1 # GEOM GEOMGUI : GUI for Geometry component
3 # Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
4 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
6 # This library is free software; you can redistribute it and/or
7 # modify it under the terms of the GNU Lesser General Public
8 # License as published by the Free Software Foundation; either
9 # version 2.1 of the License.
11 # This library is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 # Lesser General Public License for more details.
16 # You should have received a copy of the GNU Lesser General Public
17 # License along with this library; if not, write to the Free Software
18 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 # See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
24 # File : GeometryGUI_msg_fr.po
29 "Project-Id-Version: PROJECT VERSION\n"
30 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
31 "PO-Revision-Date: YYYY-MM-DD\n"
32 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
33 "Content-Type: text/plain; charset=iso-8859-1\n"
36 #==============================================================================
40 msgid "GEOM_BUT_APPLY"
44 msgid "GEOM_BUT_CLOSE"
48 msgid "GEOM_BUT_CANCEL"
65 msgid "GEOM_BUT_EXPLODE"
69 #==============================================================================
72 #: GeometryGUI.cxx:563
73 msgid "GEOM_INF_LOADED"
74 msgstr "Le fichier %1 est chargé."
77 #==============================================================================
80 #: GeometryGUI.cxx:3069
81 msgid "GEOM_PRP_COMMAND"
82 msgstr "Pas de commande associée à l'id = %1."
84 #: GeometryGUI.cxx:4977
85 msgid "GEOM_PRP_ABORT"
86 msgstr "L'opération a echoué"
88 #: GeometryGUI.cxx:5058
90 msgstr "Opération effectuée"
92 #: GeometryGUI.cxx:3717
93 msgid "GEOM_PRP_LOADING"
94 msgstr "Chargement de %1 ..."
96 #: GeometryGUI.cxx:1412
97 msgid "GEOM_PRP_NULLSHAPE"
98 msgstr "Erreur, objet inconsistant ou inapproprié !"
100 #: GeometryGUI.cxx:5072
101 msgid "GEOM_PRP_READY"
104 #: GeometryGUI.cxx:1690
105 msgid "GEOM_PRP_SELECT_SUBSHAPES"
106 msgstr "Selection de sous objets"
109 msgstr "Confirmer cette operation"
111 msgid "GEOM_CONFIRM_INFO"
112 msgstr "L'objet contient %1 sous objets"
115 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
116 msgstr "Non permis dans viewer VTK"
118 #: GeometryGUI.cxx:1690
119 msgid "GEOM_PRP_SHAPE_IN_STUDY"
120 msgstr "La shape principale doit etre avant dans l'etude"
122 #: GeometryGUI.cxx:1690
123 msgid "GEOM_PRP_SELECT_EDGE"
124 msgstr "Selectionner les edges et clicker sur Apply"
126 #: GeometryGUI.cxx:1690
127 msgid "GEOM_PRP_SELECT_FACE"
128 msgstr "Select les faces a supprimer et clicker sur Ok/Apply"
130 #: GeometryGUI.cxx:1690
131 msgid "GEOM_PRP_SELECT_FIRST"
132 msgstr "Selectionner la shape principale en premier"
134 #: GeometryGUI.cxx:1690
135 msgid "GEOM_PRP_MIN_DIST"
136 msgstr "Min Distance non calculer"
139 #==============================================================================
142 #: GeometryGUI.cxx:3698
143 msgid "GEOM_MEN_ALL_FILES"
144 msgstr "Tous fichiers ( * )"
146 #: GeometryGUI.cxx:4389
147 msgid "GEOM_MEN_ANGLE"
150 #: GeometryGUI.cxx:3941
151 msgid "GEOM_MEN_COMPONENT"
154 #: GeometryGUI.cxx:4389
155 msgid "GEOM_MEN_ENTER_ANGLE"
156 msgstr "Saisir un angle en degrés"
158 #: GeometryGUI.cxx:3758
159 msgid "GEOM_MEN_EXPORT"
162 #: GeometryGUI.cxx:3648
163 msgid "GEOM_MEN_IMPORT"
166 #: GeometryGUI.cxx:3761
167 msgid "GEOM_MEN_IMPORT_BREP"
168 msgstr "Fichiers BREP ( *.brep )"
170 #: GeometryGUI.cxx:3762
171 msgid "GEOM_MEN_IMPORT_IGES"
172 msgstr "Fichiers IGES ( *.iges *.igs )"
174 #: GeometryGUI.cxx:3763
175 msgid "GEOM_MEN_IMPORT_STEP"
176 msgstr "Fichiers STEP ( *.step *.stp )"
178 #: GeometryGUI.cxx:2931
179 msgid "GEOM_MEN_ISOS"
180 msgstr "Choisir un nombre d'isos"
182 #: GeometryGUI.cxx:4278
183 msgid "GEOM_MEN_POPUP_NAME"
186 #: GeometryGUI.cxx:4414
187 msgid "GEOM_MEN_SKETCHER_X"
188 msgstr "Saisir une longueur pour fixer X"
190 #: GeometryGUI.cxx:4438
191 msgid "GEOM_MEN_SKETCHER_Y"
192 msgstr "Saisir une longueur pour fixer Y"
194 #: GeometryGUI.cxx:2898
195 msgid "GEOM_MEN_TRANSPARENCY"
196 msgstr "Transparence"
198 #: GeometryGUI.cxx:4413
202 #: GeometryGUI.cxx:4437
206 #: GeometryGUI_NbIsosDlg.cxx:36
207 msgid "GEOM_MEN_ISOU"
210 #: GeometryGUI_NbIsosDlg.cxx:53
211 msgid "GEOM_MEN_ISOV"
214 #: GeometryGUI_TransparencyDlg.cxx:31
215 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
216 msgstr "Transparence :"
218 msgid "GEOM_MEN_STEP_LABEL"
221 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
222 msgstr "Noms identiques : selectionner avec la souris !"
224 msgid "GEOM_NAME_INCORRECT"
225 msgstr "Le nom saisi n'existe pas"
230 #==============================================================================
233 #: GeometryGUI.cxx:892
234 msgid "GEOM_WRN_RADIUS_NULL"
235 msgstr "Le rayon est nul"
237 #: GeometryGUI.cxx:3854
238 msgid "GEOM_WRN_WARNING"
239 msgstr "Avertissement"
242 #==============================================================================
250 msgid "GEOM_MAIN_OBJECT"
251 msgstr "Objet Principal"
254 msgid "GEOM_TOOL_OBJECT"
258 msgid "GEOM_BASE_OBJECT"
259 msgstr "Objet De Base"
262 msgid "GEOM_PATH_OBJECT"
263 msgstr "Objet Chemin"
270 msgid "GEOM_OBJECT_I"
274 msgid "GEOM_OBJECT_RESULT"
275 msgstr "Objet Et Résultat"
282 msgid "GEOM_BASE_POINT"
283 msgstr "Point De Base"
286 msgid "GEOM_CENTER_POINT"
287 msgstr "Point Centre"
290 msgid "GEOM__DIAGONAL_POINTS"
291 msgstr "Points Diagonaux"
294 msgid "GEOM_CENTRAL_POINT"
295 msgstr "Point Central"
306 msgid "GEOM_ARGUMENTS"
318 msgid "GEOM_RADIUS_I"
334 msgid "GEOM_COORDINATES"
346 msgid "GEOM_REVERSE_U"
350 msgid "GEOM_REVERSE_V"
366 msgid "GEOM_VECTOR_LENGTH"
367 msgstr "Longueur Du Vecteur :"
370 msgid "GEOM_REVERSE_VECTOR"
371 msgstr "Renverser Le Vecteur"
374 msgid "GEOM_PLANE_MIRROR"
378 msgid "GEOM_FACE_SELECTION"
379 msgstr "Selection de Face"
386 msgid "GEOM_WATER_DENSITY"
387 msgstr "Densité de l'eau :"
390 msgid "GEOM_MESHING_DEFLECTION"
391 msgstr "Déflection Du Maillage :"
394 msgid "GEOM_DIMENSIONS"
398 msgid "GEOM_PRECISION"
402 msgid "GEOM_SELECTION"
406 msgid "GEOM_NB_TIMES"
410 msgid "GEOM_NB_TIMES_U"
411 msgstr "Nb. Fois U :"
414 msgid "GEOM_NB_TIMES_V"
415 msgstr "Nb. Fois V :"
430 #==============================================================================
434 msgid "GEOM_PARTITION"
438 msgid "GEOM_TOLERANCE"
442 msgid "GEOM_ORIENTATION"
450 msgid "GEOM_REVOLUTION"
454 msgid "GEOM_ROTATION"
458 msgid "GEOM_ARCHIMEDE"
470 msgid "GEOM_DISTANCE"
475 msgstr "Surface Par Courbes"
494 msgid "GEOM_TRANSLATION"
499 msgstr "Plan de Travail"
510 msgid "GEOM_SUB_SHAPE"
514 msgid "GEOM_SUPRESSFACE"
515 msgstr "Supression de Face"
526 msgid "GEOM_CHECK_SHAPE"
535 msgstr "Boite Anglobante"
539 msgstr "Centre de Masse"
542 msgid "GEOM_PROPERTIES"
543 msgstr "Basiques Proprietes"
546 msgid "GEOM_MULTITRANSLATION"
547 msgstr "Multi-Translation"
550 msgid "GEOM_MULTIROTATION"
551 msgstr "Multi-Rotation"
554 #==============================================================================
570 msgid "GEOM_COMPOUND"
574 msgid "GEOM_COMPOUNDSOLID"
582 msgid "GEOM_CYLINDER"
622 msgid "GEOM_SURFCONE"
623 msgstr "Face Conique"
626 msgid "GEOM_SURFCYLINDER"
627 msgstr "Face Cylindrique"
630 msgid "GEOM_SURFSPHERE"
631 msgstr "Face Sphèrique"
634 msgid "GEOM_SURFTORUS"
635 msgstr "Face Toroique"
646 msgid "GEOM_VECTOR_U"
650 msgid "GEOM_VECTOR_V"
662 msgid "GEOM_PARAMETER"
667 #==============================================================================
711 #==============================================================================
715 msgid "GEOM_STEP_TITLE"
716 msgstr "Increment par défaut lors des constructions"
718 #: GeometryGUI_ArcDlg.cxx:45
719 msgid "GEOM_ARC_TITLE"
720 msgstr "Construction d'un Arc"
722 #: GeometryGUI_ArchimedeDlg.cxx:55
723 msgid "GEOM_ARCHIMEDE_TITLE"
724 msgstr "Construction d'Archimède"
726 #: GeometryGUI_BndBoxDlg.cxx:59
727 msgid "GEOM_BNDBOX_TITLE"
728 msgstr "Boite Englobante"
730 #: GeometryGUI_BndBoxDlg.cxx:82
731 msgid "GEOM_BNDBOX_OBJDIM"
732 msgstr "Objet and ses dimensions"
734 #: GeometryGUI_BoxDlg.cxx:50
735 msgid "GEOM_BOX_TITLE"
736 msgstr "Construction d'une Boite"
738 #: GeometryGUI_BoxDlg.cxx:50
740 msgstr "Dimensions A l'Origine"
742 #: GeometryGUI_ChamferDlg.cxx:58
743 msgid "GEOM_CHAMFER_TITLE"
744 msgstr "Construction d'un Chanfrein"
746 #: GeometryGUI_ChamferDlg.cxx:58
747 msgid "GEOM_CHAMFER_ALL"
748 msgstr "Chanfrein sur toute la Shape"
750 #: GeometryGUI_ChamferDlg.cxx:58
751 msgid "GEOM_CHAMFER_EDGES"
752 msgstr "Chanfrein sur Edges de la Shape"
754 #: GeometryGUI_ChamferDlg.cxx:58
755 msgid "GEOM_CHAMFER_FACES"
756 msgstr "Chanfrein sur Faces de la Shape"
758 #: GeometryGUI_CircleDlg.cxx:48
759 msgid "GEOM_CIRCLE_TITLE"
760 msgstr "Construction d'un Cercle"
762 #: GeometryGUI_CenterMassDlg.cxx:77
763 msgid "GEOM_CMASS_TITLE"
764 msgstr "Centre De Gravité"
766 msgid "GEOM_PLANE_SIZE"
767 msgstr "Taille du plan :"
769 #: GeometryGUI_CommonDlg.cxx:47
770 msgid "GEOM_COMMON_TITLE"
771 msgstr "BOOLEEN : Jonction De Deux Objets"
773 #: GeometryGUI_CompoundDlg.cxx:44
774 msgid "GEOM_COMPOUND_TITLE"
775 msgstr "Création d'un Compound"
777 #: GeometryGUI_ConeDlg.cxx:49
778 msgid "GEOM_CONE_TITLE"
779 msgstr "Construction d'un Cone"
781 #: GeometryGUI_CutDlg.cxx:48
782 msgid "GEOM_CUT_TITLE"
783 msgstr "BOOLEEN : Couper Deux Objets"
785 #: GeometryGUI_CylinderDlg.cxx:47
786 msgid "GEOM_CYLINDER_TITLE"
787 msgstr "Construction d'un Cylindre"
789 #: GeometryGUI_CheckShape.cxx:60
790 msgid "GEOM_CHECK_TITLE"
793 #: GeometryGUI_CheckShape.cxx:83
794 msgid "GEOM_CHECK_INFOS"
795 msgstr "Objet et ses Informations Topologiques"
797 #: GeometryGUI_DistanceDlg.cxx:57
798 msgid "GEOM_MINDIST_TITLE"
799 msgstr "Distance Minimale entre Deux Objets"
801 #: GeometryGUI_DistanceDlg.cxx:57
802 msgid "GEOM_MINDIST_OBJ"
803 msgstr "Objets Et Resultats"
805 #: GeometryGUI_EdgeDlg.cxx:47
806 msgid "GEOM_EDGE_TITLE"
807 msgstr "Création d'un Edge"
809 #: GeometryGUI_FilletDlg.cxx:58
810 msgid "GEOM_FILLET_TITLE"
811 msgstr "Construction d'un Congé"
813 #: GeometryGUI_FilletDlg.cxx:58
814 msgid "GEOM_FILLET_ALL"
815 msgstr "Congé sur toute la Shape"
817 #: GeometryGUI_FilletDlg.cxx:58
818 msgid "GEOM_FILLET_EDGES"
819 msgstr "Congé sur Edges de la Shape"
821 #: GeometryGUI_FilletDlg.cxx:58
822 msgid "GEOM_FILLET_FACES"
823 msgstr "Congé sur Faces de la Shape"
825 #: GeometryGUI_FaceDlg.cxx:49
826 msgid "GEOM_FACE_TITLE"
827 msgstr "Création d'une Face"
829 #: GeometryGUI_FaceDlg.cxx:78
830 msgid "GEOM_FACE_FFW"
831 msgstr "Face a partir d'un wire"
833 #: GeometryGUI_FaceDlg.cxx:103
834 msgid "GEOM_FACE_OPT"
835 msgstr "Création d'une Face plane"
837 #: GeometryGUI_FillingDlg.cxx:53
838 msgid "GEOM_FILLING_TITLE"
839 msgstr "Surface Par Courbes"
841 #: GeometryGUI_FillingDlg.cxx:112
842 msgid "GEOM_FILLING_ARG"
843 msgstr "Argument Et Parametres"
845 #: GeometryGUI_FillingDlg.cxx:128
846 msgid "GEOM_FILLING_MIN_DEG"
849 #: GeometryGUI_FillingDlg.cxx:142
850 msgid "GEOM_FILLING_MAX_DEG"
853 #: GeometryGUI_FillingDlg.cxx:150
854 msgid "GEOM_FILLING_TOL_2D"
857 #: GeometryGUI_FillingDlg.cxx:170
858 msgid "GEOM_FILLING_COMPOUND"
859 msgstr "Compound de Courbes"
861 #: GeometryGUI_FillingDlg.cxx:184
862 msgid "GEOM_FILLING_TOL_3D"
865 #: GeometryGUI_FillingDlg.cxx:192
866 msgid "GEOM_FILLING_NB_ITER"
869 #: GeometryGUI_FuseDlg.cxx:48
870 msgid "GEOM_FUSE_TITLE"
871 msgstr "BOOLEEN : Fusionner deux Objets"
873 #: GeometryGUI_InertiaDlg.cxx:42
874 msgid "GEOM_INERTIA_TITLE"
875 msgstr "Calculs d'Inertie"
877 #: GeometryGUI_InertiaDlg.cxx:50
878 msgid "GEOM_INERTIA_CONSTR"
879 msgstr "Matrice Et Moments d'Inertie"
881 #: GeometryGUI_InertiaDlg.cxx:100
882 msgid "GEOM_INERTIA_I"
885 #: GeometryGUI_InertiaDlg.cxx:182
886 msgid "GEOM_INERTIA_IXYZ"
887 msgstr "IX & IY & IZ"
889 #: GeometryGUI_LineDlg.cxx:50
890 msgid "GEOM_LINE_TITLE"
891 msgstr "Construction d'une Ligne"
893 #: GeometryGUI_MaxToleranceDlg.cxx:53
894 msgid "GEOM_TOLERANCE_TITLE"
895 msgstr "Tolerance Maximale"
897 #: GeometryGUI_MaxToleranceDlg.cxx:84
898 msgid "GEOM_TOLERANCE_CONSTR"
899 msgstr "Object et ses Tolerances"
901 #: GeometryGUI_MaxToleranceDlg.cxx:121
902 msgid "GEOM_TOLERANCE_FACE"
905 #: GeometryGUI_MaxToleranceDlg.cxx:138
906 msgid "GEOM_TOLERANCE_EDGE"
909 #: GeometryGUI_MaxToleranceDlg.cxx:155
910 msgid "GEOM_TOLERANCE_VERTEX"
913 #: GeometryGUI_MirrorDlg.cxx:52
914 msgid "GEOM_MIRROR_TITLE"
915 msgstr "Methode Miroir"
917 #: GeometryGUI_OrientationDlg.cxx:46
918 msgid "GEOM_ORIENTATION_TITLE"
919 msgstr "Changer l'Orientation"
921 #: GeometryGUI_OrientationDlg.cxx:134
922 msgid "GEOM_ORIENTATION_OPT"
923 msgstr "Renverser l'orientation avec une simulation de vecteur normal"
925 #: GeometryGUI_PartitionDlg.cxx:45
926 msgid "GEOM_PARTITION_TITLE"
927 msgstr "Partition d'Objects Avec Outils"
929 #: GeometryGUI_PartitionDlg.cxx:45
930 msgid "GEOM_KEEP_OBJECT"
933 #: GeometryGUI_PartitionDlg.cxx:45
934 msgid "GEOM_PARTITION_ORIENTATION"
935 msgstr "Change l'orientation"
937 #: GeometryGUI_PipeDlg.cxx:47
938 msgid "GEOM_PIPE_TITLE"
939 msgstr "Construction d'une Pipe"
941 #: GeometryGUI_PointDlg.cxx:52
942 msgid "GEOM_POINT_TITLE"
943 msgstr "Construction d'un Point"
945 #: GeometryGUI_PlaneDlg.cxx:60
946 msgid "GEOM_PLANE_TITLE"
947 msgstr "Construction d'un Plan"
949 #: GeometryGUI_PlaneDlg.cxx:172
950 msgid "GEOM_PLANE_PVC"
951 msgstr "Point + Vecteur Coordonnes"
953 #: GeometryGUI_PlaneDlg.cxx:133
954 msgid "GEOM_PLANE_PV"
955 msgstr "Point + Vecteur"
957 #: GeometryGUI_PrismDlg.cxx:54
958 msgid "GEOM_PRISM_TITLE"
959 msgstr "Extruder une Shape de base"
961 #: GeometryGUI_PrismDlg.cxx:83
962 msgid "GEOM_PRISM_BSV"
963 msgstr "Shape de base + Vecteur"
965 #: GeometryGUI_PropertiesDlg.cxx:56
966 msgid "GEOM_PROPERTIES_TITLE"
967 msgstr "Proprietes Basiques"
969 #: GeometryGUI_PropertiesDlg.cxx:78
970 msgid "GEOM_PROPERTIES_CONSTR"
971 msgstr "Objet et ses Proprietes"
973 #: GeometryGUI_PropertiesDlg.cxx:114
974 msgid "GEOM_PROPERTIES_SURFACE"
977 #: GeometryGUI_PropertiesDlg.cxx:120
978 msgid "GEOM_PROPERTIES_VOLUME"
981 #: GeometryGUI_RevolDlg.cxx:49
982 msgid "GEOM_REVOLUTION_TITLE"
983 msgstr "Construction Par Revolution"
985 #: GeometryGUI_RotationDlg.cxx:51
986 msgid "GEOM_ROTATION_TITLE"
987 msgstr "Rotation d'un Objet"
989 #: GeometryGUI_ScaleDlg.cxx:52
990 msgid "GEOM_SCALE_TITLE"
991 msgstr "Echelle d'un Objet"
993 #: GeometryGUI_ScaleDlg.cxx:117
994 msgid "GEOM_SCALE_FACTOR"
995 msgstr "Facteur d'echelle"
997 #: GeometryGUI_SectionDlg.cxx:50
998 msgid "GEOM_SECTION_TITLE"
999 msgstr "BOOLEEN : Section De Deux Objets"
1001 #: GeometryGUI_SewingDlg.cxx:48
1002 msgid "GEOM_SEWING_TITLE"
1003 msgstr "Coudre des Topologies"
1005 #: GeometryGUI_ShellDlg.cxx:53
1006 msgid "GEOM_SHELL_TITLE"
1007 msgstr "Construction d'une Shell"
1009 #: GeometryGUI_ShellDlg.cxx:74
1010 msgid "GEOM_SHELL_LIST"
1011 msgstr "List de Faces Connectees"
1013 #: GeometryGUI_SphereDlg.cxx:50
1014 msgid "GEOM_SPHERE_TITLE"
1015 msgstr "Construction d'une Sphere"
1017 #: GeometryGUI_SphereDlg.cxx:113
1018 msgid "GEOM_SPHERE_CR"
1019 msgstr "Centre + rayon"
1021 #: GeometryGUI_SphereDlg.cxx:146
1022 msgid "GEOM_SPHERE_RO"
1023 msgstr "Rayon a l'origine"
1025 #: GeometryGUI_SubShapeDlg.cxx:55
1026 msgid "GEOM_SUBSHAPE_TITLE"
1027 msgstr "Selection de Sous Shapes"
1029 #: GeometryGUI_SubShapeDlg.cxx:131
1030 msgid "GEOM_SUBSHAPE_TYPE"
1031 msgstr "Type de Sous Shapes"
1033 #: GeometryGUI_SubShapeDlg.cxx:137
1034 msgid "GEOM_SUBSHAPE_SELECT"
1035 msgstr "Selectionner de Sous Shapes"
1037 #: GeometryGUI_TorusDlg.cxx:51
1038 msgid "GEOM_TORUS_TITLE"
1039 msgstr "Constructiond'un Tore"
1041 #: GeometryGUI_SuppressFacesDlg.cxx:103
1042 msgid "GEOM_SUPRESSFACE_TITLE"
1043 msgstr "Supprimer des Faces dans un Objet"
1045 #: GeometryGUI_SuppressFacesDlg.cxx:164
1046 msgid "GEOM_SUPRESSFACE_SELECT"
1047 msgstr "Selectionner les Faces a Supprimer"
1049 #: GeometryGUI_TranslationDlg.cxx:78
1050 msgid "GEOM_TRANSLATION_COOR"
1051 msgstr "Translation Avec Coordonnees"
1053 msgid "GEOM_TRANSPARENCY_TITLE"
1054 msgstr "Transparence"
1056 msgid "GEOM_TRANSPARENCY_OPAQUE"
1059 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1060 msgstr "Transparent"
1062 msgid "GEOM_SUPPRESSHOLE_TITLE"
1063 msgstr "Suppression de trous"
1065 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1066 msgstr "Selection de la face initiale"
1068 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1069 msgstr "Selection du contour/trou sur la face"
1071 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1072 msgstr "Selection de la face terminale (si trou traversant)"
1074 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1075 msgstr "Selection de contour final (si trou traversant)"
1077 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1078 msgstr "Face ou shell"
1080 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1081 msgstr "Selection de trou(s) sur la face"
1083 #: GeometryGUI_TranslationDlg.cxx:56
1084 msgid "GEOM_TRANSLATION_TITLE"
1085 msgstr "Translation d'un Objet"
1087 #: GeometryGUI_VectorDlg.cxx:54
1088 msgid "GEOM_VECTOR_TITLE"
1089 msgstr "Construction d'un Vecteur"
1091 #: GeometryGUI_WhatisDlg.cxx:63
1092 msgid "GEOM_WHATIS_TITLE"
1095 #: GeometryGUI_WhatisDlg.cxx:86
1096 msgid "GEOM_WHATIS_OBJECT"
1097 msgstr "Objet et ses Informations Topologiques"
1099 #: GeometryGUI_WireDlg.cxx:46
1100 msgid "GEOM_WIRE_TITLE"
1101 msgstr "Creer un Wire"
1103 #: GeometryGUI_WireDlg.cxx:103
1104 msgid "GEOM_WIRE_CONNECT"
1105 msgstr "Creation d'un Wire a partir de wires/edges connectes"
1107 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1108 msgid "GEOM_WPALNE_TITLE"
1109 msgstr "plan de travail"
1111 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1112 msgid "GEOM_WPALNE_FACE"
1113 msgstr "Plan Ou Face plane"
1115 #: GeometryGUI_multiTranslationDlg.cxx:107
1116 msgid "GEOM_MULTITRANSLATION_TITLE"
1117 msgstr "Multi-Translation"
1119 #: GeometryGUI_multiTranslationDlg.cxx:107
1120 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1121 msgstr "Multi Translation Simple"
1123 #: GeometryGUI_multiTranslationDlg.cxx:107
1124 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1125 msgstr "Multi Translation Double"
1127 #: GeometryGUI_multiRotationDlg.cxx:107
1128 msgid "GEOM_MULTIROTATION_TITLE"
1129 msgstr "Multi-Rotation"
1131 #: GeometryGUI_multiRotationDlg.cxx:107
1132 msgid "GEOM_MULTIROTATION_SIMPLE"
1133 msgstr "Multi Rotation Simple"
1135 #: GeometryGUI_multiRotationDlg.cxx:107
1136 msgid "GEOM_MULTIROTATION_DOUBLE"
1137 msgstr "Multi Rotation Double"
1139 msgid "GEOM_PARAM_POINT"
1140 msgstr "Point paramétrique"
1143 #==============================================================================
1146 #: GeometryGUI.cxx:4613
1147 msgid "GEOM_MEN_WIREFRAME"
1150 #: GeometryGUI.cxx:4613
1151 msgid "GEOM_MEN_SHADING"