1 // Copyright (C) 2014-2015 EDF-R&D
2 // This library is free software; you can redistribute it and/or
3 // modify it under the terms of the GNU Lesser General Public
4 // License as published by the Free Software Foundation; either
5 // version 2.1 of the License, or (at your option) any later version.
7 // This library is distributed in the hope that it will be useful,
8 // but WITHOUT ANY WARRANTY; without even the implied warranty of
9 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
10 // Lesser General Public License for more details.
12 // You should have received a copy of the GNU Lesser General Public
13 // License along with this library; if not, write to the Free Software
14 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
16 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
19 #include "HYDROData_PolylineXY.h"
21 #include "HYDROData_BSplineOperation.h"
22 #include "HYDROData_Document.h"
23 #include "HYDROData_ShapesTool.h"
24 #include "HYDROData_Tool.h"
25 #include "HYDROData_PolylineOperator.h"
26 #include "HYDROData_TopoCurve.h"
28 #include <BRep_Builder.hxx>
29 #include <BRepBuilderAPI_MakeEdge.hxx>
30 #include <BRepBuilderAPI_MakeWire.hxx>
31 #include <BRepBuilderAPI_MakePolygon.hxx>
32 #include <BRepBuilderAPI_MakeFace.hxx>
33 #include <BRepOffsetAPI_NormalProjection.hxx>
34 #include <BRepAdaptor_Curve.hxx>
40 #include <GeomAPI_ProjectPointOnCurve.hxx>
41 #include <GeomAdaptor_Curve.hxx>
42 #include <Geom_Line.hxx>
43 #include <Geom_BSplineCurve.hxx>
45 #include <GCPnts_AbscissaPoint.hxx>
46 #include <GCPnts_QuasiUniformDeflection.hxx>
47 #include <GCPnts_UniformDeflection.hxx>
49 #include <ImageComposer_MetaTypes.h>
55 #include <NCollection_Map.hxx>
57 #include <TCollection_ExtendedString.hxx>
59 #include <TDataStd_ListIteratorOfListOfByte.hxx>
60 #include <TColStd_ListIteratorOfListOfInteger.hxx>
61 #include <TColStd_ListIteratorOfListOfReal.hxx>
63 #include <TColStd_Array1OfReal.hxx>
64 #include <TColgp_Array1OfPnt.hxx>
66 #include <TDataStd_AsciiString.hxx>
67 #include <TDataStd_BooleanList.hxx>
68 #include <TDataStd_ExtStringList.hxx>
69 #include <TDataStd_IntegerList.hxx>
70 #include <TDataStd_ListIteratorOfListOfExtendedString.hxx>
71 #include <TDataStd_RealList.hxx>
72 #include <TDataStd_UAttribute.hxx>
74 #include <TopoDS_Iterator.hxx>
75 #include <TopTools_ListIteratorOfListOfShape.hxx>
76 #include <TopTools_HSequenceOfShape.hxx>
77 #include <TopExp_Explorer.hxx>
78 #include <ShapeAnalysis_FreeBounds.hxx>
82 #include <QPainterPath>
86 #include "HYDRO_trace.hxx"
87 #include <BRepTools.hxx>
91 static const Standard_GUID GUID_IS_UNEDITABLE("e5799736-9030-4051-91a4-2e58321fa153");
93 const double LOCAL_SELECTION_TOLERANCE = 0.0001;
95 TCollection_AsciiString getUniqueSectionName( const NCollection_Sequence<TCollection_AsciiString>& theNamesSeq )
97 NCollection_Map<TCollection_AsciiString> aNamesMap;
99 for ( int i = 1, n = theNamesSeq.Size(); i <= n; ++i )
101 const TCollection_AsciiString& aSectName = theNamesSeq.Value( i );
102 aNamesMap.Add( aSectName );
105 TCollection_AsciiString aResName;
110 aResName = TCollection_AsciiString( "Section_" ) + aPrefIdx;
113 while ( aNamesMap.Contains( aResName ) );
118 TCollection_AsciiString getUniqueSectionName( const Handle(TDataStd_ExtStringList)& theNamesList )
120 NCollection_Sequence<TCollection_AsciiString> aNamesSeq;
122 TDataStd_ListIteratorOfListOfExtendedString aNamesIter( theNamesList->List() );
123 for ( ; aNamesIter.More(); aNamesIter.Next() )
124 aNamesSeq.Append( aNamesIter.Value() );
126 return getUniqueSectionName( aNamesSeq );
129 IMPLEMENT_STANDARD_HANDLE(HYDROData_PolylineXY, HYDROData_IPolyline)
130 IMPLEMENT_STANDARD_RTTIEXT(HYDROData_PolylineXY, HYDROData_IPolyline)
132 HYDROData_PolylineXY::HYDROData_PolylineXY()
133 : HYDROData_IPolyline(),
134 myIsInCustomFlag( false )
138 HYDROData_PolylineXY::~HYDROData_PolylineXY()
142 QStringList HYDROData_PolylineXY::DumpToPython( const QString& thePyScriptPath,
143 MapOfTreatedObjects& theTreatedObjects ) const
145 QStringList aResList = dumpObjectCreation( theTreatedObjects );
146 QString aPolylineName = GetObjPyName();
148 // Set the wire color
149 QStringList aWireColorDef;
151 QColor aWireColor = GetWireColor();
152 setPythonObjectColor( aWireColorDef, aWireColor, DefaultWireColor(), "SetWireColor" );
154 if ( !aWireColorDef.isEmpty() )
156 aResList << aWireColorDef;
157 aResList << QString( "" );
160 bool anIsEditable = IsEditable();
163 // If polyline is not editable we try to import the shape from geom
164 TCollection_AsciiString aGeomObjectEntry = GetGeomObjectEntry();
165 if ( !aGeomObjectEntry.IsEmpty() )
167 QString aSalomeObjName = HYDROData_Tool::GenerateNameForPython( theTreatedObjects, "polyline_sobj" );
168 aResList << QString( "%1 = salome.myStudy.FindObjectID( \"%2\" )" )
169 .arg( aSalomeObjName ).arg( aGeomObjectEntry.ToCString() );
171 aResList << QString( "%1.ImportFromGeomIOR( %2.GetIOR() )" )
172 .arg( aPolylineName ).arg( aSalomeObjName );
174 aResList << QString( "%1.SetGeomObjectEntry( \"%2\" )" )
175 .arg( aPolylineName ).arg( aGeomObjectEntry.ToCString() );
181 NCollection_Sequence<TCollection_AsciiString> aSectNames;
182 NCollection_Sequence<HYDROData_PolylineXY::SectionType> aSectTypes;
183 NCollection_Sequence<bool> aSectClosures;
184 GetSections( aSectNames, aSectTypes, aSectClosures );
186 for ( int i = 1, n = aSectNames.Size(); i <= n; ++i )
188 const TCollection_AsciiString& aSectName = aSectNames.Value( i );
189 const SectionType& aSectType = aSectTypes.Value( i );
190 bool aSectClosure = aSectClosures.Value( i );
192 aResList << QString( "%1.AddSection( \"%2\", %3, %4 )" ).arg( aPolylineName )
193 .arg( aSectName.ToCString() ).arg( aSectType ).arg( aSectClosure );
195 HYDROData_IPolyline::PointsList aSectPointsList = GetPoints( i - 1 );
196 for ( int k = 1, aNbPoints = aSectPointsList.Size(); k <= aNbPoints; ++k )
198 const Point& aSectPoint = aSectPointsList.Value( k );
200 QString anXStr = QString::number( aSectPoint.X(), 'f', 2 );
201 QString anYStr = QString::number( aSectPoint.Y(), 'f', 2 );
202 aResList << QString( "%1.AddPoint( %2, gp_XY( %3, %4 ) )" ).arg( aPolylineName )
203 .arg( i - 1 ).arg( anXStr ).arg( anYStr );
207 aResList << QString( "" );
208 aResList << QString( "%1.Update()" ).arg( aPolylineName );
209 aResList << QString( "" );
214 QVariant HYDROData_PolylineXY::GetDataVariant()
216 QPainterPath aPath = GetPainterPath();
219 aVarData.setValue<QPainterPath>( aPath );
224 QColor HYDROData_PolylineXY::DefaultWireColor()
226 return QColor( Qt::black );
229 bool HYDROData_PolylineXY::ImportFromGeomIOR( const TCollection_AsciiString& theIOR )
234 if ( theIOR.IsEmpty() )
237 TopoDS_Shape aShape = GEOMBase::GetShapeFromIOR( theIOR.ToCString() );
238 if ( aShape.IsNull() )
241 return ImportShape( aShape, false );
245 void HYDROData_PolylineXY::SetGeomObjectEntry( const TCollection_AsciiString& theEntry )
247 TDataStd_AsciiString::Set( myLab.FindChild( DataTag_GeomObjectEntry ), theEntry );
250 TCollection_AsciiString HYDROData_PolylineXY::GetGeomObjectEntry() const
252 TCollection_AsciiString aRes;
254 TDF_Label aLabel = myLab.FindChild( DataTag_GeomObjectEntry, false );
255 if ( !aLabel.IsNull() )
257 Handle(TDataStd_AsciiString) anAsciiStr;
258 if ( aLabel.FindAttribute( TDataStd_AsciiString::GetID(), anAsciiStr ) )
259 aRes = anAsciiStr->Get();
265 bool convertEdgeToSection( const TopoDS_Edge& theEdge,
266 NCollection_Sequence<TCollection_AsciiString>& theSectNames,
267 NCollection_Sequence<HYDROData_PolylineXY::SectionType>& theSectTypes,
268 NCollection_Sequence<bool>& theSectClosures,
269 NCollection_Sequence<HYDROData_PolylineXY::PointsList>& theSectPoints,
271 bool IsInterpolationAllowed,
272 double theDeflection )
274 Standard_Real aFirst = 0.0, aLast = 0.0;
275 Handle(Geom_Curve) anEdgeGeomCurve = BRep_Tool::Curve( theEdge, aFirst, aLast );
276 if ( anEdgeGeomCurve.IsNull() )
279 TCollection_AsciiString aSectName = getUniqueSectionName( theSectNames );
280 bool anIsEdgeClosed = anEdgeGeomCurve->IsClosed();
282 HYDROData_PolylineXY::SectionType aSectionType = HYDROData_PolylineXY::SECTION_POLYLINE;
283 HYDROData_PolylineXY::PointsList aPointsList;
285 if( anEdgeGeomCurve->IsKind( STANDARD_TYPE(Geom_Line) ) )
287 Handle(Geom_Line) aGeomLine = Handle(Geom_Line)::DownCast( anEdgeGeomCurve );
289 gp_Pnt aFirstPoint, aLastPoint;
290 aGeomLine->D0( aFirst, aFirstPoint );
291 aGeomLine->D0( aLast, aLastPoint );
293 HYDROData_PolylineXY::Point aSectFirstPoint( aFirstPoint.X(), aFirstPoint.Y() );
294 aPointsList.Append( aSectFirstPoint );
296 HYDROData_PolylineXY::Point aSectLastPoint( aLastPoint.X(), aLastPoint.Y() );
297 aPointsList.Append( aSectLastPoint );
299 else if ( anEdgeGeomCurve->IsKind( STANDARD_TYPE(Geom_BSplineCurve) ) || IsInterpolationAllowed )
301 aSectionType = HYDROData_PolylineXY::SECTION_SPLINE;
303 BRepAdaptor_Curve anAdaptorCurve( theEdge );
304 GCPnts_QuasiUniformDeflection aDiscrete( anAdaptorCurve, theDeflection );
305 //GCPnts_UniformDeflection aDiscrete( anAdaptorCurve, theDeflection );
307 int aNbPoints = aDiscrete.NbPoints();
309 // Decrease the number of imported poles because of last one
310 // pole is the closing point which are the start point
311 if ( anIsEdgeClosed ) aNbPoints--;
313 for ( int i = 1; i <= aNbPoints; ++i )
315 const gp_Pnt& aPoint = aDiscrete.Value( i );
317 HYDROData_PolylineXY::Point aSectPoint( aPoint.X(), aPoint.Y() );
318 aPointsList.Append( aSectPoint );
323 // Other curve types are not supported
327 if ( aPointsList.IsEmpty() )
330 theSectNames.Append( aSectName );
331 theSectTypes.Append( aSectionType );
332 theSectClosures.Append( anIsEdgeClosed );
333 theSectPoints.Append( aPointsList );
339 bool convertEdgesToSections( const TopoDS_Edge& theEdge,
340 NCollection_Sequence<TCollection_AsciiString>& theSectNames,
341 NCollection_Sequence<HYDROData_PolylineXY::SectionType>& theSectTypes,
342 NCollection_Sequence<bool>& theSectClosures,
343 NCollection_Sequence<HYDROData_PolylineXY::PointsList>& theSectPoints,
345 bool IsInterpolationAllowed,
346 double theDeflection,
347 const Handle( HYDROData_PolylineXY )& theOldPolyline )
349 DEBTRACE("convertEdgesToSections")
350 Standard_Real aFirst = 0.0, aLast = 0.0;
351 Handle(Geom_Curve) anEdgeGeomCurve = BRep_Tool::Curve( theEdge, aFirst, aLast );
352 if ( anEdgeGeomCurve.IsNull() )
355 bool isPrevious = (theSectTypes.Size() > 0);
356 DEBTRACE("nb sections: " << theSectTypes.Size());
357 HYDROData_PolylineXY::SectionType prevSectType = HYDROData_PolylineXY::SECTION_SPLINE;;
358 HYDROData_PolylineXY::PointsList prevPointList;
359 bool isPrevClosed = true;
362 prevSectType = theSectTypes.Last();
363 prevPointList = theSectPoints.Last();
364 isPrevClosed = theSectClosures.Last();
367 bool anIsEdgeClosed = anEdgeGeomCurve->IsClosed();
368 anIsEdgeClosed &= IsCanBeClosed; // on split, resulting edges are normally not closed...
369 HYDROData_PolylineXY::SectionType aSectionType ;
370 if( anEdgeGeomCurve->IsKind( STANDARD_TYPE(Geom_Line) ) )
372 aSectionType = HYDROData_PolylineXY::SECTION_POLYLINE;
374 else if ( anEdgeGeomCurve->IsKind( STANDARD_TYPE(Geom_BSplineCurve) ) || IsInterpolationAllowed )
376 aSectionType = HYDROData_PolylineXY::SECTION_SPLINE;
380 // Other curve types are not supported
384 bool isNewSection = !isPrevious || isPrevClosed || anIsEdgeClosed || prevSectType != aSectionType;
385 DEBTRACE(isNewSection <<": " << !isPrevious << " " << isPrevClosed << " " << anIsEdgeClosed << " " << (prevSectType != aSectionType));
387 HYDROData_PolylineXY::PointsList aPointsList;
390 aPointsList = prevPointList;
393 if( aSectionType == HYDROData_PolylineXY::SECTION_POLYLINE )
395 DEBTRACE("SECTION_POLYLINE");
396 Handle(Geom_Line) aGeomLine = Handle(Geom_Line)::DownCast( anEdgeGeomCurve );
398 gp_Pnt aFirstPoint, aLastPoint;
399 aGeomLine->D0( aFirst, aFirstPoint );
400 aGeomLine->D0( aLast, aLastPoint );
401 HYDROData_PolylineXY::Point aSectFirstPoint( aFirstPoint.X(), aFirstPoint.Y() );
402 HYDROData_PolylineXY::Point aSectLastPoint( aLastPoint.X(), aLastPoint.Y() );
405 if (aSectFirstPoint == prevPointList.Last())
407 DEBTRACE("points shared: a");//aPointsList.Append( aSectFirstPoint );
408 aPointsList.Append( aSectLastPoint );
410 else if (aSectLastPoint == prevPointList.Last())
412 DEBTRACE("points shared: b");//aPointsList.Append( aSectLastPoint );
413 aPointsList.Append( aSectFirstPoint );
415 else if (aSectFirstPoint == prevPointList.First())
417 DEBTRACE("points shared: c");//aPointsList.Prepend( aSectFirstPoint );
418 aPointsList.Prepend( aSectLastPoint );
420 else if (aSectLastPoint == prevPointList.First())
422 DEBTRACE("points shared: d");//aPointsList.Prepend( aSectLastPoint );
423 aPointsList.Prepend( aSectFirstPoint );
427 DEBTRACE("no point shared")
428 isNewSection = true; // no point shared, new section
430 aPointsList.Append( aSectFirstPoint );
431 aPointsList.Append( aSectLastPoint );
436 DEBTRACE("new section");
437 aPointsList.Append( aSectFirstPoint );
438 aPointsList.Append( aSectLastPoint );
441 else // aSectionType == HYDROData_PolylineXY::SECTION_SPLINE
443 DEBTRACE("SECTION_SPLINE");
447 BRepAdaptor_Curve anAdaptorCurve(theEdge);
448 if (theOldPolyline.IsNull()) // --- no previous polyline: build a set of points from scratch for the spline
450 GCPnts_QuasiUniformDeflection aDiscrete(anAdaptorCurve, theDeflection);
452 int aNbPoints = aDiscrete.NbPoints();
454 // Decrease the number of imported poles because of last one
455 // pole is the closing point which are the start point
459 for (int i = 1; i <= aNbPoints; ++i)
461 const gp_Pnt& aPoint = aDiscrete.Value(i);
462 HYDROData_PolylineXY::Point aSectPoint(aPoint.X(), aPoint.Y());
463 aPointsList.Append(aSectPoint);
466 gp_Pnt endPts[] = {gp_Pnt(aPointsList.First().X(),aPointsList.First().Y(), 0),
467 gp_Pnt(aPointsList.Last().X(),aPointsList.Last().Y(), 0) };
468 DEBTRACE("curve start: "<< endPts[0].X() << " " << endPts[0].Y());
469 DEBTRACE("curve end: "<< endPts[1].X() << " " << endPts[1].Y());
471 else // --- split of a previous polyline: try to retrieve old sets of points and add intersection points
473 const gp_Pnt aEndPs[] = { anAdaptorCurve.Value(anAdaptorCurve.FirstParameter()).XYZ(),
474 anAdaptorCurve.Value(anAdaptorCurve.LastParameter()).XYZ() };
475 double midPar = (anAdaptorCurve.LastParameter() + anAdaptorCurve.FirstParameter())/2;
477 anAdaptorCurve.D0(midPar, midPnt);
478 DEBTRACE("curve first point: " << aEndPs[0].X() << " " << aEndPs[0].Y() << " " << aEndPs[0].Z());
479 DEBTRACE("curve last point: " << aEndPs[1].X() << " " << aEndPs[1].Y() << " " << aEndPs[1].Z());
480 DEBTRACE("curve mid point: " << midPnt.X() << " " << midPnt.Y() << " " << midPnt.Z());
482 std::vector<TopoDS_Wire> aCurves;
483 HYDROData_PolylineOperator::GetWires(theOldPolyline, aCurves);
485 int nbSections = theOldPolyline->NbSections();
486 DEBTRACE("nbSections: "<< nbSections << ", nbCurves: " << aCurves.size() );
487 for (int isec = 0; isec < nbSections; isec++)
489 DEBTRACE("section: "<< isec);
490 bool isOldSectionclosed = theOldPolyline->IsClosedSection(isec);
491 TopoDS_Wire aWire = aCurves[isec]; // we suppose sections and wires are in the same order
492 TopExp_Explorer anExp(aWire, TopAbs_EDGE);
493 TopoDS_Edge anEdge = TopoDS::Edge(anExp.Current()); // the first is OK: only one normally with splines
494 BRepAdaptor_Curve adaptorOldCurve(anEdge);
495 double pfirst = adaptorOldCurve.FirstParameter();
496 double plast = adaptorOldCurve.LastParameter();
497 DEBTRACE("previous curve first last : "<< pfirst << " " << plast);
498 double p[3] = {-1, -1};
499 double d0= ProjectPointToCurve(aEndPs[0].XYZ(), adaptorOldCurve,p[0]);
500 double d1= ProjectPointToCurve(aEndPs[1].XYZ(), adaptorOldCurve,p[1]);
501 double d2= ProjectPointToCurve(midPnt.XYZ(), adaptorOldCurve, p[2]);
502 DEBTRACE("d0: "<<d0<<" d1: "<<d1<<" d2: "<<d2<<" p0: "<<p[0]<<" p1: "<<p[1]<<" p2: "<<p[2]);
503 if ((d0 < 1.e-3) and (d1 < 1.e-3) and (d2 < 1.e-3)) // we got the good old curve (and the good section)
508 if (! isOldSectionclosed) // no need to check first and last points on an open curve
514 else // old section closed: check if we use first or last points...
516 if((pmin < pmax) and((abs(pmin - pfirst)> 1.e-3) and (abs(pmax - plast) >1.e-3))) // internal points forward
518 else if ((pmin > pmax) and((abs(pmin - plast)> 1.e-3) and (abs(pmax - pfirst) >1.e-3))) // internal points reverse
524 else if ((abs(pmin - plast) <1.e-3) and (p[2] < pmax)) // forward, replace pmin par pfirst
526 else if ((abs(pmin - plast) <1.e-3) and (p[2] > pmax)) // reverse
532 else if ((abs(pmax - pfirst) <1.e-3) and (p[2] < pmin)) // reverse
538 else if ((abs(pmax - pfirst) <1.e-3) and (p[2] > pmin)) // forward, replace pmax par plast
541 HYDROData_PolylineXY::Point aFirstPoint, aLastPoint;
544 aFirstPoint = HYDROData_PolylineXY::Point(aEndPs[0].X(), aEndPs[0].Y());
545 aLastPoint = HYDROData_PolylineXY::Point(aEndPs[1].X(), aEndPs[1].Y());
549 aFirstPoint = HYDROData_PolylineXY::Point(aEndPs[1].X(), aEndPs[1].Y());
550 aLastPoint = HYDROData_PolylineXY::Point(aEndPs[0].X(), aEndPs[0].Y());
552 aPointsList.Append(aFirstPoint);
554 HYDROData_PolylineXY::PointsList aSectPoints = theOldPolyline->GetPoints(isec, false);
555 int nbPoints = aSectPoints.Length();
557 for (int i=1; i<=nbPoints; i++)
559 HYDROData_PolylineXY::Point aPoint = aSectPoints.Value(i);
560 gp_XYZ p(aPoint.X(), aPoint.Y(), 0);
562 double d = ProjectPointToCurve(p, adaptorOldCurve, param);
563 if ((param > pmin) and (param < pmax))
565 DEBTRACE("param: " << param);
566 aPointsList.Append(aPoint);
570 for (int i=nbPoints; i>0; i--)
572 HYDROData_PolylineXY::Point aPoint = aSectPoints.Value(i);
573 gp_XYZ p(aPoint.X(), aPoint.Y(), 0);
575 double d = ProjectPointToCurve(p, adaptorOldCurve, param);
576 if ((param > pmin) and (param < pmax))
578 DEBTRACE("param: " << param);
579 aPointsList.Append(aPoint);
583 aPointsList.Append(aLastPoint);
590 if ( aPointsList.IsEmpty() )
593 TCollection_AsciiString aSectName = getUniqueSectionName( theSectNames );
596 DEBTRACE("isNewSection");
597 theSectNames.Append( aSectName );
598 theSectTypes.Append( aSectionType );
599 theSectClosures.Append( anIsEdgeClosed );
600 theSectPoints.Append( aPointsList );
604 DEBTRACE("sameSection");
605 theSectPoints.SetValue(theSectPoints.Length(), aPointsList);
611 bool HYDROData_PolylineXY::ImportShape( const TopoDS_Shape& theShape,
612 bool IsInterpolationAllowed,
613 const Handle( HYDROData_PolylineXY )& theOldPolyline,
614 bool IsClosureAllowed,
615 double theDeviation )
617 DEBTRACE("ImportShape");
618 if ( theShape.IsNull() )
623 bool anIsCanBeImported = false;
625 NCollection_Sequence<TCollection_AsciiString> aSectNames;
626 NCollection_Sequence<SectionType> aSectTypes;
627 NCollection_Sequence<bool> aSectClosures;
628 NCollection_Sequence<PointsList> aSectPoints;
630 if ( theShape.ShapeType() == TopAbs_EDGE )
632 DEBTRACE("TopAbs_EDGE");
633 TopoDS_Edge anEdge = TopoDS::Edge( theShape );
634 // anIsCanBeImported = convertEdgeToSection( anEdge, aSectNames, aSectTypes,
635 // aSectClosures, aSectPoints, true, IsInterpolationAllowed, theDeviation );
636 anIsCanBeImported = convertEdgesToSections( anEdge, aSectNames, aSectTypes, aSectClosures,
637 aSectPoints, IsClosureAllowed, IsInterpolationAllowed,
638 theDeviation, theOldPolyline );
640 else if ( theShape.ShapeType() == TopAbs_WIRE )
642 DEBTRACE("TopAbs_WIRE");
643 TopTools_SequenceOfShape anEdges;
644 HYDROData_ShapesTool::ExploreShapeToShapes( theShape, TopAbs_EDGE, anEdges );
646 anIsCanBeImported = !anEdges.IsEmpty();
647 for ( int i = 1, n = anEdges.Length(); i <= n && anIsCanBeImported; ++i )
649 TopoDS_Edge aWireEdge = TopoDS::Edge( anEdges.Value( i ) );
650 anIsCanBeImported = convertEdgesToSections( aWireEdge, aSectNames, aSectTypes, aSectClosures,
651 aSectPoints, IsClosureAllowed, IsInterpolationAllowed,
652 theDeviation, theOldPolyline );
656 if ( anIsCanBeImported )
658 for ( int i = 1, n = aSectNames.Length(); i <= n; ++i )
660 const TCollection_AsciiString& aSectName = aSectNames.Value( i );
661 const SectionType& aSectType = aSectTypes.Value( i );
662 bool anIsSectionClosed = aSectClosures.Value( i );
663 const PointsList& aSectPointsList = aSectPoints( i );
665 AddSection( aSectName, aSectType, anIsSectionClosed );
666 SetPoints( i - 1, aSectPointsList );
671 TopoDS_Shape aShape = theShape;
673 if ( theShape.ShapeType() == TopAbs_EDGE )
675 // We make the wire from incoming edge because of other algorithms
676 // are waiting at least the wire from polyline
677 TopoDS_Edge anEdge = TopoDS::Edge( theShape );
678 BRepBuilderAPI_MakeWire aMakeWire( anEdge );
680 if ( aMakeWire.IsDone() )
681 aShape = aMakeWire.Wire();
684 gp_Pln aPlane( gp_Pnt( 0, 0, 0 ), gp_Dir( 0, 0, 1 ) );
685 BRepBuilderAPI_MakeFace aMakeFace( aPlane );
687 BRepOffsetAPI_NormalProjection aProj( aMakeFace.Face() );
690 TopoDS_Shape aResult;
692 aResult = aProj.Shape();
697 setEditable( anIsCanBeImported );
702 TopoDS_Wire HYDROData_PolylineXY::BuildWire( const SectionType& theType,
703 const bool& theIsClosed,
704 const NCollection_Sequence<gp_XYZ>& thePoints )
707 if( theType == SECTION_POLYLINE )
709 int aNbPoints = thePoints.Length();
710 BRepBuilderAPI_MakePolygon aMakeWire;
711 for ( int i = 1, n = aNbPoints; i <= n ; ++i )
713 gp_XYZ aPoint = thePoints.Value( i );
714 gp_Pnt aPnt( aPoint.X(), aPoint.Y(), aPoint.Z() );
715 aMakeWire.Add( aPnt );
717 if( theIsClosed && ( aNbPoints > 2 ) )
720 if ( aMakeWire.IsDone() )
721 aWire = aMakeWire.Wire();
723 else //if( theType == PolylineSection::SECTION_SPLINE )
725 BRepBuilderAPI_MakeWire aMakeWire;
727 if ( thePoints.Size() > 1 )
729 Handle(Geom_BSplineCurve) aCurve =
730 HYDROData_BSplineOperation::ComputeCurve( thePoints, theIsClosed, LOCAL_SELECTION_TOLERANCE );
732 TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge( aCurve ).Edge();
733 aMakeWire.Add( anEdge );
736 if ( aMakeWire.IsDone() )
743 void HYDROData_PolylineXY::BuildPainterPath( QPainterPath& thePath,
744 const SectionType& theType,
745 const bool& theIsClosed,
746 const NCollection_Sequence<gp_XYZ>& thePoints )
748 if ( thePoints.IsEmpty() )
751 if ( theType == SECTION_POLYLINE )
753 const gp_XYZ& aFirstPoint = thePoints.Value( 1 );
754 thePath.moveTo( aFirstPoint.X(), aFirstPoint.Y() );
756 for( int i = 2, n = thePoints.Size(); i <= n; ++i )
758 const gp_XYZ& aSectPoint = thePoints.Value( i );
760 thePath.lineTo( aSectPoint.X(), aSectPoint.Y() );
764 thePath.closeSubpath();
768 Handle(Geom_BSplineCurve) aCurve =
769 HYDROData_BSplineOperation::ComputeCurve( thePoints, theIsClosed, LOCAL_SELECTION_TOLERANCE );
770 HYDROData_BSplineOperation::ComputePath( aCurve, thePath );
774 void HYDROData_PolylineXY::Update()
778 // If polyline is not editable we no need to update it wire
783 HYDROData_IPolyline::Update();
785 NCollection_Sequence<TCollection_AsciiString> aSectNames;
786 NCollection_Sequence<HYDROData_PolylineXY::SectionType> aSectTypes;
787 NCollection_Sequence<bool> aSectClosures;
788 GetSections( aSectNames, aSectTypes, aSectClosures );
790 //BRepBuilderAPI_MakeWire aMakeWire;
792 TopTools_ListOfShape aSectionWiresList;
794 for ( int aSectionId = 1, aNbSects = aSectNames.Size(); aSectionId <= aNbSects; aSectionId++ )
796 TCollection_AsciiString aSectName = aSectNames.Value( aSectionId );
797 SectionType aSectionType = aSectTypes.Value( aSectionId );
798 bool anIsSectionClosed = aSectClosures.Value( aSectionId );
800 PointsList aSectPointsList = GetPoints( aSectionId - 1 );
801 if ( aSectPointsList.IsEmpty() )
804 NCollection_Sequence<gp_XYZ> aPoints;
805 for( int i = 1, n = aSectPointsList.Size(); i <= n; ++i )
807 const Point& aSectPoint = aSectPointsList.Value( i );
809 gp_XYZ aPoint( aSectPoint.X(), aSectPoint.Y(), 0.0 );
810 aPoints.Append( aPoint );
813 TopoDS_Wire aSectionWire = BuildWire( aSectionType, anIsSectionClosed, aPoints );
814 if ( !aSectionWire.IsNull() ) {
815 aSectionWiresList.Append( aSectionWire );
816 //aMakeWire.Add( aSectionWire );
819 // all input wires in the <aSectionWiresList>
820 Handle(TopTools_HSequenceOfShape) aSeqWires = new TopTools_HSequenceOfShape;
821 Handle(TopTools_HSequenceOfShape) aSeqEdges = new TopTools_HSequenceOfShape;
822 TopTools_ListIteratorOfListOfShape it(aSectionWiresList);
823 for(;it.More();it.Next())
825 TopExp_Explorer it2(it.Value(), TopAbs_EDGE);
826 for(;it2.More();it2.Next())
827 aSeqEdges->Append(it2.Current());
831 TopoDS_Compound aCmp;
832 TopoDS_Shape aResult;
833 aBB.MakeCompound(aCmp);
834 if(aSeqEdges->Length() >1)
836 ShapeAnalysis_FreeBounds::ConnectEdgesToWires( aSeqEdges, 1E-5, Standard_True, aSeqWires );
838 if( aSeqWires->Length()==1 )
839 aResult = aSeqWires->Value( 1 );
842 for (Standard_Integer i = 1; i <= aSeqWires->Length();i++)
844 const TopoDS_Shape& aS1 = aSeqWires->Value(i);
850 else if (aSeqEdges->Length() == 1)
852 BRepBuilderAPI_MakeWire mkWire (TopoDS::Edge(aSeqEdges->Value(1)));
854 aResult = mkWire.Wire();
860 bool HYDROData_PolylineXY::IsHas2dPrs() const
865 bool HYDROData_PolylineXY::IsEditable() const
867 return !myLab.IsAttribute( GUID_IS_UNEDITABLE );
870 void HYDROData_PolylineXY::setEditable( const bool theIsEditable )
872 if ( !theIsEditable )
873 TDataStd_UAttribute::Set( myLab, GUID_IS_UNEDITABLE );
875 myLab.ForgetAttribute( GUID_IS_UNEDITABLE );
879 * Returns true if polyline is closed
881 bool HYDROData_PolylineXY::IsClosed( const bool theIsSimpleCheck ) const
883 bool anIsClosed = false;
885 TopoDS_Shape aShape = GetShape();
886 if ( aShape.IsNull() )
889 TopTools_SequenceOfShape aWires;
890 HYDROData_ShapesTool::ExploreShapeToShapes( aShape, TopAbs_WIRE, aWires );
892 int aNbWires = aWires.Length();
893 if ( theIsSimpleCheck )
895 anIsClosed = aNbWires > 0;
896 for ( int i = 1; i <= aNbWires && anIsClosed; ++i )
898 const TopoDS_Shape& aWire = aWires.Value( i );
899 anIsClosed = BRep_Tool::IsClosed( aWire );
904 anIsClosed = aNbWires == 1 && BRep_Tool::IsClosed( aWires.First() );
910 double HYDROData_PolylineXY::GetDistance( const int theSectionIndex,
911 const int thePointIndex ) const
913 double aResDistance = -1;
914 if ( theSectionIndex < 0 || theSectionIndex >= NbSections() )
917 if ( thePointIndex == 0 )
920 SectionType aSectionType = GetSectionType( theSectionIndex );
921 bool anIsSectionClosed = IsClosedSection( theSectionIndex );
922 PointsList aSectPointsList = GetPoints( theSectionIndex );
923 if ( thePointIndex < 0 || thePointIndex >= aSectPointsList.Size() )
926 if ( aSectionType == SECTION_POLYLINE )
930 Point aPrevPoint = aSectPointsList.Value( 1 );
931 for ( int i = 2, aNbPoints = aSectPointsList.Size(); i <= aNbPoints; ++i )
933 const Point& aSectPoint = aSectPointsList.Value( i );
934 aResDistance += gp_Pnt2d( aPrevPoint ).Distance( aSectPoint );
935 aPrevPoint = aSectPoint;
937 if ( thePointIndex == i - 1 )
945 int aSectNbPoints = aSectPointsList.Size();
946 NCollection_Sequence<gp_XYZ> aPoints;
947 for( int i = 1 ; i <= aSectNbPoints; ++i )
949 const Point& aSectPoint = aSectPointsList.Value( i );
951 gp_XYZ aPoint( aSectPoint.X(), aSectPoint.Y(), 0.0 );
952 aPoints.Append( aPoint );
954 if ( thePointIndex == i - 1 )
955 aPointToTest = aPoint;
958 Handle(Geom_BSplineCurve) aCurve =
959 HYDROData_BSplineOperation::ComputeCurve( aPoints, anIsSectionClosed, LOCAL_SELECTION_TOLERANCE );
961 Quantity_Parameter aFirstParam = aCurve->FirstParameter();
962 Quantity_Parameter aSecondParam = aCurve->LastParameter();
964 if ( thePointIndex != aSectNbPoints - 1 )
966 GeomAPI_ProjectPointOnCurve aProject( aPointToTest, aCurve );
967 aSecondParam = aProject.LowerDistanceParameter();
970 GeomAdaptor_Curve anAdap( aCurve );
972 aResDistance = GCPnts_AbscissaPoint::Length( anAdap, aFirstParam, aSecondParam );
978 int HYDROData_PolylineXY::NbSections() const
980 Handle(TDataStd_ExtStringList) aNamesList;
981 Handle(TDataStd_IntegerList) aTypesList;
982 Handle(TDataStd_BooleanList) aClosuresList;
983 getSectionsLists( aNamesList, aTypesList, aClosuresList, false );
985 return !aClosuresList.IsNull() ? aClosuresList->Extent() : 0;
988 void HYDROData_PolylineXY::AddSection( const TCollection_AsciiString& theSectName,
989 const SectionType theSectionType,
990 const bool theIsClosed )
992 Handle(TDataStd_ExtStringList) aNamesList;
993 Handle(TDataStd_IntegerList) aTypesList;
994 Handle(TDataStd_BooleanList) aClosuresList;
995 getSectionsLists( aNamesList, aTypesList, aClosuresList );
997 TCollection_ExtendedString aSectName( theSectName );
998 if ( aSectName.Length() <= 0 )
999 aSectName = getUniqueSectionName( aNamesList );
1001 aNamesList->Append( aSectName );
1002 aTypesList->Append( theSectionType );
1003 aClosuresList->Append( theIsClosed );
1008 TCollection_AsciiString HYDROData_PolylineXY::GetSectionName( const int theSectionIndex ) const
1010 TCollection_AsciiString aResName;
1012 Handle(TDataStd_ExtStringList) aNamesList;
1013 Handle(TDataStd_IntegerList) aTypesList;
1014 Handle(TDataStd_BooleanList) aClosuresList;
1015 getSectionsLists( aNamesList, aTypesList, aClosuresList, false );
1016 if ( aNamesList.IsNull() || theSectionIndex >= aNamesList->Extent() )
1019 TDataStd_ListIteratorOfListOfExtendedString aNamesIter( aNamesList->List() );
1020 for ( int i = 0; aNamesIter.More() && i != theSectionIndex; aNamesIter.Next(), ++i );
1022 if ( aNamesIter.More() )
1023 aResName = aNamesIter.Value();
1028 void HYDROData_PolylineXY::SetSectionName( const int theSectionIndex,
1029 const TCollection_AsciiString& theSectionName )
1031 Handle(TDataStd_ExtStringList) aNamesList;
1032 Handle(TDataStd_IntegerList) aTypesList;
1033 Handle(TDataStd_BooleanList) aClosuresList;
1034 getSectionsLists( aNamesList, aTypesList, aClosuresList, false );
1035 if ( aNamesList.IsNull() || theSectionIndex >= aNamesList->Extent() )
1038 TDataStd_ListOfExtendedString anOldNamesList;
1039 anOldNamesList = aNamesList->List();
1041 // Refill the existing list
1042 aNamesList->Clear();
1044 TCollection_ExtendedString aNewSectName = theSectionName;
1046 TDataStd_ListIteratorOfListOfExtendedString aNamesIter( anOldNamesList );
1047 for ( int i = 0; aNamesIter.More(); aNamesIter.Next(), ++i )
1048 aNamesList->Append( i == theSectionIndex ? aNewSectName : aNamesIter.Value() );
1051 HYDROData_PolylineXY::SectionType HYDROData_PolylineXY::GetSectionType( const int theSectionIndex ) const
1053 Handle(TDataStd_ExtStringList) aNamesList;
1054 Handle(TDataStd_IntegerList) aTypesList;
1055 Handle(TDataStd_BooleanList) aClosuresList;
1056 getSectionsLists( aNamesList, aTypesList, aClosuresList, false );
1057 if ( aTypesList.IsNull() || theSectionIndex >= aTypesList->Extent() )
1058 return SECTION_POLYLINE;
1060 TColStd_ListIteratorOfListOfInteger aTypesIter( aTypesList->List() );
1061 for ( int i = 0; aTypesIter.More() && i != theSectionIndex; aTypesIter.Next(), ++i );
1063 return aTypesIter.More() ? (SectionType)aTypesIter.Value() : SECTION_POLYLINE;
1066 void HYDROData_PolylineXY::SetSectionType( const int theSectionIndex,
1067 const SectionType theSectionType )
1069 Handle(TDataStd_ExtStringList) aNamesList;
1070 Handle(TDataStd_IntegerList) aTypesList;
1071 Handle(TDataStd_BooleanList) aClosuresList;
1072 getSectionsLists( aNamesList, aTypesList, aClosuresList, false );
1073 if ( aTypesList.IsNull() || theSectionIndex >= aTypesList->Extent() )
1076 TColStd_ListOfInteger anOldTypesList;
1077 anOldTypesList = aTypesList->List();
1079 // Refill the existing list
1080 aTypesList->Clear();
1082 TColStd_ListIteratorOfListOfInteger aTypesIter( anOldTypesList );
1083 for ( int i = 0; aTypesIter.More(); aTypesIter.Next(), ++i )
1084 aTypesList->Append( i == theSectionIndex ? theSectionType : aTypesIter.Value() );
1089 bool HYDROData_PolylineXY::IsClosedSection( const int theSectionIndex ) const
1091 Handle(TDataStd_ExtStringList) aNamesList;
1092 Handle(TDataStd_IntegerList) aTypesList;
1093 Handle(TDataStd_BooleanList) aClosuresList;
1094 getSectionsLists( aNamesList, aTypesList, aClosuresList, false );
1095 if ( aClosuresList.IsNull() || theSectionIndex >= aClosuresList->Extent() )
1098 TDataStd_ListIteratorOfListOfByte aClosuresIter( aClosuresList->List() );
1099 for ( int i = 0; aClosuresIter.More() && i != theSectionIndex; aClosuresIter.Next(), ++i );
1101 return aClosuresIter.More() ? (bool)aClosuresIter.Value() : false;
1104 void HYDROData_PolylineXY::SetSectionClosed( const int theSectionIndex,
1105 const bool theIsClosed )
1107 Handle(TDataStd_ExtStringList) aNamesList;
1108 Handle(TDataStd_IntegerList) aTypesList;
1109 Handle(TDataStd_BooleanList) aClosuresList;
1110 getSectionsLists( aNamesList, aTypesList, aClosuresList, false );
1111 if ( aClosuresList.IsNull() || theSectionIndex >= aClosuresList->Extent() )
1114 TDataStd_ListOfByte anOldClosuresList;
1115 anOldClosuresList = aClosuresList->List();
1117 // Refill the existing list
1118 aClosuresList->Clear();
1120 TDataStd_ListIteratorOfListOfByte aClosuresIter( anOldClosuresList );
1121 for ( int i = 0; aClosuresIter.More(); aClosuresIter.Next(), ++i )
1122 aClosuresList->Append( i == theSectionIndex ? theIsClosed : (bool)aClosuresIter.Value() );
1127 void HYDROData_PolylineXY::GetSections( NCollection_Sequence<TCollection_AsciiString>& theSectNames,
1128 NCollection_Sequence<SectionType>& theSectTypes,
1129 NCollection_Sequence<bool>& theSectClosures ) const
1131 theSectNames.Clear();
1132 theSectTypes.Clear();
1133 theSectClosures.Clear();
1137 const_cast<HYDROData_PolylineXY*>( this )->Interpolate();
1140 Handle(TDataStd_ExtStringList) aNamesList;
1141 Handle(TDataStd_IntegerList) aTypesList;
1142 Handle(TDataStd_BooleanList) aClosuresList;
1143 getSectionsLists( aNamesList, aTypesList, aClosuresList, false );
1144 if ( aNamesList.IsNull() || aTypesList.IsNull() || aClosuresList.IsNull() )
1147 TDataStd_ListIteratorOfListOfExtendedString aNamesIter( aNamesList->List() );
1148 TColStd_ListIteratorOfListOfInteger aTypesIter( aTypesList->List() );
1149 TDataStd_ListIteratorOfListOfByte aClosuresIter( aClosuresList->List() );
1150 for ( ; aNamesIter.More() && aTypesIter.More() && aClosuresIter.More();
1151 aNamesIter.Next(), aTypesIter.Next(), aClosuresIter.Next() )
1153 const TCollection_ExtendedString& aSectName = aNamesIter.Value();
1154 SectionType aSectType = (SectionType)aTypesIter.Value();
1155 bool aSectClosures = aClosuresIter.Value();
1157 theSectNames.Append( aSectName );
1158 theSectTypes.Append( aSectType );
1159 theSectClosures.Append( aSectClosures );
1163 void HYDROData_PolylineXY::RemoveSection( const int theSectionIndex )
1165 Handle(TDataStd_ExtStringList) aNamesList;
1166 Handle(TDataStd_IntegerList) aTypesList;
1167 Handle(TDataStd_BooleanList) aClosuresList;
1168 getSectionsLists( aNamesList, aTypesList, aClosuresList, false );
1169 if ( aNamesList.IsNull() || theSectionIndex >= aNamesList->Extent() )
1172 if ( aNamesList->Extent() == 1 )
1174 removeSectionsLists();
1175 removePointsLists();
1179 TDataStd_ListOfExtendedString anOldNamesList;
1180 anOldNamesList = aNamesList->List();
1182 TColStd_ListOfInteger anOldTypesList;
1183 anOldTypesList = aTypesList->List();
1185 TDataStd_ListOfByte anOldClosuresList;
1186 anOldClosuresList = aClosuresList->List();
1188 // Refill the existing lists
1189 aNamesList->Clear();
1190 aTypesList->Clear();
1191 aClosuresList->Clear();
1193 TDataStd_ListIteratorOfListOfExtendedString aNamesIter( anOldNamesList );
1194 TColStd_ListIteratorOfListOfInteger aTypesIter( anOldTypesList );
1195 TDataStd_ListIteratorOfListOfByte aClosuresIter( anOldClosuresList );
1196 for ( int i = 0; aNamesIter.More() && aTypesIter.More() && aClosuresIter.More();
1197 aNamesIter.Next(), aTypesIter.Next(), aClosuresIter.Next(), ++i )
1199 if ( i == theSectionIndex )
1200 continue; // skip index to remove
1202 aNamesList->Append( aNamesIter.Value() );
1203 aTypesList->Append( aTypesIter.Value() );
1204 aClosuresList->Append( (bool)aClosuresIter.Value() );
1207 // Remove points that belongs to removed section
1208 removePointsLists( theSectionIndex );
1214 void HYDROData_PolylineXY::RemoveSections()
1216 removeSectionsLists();
1217 removePointsLists();
1221 void HYDROData_PolylineXY::AddPoint( const int theSectionIndex,
1222 const Point& thePoint,
1223 const int thePointIndex )
1225 Handle(TDataStd_RealList) aListX, aListY;
1226 getPointsLists( theSectionIndex, aListX, aListY );
1228 if ( thePointIndex < 0 || thePointIndex >= aListX->Extent() )
1230 aListX->Append( thePoint.X() );
1231 aListY->Append( thePoint.Y() );
1235 TColStd_ListOfReal anOldListX;
1236 anOldListX = aListX->List();
1238 TColStd_ListOfReal anOldListY;
1239 anOldListY = aListY->List();
1241 // Refill the existing lists
1245 TColStd_ListIteratorOfListOfReal anIterX( anOldListX );
1246 TColStd_ListIteratorOfListOfReal anIterY( anOldListY );
1247 for ( int i = 0; anIterX.More() && anIterY.More(); anIterX.Next(), anIterY.Next(), ++i )
1249 double aCoordX = anIterX.Value();
1250 double aCoordY = anIterY.Value();
1252 if ( i == thePointIndex )
1254 // Insert our new point
1255 aListX->Append( thePoint.X() );
1256 aListY->Append( thePoint.Y() );
1259 aListX->Append( aCoordX );
1260 aListY->Append( aCoordY );
1267 void HYDROData_PolylineXY::SetPoint( const int theSectionIndex,
1268 const Point& thePoint,
1269 const int thePointIndex )
1271 Handle(TDataStd_RealList) aListX, aListY;
1272 getPointsLists( theSectionIndex, aListX, aListY );
1274 if ( thePointIndex < 0 )
1276 aListX->Prepend( thePoint.X() );
1277 aListY->Prepend( thePoint.Y() );
1279 else if ( thePointIndex >= aListX->Extent() )
1281 aListX->Append( thePoint.X() );
1282 aListY->Append( thePoint.Y() );
1286 TColStd_ListOfReal anOldListX;
1287 anOldListX = aListX->List();
1289 TColStd_ListOfReal anOldListY;
1290 anOldListY = aListY->List();
1292 // Refill the existing lists
1296 TColStd_ListIteratorOfListOfReal anIterX( anOldListX );
1297 TColStd_ListIteratorOfListOfReal anIterY( anOldListY );
1298 for ( int i = 0; anIterX.More() && anIterY.More(); anIterX.Next(), anIterY.Next(), ++i )
1300 double aCoordX = anIterX.Value();
1301 double aCoordY = anIterY.Value();
1303 if ( i == thePointIndex )
1305 // Insert our new point instead of old one
1306 aCoordX = thePoint.X();
1307 aCoordY = thePoint.Y();
1310 aListX->Append( aCoordX );
1311 aListY->Append( aCoordY );
1318 void HYDROData_PolylineXY::SetPoints( const int theSectionIndex,
1319 const PointsList& thePoints )
1321 Handle(TDataStd_RealList) aListX, aListY;
1322 getPointsLists( theSectionIndex, aListX, aListY );
1327 for ( int i = 1, n = thePoints.Length(); i <= n; ++i )
1329 const Point& aPoint = thePoints.Value( i );
1330 aListX->Append( aPoint.X() );
1331 aListY->Append( aPoint.Y() );
1335 void HYDROData_PolylineXY::RemovePoint( const int theSectionIndex,
1336 const int thePointIndex )
1338 Handle(TDataStd_RealList) aListX, aListY;
1339 getPointsLists( theSectionIndex, aListX, aListY, false );
1340 if ( aListX.IsNull() || aListY.IsNull() || aListX->IsEmpty() )
1343 if ( aListX->Extent() == 1 )
1345 removePointsLists( theSectionIndex );
1349 TColStd_ListOfReal anOldListX;
1350 anOldListX = aListX->List();
1352 TColStd_ListOfReal anOldListY;
1353 anOldListY = aListY->List();
1355 // Refill the existing lists
1359 TColStd_ListIteratorOfListOfReal anIterX( anOldListX );
1360 TColStd_ListIteratorOfListOfReal anIterY( anOldListY );
1361 for ( int i = 0; anIterX.More() && anIterY.More(); anIterX.Next(), anIterY.Next(), ++i )
1363 if ( i == thePointIndex )
1364 continue; // skip index to remove
1366 aListX->Append( anIterX.Value() );
1367 aListY->Append( anIterY.Value() );
1374 HYDROData_PolylineXY::PointsList HYDROData_PolylineXY::GetPoints( const int theSectionIndex, bool IsConvertToGlobal ) const
1376 PointsList aResList;
1380 const_cast<HYDROData_PolylineXY*>( this )->Interpolate();
1383 Handle(TDataStd_RealList) aListX, aListY;
1384 getPointsLists( theSectionIndex, aListX, aListY, false );
1385 if ( aListX.IsNull() || aListY.IsNull() || aListX->IsEmpty() )
1388 TColStd_ListIteratorOfListOfReal anIterX( aListX->List() );
1389 TColStd_ListIteratorOfListOfReal anIterY( aListY->List() );
1390 Handle(HYDROData_Document) aDoc = HYDROData_Document::Document( myLab );
1391 for ( ; anIterX.More() && anIterY.More(); anIterX.Next(), anIterY.Next() )
1393 Point aPoint( anIterX.Value(), anIterY.Value() );
1394 if (IsConvertToGlobal)
1395 aDoc->Transform( aPoint, false );
1396 aResList.Append( aPoint );
1402 QPainterPath HYDROData_PolylineXY::GetPainterPath() const
1406 NCollection_Sequence<TCollection_AsciiString> aSectNames;
1407 NCollection_Sequence<HYDROData_PolylineXY::SectionType> aSectTypes;
1408 NCollection_Sequence<bool> aSectClosures;
1409 GetSections( aSectNames, aSectTypes, aSectClosures );
1411 for ( int aSectionId = 1, aNbSects = aSectNames.Size(); aSectionId <= aNbSects; aSectionId++ )
1413 TCollection_AsciiString aSectName = aSectNames.Value( aSectionId );
1414 SectionType aSectionType = aSectTypes.Value( aSectionId );
1415 bool anIsSectionClosed = aSectClosures.Value( aSectionId );
1417 PointsList aSectPointsList = GetPoints( aSectionId - 1 );
1418 if ( aSectPointsList.IsEmpty() )
1421 NCollection_Sequence<gp_XYZ> aPoints;
1422 for( int i = 1, n = aSectPointsList.Size(); i <= n; ++i )
1424 const Point& aSectPoint = aSectPointsList.Value( i );
1426 gp_XYZ aPoint( aSectPoint.X(), aSectPoint.Y(), 0.0 );
1427 aPoints.Append( aPoint );
1430 BuildPainterPath( aPath, aSectionType, anIsSectionClosed, aPoints );
1436 void HYDROData_PolylineXY::UpdateLocalCS( double theDx, double theDy )
1438 NCollection_Sequence<TCollection_AsciiString> aSectNames;
1439 NCollection_Sequence<HYDROData_PolylineXY::SectionType> aSectTypes;
1440 NCollection_Sequence<bool> aSectClosures;
1441 GetSections( aSectNames, aSectTypes, aSectClosures );
1443 gp_XY aDelta( theDx, theDy );
1444 for ( int i = 0, aNbSects = aSectNames.Size(); i < aNbSects; i++ )
1446 PointsList aPoints = GetPoints( i );
1447 for( int j = 1, n = aPoints.Size(); j <= n; ++j )
1449 Point& aPoint = aPoints.ChangeValue( j );
1452 SetPoints( i, aPoints );
1457 void HYDROData_PolylineXY::Transform( const QTransform& theTrsf )
1459 NCollection_Sequence<TCollection_AsciiString> aSectNames;
1460 NCollection_Sequence<HYDROData_PolylineXY::SectionType> aSectTypes;
1461 NCollection_Sequence<bool> aSectClosures;
1462 GetSections( aSectNames, aSectTypes, aSectClosures );
1464 for ( int i = 0, aNbSects = aSectNames.Size(); i < aNbSects; i++ ) {
1465 PointsList aPoints = GetPoints( i );
1466 for( int j = 1, n = aPoints.Size(); j <= n; ++j ) {
1467 Point& aPoint = aPoints.ChangeValue( j );
1469 QPointF aTrsfPoint = theTrsf.map( QPointF( aPoint.X(), aPoint.Y() ) );
1471 aPoint.SetX( aTrsfPoint.x() );
1472 aPoint.SetY( aTrsfPoint.y() );
1474 SetPoints( i, aPoints );
1480 bool HYDROData_PolylineXY::IsCustom() const
1482 if( myIsInCustomFlag )
1485 bool isNull = GetShape().IsNull();
1488 HYDROData_PolylineXY* aThat = const_cast<HYDROData_PolylineXY*>( this );
1489 aThat->myIsInCustomFlag = true;
1490 for( int i=0, n=NbSections(); i<n; i++ )
1491 aNbPoints += NbPoints( i );
1492 aThat->myIsInCustomFlag = false;
1494 return !isNull && aNbPoints == 0;
1497 bool HYDROData_PolylineXY::GetIsInCustomFlag() const
1499 return myIsInCustomFlag;
1502 void HYDROData_PolylineXY::SetIsInCustomFlag( bool theValue )
1504 myIsInCustomFlag = theValue;
1507 void HYDROData_PolylineXY::Interpolate()
1509 ImportShape( GetShape(), true );