2 #include "HYDROData_Obstacle.h"
4 #include "HYDROData_Document.h"
5 #include "HYDROData_ShapesGroup.h"
6 #include "HYDROData_ShapesTool.h"
8 #include <Basics_Utils.hxx>
10 #include <BRepTools.hxx>
11 #include <BRep_Builder.hxx>
13 #include <IGESControl_Reader.hxx>
14 #include <IGESData_IGESModel.hxx>
16 #include <STEPControl_Reader.hxx>
18 #include <Interface_Static.hxx>
21 #include <TopoDS_Iterator.hxx>
22 #include <TopoDS_Shape.hxx>
23 #include <TopoDS_Edge.hxx>
25 #include <TDataStd_AsciiString.hxx>
27 #include <TColStd_SequenceOfAsciiString.hxx>
29 #include <TopExp_Explorer.hxx>
34 #include <QStringList>
36 #include <Standard_ErrorHandler.hxx> // CAREFUL ! position of this file is critic
38 #include <HYDROData_Projection.h>
40 IMPLEMENT_STANDARD_HANDLE(HYDROData_Obstacle,HYDROData_ArtificialObject)
41 IMPLEMENT_STANDARD_RTTIEXT(HYDROData_Obstacle,HYDROData_ArtificialObject)
44 HYDROData_Obstacle::HYDROData_Obstacle()
45 : HYDROData_ArtificialObject()
49 HYDROData_Obstacle::~HYDROData_Obstacle()
53 QStringList HYDROData_Obstacle::DumpToPython( MapOfTreatedObjects& theTreatedObjects ) const
55 QStringList aResList = dumpObjectCreation( theTreatedObjects );
56 QString aName = GetName();
60 aResList << QString( "" );
61 aResList << QString( "%1.Update();" ).arg( aName );
62 aResList << QString( "" );
67 void HYDROData_Obstacle::Update()
71 checkAndSetAltitudeObject();
73 HYDROData_Entity::Update();
76 TopoDS_Shape HYDROData_Obstacle::GetTopShape() const
81 TopoDS_Shape HYDROData_Obstacle::GetShape3D() const
86 void HYDROData_Obstacle::SetShape3D( const TopoDS_Shape& theShape )
88 TopoDS_Face aShape2d = HYDROData_Projection::MakeProjection( theShape );
89 HYDROData_ArtificialObject::SetShape3D( theShape );
90 HYDROData_ArtificialObject::SetTopShape( aShape2d );
93 QColor HYDROData_Obstacle::DefaultFillingColor()
95 return QColor( Qt::yellow );
98 QColor HYDROData_Obstacle::DefaultBorderColor()
100 return QColor( Qt::transparent );
103 bool HYDROData_Obstacle::ImportFromFile( const QString& theFilePath )
105 // Check the file existence
106 QFileInfo aFileInfo( theFilePath );
107 if ( !aFileInfo.exists() ) {
115 QString aFileSuf = aFileInfo.suffix().toLower();
116 if ( aFileSuf == "brep" ) {
117 aShape = ImportBREP( theFilePath );
118 } else if ( aFileSuf == "iges" || aFileSuf == "igs" ) {
119 aShape = ImportIGES( theFilePath );
120 } else if ( aFileSuf == "step" ) {
121 aShape = ImportSTEP( theFilePath );
124 // Check the result shape
125 aRes = !aShape.IsNull();
127 // Set shape to the obstacle in case of success
129 SetShape3D( aShape );
130 SetFilePath( theFilePath );
136 void HYDROData_Obstacle::SetFilePath( const QString& theFilePath )
138 TCollection_AsciiString anAsciiStr( theFilePath.toStdString().c_str() );
139 TDataStd_AsciiString::Set( myLab.FindChild( DataTag_FilePath ), anAsciiStr );
142 QString HYDROData_Obstacle::GetFilePath() const
146 Handle(TDataStd_AsciiString) anAsciiStr;
147 if ( myLab.FindChild( DataTag_FilePath ).FindAttribute( TDataStd_AsciiString::GetID(), anAsciiStr ) )
148 aRes = QString( anAsciiStr->Get().ToCString() );
153 void HYDROData_Obstacle::SetGeomObjectEntry( const QString& theEntry )
155 TCollection_AsciiString anAsciiStr( theEntry.toStdString().c_str() );
156 TDataStd_AsciiString::Set( myLab.FindChild( DataTag_GeomObjectEntry ), anAsciiStr );
159 QString HYDROData_Obstacle::GetGeomObjectEntry() const
163 Handle(TDataStd_AsciiString) anAsciiStr;
164 if ( myLab.FindChild( DataTag_GeomObjectEntry ).FindAttribute( TDataStd_AsciiString::GetID(), anAsciiStr ) )
165 aRes = QString( anAsciiStr->Get().ToCString() );
170 TopoDS_Shape HYDROData_Obstacle::ImportBREP( const QString& theFilePath ) const
172 TopoDS_Shape aResShape;
174 BRep_Builder aBrepBuilder;
175 BRepTools::Read( aResShape, qPrintable(theFilePath), aBrepBuilder );
180 TopoDS_Shape HYDROData_Obstacle::ImportIGES( const QString& theFilePath ) const
182 TopoDS_Shape aResShape;
184 // Set "C" numeric locale to save numbers correctly
185 Kernel_Utils::Localizer loc;
187 IGESControl_Reader aReader;
189 Interface_Static::SetCVal("xstep.cascade.unit","M");
194 IFSelect_ReturnStatus status = aReader.ReadFile(qPrintable(theFilePath));
196 if (status == IFSelect_RetDone) {
198 Handle(IGESData_IGESModel) aModel =
199 Handle(IGESData_IGESModel)::DownCast(aReader.Model());
200 if (!aModel.IsNull()) {
201 IGESData_GlobalSection aGS = aModel->GlobalSection();
203 aModel->SetGlobalSection(aGS);
206 aReader.ClearShapes();
207 aReader.TransferRoots();
209 aResShape = aReader.OneShape();
215 catch(Standard_Failure) {
222 TopoDS_Shape HYDROData_Obstacle::ImportSTEP( const QString& theFilePath ) const
224 TopoDS_Shape aResShape;
226 // Set "C" numeric locale to save numbers correctly
227 Kernel_Utils::Localizer loc;
229 STEPControl_Reader aReader;
232 Interface_Static::SetCVal("xstep.cascade.unit","M");
233 Interface_Static::SetIVal("read.step.ideas", 1);
234 Interface_Static::SetIVal("read.step.nonmanifold", 1);
237 TopoDS_Compound compound;
238 B.MakeCompound(compound);
243 IFSelect_ReturnStatus status = aReader.ReadFile( qPrintable(theFilePath) );
245 if (status == IFSelect_RetDone) {
247 // set UnitFlag to units from file
248 TColStd_SequenceOfAsciiString anUnitLengthNames;
249 TColStd_SequenceOfAsciiString anUnitAngleNames;
250 TColStd_SequenceOfAsciiString anUnitSolidAngleNames;
251 aReader.FileUnits(anUnitLengthNames, anUnitAngleNames, anUnitSolidAngleNames);
252 if (anUnitLengthNames.Length() > 0) {
253 TCollection_AsciiString aLenUnits = anUnitLengthNames.First();
254 if (aLenUnits == "millimetre")
255 Interface_Static::SetCVal("xstep.cascade.unit", "MM");
256 else if (aLenUnits == "centimetre")
257 Interface_Static::SetCVal("xstep.cascade.unit", "CM");
258 else if (aLenUnits == "metre" || aLenUnits.IsEmpty())
259 Interface_Static::SetCVal("xstep.cascade.unit", "M");
260 else if (aLenUnits == "INCH")
261 Interface_Static::SetCVal("xstep.cascade.unit", "INCH");
263 // The file contains not supported units
268 Standard_Boolean failsonly = Standard_False;
269 aReader.PrintCheckLoad(failsonly, IFSelect_ItemsByEntity);
272 Standard_Integer nbr = aReader.NbRootsForTransfer();
273 aReader.PrintCheckTransfer(failsonly, IFSelect_ItemsByEntity);
275 for (Standard_Integer n = 1; n <= nbr; n++) {
276 Standard_Boolean ok = aReader.TransferRoot(n);
277 // Collecting resulting entities
278 Standard_Integer nbs = aReader.NbShapes();
279 if (!ok || nbs == 0) {
280 continue; // skip empty root
282 else if (nbr == 1 && nbs == 1) { // For a single entity
283 aResShape = aReader.Shape(1);
284 // ATTENTION: this is a workaround for mantis issue 0020442 remark 0010776
285 // It should be removed after patching OCCT for bug OCC22436
286 // (fix for OCCT is expected in service pack next to OCCT6.3sp12)
287 if (aResShape.ShapeType() == TopAbs_COMPOUND) {
289 TopoDS_Shape currShape;
290 TopoDS_Iterator It (aResShape, Standard_True, Standard_True);
291 for (; It.More(); It.Next()) {
293 currShape = It.Value();
296 aResShape = currShape;
302 for (Standard_Integer i = 1; i <= nbs; i++) {
303 TopoDS_Shape aShape = aReader.Shape(i);
304 if (aShape.IsNull()) {
308 B.Add(compound, aShape);
313 if (aResShape.IsNull())
314 aResShape = compound;
316 // Check if any BRep entity has been read, there must be at least a vertex
317 if ( !TopExp_Explorer( aResShape, TopAbs_VERTEX ).More() ) {
318 // No geometrical data in the imported file
319 return TopoDS_Shape();
326 catch (Standard_Failure) {
333 QColor HYDROData_Obstacle::getDefaultFillingColor() const
335 return DefaultFillingColor();
338 QColor HYDROData_Obstacle::getDefaultBorderColor() const
340 return DefaultBorderColor();
343 void HYDROData_Obstacle::createGroupObjects()
345 TopoDS_Shape anObstacleShape = GetTopShape();
346 if ( !anObstacleShape.IsNull() )
348 TopTools_SequenceOfShape aWireEdges;
349 HYDROData_ShapesTool::ExploreShapeToShapes( anObstacleShape, TopAbs_EDGE, aWireEdges );
350 if ( !aWireEdges.IsEmpty() )
352 QString aWireGroupName = GetName() + "_Outer_Wire";
354 Handle(HYDROData_ShapesGroup) anExtWireGroup = createGroupObject();
355 anExtWireGroup->SetName( aWireGroupName );
357 anExtWireGroup->SetShapes( aWireEdges );
362 ObjectKind HYDROData_Obstacle::getAltitudeObjectType() const
364 return KIND_OBSTACLE_ALTITUDE;