source>STB_LOAD_VISUAL_STATE</source>
1646       <translation>Load visual state</translation>
1647     </message>
1648     <message>
1649       <source>STB_OBSERVE_IMAGE</source>
1650       <translation>Observe image</translation>
1651     </message>
1652     <message>
1653       <source>STB_PASTE</source>
1654       <translation>Paste</translation>
1655     </message>
1656     <message>
1657       <source>STB_REDO</source>
1658       <translation>Redo</translation>
1659     </message>
1660     <message>
1661       <source>STB_REMOVE_IMAGE_REFERENCE</source>
1662       <translation>Remove reference</translation>
1663     </message>
1664     <message>
1665       <source>STB_SAVE_VISUAL_STATE</source>
1666       <translation>Save visual state</translation>
1667     </message>
1668     <message>
1669       <source>STB_SHOW</source>
1670       <translation>Show</translation>
1671     </message>
1672     <message>
1673       <source>STB_SHOW_ALL</source>
1674       <translation>Show all</translation>
1675     </message>
1676     <message>
1677       <source>STB_SHOW_ONLY</source>
1678       <translation>Show only</translation>
1679     </message>
1680     <message>
1681       <source>STB_SPLIT_IMAGE</source>
1682       <translation>Split image</translation>
1683     </message>
1684     <message>
1685       <source>STB_SPLIT_POLYLINES</source>
1686       <translation>Split polylines</translation>
1687     </message>
1688     <message>
1689       <source>STB_MERGE_POLYLINES</source>
1690       <translation>Merge polylines</translation>
1691     </message>
1692     <message>
1693       <source>STB_UNDO</source>
1694       <translation>Undo</translation>
1695     </message>
1696     <message>
1697       <source>STB_UPDATE_OBJECT</source>
1698       <translation>Update</translation>
1699     </message>
1700     <message>
1701       <source>STB_FORCED_UPDATE_OBJECT</source>
1702       <translation>Forced update</translation>
1703     </message>
1704     <message>
1705       <source>STB_IMPORT_OBSTACLE_FROM_FILE</source>
1706       <translation>Import obstacle from file</translation>
1707     </message>
1708     <message>
1709       <source>STB_IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
1710       <translation>Import GEOM object(s) as obstacle(s)</translation>
1711     </message>
1712     <message>
1713       <source>STB_IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
1714       <translation>Import GEOM object(s) as polyline(s)</translation>
1715     </message>
1716     <message>
1717       <source>STB_CREATE_BOX</source>
1718       <translation>Create box obstacle</translation>
1719     </message>
1720     <message>
1721       <source>STB_CREATE_CYLINDER</source>
1722       <translation>Create cylinder obstacle</translation>
1723     </message>
1724     <message>
1725       <source>STB_TRANSLATE_OBSTACLE</source>
1726       <translation>Translate obstacle</translation>
1727     </message>
1728     <message>
1729       <source>STB_COLOR</source>
1730       <translation>Set object color</translation>
1731     </message>
1732     <message>
1733       <source>STB_TRANSPARENCY</source>
1734       <translation>Set object transparency</translation>
1735     </message>
1736     <message>
1737       <source>STB_ZLEVEL</source>
1738       <translation>Change layer order</translation>
1739     </message>
1740     <message>
1741       <source>STB_EDIT_LOCAL_CS</source>
1742       <translation>Change local CS</translation>
1743     </message>
1744     <message>
1745       <source>STB_POLYLINE_EXTRACTION</source>
1746       <translation>Polyline extractions</translation>
1747     </message>
1748
1749     <message>
1750       <source>MEN_CREATE_STREAM_BOTTOM</source>
1751       <translation>Find bottom</translation>
1752     </message>
1753     <message>
1754       <source>DSK_CREATE_STREAM_BOTTOM</source>
1755       <translation>Create stream bottom polyline</translation>
1756     </message>
1757     <message>
1758       <source>STB_CREATE_STREAM_BOTTOM</source>
1759       <translation>Creates the stream bottom polyline on selected stream object</translation>
1760     </message>
1761     <message>
1762       <source>STB_SUBMERSIBLE</source>
1763       <translation>If the object is submersible</translation>
1764     </message>
1765     <message>
1766       <source>STB_EXPORT_TO_SHAPE_FILE</source>
1767       <translation>Export</translation>
1768     </message>
1769
1770
1771     <message>
1772       <source>MEN_PROFILE_INTERPOLATE</source>
1773       <translation>Profiles interpolation</translation>
1774     </message>
1775     <message>
1776       <source>DSK_PROFILE_INTERPOLATE</source>
1777       <translation>Interpolate the stream profiles</translation>
1778     </message>
1779     <message>
1780       <source>STB_PROFILE_INTERPOLATE</source>
1781       <translation>Creates the new stream profiles using interpolation of selected ones</translation>
1782     </message>
1783
1784     <message>
1785       <source>MEN_RECOGNIZE_CONTOURS</source>
1786       <translation>Recognize contours</translation>
1787     </message>
1788     <message>
1789       <source>DSK_RECOGNIZE_CONTOURS</source>
1790       <translation>Recognize contours</translation>
1791     </message>
1792     <message>
1793       <source>STB_RECOGNIZE_CONTOURS</source>
1794       <translation>Recognize contours</translation>
1795     </message>
1796
1797     <message>
1798       <source>MEN_LC_SCALARMAP_COLORING_ON</source>
1799       <translation>Use as scalar scale</translation>
1800     </message>
1801     <message>
1802       <source>DSK_LC_SCALARMAP_COLORING_ON</source>
1803       <translation>Use the table as a scalar scale for Land Covers coloring</translation>
1804     </message>
1805     <message>
1806       <source>STB_LC_SCALARMAP_COLORING_ON</source>
1807       <translation>Use as scalar scale</translation>
1808     </message>
1809
1810     <message>
1811       <source>MEN_LC_SCALARMAP_COLORING_OFF</source>
1812       <translation>Scalar map mode off</translation>
1813     </message>
1814     <message>
1815       <source>DSK_LC_SCALARMAP_COLORING_OFF</source>
1816       <translation>Turn off Land Covers scalar map coloring mode</translation>
1817     </message>
1818     <message>
1819       <source>STB_LC_SCALARMAP_COLORING_OFF</source>
1820       <translation>Scalar map mode off</translation>
1821     </message>
1822
1823   </context>
1824
1825   <context>
1826     <name>HYDROGUI_PolylineOp</name>
1827     <message>
1828       <source>CREATE_POLYLINE</source>
1829       <translation>Create polyline</translation>
1830     </message>
1831     <message>
1832       <source>EDIT_POLYLINE</source>
1833       <translation>Edit polyline</translation>
1834     </message>
1835     <message>
1836       <source>EMPTY_POLYLINE_DATA</source>
1837       <translation>No one section is created for polyline, should be at least one.</translation>
1838     </message>
1839     <message>
1840       <source>NUMBER_OF_SECTION_POINTS_INCORRECT</source>
1841       <translation>Number of points in each polyline section should not be less than 2.</translation>
1842     </message>
1843     <message>
1844       <source>POLYLINE_IS_UNEDITABLE_TLT</source>
1845       <translation>Polyline can not be edited</translation>
1846     </message>
1847     <message>
1848       <source>POLYLINE_IS_UNEDITABLE_MSG</source>
1849       <translation>Polyline has an unsupported format and can not be edited.</translation>
1850     </message>
1851   </context>
1852
1853   <context>
1854     <name>HYDROGUI_Poly3DOp</name>
1855     <message>
1856       <source>CREATE_POLYLINE_3D</source>
1857       <translation>Create polyline 3D</translation>
1858     </message>
1859     <message>
1860       <source>EDIT_POLYLINE_3D</source>
1861       <translation>Edit polyline 3D</translation>
1862     </message>
1863   </context>
1864
1865   <context>
1866     <name>HYDROGUI_ProfileOp</name>
1867     <message>
1868       <source>CREATE_PROFILE</source>
1869       <translation>Create profile</translation>
1870     </message>
1871     <message>
1872       <source>EDIT_PROFILE</source>
1873       <translation>Edit profile</translation>
1874     </message>
1875     <message>
1876       <source>NUMBER_OF_PROFILE_POINTS_INCORRECT</source>
1877       <translation>Number of profile points should not be less than 2.</translation>
1878     </message>
1879   </context>
1880
1881   <context>
1882     <name>HYDROGUI_RemoveImageRefsOp</name>
1883     <message>
1884       <source>REMOVE_IMAGE_REFERENCE</source>
1885       <translation>Remove image reference</translation>
1886     </message>
1887   </context>
1888
1889   <context>
1890     <name>HYDROGUI_ShowHideOp</name>
1891     <message>
1892       <source>SHOW</source>
1893       <translation>Show</translation>
1894     </message>
1895     <message>
1896       <source>SHOW_ALL</source>
1897       <translation>Show all</translation>
1898     </message>
1899     <message>
1900       <source>SHOW_ONLY</source>
1901       <translation>Show only</translation>
1902     </message>
1903     <message>
1904       <source>HIDE</source>
1905       <translation>Hide</translation>
1906     </message>
1907     <message>
1908       <source>HIDE_ALL</source>
1909       <translation>Hide all</translation>
1910     </message>
1911   </context>
1912
1913   <context>
1914     <name>HYDROGUI_ObserveImageOp</name>
1915     <message>
1916       <source>OBSERVE_IMAGE</source>
1917       <translation>Observe image</translation>
1918     </message>
1919   </context>
1920
1921   <context>
1922     <name>HYDROGUI_PolylineDlg</name>
1923     <message>
1924       <source>ADD_ELEMENT</source>
1925       <translation>Add element</translation>
1926     </message>
1927     <message>
1928       <source>EDIT_ELEMENT</source>
1929       <translation>Edit element</translation>
1930     </message>
1931     <message>
1932       <source>POLYLINE_NAME_TLT</source>
1933       <translation>Name</translation>
1934     </message>
1935   </context>
1936
1937   <context>
1938     <name>HYDROGUI_Poly3DDlg</name>
1939     <message>
1940       <source>POLYLINE_3D_NAME</source>
1941       <translation>Polyline 3d name</translation>
1942     </message>
1943     <message>
1944       <source>NAME</source>
1945       <translation>Name</translation>
1946     </message>
1947     <message>
1948       <source>PARAMETERS</source>
1949       <translation>Parameters</translation>
1950     </message>
1951     <message>
1952       <source>POLYLINE</source>
1953       <translation>Polyline</translation>
1954     </message>
1955     <message>
1956       <source>PROFILE</source>
1957       <translation>Profile</translation>
1958     </message>
1959     <message>
1960       <source>BATH</source>
1961       <translation>Bathymetry</translation>
1962     </message>
1963   </context>
1964
1965   <context>
1966     <name>HYDROGUI_ViewerDlg</name>
1967     <message>
1968       <source>UZ_COORDINATES_INFO</source>
1969       <translation>U: %1, Z: %2</translation>
1970     </message>
1971   </context>
1972
1973   <context>
1974     <name>HYDROGUI_ProfileDlg</name>
1975     <message>
1976       <source>ADD_ELEMENT</source>
1977       <translation>Add element</translation>
1978     </message>
1979     <message>
1980       <source>EDIT_ELEMENT</source>
1981       <translation>Edit element</translation>
1982     </message>
1983     <message>
1984       <source>PROFILE_NAME_TLT</source>
1985       <translation>Name</translation>
1986     </message>
1987     <message>
1988       <source>U_TITLE</source>
1989       <translation>U</translation>
1990     </message>
1991     <message>
1992       <source>Z_TITLE</source>
1993       <translation>Z</translation>
1994     </message>
1995   </context>
1996
1997   <context>
1998     <name>HYDROGUI_TwoImagesDlg</name>
1999     <message>
2000       <source>BACKGROUND</source>
2001       <translation>Background</translation>
2002     </message>
2003     <message>
2004       <source>COLOR</source>
2005       <translation>Color</translation>
2006     </message>
2007     <message>
2008       <source>IMAGE</source>
2009       <translation>Image</translation>
2010     </message>
2011     <message>
2012       <source>IMAGE_1</source>
2013       <translation>Image 1</translation>
2014     </message>
2015     <message>
2016       <source>IMAGE_2</source>
2017       <translation>Image 2</translation>
2018     </message>
2019     <message>
2020       <source>IMAGE_NAME</source>
2021       <translation>Image name</translation>
2022     </message>
2023     <message>
2024       <source>MODIFY_SELECTED_IMAGE</source>
2025       <translation>Modify selected image</translation>
2026     </message>
2027     <message>
2028       <source>NAME</source>
2029       <translation>Name</translation>
2030     </message>
2031     <message>
2032       <source>PARAMETERS</source>
2033       <translation>Parameters</translation>
2034     </message>
2035     <message>
2036       <source>POLYLINE</source>
2037       <translation>Polyline</translation>
2038     </message>
2039     <message>
2040       <source>TRANSPARENT</source>
2041       <translation>Transparent</translation>
2042     </message>
2043   </context>
2044
2045   <context>
2046     <name>HYDROGUI_TwoImagesOp</name>
2047     <message>
2048       <source>CUT</source>
2049       <translation>Cut</translation>
2050     </message>
2051     <message>
2052       <source>CUT_IMAGES</source>
2053       <translation>Cut images</translation>
2054     </message>
2055     <message>
2056       <source>EDIT_CUT_IMAGE</source>
2057       <translation>Edit cut image</translation>
2058     </message>
2059     <message>
2060       <source>EDIT_FUSED_IMAGE</source>
2061       <translation>Edit fused image</translation>
2062     </message>
2063     <message>
2064       <source>EDIT_SPLIT_IMAGE</source>
2065       <translation>Edit split image</translation>
2066     </message>
2067     <message>
2068       <source>FUSE</source>
2069       <translation>Fuse</translation>
2070     </message>
2071     <message>
2072       <source>FUSE_IMAGES</source>
2073       <translation>Fuse images</translation>
2074     </message>
2075     <message>
2076       <source>SPLIT</source>
2077       <translation>Split</translation>
2078     </message>
2079     <message>
2080       <source>SPLIT_IMAGE</source>
2081       <translation>Split image</translation>
2082     </message>
2083     <message>
2084       <source>OBJECT_ALREADY_SELECTED</source>
2085       <translation>The object "%1" has been already selected. Please select another one to perform the operation.</translation>
2086     </message>
2087   </context>
2088
2089   <context>
2090     <name>HYDROGUI_UpdateImageOp</name>
2091     <message>
2092       <source>UPDATE_IMAGE</source>
2093       <translation>Update image</translation>
2094     </message>
2095   </context>
2096
2097   <context>
2098     <name>HYDROGUI_VisualStateOp</name>
2099     <message>
2100       <source>LOAD_VISUAL_STATE</source>
2101       <translation>Load visual state</translation>
2102     </message>
2103     <message>
2104       <source>SAVE_VISUAL_STATE</source>
2105       <translation>Save visual state</translation>
2106     </message>
2107   </context>
2108
2109   <context>
2110     <name>HYDROGUI_ImmersibleZoneDlg</name>
2111     <message>
2112       <source>NAME</source>
2113       <translation>Name</translation>
2114     </message>
2115     <message>
2116       <source>ZONE_BATHYMETRY</source>
2117       <translation>Bathymetry</translation>
2118     </message>
2119     <message>
2120       <source>ZONE_NAME</source>
2121       <translation>Zone name</translation>
2122     </message>
2123     <message>
2124       <source>ZONE_PARAMETERS</source>
2125       <translation>Parameters</translation>
2126     </message>
2127     <message>
2128       <source>ZONE_POLYLINE</source>
2129       <translation>Polyline</translation>
2130     </message>
2131   </context>
2132
2133   <context>
2134     <name>HYDROGUI_ImmersibleZoneOp</name>
2135     <message>
2136       <source>CREATE_IMMERSIBLE_ZONE</source>
2137       <translation>Create immersible zone</translation>
2138     </message>
2139     <message>
2140       <source>EDIT_IMMERSIBLE_ZONE</source>
2141       <translation>Edit immersible zone</translation>
2142     </message>
2143     <message>
2144       <source>ZONE_OBJECT_CANNOT_BE_CREATED</source>
2145       <translation>Zone object can not be created.
2146 Maybe the polyline is not closed,
2147 or there is a small loop somewhere in the polyline ?</translation>
2148     </message>
2149   </context>
2150
2151   <context>
2152     <name>HYDROGUI_LocalCSOp</name>
2153     <message>
2154       <source>EDIT_LOCAL_CS</source>
2155       <translation>Local CS transformation</translation>
2156     </message>
2157   </context>
2158
2159   <context>
2160     <name>HYDROGUI_ImportGeomObjectOp</name>
2161     <message>
2162       <source>IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
2163       <translation>Import GEOM object as obstacle</translation>
2164     </message>
2165     <message>
2166       <source>IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
2167       <translation>Import GEOM object as polyline</translation>
2168     </message>
2169     <message>
2170       <source>NO_GEOM_OBJECT_TO_IMPORT</source>
2171       <translation>No GEOM object(s) to import.</translation>
2172     </message>
2173     <message>
2174       <source>POLYLINE_IS_UNRECOGNIZED_TLT</source>
2175       <translation>Imported curve has an unsupported format</translation>
2176     </message>
2177     <message>
2178       <source>POLYLINE_IS_UNRECOGNIZED_MSG</source>
2179       <translation>Imported curve has an unsupported by HYDRO format,
2180 it will be unavailable for future editing.
2181 Do you still want to continue?</translation>
2182     </message>
2183   </context>
2184
2185   <context>
2186     <name>HYDROGUI_ImportObstacleFromFileOp</name>
2187     <message>
2188       <source>IMPORT_OBSTACLE_FROM_FILE</source>
2189       <translation>Import obstacle</translation>
2190     </message>
2191     <message>
2192       <source>BAD_IMPORTED_OBSTACLE_FILE</source>
2193       <translation>'%1'
2194 file cannot be correctly imported for an Obstacle definition.</translation>
2195     </message>
2196   </context>
2197
2198   <context>
2199     <name>HYDROGUI_ExportCalculationOp</name>
2200     <message>
2201       <source>EXPORT_CALCULATION</source>
2202       <translation>Export calculation case</translation>
2203     </message>
2204     <message>
2205       <source>EXPORT_STATUS</source>
2206       <translation>Export status</translation>
2207     </message>
2208     <message>
2209       <source>EXPORT_FINISHED</source>
2210       <translation>Export finished successfully.</translation>
2211     </message>
2212     <message>
2213       <source>EXPORT_FAILED</source>
2214       <translation>Export of calculation case failed:</translation>
2215     </message>
2216     <message>
2217       <source>EXPORT_DATA_FAILED</source>
2218       <translation>parameters of calculation case are invalid.</translation>
2219     </message>
2220     <message>
2221       <source>NULL_DATA_OBJECT</source>
2222       <translation>data model object is null pointer.</translation>
2223     </message>
2224     <message>
2225       <source>RESULT_SHAPE_NULL</source>
2226       <translation>shape of calculation case regions is empty.</translation>
2227     </message>
2228     <message>
2229       <source>IMPOSSIBLE_TO_CREATE_GEOM_SHAPE</source>
2230       <translation>something was wrong during publishing of GEOM shape.</translation>
2231     </message>
2232     <message>
2233       <source>OBJ_PREFIX</source>
2234       <translation>HYDRO_</translation>
2235     </message>
2236   </context>
2237
2238   <context>
2239     <name>HYDROGUI_GeomObjectDlg</name>
2240     <message>
2241       <source>GET_SHAPE_FROM_FILE</source>
2242       <translation>Get shape from file</translation>
2243     </message>
2244     <message>
2245       <source>IMPORT_OBSTACLE_FROM_FILE</source>
2246       <translation>Import obstacle</translation>
2247     </message>
2248     <message>
2249       <source>FILE_NAME</source>
2250       <translation>File name</translation>
2251     </message>
2252     <message>
2253       <source>OBJECT_NAME</source>
2254       <translation>%1 name</translation>
2255     </message>
2256     <message>
2257       <source>NAME</source>
2258       <translation>Name</translation>
2259     </message>
2260     <message>
2261       <source>MODE</source>
2262       <translation>Mode</translation>
2263     </message>
2264     <message>
2265       <source>CREATE_NEW</source>
2266       <translation>Create new</translation>
2267     </message>
2268     <message>
2269       <source>MODIFY</source>
2270       <translation>Modify</translation>
2271     </message>
2272     <message>
2273       <source>OBJECT_TO_EDIT</source>
2274       <translation>%1 to edit</translation>
2275     </message>
2276   </context>
2277
2278   <context>
2279     <name>HYDROGUI_ImportProfilesOp</name>
2280     <message>
2281       <source>IMPORT_PROFILES</source>
2282       <translation>Import profiles</translation>
2283     </message>
2284     <message>
2285       <source>PROFILE_FILTER</source>
2286       <translation>All files (*.* *)</translation>
2287     </message>
2288     <message>
2289       <source>BAD_PROFILE_IDS</source>
2290       <translation>numbers of bad profiles</translation>
2291     </message>
2292     <message>
2293       <source>BAD_IMPORTED_PROFILES_FILES_TLT</source>
2294       <translation>Profiles import error</translation>
2295     </message>
2296     <message>
2297       <source>NO_ONE_PROFILE_IMPORTED</source>
2298       <translation>No one profile has been import from selected file(s).</translation>
2299     </message>
2300     <message>
2301       <source>BAD_IMPORTED_PROFILES_FILES</source>
2302       <translation>The data from following files cannot be completely imported:
2303 %1
2304 </translation>
2305     </message>
2306   </context>
2307
2308   <context>
2309     <name>HYDROGUI_ImportPolylineOp</name>
2310     <message>
2311       <source>IMPORT_POLYLINE</source>
2312       <translation>Import Polyline</translation>
2313     </message>
2314     <message>
2315       <source>POLYLINE_FILTER</source>
2316       <translation>Shape files (*.shp)</translation>
2317     </message>
2318     <message>
2319       <source>BAD_IMPORTED_POLYLINE_FILES_TLT</source>
2320       <translation>Polyline import error</translation>
2321     </message>
2322     <message>
2323       <source>NO_ONE_POLYLINE_IMPORTED</source>
2324       <translation>Polyline cannot be read from seleted file</translation>
2325     </message>
2326     <message>
2327       <source>BAD_IMPORTED_POLYLINE_FILES</source>
2328       <translation>The data from following files cannot be completely imported:
2329 %1
2330 </translation>
2331     </message>
2332
2333   </context>
2334
2335  <context>
2336     <name>HYDROGUI_ImportLandCoverMapDlg</name>
2337     <message>
2338       <source>LANDCOVERMAP_FILTER</source>
2339       <translation>Shape files (*.shp)</translation>
2340     </message>
2341     <message>
2342       <source>IMPORT_LANDCOVER_MAP_FROM_FILE</source>
2343       <translation>Import land cover map from file</translation>
2344     </message>
2345     <message>
2346       <source>FILE_NAME</source>
2347       <translation>File name</translation>
2348     </message>
2349     <message>
2350       <source>LANDCOVERMAP_NAME</source>
2351       <translation>Land cover map name</translation>
2352     </message>
2353     <message>
2354       <source>NAME</source>
2355       <translation>Name</translation>
2356     </message>
2357     <message>
2358       <source>FOUND_POLYGONS</source>
2359       <translation>Found polygons:</translation>
2360     </message>
2361     <message>
2362       <source>USE_DBF_AS_ST</source>
2363       <translation>Use dBase attributes as a Strickler Types</translation>
2364     </message>
2365     <message>
2366       <source>AV_ATTRS</source>
2367       <translation>Available attributes</translation>
2368     </message>
2369     <message>
2370       <source>CORR</source>
2371       <translation>Correspondence</translation>
2372     </message>
2373
2374     <message>
2375       <source>TABLE_H1</source>
2376       <translation>Attribute</translation>
2377     </message>
2378     <message>
2379       <source>TABLE_H2</source>
2380       <translation>Strickler Type</translation>
2381     </message>
2382     <message>
2383       <source>TABLE_H3</source>
2384       <translation>Color</translation>
2385     </message>
2386
2387     <message>
2388       <source>LCM_IMPORT_WARNING</source>
2389       <translation>Import of Land cover map</translation>
2390     </message>
2391     <message>
2392       <source>DBF_LOAD_ERROR</source>
2393       <translation>Cannot load DBF file</translation>
2394     </message>
2395     <message>
2396       <source>DBF_NB_RECORDS_IS_NULL</source>
2397       <translation>DBF Warning</translation>
2398     </message>
2399
2400     <message>
2401       <source>FILE_ISNT_CHOSEN</source>
2402       <translation>File isn't chosen</translation>
2403     </message>
2404     <message>
2405       <source>POLYGONS_ISNT_SELECTED</source>
2406       <translation>Polygons isn't selected</translation>
2407     </message>
2408    <message>
2409       <source>ATTRS_ISNT_SELECTED</source>
2410       <translation>Attribute isn't selected</translation>
2411     </message>
2412
2413    <message>
2414       <source>DBF_LOAD_ERR_MESS</source>
2415       <translation>Cannot open DBF file or it's corrupted</translation>
2416     </message>
2417
2418    <message>
2419       <source>DBF_NB_RECORDS_IS_NULL_MESS</source>
2420       <translation>Cannot use DBF data - number of records is null</translation>
2421     </message>
2422
2423
2424   </context>
2425
2426   <context>
2427     <name>HYDROGUI_ImportLandCoverMapOp</name>
2428     <message>
2429       <source>IMPORT_LANDCOVER_MAP</source>
2430       <translation>Import land cover map</translation>
2431     </message>
2432     <message>
2433       <source>DEFAULT_LANDCOVER_MAP_NAME</source>
2434       <translation>Landcovermap_0</translation>
2435     </message>
2436     <message>
2437       <source>DEF_POLYGON_NAME</source>
2438       <translation>polygon</translation>
2439     </message>
2440     <message>
2441       <source>LCM_IMPORT_WARNING</source>
2442       <translation>Import of Land cover map</translation>
2443     </message>
2444     <message>
2445       <source>CANNT_IMPORT_LCM</source>
2446       <translation>Cannot import land cover map;</translation>
2447     </message>
2448     <message>
2449       <source>CANNT_OPEN_SHP</source>
2450       <translation>Cannot open SHP file</translation>
2451     </message>
2452     <message>
2453       <source>CANNT_OPEN_SHX</source>
2454       <translation>Cannot open SHX file</translation>
2455     </message>
2456     <message>
2457       <source>SHP_TYPEFORMAT_MESS</source>
2458       <translation>The shape type of file is </translation>
2459     </message>
2460     <message>
2461       <source>CANNT_IMPORT_POLYGONS_FROM_SHP</source>
2462       <translation>Cannot import choosed polygons</translation>
2463     </message>
2464   </context>
2465
2466   <context>
2467     <name>HYDROGUI_ExportLandCoverMapDlg</name>
2468     <message>
2469       <source>EXPORT_LANDCOVERMAP</source>
2470       <translation>Export land cover map to SHP file</translation>
2471     </message>
2472     <message>
2473       <source>WRITE_ST_AS_ATTRS_TO_DBF</source>
2474       <translation>Write Strickler Types as attributes values to DBF file</translation>
2475     </message>
2476     <message>
2477       <source>ATTRS_NOT_WRITTEN_TO_DBF</source>
2478       <translation>Note that in current settings the attributes will NOT be written</translation>
2479     </message>
2480     <message>
2481       <source>LCM_DISCR_LABEL</source>
2482       <translation>Current Land Cover Map contains at least one non-linear border. It will be exported in the discretization mode</translation>
2483     </message>
2484     <message>
2485       <source>LCM_DEFL_LABEL</source>
2486       <translation>Enter a deflection value:</translation>
2487     </message>
2488
2489   </context>
2490
2491
2492   <context>
2493     <name>HYDROGUI_ImportSinusXOp</name>
2494     <message>
2495       <source>IMPORT_SINUSX</source>
2496       <translation>Import from SinusX</translation>
2497     </message>
2498     <message>
2499       <source>SINUSX_FILTER</source>
2500       <translation>SinusX Files (*.sx)</translation>
2501     </message>
2502     <message>
2503       <source>NO_ONE_ENTITY_IMPORTED</source>
2504       <translation>Entities cant be read</translation>
2505     </message>
2506   </context>
2507
2508   <context>
2509     <name>HYDROGUI_ExportSinusXOp</name>
2510     <message>
2511       <source>EXPORT_SINUSX</source>
2512       <translation>Export to SinusX</translation>
2513     </message>
2514     <message>
2515       <source>SINUSX_FILTER</source>
2516       <translation>SinusX Files (*.sx)</translation>
2517     </message>
2518     <message>
2519       <source>NO_ENTITIES_TO_EXPORT</source>
2520       <translation>No entities to export</translation>
2521     </message>
2522   </context>
2523
2524   <context>
2525     <name>HYDROGUI_ExportSinusXDlg</name>
2526     <message>
2527       <source>OBJECTS_TO_EXPORT</source>
2528       <translation>Objects:</translation>
2529     </message>
2530     <message>
2531       <source>EXPORT</source>
2532       <translation>Export</translation>
2533     </message>
2534   </context>
2535
2536   <context>
2537     <name>HYDROGUI_ExportFileOp</name>
2538     <message>
2539       <source>EXPORT_TO_SHAPE_FILE</source>
2540       <translation>Export</translation>
2541     </message>
2542     <message>
2543       <source>SHP_FILTER</source>
2544       <translation>Shape Files (*.shp)</translation>
2545     </message>
2546     <message>
2547       <source>CANNOT_BE_EXPORTED</source>
2548       <translation>Following entities cannot be exported:</translation>
2549     </message>
2550     <message>
2551       <source>ERROR_POLYLINES_OF_DIFF_KIND</source>
2552       <translation>Cannot export polylines of different kind</translation>
2553     </message>
2554   </context>
2555
2556   <context>
2557     <name>HYDROGUI_GeoreferencementDlg</name>
2558     <message>
2559       <source>PROFILES</source>
2560       <translation>Profiles</translation>
2561     </message>
2562     <message>
2563       <source>ALL_MODE</source>
2564       <translation>All</translation>
2565     </message>
2566     <message>
2567       <source>SELECTED_MODE</source>
2568       <translation>Selected</translation>
2569     </message>
2570     <message>
2571       <source>UPDATE_SELECTION</source>
2572       <translation>Update selection</translation>
2573     </message>
2574     <message>
2575       <source>PROFILE_HEADER</source>
2576       <translation>Profile</translation>
2577     </message>
2578     <message>
2579       <source>XG_HEADER</source>
2580       <translation>Xg</translation>
2581     </message>
2582     <message>
2583       <source>YG_HEADER</source>
2584       <translation>Yg</translation>
2585     </message>
2586     <message>
2587       <source>XD_HEADER</source>
2588       <translation>Xd</translation>
2589     </message>
2590     <message>
2591       <source>YD_HEADER</source>
2592       <translation>Yd</translation>
2593     </message>
2594   </context>
2595
2596   <context>
2597     <name>HYDROGUI_GeoreferencementOp</name>
2598     <message>
2599       <source>PROFILES_GEOREFERENCEMENT</source>
2600       <translation>Profiles georeferencement</translation>
2601     </message>
2602     <message>
2603       <source>INCOMPLETE_DATA</source>
2604       <translation>Incomplete data is set for '%1'.</translation>
2605     </message>
2606     <message>
2607       <source>CONFIRMATION</source>
2608       <translation>Confirmation</translation>
2609     </message>
2610     <message>
2611       <source>CONFIRM_STORE</source>
2612       <translation>Do you want to store table data in the data model?</translation>
2613     </message>
2614   </context>
2615
2616   <context>
2617     <name>HYDROGUI_SetColorOp</name>
2618     <message>
2619       <source>SET_COLOR</source>
2620       <translation>Set color</translation>
2621     </message>
2622   </context>
2623
2624   <context>
2625     <name>HYDROGUI_ColorDlg</name>
2626     <message>
2627       <source>COLOR</source>
2628       <translation>Color</translation>
2629     </message>
2630     <message>
2631       <source>FILLING_COLOR</source>
2632       <translation>Filling color</translation>
2633     </message>
2634     <message>
2635       <source>OBJECT_COLOR</source>
2636       <translation>Object color</translation>
2637     </message>
2638     <message>
2639       <source>TRANSPARENT</source>
2640       <translation>Transparent</translation>
2641     </message>
2642     <message>
2643       <source>BORDER_COLOR</source>
2644       <translation>Border</translation>
2645     </message>
2646   </context>
2647
2648   <context>
2649     <name>HYDROGUI_SetTransparencyOp</name>
2650     <message>
2651       <source>SET_TRANSPARENCY</source>
2652       <translation>Set transparency</translation>
2653     </message>
2654   </context>
2655
2656   <context>
2657     <name>HYDROGUI_TransparencyDlg</name>
2658     <message>
2659       <source>TRANSPARENCY</source>
2660       <translation>Transparency</translation>
2661     </message>
2662     <message>
2663       <source>APPLY_AND_CLOSE</source>
2664       <translation>Apply and Close</translation>
2665     </message>
2666     <message>
2667       <source>APPLY</source>
2668       <translation>Apply</translation>
2669     </message>
2670     <message>
2671       <source>CLOSE</source>
2672       <translation>Close</translation>
2673     </message>
2674   </context>
2675
2676   <context>
2677     <name>HYDROGUI_StreamDlg</name>
2678     <message>
2679       <source>NAME</source>
2680       <translation>Name</translation>
2681     </message>
2682     <message>
2683       <source>STREAM_NAME</source>
2684       <translation>Stream name</translation>
2685     </message>
2686     <message>
2687       <source>STREAM_PARAMETERS</source>
2688       <translation>Parameters</translation>
2689     </message>
2690     <message>
2691       <source>STREAM_HYDRAULIC_AXIS</source>
2692       <translation>Hydraulic axis</translation>
2693     </message>
2694     <message>
2695       <source>STREAM_DDZ</source>
2696       <translation>Stream ddz</translation>
2697     </message>
2698     <message>
2699       <source>STREAM_SPATIAL_STEP</source>
2700       <translation>Stream spatial step</translation>
2701     </message>
2702
2703     <message>
2704       <source>ADD</source>
2705       <translation>Add</translation>
2706     </message>
2707     <message>
2708       <source>REMOVE</source>
2709       <translation>Remove</translation>
2710     </message>
2711   </context>
2712
2713   <context>
2714     <name>HYDROGUI_StreamOp</name>
2715     <message>
2716       <source>CREATE_STREAM_ERROR</source>
2717       <translation>Stream creation error</translation>
2718     </message>
2719      <message>
2720       <source>CREATE_STREAM</source>
2721       <translation>Create stream</translation>
2722     </message>
2723     <message>
2724       <source>EDIT_STREAM</source>
2725       <translation>Edit stream</translation>
2726     </message>
2727     <message>
2728       <source>DEFAULT_STREAM_NAME</source>
2729       <translation>Stream</translation>
2730     </message>
2731     <message>
2732       <source>WARNING</source>
2733       <translation>Warning</translation>
2734     </message>
2735     <message>
2736       <source>IGNORED_PROFILES</source>
2737       <translation>The following profile(s) will be ignored:</translation>
2738     </message>
2739     <message>
2740       <source>INVALID_PROFILES</source>
2741       <translation>Invalid profiles:
2742 %1</translation>
2743     </message>
2744     <message>
2745       <source>EXISTING_PROFILES</source>
2746       <translation>Existing profiles:
2747 %1</translation>
2748     </message>
2749     <message>
2750       <source>NOT_INTERSECTED_PROFILES</source>
2751       <translation>Not intersected with the hydraulic axis:
2752 %1</translation>
2753     </message>
2754     <message>
2755       <source>AXIS_NOT_DEFINED</source>
2756       <translation>Hydraulic axis is not defined.</translation>
2757     </message>
2758     <message>
2759       <source>PROFILES_NOT_DEFINED</source>
2760       <translation>At least 2 profiles should be defined.</translation>
2761     </message>
2762     <message>
2763       <source>CONFIRMATION</source>
2764       <translation>Confirmation</translation>
2765     </message>
2766     <message>
2767       <source>CONFIRM_AXIS_CHANGE</source>
2768       <translation>The following profiles don't intersect the axis:
2769 %1
2770
2771 Do you want to remove these profiles and continue?</translation>
2772     </message>
2773     <message>
2774       <source>BAD_SELECTED_POLYLINE_TLT</source>
2775       <translation>Polyline is not appropriate for channel creation</translation>
2776     </message>
2777     <message>
2778       <source>BAD_SELECTED_POLYLINE_MSG</source>
2779       <translation>Polyline '%1' can not be used as hydraulic axis for channel.
2780 Polyline should consist from one not closed curve.</translation>
2781     </message>
2782   </context>
2783
2784   <context>
2785     <name>HYDROGUI_ChannelDlg</name>
2786     <message>
2787       <source>NAME</source>
2788       <translation>Name</translation>
2789     </message>
2790     <message>
2791       <source>CHANNEL_NAME</source>
2792       <translation>Channel name</translation>
2793     </message>
2794     <message>
2795       <source>CHANNEL_PARAMETERS</source>
2796       <translation>Parameters</translation>
2797     </message>
2798     <message>
2799       <source>CHANNEL_GUIDE_LINE</source>
2800       <translation>Guide line</translation>
2801     </message>
2802     <message>
2803       <source>CHANNEL_PROFILE</source>
2804       <translation>Profile</translation>
2805     </message>
2806     <message>
2807       <source>EQUI_DISTANCE</source>
2808       <translation>Equidistance</translation>
2809     </message>
2810   </context>
2811
2812   <context>
2813     <name>HYDROGUI_ChannelOp</name>
2814     <message>
2815       <source>CREATE_CHANNEL</source>
2816       <translation>Create channel</translation>
2817     </message>
2818     <message>
2819       <source>EDIT_CHANNEL</source>
2820       <translation>Edit channel</translation>
2821     </message>
2822     <message>
2823       <source>DEFAULT_CHANNEL_NAME</source>
2824       <translation>Channel</translation>
2825     </message>
2826     <message>
2827       <source>GUIDE_LINE_IS_NOT_SELECTED</source>
2828       <translation>Guide line is not chosen</translation>
2829     </message>
2830     <message>
2831       <source>PROFILE_IS_NOT_SELECTED</source>
2832       <translation>Profile is not chosen</translation>
2833     </message>
2834   </context>
2835   <context>
2836     <name>HYDROGUI_DigueDlg</name>
2837     <message>
2838       <source>DIGUE_NAME</source>
2839       <translation>Digue name</translation>
2840     </message>
2841   </context>
2842
2843   <context>
2844     <name>HYDROGUI_DigueOp</name>
2845     <message>
2846       <source>CREATE_DIGUE</source>
2847       <translation>Create digue</translation>
2848     </message>
2849     <message>
2850       <source>EDIT_DIGUE</source>
2851       <translation>Edit digue</translation>
2852     </message>
2853     <message>
2854       <source>DEFAULT_DIGUE_NAME</source>
2855       <translation>Digue</translation>
2856     </message>
2857   </context>
2858
2859   <context>
2860     <name>HYDROGUI_StricklerTableDlg</name>
2861     <message>
2862       <source>IMPORT_STRICKLER_TABLE_FILE</source>
2863       <translation>Import Strickler table file</translation>
2864     </message>
2865     <message>
2866       <source>EXPORT_STRICKLER_TABLE_FILE</source>
2867       <translation>Export Strickler table file</translation>
2868     </message>
2869     <message>
2870       <source>FILE_NAME</source>
2871       <translation>File name</translation>
2872     </message>
2873     <message>
2874       <source>STRICKLER_TABLE_NAME</source>
2875       <translation>Strickler table name</translation>
2876     </message>
2877     <message>
2878       <source>NAME</source>
2879       <translation>Name</translation>
2880     </message>
2881     <message>
2882       <source>DEFAULT_STRICKLER_TABLE_NAME</source>
2883       <translation>Strickler table</translation>
2884     </message>
2885     <message>
2886       <source>STRICKLER_TABLE_TABLE</source>
2887       <translation>Strickler table definition</translation>
2888     </message>
2889     <message>
2890       <source>ADD</source>
2891       <translation>Add</translation>
2892     </message>
2893     <message>
2894       <source>REMOVE</source>
2895       <translation>Remove</translation>
2896     </message>
2897     <message>
2898       <source>CLEAR_ALL</source>
2899       <translation>Clear all</translation>
2900     </message>
2901     <message>
2902       <source>STRICKLER_TYPE</source>
2903       <translation>Type</translation>
2904     </message>
2905     <message>
2906       <source>STRICKLER_COEFFICIENT</source>
2907       <translation>Coefficient</translation>
2908     </message>
2909     <message>
2910       <source>STRICKLER_TABLE_ATTR_NAME</source>
2911       <translation>QGIS attribute name</translation>
2912     </message>
2913     <message>
2914       <source>ATTR_NAME</source>
2915       <translation>Attribute name</translation>
2916     </message>
2917     <message>
2918       <source>ATTR_VALUE</source>
2919       <translation>Attr.value</translation>
2920     </message>
2921     <message>
2922       <source>COLOR</source>
2923       <translation>Color</translation>
2924     </message>
2925   </context>
2926
2927   <context>
2928     <name>HYDROGUI_StricklerTableOp</name>
2929     <message>
2930       <source>IMPORT_STRICKLER_TABLE</source>
2931       <translation>Import Strickler table</translation>
2932     </message>
2933     <message>
2934       <source>EXPORT_STRICKLER_TABLE</source>
2935       <translation>Export Strickler table</translation>
2936     </message>
2937     <message>
2938       <source>EDIT_STRICKLER_TABLE</source>
2939       <translation>Edit Strickler table</translation>
2940     </message>
2941     <message>
2942       <source>SELECT_STRICKLER_TABLE_FILE</source>
2943       <translation>The Strickler table file is not chosen</translation>
2944     </message>
2945   </context>
2946
2947   <context>
2948     <name>HYDROGUI_LandCoverMapDlg</name>
2949     <message>
2950       <source>DEFAULT_LAND_COVER_MAP_NAME</source>
2951       <translation>Land cover map</translation>
2952     </message>
2953     <message>
2954       <source>LAND_COVER_MAP_NAME</source>
2955       <translation>Land cover map name</translation>
2956     </message>
2957     <message>
2958       <source>NAME</source>
2959       <translation>Name</translation>
2960     </message>
2961     <message>
2962       <source>LAND_COVER_MAP_PARAMETERS</source>
2963       <translation>Parameters</translation>
2964     </message>
2965     <message>
2966       <source>LAND_COVER_MAP_POLYLINE_FACE</source>
2967       <translation>Polyline / Face</translation>
2968     </message>
2969     <message>
2970       <source>LAND_COVER_MAP_STRICKLER_TYPE</source>
2971       <translation>Strickler type</translation>
2972     </message>
2973     <message>
2974       <source>LAND_COVER_MAP_SELECTED_FACES</source>
2975       <translation>
2976
2977   This operation is performed on a set of land covers selected in the 3D Viewer.
2978
2979   Number of selected land covers: </translation>
2980     </message>
2981   </context>
2982
2983   <context>
2984     <name>HYDROGUI_LandCoverMapOp</name>
2985     <message>
2986       <source>CREATE_LAND_COVER_MAP</source>
2987       <translation>Create land cover map</translation>
2988     </message>
2989     <message>
2990       <source>ADD_LAND_COVER</source>
2991       <translation>Add land cover to the land cover map</translation>
2992     </message>
2993     <message>
2994       <source>REMOVE_LAND_COVER</source>
2995       <translation>Remove land cover from the land cover map</translation>
2996     </message>
2997     <message>
2998       <source>SPLIT_LAND_COVER</source>
2999       <translation>Split land cover(s) inside the land cover map</translation>
3000     </message>
3001     <message>
3002       <source>MERGE_LAND_COVER</source>
3003       <translation>Merge land covers inside the land cover map</translation>
3004     </message>
3005     <message>
3006       <source>CHANGE_LAND_COVER_TYPE</source>
3007       <translation>Change Strickler type(s) assigned to the land cover(s) inside the land cover map</translation>
3008     </message>
3009     <message>
3010       <source>POLYLINE_FACE_NOT_DEFINED</source>
3011       <translation>Polyline / Face object should be defined.</translation>
3012     </message>
3013     <message>
3014       <source>STRICKLER_TYPE_NOT_DEFINED</source>
3015       <translation>Strickler type should be defined.</translation>
3016     </message>
3017     <message>
3018       <source>LAND_COVER_MAP_UNDEFINED</source>
3019       <translation>Land cover map is undefined.</translation>
3020     </message>
3021     <message>
3022       <source>LAND_COVER_NOT_ADDED</source>
3023       <translation>Land cover can not be added.</translation>
3024     </message>
3025     <message>
3026       <source>LAND_COVER_NOT_REMOVED</source>
3027       <translation>Land cover can not be removed.</translation>
3028     </message>
3029     <message>
3030       <source>LAND_COVER_NOT_SPLIT</source>
3031       <translation>Land cover can not be split.</translation>
3032     </message>
3033     <message>
3034       <source>LAND_COVER_NOT_MERGED</source>
3035       <translation>Land cover can not be merged.</translation>
3036     </message>
3037     <message>
3038       <source>LAND_COVER_TYPE_NOT_CHANGED</source>
3039       <translation>Strickler type can not be changed for all selected land covers.</translation>
3040     </message>
3041     <message>
3042       <source>LAND_COVER_OBJECT_CANNOT_BE_CREATED</source>
3043       <translation>Land Cover object can not be created</translation>
3044     </message>
3045   </context>
3046
3047   <context>
3048     <name>HYDROGUI_TranslateObstacleDlg</name>
3049     <message>
3050       <source>OBSTACLE_NAME</source>
3051       <translation>Obstacle name</translation>
3052     </message>
3053     <message>
3054       <source>NAME</source>
3055       <translation>Name</translation>
3056     </message>
3057     <message>
3058       <source>TRANSLATION_ARGUMENTS</source>
3059       <translation>Arguments</translation>
3060     </message>
3061     <message>
3062       <source>DX</source>
3063       <translation>Dx</translation>
3064     </message>
3065     <message>
3066       <source>DY</source>
3067       <translation>Dy</translation>
3068     </message>
3069     <message>
3070       <source>DZ</source>
3071       <translation>Dz</translation>
3072     </message>
3073   </context>
3074
3075   <context>
3076     <name>HYDROGUI_TranslateObstacleOp</name>
3077     <message>
3078       <source>TRANSLATE_OBSTACLE</source>
3079       <translation>Translation of an obstacle</translation>
3080     </message>
3081   </context>
3082
3083
3084   <context>
3085     <name>HYDROGUI_RunBrowser</name>
3086     <message>
3087         <source>EXTERNAL_BROWSER_CANNOT_SHOW_PAGE</source>
3088         <translation>External browser &quot;%1&quot; can not show help page &quot;%2&quot;. You could change it in preferences.</translation>
3089     </message>
3090     <message>
3091         <source>WRN_DEFINE_EXTERNAL_BROWSER</source>
3092         <translation>External browser is not found. Do you want to define it in preferences?</translation>
3093     </message>
3094   </context>
3095
3096   <context>
3097     <name>HYDROGUI_ZLevelsDlg</name>
3098     <message>
3099         <source>CHANGE_LAYER_ORDER</source>
3100         <translation>Change layer order</translation>
3101     </message>
3102     <message>
3103         <source>ALL_OBJECTS</source>
3104         <translation>All objects</translation>
3105     </message>
3106     <message>
3107         <source>ALL_OBJECTS_UNCHECKED_TLT</source>
3108         <translation>Include hidden objects to the list</translation>
3109     </message>
3110     <message>
3111         <source>ALL_OBJECTS_CHECKED_TLT</source>
3112         <translation>Exclude hidden objects from the list</translation>
3113     </message>
3114     <message>
3115       <source>APPLY_AND_CLOSE</source>
3116       <translation>Apply and Close</translation>
3117     </message>
3118     <message>
3119         <source>APPLY</source>
3120         <translation>Apply</translation>
3121     </message>
3122     <message>
3123         <source>CLOSE</source>
3124         <translation>Close</translation>
3125     </message>
3126   </context>
3127
3128   <context>
3129     <name>HYDROGUI_OrderedListWidget</name>
3130     <message>
3131         <source>TOP_TLT</source>
3132         <translation>Move the item(s) on top</translation>
3133     </message>
3134     <message>
3135         <source>UP_TLT</source>
3136         <translation>Move the item(s) up</translation>
3137     </message>
3138     <message>
3139         <source>DOWN_TLT</source>
3140         <translation>Move the item(s) down</translation>
3141     </message>
3142     <message>
3143         <source>BOTTOM_TLT</source>
3144         <translation>Move the item(s) on bottom</translation>
3145     </message>
3146   </context>
3147
3148   <context>
3149     <name>HYDROGUI_PriorityWidget</name>
3150     <message>
3151       <source>ADD</source>
3152       <translation>Add</translation>
3153     </message>
3154     <message>
3155       <source>REMOVE</source>
3156       <translation>Remove</translation>
3157     </message>
3158     <message>
3159       <source>CLEAR_ALL</source>
3160       <translation>Clear all</translation>
3161     </message>
3162     <message>
3163       <source>INCORRECT_INPUT</source>
3164       <translation>Incorrect input</translation>
3165     </message>
3166   </context>
3167
3168   <context>
3169     <name>HYDROGUI_PriorityTableModel</name>
3170     <message>
3171       <source>LESS</source>
3172       <translation>&lt;</translation>
3173     </message>
3174     <message>
3175       <source>GREATER</source>
3176       <translation>&gt;</translation>
3177     </message>
3178     <message>
3179       <source>PRIORITY</source>
3180       <translation>Priority</translation>
3181     </message>
3182     <message>
3183       <source>ZMIN</source>
3184       <translation>Zmin</translation>
3185     </message>
3186     <message>
3187       <source>ZMAX</source>
3188       <translation>Zmax</translation>
3189     </message>
3190     <message>
3191       <source>OBJECT1</source>
3192       <translation>Object 1</translation>
3193     </message>
3194     <message>
3195       <source>OBJECT2</source>
3196       <translation>Object 2</translation>
3197     </message>
3198     <message>
3199       <source>BATHYMETRY</source>
3200       <translation>Bathymetry</translation>
3201     </message>
3202     <message>
3203       <source>ALREADY_EXISTS</source>
3204       <translation>The selected objects combination already exists.</translation>
3205     </message>
3206   </context>
3207
3208   <context>
3209     <name>HYDROGUI_RiverBottomDlg</name>
3210     <message>
3211       <source>STREAM_OBJECT</source>
3212       <translation>Stream object</translation>
3213     </message>
3214   </context>
3215
3216   <context>
3217     <name>HYDROGUI_RiverBottomOp</name>
3218     <message>
3219       <source>FIND_STREAM_BOTTOM</source>
3220       <translation>Find stream bottom</translation>
3221     </message>
3222   </context>
3223
3224   <context>
3225     <name>HYDROGUI_ProfileInterpolateDlg</name>
3226     <message>
3227       <source>STREAM_OBJECT</source>
3228       <translation>Stream object</translation>
3229     </message>
3230     <message>
3231       <source>INTERPOLATOR</source>
3232       <translation>Interpolator</translation>
3233     </message>
3234     <message>
3235       <source>DESCRIPTION</source>
3236       <translation>Description</translation>
3237     </message>
3238     <message>
3239       <source>PROFILE_1</source>
3240       <translation>Profile 1</translation>
3241     </message>
3242     <message>
3243       <source>PROFILE_2</source>
3244       <translation>Profile 2</translation>
3245     </message>
3246     <message>
3247       <source>NUMBER_OF_PROFILES</source>
3248       <translation>Number of profiles</translation>
3249     </message>
3250     <message>
3251       <source>PARAMETERS</source>
3252       <translation>Parameters</translation>
3253     </message>
3254   </context>
3255
3256   <context>
3257     <name>HYDROGUI_ProfileInterpolateOp</name>
3258     <message>
3259       <source>PROFILE_INTERPOLATION</source>
3260       <translation>Profile interpolation</translation>
3261     </message>
3262     <message>
3263       <source>INTERPOLATION_ERROR</source>
3264       <translation>Interpolation error</translation>
3265     </message>
3266     <message>
3267       <source>CALCULATE_ERROR</source>
3268       <translation>Can't perform calculation: %1</translation>
3269     </message>
3270     <message>
3271       <source>CANT_GET_STREAM_OBJECT</source>
3272       <translation>Can't obtain stream oject \"%1\"</translation>
3273     </message>
3274   </context>
3275
3276   <context>
3277     <name>HYDROGUI_RecognizeContoursDlg</name>
3278     <message>
3279       <source>NAME</source>
3280       <translation>Name</translation>
3281     </message>
3282     <message>
3283       <source>ORIGINAL_IMAGE</source>
3284       <translation>Original image</translation>
3285     </message>
3286     <message>
3287       <source>RECOGNIZED_POLYLINES</source>
3288       <translation>Polylines</translation>
3289     </message>
3290   </context>
3291
3292   <context>
3293     <name>HYDROGUI_RecognizeContoursOp</name>
3294     <message>
3295       <source>CONTOURS_RECOGNITION</source>
3296       <translation>Contours recognition</translation>
3297     </message>
3298     <message>
3299       <source>NO_DETECTED_CONTOURS</source>
3300       <translation>No contours were detected.</translation>
3301     </message>
3302   </context>
3303
3304   <context>
3305     <name>HYDROGUI_SplitPolylinesOp</name>
3306     <message>
3307       <source>SPLIT_POLYLINES</source>
3308       <translation>Split polylines</translation>
3309     </message>
3310     <message>
3311       <source>SPLIT_POLYLINE_BY_TOOL_WARNING_TITLE</source>
3312       <translation>Split polyline by tool</translation>
3313     </message>
3314     <message>
3315       <source>SPLIT_POLYLINE_BY_TOOL_WARNING_MSG</source>
3316       <translation>The split polyline is not intersected by the tool.</translation>
3317     </message>
3318   </context>
3319
3320   <context>
3321     <name>HYDROGUI_SplitPolylinesDlg</name>
3322     <message>
3323       <source>POLYLINES</source>
3324       <translation>Polylines</translation>
3325     </message>
3326     <message>
3327       <source>POINT</source>
3328       <translation>Point</translation>
3329     </message>
3330     <message>
3331       <source>POLYLINE</source>
3332       <translation>Polyline</translation>
3333     </message>
3334     <message>
3335       <source>TOOL_POLYLINE</source>
3336       <translation>Tool polyline</translation>
3337     </message>
3338     <message>
3339       <source>SPLIT_POLYLINES</source>
3340       <translation>Split polylines</translation>
3341     </message>
3342     <message>
3343       <source>BY_POINT</source>
3344       <translation>By point</translation>
3345     </message>
3346     <message>
3347       <source>BY_TOOL</source>
3348       <translation>By tool</translation>
3349     </message>
3350     <message>
3351       <source>COMPLETE_SPLIT</source>
3352       <translation>Complete split</translation>
3353     </message>
3354     <message>
3355       <source>RESULT_NAME</source>
3356       <translation>Result name prefix:</translation>
3357     </message>
3358   </context>
3359
3360   <context>
3361     <name>HYDROGUI_MergePolylinesDlg</name>
3362     <message>
3363       <source>POLYLINES</source>
3364       <translation>Polylines</translation>
3365     </message>
3366     <message>
3367       <source>MERGE_POLYLINES</source>
3368       <translation>Merge polylines</translation>
3369     </message>
3370     <message>
3371       <source>RESULT_NAME</source>
3372       <translation>Result name:</translation>
3373     </message>
3374     <message>
3375       <source>IS_CONNECT</source>
3376       <translation>Connect by a new segment</translation>
3377     </message>
3378   </context>
3379   <context>
3380     <name>HYDROGUI_MergePolylinesOp</name>
3381     <message>
3382       <source>MERGE_POLYLINES</source>
3383       <translation>Merge polylines</translation>
3384     </message>
3385   </context>
3386
3387   <context>
3388     <name>HYDROGUI_ObjListBox</name>
3389     <message>
3390       <source>INCLUDE</source>
3391       <translation>Include</translation>
3392     </message>
3393     <message>
3394       <source>EXCLUDE</source>
3395       <translation>Exclude</translation>
3396     </message>
3397   </context>
3398
3399   <context>
3400     <name>HYDROGUI_PolylineExtractionOp</name>
3401     <message>
3402       <source>POLYLINE_EXTRACTION</source>
3403       <translation>Polyline extraction</translation>
3404     </message>
3405   </context>
3406
3407 </TS>