src/GEOMGUI/GEOM_msg_ja.ts

   1 <?xml version="1.0" encoding="utf-8"?>
   2 <!DOCTYPE TS>
   3 <TS version="2.0" language="ja" sourcelanguage="en">
   4   <context>
   5     <name>@default</name>
   6     <message>
   7       <source>BRep_API: command not done</source>
   8       <translation>エラー: オブジェクトをビルドできませんでした</translation>
   9     </message>
  10     <message>
  11       <source>PAL_NOT_DONE_ERROR</source>
  12       <translation>操作は中断されました</translation>
  13     </message>
  14     <message>
  15       <source>CHANGE_ORIENTATION_NEW_OBJ_NAME</source>
  16       <translation>Invert</translation>
  17     </message>
  18     <message>
  19       <source>EDGE_WIDTH_TLT</source>
  20       <translation>エッジの厚さ</translation>
  21     </message>
  22     <message>
  23       <source>ISOS_WIDTH_TLT</source>
  24       <translation>Iso の厚さ</translation>
  25     </message>
  26     <message>
  27       <source>CLOSE_CONTOUR_NEW_OBJ_NAME</source>
  28       <translation>CloseContour</translation>
  29     </message>
  30     <message>
  31       <source>DEP_OBJECT</source>
  32       <translation>選択したオブジェクトは、別のオブジェクトの作成に使用されました。このオブジェクトを削除する、python にエクスポートが無効になっている可能性があります。</translation>
  33     </message>
  34     <message>
  35       <source>DEVIDE_EDGE_NEW_OBJECT_NAME</source>
  36       <translation>NewObject</translation>
  37     </message>
  38     <message>
  39       <source>DEVIDE_EDGE_BAD_PROJ_MSG</source>
  40       <translation>エッジ外側の投影</translation>
  41     </message>
  42     <message>
  43       <source>DEVIDE_EDGE_BY_PROJ_POINT</source>
  44       <translation>投影点</translation>
  45     </message>
  46     <message>
  47       <source>ERROR_SHAPE_TYPE</source>
  48       <translation>選択したオブジェクトの種類が正しくありません！\nフェース、シェルまたはソリッドを選択し、もう一度やり直してください。</translation>
  49     </message>
  50     <message>
  51       <source> iErr : 10</source>
  52       <translation>分類子が NULL です。</translation>
  53     </message>
  54     <message>
  55       <source> iErr : 11</source>
  56       <translation>フォームが NULL です。</translation>
  57     </message>
  58     <message>
  59       <source> iErr : 12</source>
  60       <translation>不正なオブジェクト型</translation>
  61     </message>
  62     <message>
  63       <source> iErr : 13</source>
  64       <translation>この状態は許可されていません</translation>
  65     </message>
  66     <message>
  67       <source> iErr : 15</source>
  68       <translation>このサーフェスタイプは許可されていません</translation>
  69     </message>
  70     <message>
  71       <source> iErr : 20</source>
  72       <translation>三角パッチは見つかりませんでした。</translation>
  73     </message>
  74     <message>
  75       <source> iErr : 30</source>
  76       <translation>行のリンクを取得できませんでした</translation>
  77     </message>
  78     <message>
  79       <source> iErr : 40</source>
  80       <translation>ポイントを分類できません。</translation>
  81     </message>
  82     <message>
  83       <source> iErr : 41</source>
  84       <translation>拡張子が無効のデータです</translation>
  85     </message>
  86     <message>
  87       <source>GEOM_2D_CONTINUTY</source>
  88       <translation>2Dコネクティビティ</translation>
  89     </message>
  90     <message>
  91       <source>GEOM_2D_CURVE_MODE</source>
  92       <translation>2D曲線モード</translation>
  93     </message>
  94     <message>
  95       <source>GEOM_2D_TOLERANCE</source>
  96       <translation>2D公差</translation>
  97     </message>
  98     <message>
  99       <source>GEOM_3D_CONTINUTY</source>
 100       <translation>3Dコネクティビティ</translation>
 101     </message>
 102     <message>
 103       <source>GEOM_3D_CURVE_MODE</source>
 104       <translation>3D曲線モード</translation>
 105     </message>
 106     <message>
 107       <source>GEOM_3D_TOLERANCE</source>
 108       <translation>3D公差</translation>
 109     </message>
 110     <message>
 111       <source>GEOM_3_POINTS</source>
 112       <translation>3 点</translation>
 113     </message>
 114     <message>
 115       <source>GEOM_ADD_POINT</source>
 116       <translation>点の追加</translation>
 117     </message>
 118     <message>
 119       <source>GEOM_ANGLE</source>
 120       <translation>角度:</translation>
 121     </message>
 122     <message>
 123       <source>GEOM_ANGLES</source>
 124       <translation>角度</translation>
 125     </message>
 126     <message>
 127       <source>GEOM_ANGLE_2</source>
 128       <translation>2 の角度:</translation>
 129     </message>
 130     <message>
 131       <source>GEOM_ANGLE_1</source>
 132       <translation>角度</translation>
 133     </message>
 134     <message>
 135       <source>GEOM_ANGLE_STEP</source>
 136       <translation>角度ピッチ：</translation>
 137     </message>
 138     <message>
 139       <source>GEOM_ARC_ELLIPSE</source>
 140       <translation>楕円の弧</translation>
 141     </message>
 142     <message>
 143       <source>GEOM_ARC</source>
 144       <translation>円弧</translation>
 145     </message>
 146     <message>
 147       <source>GEOM_ARCHIMEDE</source>
 148       <translation>Archimede</translation>
 149     </message>
 150     <message>
 151       <source>GEOM_ARCHIMEDE_TITLE</source>
 152       <translation>アルキメデス法</translation>
 153     </message>
 154     <message>
 155       <source>GEOM_ARC_TITLE</source>
 156       <translation>円弧の作成</translation>
 157     </message>
 158     <message>
 159       <source>GEOM_ARGUMENTS</source>
 160       <translation>引数</translation>
 161     </message>
 162     <message>
 163       <source>GEOM_AXE_MIRROR</source>
 164       <translation>対称軸</translation>
 165     </message>
 166     <message>
 167       <source>GEOM_AXIS</source>
 168       <translation>軸</translation>
 169     </message>
 170     <message>
 171       <source>GEOM_BASE</source>
 172       <translation>ベース</translation>
 173     </message>
 174     <message>
 175       <source>GEOM_BASE_OBJECT</source>
 176       <translation>ベース オブジェクト</translation>
 177     </message>
 178     <message>
 179       <source>GEOM_BASE_POINT</source>
 180       <translation>基準点</translation>
 181     </message>
 182     <message>
 183       <source>GEOM_BEZIER</source>
 184       <translation>ベジエ</translation>
 185     </message>
 186     <message>
 187       <source>GEOM_BINORMAL</source>
 188       <translation>従法線ベクトル</translation>
 189     </message>
 190     <message>
 191       <source>GEOM_BLOCK</source>
 192       <translation>六面体のソリッド</translation>
 193     </message>
 194     <message>
 195       <source>GEOM_BLOCKS_COMPOUND</source>
 196       <translation>ブロックアセンブリ</translation>
 197     </message>
 198     <message>
 199       <source>GEOM_BLOCK_EXPLODE</source>
 200       <translation>符号化手法</translation>
 201     </message>
 202     <message>
 203       <source>GEOM_BLOCK_EXPLODE_TITLE</source>
 204       <translation>サブブロックの選択</translation>
 205     </message>
 206     <message>
 207       <source>GEOM_BLOCK_MULTITRSF</source>
 208       <translation>Block Multi-Transformation</translation>
 209     </message>
 210     <message>
 211       <source>GEOM_BLOCK_MULTITRSF_DOUBLE</source>
 212       <translation>Multi-transformation ダブル</translation>
 213     </message>
 214     <message>
 215       <source>GEOM_BLOCK_MULTITRSF_SIMPLE</source>
 216       <translation>簡単な multi-transformation</translation>
 217     </message>
 218     <message>
 219       <source>GEOM_BLOCK_MULTITRSF_TITLE</source>
 220       <translation>ブロックの複数回移動</translation>
 221     </message>
 222     <message>
 223       <source>GEOM_BLOCK_TITLE</source>
 224       <translation>六面体ソリッドの構築</translation>
 225     </message>
 226     <message>
 227       <source>GEOM_BNDBOX</source>
 228       <translation>Bounding Box</translation>
 229     </message>
 230     <message>
 231       <source>GEOM_BNDBOX_OBJDIM</source>
 232       <translation>オブジェクトとその寸法</translation>
 233     </message>
 234     <message>
 235       <source>GEOM_BNDBOX_TITLE</source>
 236       <translation>境界ボックス</translation>
 237     </message>
 238     <message>
 239       <source>GEOM_BOX</source>
 240       <translation>Box</translation>
 241     </message>
 242     <message>
 243       <source>GEOM_BOX_OBJ</source>
 244       <translation>寸法</translation>
 245     </message>
 246     <message>
 247       <source>GEOM_BOX_TITLE</source>
 248       <translation>ボックスの作成</translation>
 249     </message>
 250     <message>
 251       <source>GEOM_BSplineRestriction</source>
 252       <translation>制限 BSpline</translation>
 253     </message>
 254     <message>
 255       <source>GEOM_BUT_APPLY</source>
 256       <translation>適用(&amp;A)</translation>
 257     </message>
 258     <message>
 259       <source>GEOM_BUT_CANCEL</source>
 260       <translation>キャンセル(&amp;C)</translation>
 261     </message>
 262     <message>
 263       <source>GEOM_BUT_CLOSE</source>
 264       <translation>閉じる(&amp;C)</translation>
 265     </message>
 266     <message>
 267       <source>GEOM_BUT_CLOSE_SKETCH</source>
 268       <translation>スケッチを終了</translation>
 269     </message>
 270     <message>
 271       <source>GEOM_BUT_END_SKETCH</source>
 272       <translation>スケッチを検証</translation>
 273     </message>
 274     <message>
 275       <source>GEOM_BUT_EXPLODE</source>
 276       <translation>展開(&amp;E)</translation>
 277     </message>
 278     <message>
 279       <source>GEOM_BUT_HELP</source>
 280       <translation>ヘルプ(&amp;H)</translation>
 281     </message>
 282     <message>
 283       <source>GEOM_BUT_NO</source>
 284       <translation>いいえ(&amp;N)</translation>
 285     </message>
 286     <message>
 287       <source>GEOM_BUT_OK</source>
 288       <translation>はい(&amp;k)</translation>
 289     </message>
 290     <message>
 291       <source>GEOM_BUT_APPLY_AND_CLOSE</source>
 292       <translation>適用して閉じる(&amp;p)</translation>
 293     </message>
 294     <message>
 295       <source>GEOM_BUT_YES</source>
 296       <translation>はい(&amp;Y)</translation>
 297     </message>
 298     <message>
 299       <source>GEOM_BY_LENGTH</source>
 300       <translation>長さで</translation>
 301     </message>
 302     <message>
 303       <source>GEOM_BY_PARAMETER</source>
 304       <translation>パラメーターで</translation>
 305     </message>
 306     <message>
 307       <source>GEOM_CENTER</source>
 308       <translation>センター</translation>
 309     </message>
 310     <message>
 311       <source>GEOM_CENTER_DEFAULT</source>
 312       <translation>デフォルトでは原点</translation>
 313     </message>
 314     <message>
 315       <source>GEOM_CENTER_POINT</source>
 316       <translation>中心点</translation>
 317     </message>
 318     <message>
 319       <source>GEOM_CENTRAL_POINT</source>
 320       <translation>中心点</translation>
 321     </message>
 322     <message>
 323       <source>GEOM_CHAMFER</source>
 324       <translation>Chamfer</translation>
 325     </message>
 326     <message>
 327       <source>GEOM_CHAMFER_ABORT</source>
 328       <translation>%1 と %2 の面取りを計算することはできません。</translation>
 329     </message>
 330     <message>
 331       <source>GEOM_CHAMFER_ALL</source>
 332       <translation>上のオブジェクトの面取り</translation>
 333     </message>
 334     <message>
 335       <source>GEOM_CHAMFER_EDGES</source>
 336       <translation>上のエッジの面取り</translation>
 337     </message>
 338     <message>
 339       <source>GEOM_CHAMFER_FACES</source>
 340       <translation>選択面の面取り</translation>
 341     </message>
 342     <message>
 343       <source>GEOM_CHAMFER_TITLE</source>
 344       <translation>面取りの構築</translation>
 345     </message>
 346     <message>
 347       <source>GEOM_CHANGE_ORIENTATION</source>
 348       <translation>オブジェクトを変更します。</translation>
 349     </message>
 350     <message>
 351       <source>GEOM_CHANGE_DIRECTION</source>
 352       <translation>方向を変更します。</translation>
 353     </message>
 354     <message>
 355       <source>GEOM_CHANGE_ORIENTATION_TITLE</source>
 356       <translation>向きを変更します。</translation>
 357     </message>
 358     <message>
 359       <source>GEOM_CHECK_BLOCKS_COMPOUND</source>
 360       <translation>ブロックのアセンブリチェック</translation>
 361     </message>
 362     <message>
 363       <source>GEOM_CHECK_BLOCKS_COMPOUND_FAILED</source>
 364       <translation>監査つながっていません。</translation>
 365     </message>
 366     <message>
 367       <source>GEOM_CHECK_BLOCKS_COMPOUND_ERRORS</source>
 368       <translation>エラー</translation>
 369     </message>
 370     <message>
 371       <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS</source>
 372       <translation>アセンブリ ブロックのエラーが含まれています。</translation>
 373     </message>
 374     <message>
 375       <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS</source>
 376       <translation>アセンブリのブロックにはエラーがありません。</translation>
 377     </message>
 378     <message>
 379       <source>GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES</source>
 380       <translation>サブオブジェクト</translation>
 381     </message>
 382     <message>
 383       <source>GEOM_CHECK_BLOCKS_NOT_BLOCK</source>
 384       <translation>ブロックでない</translation>
 385     </message>
 386     <message>
 387       <source>GEOM_CHECK_BLOCKS_EXTRA_EDGE</source>
 388       <translation>追加のエッジ</translation>
 389     </message>
 390     <message>
 391       <source>GEOM_CHECK_BLOCKS_INVALID_CONNECTION</source>
 392       <translation>有効な接続でない # %1</translation>
 393     </message>
 394     <message>
 395       <source>GEOM_CHECK_BLOCKS_NOT_CONNECTED</source>
 396       <translation>接続されていない</translation>
 397     </message>
 398     <message>
 399       <source>GEOM_CHECK_BLOCKS_NOT_GLUED</source>
 400       <translation>接着していない # %1</translation>
 401     </message>
 402     <message>
 403       <source>GEOM_GETNONBLOCKS_TITLE</source>
 404       <translation>四角形の固体非 hexahedres と顔以外-上側を取得します。</translation>
 405     </message>
 406     <message>
 407       <source>GEOM_GETNONBLOCKS</source>
 408       <translation>固体非ブロックを取得します。</translation>
 409     </message>
 410     <message>
 411       <source>GEOM_NONBLOCKS</source>
 412       <translation>GroupeSolidesNonBlocs</translation>
 413     </message>
 414     <message>
 415       <source>GEOM_USE_C1_CRITERION</source>
 416       <translation>C1 criterion の使用</translation>
 417     </message>
 418     <message>
 419       <source>GEOM_CHECK_INFOS</source>
 420       <translation>オブジェクトとその位相情報</translation>
 421     </message>
 422     <message>
 423       <source>GEOM_CHECK_SELF_INTERSECTIONS</source>
 424       <translation>自己交差の検出</translation>
 425     </message>
 426     <message>
 427       <source>GEOM_FAST_CHECK_INTERSECTIONS</source>
 428       <translation>クイック交点</translation>
 429     </message>
 430     <message>
 431       <source>GEOM_SHAPE_STATISTICS</source>
 432       <translation>形状の統計</translation>
 433     </message>
 434     <message>
 435       <source>GEOM_CIRCLE</source>
 436       <translation>Circle</translation>
 437     </message>
 438     <message>
 439       <source>GEOM_CIRCLE_TITLE</source>
 440       <translation>円の作成</translation>
 441     </message>
 442     <message>
 443       <source>GEOM_CLOSECONTOUR_TITLE</source>
 444       <translation>スケッチを終了</translation>
 445     </message>
 446     <message>
 447       <source>GEOM_CMASS</source>
 448       <translation>重心</translation>
 449     </message>
 450     <message>
 451       <source>GEOM_CMASS_TITLE</source>
 452       <translation>重心の作成</translation>
 453     </message>
 454     <message>
 455       <source>GEOM_COMMON</source>
 456       <translation>Common</translation>
 457     </message>
 458     <message>
 459       <source>GEOM_COMMON_TITLE</source>
 460       <translation>オブジェクトの交差部分</translation>
 461     </message>
 462     <message>
 463       <source>GEOM_COMPOUND</source>
 464       <translation>Compound</translation>
 465     </message>
 466     <message>
 467       <source>GEOM_COMPOUNDSOLID</source>
 468       <translation>固体のアセンブリ</translation>
 469     </message>
 470     <message>
 471       <source>GEOM_COMPSOLIDS</source>
 472       <translation>複合ソリッド</translation>
 473     </message>
 474     <message>
 475       <source>GEOM_COMPOUND_TITLE</source>
 476       <translation>コンパウンドの作成</translation>
 477     </message>
 478     <message>
 479       <source>GEOM_CONE</source>
 480       <translation>Cone</translation>
 481     </message>
 482     <message>
 483       <source>GEOM_CONE_TITLE</source>
 484       <translation>円錐の作成</translation>
 485     </message>
 486     <message>
 487       <source>GEOM_CONFIRM</source>
 488       <translation>操作を確認します。</translation>
 489     </message>
 490     <message>
 491       <source>GEOM_CONFIRM_INFO</source>
 492       <translation>オブジェクトには %1 のサブオブジェクトが含まれています ！</translation>
 493     </message>
 494     <message>
 495       <source>GEOM_COOR</source>
 496       <translation>代：:</translation>
 497     </message>
 498     <message>
 499       <source>GEOM_COORDINATES</source>
 500       <translation>座標</translation>
 501     </message>
 502     <message>
 503       <source>GEOM_COORDINATES_RES</source>
 504       <translation>結果の座標</translation>
 505     </message>
 506     <message>
 507       <source>GEOM_CREATE_COPY</source>
 508       <translation>コピーを作成</translation>
 509     </message>
 510     <message>
 511       <source>GEOM_CREATE_SINGLE_SOLID</source>
 512       <translation>1 つのソリッドを作成します。</translation>
 513     </message>
 514     <message>
 515       <source>GEOM_CURVE</source>
 516       <translation>Curve</translation>
 517     </message>
 518     <message>
 519       <source>GEOM_CURVE_CONTINUTY</source>
 520       <translation>曲線の継続性</translation>
 521     </message>
 522     <message>
 523       <source>GEOM_CURVE_TITLE</source>
 524       <translation>曲線の作成</translation>
 525     </message>
 526     <message>
 527       <source>GEOM_CUT</source>
 528       <translation>Cut</translation>
 529     </message>
 530     <message>
 531       <source>GEOM_CUT_TITLE</source>
 532       <translation>オブジェクトの切り抜き</translation>
 533     </message>
 534     <message>
 535       <source>GEOM_CYLINDER</source>
 536       <translation>Cylinder</translation>
 537     </message>
 538     <message>
 539       <source>GEOM_CYLINDER_TITLE</source>
 540       <translation>円柱の作成</translation>
 541     </message>
 542     <message>
 543       <source>GEOM_CYLINDER_ANGLE_ERR</source>
 544       <translation>角度値0°と360°はボリューム構築には不適切です。標準の円筒構築機能を使用するために角度ボックスのチェックを外してください。</translation>
 545     </message>
 546     <message>
 547       <source>GEOM_D1</source>
 548       <translation>D1 を：</translation>
 549     </message>
 550     <message>
 551       <source>GEOM_D2</source>
 552       <translation>D2:</translation>
 553     </message>
 554     <message>
 555       <source>GEOM_DETECT</source>
 556       <translation>検出</translation>
 557     </message>
 558     <message>
 559       <source>GEOM_DIAGONAL_POINTS</source>
 560       <translation>対角点</translation>
 561     </message>
 562     <message>
 563       <source>GEOM_DISK</source>
 564       <translation>Disk</translation>
 565     </message>
 566     <message>
 567       <source>GEOM_DISK_TITLE</source>
 568       <translation>ディスクの作成</translation>
 569     </message>
 570     <message>
 571       <source>GEOM_DIMENSIONS</source>
 572       <translation>寸法</translation>
 573     </message>
 574     <message>
 575       <source>GEOM_SKETCHER_DIST</source>
 576       <translation>距離</translation>
 577     </message>
 578     <message>
 579       <source>GEOM_DISTANCE</source>
 580       <translation>距離</translation>
 581     </message>
 582     <message>
 583       <source>GEOM_DIVIDE_EDGE_TITLE</source>
 584       <translation>ポイントを追加</translation>
 585     </message>
 586     <message>
 587       <source>GEOM_DX</source>
 588       <translation>Dx :</translation>
 589     </message>
 590     <message>
 591       <source>GEOM_DY</source>
 592       <translation>Dy :</translation>
 593     </message>
 594     <message>
 595       <source>GEOM_DZ</source>
 596       <translation>Dz :</translation>
 597     </message>
 598     <message>
 599       <source>GEOM_DropSmallEdges</source>
 600       <translation>マイナーなエッジを省略</translation>
 601     </message>
 602     <message>
 603       <source>GEOM_DRAFT_ANGLE</source>
 604       <translation>抜け勾配</translation>
 605     </message>
 606     <message>
 607       <source>GEOM_EDGE</source>
 608       <translation>Edge</translation>
 609     </message>
 610     <message>
 611       <source>GEOM_EDGES</source>
 612       <translation>エッジ</translation>
 613     </message>
 614     <message>
 615       <source>GEOM_EDGE_TITLE</source>
 616       <translation>エッジを作成</translation>
 617     </message>
 618     <message>
 619       <source>GEOM_ELLIPSE</source>
 620       <translation>Ellipse</translation>
 621     </message>
 622     <message>
 623       <source>GEOM_ELLIPSE_ERROR_1</source>
 624       <translation>楕円を作成できません: 小さな半分軸が大きい、半分は主要な軸。</translation>
 625     </message>
 626     <message>
 627       <source>GEOM_ELLIPSE_TITLE</source>
 628       <translation>楕円の作成</translation>
 629     </message>
 630     <message>
 631       <source>GEOM_END_LCS</source>
 632       <translation>終わりの局所座標</translation>
 633     </message>
 634     <message>
 635       <source>GEOM_ERROR</source>
 636       <translation>エラー</translation>
 637     </message>
 638     <message>
 639       <source>GEOM_ERROR_STATUS</source>
 640       <translation>操作のステータス</translation>
 641     </message>
 642     <message>
 643       <source>GEOM_ERR_GET_ENGINE</source>
 644       <translation>GEOM エンジン コンポーネントを取得することはできません。ジオメトリ モジュールを再開してから、もう一度やり直してください。</translation>
 645     </message>
 646     <message>
 647       <source>GEOM_ERR_LIB_NOT_FOUND</source>
 648       <translation>ユーザーのアクションに対応するGUI ライブラリを開くことはできないか、既に開いています。</translation>
 649     </message>
 650     <message>
 651       <source>GEOM_EXTRUDED_CUT_TITLE</source>
 652       <translation>押出成形材料の除去</translation>
 653     </message>
 654     <message>
 655       <source>GEOM_EXTRUDED_CUT</source>
 656       <translation>Enlevement_extrude</translation>
 657     </message>
 658     <message>
 659       <source>GEOM_EXTRUDED_BOSS_TITLE</source>
 660       <translation>押出し</translation>
 661     </message>
 662     <message>
 663       <source>GEOM_EXTRUDED_BOSS</source>
 664       <translation>Bossage_extrude</translation>
 665     </message>
 666     <message>
 667       <source>GEOM_EXTRUSION</source>
 668       <translation>Extrusion</translation>
 669     </message>
 670     <message>
 671       <source>GEOM_EXTRUSION_BSV</source>
 672       <translation>ベクトルの基本図形</translation>
 673     </message>
 674     <message>
 675       <source>GEOM_EXTRUSION_BSV_2P</source>
 676       <translation>フォームの基本 2 ポイント</translation>
 677     </message>
 678     <message>
 679       <source>GEOM_EXTRUSION_DXDYDZ</source>
 680       <translation>DX DY DZ のベクトルのフォームを基本します。</translation>
 681     </message>
 682     <message>
 683       <source>GEOM_EXTRUSION_TITLE</source>
 684       <translation>面の押出し</translation>
 685     </message>
 686     <message>
 687       <source>GEOM_THICKNESS_TITLE</source>
 688       <translation>厚みの構築</translation>
 689     </message>
 690     <message>
 691       <source>GEOM_THICKNESS_NAME</source>
 692       <translation>Thickness</translation>
 693     </message>
 694     <message>
 695       <source>GEOM_TOWARDS_INSIDE</source>
 696       <translation>内側への厚み</translation>
 697     </message>
 698     <message>
 699       <source>GEOM_SCALE_PRISM</source>
 700       <translation>面のサイズを変えながら押し出す</translation>
 701     </message>
 702     <message>
 703       <source>GEOM_FACE</source>
 704       <translation>Face</translation>
 705     </message>
 706     <message>
 707       <source>GEOM_CS</source>
 708       <translation>座標系</translation>
 709     </message>
 710     <message>
 711       <source>GEOM_GCS</source>
 712       <translation>グローバル座標系</translation>
 713     </message>
 714     <message>
 715       <source>GEOM_LCS</source>
 716       <translation>ローカル座標系</translation>
 717     </message>
 718     <message>
 719       <source>GEOM_LOCATIONS</source>
 720       <translation>位置</translation>
 721     </message>
 722     <message>
 723       <source>GEOM_FACES</source>
 724       <translation>Faces</translation>
 725     </message>
 726     <message>
 727       <source>GEOM_FACE_FFW</source>
 728       <translation>顔輪郭またはエッジからの作成</translation>
 729     </message>
 730     <message>
 731       <source>GEOM_FACE_FROM_SURFACE</source>
 732       <translation>ワイヤによる境界面からの面作成</translation>
 733     </message>
 734     <message>
 735       <source>GEOM_FACE_OPT</source>
 736       <translation>平らなフェースを作成</translation>
 737     </message>
 738     <message>
 739       <source>GEOM_FACE_FFWC</source>
 740       <translation>ワイヤと拘束点からの面作成</translation>
 741     </message>
 742     <message>
 743       <source>GEOM_CONSTRAINTS</source>
 744       <translation>拘束</translation>
 745     </message>
 746     <message>
 747       <source>GEOM_FACE_CONSTRAINT</source>
 748       <translation>拘束面</translation>
 749     </message>
 750     <message>
 751       <source>GEOM_SOLID_FROM_FACE_OPT</source>
 752       <translation>形状の交差・縫合</translation>
 753     </message>
 754     <message>
 755       <source>MAKE_FACE_TOLERANCE_TOO_BIG</source>
 756       <translation>平坦な面を作成できません: 作成された顔があまりにも高い耐性</translation>
 757     </message>
 758     <message>
 759       <source>GEOM_FACE_OR_LCS</source>
 760       <translation>フェース または LCS</translation>
 761     </message>
 762     <message>
 763       <source>GEOM_FACE_SELECTION</source>
 764       <translation>顔の選択</translation>
 765     </message>
 766     <message>
 767       <source>GEOM_FACE_TITLE</source>
 768       <translation>フェースの作成</translation>
 769     </message>
 770     <message>
 771       <source>GEOM_RECTANGLE_TITLE</source>
 772       <translation>四角形の作成</translation>
 773     </message>
 774     <message>
 775       <source>GEOM_RECTANGLE</source>
 776       <translation>四角形の作成</translation>
 777     </message>
 778     <message>
 779       <source>GEOM_FILLET</source>
 780       <translation>Fillet</translation>
 781     </message>
 782     <message>
 783       <source>GEOM_FILLET_2D</source>
 784       <translation>Fillet_2D</translation>
 785     </message>
 786     <message>
 787       <source>GEOM_FILLET_1D</source>
 788       <translation>FIllet_1D</translation>
 789     </message>
 790     <message>
 791       <source>GEOM_FILLET_1D_IGNORE_SECANT</source>
 792       <translation>大きな光を許可するように共線性のエッジをマージします。</translation>
 793     </message>
 794     <message>
 795       <source>GEOM_FILLET_ABORT</source>
 796       <translation>半径%1 ではフィレットを構築できません。</translation>
 797     </message>
 798     <message>
 799       <source>GEOM_FILLET_ALL</source>
 800       <translation>上のオブジェクトを残す</translation>
 801     </message>
 802     <message>
 803       <source>GEOM_FILLET_EDGES</source>
 804       <translation>上のエッジを残す</translation>
 805     </message>
 806     <message>
 807       <source>GEOM_FILLET_FACES</source>
 808       <translation>選択した面にフィレット</translation>
 809     </message>
 810     <message>
 811       <source>GEOM_FILLET_TITLE</source>
 812       <translation>フィレットの作成</translation>
 813     </message>
 814     <message>
 815       <source>GEOM_FILLET_2D_TITLE</source>
 816       <translation>2Dフィレットの作成</translation>
 817     </message>
 818     <message>
 819       <source>GEOM_FILLET_1D_TITLE</source>
 820       <translation>1Dフィレットの作成</translation>
 821     </message>
 822     <message>
 823       <source>GEOM_FILLING</source>
 824       <translation>Filling</translation>
 825     </message>
 826     <message>
 827       <source>GEOM_FILLING_ARG</source>
 828       <translation>パラメーターと引数</translation>
 829     </message>
 830     <message>
 831       <source>GEOM_FILLING_COMPOUND</source>
 832       <translation>アセンブリ入力</translation>
 833     </message>
 834     <message>
 835       <source>GEOM_FILLING_MAX_DEG</source>
 836       <translation>最大角度</translation>
 837     </message>
 838     <message>
 839       <source>GEOM_FILLING_MIN_DEG</source>
 840       <translation>最小角度</translation>
 841     </message>
 842     <message>
 843       <source>GEOM_FILLING_NB_ITER</source>
 844       <translation>Nb. Iter :</translation>
 845     </message>
 846     <message>
 847       <source>GEOM_FILLING_TITLE</source>
 848       <translation>サーフェス エッジを埋める</translation>
 849     </message>
 850     <message>
 851       <source>GEOM_FILLING_TOL_2D</source>
 852       <translation>Tol. 2D :</translation>
 853     </message>
 854     <message>
 855       <source>GEOM_FILLING_TOL_3D</source>
 856       <translation>Tol. 3D :</translation>
 857     </message>
 858     <message>
 859       <source>GEOM_FREE_BOUNDARIES</source>
 860       <translation>自由境界</translation>
 861     </message>
 862     <message>
 863       <source>GEOM_FREE_BOUNDS_ERROR</source>
 864       <translation>オブジェクトが選択されていません</translation>
 865     </message>
 866     <message>
 867       <source>GEOM_FREE_BOUNDS_MSG</source>
 868       <translation>検出された自由境界: %1 (閉 %2、 開%3 )</translation>
 869     </message>
 870     <message>
 871       <source>GEOM_FREE_BOUNDS_TLT</source>
 872       <translation>無料の輪郭を見つける</translation>
 873     </message>
 874     <message>
 875       <source>GEOM_FREE_FACES</source>
 876       <translation>フリーフェース</translation>
 877     </message>
 878     <message>
 879       <source>GEOM_FREE_FACES_NAME</source>
 880       <translation>Free_face</translation>
 881     </message>
 882     <message>
 883       <source>GEOM_FREE_FACES_TITLE</source>
 884       <translation>フリーフェース</translation>
 885     </message>
 886     <message>
 887       <source>GEOM_FUSE</source>
 888       <translation>Fuse</translation>
 889     </message>
 890     <message>
 891       <source>GEOM_FUSE_TITLE</source>
 892       <translation>2つのオブジェクトの結合</translation>
 893     </message>
 894     <message>
 895       <source>GEOM_FixFaceSize</source>
 896       <translation>面のサイズを修正します</translation>
 897     </message>
 898     <message>
 899       <source>GEOM_FixShape</source>
 900       <translation>オブジェクトを修復します。</translation>
 901     </message>
 902     <message>
 903       <source>GEOM_GLUE</source>
 904       <translation>固着</translation>
 905     </message>
 906     <message>
 907       <source>GEOM_GLUE_FACES_TITLE</source>
 908       <translation>フェース固着</translation>
 909     </message>
 910     <message>
 911       <source>GEOM_GLUE_EDGES_TITLE</source>
 912       <translation>エッジ固着</translation>
 913     </message>
 914     <message>
 915       <source>GEOM_GLUE_EDGES_DETECT_TITLE</source>
 916       <translation>一致エッジ検出</translation>
 917     </message>
 918     <message>
 919       <source>GEOM_GLUE_FACES_DETECT_TITLE</source>
 920       <translation>一致面検出</translation>
 921     </message>
 922     <message>
 923       <source>GLUE_ERROR_STICKED_SHAPES</source>
 924       <translation>公差の値が大きすぎます。「付着」図形の検出。</translation>
 925     </message>
 926     <message>
 927       <source>GEOM_LIMIT_TOLERANCE_TITLE</source>
 928       <translation>公差の制限</translation>
 929     </message>
 930     <message>
 931       <source>GEOM_HEIGHT</source>
 932       <translation>高さ:</translation>
 933     </message>
 934     <message>
 935       <source>GEOM_HEXAGON</source>
 936       <translation>六角形</translation>
 937     </message>
 938     <message>
 939       <source>GEOM_HOLES</source>
 940       <translation>穴</translation>
 941     </message>
 942     <message>
 943       <source>GEOM_INIT_SHAPE</source>
 944       <translation>元のオブジェクト</translation>
 945     </message>
 946     <message>
 947       <source>GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE</source>
 948       <translation>同一の名前: をマウスで選択 ！</translation>
 949     </message>
 950     <message>
 951       <source>GEOM_IMPORT</source>
 952       <translation>形状をインポート</translation>
 953     </message>
 954     <message>
 955       <source>GEOM_INCORRECT_INPUT</source>
 956       <translation>入力のデータは有効ではありません ！</translation>
 957     </message>
 958     <message>
 959       <source>GEOM_INERTIA_CONSTR</source>
 960       <translation>行列とモーメント</translation>
 961     </message>
 962     <message>
 963       <source>GEOM_INERTIA_TITLE</source>
 964       <translation>慣性の計算</translation>
 965     </message>
 966     <message>
 967       <source>GEOM_INF_LOADED</source>
 968       <translation>ファイル %1 は開いています</translation>
 969     </message>
 970     <message>
 971       <source>GEOM_INTERNAL_WIRES</source>
 972       <translation>内部ワイヤー</translation>
 973     </message>
 974     <message>
 975       <source>GEOM_INTERPOL</source>
 976       <translation>補間</translation>
 977     </message>
 978     <message>
 979       <source>GEOM_KEEP_OBJECT</source>
 980       <translation>オブジェクトを維持します。</translation>
 981     </message>
 982     <message>
 983       <source>GEOM_LENGTH</source>
 984       <translation>長さ:</translation>
 985     </message>
 986     <message>
 987       <source>GEOM_LINE</source>
 988       <translation>Line</translation>
 989     </message>
 990     <message>
 991       <source>GEOM_LINE_TITLE</source>
 992       <translation>線の作成</translation>
 993     </message>
 994     <message>
 995       <source>GEOM_MAIN_OBJECT</source>
 996       <translation>メイン オブジェクト</translation>
 997     </message>
 998     <message>
 999       <source>GEOM_MARKER</source>
1000       <translation>マーカー</translation>
1001     </message>
1002     <message>
1003       <source>GEOM_MARKER_TITLE</source>
1004       <translation>座標系を作成</translation>
1005     </message>
1006     <message>
1007       <source>GEOM_MATERIAL_ID</source>
1008       <translation>素材: ID</translation>
1009     </message>
1010     <message>
1011       <source>GEOM_MATERIAL_MATERIAL</source>
1012       <translation>素材</translation>
1013     </message>
1014     <message>
1015       <source>GEOM_MATERIAL_SET</source>
1016       <translation>&amp;lt; ゲーム</translation>
1017     </message>
1018     <message>
1019       <source>GEOM_MATERIAL_SHAPE</source>
1020       <translation>形状</translation>
1021     </message>
1022     <message>
1023       <source>GEOM_MATERIAL_TITLE</source>
1024       <translation>支配的な核融合材料を定義します。</translation>
1025     </message>
1026     <message>
1027       <source>GEOM_MATRIX</source>
1028       <translation>マトリックス:</translation>
1029     </message>
1030     <message>
1031       <source>GEOM_MAX</source>
1032       <translation>最大:</translation>
1033     </message>
1034     <message>
1035       <source>GEOM_MAX_3D_TOLERANCE</source>
1036       <translation>最大 3 D 公差</translation>
1037     </message>
1038     <message>
1039       <source>GEOM_MAX_TOLERANCE</source>
1040       <translation>最長トレランス</translation>
1041     </message>
1042     <message>
1043       <source>GEOM_MEN_ALL_FILES</source>
1044       <translation>すべてのファイル (*)</translation>
1045     </message>
1046     <message>
1047       <source>GEOM_MEN_ANGLE</source>
1048       <translation>角度:</translation>
1049     </message>
1050     <message>
1051       <source>GEOM_MEN_COMPONENT</source>
1052       <translation>ジオメトリ</translation>
1053     </message>
1054     <message>
1055       <source>GEOM_MEN_ENTER_ANGLE</source>
1056       <translation>角度を度数で指定します</translation>
1057     </message>
1058     <message>
1059       <source>GEOM_MEN_ISOS</source>
1060       <translation>輪郭線の数を選択します。</translation>
1061     </message>
1062     <message>
1063       <source>GEOM_MEN_ISOU</source>
1064       <translation>Isos U :</translation>
1065     </message>
1066     <message>
1067       <source>GEOM_MEN_ISOV</source>
1068       <translation>Isos V :</translation>
1069     </message>
1070     <message>
1071       <source>GEOM_MEN_POPUP_NAME</source>
1072       <translation>%1 オブジェクト</translation>
1073     </message>
1074     <message>
1075       <source>GEOM_MEN_SHADING</source>
1076       <translation>網かけ</translation>
1077     </message>
1078     <message>
1079       <source>GEOM_MEN_SHADING_WITH_EDGES</source>
1080       <translation>エッジ＋シェーディング</translation>
1081     </message>
1082     <message>
1083       <source>GEOM_MEN_SKETCHER_X</source>
1084       <translation>X 軸方向の距離を指定</translation>
1085     </message>
1086     <message>
1087       <source>GEOM_MEN_SKETCHER_Y</source>
1088       <translation>Y 軸方向の距離を指定</translation>
1089     </message>
1090     <message>
1091       <source>GEOM_MEN_STEP_LABEL</source>
1092       <translation>ステップ：</translation>
1093     </message>
1094     <message>
1095       <source>GEOM_MEN_TRANSPARENCY</source>
1096       <translation>透明度</translation>
1097     </message>
1098     <message>
1099       <source>GEOM_MEN_TRANSPARENCY_LABEL</source>
1100       <translation>透明度:</translation>
1101     </message>
1102     <message>
1103       <source>GEOM_MEN_WIREFRAME</source>
1104       <translation>ワイヤ フレーム</translation>
1105     </message>
1106     <message>
1107       <source>GEOM_MEN_X</source>
1108       <translation>X :</translation>
1109     </message>
1110     <message>
1111       <source>GEOM_MEN_Y</source>
1112       <translation>Y :</translation>
1113     </message>
1114     <message>
1115       <source>GEOM_MESHING_DEFLECTION</source>
1116       <translation>メッシュの変形。:</translation>
1117     </message>
1118     <message>
1119       <source>GEOM_MIN</source>
1120       <translation>最小:</translation>
1121     </message>
1122     <message>
1123       <source>GEOM_MINDIST_NAME</source>
1124       <translation>DistMin</translation>
1125     </message>
1126     <message>
1127       <source>GEOM_MINDIST_NO_SOL</source>
1128       <translation>解決策を見つけた</translation>
1129     </message>
1130     <message>
1131       <source>GEOM_MINDIST_OBJ</source>
1132       <translation>オブジェクトと結果</translation>
1133     </message>
1134     <message>
1135       <source>GEOM_MINDIST_PUBLISH_TITLE</source>
1136       <translation>いくつかのソリューション</translation>
1137     </message>
1138     <message>
1139       <source>GEOM_MINDIST_PUBLISH_TEXT</source>
1140       <translation>研究で発見したすべてのソリューションを発行しますか。ない場合は、現在選択されている唯一のソリューションが公開されます。</translation>
1141     </message>
1142     <message>
1143       <source>GEOM_MINDIST_TITLE</source>
1144       <translation>2 つのオブジェクト間の最小距離</translation>
1145     </message>
1146     <message>
1147       <source>GEOM_MIRROR</source>
1148       <translation>Mirror</translation>
1149     </message>
1150     <message>
1151       <source>GEOM_MIRROR_TITLE</source>
1152       <translation>オブジェクトを反転</translation>
1153     </message>
1154     <message>
1155       <source>GEOM_MODE</source>
1156       <translation>モード</translation>
1157     </message>
1158     <message>
1159       <source>GEOM_MULTIROTATION</source>
1160       <translation>Multi-rotation</translation>
1161     </message>
1162     <message>
1163       <source>GEOM_MULTIROTATION_DOUBLE</source>
1164       <translation>多回転二重</translation>
1165     </message>
1166     <message>
1167       <source>GEOM_MULTIROTATION_SIMPLE</source>
1168       <translation>複数の単純な回転</translation>
1169     </message>
1170     <message>
1171       <source>GEOM_MULTIROTATION_TITLE</source>
1172       <translation>オブジェクトの複数回回転</translation>
1173     </message>
1174     <message>
1175       <source>GEOM_MULTITRANSLATION</source>
1176       <translation>Multi-translation</translation>
1177     </message>
1178     <message>
1179       <source>GEOM_MULTITRANSLATION_DOUBLE</source>
1180       <translation>ダブル マルチ翻訳</translation>
1181     </message>
1182     <message>
1183       <source>GEOM_MULTITRANSLATION_SIMPLE</source>
1184       <translation>マルチは簡単な翻訳</translation>
1185     </message>
1186     <message>
1187       <source>GEOM_MULTITRANSLATION_TITLE</source>
1188       <translation>複数オブジェクトの移動</translation>
1189     </message>
1190     <message>
1191       <source>GEOM_NAME_INCORRECT</source>
1192       <translation>オブジェクトの名前が見つかりませんでした。</translation>
1193     </message>
1194     <message>
1195       <source>GEOM_NB_BLOCKS_NO_OTHERS</source>
1196       <translation>指定された %1 ブロック (s) は (s) と他の固体のではないです。</translation>
1197     </message>
1198     <message>
1199       <source>GEOM_NB_BLOCKS_SOME_OTHERS</source>
1200       <translation>%1 ブロック (s) が指定された (s) と他の固体</translation>
1201     </message>
1202     <message>
1203       <source>GEOM_NB_TIMES</source>
1204       <translation>回数</translation>
1205     </message>
1206     <message>
1207       <source>GEOM_NB_TIMES_U</source>
1208       <translation>回数 U</translation>
1209     </message>
1210     <message>
1211       <source>GEOM_NB_TIMES_V</source>
1212       <translation>回数 V</translation>
1213     </message>
1214     <message>
1215       <source>GEOM_NODES</source>
1216       <translation>節点</translation>
1217     </message>
1218     <message>
1219       <source>GEOM_NUM_SPLIT_POINTS</source>
1220       <translation>分割点の数</translation>
1221     </message>
1222     <message>
1223       <source>GEOM_OBJECT</source>
1224       <translation>オブジェクト</translation>
1225     </message>
1226     <message>
1227       <source>GEOM_OBJECT_TYPE</source>
1228       <translation>オブジェクトの種類</translation>
1229     </message>
1230     <message>
1231       <source>GEOM_OBJECTS</source>
1232       <translation>オブジェクト</translation>
1233     </message>
1234     <message>
1235       <source>GEOM_OBJECT_I</source>
1236       <translation>オブジェクト %1</translation>
1237     </message>
1238     <message>
1239       <source>GEOM_OBJECT_RESULT</source>
1240       <translation>目的と結果</translation>
1241     </message>
1242     <message>
1243       <source>GEOM_OFFSET</source>
1244       <translation>Offset</translation>
1245     </message>
1246     <message>
1247       <source>GEOM_OFFSET_TITLE</source>
1248       <translation>サーフェスをオフセット</translation>
1249     </message>
1250     <message>
1251       <source>GEOM_PATTERN</source>
1252       <translation>加工図</translation>
1253     </message>
1254     <message>
1255       <source>GEOM_PROJECTION_ON_FACE</source>
1256       <translation>面上の投影</translation>
1257     </message>
1258     <message>
1259       <source>GEOM_PROJECTION_ON_WIRE</source>
1260       <translation>ワイヤ上の投影</translation>
1261     </message>
1262     <message>
1263       <source>GEOM_PROJECTION_ON_EDGE</source>
1264       <translation>エッジ上の投影</translation>
1265     </message>
1266     <message>
1267       <source>GEOM_PROJECTION_TITLE</source>
1268       <translation>フェース上に投影</translation>
1269     </message>
1270     <message>
1271       <source>GEOM_PROJECTION_NAME</source>
1272       <translation>Projection</translation>
1273     </message>
1274     <message>
1275       <source>GEOM_PROJ_ON_FACE_SOURCE</source>
1276       <translation>ソース頂点、エッジまたはワイヤ</translation>
1277     </message>
1278     <message>
1279       <source>GEOM_PROJ_ON_FACE_TARGET</source>
1280       <translation>ターゲット面</translation>
1281     </message>
1282     <message>
1283       <source>GEOM_PROJ_ON_WIRE_SOURCE</source>
1284       <translation>ソース頂点</translation>
1285     </message>
1286     <message>
1287       <source>GEOM_PROJ_ON_WIRE_TARGET</source>
1288       <translation>ターゲットワイヤ</translation>
1289     </message>
1290     <message>
1291       <source>GEOM_PROJ_ON_EDGE_SOURCE</source>
1292       <translation>ソース頂点</translation>
1293     </message>
1294     <message>
1295       <source>GEOM_PROJ_ON_EDGE_TARGET</source>
1296       <translation>ターゲットエッジ</translation>
1297     </message>
1298     <message>
1299       <source>GEOM_SOLUTION</source>
1300       <translation>解決方法:</translation>
1301     </message>
1302     <message>
1303       <source>GEOM_SOLUTION_I</source>
1304       <translation>%1 のソリューション</translation>
1305     </message>
1306     <message>
1307       <source>GEOM_WITH_CONTACT</source>
1308       <translation>接触している</translation>
1309     </message>
1310     <message>
1311       <source>GEOM_WITH_CORRECTION</source>
1312       <translation>補正している</translation>
1313     </message>
1314     <message>
1315       <source>GEOM_OPERATIONS</source>
1316       <translation>操作</translation>
1317     </message>
1318     <message>
1319       <source>GEOM_ORIENTATION</source>
1320       <translation>方向</translation>
1321     </message>
1322     <message>
1323       <source>GEOM_ORIENTATION_OPT</source>
1324       <translation>方向を反転して、法線ベクトルをシミュレート</translation>
1325     </message>
1326     <message>
1327       <source>GEOM_ORIENTATION_TITLE</source>
1328       <translation>向きを変更します。</translation>
1329     </message>
1330     <message>
1331       <source>GEOM_PARAMETER</source>
1332       <translation>パラメーター:</translation>
1333     </message>
1334     <message>
1335       <source>GEOM_PARAMETERS</source>
1336       <translation>パラメーター</translation>
1337     </message>
1338     <message>
1339       <source>GEOM_POINT_ON_EDGE</source>
1340       <translation>エッジ上のポイント</translation>
1341     </message>
1342     <message>
1343       <source>GEOM_POINT_ON_FACE</source>
1344       <translation>フェース上のポイント</translation>
1345     </message>
1346     <message>
1347       <source>GEOM_PARAM_VALUE</source>
1348       <translation>パラメーターで</translation>
1349     </message>
1350     <message>
1351       <source>GEOM_COORD_VALUE</source>
1352       <translation>座標</translation>
1353     </message>
1354     <message>
1355       <source>GEOM_LENGTH_VALUE</source>
1356       <translation>長さで</translation>
1357     </message>
1358     <message>
1359       <source>GEOM_TAKE_ORIENTATION_INTO_ACCOUNT</source>
1360       <translation>エッジの方向に注意</translation>
1361     </message>
1362     <message>
1363       <source>GEOM_PARTITION</source>
1364       <translation>Partition</translation>
1365     </message>
1366     <message>
1367       <source>GEOM_WRN_PARTITION_RESULT_EMPTY</source>
1368       <translation>パーティションの空、結果「結果の型」パラメーターをチェック</translation>
1369     </message>
1370     <message>
1371       <source>GEOM_PARTITION_HALFSPACE</source>
1372       <translation>半分でパーティション</translation>
1373     </message>
1374     <message>
1375       <source>GEOM_PARTITION_ORIENTATION</source>
1376       <translation>向きを変更します。</translation>
1377     </message>
1378     <message>
1379       <source>GEOM_PARTITION_TITLE</source>
1380       <translation>ツールオブジェクトで分割</translation>
1381     </message>
1382     <message>
1383       <source>GEOM_PATH_OBJECT</source>
1384       <translation>パス</translation>
1385     </message>
1386     <message>
1387       <source>GEOM_PIPE</source>
1388       <translation>Pipe</translation>
1389     </message>
1390     <message>
1391       <source>GEOM_PIPE_TITLE</source>
1392       <translation>パイプの作成</translation>
1393     </message>
1394     <message>
1395       <source>GEOM_PIPE_PATH</source>
1396       <translation>Path</translation>
1397     </message>
1398     <message>
1399       <source>GEOM_PIPE_PATH_TITLE</source>
1400       <translation>経路の復元</translation>
1401     </message>
1402     <message>
1403       <source>GEOM_PIPE_LIKE_SHAPE</source>
1404       <translation>シェルまたはソリッド タイプのパイプ</translation>
1405     </message>
1406     <message>
1407       <source>GEOM_PIPE_BASE1_OBJECT</source>
1408       <translation>始点となるベース　面/ワイヤ/エッジ</translation>
1409     </message>
1410     <message>
1411       <source>GEOM_PIPE_BASE2_OBJECT</source>
1412       <translation>終点となるベース　面/ワイヤ/エッジ</translation>
1413     </message>
1414     <message>
1415       <source>GEOM_PROFILE</source>
1416       <translation>プロファイル</translation>
1417     </message>
1418     <message>
1419       <source>GEOM_SEGMENT</source>
1420       <translation>直線のセグメント</translation>
1421     </message>
1422     <message>
1423       <source>GEOM_SELECT_UNPUBLISHED_EDGES</source>
1424       <translation>非公開のエッジを選択</translation>
1425     </message>
1426     <message>
1427       <source>GEOM_GENERATE_GROUPS</source>
1428       <translation>グループの作成</translation>
1429     </message>
1430     <message>
1431       <source>GEOM_GROUP_NAME_PREFIX</source>
1432       <translation>グループ名Prefix</translation>
1433     </message>
1434     <message>
1435       <source>GEOM_STEP_BY_STEP</source>
1436       <translation>ステップ生成</translation>
1437     </message>
1438     <message>
1439       <source>GEOM_PLANE</source>
1440       <translation>Plane</translation>
1441     </message>
1442     <message>
1443       <source>GEOM_PLANE_MIRROR</source>
1444       <translation>ミラー平面</translation>
1445     </message>
1446     <message>
1447       <source>GEOM_PLANE_PV</source>
1448       <translation>ポイントとベクトル</translation>
1449     </message>
1450     <message>
1451       <source>GEOM_PLANE_PVC</source>
1452       <translation>連絡先のベクトル ポイント</translation>
1453     </message>
1454     <message>
1455       <source>GEOM_PLANE_SIZE</source>
1456       <translation>平面のサイズ:</translation>
1457     </message>
1458     <message>
1459       <source>GEOM_PLANE_TITLE</source>
1460       <translation>平面の作成</translation>
1461     </message>
1462     <message>
1463       <source>GEOM_POINT</source>
1464       <translation>基準点</translation>
1465     </message>
1466     <message>
1467       <source>GEOM_POINT1</source>
1468       <translation>ポイント 1</translation>
1469     </message>
1470     <message>
1471       <source>GEOM_POINT2</source>
1472       <translation>ポイント 2</translation>
1473     </message>
1474     <message>
1475       <source>GEOM_POINT3</source>
1476       <translation>ポイント 3</translation>
1477     </message>
1478     <message>
1479       <source>GEOM_POINTS</source>
1480       <translation>ポイント</translation>
1481     </message>
1482     <message>
1483       <source>GEOM_POINT_I</source>
1484       <translation>点 %1</translation>
1485     </message>
1486     <message>
1487       <source>GEOM_POINT_MIRROR</source>
1488       <translation>ポイント ミラー</translation>
1489     </message>
1490     <message>
1491       <source>GEOM_POINT_TITLE</source>
1492       <translation>ポイントの作成</translation>
1493     </message>
1494     <message>
1495       <source>GEOM_START_POINT</source>
1496       <translation>始点</translation>
1497     </message>
1498     <message>
1499       <source>GEOM_POLYLINE</source>
1500       <translation>折れ線</translation>
1501     </message>
1502     <message>
1503       <source>GEOM_POSITION</source>
1504       <translation>Position</translation>
1505     </message>
1506     <message>
1507       <source>GEOM_POSITION_TITLE</source>
1508       <translation>オブジェクトの位置を変更</translation>
1509     </message>
1510     <message>
1511       <source>GEOM_PRECISION</source>
1512       <translation>精度:</translation>
1513     </message>
1514     <message>
1515       <source>GEOM_PROPAGATE</source>
1516       <translation>スプレッド</translation>
1517     </message>
1518     <message>
1519       <source>GEOM_PROPAGATE_TITLE</source>
1520       <translation>スプレッド</translation>
1521     </message>
1522     <message>
1523       <source>GEOM_PROPERTIES</source>
1524       <translation>基本プロパティ</translation>
1525     </message>
1526     <message>
1527       <source>GEOM_PROPERTIES_CONSTR</source>
1528       <translation>オブジェクトとそのプロパティ</translation>
1529     </message>
1530     <message>
1531       <source>GEOM_PROPERTIES_SURFACE</source>
1532       <translation>サーフェス:</translation>
1533     </message>
1534     <message>
1535       <source>GEOM_PROPERTIES_TITLE</source>
1536       <translation>基本プロパティ</translation>
1537     </message>
1538     <message>
1539       <source>GEOM_PROPERTIES_VOLUME</source>
1540       <translation>ボリューム:</translation>
1541     </message>
1542     <message>
1543       <source>GEOM_PRP_ABORT</source>
1544       <translation>操作は取り消されました</translation>
1545     </message>
1546     <message>
1547       <source>GEOM_PRP_COMMAND</source>
1548       <translation>この id = %1 に関連付けられているコマンドがない</translation>
1549     </message>
1550     <message>
1551       <source>GEOM_PRP_DONE</source>
1552       <translation>操作の結果</translation>
1553     </message>
1554     <message>
1555       <source>GEOM_PRP_EXPORT</source>
1556       <translation>ジオメトリを %1 にエクスポート...</translation>
1557     </message>
1558     <message>
1559       <source>GEOM_PRP_LOADING</source>
1560       <translation>読み込み %1...</translation>
1561     </message>
1562     <message>
1563       <source>GEOM_PRP_MIN_DIST</source>
1564       <translation>最小の距離を計算します。</translation>
1565     </message>
1566     <message>
1567       <source>GEOM_PRP_NOT_FOR_VTK_VIEWER</source>
1568       <translation>VTK ビューアーでは許可がありません</translation>
1569     </message>
1570     <message>
1571       <source>GEOM_PRP_NULLSHAPE</source>
1572       <translation>エラー！オブジェクトは存在しない、または不適切な形状です。</translation>
1573     </message>
1574     <message>
1575       <source>GEOM_PRP_READY</source>
1576       <translation>準備完了</translation>
1577     </message>
1578     <message>
1579       <source>GEOM_PRP_SELECT_EDGE</source>
1580       <translation>エッジを選択し、適用をクリック</translation>
1581     </message>
1582     <message>
1583       <source>GEOM_PRP_SELECT_FACE</source>
1584       <translation>抑制するフェースを選択し、Ok/Applyをクリック</translation>
1585     </message>
1586     <message>
1587       <source>GEOM_PRP_SELECT_FIRST</source>
1588       <translation>メインオブジェクトを最初に選択</translation>
1589     </message>
1590     <message>
1591       <source>GEOM_PRP_SELECT_SUBSHAPES</source>
1592       <translation>サブオブジェクトを選択します。</translation>
1593     </message>
1594     <message>
1595       <source>GEOM_PRP_SHAPE_IN_STUDY</source>
1596       <translation>最初にメインのオブジェクトを選択してください</translation>
1597     </message>
1598     <message>
1599       <source>GEOM_QUAD_FACE</source>
1600       <translation>Quadrangle_Face</translation>
1601     </message>
1602     <message>
1603       <source>GEOM_QUAD_FACE_TITLE</source>
1604       <translation>四角形の顔の構築</translation>
1605     </message>
1606     <message>
1607       <source>GEOM_RADIUS</source>
1608       <translation>半径:</translation>
1609     </message>
1610     <message>
1611       <source>GEOM_RADIUS_I</source>
1612       <translation>半径 %1:</translation>
1613     </message>
1614     <message>
1615       <source>GEOM_RADIUS_MAJOR</source>
1616       <translation>長径:</translation>
1617     </message>
1618     <message>
1619       <source>GEOM_RADIUS_MINOR</source>
1620       <translation>短径:</translation>
1621     </message>
1622     <message>
1623       <source>GEOM_RECONSTRUCTION_LIMIT</source>
1624       <translation>結果の型</translation>
1625     </message>
1626     <message>
1627       <source>GEOM_RECONSTRUCTION_LIMIT_EDGE</source>
1628       <translation>Edge</translation>
1629     </message>
1630     <message>
1631       <source>GEOM_RECONSTRUCTION_LIMIT_FACE</source>
1632       <translation>Face</translation>
1633     </message>
1634     <message>
1635       <source>GEOM_RECONSTRUCTION_LIMIT_SHAPE</source>
1636       <translation>オブジェクト</translation>
1637     </message>
1638     <message>
1639       <source>GEOM_RECONSTRUCTION_LIMIT_SHELL</source>
1640       <translation>シェル</translation>
1641     </message>
1642     <message>
1643       <source>GEOM_RECONSTRUCTION_LIMIT_SOLID</source>
1644       <translation>ソリッド</translation>
1645     </message>
1646     <message>
1647       <source>GEOM_RECONSTRUCTION_LIMIT_VERTEX</source>
1648       <translation>基準点</translation>
1649     </message>
1650     <message>
1651       <source>GEOM_RECONSTRUCTION_LIMIT_WIRE</source>
1652       <translation>ワイヤー</translation>
1653     </message>
1654     <message>
1655       <source>GEOM_REF_POINT</source>
1656       <translation>基準点</translation>
1657     </message>
1658     <message>
1659       <source>GEOM_REMOVE_ALL_HOLES</source>
1660       <translation>すべての穴を削除</translation>
1661     </message>
1662     <message>
1663       <source>GEOM_REMOVE_ALL_INT_WIRES</source>
1664       <translation>すべての内部ワイヤーを削除</translation>
1665     </message>
1666     <message>
1667       <source>GEOM_REMOVE_HOLES_TITLE</source>
1668       <translation>穴を削除</translation>
1669     </message>
1670     <message>
1671       <source>GEOM_REMOVE_INTERNAL_WIRES_TITLE</source>
1672       <translation>内部のワイヤーを削除</translation>
1673     </message>
1674     <message>
1675       <source>GEOM_REQUIRED_DEGREE</source>
1676       <translation>必要な自由度</translation>
1677     </message>
1678     <message>
1679       <source>GEOM_REQUIRED_NUM_SEGMENTS</source>
1680       <translation>必要なセグメントの数</translation>
1681     </message>
1682     <message>
1683       <source>GEOM_REVERSE</source>
1684       <translation>反転</translation>
1685     </message>
1686     <message>
1687       <source>GEOM_REVERSE_DIRECTION</source>
1688       <translation>方向を反転</translation>
1689     </message>
1690     <message>
1691       <source>GEOM_REVERSE_PLANE</source>
1692       <translation>平面の法線を反転</translation>
1693     </message>
1694     <message>
1695       <source>GEOM_REVERSE_U</source>
1696       <translation>Uを反転</translation>
1697     </message>
1698     <message>
1699       <source>GEOM_REVERSE_V</source>
1700       <translation>Vを反転</translation>
1701     </message>
1702     <message>
1703       <source>GEOM_REVERSE_VECTOR</source>
1704       <translation>ベクトルを反転</translation>
1705     </message>
1706     <message>
1707       <source>GEOM_REVOLUTION</source>
1708       <translation>Revolution</translation>
1709     </message>
1710     <message>
1711       <source>GEOM_REVOLUTION_TITLE</source>
1712       <translation>回転押し出しの作成</translation>
1713     </message>
1714     <message>
1715       <source>GEOM_ROTATION</source>
1716       <translation>Rotation</translation>
1717     </message>
1718     <message>
1719       <source>GEOM_ROTATION_TITLE</source>
1720       <translation>オブジェクトの回転</translation>
1721     </message>
1722     <message>
1723       <source>GEOM_SCALE</source>
1724       <translation>Scale</translation>
1725     </message>
1726     <message>
1727       <source>GEOM_SCALE_FACTOR</source>
1728       <translation>最終倍率</translation>
1729     </message>
1730     <message>
1731       <source>GEOM_SCALE_TITLE</source>
1732       <translation>オブジェクトのサイズを変更</translation>
1733     </message>
1734     <message>
1735       <source>GEOM_SECTION</source>
1736       <translation>Section</translation>
1737     </message>
1738     <message>
1739       <source>GEOM_SECTION_TITLE</source>
1740       <translation>2つのオブジェクトのセクション</translation>
1741     </message>
1742     <message>
1743       <source>GEOM_SELECTED_FACE</source>
1744       <translation>選択したフェース</translation>
1745     </message>
1746     <message>
1747       <source>GEOM_SELECTED_OBJECTS</source>
1748       <translation>選択したオブジェクト</translation>
1749     </message>
1750     <message>
1751       <source>GEOM_SELECTED_SHAPE</source>
1752       <translation>選択した形状</translation>
1753     </message>
1754     <message>
1755       <source>GEOM_SELECTED_SHAPES</source>
1756       <translation>選択済み形状</translation>
1757     </message>
1758     <message>
1759       <source>GEOM_SELECTION</source>
1760       <translation>選択</translation>
1761     </message>
1762     <message>
1763       <source>GEOM_SET_MATERIALS</source>
1764       <translation>材料を定義します。</translation>
1765     </message>
1766     <message>
1767       <source>GEOM_SEWING</source>
1768       <translation>Sewing</translation>
1769     </message>
1770     <message>
1771       <source>GEOM_SEWING_TITLE</source>
1772       <translation>トポロジーのつなぎ合わせ</translation>
1773     </message>
1774     <message>
1775       <source>GEOM_ALLOW_NON_MANIFOLD</source>
1776       <translation>非多様体を許可します。</translation>
1777     </message>
1778     <message>
1779       <source>GEOM_SHAPE</source>
1780       <translation>形状</translation>
1781     </message>
1782     <message>
1783       <source>GEOM_SHAPEPROCESS_TITLE</source>
1784       <translation>形状の処理</translation>
1785     </message>
1786     <message>
1787       <source>GEOM_SHAPES</source>
1788       <translation>形状</translation>
1789     </message>
1790     <message>
1791       <source>GEOM_SHELL</source>
1792       <translation>Shell</translation>
1793     </message>
1794     <message>
1795       <source>GEOM_SHELLS</source>
1796       <translation>Shells</translation>
1797     </message>
1798     <message>
1799       <source>GEOM_SHELL_TITLE</source>
1800       <translation>シェルの構築</translation>
1801     </message>
1802     <message>
1803       <source>GEOM_SHOW_LENGTH</source>
1804       <translation>長さの側を表示します。</translation>
1805     </message>
1806     <message>
1807       <source>GEOM_SHOW_ANGLE</source>
1808       <translation>角度の寸法を表示します。</translation>
1809     </message>
1810     <message>
1811       <source>GEOM_SHOW_POINTS_COORD</source>
1812       <translation>出発と到着のポイントを表示します。</translation>
1813     </message>
1814     <message>
1815       <source>GEOM_SKETCH</source>
1816       <translation>スケッチ</translation>
1817     </message>
1818     <message>
1819       <source>GEOM_SKETCHER_ABS</source>
1820       <translation>絶対値</translation>
1821     </message>
1822     <message>
1823       <source>GEOM_SKETCHER_ADD_PARAMS</source>
1824       <translation>追加パラメーター</translation>
1825     </message>
1826     <message>
1827       <source>GEOM_SKETCHER_ANGLE</source>
1828       <translation>角度</translation>
1829     </message>
1830     <message>
1831       <source>GEOM_SKETCHER_ANGLE2</source>
1832       <translation>角度:</translation>
1833     </message>
1834     <message>
1835       <source>GEOM_SKETCHER_APPLY</source>
1836       <translation>適用</translation>
1837     </message>
1838     <message>
1839       <source>GEOM_SKETCHER_ARC</source>
1840       <translation>Arc</translation>
1841     </message>
1842     <message>
1843       <source>GEOM_SKETCHER_CENTER</source>
1844       <translation>センター</translation>
1845     </message>
1846     <message>
1847       <source>GEOM_SKETCHER_CENTER2</source>
1848       <translation>センター:</translation>
1849     </message>
1850     <message>
1851       <source>GEOM_SKETCHER_WARNING</source>
1852       <translation>注意: リモートの終了点の弧:</translation>
1853     </message>
1854     <message>
1855       <source>GEOM_SKETCHER_CENTER_X</source>
1856       <translation>X センター。</translation>
1857     </message>
1858     <message>
1859       <source>GEOM_SKETCHER_CENTER_Y</source>
1860       <translation>センターは：</translation>
1861     </message>
1862     <message>
1863       <source>GEOM_SKETCHER_CENTER_DX</source>
1864       <translation>DX センター:</translation>
1865     </message>
1866     <message>
1867       <source>GEOM_SKETCHER_CENTER_DY</source>
1868       <translation>DY センター:</translation>
1869     </message>
1870     <message>
1871       <source>GEOM_SKETCHER_DEST</source>
1872       <translation>目的</translation>
1873     </message>
1874     <message>
1875       <source>GEOM_SKETCHER_DIR</source>
1876       <translation>方向</translation>
1877     </message>
1878     <message>
1879       <source>GEOM_SKETCHER_DX2</source>
1880       <translation>DX:</translation>
1881     </message>
1882     <message>
1883       <source>GEOM_SKETCHER_DY2</source>
1884       <translation>DY:</translation>
1885     </message>
1886     <message>
1887       <source>GEOM_SKETCHER_DZ2</source>
1888       <translation>DZ :</translation>
1889     </message>
1890     <message>
1891       <source>GEOM_SKETCHER_EL</source>
1892       <translation>要素の型</translation>
1893     </message>
1894     <message>
1895       <source>GEOM_SKETCHER_RESTORE</source>
1896       <translation>復元</translation>
1897     </message>
1898     <message>
1899       <source>GEOM_SKETCHER_LENGTH</source>
1900       <translation>長さ</translation>
1901     </message>
1902     <message>
1903       <source>GEOM_SKETCHER_LENGTH2</source>
1904       <translation>長さ:</translation>
1905     </message>
1906     <message>
1907       <source>GEOM_SKETCHER_NONE</source>
1908       <translation>なし (接線)</translation>
1909     </message>
1910     <message>
1911       <source>GEOM_SKETCHER_PER</source>
1912       <translation>垂直</translation>
1913     </message>
1914     <message>
1915       <source>GEOM_SKETCHER_POINT</source>
1916       <translation>基準点</translation>
1917     </message>
1918     <message>
1919       <source>GEOM_SKETCHER_POINT2</source>
1920       <translation>ポイント:</translation>
1921     </message>
1922     <message>
1923       <source>GEOM_SKETCHER_END_POINT2</source>
1924       <translation>終端のポイント:</translation>
1925     </message>
1926     <message>
1927       <source>GEOM_SKETCHER_RADIUS</source>
1928       <translation>半径</translation>
1929     </message>
1930     <message>
1931       <source>GEOM_SKETCHER_RADIUS2</source>
1932       <translation>半径:</translation>
1933     </message>
1934     <message>
1935       <source>GEOM_SKETCHER_REL</source>
1936       <translation>関係</translation>
1937     </message>
1938     <message>
1939       <source>GEOM_SKETCHER_SEGMENT</source>
1940       <translation>セグメント</translation>
1941     </message>
1942     <message>
1943       <source>GEOM_SKETCHER_SEL</source>
1944       <translation>選択</translation>
1945     </message>
1946     <message>
1947       <source>GEOM_SKETCHER_TAN</source>
1948       <translation>接線</translation>
1949     </message>
1950     <message>
1951       <source>GEOM_SKETCHER_TITLE</source>
1952       <translation>2D スケッチの構築</translation>
1953     </message>
1954     <message>
1955       <source>GEOM_3DSKETCHER_TITLE</source>
1956       <translation>3Dスケッチの構築</translation>
1957     </message>
1958     <message>
1959       <source>GEOM_SKETCHER_TYPE</source>
1960       <translation>タイプ</translation>
1961     </message>
1962     <message>
1963       <source>GEOM_SKETCHER_UNDO</source>
1964       <translation>アンドゥ</translation>
1965     </message>
1966     <message>
1967       <source>GEOM_SKETCHER_VALUES</source>
1968       <translation>値</translation>
1969     </message>
1970     <message>
1971       <source>GEOM_SKETCHER_VX2</source>
1972       <translation>VX:</translation>
1973     </message>
1974     <message>
1975       <source>GEOM_SKETCHER_VXVY</source>
1976       <translation>VX - VY</translation>
1977     </message>
1978     <message>
1979       <source>GEOM_SKETCHER_WPLANE</source>
1980       <translation>平面を選択します</translation>
1981     </message>
1982     <message>
1983       <source>GEOM_SKETCHER_VY2</source>
1984       <translation>VY:</translation>
1985     </message>
1986     <message>
1987       <source>GEOM_SKETCHER_X</source>
1988       <translation>X</translation>
1989     </message>
1990     <message>
1991       <source>GEOM_SKETCHER_X2</source>
1992       <translation>X :</translation>
1993     </message>
1994     <message>
1995       <source>GEOM_SKETCHER_X3</source>
1996       <translation>DX:</translation>
1997     </message>
1998     <message>
1999       <source>GEOM_SKETCHER_Y</source>
2000       <translation>そこ</translation>
2001     </message>
2002     <message>
2003       <source>GEOM_SKETCHER_Y2</source>
2004       <translation>Y :</translation>
2005     </message>
2006     <message>
2007       <source>GEOM_SKETCHER_Y3</source>
2008       <translation>DY:</translation>
2009     </message>
2010     <message>
2011       <source>GEOM_SKETCHER_Z2</source>
2012       <translation>Z:</translation>
2013     </message>
2014     <message>
2015       <source>GEOM_3DSKETCHER</source>
2016       <translation>3D_Sketcher</translation>
2017     </message>
2018     <message>
2019       <source>GEOM_COORDINATES_TYPE</source>
2020       <translation>お問い合わせの種類</translation>
2021     </message>
2022     <message>
2023       <source>GEOM_CONTROLS</source>
2024       <translation>コントロール要素</translation>
2025     </message>
2026     <message>
2027       <source>GEOM_SOLID</source>
2028       <translation>ソリッド</translation>
2029     </message>
2030     <message>
2031       <source>GEOM_SOLIDS</source>
2032       <translation>ソリッド</translation>
2033     </message>
2034     <message>
2035       <source>GEOM_SOLID_TITLE</source>
2036       <translation>ソリッドの構築</translation>
2037     </message>
2038     <message>
2039       <source>GEOM_SOLID_SHELLS</source>
2040       <translation>シェルからソリッドの作成</translation>
2041     </message>
2042     <message>
2043       <source>GEOM_SOLID_FACES</source>
2044       <translation>接続された面、シェルからソリッド作成</translation>
2045     </message>
2046     <message>
2047       <source>GEOM_SPHERE</source>
2048       <translation>Sphere</translation>
2049     </message>
2050     <message>
2051       <source>GEOM_SPHERE_CR</source>
2052       <translation>中央＋半径</translation>
2053     </message>
2054     <message>
2055       <source>GEOM_SPHERE_RO</source>
2056       <translation>原点中心で半径</translation>
2057     </message>
2058     <message>
2059       <source>GEOM_SPHERE_TITLE</source>
2060       <translation>球の作成</translation>
2061     </message>
2062     <message>
2063       <source>GEOM_SPLINE</source>
2064       <translation>スプライン</translation>
2065     </message>
2066     <message>
2067       <source>GEOM_SPLINE_TITLE</source>
2068       <translation>スプラインの構築</translation>
2069     </message>
2070     <message>
2071       <source>GEOM_SQUARE</source>
2072       <translation>四角</translation>
2073     </message>
2074     <message>
2075       <source>GEOM_START</source>
2076       <translation>出発日:</translation>
2077     </message>
2078     <message>
2079       <source>GEOM_END</source>
2080       <translation>到着:</translation>
2081     </message>
2082     <message>
2083       <source>GEOM_START_LCS</source>
2084       <translation>始まりの局所座標</translation>
2085     </message>
2086     <message>
2087       <source>SELECT_UNPUBLISHED_EDGES</source>
2088       <translation>非公開のエッジを選択</translation>
2089     </message>
2090     <message>
2091       <source>GEOM_STEP</source>
2092       <translation>ステップ：</translation>
2093     </message>
2094     <message>
2095       <source>GEOM_STEP_R</source>
2096       <translation>放射状のステップ:</translation>
2097     </message>
2098     <message>
2099       <source>GEOM_STEP_TITLE</source>
2100       <translation>GUI構築のステップ値</translation>
2101     </message>
2102     <message>
2103       <source>GEOM_STEP_U</source>
2104       <translation>間隔 U</translation>
2105     </message>
2106     <message>
2107       <source>GEOM_STEP_V</source>
2108       <translation>間隔 V</translation>
2109     </message>
2110     <message>
2111       <source>GEOM_STUDY_LOCKED</source>
2112       <translation>現在のスタディはロックされているので、変更することはできません</translation>
2113     </message>
2114     <message>
2115       <source>GEOM_SUBSHAPE_SELECT</source>
2116       <translation>サブオブジェクトを選択</translation>
2117     </message>
2118     <message>
2119       <source>GEOM_SUBSHAPE_TITLE</source>
2120       <translation>分解</translation>
2121     </message>
2122     <message>
2123       <source>GEOM_SUBSHAPE_TYPE</source>
2124       <translation>サブオブジェクトの型:</translation>
2125     </message>
2126     <message>
2127       <source>GEOM_SUB_SHAPE</source>
2128       <translation>サブオブジェクト</translation>
2129     </message>
2130     <message>
2131       <source>GEOM_SUPPRESSHOLE_FACE_SHELL</source>
2132       <translation>フェースやシェル</translation>
2133     </message>
2134     <message>
2135       <source>GEOM_SUPPRESSHOLE_SELECTFACE</source>
2136       <translation>穴のフェースを選択</translation>
2137     </message>
2138     <message>
2139       <source>GEOM_SUPPRESSHOLE_SELECTFACE_END</source>
2140       <translation>(穴を通す場合)フェース端を選択</translation>
2141     </message>
2142     <message>
2143       <source>GEOM_SUPPRESSHOLE_SELECTWIRE</source>
2144       <translation>フェースの輪郭を選択</translation>
2145     </message>
2146     <message>
2147       <source>GEOM_SUPPRESSHOLE_SELECTWIRE_END</source>
2148       <translation>(穴を通す場合)、輪郭端を選択</translation>
2149     </message>
2150     <message>
2151       <source>GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE</source>
2152       <translation>フェース上の穴を選択</translation>
2153     </message>
2154     <message>
2155       <source>GEOM_SUPPRESSHOLE_TITLE</source>
2156       <translation>穴を削除</translation>
2157     </message>
2158     <message>
2159       <source>GEOM_SUPPRESS_RESULT</source>
2160       <translation>結果を削除</translation>
2161     </message>
2162     <message>
2163       <source>GEOM_SUPPRESS_RESULT_INSIDE</source>
2164       <translation>内側</translation>
2165     </message>
2166     <message>
2167       <source>GEOM_SUPPRESS_RESULT_OUTSIDE</source>
2168       <translation>外側</translation>
2169     </message>
2170     <message>
2171       <source>GEOM_SUPRESSFACE</source>
2172       <translation>フェースを削除</translation>
2173     </message>
2174     <message>
2175       <source>GEOM_SUPRESSFACE_SELECT</source>
2176       <translation>削除するフェースを選択</translation>
2177     </message>
2178     <message>
2179       <source>GEOM_SUPRESSFACE_TITLE</source>
2180       <translation>オブジェクトのフェースを削除</translation>
2181     </message>
2182     <message>
2183       <source>GEOM_SURFACE_CONTINUTY</source>
2184       <translation>サーフェスの連続性</translation>
2185     </message>
2186     <message>
2187       <source>GEOM_SURFACE_MODE</source>
2188       <translation>表面モード</translation>
2189     </message>
2190     <message>
2191       <source>GEOM_SURFCONE</source>
2192       <translation>円錐形フェース</translation>
2193     </message>
2194     <message>
2195       <source>GEOM_SURFCYLINDER</source>
2196       <translation>円筒形フェース</translation>
2197     </message>
2198     <message>
2199       <source>GEOM_SURFSPHERE</source>
2200       <translation>球形フェース</translation>
2201     </message>
2202     <message>
2203       <source>GEOM_SURFTORUS</source>
2204       <translation>ドーナツ状フェース</translation>
2205     </message>
2206     <message>
2207       <source>GEOM_SameParameter</source>
2208       <translation>同じパラメーター</translation>
2209     </message>
2210     <message>
2211       <source>GEOM_SplitAngle</source>
2212       <translation>別の角度</translation>
2213     </message>
2214     <message>
2215       <source>GEOM_SplitClosedFaces</source>
2216       <translation>個別の閉じた面</translation>
2217     </message>
2218     <message>
2219       <source>GEOM_SplitContinuity</source>
2220       <translation>別の継続性</translation>
2221     </message>
2222     <message>
2223       <source>GEOM_THICKNESS</source>
2224       <translation>厚み</translation>
2225     </message>
2226     <message>
2227       <source>GEOM_TOLERANCE</source>
2228       <translation>公差</translation>
2229     </message>
2230     <message>
2231       <source>GEOM_LINEAR_TOLERANCE</source>
2232       <translation>リニア公差</translation>
2233     </message>
2234     <message>
2235       <source>GEOM_ANGULAR_TOLERANCE</source>
2236       <translation>角度公差</translation>
2237     </message>
2238     <message>
2239       <source>GEOM_TOLERANCE_CONSTR</source>
2240       <translation>オブジェクトとその公差</translation>
2241     </message>
2242     <message>
2243       <source>GEOM_TOLERANCE_EDGE</source>
2244       <translation>エッジ:</translation>
2245     </message>
2246     <message>
2247       <source>GEOM_TOLERANCE_FACE</source>
2248       <translation>フェース：</translation>
2249     </message>
2250     <message>
2251       <source>GEOM_TOLERANCE_TITLE</source>
2252       <translation>最大公差</translation>
2253     </message>
2254     <message>
2255       <source>GEOM_TOLERANCE_VERTEX</source>
2256       <translation>ポイント:</translation>
2257     </message>
2258     <message>
2259       <source>GEOM_TOOL_OBJECTS</source>
2260       <translation>ツールオブジェクト</translation>
2261     </message>
2262     <message>
2263       <source>GEOM_TORUS</source>
2264       <translation>Torus</translation>
2265     </message>
2266     <message>
2267       <source>GEOM_TORUS_TITLE</source>
2268       <translation>円環の作成</translation>
2269     </message>
2270     <message>
2271       <source>GEOM_TRANSLATION</source>
2272       <translation>translation</translation>
2273     </message>
2274     <message>
2275       <source>GEOM_TRANSLATION_COOR</source>
2276       <translation>座標変換</translation>
2277     </message>
2278     <message>
2279       <source>GEOM_TRANSLATION_TITLE</source>
2280       <translation>オブジェクトの移動</translation>
2281     </message>
2282     <message>
2283       <source>GEOM_TRANSPARENCY_OPAQUE</source>
2284       <translation>不透明</translation>
2285     </message>
2286     <message>
2287       <source>GEOM_TRANSPARENCY_TITLE</source>
2288       <translation>透明度</translation>
2289     </message>
2290     <message>
2291       <source>GEOM_TRANSPARENCY_TRANSPARENT</source>
2292       <translation>透明</translation>
2293     </message>
2294     <message>
2295       <source>GEOM_TRIHEDRON</source>
2296       <translation>三面体</translation>
2297     </message>
2298     <message>
2299       <source>GEOM_ToBezier</source>
2300       <translation>ベジェに</translation>
2301     </message>
2302     <message>
2303       <source>GEOM_VALUE</source>
2304       <translation>値</translation>
2305     </message>
2306     <message>
2307       <source>GEOM_VECTOR</source>
2308       <translation>Vector</translation>
2309     </message>
2310     <message>
2311       <source>GEOM_AXIS_DEFAULT</source>
2312       <translation>デフォルトでZ軸</translation>
2313     </message>
2314     <message>
2315       <source>GEOM_VECTOR_LENGTH</source>
2316       <translation>ベクトルの長さ:</translation>
2317     </message>
2318     <message>
2319       <source>GEOM_VECTOR_TITLE</source>
2320       <translation>ベクトルの作成</translation>
2321     </message>
2322     <message>
2323       <source>GEOM_VECTOR_U</source>
2324       <translation>ベクトル U</translation>
2325     </message>
2326     <message>
2327       <source>GEOM_VECTOR_V</source>
2328       <translation>ベクトル V</translation>
2329     </message>
2330     <message>
2331       <source>GEOM_VERTEX</source>
2332       <translation>Vertex</translation>
2333     </message>
2334     <message>
2335       <source>GEOM_VERTEXES</source>
2336       <translation>頂点</translation>
2337     </message>
2338     <message>
2339       <source>GEOM_WATER_DENSITY</source>
2340       <translation>水の密度:</translation>
2341     </message>
2342     <message>
2343       <source>GEOM_WEIGHT</source>
2344       <translation>重量:</translation>
2345     </message>
2346     <message>
2347       <source>GEOM_WIDTH</source>
2348       <translation>幅：</translation>
2349     </message>
2350     <message>
2351       <source>GEOM_WHATIS</source>
2352       <translation>選択対象の情報</translation>
2353     </message>
2354     <message>
2355       <source>GEOM_WHATIS_OBJECT</source>
2356       <translation>オブジェクトとそのトポロジー情報</translation>
2357     </message>
2358     <message>
2359       <source>GEOM_WHATIS_TITLE</source>
2360       <translation>選択対象の情報</translation>
2361     </message>
2362     <message>
2363       <source>GEOM_WIRE</source>
2364       <translation>Wire</translation>
2365     </message>
2366     <message>
2367       <source>GEOM_WIRES</source>
2368       <translation>Wires</translation>
2369     </message>
2370     <message>
2371       <source>GEOM_WIRES_TO_REMOVE</source>
2372       <translation>削除するワイヤー</translation>
2373     </message>
2374     <message>
2375       <source>GEOM_WIREZ</source>
2376       <translation>Wires</translation>
2377     </message>
2378     <message>
2379       <source>GEOM_WIRE_CONNECT</source>
2380       <translation>ワイヤー/エッジからワイヤーを作成</translation>
2381     </message>
2382     <message>
2383       <source>GEOM_WIRE_TITLE</source>
2384       <translation>ワイヤーを作成</translation>
2385     </message>
2386     <message>
2387       <source>GEOM_WPLANE</source>
2388       <translation>作業平面</translation>
2389     </message>
2390     <message>
2391       <source>GEOM_WPLANE_FACE</source>
2392       <translation>計画、平らな顔または SCL</translation>
2393     </message>
2394     <message>
2395       <source>GEOM_WPLANE_ORIGIN</source>
2396       <translation>平面を選択</translation>
2397     </message>
2398     <message>
2399       <source>GEOM_WPLANE_OXY</source>
2400       <translation>OXY</translation>
2401     </message>
2402     <message>
2403       <source>GEOM_WPLANE_OYZ</source>
2404       <translation>OYZ</translation>
2405     </message>
2406     <message>
2407       <source>GEOM_WPLANE_OZX</source>
2408       <translation>OZX</translation>
2409     </message>
2410     <message>
2411       <source>GEOM_WPLANE_TITLE</source>
2412       <translation>作業平面の選択</translation>
2413     </message>
2414     <message>
2415       <source>GEOM_WPLANE_VECTOR</source>
2416       <translation>2ベクトルを選択</translation>
2417     </message>
2418     <message>
2419       <source>GEOM_WPLANE_VX</source>
2420       <translation>ベクトル X</translation>
2421     </message>
2422     <message>
2423       <source>GEOM_WPLANE_VZ</source>
2424       <translation>ベクトル Z</translation>
2425     </message>
2426     <message>
2427       <source>GEOM_WRN_RADIUS_NULL</source>
2428       <translation>半径はゼロです</translation>
2429     </message>
2430     <message>
2431       <source>GEOM_WRN_WARNING</source>
2432       <translation>注意</translation>
2433     </message>
2434     <message>
2435       <source>GEOM_WRN_FACES_NOT_SHELL</source>
2436       <translation>シェルを作成できません。面の結合です。</translation>
2437     </message>
2438     <message>
2439       <source>GEOM_WRN_FACES_NOT_FACE</source>
2440       <translation>たった1つの面を作成することはできません。結果は複合面になります。</translation>
2441     </message>
2442     <message>
2443       <source>WRN_SHAPE_UNCLOSED</source>
2444       <translation>閉じていないオブジェクト %1 からソリッドを作成できません</translation>
2445     </message>
2446     <message>
2447       <source>WRN_SHAPE_NOT_SHELL</source>
2448       <translation>シェルではないためオブジェクト %1 からソリッドを作成できません</translation>
2449     </message>
2450     <message>
2451       <source>WRN_NULL_OBJECT_OR_SHAPE</source>
2452       <translation>ソリッド作成のオブジェクト %1 が無効</translation>
2453     </message>
2454     <message>
2455       <source>GROUP_DOWN</source>
2456       <translation>下</translation>
2457     </message>
2458     <message>
2459       <source>GROUP_UP</source>
2460       <translation>上</translation>
2461     </message>
2462     <message>
2463       <source>GROUP_SIDE1</source>
2464       <translation>横1</translation>
2465     </message>
2466     <message>
2467       <source>GROUP_SIDE2</source>
2468       <translation>横2</translation>
2469     </message>
2470     <message>
2471       <source>GROUP_OTHER</source>
2472       <translation>その他</translation>
2473     </message>
2474     <message>
2475       <source>GEOM_X</source>
2476       <translation>X :</translation>
2477     </message>
2478     <message>
2479       <source>GEOM_Y</source>
2480       <translation>Y :</translation>
2481     </message>
2482     <message>
2483       <source>GEOM_Z</source>
2484       <translation>Z:</translation>
2485     </message>
2486     <message>
2487       <source>GLUE_NEW_OBJ_NAME</source>
2488       <translation>Glue</translation>
2489     </message>
2490     <message>
2491       <source>LIMIT_TOLERANCE_NEW_OBJ_NAME</source>
2492       <translation>Limit_tolerance</translation>
2493     </message>
2494     <message>
2495       <source>MEN_CURVE_CREATOR</source>
2496       <translation>カーブの作成</translation>
2497     </message>
2498     <message>
2499       <source>TOP_CURVE_CREATOR</source>
2500       <translation>2Dポリラインの作成</translation>
2501     </message>
2502     <message>
2503       <source>STB_CURVE_CREATOR</source>
2504       <translation>2Dポリラインの作成</translation>
2505     </message>
2506     <message>
2507       <source>MEN_ALL_SEL_ONLY</source>
2508       <translation>全選択</translation>
2509     </message>
2510     <message>
2511       <source>MEN_ARC</source>
2512       <translation>円弧</translation>
2513     </message>
2514     <message>
2515       <source>MEN_ARCHIMEDE</source>
2516       <translation>アルキメデスの螺旋</translation>
2517     </message>
2518     <message>
2519       <source>MEN_BASIC</source>
2520       <translation>基本オブジェクト</translation>
2521     </message>
2522     <message>
2523       <source>MEN_BASIC_PROPS</source>
2524       <translation>基本プロパティ</translation>
2525     </message>
2526     <message>
2527       <source>MEN_BLOCKS</source>
2528       <translation>ブロック</translation>
2529     </message>
2530     <message>
2531       <source>MEN_BND_BOX</source>
2532       <translation>境界ボックス</translation>
2533     </message>
2534     <message>
2535       <source>MEN_BOOLEAN</source>
2536       <translation>ブーリアン</translation>
2537     </message>
2538     <message>
2539       <source>MEN_BOX</source>
2540       <translation>ボックス</translation>
2541     </message>
2542     <message>
2543       <source>MEN_BUILD</source>
2544       <translation>ビルド</translation>
2545     </message>
2546     <message>
2547       <source>MEN_FEATURE_DETECTION</source>
2548       <translation>形状認識</translation>
2549     </message>
2550     <message>
2551       <source>MEN_PICTURE_IMPORT</source>
2552       <translation>ビューアーにイメージをインポート</translation>
2553     </message>
2554     <message>
2555       <source>MEN_CHAMFER</source>
2556       <translation>面取り</translation>
2557     </message>
2558     <message>
2559       <source>MEN_CHANGE_ORIENTATION</source>
2560       <translation>向きの変更</translation>
2561     </message>
2562     <message>
2563       <source>MEN_CHECK</source>
2564       <translation>オブジェクトの確認</translation>
2565     </message>
2566     <message>
2567       <source>MEN_CHECK_COMPOUND</source>
2568       <translation>ブロックのアセンブリチェック</translation>
2569     </message>
2570     <message>
2571       <source>MEN_GET_NON_BLOCKS</source>
2572       <translation>固体非ブロックを取得します。</translation>
2573     </message>
2574     <message>
2575       <source>MEN_CHECK_SELF_INTERSECTIONS</source>
2576       <translation>自己交差の確認</translation>
2577     </message>
2578     <message>
2579       <source>MEN_FAST_CHECK_INTERSECTIONS</source>
2580       <translation>クイック交点</translation>
2581     </message>
2582     <message>
2583       <source>MEN_SHAPE_STATISTICS</source>
2584       <translation>形状の統計</translation>
2585     </message>
2586     <message>
2587       <source>MEN_CHECK_FREE_BNDS</source>
2588       <translation>自由境界の確認</translation>
2589     </message>
2590     <message>
2591       <source>MEN_CHECK_FREE_FACES</source>
2592       <translation>フリー面の確認</translation>
2593     </message>
2594     <message>
2595       <source>MEN_CHECK_GEOMETRY</source>
2596       <translation>ジオメトリチェック</translation>
2597     </message>
2598     <message>
2599       <source>MEN_CIRCLE</source>
2600       <translation>円</translation>
2601     </message>
2602     <message>
2603       <source>MEN_CLOSE_CONTOUR</source>
2604       <translation>輪郭を閉じる</translation>
2605     </message>
2606     <message>
2607       <source>MEN_COMMON</source>
2608       <translation>共有領域</translation>
2609     </message>
2610     <message>
2611       <source>MEN_COMPOUND</source>
2612       <translation>コンパウンド</translation>
2613     </message>
2614     <message>
2615       <source>MEN_COMPOUND_SEL_ONLY</source>
2616       <translation>コンパウンド</translation>
2617     </message>
2618     <message>
2619       <source>MEN_CONE</source>
2620       <translation>円錐</translation>
2621     </message>
2622     <message>
2623       <source>MEN_CURVE</source>
2624       <translation>曲線</translation>
2625     </message>
2626     <message>
2627       <source>MEN_CUT</source>
2628       <translation>カット(&amp;t)</translation>
2629     </message>
2630     <message>
2631       <source>MEN_CYLINDER</source>
2632       <translation>円筒</translation>
2633     </message>
2634     <message>
2635       <source>MEN_RECTANGLE</source>
2636       <translation>四角形</translation>
2637     </message>
2638     <message>
2639       <source>MEN_DELETE</source>
2640       <translation>削除</translation>
2641     </message>
2642     <message>
2643       <source>MEN_DIMENSIONS</source>
2644       <translation>寸法</translation>
2645     </message>
2646     <message>
2647       <source>MEN_DISPLAY</source>
2648       <translation>表示</translation>
2649     </message>
2650     <message>
2651       <source>MEN_DISK</source>
2652       <translation>円盤</translation>
2653     </message>
2654     <message>
2655       <source>MEN_DISPLAY_ALL</source>
2656       <translation>全表示</translation>
2657     </message>
2658     <message>
2659       <source>MEN_DISPLAY_MODE</source>
2660       <translation>表示モード</translation>
2661     </message>
2662     <message>
2663       <source>MEN_DISPLAY_ONLY</source>
2664       <translation>選択のみ表示</translation>
2665     </message>
2666     <message>
2667       <source>MEN_SHOW_ONLY_CHILDREN</source>
2668       <translation>子供だけを表示します。</translation>
2669     </message>
2670     <message>
2671       <source>MEN_BRING_TO_FRONT</source>
2672       <translation>手前に表示</translation>
2673     </message>
2674     <message>
2675       <source>TOP_BRING_TO_FRONT</source>
2676       <translation>手前に表示します。</translation>
2677     </message>
2678     <message>
2679       <source>STB_BRING_TO_FRONT</source>
2680       <translation>手前に表示します。</translation>
2681     </message>
2682     <message>
2683       <source>MEN_CLS_BRING_TO_FRONT</source>
2684       <translation>トップ レベルの状態をクリア</translation>
2685     </message>
2686     <message>
2687       <source>TOP_CLS_BRING_TO_FRONT</source>
2688       <translation>フォア グラウンドでオブジェクトを削除します。</translation>
2689     </message>
2690     <message>
2691       <source>STB_CLS_BRING_TO_FRONT</source>
2692       <translation>フォア グラウンドでオブジェクトを削除します。</translation>
2693     </message>
2694     <message>
2695       <source>MEN_EDGE</source>
2696       <translation>エッジ</translation>
2697     </message>
2698     <message>
2699       <source>MEN_EDGE_SEL_ONLY</source>
2700       <translation>エッジ</translation>
2701     </message>
2702     <message>
2703       <source>MEN_EDIT</source>
2704       <translation>編集(&amp;E)</translation>
2705     </message>
2706     <message>
2707       <source>MEN_ELLIPSE</source>
2708       <translation>楕円</translation>
2709     </message>
2710     <message>
2711       <source>MEN_ERASE</source>
2712       <translation>非表示</translation>
2713     </message>
2714     <message>
2715       <source>MEN_ERASE_ALL</source>
2716       <translation>すべてを非表示</translation>
2717     </message>
2718     <message>
2719       <source>MEN_EXPLODE</source>
2720       <translation>展開</translation>
2721     </message>
2722     <message>
2723       <source>MEN_EXPLODE_BLOCKS</source>
2724       <translation>ブロックで展開</translation>
2725     </message>
2726     <message>
2727       <source>MEN_EXPORT</source>
2728       <translation>エクスポート...</translation>
2729     </message>
2730     <message>
2731       <source>MEN_EXTRUSION</source>
2732       <translation>押出</translation>
2733     </message>
2734     <message>
2735       <source>MEN_EXTRUDED_CUT</source>
2736       <translation>押出しカット</translation>
2737     </message>
2738     <message>
2739       <source>MEN_EXTRUDED_BOSS</source>
2740       <translation>押出し</translation>
2741     </message>
2742     <message>
2743       <source>MEN_FACE</source>
2744       <translation>面</translation>
2745     </message>
2746     <message>
2747       <source>MEN_FACE_SEL_ONLY</source>
2748       <translation>面</translation>
2749     </message>
2750     <message>
2751       <source>MEN_FILE</source>
2752       <translation>ファイル(&amp;F)</translation>
2753     </message>
2754     <message>
2755       <source>MEN_FILLET</source>
2756       <translation>3Dフィレット</translation>
2757     </message>
2758     <message>
2759       <source>MEN_FILLET_1D</source>
2760       <translation>1D フィレット</translation>
2761     </message>
2762     <message>
2763       <source>MEN_FILLET_2D</source>
2764       <translation>2D フィレット</translation>
2765     </message>
2766     <message>
2767       <source>MEN_FILLING</source>
2768       <translation>埋込み</translation>
2769     </message>
2770     <message>
2771       <source>MEN_FUSE</source>
2772       <translation>結合</translation>
2773     </message>
2774     <message>
2775       <source>MEN_GENERATION</source>
2776       <translation>生成</translation>
2777     </message>
2778     <message>
2779       <source>MEN_GLUE_FACES</source>
2780       <translation>面の固着</translation>
2781     </message>
2782     <message>
2783       <source>MEN_GLUE_EDGES</source>
2784       <translation>エッジの固着</translation>
2785     </message>
2786     <message>
2787       <source>MEN_GROUP</source>
2788       <translation>グループ</translation>
2789     </message>
2790     <message>
2791       <source>MEN_GROUP_CREATE</source>
2792       <translation>グループを作成</translation>
2793     </message>
2794     <message>
2795       <source>MEN_GROUP_EDIT</source>
2796       <translation>グループの編集</translation>
2797     </message>
2798     <message>
2799       <source>MEN_GROUP_UNION</source>
2800       <translation>グループの結合</translation>
2801     </message>
2802     <message>
2803       <source>MEN_GROUP_INTERSECT</source>
2804       <translation>グループの交差</translation>
2805     </message>
2806     <message>
2807       <source>MEN_GROUP_CUT</source>
2808       <translation>グループのカット</translation>
2809     </message>
2810     <message>
2811       <source>MEN_FIELD</source>
2812       <translation>フィールド:</translation>
2813     </message>
2814     <message>
2815       <source>MEN_FIELD_CREATE</source>
2816       <translation>フィールドの作成</translation>
2817     </message>
2818     <message>
2819       <source>MEN_FIELD_EDIT</source>
2820       <translation>フィールドの編集</translation>
2821     </message>
2822     <message>
2823       <source>MEN_ADD_FIELD_STEP</source>
2824       <translation>フィールドステップの追加</translation>
2825     </message>
2826     <message>
2827       <source>MEN_RELOAD_IMPORTED</source>
2828       <translation>ディスクから再読み込み</translation>
2829     </message>
2830     <message>
2831       <source>MEN_HEX_SOLID</source>
2832       <translation>六面体ソリッド</translation>
2833     </message>
2834     <message>
2835       <source>MEN_IMPORT</source>
2836       <translation>インポート...</translation>
2837     </message>
2838     <message>
2839       <source>MEN_INERTIA</source>
2840       <translation>慣性</translation>
2841     </message>
2842     <message>
2843       <source>MEN_ISOS</source>
2844       <translation>Isos</translation>
2845     </message>
2846     <message>
2847       <source>MEN_LIMIT_TOLERANCE</source>
2848       <translation>許容範囲</translation>
2849     </message>
2850     <message>
2851       <source>MEN_LINE</source>
2852       <translation>線</translation>
2853     </message>
2854     <message>
2855       <source>MEN_LOCAL_CS</source>
2856       <translation>ローカル座標系</translation>
2857     </message>
2858     <message>
2859       <source>MEN_MASS_CENTER</source>
2860       <translation>重心</translation>
2861     </message>
2862     <message>
2863       <source>MEN_MEASURES</source>
2864       <translation>計測</translation>
2865     </message>
2866     <message>
2867       <source>MEN_MIN_DIST</source>
2868       <translation>最短距離</translation>
2869     </message>
2870     <message>
2871       <source>MEN_MIRROR</source>
2872       <translation>ミラー</translation>
2873     </message>
2874     <message>
2875       <source>MEN_MODIFY_LOCATION</source>
2876       <translation>位置変更</translation>
2877     </message>
2878     <message>
2879       <source>MEN_MUL_ROTATION</source>
2880       <translation>複数回回転</translation>
2881     </message>
2882     <message>
2883       <source>MEN_MUL_TRANSFORM</source>
2884       <translation>複数回移動</translation>
2885     </message>
2886     <message>
2887       <source>MEN_MUL_TRANSLATION</source>
2888       <translation>複数オブジェクトの移動</translation>
2889     </message>
2890     <message>
2891       <source>MEN_NEW_ENTITY</source>
2892       <translation>新しいエンティティ</translation>
2893     </message>
2894     <message>
2895       <source>MEN_OFFSET</source>
2896       <translation>サーフェスをオフセット</translation>
2897     </message>
2898     <message>
2899       <source>MEN_PROJECTION</source>
2900       <translation>投影</translation>
2901     </message>
2902     <message>
2903       <source>MEN_PROJ_ON_CYL</source>
2904       <translation>円筒の投影</translation>
2905     </message>
2906     <message>
2907       <source>MEN_OPERATIONS</source>
2908       <translation>操作</translation>
2909     </message>
2910     <message>
2911       <source>MEN_ORIGIN_AND_VECTORS</source>
2912       <translation>起源と基本ベクトル</translation>
2913     </message>
2914     <message>
2915       <source>MEN_PARTITION</source>
2916       <translation>パーティション</translation>
2917     </message>
2918     <message>
2919       <source>MEN_PIPE</source>
2920       <translation>経路に沿って押し出し</translation>
2921     </message>
2922     <message>
2923       <source>MEN_PIPE_PATH</source>
2924       <translation>経路の復元</translation>
2925     </message>
2926     <message>
2927       <source>MEN_THICKNESS</source>
2928       <translation>厚み</translation>
2929     </message>
2930     <message>
2931       <source>MEN_PLANE</source>
2932       <translation>平面</translation>
2933     </message>
2934     <message>
2935       <source>MEN_POINT</source>
2936       <translation>点</translation>
2937     </message>
2938     <message>
2939       <source>MEN_POINT_COORDS</source>
2940       <translation>点の座標</translation>
2941     </message>
2942     <message>
2943       <source>MEN_POINT_ON_EDGE</source>
2944       <translation>エッジに点を追加</translation>
2945     </message>
2946     <message>
2947       <source>MEN_POP_COLOR</source>
2948       <translation>色</translation>
2949     </message>
2950     <message>
2951       <source>MEN_POP_CREATE_GROUP</source>
2952       <translation>グループを作成</translation>
2953     </message>
2954     <message>
2955       <source>MEN_POP_EDIT_FIELD</source>
2956       <translation>フィールドの編集</translation>
2957     </message>
2958     <message>
2959       <source>MEN_POP_DISCLOSE_CHILDREN</source>
2960       <translation>子項目を開示</translation>
2961     </message>
2962     <message>
2963       <source>MEN_POP_CONCEAL_CHILDREN</source>
2964       <translation>子項目を隠す</translation>
2965     </message>
2966     <message>
2967       <source>MEN_POP_UNPUBLISH_OBJ</source>
2968       <translation>発行停止</translation>
2969     </message>
2970     <message>
2971       <source>MEN_POP_PUBLISH_OBJ</source>
2972       <translation>発行...</translation>
2973     </message>
2974     <message>
2975       <source>MEN_POP_ISOS</source>
2976       <translation>Isos</translation>
2977     </message>
2978     <message>
2979       <source>MEN_POP_DEFLECTION</source>
2980       <translation>変形倍率</translation>
2981     </message>
2982     <message>
2983       <source>MEN_POP_RENAME</source>
2984       <translation>名前変更</translation>
2985     </message>
2986     <message>
2987       <source>MEN_POP_SHADING</source>
2988       <translation>シェーディング</translation>
2989     </message>
2990     <message>
2991       <source>MEN_POP_SHADING_WITH_EDGES</source>
2992       <translation>エッジ＋シェーディング</translation>
2993     </message>
2994     <message>
2995       <source>MEN_POP_TEXTURE</source>
2996       <translation>テクスチャ</translation>
2997     </message>
2998     <message>
2999       <source>MEN_EDGE_WIDTH</source>
3000       <translation>エッジの幅</translation>
3001     </message>
3002     <message>
3003       <source>TOP_EDGE_WIDTH</source>
3004       <translation>エッジの幅</translation>
3005     </message>
3006     <message>
3007       <source>STB_EDGE_WIDTH</source>
3008       <translation>エッジの幅</translation>
3009     </message>
3010     <message>
3011       <source>MEN_ISOS_WIDTH</source>
3012       <translation>Iso イメージの幅</translation>
3013     </message>
3014     <message>
3015       <source>TOP_ISOS_WIDTH</source>
3016       <translation>Iso イメージの幅</translation>
3017     </message>
3018     <message>
3019       <source>STB_ISOS_WIDTH</source>
3020       <translation>Iso イメージの幅</translation>
3021     </message>
3022     <message>
3023       <source>MEN_LINE_WIDTH</source>
3024       <translation>線の幅</translation>
3025     </message>
3026     <message>
3027       <source>MEN_POP_SETTEXTURE</source>
3028       <translation>テクスチャ</translation>
3029     </message>
3030     <message>
3031       <source>MEN_POP_TRANSPARENCY</source>
3032       <translation>透明度</translation>
3033     </message>
3034     <message>
3035       <source>MEN_POP_WIREFRAME</source>
3036       <translation>ワイヤ フレーム</translation>
3037     </message>
3038     <message>
3039       <source>MEN_POP_VECTORS</source>
3040       <translation>ベクトル方向表示</translation>
3041     </message>
3042     <message>
3043       <source>MEN_POP_VERTICES</source>
3044       <translation>頂点の表示</translation>
3045     </message>
3046     <message>
3047       <source>MEN_POP_SHOW_NAME</source>
3048       <translation>名前の表示</translation>
3049     </message>
3050     <message>
3051       <source>MEN_PREFERENCES</source>
3052       <translation>設定</translation>
3053     </message>
3054     <message>
3055       <source>MEN_PREFERENCES_GEOM</source>
3056       <translation>ジオメトリ</translation>
3057     </message>
3058     <message>
3059       <source>MEN_PRIMITIVES</source>
3060       <translation>基本図形</translation>
3061     </message>
3062     <message>
3063       <source>MEN_ADVANCED</source>
3064       <translation>高度な処理</translation>
3065     </message>
3066     <message>
3067       <source>MEN_PROPAGATE</source>
3068       <translation>スプレッド</translation>
3069     </message>
3070     <message>
3071       <source>MEN_Q_FACE</source>
3072       <translation>四角形フェース</translation>
3073     </message>
3074     <message>
3075       <source>MEN_REPAIR</source>
3076       <translation>修復</translation>
3077     </message>
3078     <message>
3079       <source>MEN_REVOLUTION</source>
3080       <translation>回転押し出し</translation>
3081     </message>
3082     <message>
3083       <source>MEN_ROTATION</source>
3084       <translation>回転</translation>
3085     </message>
3086     <message>
3087       <source>MEN_SCALE</source>
3088       <translation>サイズを変更</translation>
3089     </message>
3090     <message>
3091       <source>MEN_SECTION</source>
3092       <translation>セクション</translation>
3093     </message>
3094     <message>
3095       <source>MEN_SELECT_ONLY</source>
3096       <translation>のみを選択</translation>
3097     </message>
3098     <message>
3099       <source>MEN_SEWING</source>
3100       <translation>縫合</translation>
3101     </message>
3102     <message>
3103       <source>MEN_SHADING</source>
3104       <translation>網かけ</translation>
3105     </message>
3106     <message>
3107       <source>MEN_SHADING_WITH_EDGES</source>
3108       <translation>陰影とエッジ</translation>
3109     </message>
3110     <message>
3111       <source>MEN_SHADING_COLOR</source>
3112       <translation>網かけの色</translation>
3113     </message>
3114     <message>
3115       <source>MEN_SHAPE_PROCESS</source>
3116       <translation>形状処理</translation>
3117     </message>
3118     <message>
3119       <source>MEN_SHELL</source>
3120       <translation>シェル</translation>
3121     </message>
3122     <message>
3123       <source>MEN_SHELL_SEL_ONLY</source>
3124       <translation>シェル</translation>
3125     </message>
3126     <message>
3127       <source>MEN_SKETCH</source>
3128       <translation>2D スケッチ</translation>
3129     </message>
3130     <message>
3131       <source>MEN_3DSKETCH</source>
3132       <translation>３D スケッチ</translation>
3133     </message>
3134     <message>
3135       <source>MEN_ISOLINE</source>
3136       <translation>等高線</translation>
3137     </message>
3138     <message>
3139       <source>MEN_SURFACE_FROM_FACE</source>
3140       <translation>面から表面</translation>
3141     </message>
3142     <message>
3143       <source>MEN_SOLID</source>
3144       <translation>ソリッド</translation>
3145     </message>
3146     <message>
3147       <source>MEN_SOLID_FROM_FACES</source>
3148       <translation>接続された面からソリッド</translation>
3149     </message>
3150     <message>
3151       <source>MEN_SOLID_SEL_ONLY</source>
3152       <translation>ソリッド</translation>
3153     </message>
3154     <message>
3155       <source>MEN_SPHERE</source>
3156       <translation>球</translation>
3157     </message>
3158     <message>
3159       <source>MEN_STEP_VALUE</source>
3160       <translation>ステップの値</translation>
3161     </message>
3162     <message>
3163       <source>MEN_SUPPERSS_HOLES</source>
3164       <translation>穴を削除</translation>
3165     </message>
3166     <message>
3167       <source>MEN_SUPPRESS_FACES</source>
3168       <translation>フェースを削除</translation>
3169     </message>
3170     <message>
3171       <source>MEN_SUPPRESS_INT_WIRES</source>
3172       <translation>内部の輪郭を削除します。</translation>
3173     </message>
3174     <message>
3175       <source>MEN_TOLERANCE</source>
3176       <translation>公差</translation>
3177     </message>
3178     <message>
3179       <source>MEN_TOOLS</source>
3180       <translation>ツール(&amp;T)</translation>
3181     </message>
3182     <message>
3183       <source>MEN_MATERIALS_LIBRARY</source>
3184       <translation>材料ライブラリ</translation>
3185     </message>
3186     <message>
3187       <source>MEN_TEXTURE</source>
3188       <translation>テクスチャ</translation>
3189     </message>
3190     <message>
3191       <source>MEN_TORUS</source>
3192       <translation>円環</translation>
3193     </message>
3194     <message>
3195       <source>MEN_TRANSFORMATION</source>
3196       <translation>変形</translation>
3197     </message>
3198     <message>
3199       <source>MEN_TRANSLATION</source>
3200       <translation>変換</translation>
3201     </message>
3202     <message>
3203       <source>MEN_VECTOR</source>
3204       <translation>ベクトル</translation>
3205     </message>
3206     <message>
3207       <source>MEN_VERTEX_SEL_ONLY</source>
3208       <translation>基準点</translation>
3209     </message>
3210     <message>
3211       <source>MEN_VIEW</source>
3212       <translation>表示(&amp;V)</translation>
3213     </message>
3214     <message>
3215       <source>MEN_WHAT_IS</source>
3216       <translation>選択対象の情報</translation>
3217     </message>
3218     <message>
3219       <source>MEN_WIRE</source>
3220       <translation>ワイヤー</translation>
3221     </message>
3222     <message>
3223       <source>MEN_VECTOR_MODE_ON</source>
3224       <translation>エッジの方向を表示</translation>
3225     </message>
3226     <message>
3227       <source>MEN_VECTOR_MODE_OFF</source>
3228       <translation>エッジの方向を非表示</translation>
3229     </message>
3230     <message>
3231       <source>MEN_VERTICES_MODE_ON</source>
3232       <translation>頂点の表示</translation>
3233     </message>
3234     <message>
3235       <source>MEN_VERTICES_MODE_OFF</source>
3236       <translation>頂点の非表示</translation>
3237     </message>
3238     <message>
3239       <source>MEN_NAME_MODE_ON</source>
3240       <translation>名前の表示</translation>
3241     </message>
3242     <message>
3243       <source>MEN_NAME_MODE_OFF</source>
3244       <translation>名前の非表示</translation>
3245     </message>
3246     <message>
3247       <source>MEN_WIREFRAME</source>
3248       <translation>ワイヤ フレーム</translation>
3249     </message>
3250     <message>
3251       <source>MEN_WIRE_SEL_ONLY</source>
3252       <translation>ワイヤー</translation>
3253     </message>
3254     <message>
3255       <source>MEN_WORK_PLANE</source>
3256       <translation>作業平面</translation>
3257     </message>
3258     <message>
3259       <source>MEN_POP_POINT_MARKER</source>
3260       <translation>ポイント マーカ</translation>
3261     </message>
3262     <message>
3263       <source>MEN_POP_MATERIAL_PROPERTIES</source>
3264       <translation>材料特性</translation>
3265     </message>
3266     <message>
3267       <source>MEN_POP_PREDEF_MATER_CUSTOM</source>
3268       <translation>カスタム...</translation>
3269     </message>
3270     <message>
3271       <source>MEN_EDGE_EXTEND</source>
3272       <translation>拡張エッジ</translation>
3273     </message>
3274     <message>
3275       <source>MEN_FACE_EXTEND</source>
3276       <translation>拡張面</translation>
3277     </message>
3278     <message>
3279       <source>NAME_LBL</source>
3280       <translation>名前:</translation>
3281     </message>
3282     <message>
3283       <source>NON_GEOM_OBJECTS_SELECTED</source>
3284       <translation>%1 コンポーネントに属していない選択オブジェクトがあります</translation>
3285     </message>
3286     <message>
3287       <source>PREF_DEFLECTION</source>
3288       <translation>変形倍率</translation>
3289     </message>
3290     <message>
3291       <source>GEOM_PREF_def_precision</source>
3292       <translation>既定の精度</translation>
3293     </message>
3294     <message>
3295       <source>GEOM_PREF_length_precision</source>
3296       <translation>長さの精度</translation>
3297     </message>
3298     <message>
3299       <source>GEOM_PREF_angle_precision</source>
3300       <translation>角度精度</translation>
3301     </message>
3302     <message>
3303       <source>GEOM_PREF_len_tol_precision</source>
3304       <translation>長さ許容差の精度</translation>
3305     </message>
3306     <message>
3307       <source>GEOM_PREF_ang_tol_precision</source>
3308       <translation>角度公差の精度</translation>
3309     </message>
3310     <message>
3311       <source>GEOM_PREF_weight_precision</source>
3312       <translation>重量精度</translation>
3313     </message>
3314     <message>
3315       <source>GEOM_PREF_density_precision</source>
3316       <translation>密度の精度</translation>
3317     </message>
3318     <message>
3319       <source>GEOM_PREF_parametric_precision</source>
3320       <translation>パラメトリック精度</translation>
3321     </message>
3322     <message>
3323       <source>GEOM_PREF_param_tol_precision</source>
3324       <translation>パラメトリック許容精度</translation>
3325     </message>
3326     <message>
3327       <source>PREF_AUTO_CREATE</source>
3328       <translation>自動作成</translation>
3329     </message>
3330     <message>
3331       <source>PREF_DISPLAY_MODE</source>
3332       <translation>表示モード</translation>
3333     </message>
3334     <message>
3335       <source>PREF_TRANSPARENCY</source>
3336       <translation>透明度</translation>
3337     </message>
3338     <message>
3339       <source>PREF_FREE_BOUND_COLOR</source>
3340       <translation>自由境界の色</translation>
3341     </message>
3342     <message>
3343       <source>PREF_GROUP_ORIGIN_AND_BASE_VECTORS</source>
3344       <translation>原点とベースベクトル</translation>
3345     </message>
3346     <message>
3347       <source>PREF_GROUP_OPERATIONS</source>
3348       <translation>操作</translation>
3349     </message>
3350     <message>
3351       <source>PREF_GROUP_GENERAL</source>
3352       <translation>一般的な</translation>
3353     </message>
3354     <message>
3355       <source>GEOM_PREF_GROUP_PRECISION</source>
3356       <translation>フィールド精度の入力</translation>
3357     </message>
3358     <message>
3359       <source>PREF_GROUP_VERTEX</source>
3360       <translation>ポイントのマーカー</translation>
3361     </message>
3362     <message>
3363       <source>PREF_ISOS_COLOR</source>
3364       <translation>輪郭の色</translation>
3365     </message>
3366     <message>
3367       <source>PREF_LABEL_COLOR</source>
3368       <translation>ラベルの色</translation>
3369     </message>
3370     <message>
3371       <source>PREF_TOPLEVEL_COLOR</source>
3372       <translation>前景オブジェクトの色</translation>
3373     </message>
3374     <message>
3375       <source>PREF_TOPLEVEL_DM</source>
3376       <translation>フォア グラウンド モードでのオブジェクトを表示します。</translation>
3377     </message>
3378     <message>
3379       <source>MEN_KEEP_CURRENT_DM</source>
3380       <translation>現在の表示モードを維持します。</translation>
3381     </message>
3382     <message>
3383       <source>MEN_SHOW_ADD_WACTOR</source>
3384       <translation>さらに、輪郭を表示します。</translation>
3385     </message>
3386     <message>
3387       <source>PREF_LINE_COLOR</source>
3388       <translation>エッジ、ベクトル、輪郭の色</translation>
3389     </message>
3390     <message>
3391       <source>PREF_MARKER_SCALE</source>
3392       <translation>サイズ</translation>
3393     </message>
3394     <message>
3395       <source>PREF_POINT_COLOR</source>
3396       <translation>点の色</translation>
3397     </message>
3398     <message>
3399       <source>PREF_SHADING_COLOR</source>
3400       <translation>網かけの色</translation>
3401     </message>
3402     <message>
3403       <source>PREF_EDGES_IN_SHADING</source>
3404       <translation>シェーディングのエッジ</translation>
3405     </message>
3406     <message>
3407       <source>PREF_STEP_VALUE</source>
3408       <translation>スピンボックスのステップ値</translation>
3409     </message>
3410     <message>
3411       <source>PREF_TAB_SETTINGS</source>
3412       <translation>設定</translation>
3413     </message>
3414     <message>
3415       <source>PREF_TYPE_OF_MARKER</source>
3416       <translation>タイプ</translation>
3417     </message>
3418     <message>
3419       <source>PREF_BASE_VECTORS_LENGTH</source>
3420       <translation>基準ベクトルの長さ</translation>
3421     </message>
3422     <message>
3423       <source>PREF_WIREFRAME_COLOR</source>
3424       <translation>エッジの色</translation>
3425     </message>
3426     <message>
3427       <source>PREF_MATERIAL</source>
3428       <translation>素材</translation>
3429     </message>
3430     <message>
3431       <source>PREF_PREDEF_MATERIALS</source>
3432       <translation>コンテキスト メニューからプリセット マテリアルを表示します。</translation>
3433     </message>
3434     <message>
3435       <source>PREF_EDITGROUP_COLOR</source>
3436       <translation>グループの編集中にスロット形状の色</translation>
3437     </message>
3438     <message>
3439       <source>PREF_EDGE_WIDTH</source>
3440       <translation>エッジの厚さ</translation>
3441     </message>
3442     <message>
3443       <source>PREF_ISOLINES_WIDTH</source>
3444       <translation>輪郭の太さ</translation>
3445     </message>
3446     <message>
3447       <source>PREF_PREVIEW_EDGE_WIDTH</source>
3448       <translation>プレビューの厚み</translation>
3449     </message>
3450     <message>
3451       <source>PREF_MEASURES_LINE_WIDTH</source>
3452       <translation>厚さ測定の機能</translation>
3453     </message>
3454     <message>
3455       <source>PREF_AUTO_BRING_TO_FRONT</source>
3456       <translation>フォア グラウンドで自動的に表示されます。</translation>
3457     </message>
3458     <message>
3459       <source>PREF_DIMENSIONS</source>
3460       <translation>ディメンジョン (測定)</translation>
3461     </message>
3462     <message>
3463       <source>PREF_DIMENSIONS_COLOR</source>
3464       <translation>色</translation>
3465     </message>
3466     <message>
3467       <source>PREF_DIMENSIONS_LINE_WIDTH</source>
3468       <translation>線幅</translation>
3469     </message>
3470     <message>
3471       <source>PREF_DIMENSIONS_FONT</source>
3472       <translation>フォント</translation>
3473     </message>
3474     <message>
3475       <source>PREF_DIMENSIONS_ARROW_LENGTH</source>
3476       <translation>矢印の長さ</translation>
3477     </message>
3478     <message>
3479       <source>PREF_DIMENSIONS_LENGTH_UNITS</source>
3480       <translation>測定単位</translation>
3481     </message>
3482     <message>
3483       <source>PREF_DIMENSIONS_ANGLE_UNITS</source>
3484       <translation>角度測定単位</translation>
3485     </message>
3486     <message>
3487       <source>PREF_DIMENSIONS_DEFAULT_FLYOUT</source>
3488       <translation>既定の距離</translation>
3489     </message>
3490     <message>
3491       <source>PREF_DIMENSIONS_SHOW_UNITS</source>
3492       <translation>測定単位の表示</translation>
3493     </message>
3494     <message>
3495       <source>PREF_DIMENSIONS_USE_TEXT3D</source>
3496       <translation>3Dテキストの使用</translation>
3497     </message>
3498     <message>
3499       <source>PREF_SHAPE_ANNOTATIONS</source>
3500       <translation type="unfinished">Shape annotations</translation>
3501     </message>
3502     <message>
3503       <source>PREF_SHAPE_ANNOTATIONS_FONT</source>
3504       <translation type="unfinished">Font</translation>
3505     </message>
3506     <message>
3507       <source>PREF_SHAPE_ANNOTATIONS_FONT_COLOR</source>
3508       <translation type="unfinished">Font color</translation>
3509     </message>
3510     <message>
3511       <source>PREF_SHAPE_ANNOTATIONS_LINE_COLOR</source>
3512       <translation type="unfinished">Line color</translation>
3513     </message>
3514     <message>
3515       <source>PREF_SHAPE_ANNOTATIONS_LINE_WIDTH</source>
3516       <translation type="unfinished">Line width</translation>
3517     </message>
3518     <message>
3519       <source>PREF_SHAPE_ANNOTATIONS_LINE_STYLE</source>
3520       <translation type="unfinished">Line style</translation>
3521     </message>
3522     <message>
3523       <source>PREF_SHAPE_ANNOTATIONS_AUTOHIDE</source>
3524       <translation type="unfinished">Hide when attachment is invisible</translation>
3525     </message>
3526     <message>
3527       <source>PREF_SHAPE_ANNOTATIONS_LINESTYLE_SOLID</source>
3528       <translation type="unfinished">Solid</translation>
3529     </message>
3530     <message>
3531       <source>PREF_SHAPE_ANNOTATIONS_LINESTYLE_DASH</source>
3532       <translation type="unfinished">Dashed</translation>
3533     </message>
3534     <message>
3535       <source>PREF_SHAPE_ANNOTATIONS_LINESTYLE_DOT</source>
3536       <translation type="unfinished">Dotted</translation>
3537     </message>
3538     <message>
3539       <source>PREF_SHAPE_ANNOTATIONS_LINESTYLE_DOTDASH</source>
3540       <translation type="unfinished">Mixed</translation>
3541     </message>
3542     <message>
3543       <source>PREF_HIDE_INPUT_OBJECT</source>
3544       <translation>ビューワから入力したオブジェクトの非表示</translation>
3545     </message>
3546     <message>
3547       <source>PREF_ISOS</source>
3548       <translation>輪郭の数</translation>
3549     </message>
3550     <message>
3551       <source>PREF_ISOS_U</source>
3552       <translation>U によると</translation>
3553     </message>
3554     <message>
3555       <source>PREF_ISOS_V</source>
3556       <translation>よると V</translation>
3557     </message>
3558     <message>
3559       <source>PREF_GROUP_SCALAR_BAR</source>
3560       <translation>場の分布表示についてのスカラバー</translation>
3561     </message>
3562     <message>
3563       <source>PREF_SCALAR_BAR_X_POSITION</source>
3564       <translation>X座標</translation>
3565     </message>
3566     <message>
3567       <source>PREF_SCALAR_BAR_Y_POSITION</source>
3568       <translation>Y座標</translation>
3569     </message>
3570     <message>
3571       <source>PREF_SCALAR_BAR_WIDTH</source>
3572       <translation>幅</translation>
3573     </message>
3574     <message>
3575       <source>PREF_SCALAR_BAR_HEIGHT</source>
3576       <translation>高さ</translation>
3577     </message>
3578     <message>
3579       <source>PREF_SCALAR_BAR_TEXT_HEIGHT</source>
3580       <translation>文字高さ</translation>
3581     </message>
3582     <message>
3583       <source>PREF_SCALAR_BAR_NUMBER_OF_INTERVALS</source>
3584       <translation>間隔の数</translation>
3585     </message>
3586     <message>
3587       <source>PROCESS_SHAPE_NEW_OBJ_NAME</source>
3588       <translation>ProcessShape</translation>
3589     </message>
3590     <message>
3591       <source>MATERIAL_LIBRARY_TLT</source>
3592       <translation>材料ライブラリ</translation>
3593     </message>
3594     <message>
3595       <source>REMOVE_HOLES_NEW_OBJ_NAME</source>
3596       <translation>SupressHoles</translation>
3597     </message>
3598     <message>
3599       <source>REMOVE_INT_WIRES_NEW_OBJ_NAME</source>
3600       <translation>RemoveIntWires</translation>
3601     </message>
3602     <message>
3603       <source>SEWING_NEW_OBJ_NAME</source>
3604       <translation>Sewing</translation>
3605     </message>
3606     <message>
3607       <source>STB_ALL_SEL_ONLY</source>
3608       <translation>すべてのオブジェクトを選択</translation>
3609     </message>
3610     <message>
3611       <source>STB_ARC</source>
3612       <translation>円弧を作成</translation>
3613     </message>
3614     <message>
3615       <source>STB_ARCHIMEDE</source>
3616       <translation>アルキメデス法で水位面を作成します。</translation>
3617     </message>
3618     <message>
3619       <source>STB_BASIC_PROPS</source>
3620       <translation>オブジェクトの基本プロパティを表示</translation>
3621     </message>
3622     <message>
3623       <source>STB_BND_BOX</source>
3624       <translation>オブジェクトの境界ボックスを計算</translation>
3625     </message>
3626     <message>
3627       <source>STB_BOX</source>
3628       <translation>ボックスを作成</translation>
3629     </message>
3630     <message>
3631       <source>STB_FEATURE_DETECTION</source>
3632       <translation>パターン認識</translation>
3633     </message>
3634     <message>
3635       <source>STB_PICTURE_IMPORT</source>
3636       <translation>ビューアーにイメージをインポートします。</translation>
3637     </message>
3638     <message>
3639       <source>STB_CHAMFER</source>
3640       <translation>面取りを作成</translation>
3641     </message>
3642     <message>
3643       <source>STB_CHANGE_ORIENTATION</source>
3644       <translation>向きを変更します。</translation>
3645     </message>
3646     <message>
3647       <source>STB_CHECK</source>
3648       <translation>形状の妥当性を確認</translation>
3649     </message>
3650     <message>
3651       <source>STB_CHECK_COMPOUND</source>
3652       <translation>ブロックのアセンブリチェック</translation>
3653     </message>
3654     <message>
3655       <source>STB_GET_NON_BLOCKS</source>
3656       <translation>純色のブロックを取得します。</translation>
3657     </message>
3658     <message>
3659       <source>STB_CHECK_SELF_INTERSECTIONS</source>
3660       <translation>自己交差の確認</translation>
3661     </message>
3662     <message>
3663       <source>STB_FAST_CHECK_INTERSECTIONS</source>
3664       <translation>クイック交点</translation>
3665     </message>
3666     <message>
3667       <source>STB_SHAPE_STATISTICS</source>
3668       <translation>形状の統計</translation>
3669     </message>
3670     <message>
3671       <source>STB_CHECK_FREE_BNDS</source>
3672       <translation>自由境界をチェック</translation>
3673     </message>
3674     <message>
3675       <source>STB_CHECK_FREE_FACES</source>
3676       <translation>フリーフェースチェック</translation>
3677     </message>
3678     <message>
3679       <source>STB_CHECK_GEOMETRY</source>
3680       <translation>ジオメトリチェック</translation>
3681     </message>
3682     <message>
3683       <source>STB_CIRCLE</source>
3684       <translation>円を作成</translation>
3685     </message>
3686     <message>
3687       <source>STB_CLOSE_CONTOUR</source>
3688       <translation>スケッチを終了</translation>
3689     </message>
3690     <message>
3691       <source>STB_COMMON</source>
3692       <translation>共有領域</translation>
3693     </message>
3694     <message>
3695       <source>STB_COMPOUND</source>
3696       <translation>アセンブリをビルド</translation>
3697     </message>
3698     <message>
3699       <source>STB_COMPOUND_SEL_ONLY</source>
3700       <translation>アセンブリのみを選択</translation>
3701     </message>
3702     <message>
3703       <source>STB_CONE</source>
3704       <translation>円錐を作成</translation>
3705     </message>
3706     <message>
3707       <source>STB_CURVE</source>
3708       <translation>カーブを作成</translation>
3709     </message>
3710     <message>
3711       <source>STB_CUT</source>
3712       <translation>Cut</translation>
3713     </message>
3714     <message>
3715       <source>STB_CYLINDER</source>
3716       <translation>円柱を作成</translation>
3717     </message>
3718     <message>
3719       <source>STB_RECTANGLE</source>
3720       <translation>長方形の面を作成</translation>
3721     </message>
3722     <message>
3723       <source>STB_DELETE</source>
3724       <translation>オブジェクトを削除</translation>
3725     </message>
3726     <message>
3727       <source>STB_DISK</source>
3728       <translation>円盤を作成</translation>
3729     </message>
3730     <message>
3731       <source>STB_DISPLAY</source>
3732       <translation>表示オブジェクト</translation>
3733     </message>
3734     <message>
3735       <source>STB_DISPLAY_ALL</source>
3736       <translation>すべてを表示</translation>
3737     </message>
3738     <message>
3739       <source>STB_DISPLAY_ONLY</source>
3740       <translation>選択のみ表示</translation>
3741     </message>
3742     <message>
3743       <source>STB_SHOW_ONLY_CHILDREN</source>
3744       <translation>子供だけを表示します。</translation>
3745     </message>
3746     <message>
3747       <source>STB_EDGE</source>
3748       <translation>エッジを作成</translation>
3749     </message>
3750     <message>
3751       <source>STB_EDGE_SEL_ONLY</source>
3752       <translation>エッジだけを選択</translation>
3753     </message>
3754     <message>
3755       <source>STB_ELLIPSE</source>
3756       <translation>楕円を作成</translation>
3757     </message>
3758     <message>
3759       <source>STB_ERASE</source>
3760       <translation>オブジェクトを非表示</translation>
3761     </message>
3762     <message>
3763       <source>STB_ERASE_ALL</source>
3764       <translation>すべてを非表示</translation>
3765     </message>
3766     <message>
3767       <source>STB_EXPLODE</source>
3768       <translation>展開</translation>
3769     </message>
3770     <message>
3771       <source>STB_EXPLODE_BLOCKS</source>
3772       <translation>ブロックで展開</translation>
3773     </message>
3774     <message>
3775       <source>STB_EXTRUSION</source>
3776       <translation>押し出しを作成</translation>
3777     </message>
3778     <message>
3779       <source>STB_EXTRUDED_CUT</source>
3780       <translation>押出成形材料の除去</translation>
3781     </message>
3782     <message>
3783       <source>STB_EXTRUDED_BOSS</source>
3784       <translation>押出し</translation>
3785     </message>
3786     <message>
3787       <source>STB_FACE</source>
3788       <translation>フェースを作成</translation>
3789     </message>
3790     <message>
3791       <source>STB_FACE_SEL_ONLY</source>
3792       <translation>フェースだけを選択</translation>
3793     </message>
3794     <message>
3795       <source>STB_FILLET</source>
3796       <translation>3Dフィレットを作成</translation>
3797     </message>
3798     <message>
3799       <source>STB_FILLET_1D</source>
3800       <translation>1Dフィレットを作成</translation>
3801     </message>
3802     <message>
3803       <source>STB_FILLET_2D</source>
3804       <translation>2Dフィレットを作成</translation>
3805     </message>
3806     <message>
3807       <source>STB_FILLING</source>
3808       <translation>埋込みを作成</translation>
3809     </message>
3810     <message>
3811       <source>STB_FUSE</source>
3812       <translation>結合</translation>
3813     </message>
3814     <message>
3815       <source>STB_GLUE_FACES</source>
3816       <translation>フェース固着</translation>
3817     </message>
3818     <message>
3819       <source>STB_GLUE_EDGES</source>
3820       <translation>エッジ固着</translation>
3821     </message>
3822     <message>
3823       <source>STB_GROUP_CREATE</source>
3824       <translation>グループを作成</translation>
3825     </message>
3826     <message>
3827       <source>STB_GROUP_EDIT</source>
3828       <translation>グループを編集</translation>
3829     </message>
3830     <message>
3831       <source>STB_GROUP_UNION</source>
3832       <translation>グループの連合</translation>
3833     </message>
3834     <message>
3835       <source>STB_GROUP_INTERSECT</source>
3836       <translation>グループの共有領域</translation>
3837     </message>
3838     <message>
3839       <source>STB_GROUP_CUT</source>
3840       <translation>切断グループ</translation>
3841     </message>
3842     <message>
3843       <source>STB_FIELD_CREATE</source>
3844       <translation>フィールドを作成します。</translation>
3845     </message>
3846     <message>
3847       <source>STB_FIELD_EDIT</source>
3848       <translation>フィールドを編集します。</translation>
3849     </message>
3850     <message>
3851       <source>STB_RELOAD_IMPORTED</source>
3852       <translation>ディスク上の元の場所からインポートした形状をリロード</translation>
3853     </message>
3854     <message>
3855       <source>STB_HEX_SOLID</source>
3856       <translation>Hexahedral_Solid</translation>
3857     </message>
3858     <message>
3859       <source>STB_INERTIA</source>
3860       <translation>オブジェクトの慣性モーメントを計算します。</translation>
3861     </message>
3862     <message>
3863       <source>STB_ISOS</source>
3864       <translation>輪郭線の数を設定</translation>
3865     </message>
3866     <message>
3867       <source>STB_LINE</source>
3868       <translation>ラインを作成</translation>
3869     </message>
3870     <message>
3871       <source>STB_LIMIT_TOLERANCE</source>
3872       <translation>許容範囲</translation>
3873     </message>
3874     <message>
3875       <source>STB_LOCAL_CS</source>
3876       <translation>ローカル座標系を作成</translation>
3877     </message>
3878     <message>
3879       <source>STB_MASS_CENTER</source>
3880       <translation>オブジェクトの重心を計算</translation>
3881     </message>
3882     <message>
3883       <source>STB_MIN_DIST</source>
3884       <translation>2つのオブジェクト間の最小距離を計算</translation>
3885     </message>
3886     <message>
3887       <source>STB_MIRROR</source>
3888       <translation>オブジェクトを反転</translation>
3889     </message>
3890     <message>
3891       <source>STB_MODIFY_LOCATION</source>
3892       <translation>オブジェクトの位置を変更</translation>
3893     </message>
3894     <message>
3895       <source>STB_MUL_ROTATION</source>
3896       <translation>複数回回転を実行します。</translation>
3897     </message>
3898     <message>
3899       <source>STB_MUL_TRANSFORM</source>
3900       <translation>複数回移動を実行します。</translation>
3901     </message>
3902     <message>
3903       <source>STB_MUL_TRANSLATION</source>
3904       <translation>複数オブジェクトの移動を実行</translation>
3905     </message>
3906     <message>
3907       <source>STB_OFFSET</source>
3908       <translation>サーフェスをオフセット</translation>
3909     </message>
3910     <message>
3911       <source>STB_PROJECTION</source>
3912       <translation>ポイント、エッジ、または輪郭上の 1 つの側面を投影</translation>
3913     </message>
3914     <message>
3915       <source>STB_PROJ_ON_CYL</source>
3916       <translation>円筒上のワイヤまたは面を投影</translation>
3917     </message>
3918     <message>
3919       <source>STB_ORIGIN_AND_VECTORS</source>
3920       <translation>起源と基底ベクトルを作成します。</translation>
3921     </message>
3922     <message>
3923       <source>STB_PARTITION</source>
3924       <translation>パーティションを作成</translation>
3925     </message>
3926     <message>
3927       <source>STB_PIPE</source>
3928       <translation>経路に沿って押し出し</translation>
3929     </message>
3930     <message>
3931       <source>STB_PIPE_PATH</source>
3932       <translation>経路の復元</translation>
3933     </message>
3934     <message>
3935       <source>STB_THICKNESS</source>
3936       <translation>厚みのあるソリッドの作成</translation>
3937     </message>
3938     <message>
3939       <source>STB_PLANE</source>
3940       <translation>平面を作成</translation>
3941     </message>
3942     <message>
3943       <source>STB_POINT</source>
3944       <translation>ポイントを作成</translation>
3945     </message>
3946     <message>
3947       <source>STB_POINT_COORDS</source>
3948       <translation>ポイントの座標を表示</translation>
3949     </message>
3950     <message>
3951       <source>STB_POINT_ON_EDGE</source>
3952       <translation>端にポイントを追加</translation>
3953     </message>
3954     <message>
3955       <source>STB_POP_COLOR</source>
3956       <translation>色</translation>
3957     </message>
3958     <message>
3959       <source>STB_POP_CREATE_GROUP</source>
3960       <translation>グループを作成</translation>
3961     </message>
3962     <message>
3963       <source>STB_POP_EDIT_FIELD</source>
3964       <translation>フィールドを編集します。</translation>
3965     </message>
3966     <message>
3967       <source>STB_POP_UNPUBLISH_OBJ</source>
3968       <translation>オブジェクトの発行停止</translation>
3969     </message>
3970     <message>
3971       <source>STB_POP_PUBLISH_OBJ</source>
3972       <translation>オブジェクトを発行</translation>
3973     </message>
3974     <message>
3975       <source>STB_POP_DISCLOSE_CHILDREN</source>
3976       <translation>子供を表示します。</translation>
3977     </message>
3978     <message>
3979       <source>STB_POP_CONCEAL_CHILDREN</source>
3980       <translation>子供オブジェクトを隠す</translation>
3981     </message>
3982     <message>
3983       <source>STB_POP_ISOS</source>
3984       <translation>輪郭</translation>
3985     </message>
3986     <message>
3987       <source>STB_POP_DEFLECTION</source>
3988       <translation>変形倍率</translation>
3989     </message>
3990     <message>
3991       <source>STB_POP_RENAME</source>
3992       <translation>名前変更</translation>
3993     </message>
3994     <message>
3995       <source>STB_POP_SHADING</source>
3996       <translation>網かけ</translation>
3997     </message>
3998     <message>
3999       <source>STB_POP_SHADING_WITH_EDGES</source>
4000       <translation>陰影とエッジ</translation>
4001     </message>
4002     <message>
4003       <source>STB_POP_TEXTURE</source>
4004       <translation>テクスチャ</translation>
4005     </message>
4006     <message>
4007       <source>STB_POP_VECTORS</source>
4008       <translation>エッジの方向を表示します。</translation>
4009     </message>
4010     <message>
4011       <source>STB_POP_VERTICES</source>
4012       <translation>頂点の表示</translation>
4013     </message>
4014     <message>
4015       <source>STB_POP_SHOW_NAME</source>
4016       <translation>名前の表示</translation>
4017     </message>
4018     <message>
4019       <source>STB_POP_SETTEXTURE</source>
4020       <translation>テクスチャを追加します。</translation>
4021     </message>
4022     <message>
4023       <source>STB_POP_TRANSPARENCY</source>
4024       <translation>透明度</translation>
4025     </message>
4026     <message>
4027       <source>STB_POP_WIREFRAME</source>
4028       <translation>Wires</translation>
4029     </message>
4030     <message>
4031       <source>STB_MATERIALS_LIBRARY</source>
4032       <translation>材料のライブラリの内容を表示します。</translation>
4033     </message>
4034     <message>
4035       <source>STB_POP_PREDEF_MATER_CUSTOM</source>
4036       <translation>カスタム.</translation>
4037     </message>
4038     <message>
4039       <source>STB_PROPAGATE</source>
4040       <translation>スプレッド</translation>
4041     </message>
4042     <message>
4043       <source>STB_Q_FACE</source>
4044       <translation>四角形フェース</translation>
4045     </message>
4046     <message>
4047       <source>STB_REVOLUTION</source>
4048       <translation>回転押し出しの作成</translation>
4049     </message>
4050     <message>
4051       <source>STB_ROTATION</source>
4052       <translation>オブジェクトを回転</translation>
4053     </message>
4054     <message>
4055       <source>STB_SCALE</source>
4056       <translation>オブジェクトのサイズを変更</translation>
4057     </message>
4058     <message>
4059       <source>STB_SECTION</source>
4060       <translation>セクション</translation>
4061     </message>
4062     <message>
4063       <source>STB_SEWING</source>
4064       <translation>縫い合わせ実行</translation>
4065     </message>
4066     <message>
4067       <source>STB_WIREFRAME</source>
4068       <translation>Wires</translation>
4069     </message>
4070     <message>
4071       <source>STB_SHADING</source>
4072       <translation>網かけ</translation>
4073     </message>
4074     <message>
4075       <source>STB_SHADING_WITH_EDGES</source>
4076       <translation>陰影とエッジ</translation>
4077     </message>
4078     <message>
4079       <source>STB_VECTOR_MODE</source>
4080       <translation>エッジの表示モードを変更</translation>
4081     </message>
4082     <message>
4083       <source>STB_NAME_MODE</source>
4084       <translation>表示中の形状の名前を表示/非表示</translation>
4085     </message>
4086     <message>
4087       <source>STB_SHADING_COLOR</source>
4088       <translation>網かけの色を設定</translation>
4089     </message>
4090     <message>
4091       <source>STB_SHAPE_PROCESS</source>
4092       <translation>形状処理を実行する</translation>
4093     </message>
4094     <message>
4095       <source>STB_SHELL</source>
4096       <translation>シェルを構築</translation>
4097     </message>
4098     <message>
4099       <source>STB_SHELL_SEL_ONLY</source>
4100       <translation>シェルのみを選択</translation>
4101     </message>
4102     <message>
4103       <source>STB_SKETCH</source>
4104       <translation>2Dスケッチを作成</translation>
4105     </message>
4106     <message>
4107       <source>STB_3DSKETCH</source>
4108       <translation>3Dスケッチを作成</translation>
4109     </message>
4110     <message>
4111       <source>STB_ISOLINE</source>
4112       <translation>UまたはV方向等高線の作成</translation>
4113     </message>
4114     <message>
4115       <source>STB_SURFACE_FROM_FACE</source>
4116       <translation>面から表面の作成</translation>
4117     </message>
4118     <message>
4119       <source>STB_SOLID</source>
4120       <translation>ソリッドを構築</translation>
4121     </message>
4122     <message>
4123       <source>STB_SOLID_SEL_ONLY</source>
4124       <translation>ソリッドだけを選択</translation>
4125     </message>
4126     <message>
4127       <source>STB_SPHERE</source>
4128       <translation>球を作成</translation>
4129     </message>
4130     <message>
4131       <source>STB_STEP_VALUE</source>
4132       <translation>ステップの値を設定</translation>
4133     </message>
4134     <message>
4135       <source>STB_SUPPERSS_HOLES</source>
4136       <translation>穴の削除を実行</translation>
4137     </message>
4138     <message>
4139       <source>STB_SUPPRESS_FACES</source>
4140       <translation>フェースの削除を実行</translation>
4141     </message>
4142     <message>
4143       <source>STB_SUPPRESS_INT_WIRES</source>
4144       <translation>内部ワイヤーの削除を実行</translation>
4145     </message>
4146     <message>
4147       <source>STB_TOLERANCE</source>
4148       <translation>オブジェクトの距離を計算</translation>
4149     </message>
4150     <message>
4151       <source>STB_TORUS</source>
4152       <translation>円環を作成</translation>
4153     </message>
4154     <message>
4155       <source>STB_TRANSLATION</source>
4156       <translation>オブジェクトを移動</translation>
4157     </message>
4158     <message>
4159       <source>STB_VECTOR</source>
4160       <translation>ベクトルを作成</translation>
4161     </message>
4162     <message>
4163       <source>STB_VERTEX_SEL_ONLY</source>
4164       <translation>ポイントのみを選択</translation>
4165     </message>
4166     <message>
4167       <source>STB_WHAT_IS</source>
4168       <translation>Whatis</translation>
4169     </message>
4170     <message>
4171       <source>STB_WIRE</source>
4172       <translation>ワイヤーを構築</translation>
4173     </message>
4174     <message>
4175       <source>STB_WIRE_SEL_ONLY</source>
4176       <translation>ワイヤーだけを選択</translation>
4177     </message>
4178     <message>
4179       <source>STB_WORK_PLANE</source>
4180       <translation>作業平面を作成</translation>
4181     </message>
4182     <message>
4183       <source>STB_POP_POINT_MARKER</source>
4184       <translation>ポイントマーカーを設定</translation>
4185     </message>
4186     <message>
4187       <source>STB_POP_MATERIAL_PROPERTIES</source>
4188       <translation>マテリアルのプロパティを設定します。</translation>
4189     </message>
4190     <message>
4191       <source>SUPPRESS_RESULT</source>
4192       <translation>結果を削除</translation>
4193     </message>
4194     <message>
4195       <source>SUPRESS_FACE_NEW_OBJ_NAME</source>
4196       <translation>SupressFaces</translation>
4197     </message>
4198     <message>
4199       <source>ShHealOper_ErrorExecution_msg</source>
4200       <translation>形状縫合に失敗</translation>
4201     </message>
4202     <message>
4203       <source>ShHealOper_InvalidParameters_msg</source>
4204       <translation>形状縫合アルゴリズムのパラメータが正しくありません</translation>
4205     </message>
4206     <message>
4207       <source>ShHealOper_NotError_msg</source>
4208       <translation>形状縫合アルゴリズムでは元の形状を変更しません</translation>
4209     </message>
4210     <message>
4211       <source>TLT_RENAME</source>
4212       <translation>名前変更</translation>
4213     </message>
4214     <message>
4215       <source>TOM_O</source>
4216       <translation>O</translation>
4217     </message>
4218     <message>
4219       <source>TOM_O_PLUS</source>
4220       <translation>+ in O</translation>
4221     </message>
4222     <message>
4223       <source>TOM_O_POINT</source>
4224       <translation>. in O</translation>
4225     </message>
4226     <message>
4227       <source>TOM_O_STAR</source>
4228       <translation>* in O</translation>
4229     </message>
4230     <message>
4231       <source>TOM_O_X</source>
4232       <translation>X in O</translation>
4233     </message>
4234     <message>
4235       <source>TOM_PLUS</source>
4236       <translation>+</translation>
4237     </message>
4238     <message>
4239       <source>TOM_POINT</source>
4240       <translation>.</translation>
4241     </message>
4242     <message>
4243       <source>TOM_STAR</source>
4244       <translation>*</translation>
4245     </message>
4246     <message>
4247       <source>TOM_X</source>
4248       <translation>X</translation>
4249     </message>
4250     <message>
4251       <source>TOP_ARC</source>
4252       <translation>円弧を作成</translation>
4253     </message>
4254     <message>
4255       <source>TOP_ARCHIMEDE</source>
4256       <translation>アルキメデス法で水位面を作成</translation>
4257     </message>
4258     <message>
4259       <source>TOP_BASIC_PROPS</source>
4260       <translation>基本プロパティ</translation>
4261     </message>
4262     <message>
4263       <source>TOP_BND_BOX</source>
4264       <translation>境界ボックス</translation>
4265     </message>
4266     <message>
4267       <source>TOP_BOX</source>
4268       <translation>ボックスを作成</translation>
4269     </message>
4270     <message>
4271       <source>TOP_CHAMFER</source>
4272       <translation>面取り</translation>
4273     </message>
4274     <message>
4275       <source>TOP_CHANGE_ORIENTATION</source>
4276       <translation>向きを変更します。</translation>
4277     </message>
4278     <message>
4279       <source>TOP_CHECK</source>
4280       <translation>オブジェクトを確認</translation>
4281     </message>
4282     <message>
4283       <source>TOP_CHECK_COMPOUND</source>
4284       <translation>ブロック アセンブリを確認</translation>
4285     </message>
4286     <message>
4287       <source>TOP_GET_NON_BLOCKS</source>
4288       <translation>純色のブロックを取得します。</translation>
4289     </message>
4290     <message>
4291       <source>TOP_CHECK_SELF_INTERSECTIONS</source>
4292       <translation>自己交差の確認</translation>
4293     </message>
4294     <message>
4295       <source>TOP_FAST_CHECK_INTERSECTIONS</source>
4296       <translation>クイック交点</translation>
4297     </message>
4298     <message>
4299       <source>TOP_SHAPE_STATISTICS</source>
4300       <translation>形状の統計</translation>
4301     </message>
4302     <message>
4303       <source>TOP_CHECK_FREE_BNDS</source>
4304       <translation>自由境界を確認</translation>
4305     </message>
4306     <message>
4307       <source>TOP_CHECK_FREE_FACES</source>
4308       <translation>フリーフェースチェック</translation>
4309     </message>
4310     <message>
4311       <source>TOP_CHECK_GEOMETRY</source>
4312       <translation>ジオメトリチェック</translation>
4313     </message>
4314     <message>
4315       <source>TOP_CIRCLE</source>
4316       <translation>円を作成</translation>
4317     </message>
4318     <message>
4319       <source>TOP_CLOSE_CONTOUR</source>
4320       <translation>スケッチを終了</translation>
4321     </message>
4322     <message>
4323       <source>TOP_COMMON</source>
4324       <translation>共有領域</translation>
4325     </message>
4326     <message>
4327       <source>TOP_COMPOUND</source>
4328       <translation>アセンブリをビルド</translation>
4329     </message>
4330     <message>
4331       <source>TOP_CONE</source>
4332       <translation>円錐を作成</translation>
4333     </message>
4334     <message>
4335       <source>TOP_CURVE</source>
4336       <translation>カーブを作成</translation>
4337     </message>
4338     <message>
4339       <source>TOP_CUT</source>
4340       <translation>Cut</translation>
4341     </message>
4342     <message>
4343       <source>TOP_CYLINDER</source>
4344       <translation>円柱を作成</translation>
4345     </message>
4346     <message>
4347       <source>TOP_DELETE</source>
4348       <translation>オブジェクトを削除</translation>
4349     </message>
4350     <message>
4351       <source>TOP_RECTANGLE</source>
4352       <translation>長方形のフェース作成</translation>
4353     </message>
4354     <message>
4355       <source>TOP_DISK</source>
4356       <translation>円盤を作成</translation>
4357     </message>
4358     <message>
4359       <source>TOP_DISPLAY</source>
4360       <translation>表示</translation>
4361     </message>
4362     <message>
4363       <source>TOP_DISPLAY_ALL</source>
4364       <translation>すべてを表示</translation>
4365     </message>
4366     <message>
4367       <source>TOP_DISPLAY_ONLY</source>
4368       <translation>選択のみ表示</translation>
4369     </message>
4370     <message>
4371       <source>TOP_SHOW_ONLY_CHILDREN</source>
4372       <translation>子供だけを表示します。</translation>
4373     </message>
4374     <message>
4375       <source>TOP_EDGE</source>
4376       <translation>エッジを構築</translation>
4377     </message>
4378     <message>
4379       <source>TOP_ELLIPSE</source>
4380       <translation>楕円を作成</translation>
4381     </message>
4382     <message>
4383       <source>TOP_ERASE</source>
4384       <translation>非表示</translation>
4385     </message>
4386     <message>
4387       <source>TOP_ERASE_ALL</source>
4388       <translation>すべてを非表示</translation>
4389     </message>
4390     <message>
4391       <source>TOP_EXPLODE</source>
4392       <translation>展開</translation>
4393     </message>
4394     <message>
4395       <source>TOP_EXPLODE_BLOCKS</source>
4396       <translation>ブロックで展開</translation>
4397     </message>
4398     <message>
4399       <source>TOP_EXTRUSION</source>
4400       <translation>押し出しを作成</translation>
4401     </message>
4402     <message>
4403       <source>TOP_EXTRUDED_BOSS</source>
4404       <translation>押出し</translation>
4405     </message>
4406     <message>
4407       <source>TOP_EXTRUDED_CUT</source>
4408       <translation>押出しカット</translation>
4409     </message>
4410     <message>
4411       <source>TOP_FACE</source>
4412       <translation>フェースを作成</translation>
4413     </message>
4414     <message>
4415       <source>TOP_FILLET</source>
4416       <translation>3Dフィレット</translation>
4417     </message>
4418     <message>
4419       <source>TOP_FILLET_1D</source>
4420       <translation>1D フィレット作成</translation>
4421     </message>
4422     <message>
4423       <source>TOP_FILLET_2D</source>
4424       <translation>2D フィレット作成</translation>
4425     </message>
4426     <message>
4427       <source>TOP_FILLING</source>
4428       <translation>埋込みを作成</translation>
4429     </message>
4430     <message>
4431       <source>TOP_FUSE</source>
4432       <translation>結合</translation>
4433     </message>
4434     <message>
4435       <source>TOP_GLUE_FACES</source>
4436       <translation>フェース固着</translation>
4437     </message>
4438     <message>
4439       <source>TOP_GLUE_EDGES</source>
4440       <translation>エッジ固着</translation>
4441     </message>
4442     <message>
4443       <source>TOP_GROUP_CREATE</source>
4444       <translation>グループを作成</translation>
4445     </message>
4446     <message>
4447       <source>TOP_GROUP_EDIT</source>
4448       <translation>グループを編集</translation>
4449     </message>
4450     <message>
4451       <source>TOP_GROUP_UNION</source>
4452       <translation>グループの連合</translation>
4453     </message>
4454     <message>
4455       <source>TOP_GROUP_INTERSECT</source>
4456       <translation>グループの共有領域</translation>
4457     </message>
4458     <message>
4459       <source>TOP_GROUP_CUT</source>
4460       <translation>切断グループ</translation>
4461     </message>
4462     <message>
4463       <source>TOP_FIELD_CREATE</source>
4464       <translation>フィールドを作成します。</translation>
4465     </message>
4466     <message>
4467       <source>TOP_FIELD_EDIT</source>
4468       <translation>フィールドを編集します。</translation>
4469     </message>
4470     <message>
4471       <source>TOP_HEX_SOLID</source>
4472       <translation>Hexahedral_Solid</translation>
4473     </message>
4474     <message>
4475       <source>TOP_INERTIA</source>
4476       <translation>慣性モーメント</translation>
4477     </message>
4478     <message>
4479       <source>TOP_ISOS</source>
4480       <translation>輪郭線の数を設定</translation>
4481     </message>
4482     <message>
4483       <source>TOP_LINE</source>
4484       <translation>ラインを作成</translation>
4485     </message>
4486     <message>
4487       <source>TOP_LIMIT_TOLERANCE</source>
4488       <translation>許容範囲</translation>
4489     </message>
4490     <message>
4491       <source>TOP_LOCAL_CS</source>
4492       <translation>ローカル座標系を作成</translation>
4493     </message>
4494     <message>
4495       <source>TOP_MASS_CENTER</source>
4496       <translation>重心</translation>
4497     </message>
4498     <message>
4499       <source>TOP_MIN_DIST</source>
4500       <translation>最小距離</translation>
4501     </message>
4502     <message>
4503       <source>TOP_MIRROR</source>
4504       <translation>オブジェクトの反転</translation>
4505     </message>
4506     <message>
4507       <source>TOP_MODIFY_LOCATION</source>
4508       <translation>座標系変更</translation>
4509     </message>
4510     <message>
4511       <source>TOP_MUL_ROTATION</source>
4512       <translation>複数回回転</translation>
4513     </message>
4514     <message>
4515       <source>TOP_MUL_TRANSFORM</source>
4516       <translation>複数回移動</translation>
4517     </message>
4518     <message>
4519       <source>TOP_MUL_TRANSLATION</source>
4520       <translation>複数オブジェクトの移動</translation>
4521     </message>
4522     <message>
4523       <source>TOP_PICTURE_IMPORT</source>
4524       <translation>ビューアーにイメージをインポート</translation>
4525     </message>
4526     <message>
4527       <source>TOP_FEATURE_DETECTION</source>
4528       <translation>パターン認識</translation>
4529     </message>
4530     <message>
4531       <source>TOP_OFFSET</source>
4532       <translation>サーフェスをオフセット</translation>
4533     </message>
4534     <message>
4535       <source>TOP_PROJECTION</source>
4536       <translation>投影</translation>
4537     </message>
4538     <message>
4539       <source>TOP_PROJ_ON_CYL</source>
4540       <translation>円筒上に投影</translation>
4541     </message>
4542     <message>
4543       <source>TOP_ORIGIN_AND_VECTORS</source>
4544       <translation>起源と根拠のベクトルを作成します。</translation>
4545     </message>
4546     <message>
4547       <source>TOP_PARTITION</source>
4548       <translation>パーティション</translation>
4549     </message>
4550     <message>
4551       <source>TOP_PIPE</source>
4552       <translation>経路に沿って押し出し</translation>
4553     </message>
4554     <message>
4555       <source>TOP_PIPE_PATH</source>
4556       <translation>経路の復元</translation>
4557     </message>
4558     <message>
4559       <source>TOP_THICKNESS</source>
4560       <translation>厚み</translation>
4561     </message>
4562     <message>
4563       <source>TOP_PLANE</source>
4564       <translation>平面を作成</translation>
4565     </message>
4566     <message>
4567       <source>TOP_POINT</source>
4568       <translation>ポイントを作成</translation>
4569     </message>
4570     <message>
4571       <source>TOP_POINT_COORDS</source>
4572       <translation>軸に目盛り付け</translation>
4573     </message>
4574     <message>
4575       <source>TOP_POINT_ON_EDGE</source>
4576       <translation>端にポイントを追加</translation>
4577     </message>
4578     <message>
4579       <source>TOP_POP_COLOR</source>
4580       <translation>色</translation>
4581     </message>
4582     <message>
4583       <source>TOP_POP_CREATE_GROUP</source>
4584       <translation>グループを作成</translation>
4585     </message>
4586     <message>
4587       <source>TOP_POP_EDIT_FIELD</source>
4588       <translation>フィールドを編集します。</translation>
4589     </message>
4590     <message>
4591       <source>TOP_POP_UNPUBLISH_OBJ</source>
4592       <translation>オブジェクトの発行停止</translation>
4593     </message>
4594     <message>
4595       <source>TOP_POP_PUBLISH_OBJ</source>
4596       <translation>オブジェクトを発行</translation>
4597     </message>
4598     <message>
4599       <source>TOP_POP_DISCLOSE_CHILDREN</source>
4600       <translation>子供を表示します。</translation>
4601     </message>
4602     <message>
4603       <source>TOP_POP_CONCEAL_CHILDREN</source>
4604       <translation>子供オブジェクトを隠す</translation>
4605     </message>
4606     <message>
4607       <source>TOP_POP_ISOS</source>
4608       <translation>輪郭</translation>
4609     </message>
4610     <message>
4611       <source>TOP_POP_DEFLECTION</source>
4612       <translation>変形倍率</translation>
4613     </message>
4614     <message>
4615       <source>TOP_POP_RENAME</source>
4616       <translation>名前変更</translation>
4617     </message>
4618     <message>
4619       <source>TOP_POP_SHADING</source>
4620       <translation>網かけ</translation>
4621     </message>
4622     <message>
4623       <source>TOP_POP_SHADING_WITH_EDGES</source>
4624       <translation>陰影とエッジ</translation>
4625     </message>
4626     <message>
4627       <source>TOP_POP_SETTEXTURE</source>
4628       <translation>テクスチャ</translation>
4629     </message>
4630     <message>
4631       <source>TOP_POP_TRANSPARENCY</source>
4632       <translation>透明度</translation>
4633     </message>
4634     <message>
4635       <source>TOP_POP_WIREFRAME</source>
4636       <translation>Wires</translation>
4637     </message>
4638     <message>
4639       <source>TOP_PROPAGATE</source>
4640       <translation>スプレッド</translation>
4641     </message>
4642     <message>
4643       <source>TOP_Q_FACE</source>
4644       <translation>四角形フェース</translation>
4645     </message>
4646     <message>
4647       <source>TOP_REVOLUTION</source>
4648       <translation>回転押し出しの作成</translation>
4649     </message>
4650     <message>
4651       <source>TOP_ROTATION</source>
4652       <translation>回転</translation>
4653     </message>
4654     <message>
4655       <source>TOP_SCALE</source>
4656       <translation>サイズ変更</translation>
4657     </message>
4658     <message>
4659       <source>TOP_SECTION</source>
4660       <translation>セクション</translation>
4661     </message>
4662     <message>
4663       <source>TOP_SEWING</source>
4664       <translation>裁縫をします。</translation>
4665     </message>
4666     <message>
4667       <source>TOP_SHADING</source>
4668       <translation>網かけ</translation>
4669     </message>
4670     <message>
4671       <source>TOP_SHADING_COLOR</source>
4672       <translation>網かけの色を設定</translation>
4673     </message>
4674     <message>
4675       <source>TOP_SHAPE_PROCESS</source>
4676       <translation>形状処理を実行する</translation>
4677     </message>
4678     <message>
4679       <source>TOP_SHELL</source>
4680       <translation>シェルを構築</translation>
4681     </message>
4682     <message>
4683       <source>TOP_SKETCH</source>
4684       <translation>2D スケッチ</translation>
4685     </message>
4686     <message>
4687       <source>TOP_3DSKETCH</source>
4688       <translation>3D_Sketcher</translation>
4689     </message>
4690     <message>
4691       <source>TOP_ISOLINE</source>
4692       <translation>等高線</translation>
4693     </message>
4694     <message>
4695       <source>TOP_SURFACE_FROM_FACE</source>
4696       <translation>面から表面</translation>
4697     </message>
4698     <message>
4699       <source>TOP_SOLID</source>
4700       <translation>ソリッドを作成</translation>
4701     </message>
4702     <message>
4703       <source>TOP_SPHERE</source>
4704       <translation>球を作成</translation>
4705     </message>
4706     <message>
4707       <source>TOP_STEP_VALUE</source>
4708       <translation>ステップ値を設定</translation>
4709     </message>
4710     <message>
4711       <source>TOP_SUPPERSS_HOLES</source>
4712       <translation>穴を削除</translation>
4713     </message>
4714     <message>
4715       <source>TOP_SUPPRESS_FACES</source>
4716       <translation>フェースを削除</translation>
4717     </message>
4718     <message>
4719       <source>TOP_SUPPRESS_INT_WIRES</source>
4720       <translation>内部のワイヤーを削除</translation>
4721     </message>
4722     <message>
4723       <source>TOP_TOLERANCE</source>
4724       <translation>公差</translation>
4725     </message>
4726     <message>
4727       <source>TOP_TORUS</source>
4728       <translation>円環を作成</translation>
4729     </message>
4730     <message>
4731       <source>TOP_TRANSLATION</source>
4732       <translation>移動</translation>
4733     </message>
4734     <message>
4735       <source>TOP_VECTOR</source>
4736       <translation>ベクトルを作成</translation>
4737     </message>
4738     <message>
4739       <source>TOP_WHAT_IS</source>
4740       <translation>Whatis</translation>
4741     </message>
4742     <message>
4743       <source>TOP_WIRE</source>
4744       <translation>ワイヤーを構築</translation>
4745     </message>
4746     <message>
4747       <source>TOP_WORK_PLANE</source>
4748       <translation>作業平面を作成</translation>
4749     </message>
4750     <message>
4751       <source>TOP_POP_POINT_MARKER</source>
4752       <translation>ポイント マーカー</translation>
4753     </message>
4754     <message>
4755       <source>TOP_POP_MATERIAL_PROPERTIES</source>
4756       <translation>材料の特性</translation>
4757     </message>
4758     <message>
4759       <source>WRN_NOT_IMPLEMENTED</source>
4760       <translation>申し訳ありませんが、この機能はまだ実装されていません</translation>
4761     </message>
4762     <message>
4763       <source>_S_</source>
4764       <translation>(s)</translation>
4765     </message>
4766     <message>
4767       <source>NOT_FOUND_ANY</source>
4768       <translation>エンティティが見つかりませんでした</translation>
4769     </message>
4770     <message>
4771       <source>GEOM_FACE_I</source>
4772       <translation>フェース %1</translation>
4773     </message>
4774     <message>
4775       <source>GEOM_CONSTANT_RADIUS</source>
4776       <translation>半径:</translation>
4777     </message>
4778     <message>
4779       <source>GEOM_R1</source>
4780       <translation>R1:</translation>
4781     </message>
4782     <message>
4783       <source>GEOM_R2</source>
4784       <translation>R2:</translation>
4785     </message>
4786     <message>
4787       <source>GEOM_BOTHWAY</source>
4788       <translation>両方向</translation>
4789     </message>
4790     <message>
4791       <source>GEOM_NORMALE</source>
4792       <translation>フェースに垂直</translation>
4793     </message>
4794     <message>
4795       <source>GEOM_VECTOR_NORMALE</source>
4796       <translation>Vecteur_Normale</translation>
4797     </message>
4798     <message>
4799       <source>GEOM_LINE1</source>
4800       <translation>線 1</translation>
4801     </message>
4802     <message>
4803       <source>GEOM_LINE2</source>
4804       <translation>線 2</translation>
4805     </message>
4806     <message>
4807       <source>GEOM_D</source>
4808       <translation>(D):</translation>
4809     </message>
4810     <message>
4811       <source>GEOM_CHAMFER_EDGE</source>
4812       <translation>共通の両面のエッジの面取り</translation>
4813     </message>
4814     <message>
4815       <source>SELECTED_EDGE</source>
4816       <translation>エッジ</translation>
4817     </message>
4818     <message>
4819       <source>GEOM_NORMALE_TITLE</source>
4820       <translation>フェースに垂直なベクトルを作成</translation>
4821     </message>
4822     <message>
4823       <source>GEOM_MEASURE_ANGLE_TITLE</source>
4824       <translation>2つのストレートエッジ、ライン、ベクトル間の角度</translation>
4825     </message>
4826     <message>
4827       <source>GEOM_MEASURE_ANGLE_ANGLE</source>
4828       <translation>角度</translation>
4829     </message>
4830     <message>
4831       <source>GEOM_MEASURE_ANGLE_OBJ</source>
4832       <translation>オブジェクトと結果</translation>
4833     </message>
4834     <message>
4835       <source>GEOM_MEASURE_ANGLE_DEG</source>
4836       <translation>角度 :</translation>
4837     </message>
4838     <message>
4839       <source>GEOM_MEASURE_ANGLE_RAD</source>
4840       <translation>ラジアン角 :</translation>
4841     </message>
4842     <message>
4843       <source>GEOM_LINE_INTERSECTION</source>
4844       <translation>線と点の交差の確認</translation>
4845     </message>
4846     <message>
4847       <source>GEOM_KEEP_NONLIMIT_SHAPES</source>
4848       <translation>下側のタイプの形状を保持</translation>
4849     </message>
4850     <message>
4851       <source>GEOM_NO_SELF_INTERSECTION</source>
4852       <translation>サブ図形 (アセンブリのみ） の交差部はありません</translation>
4853     </message>
4854     <message>
4855       <source>GEOM_CENTER_2POINTS</source>
4856       <translation>センターと2つのポイント</translation>
4857     </message>
4858     <message>
4859       <source>GEOM_REMOVE_WEBS_TITLE</source>
4860       <translation>内部面の削除</translation>
4861     </message>
4862     <message>
4863       <source>GEOM_REMOVE_WEBS</source>
4864       <translation>固体の混合物</translation>
4865     </message>
4866     <message>
4867       <source>REMOVE_WEBS_NEW_OBJ_NAME</source>
4868       <translation>NoInternalFaces</translation>
4869     </message>
4870     <message>
4871       <source>TOP_REMOVE_WEBS</source>
4872       <translation>内部面を削除します。</translation>
4873     </message>
4874     <message>
4875       <source>MEN_REMOVE_WEBS</source>
4876       <translation>内部面の削除</translation>
4877     </message>
4878     <message>
4879       <source>STB_REMOVE_WEBS</source>
4880       <translation>内部面を削除します。</translation>
4881     </message>
4882     <message>
4883       <source>GEOM_REMOVE_EXTRA_EDGES_TITLE</source>
4884       <translation>不要なエッジを削除</translation>
4885     </message>
4886     <message>
4887       <source>GEOM_BOOL_REMOVE_EXTRA_EDGES</source>
4888       <translation>不要なエッジの削除</translation>
4889     </message>
4890     <message>
4891       <source>GEOM_REMOVE_EXTRA_EDGES</source>
4892       <translation>オブジェクトが不要なエッジを削除します。</translation>
4893     </message>
4894     <message>
4895       <source>GEOM_RMEE_UNION_FACES</source>
4896       <translation>同じサーフェスに属するフェースを結合</translation>
4897     </message>
4898     <message>
4899       <source>REMOVE_EXTRA_EDGES_NEW_OBJ_NAME</source>
4900       <translation>NoExtraEdges</translation>
4901     </message>
4902     <message>
4903       <source>TOP_REMOVE_EXTRA_EDGES</source>
4904       <translation>不要なエッジを削除</translation>
4905     </message>
4906     <message>
4907       <source>MEN_REMOVE_EXTRA_EDGES</source>
4908       <translation>不要なエッジを削除</translation>
4909     </message>
4910     <message>
4911       <source>STB_REMOVE_EXTRA_EDGES</source>
4912       <translation>不要なエッジを削除</translation>
4913     </message>
4914     <message>
4915       <source>GEOM_FUSE_EDGES_TITLE</source>
4916       <translation>アウトライン内で共線性のエッジをマージします。</translation>
4917     </message>
4918     <message>
4919       <source>GEOM_FUSE_EDGES</source>
4920       <translation>エッジをマージします。</translation>
4921     </message>
4922     <message>
4923       <source>FUSE_EDGES_NEW_OBJ_NAME</source>
4924       <translation>FuseEdges</translation>
4925     </message>
4926     <message>
4927       <source>TOP_FUSE_EDGES</source>
4928       <translation>アウトライン内で共線性のエッジをマージします。</translation>
4929     </message>
4930     <message>
4931       <source>MEN_FUSE_EDGES</source>
4932       <translation>アウトライン内で共線性のエッジをマージします。</translation>
4933     </message>
4934     <message>
4935       <source>STB_FUSE_EDGES</source>
4936       <translation>アウトライン内で共線性のエッジをマージします。</translation>
4937     </message>
4938     <message>
4939       <source>TOP_UNION_FACES</source>
4940       <translation>連合に直面しています。</translation>
4941     </message>
4942     <message>
4943       <source>MEN_UNION_FACES</source>
4944       <translation>面の共有</translation>
4945     </message>
4946     <message>
4947       <source>STB_UNION_FACES</source>
4948       <translation>連合に直面しています。</translation>
4949     </message>
4950     <message>
4951       <source>TOP_INSPECT_OBJECT</source>
4952       <translation>オブジェクトの点検</translation>
4953     </message>
4954     <message>
4955       <source>MEN_INSPECT_OBJECT</source>
4956       <translation>オブジェクトの点検</translation>
4957     </message>
4958     <message>
4959       <source>STB_INSPECT_OBJECT</source>
4960       <translation>オブジェクトの点検</translation>
4961     </message>
4962     <message>
4963       <source>TOP_NORMALE</source>
4964       <translation>フェースに垂直</translation>
4965     </message>
4966     <message>
4967       <source>MEN_NORMALE</source>
4968       <translation>フェースに垂直</translation>
4969     </message>
4970     <message>
4971       <source>STB_NORMALE</source>
4972       <translation>フェースに垂直</translation>
4973     </message>
4974     <message>
4975       <source>TOP_MEASURE_ANGLE</source>
4976       <translation>角度</translation>
4977     </message>
4978     <message>
4979       <source>MEN_MEASURE_ANGLE</source>
4980       <translation>角度</translation>
4981     </message>
4982     <message>
4983       <source>STB_MEASURE_ANGLE</source>
4984       <translation>2つのラインまたはエッジ間の角度を計算</translation>
4985     </message>
4986     <message>
4987       <source>TOP_MANAGE_DIMENSIONS</source>
4988       <translation>ディメンジョンの管理</translation>
4989     </message>
4990     <message>
4991       <source>MEN_MANAGE_DIMENSIONS</source>
4992       <translation>ディメンジョンの管理</translation>
4993     </message>
4994     <message>
4995       <source>STB_MANAGE_DIMENSIONS</source>
4996       <translation>オブジェクトの基準寸法を管理</translation>
4997     </message>
4998     <message>
4999       <source>MEN_POP_SHOW_DEPENDENCY_TREE</source>
5000       <translation>依存ツリーの表示</translation>
5001     </message>
5002     <message>
5003       <source>STB_POP_SHOW_DEPENDENCY_TREE</source>
5004       <translation>依存ツリーの表示</translation>
5005     </message>
5006     <message>
5007       <source>MEN_POP_REDUCE_STUDY</source>
5008       <translation>スタディの削減</translation>
5009     </message>
5010     <message>
5011       <source>STB_POP_REDUCE_STUDY</source>
5012       <translation>スタディの縮小</translation>
5013     </message>
5014     <message>
5015       <source>MEN_POP_SHOW_ALL_DIMENSIONS</source>
5016       <translation>すべての寸法を表示</translation>
5017     </message>
5018     <message>
5019       <source>STB_POP_SHOW_ALL_DIMENSIONS</source>
5020       <translation>オブジェクトに作成されたすべての非表示の基準寸法を表示</translation>
5021     </message>
5022     <message>
5023       <source>TOP_POP_SHOW_ALL_DIMENSIONS</source>
5024       <translation>オブジェクトに作成されたすべての非表示の基準寸法を表示</translation>
5025     </message>
5026     <message>
5027       <source>MEN_POP_HIDE_ALL_DIMENSIONS</source>
5028       <translation>すべての寸法を非表示</translation>
5029     </message>
5030     <message>
5031       <source>STB_POP_HIDE_ALL_DIMENSIONS</source>
5032       <translation>オブジェクトのために作成されたすべての見える基準寸法を表示</translation>
5033     </message>
5034     <message>
5035       <source>TOP_POP_HIDE_ALL_DIMENSIONS</source>
5036       <translation>オブジェクトのために作成されたすべての見える基準寸法を表示</translation>
5037     </message>
5038     <message>
5039       <source>MEN_POP_SHOW_ALL_ANNOTATIONS</source>
5040       <translation type="unfinished">Show all annotations</translation>
5041     </message>
5042     <message>
5043       <source>STB_POP_SHOW_ALL_ANNOTATIONS</source>
5044       <translation type="unfinished">Show all shape annotations for the object</translation>
5045     </message>
5046     <message>
5047       <source>TOP_POP_SHOW_ALL_ANNOTATIONS</source>
5048       <translation type="unfinished">Show all shape annotations for the object</translation>
5049     </message>
5050     <message>
5051       <source>MEN_POP_HIDE_ALL_ANNOTATIONS</source>
5052       <translation type="unfinished">Hide all annotations</translation>
5053     </message>
5054     <message>
5055       <source>STB_POP_HIDE_ALL_ANNOTATIONS</source>
5056       <translation type="unfinished">Hide all shape annotations for the object</translation>
5057     </message>
5058     <message>
5059       <source>TOP_POP_HIDE_ALL_ANNOTATIONS</source>
5060       <translation type="unfinished">Hide all shape annotations for the object</translation>
5061     </message>
5062     <message>
5063       <source>TOP_POP_AUTO_COLOR</source>
5064       <translation>自動色</translation>
5065     </message>
5066     <message>
5067       <source>MEN_POP_AUTO_COLOR</source>
5068       <translation>自動色</translation>
5069     </message>
5070     <message>
5071       <source>STB_POP_AUTO_COLOR</source>
5072       <translation>自動色</translation>
5073     </message>
5074     <message>
5075       <source>TOP_POP_DISABLE_AUTO_COLOR</source>
5076       <translation>自動カラー補正を無効にします。</translation>
5077     </message>
5078     <message>
5079       <source>MEN_POP_DISABLE_AUTO_COLOR</source>
5080       <translation>自動色無効</translation>
5081     </message>
5082     <message>
5083       <source>STB_POP_DISABLE_AUTO_COLOR</source>
5084       <translation>自動カラー補正を無効にします。</translation>
5085     </message>
5086     <message>
5087       <source>MEN_POP_CREATE_FOLDER</source>
5088       <translation>フォルダ作成</translation>
5089     </message>
5090     <message>
5091       <source>STB_POP_CREATE_FOLDER</source>
5092       <translation>新しいフォルダーを作成します。</translation>
5093     </message>
5094     <message>
5095       <source>NEW_FOLDER_NAME</source>
5096       <translation>新規フォルダー</translation>
5097     </message>
5098     <message>
5099       <source>MEN_POP_SORT_CHILD_ITEMS</source>
5100       <translation>子供の並べ替え</translation>
5101     </message>
5102     <message>
5103       <source>STB_POP_SORT_CHILD_ITEMS</source>
5104       <translation>子アイテムを並べ替える</translation>
5105     </message>
5106     <message>
5107       <source>GEOM_RESULT_NAME_GRP</source>
5108       <translation>結果の名前</translation>
5109     </message>
5110     <message>
5111       <source>GEOM_RESULT_NAME_LBL</source>
5112       <translation>名前</translation>
5113     </message>
5114     <message>
5115       <source>GEOM_FILLING_APPROX</source>
5116       <translation>概算</translation>
5117     </message>
5118     <message>
5119       <source>GEOM_FILLING_METHOD</source>
5120       <translation>メソッド</translation>
5121     </message>
5122     <message>
5123       <source>GEOM_FILLING_DEFAULT</source>
5124       <translation>既定 (標準の動作)</translation>
5125     </message>
5126     <message>
5127       <source>GEOM_FILLING_USEORI</source>
5128       <translation>エッジの向きを使用</translation>
5129     </message>
5130     <message>
5131       <source>GEOM_FILLING_AUTO</source>
5132       <translation>エッジの向きを自動修正</translation>
5133     </message>
5134     <message>
5135       <source>GEOM_WRN_NO_APPROPRIATE_SELECTION</source>
5136       <translation>適当なオブジェクトが選択されていません</translation>
5137     </message>
5138     <message>
5139       <source>GEOM_SHAPES_ON_SHAPE</source>
5140       <translation>Shapes_On_Shape</translation>
5141     </message>
5142     <message>
5143       <source>GEOM_SHAPES_ON_SHAPE_ESHAPE</source>
5144       <translation>展開する形状</translation>
5145     </message>
5146     <message>
5147       <source>GEOM_SHAPES_ON_SHAPE_CSHAPE</source>
5148       <translation>チェックのためのソリッド</translation>
5149     </message>
5150     <message>
5151       <source>GEOM_SHAPES_ON_SHAPE_STATE</source>
5152       <translation>状態</translation>
5153     </message>
5154     <message>
5155       <source>GEOM_KIND_OF_SHAPE</source>
5156       <translation>形状の種類:</translation>
5157     </message>
5158     <message>
5159       <source>GEOM_CLOSED</source>
5160       <translation>閉じる</translation>
5161     </message>
5162     <message>
5163       <source>GEOM_UNCLOSED</source>
5164       <translation>オープン</translation>
5165     </message>
5166     <message>
5167       <source>GEOM_CLOSEDUNCLOSED</source>
5168       <translation>オブジェクトが開いているか閉じての場合は、定義されていません。可能性のあるエラーです。</translation>
5169     </message>
5170     <message>
5171       <source>GEOM_DISK_CIRCLE</source>
5172       <translation>Disk</translation>
5173     </message>
5174     <message>
5175       <source>GEOM_DISK_ELLIPSE</source>
5176       <translation>楕円形フェース</translation>
5177     </message>
5178     <message>
5179       <source>GEOM_PLANAR_FACE</source>
5180       <translation>平らなフェース</translation>
5181     </message>
5182     <message>
5183       <source>GEOM_PLANAR_EDGE_WIRE</source>
5184       <translation>フラットエッジによるワイヤー</translation>
5185     </message>
5186     <message>
5187       <source>GEOM_POLYGON</source>
5188       <translation>多角形</translation>
5189     </message>
5190     <message>
5191       <source>GEOM_POLYHEDRON</source>
5192       <translation>多面体</translation>
5193     </message>
5194     <message>
5195       <source>GEOM_NORMAL</source>
5196       <translation>法線方向</translation>
5197     </message>
5198     <message>
5199       <source>GEOM_DIRECTION</source>
5200       <translation>方向</translation>
5201     </message>
5202     <message>
5203       <source>GEOM_UPARAMETER</source>
5204       <translation>パラメーター U:</translation>
5205     </message>
5206     <message>
5207       <source>GEOM_VPARAMETER</source>
5208       <translation>パラメーター V：</translation>
5209     </message>
5210     <message>
5211       <source>GEOM_X_I</source>
5212       <translation>X%1 :</translation>
5213     </message>
5214     <message>
5215       <source>GEOM_Y_I</source>
5216       <translation>Y%1 :</translation>
5217     </message>
5218     <message>
5219       <source>GEOM_Z_I</source>
5220       <translation>Z%1 :</translation>
5221     </message>
5222     <message>
5223       <source>GEOM_A_I</source>
5224       <translation>A%1 :</translation>
5225     </message>
5226     <message>
5227       <source>GEOM_SHAPES_ON_SHAPE_TITLE</source>
5228       <translation>オブジェクトの要素を見つける</translation>
5229     </message>
5230     <message>
5231       <source>GEOM_SCALE_FACTOR_X</source>
5232       <translation>倍率　X</translation>
5233     </message>
5234     <message>
5235       <source>GEOM_SCALE_FACTOR_Y</source>
5236       <translation>倍率　Y</translation>
5237     </message>
5238     <message>
5239       <source>GEOM_SCALE_FACTOR_Z</source>
5240       <translation>倍率　Z</translation>
5241     </message>
5242     <message>
5243       <source>GEOM_STATE_IN</source>
5244       <translation>IN</translation>
5245     </message>
5246     <message>
5247       <source>GEOM_STATE_OUT</source>
5248       <translation>OUT</translation>
5249     </message>
5250     <message>
5251       <source>GEOM_STATE_ON</source>
5252       <translation>ON</translation>
5253     </message>
5254     <message>
5255       <source>GEOM_STATE_ONIN</source>
5256       <translation>ONIN</translation>
5257     </message>
5258     <message>
5259       <source>GEOM_STATE_ONOUT</source>
5260       <translation>ONOUT</translation>
5261     </message>
5262     <message>
5263       <source>GEOM_STATE_INOUT</source>
5264       <translation>INOUT</translation>
5265     </message>
5266     <message>
5267       <source>TOP_GET_SHAPES_ON_SHAPE</source>
5268       <translation>オブジェクトの要素を見つける</translation>
5269     </message>
5270     <message>
5271       <source>MEN_GET_SHAPES_ON_SHAPE</source>
5272       <translation>オブジェクトの要素を見つける</translation>
5273     </message>
5274     <message>
5275       <source>STB_GET_SHAPES_ON_SHAPE</source>
5276       <translation>オブジェクトの要素を見つける</translation>
5277     </message>
5278     <message>
5279       <source>TOP_GET_SHARED_SHAPES</source>
5280       <translation>オブジェクトの要素を見つける</translation>
5281     </message>
5282     <message>
5283       <source>MEN_GET_SHARED_SHAPES</source>
5284       <translation>共有アイテムを取得</translation>
5285     </message>
5286     <message>
5287       <source>STB_GET_SHARED_SHAPES</source>
5288       <translation>共有アイテムを取得</translation>
5289     </message>
5290     <message>
5291       <source>TOP_TRANSFER_DATA</source>
5292       <translation>データ転送</translation>
5293     </message>
5294     <message>
5295       <source>MEN_TRANSFER_DATA</source>
5296       <translation>データ転送</translation>
5297     </message>
5298     <message>
5299       <source>STB_TRANSFER_DATA</source>
5300       <translation>データ転送</translation>
5301     </message>
5302     <message>
5303       <source>TOP_EXTRACTION</source>
5304       <translation>抽出と再構築</translation>
5305     </message>
5306     <message>
5307       <source>MEN_EXTRACTION</source>
5308       <translation>抽出と再構築</translation>
5309     </message>
5310     <message>
5311       <source>STB_EXTRACTION</source>
5312       <translation>抽出と再構築</translation>
5313     </message>
5314     <message>
5315       <source>TOP_EXTENSION</source>
5316       <translation>エッジまたは面の拡張</translation>
5317     </message>
5318     <message>
5319       <source>MEN_EXTENSION</source>
5320       <translation>拡張</translation>
5321     </message>
5322     <message>
5323       <source>STB_EXTENSION</source>
5324       <translation>エッジまたは面の拡張</translation>
5325     </message>
5326     <message>
5327       <source>GEOM_PUBLISH_RESULT_GRP</source>
5328       <translation>高度なオプション</translation>
5329     </message>
5330     <message>
5331       <source>GEOM_RESTORE_SUB_SHAPES</source>
5332       <translation>グループとサブオブジェクトを継承します。</translation>
5333     </message>
5334     <message>
5335       <source>GEOM_RSS_ADD_FREFIX</source>
5336       <translation>継承したサブオブジェクトの名前にプレフィックスを追加します。</translation>
5337     </message>
5338     <message>
5339       <source>GEOM_PREVIEW</source>
5340       <translation>プレビュー</translation>
5341     </message>
5342     <message>
5343       <source>PREF_TAB_DEPENDENCY_VIEW</source>
5344       <translation>依存ツリー</translation>
5345     </message>
5346     <message>
5347       <source>PREF_HIERARCHY_TYPE</source>
5348       <translation>階層タイプ</translation>
5349     </message>
5350     <message>
5351       <source>MEN_ONLY_ASCENDANTS</source>
5352       <translation>ツリー上位のみ表示</translation>
5353     </message>
5354     <message>
5355       <source>MEN_ONLY_DESCENDANTS</source>
5356       <translation>ツリー下位のみ表示</translation>
5357     </message>
5358     <message>
5359       <source>MEN_BOTH_ASCENDANTS_DESCENDANTS</source>
5360       <translation>ツリー上位と下位の両方表示</translation>
5361     </message>
5362     <message>
5363       <source>GEOM_MOVE_POSSIBILITY</source>
5364       <translation>ノード移動可能性</translation>
5365     </message>
5366     <message>
5367       <source>PREF_GROUP_DEPENDENCY_VIEW_COLOR</source>
5368       <translation>色</translation>
5369     </message>
5370     <message>
5371       <source>PREF_DEPENDENCY_VIEW_BACKGROUND_COLOR</source>
5372       <translation>背景色</translation>
5373     </message>
5374     <message>
5375       <source>PREF_DEPENDENCY_VIEW_NODE_COLOR</source>
5376       <translation>デフォルトノード色</translation>
5377     </message>
5378     <message>
5379       <source>PREF_DEPENDENCY_VIEW_MAIN_NODE_COLOR</source>
5380       <translation>主ノード色</translation>
5381     </message>
5382     <message>
5383       <source>PREF_DEPENDENCY_VIEW_UNPUBLISH_NODE_COLOR</source>
5384       <translation>非公開ノード色</translation>
5385     </message>
5386     <message>
5387       <source>PREF_DEPENDENCY_VIEW_SELECT_NODE_COLOR</source>
5388       <translation>選択ノード色</translation>
5389     </message>
5390     <message>
5391       <source>PREF_DEPENDENCY_VIEW_ARROW_COLOR</source>
5392       <translation>デフォルト矢印色</translation>
5393     </message>
5394     <message>
5395       <source>PREF_DEPENDENCY_VIEW_HIGHLIGHT_ARROW_COLOR</source>
5396       <translation>ハイライト矢印色</translation>
5397     </message>
5398     <message>
5399       <source>PREF_DEPENDENCY_VIEW_SELECT_ARROW_COLOR</source>
5400       <translation>選択矢印色</translation>
5401     </message>
5402     <message>
5403       <source>GEOM_ALL_IMPORT_FILES</source>
5404       <translation>サポートされているすべての形式 (%1)</translation>
5405     </message>
5406     <message>
5407       <source>GEOM_UNSUPPORTED_TYPE</source>
5408       <translation>ファイルの形式はサポートされていません</translation>
5409     </message>
5410     <message>
5411       <source>GEOM_UNKNOWN_IMPORT_ERROR</source>
5412       <translation>不明なエラー</translation>
5413     </message>
5414     <message>
5415       <source>GEOM_IMPORT_ERRORS</source>
5416       <translation>エラーによりインポート操作を終了します</translation>
5417     </message>
5418     <message>
5419       <source>EXPORT_IGES_HETEROGENEOUS_COMPOUND</source>
5420       <translation>このアセンブリは異なるモードでバックアップする必要がありますエンティティを含んでいるので損失なし IGES フォーマットでエクスポートできません。頂点、エッジと 1 つの側面およびシェルとソリッドから別に輪郭です。</translation>
5421     </message>
5422     <message>
5423       <source>GEOM_PUBLISH_NAMED_SHAPES</source>
5424       <translation>指定したオブジェクトのグループ(存在する場合)を作成しますか？</translation>
5425     </message>
5426     <message>
5427       <source>GEOM_PRECISION_HINT</source>
5428       <translation>パラメーターの入力値の精度を調整することは '%1' の好みにジオメトリ モジュールの。</translation>
5429     </message>
5430     <message>
5431       <source>GEOM_PLUGINS_OTHER</source>
5432       <translation>その他</translation>
5433     </message>
5434     <message>
5435       <source>SHOW_ONLY_SELECTED</source>
5436       <translation>選択範囲のみを表示</translation>
5437     </message>
5438     <message>
5439       <source>HIDE_SELECTED</source>
5440       <translation>選択オブジェクトを隠す</translation>
5441     </message>
5442     <message>
5443       <source>SHOW_ALL_SUB_SHAPES</source>
5444       <translation>すべてのサブオブジェクトを表示</translation>
5445     </message>
5446     <message>
5447       <source>TOP_SMOOTHINGSURFACE</source>
5448       <translation>表面 lissee</translation>
5449     </message>
5450     <message>
5451       <source>GEOM_SELECT_IMAGE</source>
5452       <translation>イメージの選択.</translation>
5453     </message>
5454     <message>
5455       <source>CC_PNT_ITEM_X_Y</source>
5456       <translation>X=%1, Y=%2</translation>
5457     </message>
5458     <message>
5459       <source>CC_PNT_ITEM_X_Y_Z</source>
5460       <translation>X=%1, Y=%2, Z=%3</translation>
5461     </message>
5462     <message>
5463       <source>GEOM_FILTER</source>
5464       <translation>フィルタ</translation>
5465     </message>
5466     <message>
5467       <source>GEOM_LESS_THAN</source>
5468       <translation>未満</translation>
5469     </message>
5470     <message>
5471       <source>GEOM_LESSOREQUAL_THAN</source>
5472       <translation>以下</translation>
5473     </message>
5474     <message>
5475       <source>GEOM_GREAT_THAN</source>
5476       <translation>超える</translation>
5477     </message>
5478     <message>
5479       <source>GEOM_GREATOREQUAL_THAN</source>
5480       <translation>以上</translation>
5481     </message>
5482     <message>
5483       <source>GEOM_SOME_SHAPES_SELECTED</source>
5484       <translation>%1 個選択済み</translation>
5485     </message>
5486     <message>
5487       <source>GEOM_NO_SHAPES_SELECTED</source>
5488       <translation>フィルタリングパラメータに適合する形状はありません</translation>
5489     </message>
5490     <message>
5491       <source>GEOM_HEALING_STATS_TITLE</source>
5492       <translation>行われた変更</translation>
5493     </message>
5494     <message>
5495       <source>GEOM_HEALING_STATS_COL_1</source>
5496       <translation>カウント</translation>
5497     </message>
5498     <message>
5499       <source>GEOM_HEALING_STATS_COL_2</source>
5500       <translation>修正</translation>
5501     </message>
5502     <message>
5503       <source>GEOM_PLOT_DISTRIBUTION</source>
5504       <translation>Plot</translation>
5505     </message>
5506     <message>
5507       <source>GEOM_X_AXIS</source>
5508       <translation>X軸</translation>
5509     </message>
5510     <message>
5511       <source>GEOM_Y_AXIS</source>
5512       <translation>Y軸</translation>
5513     </message>
5514     <message>
5515       <source>GEOM_Z_AXIS</source>
5516       <translation>Z軸</translation>
5517     </message>
5518     <message>
5519       <source>GEOM_DIM_AXES</source>
5520       <translation>局所座標軸に沿った次元</translation>
5521     </message>
5522     <message>
5523       <source>SHOW_ALL_BTN</source>
5524       <translation>全表示</translation>
5525     </message>
5526     <message>
5527       <source>HIDE_ALL_BTN</source>
5528       <translation>全非表示</translation>
5529     </message>
5530   </context>
5531   <context>
5532     <name>GeometryGUI</name>
5533     <message>
5534       <source>TOOL_BASIC</source>
5535       <translation>基本</translation>
5536     </message>
5537     <message>
5538       <source>TOOL_BLOCKS</source>
5539       <translation>ブロック</translation>
5540     </message>
5541     <message>
5542       <source>TOOL_BOOLEAN</source>
5543       <translation>ブーリアン演算</translation>
5544     </message>
5545     <message>
5546       <source>TOOL_FEATURES</source>
5547       <translation>修正</translation>
5548     </message>
5549     <message>
5550       <source>TOOL_GENERATION</source>
5551       <translation>作成</translation>
5552     </message>
5553     <message>
5554       <source>TOOL_PRIMITIVES</source>
5555       <translation>プリミティブ</translation>
5556     </message>
5557     <message>
5558       <source>TOOL_TRANSFORMATION</source>
5559       <translation>変形</translation>
5560     </message>
5561     <message>
5562       <source>TOOL_BUILD</source>
5563       <translation>構築</translation>
5564     </message>
5565     <message>
5566       <source>TOOL_OPERATIONS</source>
5567       <translation>操作</translation>
5568     </message>
5569     <message>
5570       <source>TOOL_PICTURES</source>
5571       <translation>画像</translation>
5572     </message>
5573     <message>
5574       <source>TOOL_ADVANCED</source>
5575       <translation>上級</translation>
5576     </message>
5577     <message>
5578       <source>TOOL_MEASURES</source>
5579       <translation>測定</translation>
5580     </message>
5581     <message>
5582       <source>TOOL_IMPORTEXPORT</source>
5583       <translation>インポート / エクスポート XAO</translation>
5584     </message>
5585   </context>
5586   <context>
5587     <name>BasicGUI_CurveDlg</name>
5588     <message>
5589       <source>GEOM_IS_CLOSED</source>
5590       <translation>閉じたエッジを構築</translation>
5591     </message>
5592     <message>
5593       <source>GEOM_BUILD_CLOSED_WIRE</source>
5594       <translation>閉じたワイヤーを構築</translation>
5595     </message>
5596     <message>
5597       <source>GEOM_IS_REORDER</source>
5598       <translation>アカウントの距離を考慮して点の順序を変更</translation>
5599     </message>
5600     <message>
5601       <source>GEOM_INTERPOL_TANGENTS</source>
5602       <translation>接線</translation>
5603     </message>
5604     <message>
5605       <source>GEOM_INTERPOL_FIRST_VEC</source>
5606       <translation>最初の接線ベクトル</translation>
5607     </message>
5608     <message>
5609       <source>GEOM_INTERPOL_LAST_VEC</source>
5610       <translation>最後の接線ベクトル</translation>
5611     </message>
5612     <message>
5613       <source>GEOM_BOTH_TANGENTS_REQUIRED</source>
5614       <translation>2 つの接線ベクトルを定義する必要があります。</translation>
5615     </message>
5616     <message>
5617       <source>GEOM_CURVE_CRMODE</source>
5618       <translation>作成モード</translation>
5619     </message>
5620     <message>
5621       <source>GEOM_CURVE_SELECTION</source>
5622       <translation>選択</translation>
5623     </message>
5624     <message>
5625       <source>GEOM_CURVE_ANALITICAL</source>
5626       <translation>解析</translation>
5627     </message>
5628   </context>
5629   <context>
5630     <name>BasicGUI_ParamCurveWidget</name>
5631     <message>
5632       <source>GEOM_PCURVE_TITLE</source>
5633       <translation>曲線のパラメーター</translation>
5634     </message>
5635     <message>
5636       <source>GEOM_PCURVE_X</source>
5637       <translation>方程式 X(t)</translation>
5638     </message>
5639     <message>
5640       <source>GEOM_PCURVE_Y</source>
5641       <translation>方程式 Y(t)</translation>
5642     </message>
5643     <message>
5644       <source>GEOM_PCURVE_Z</source>
5645       <translation>方程式 Z(t)</translation>
5646     </message>
5647     <message>
5648       <source>GEOM_PCURVE_MIN</source>
5649       <translation>最小 t</translation>
5650     </message>
5651     <message>
5652       <source>GEOM_PCURVE_MAX</source>
5653       <translation>最大 t</translation>
5654     </message>
5655     <message>
5656       <source>GEOM_PCURVE_STEP</source>
5657       <translation>ステップ</translation>
5658     </message>
5659     <message>
5660       <source>GEOM_PCURVE_NBSTEP</source>
5661       <translation>ステップ数</translation>
5662     </message>
5663   </context>
5664   <context>
5665     <name>BasicGUI_EllipseDlg</name>
5666     <message>
5667       <source>GEOM_VECTOR_MAJOR</source>
5668       <translation>主要な軸</translation>
5669     </message>
5670     <message>
5671       <source>ORIGIN_DEFAULT</source>
5672       <translation>デフォルトで原点</translation>
5673     </message>
5674     <message>
5675       <source>X_AXIS_DEFAULT</source>
5676       <translation>デフォルトでX軸</translation>
5677     </message>
5678     <message>
5679       <source>Z_AXIS_DEFAULT</source>
5680       <translation>デフォルトでZ軸</translation>
5681     </message>
5682   </context>
5683   <context>
5684     <name>BasicGUI_MarkerDlg</name>
5685     <message>
5686       <source>CAPTION</source>
5687       <translation>ローカル座標系の作成</translation>
5688     </message>
5689     <message>
5690       <source>DX</source>
5691       <translation>Dx</translation>
5692     </message>
5693     <message>
5694       <source>DY</source>
5695       <translation>Dy</translation>
5696     </message>
5697     <message>
5698       <source>DZ</source>
5699       <translation>Dz</translation>
5700     </message>
5701     <message>
5702       <source>LCS_NAME</source>
5703       <translation>LocalCS</translation>
5704     </message>
5705     <message>
5706       <source>LOCALCS</source>
5707       <translation>ローカル座標系</translation>
5708     </message>
5709     <message>
5710       <source>ORIGIN</source>
5711       <translation>原点の座標</translation>
5712     </message>
5713     <message>
5714       <source>VEC_PARALLEL</source>
5715       <translation>座標系の軸が平行でなければなりません</translation>
5716     </message>
5717     <message>
5718       <source>XDIR</source>
5719       <translation>X 軸の方向</translation>
5720     </message>
5721     <message>
5722       <source>YDIR</source>
5723       <translation>Y 軸の方向</translation>
5724     </message>
5725   </context>
5726   <context>
5727     <name>BlocksGUI_BlockDlg</name>
5728     <message>
5729       <source>FACE_1</source>
5730       <translation>フェース 1</translation>
5731     </message>
5732     <message>
5733       <source>FACE_2</source>
5734       <translation>フェース 2</translation>
5735     </message>
5736     <message>
5737       <source>FACE_3</source>
5738       <translation>フェース 3</translation>
5739     </message>
5740     <message>
5741       <source>FACE_4</source>
5742       <translation>フェース 4</translation>
5743     </message>
5744     <message>
5745       <source>FACE_5</source>
5746       <translation>フェース 5</translation>
5747     </message>
5748     <message>
5749       <source>FACE_6</source>
5750       <translation>フェース 6</translation>
5751     </message>
5752   </context>
5753   <context>
5754     <name>BlocksGUI_ExplodeDlg</name>
5755     <message>
5756       <source>NB_FACES_MAX</source>
5757       <translation>面の最大数</translation>
5758     </message>
5759     <message>
5760       <source>NB_FACES_MIN</source>
5761       <translation>面の最大数</translation>
5762     </message>
5763   </context>
5764   <context>
5765     <name>BlocksGUI_QuadFaceDlg</name>
5766     <message>
5767       <source>EDGE_1</source>
5768       <translation>エッジ 1</translation>
5769     </message>
5770     <message>
5771       <source>EDGE_2</source>
5772       <translation>エッジ 2</translation>
5773     </message>
5774     <message>
5775       <source>EDGE_3</source>
5776       <translation>エッジ 3</translation>
5777     </message>
5778     <message>
5779       <source>EDGE_4</source>
5780       <translation>エッジ 4</translation>
5781     </message>
5782     <message>
5783       <source>VERTEX_1</source>
5784       <translation>ポイント 1</translation>
5785     </message>
5786     <message>
5787       <source>VERTEX_2</source>
5788       <translation>ポイント 2</translation>
5789     </message>
5790     <message>
5791       <source>VERTEX_3</source>
5792       <translation>ポイント 3</translation>
5793     </message>
5794     <message>
5795       <source>VERTEX_4</source>
5796       <translation>ポイント 4</translation>
5797     </message>
5798   </context>
5799   <context>
5800     <name>BlocksGUI_TrsfDlg</name>
5801     <message>
5802       <source>FACE_1</source>
5803       <translation>フェース 1</translation>
5804     </message>
5805     <message>
5806       <source>FACE_1U</source>
5807       <translation>フェース 1 U</translation>
5808     </message>
5809     <message>
5810       <source>FACE_1V</source>
5811       <translation>フェース 1 V</translation>
5812     </message>
5813     <message>
5814       <source>FACE_2</source>
5815       <translation>フェース 2</translation>
5816     </message>
5817     <message>
5818       <source>FACE_2U</source>
5819       <translation>フェース 2 U</translation>
5820     </message>
5821     <message>
5822       <source>FACE_2V</source>
5823       <translation>フェース 2 V</translation>
5824     </message>
5825   </context>
5826   <context>
5827     <name>CurveCreator_NewSectionDlg</name>
5828     <message>
5829       <source>SECTION_NAME</source>
5830       <translation>名前</translation>
5831     </message>
5832     <message>
5833       <source>SECTION_LINE_TYPE</source>
5834       <translation>タイプ</translation>
5835     </message>
5836     <message>
5837       <source>SECTION_POLYLINE_TYPE</source>
5838       <translation>ポリライン</translation>
5839     </message>
5840     <message>
5841       <source>SECTION_SPLINE_TYPE</source>
5842       <translation>スプライン</translation>
5843     </message>
5844     <message>
5845       <source>SECTION_LINE_CLOSED</source>
5846       <translation>閉じたライン</translation>
5847     </message>
5848     <message>
5849       <source>SECTION_ADD_BTN</source>
5850       <translation>追加</translation>
5851     </message>
5852     <message>
5853       <source>SECTION_OK_BTN</source>
5854       <translation>Ok</translation>
5855     </message>
5856     <message>
5857       <source>SECTION_CANCEL_BTN</source>
5858       <translation>キャンセル</translation>
5859     </message>
5860     <message>
5861       <source>ADD_NEW_SECTION</source>
5862       <translation>新しい断面の追加</translation>
5863     </message>
5864     <message>
5865       <source>SET_SECTION_PARAMETERS</source>
5866       <translation>断面パラメータの設定</translation>
5867     </message>
5868   </context>
5869   <context>
5870     <name>CurveCreator_TreeViewModel</name>
5871     <message>
5872       <source>X=%1, Y=%2</source>
5873       <translation>X=%1, Y=%2</translation>
5874     </message>
5875     <message>
5876       <source>X=%1, Y=%2, Z=%3</source>
5877       <translation>X=%1, Y=%2, Z=%3</translation>
5878     </message>
5879   </context>
5880   <context>
5881     <name>CurveCreator_TableView</name>
5882     <message>
5883       <source>TABLE_SECTION</source>
5884       <translation>Section</translation>
5885     </message>
5886     <message>
5887       <source>TABLE_INDEX</source>
5888       <translation>Index</translation>
5889     </message>
5890     <message>
5891       <source>TABLE_X</source>
5892       <translation>X</translation>
5893     </message>
5894     <message>
5895       <source>TABLE_Y</source>
5896       <translation>Y</translation>
5897     </message>
5898     <message>
5899       <source>DISTANCE_PREV</source>
5900       <translation>距離</translation>
5901     </message>
5902   </context>
5903   <context>
5904     <name>CurveCreator_Widget</name>
5905     <message>
5906       <source>SECTION_GROUP_TITLE</source>
5907       <translation>断面</translation>
5908     </message>
5909     <message>
5910       <source>UNDO</source>
5911       <translation>元に戻す</translation>
5912     </message>
5913     <message>
5914       <source>UNDO_TLT</source>
5915       <translation>元に戻す</translation>
5916     </message>
5917     <message>
5918       <source>REDO</source>
5919       <translation>前に進む</translation>
5920     </message>
5921     <message>
5922       <source>REDO_TLT</source>
5923       <translation>前に進む</translation>
5924     </message>
5925     <message>
5926       <source>NEW_SECTION</source>
5927       <translation>新しい断面</translation>
5928     </message>
5929     <message>
5930       <source>NEW_SECTION_TLT</source>
5931       <translation>新しい断面の挿入</translation>
5932     </message>
5933     <message>
5934       <source>ADDITION_MODE</source>
5935       <translation>追加モード</translation>
5936     </message>
5937     <message>
5938       <source>ADDITION_MODE_TLT</source>
5939       <translation>追加モード</translation>
5940     </message>
5941     <message>
5942       <source>MODIFICATION_MODE</source>
5943       <translation>修正モード</translation>
5944     </message>
5945     <message>
5946       <source>MODIFICATION_MODE_TLT</source>
5947       <translation>修正モード</translation>
5948     </message>
5949     <message>
5950       <source>DETECTION_MODE</source>
5951       <translation>検出モード</translation>
5952     </message>
5953     <message>
5954       <source>DETECTION_MODE_TLT</source>
5955       <translation>検出モード</translation>
5956     </message>
5957     <message>
5958       <source>CLOSE_SECTIONS</source>
5959       <translation>断面を閉じる</translation>
5960     </message>
5961     <message>
5962       <source>CLOSE_SECTIONS_TLT</source>
5963       <translation>断面を閉じる</translation>
5964     </message>
5965     <message>
5966       <source>UNCLOSE_SECTIONS</source>
5967       <translation>断面を開く</translation>
5968     </message>
5969     <message>
5970       <source>UNCLOSE_SECTIONS_TLT</source>
5971       <translation>選択した断面を開く</translation>
5972     </message>
5973     <message>
5974       <source>SET_SECTIONS_POLYLINE</source>
5975       <translation>断面のポリラインを設定</translation>
5976     </message>
5977     <message>
5978       <source>SET_SECTIONS_POLYLINE_TLT</source>
5979       <translation>断面のポリラインを設定</translation>
5980     </message>
5981     <message>
5982       <source>SET_SECTIONS_SPLINE</source>
5983       <translation>断面のスプラインを設定</translation>
5984     </message>
5985     <message>
5986       <source>SET_SECTIONS_SPLINE_TLT</source>
5987       <translation>選択した断面をスプラインに設定</translation>
5988     </message>
5989     <message>
5990       <source>REMOVE</source>
5991       <translation>削除</translation>
5992     </message>
5993     <message>
5994       <source>REMOVE_TLT</source>
5995       <translation>削除</translation>
5996     </message>
5997     <message>
5998       <source>JOIN</source>
5999       <translation>結合</translation>
6000     </message>
6001     <message>
6002       <source>JOIN_TLT</source>
6003       <translation>選択した断面を結合</translation>
6004     </message>
6005     <message>
6006       <source>BRING_TOGETHER</source>
6007       <translation>まとめる</translation>
6008     </message>
6009     <message>
6010       <source>BRING_TOGETHER_TLT</source>
6011       <translation>２個のセクション先端点をまとめる</translation>
6012     </message>
6013     <message>
6014       <source>CLEAR_ALL</source>
6015       <translation>すべて消去</translation>
6016     </message>
6017     <message>
6018       <source>CLEAR_ALL_TLT</source>
6019       <translation>すべてのオブジェクトを削除</translation>
6020     </message>
6021     <message>
6022       <source>JOIN_ALL</source>
6023       <translation>すべての断面を結合</translation>
6024     </message>
6025     <message>
6026       <source>JOIN_ALL_TLT</source>
6027       <translation>すべての断面を結合</translation>
6028     </message>
6029   </context>
6030   <context>
6031     <name>EntityGUI_PolylineDlg</name>
6032     <message>
6033       <source>POLYLINE_DLG_TITLE</source>
6034       <translation>ポリラインの構築</translation>
6035     </message>
6036     <message>
6037       <source>POLYLINE_TITLE</source>
6038       <translation>ポリライン</translation>
6039     </message>
6040     <message>
6041       <source>POLYLINE_NAME</source>
6042       <translation>Polyline</translation>
6043     </message>
6044     <message>
6045       <source>POLYLINE_IMPORT</source>
6046       <translation>ポリラインのインポート</translation>
6047     </message>
6048     <message>
6049       <source>POLYLINE_ADD_SECTION</source>
6050       <translation>断面の追加</translation>
6051     </message>
6052     <message>
6053       <source>POLYLINE_EDIT_SECTION</source>
6054       <translation>断面の編集</translation>
6055     </message>
6056   </context>
6057   <context>
6058     <name>EntityGUI_SketcherDlg</name>
6059     <message>
6060       <source>CANNOT_CLOSE</source>
6061       <translation>閉じるには、アウトライン番号のポイントは十分ではないことはできません。</translation>
6062     </message>
6063   </context>
6064   <context>
6065     <name>EntityGUI_FeatureDetectorDlg</name>
6066     <message>
6067       <source>GEOM_DETECT_TITLE</source>
6068       <translation>角度を検出します。</translation>
6069     </message>
6070     <message>
6071       <source>GEOM_SCALING</source>
6072       <translation>スケーリング</translation>
6073     </message>
6074     <message>
6075       <source>GEOM_PNT1</source>
6076       <translation>左上隅</translation>
6077     </message>
6078     <message>
6079       <source>GEOM_PNT2</source>
6080       <translation>右上隅</translation>
6081     </message>
6082     <message>
6083       <source>GEOM_CORNER</source>
6084       <translation>Angles_detectes</translation>
6085     </message>
6086     <message>
6087       <source>GEOM_CORNERS</source>
6088       <translation>角度</translation>
6089     </message>
6090     <message>
6091       <source>GEOM_CONTOURS</source>
6092       <translation>Wires</translation>
6093     </message>
6094     <message>
6095       <source>GEOM_FEATURES</source>
6096       <translation>特性</translation>
6097     </message>
6098     <message>
6099       <source>GEOM_DETECT_ZONE</source>
6100       <translation>検出ゾーン (すべての既定のイメージ) を選択します</translation>
6101     </message>
6102     <message>
6103       <source>GEOM_DETECT_OUTPUT</source>
6104       <translation>出力の種類</translation>
6105     </message>
6106     <message>
6107       <source>GEOM_PICTURE</source>
6108       <translation>Picture</translation>
6109     </message>
6110     <message>
6111       <source>GEOM_COLOR_FILTER</source>
6112       <translation>フィルター</translation>
6113     </message>
6114     <message>
6115       <source>GEOM_VIEW</source>
6116       <translation>ビュー</translation>
6117     </message>
6118     <message>
6119       <source>GEOM_FRONT</source>
6120       <translation>顔 （Y ・ Z）</translation>
6121     </message>
6122     <message>
6123       <source>GEOM_TOP</source>
6124       <translation>トップ （X ・ Y）</translation>
6125     </message>
6126     <message>
6127       <source>GEOM_LEFT</source>
6128       <translation>左 (X - Z)</translation>
6129     </message>
6130     <message>
6131       <source>USE_ROI</source>
6132       <translation>希望の領域を使用</translation>
6133     </message>
6134     <message>
6135       <source>KERNEL_SIZE</source>
6136       <translation>カーネルサイズ</translation>
6137     </message>
6138     <message>
6139       <source>QUALITY_LEVEL</source>
6140       <translation>クオリティレベル</translation>
6141     </message>
6142     <message>
6143       <source>MIN_DISTANCE</source>
6144       <translation>最短距離</translation>
6145     </message>
6146     <message>
6147       <source>TYPE_CRITERIA</source>
6148       <translation>タイプの基準</translation>
6149     </message>
6150     <message>
6151       <source>CV_TERMCRIT_ITER</source>
6152       <translation>イタレーションの最大数</translation>
6153     </message>
6154     <message>
6155       <source>CV_TERMCRIT_EPS</source>
6156       <translation>許容範囲</translation>
6157     </message>
6158     <message>
6159       <source>CV_TERMCRIT_ITER | CV_TERMCRIT_EPS</source>
6160       <translation>イタレーションまたは許容範囲の最大数</translation>
6161     </message>
6162     <message>
6163       <source>MAX_ITER</source>
6164       <translation>最大イタレーション</translation>
6165     </message>
6166     <message>
6167       <source>EPSILON</source>
6168       <translation>許容範囲</translation>
6169     </message>
6170     <message>
6171       <source>L2GRADIENT</source>
6172       <translation>L2 gradient</translation>
6173     </message>
6174     <message>
6175       <source>LOWTHRESHOLD</source>
6176       <translation>低しきい値</translation>
6177     </message>
6178     <message>
6179       <source>RATIO</source>
6180       <translation>比</translation>
6181     </message>
6182     <message>
6183       <source>SMOOTH_SIZE</source>
6184       <translation>平滑サイズ</translation>
6185     </message>
6186     <message>
6187       <source>HBINS</source>
6188       <translation>Hbins</translation>
6189     </message>
6190     <message>
6191       <source>SBINS</source>
6192       <translation>Sbins</translation>
6193     </message>
6194     <message>
6195       <source>HIST_TYPE</source>
6196       <translation>ヒストグラムのタイプ</translation>
6197     </message>
6198     <message>
6199       <source>CV_HIST_ARRAY</source>
6200       <translation>多次元高密度配列</translation>
6201     </message>
6202     <message>
6203       <source>CV_HIST_SPARSE</source>
6204       <translation>多次元スパース配列</translation>
6205     </message>
6206     <message>
6207       <source>THRESHOLD_VALUE</source>
6208       <translation>しきい値</translation>
6209     </message>
6210     <message>
6211       <source>MAX_THRESHOLD</source>
6212       <translation>最大しきい値</translation>
6213     </message>
6214     <message>
6215       <source>FIND_CONTOURS_METHOD</source>
6216       <translation>輪郭取得法</translation>
6217     </message>
6218     <message>
6219       <source>CV_CHAIN_APPROX_NONE</source>
6220       <translation>チェーン近似がない</translation>
6221     </message>
6222     <message>
6223       <source>CV_CHAIN_APPROX_SIMPLE</source>
6224       <translation>チェーン近似はSimple</translation>
6225     </message>
6226     <message>
6227       <source>CV_CHAIN_APPROX_TC89_KCOS</source>
6228       <translation>チェーン近似はTC90 KCOS</translation>
6229     </message>
6230     <message>
6231       <source>CV_CHAIN_APPROX_TC89_L1</source>
6232       <translation>チェーン近似はTC90 L1</translation>
6233     </message>
6234   </context>
6235   <context>
6236     <name>EntityGUI_PictureImportDlg</name>
6237     <message>
6238       <source>GEOM_PICTURE</source>
6239       <translation>Picture</translation>
6240     </message>
6241     <message>
6242       <source>GEOM_FILE</source>
6243       <translation>ファイルの名前</translation>
6244     </message>
6245     <message>
6246       <source>GEOM_IMPORT_PICT_TITLE</source>
6247       <translation>ビューアーにイメージをインポート</translation>
6248     </message>
6249   </context>
6250   <context>
6251     <name>EntityGUI_SubShapeDlg</name>
6252     <message>
6253       <source>NO_SUBSHAPES_SELECTED</source>
6254       <translation>1つまたは複数のサブオブジェクトを選択してください</translation>
6255     </message>
6256   </context>
6257   <context>
6258     <name>GenerationGUI_PrismDlg</name>
6259     <message>
6260       <source>GEOM_THICKENING</source>
6261       <translation>Epaississement</translation>
6262     </message>
6263     <message>
6264       <source>GEOM_ADD_THICKNESS</source>
6265       <translation>厚み追加（エッジまたはワイヤーのみ）</translation>
6266     </message>
6267   </context>
6268   <context>
6269     <name>GroupGUI</name>
6270     <message>
6271       <source>NO_GROUP</source>
6272       <translation>編集するグループを選択してください</translation>
6273     </message>
6274   </context>
6275   <context>
6276     <name>GroupGUI_BooleanDlg</name>
6277     <message>
6278       <source>GEOM_UNION</source>
6279       <translation>Union</translation>
6280     </message>
6281     <message>
6282       <source>GEOM_UNION_TITLE</source>
6283       <translation>グループの連合</translation>
6284     </message>
6285     <message>
6286       <source>GEOM_INTERSECT</source>
6287       <translation>Intersect</translation>
6288     </message>
6289     <message>
6290       <source>GEOM_INTERSECT_TITLE</source>
6291       <translation>グループの共有領域</translation>
6292     </message>
6293     <message>
6294       <source>GEOM_CUT</source>
6295       <translation>Cut</translation>
6296     </message>
6297     <message>
6298       <source>GEOM_CUT_TITLE</source>
6299       <translation>切断グループ</translation>
6300     </message>
6301     <message>
6302       <source>GEOM_GROUPS</source>
6303       <translation>グループ</translation>
6304     </message>
6305     <message>
6306       <source>GEOM_MAIN_GROUPS</source>
6307       <translation>メイングループ</translation>
6308     </message>
6309     <message>
6310       <source>GEOM_TOOL_GROUPS</source>
6311       <translation>ツール グループ</translation>
6312     </message>
6313   </context>
6314   <context>
6315     <name>GroupGUI_GroupDlg</name>
6316     <message>
6317       <source>ADD</source>
6318       <translation>追加</translation>
6319     </message>
6320     <message>
6321       <source>CREATE_GROUP_TITLE</source>
6322       <translation>グループを作成</translation>
6323     </message>
6324     <message>
6325       <source>EDIT_GROUP_TITLE</source>
6326       <translation>グループを編集</translation>
6327     </message>
6328     <message>
6329       <source>EMPTY_LIST</source>
6330       <translation>グループ内に配置するには、1 つまたは複数のサブオブジェクトを選択します。</translation>
6331     </message>
6332     <message>
6333       <source>EMPTY_NAME</source>
6334       <translation>グループ名が空です。有効な名前を指定します。</translation>
6335     </message>
6336     <message>
6337       <source>GROUP_NAME</source>
6338       <translation>グループの名前</translation>
6339     </message>
6340     <message>
6341       <source>GROUP_PREFIX</source>
6342       <translation>Group</translation>
6343     </message>
6344     <message>
6345       <source>MAIN_SHAPE</source>
6346       <translation>メイン オブジェクト</translation>
6347     </message>
6348     <message>
6349       <source>MAIN_SUB_SHAPES</source>
6350       <translation>メインオブジェクトおよびサブオブジェクト</translation>
6351     </message>
6352     <message>
6353       <source>NO_GROUP</source>
6354       <translation>編集するグループを選択してください</translation>
6355     </message>
6356     <message>
6357       <source>NO_MAIN_OBJ</source>
6358       <translation>メインオブジェクトを選択してください</translation>
6359     </message>
6360     <message>
6361       <source>REMOVE</source>
6362       <translation>削除</translation>
6363     </message>
6364     <message>
6365       <source>SELECT_ALL</source>
6366       <translation>全選択</translation>
6367     </message>
6368     <message>
6369       <source>SHAPE_SEL_RESTR</source>
6370       <translation>メインオブジェクト選択の制限</translation>
6371     </message>
6372     <message>
6373       <source>SHAPE_TYPE</source>
6374       <translation>オブジェクトの種類</translation>
6375     </message>
6376     <message>
6377       <source>NO_RESTR</source>
6378       <translation>制限なし</translation>
6379     </message>
6380     <message>
6381       <source>GEOM_PARTS_OF_SHAPE2</source>
6382       <translation>セカンダリオブジェクトのジオメトリパーツ</translation>
6383     </message>
6384     <message>
6385       <source>SUBSHAPES_OF_SHAPE2</source>
6386       <translation>セカンダリオブジェクトのサブオブジェクトのみ</translation>
6387     </message>
6388     <message>
6389       <source>SECOND_SHAPE</source>
6390       <translation>セカンダリ オブジェクト</translation>
6391     </message>
6392     <message>
6393       <source>WRN_NOT_SUBSHAPE</source>
6394       <translation>選択した図形は、主要な図形のサブ図形ではありません。適切な選択については、ビューアー内のすべての余分な図形を非表示します。</translation>
6395     </message>
6396   </context>
6397   <context>
6398     <name>EntityGUI</name>
6399     <message>
6400       <source>NO_FIELD</source>
6401       <translation>編集するフィールドを選択してください。</translation>
6402     </message>
6403   </context>
6404   <context>
6405     <name>EntityGUI_FieldDlg</name>
6406     <message>
6407       <source>CREATE_FIELD_TITLE</source>
6408       <translation>フィールドを作成します。</translation>
6409     </message>
6410     <message>
6411       <source>EDIT_FIELD_TITLE</source>
6412       <translation>フィールドを編集します。</translation>
6413     </message>
6414     <message>
6415       <source>FIELD_NAME</source>
6416       <translation>フィールド名</translation>
6417     </message>
6418     <message>
6419       <source>PROPERTIES</source>
6420       <translation>オブジェクト インスペクター</translation>
6421     </message>
6422     <message>
6423       <source>SHAPE</source>
6424       <translation>オブジェクト</translation>
6425     </message>
6426     <message>
6427       <source>DATA_TYPE</source>
6428       <translation>タイプ</translation>
6429     </message>
6430     <message>
6431       <source>BOOL</source>
6432       <translation>ブーリアン</translation>
6433     </message>
6434     <message>
6435       <source>INT</source>
6436       <translation>整数</translation>
6437     </message>
6438     <message>
6439       <source>DOUBLE</source>
6440       <translation>ダブル</translation>
6441     </message>
6442     <message>
6443       <source>STRING</source>
6444       <translation>文字列</translation>
6445     </message>
6446     <message>
6447       <source>SHAPE_TYPE</source>
6448       <translation>SubShape</translation>
6449     </message>
6450     <message>
6451       <source>VERTEX</source>
6452       <translation>基準点</translation>
6453     </message>
6454     <message>
6455       <source>EDGE</source>
6456       <translation>Edge</translation>
6457     </message>
6458     <message>
6459       <source>FACE</source>
6460       <translation>Face</translation>
6461     </message>
6462     <message>
6463       <source>SOLID</source>
6464       <translation>ソリッド</translation>
6465     </message>
6466     <message>
6467       <source>WHOLE</source>
6468       <translation>図形全体</translation>
6469     </message>
6470     <message>
6471       <source>NB_COMPS</source>
6472       <translation>注意コンポーネント</translation>
6473     </message>
6474     <message>
6475       <source>VALUES</source>
6476       <translation>値</translation>
6477     </message>
6478     <message>
6479       <source>PREV_STEP</source>
6480       <translation>前の手順</translation>
6481     </message>
6482     <message>
6483       <source>STEP</source>
6484       <translation>ステップ</translation>
6485     </message>
6486     <message>
6487       <source>NEXT_STEP</source>
6488       <translation>次のステップ</translation>
6489     </message>
6490     <message>
6491       <source>ADD_STEP</source>
6492       <translation>ステップを追加します。</translation>
6493     </message>
6494     <message>
6495       <source>STAMP</source>
6496       <translation>スタンプ</translation>
6497     </message>
6498     <message>
6499       <source>REMOVE_STEP</source>
6500       <translation>ステップを削除します。</translation>
6501     </message>
6502     <message>
6503       <source>FIELD_PREFIX</source>
6504       <translation>フィールド:</translation>
6505     </message>
6506     <message>
6507       <source>GEOM_NO_STUDY</source>
6508       <translation>ない研究桁</translation>
6509     </message>
6510     <message>
6511       <source>NO_SHAPE</source>
6512       <translation>図形が選択されていません</translation>
6513     </message>
6514     <message>
6515       <source>NO_FIELD</source>
6516       <translation>選択されていないフィールド</translation>
6517     </message>
6518     <message>
6519       <source>EMPTY_NAME</source>
6520       <translation>空でないフィールド名を指定してください。</translation>
6521     </message>
6522     <message>
6523       <source>NO_VALUES</source>
6524       <translation>フィールドに追加手順なし</translation>
6525     </message>
6526     <message>
6527       <source>SUB_SHAPE_HEADER</source>
6528       <translation>SubShape</translation>
6529     </message>
6530     <message>
6531       <source>WHOLE_SHAPE_VHEADER</source>
6532       <translation>オブジェクト</translation>
6533     </message>
6534     <message>
6535       <source>RENAME_COMPONENT</source>
6536       <translation>コンポーネントの名前変更</translation>
6537     </message>
6538     <message>
6539       <source>COMPONENT_NAME</source>
6540       <translation>コンポーネント名</translation>
6541     </message>
6542     <message>
6543       <source>WRN_NOT_SUBSHAPE</source>
6544       <translation>選択した形状は主要な図形のサブ図形ではありません。適切な選択については、ビューアー内のすべての余分な図形を非表示します。</translation>
6545     </message>
6546     <message>
6547       <source>ERR_STEP_EXISTS</source>
6548       <translation>そのIDのステップはすでに存在します。</translation>
6549     </message>
6550   </context>
6551   <context>
6552     <name>MeasureGUI_1Sel1TextView1Check_QTD</name>
6553     <message>
6554       <source>CHECK_SHAPE_GEOMETRY</source>
6555       <translation>ジオメトリもチェック</translation>
6556     </message>
6557   </context>
6558   <context>
6559     <name>MeasureGUI_PointDlg</name>
6560     <message>
6561       <source>CAPTION</source>
6562       <translation>軸に目盛り付け</translation>
6563     </message>
6564     <message>
6565       <source>COORDINATES</source>
6566       <translation>ポイントとその座標</translation>
6567     </message>
6568     <message>
6569       <source>POINT</source>
6570       <translation>基準点</translation>
6571     </message>
6572     <message>
6573       <source>X</source>
6574       <translation>X</translation>
6575     </message>
6576     <message>
6577       <source>Y</source>
6578       <translation>Y</translation>
6579     </message>
6580     <message>
6581       <source>Z</source>
6582       <translation>Z</translation>
6583     </message>
6584   </context>
6585   <context>
6586     <name>MeasureGUI_ManageDimensionsDlg</name>
6587     <message>
6588       <source>MANAGE_DIMENSIONS_TITLE</source>
6589       <translation>寸法管理</translation>
6590     </message>
6591     <message>
6592       <source>OBJECT_LABEL</source>
6593       <translation>オブジェクト</translation>
6594     </message>
6595     <message>
6596       <source>DIMENSIONS_GROUP</source>
6597       <translation>ディメンジョン</translation>
6598     </message>
6599     <message>
6600       <source>ADD_BTN</source>
6601       <translation>追加</translation>
6602     </message>
6603     <message>
6604       <source>REMOVE_BTN</source>
6605       <translation>削除</translation>
6606     </message>
6607     <message>
6608       <source>DISTANCE_ITEM</source>
6609       <translation>距離</translation>
6610     </message>
6611     <message>
6612       <source>DIAMETER_ITEM</source>
6613       <translation>直径</translation>
6614     </message>
6615     <message>
6616       <source>ANGLE_ITEM</source>
6617       <translation>角</translation>
6618     </message>
6619     <message>
6620       <source>WRN_TITLE_UNSAVED</source>
6621       <translation>保存されていない変更</translation>
6622     </message>
6623     <message>
6624       <source>WRN_MSG_CHANGES_LOST</source>
6625       <translation>保存されていない変更は失われます．続行しますか？</translation>
6626     </message>
6627     <message>
6628       <source>WRN_MSG_CHANGES_SAVE</source>
6629       <translation>保存していない変更は失われます．それらを保存したいですか？</translation>
6630     </message>
6631     <message>
6632       <source>WRN_MSG_UNSAVED</source>
6633       <translation>保存していない変更は失われます．続行しますか？</translation>
6634     </message>
6635   </context>
6636   <context>
6637     <name>MeasureGUI_CreateDimensionDlg</name>
6638     <message>
6639       <source>CREATE_DIMENSION_TITLE</source>
6640       <translation>寸法の追加</translation>
6641     </message>
6642     <message>
6643       <source>DIMENSIONS</source>
6644       <translation>ディメンジョン</translation>
6645     </message>
6646     <message>
6647       <source>LENGTH</source>
6648       <translation>長さ</translation>
6649     </message>
6650     <message>
6651       <source>DIAMETER</source>
6652       <translation>直径</translation>
6653     </message>
6654     <message>
6655       <source>ANGLE</source>
6656       <translation>角度</translation>
6657     </message>
6658     <message>
6659       <source>ARGUMENTS</source>
6660       <translation>引数</translation>
6661     </message>
6662     <message>
6663       <source>EDGE_LENGTH</source>
6664       <translation>エッジ長</translation>
6665     </message>
6666     <message>
6667       <source>TWO_POINTS</source>
6668       <translation>2点</translation>
6669     </message>
6670     <message>
6671       <source>PARALLEL_EDGES</source>
6672       <translation>平行エッジ</translation>
6673     </message>
6674     <message>
6675       <source>TWO_EDGES</source>
6676       <translation>２本のエッジ</translation>
6677     </message>
6678     <message>
6679       <source>THREE_POINTS</source>
6680       <translation>3点</translation>
6681     </message>
6682     <message>
6683       <source>EDGE</source>
6684       <translation>エッジ</translation>
6685     </message>
6686     <message>
6687       <source>EDGE_1</source>
6688       <translation>エッジ 1</translation>
6689     </message>
6690     <message>
6691       <source>EDGE_2</source>
6692       <translation>エッジ 2</translation>
6693     </message>
6694     <message>
6695       <source>POINT_1</source>
6696       <translation>点 1</translation>
6697     </message>
6698     <message>
6699       <source>POINT_2</source>
6700       <translation>点 2</translation>
6701     </message>
6702     <message>
6703       <source>POINT_3</source>
6704       <translation>点 3</translation>
6705     </message>
6706     <message>
6707       <source>OBJECT</source>
6708       <translation>オブジェクト</translation>
6709     </message>
6710     <message>
6711       <source>NAME_LENGTH</source>
6712       <translation>長さ</translation>
6713     </message>
6714     <message>
6715       <source>NAME_DIAMETER</source>
6716       <translation>直径</translation>
6717     </message>
6718     <message>
6719       <source>NAME_ANGLE</source>
6720       <translation>角</translation>
6721     </message>
6722     <message>
6723       <source>WARNING_TITLE_CANNOT_CREATE_DIMENSION</source>
6724       <translation>ディメンジョンを作成できない</translation>
6725     </message>
6726     <message>
6727       <source>WARNING_MSG_INVALID_ARGUMENTS</source>
6728       <translation>寸法は具体的に明記された引数のために作られることは不可能です．適した引数を明記してください．</translation>
6729     </message>
6730   </context>
6731   <context>
6732     <name>MeasureGUI_CheckShapeDlg</name>
6733     <message>
6734       <source>GEOM_CHECK_TITLE</source>
6735       <translation>形状情報の確認</translation>
6736     </message>
6737     <message>
6738       <source>GEOM_CHECK_SHAPE</source>
6739       <translation>形状確認</translation>
6740     </message>
6741     <message>
6742       <source>GEOM_CHECK_SHAPE_NAME</source>
6743       <translation>欠陥のある</translation>
6744     </message>
6745     <message>
6746       <source>GEOM_CHECK_SHAPE_VALID</source>
6747       <translation>この形は有効であると思われる</translation>
6748     </message>
6749     <message>
6750       <source>GEOM_CHECK_SHAPE_NOT_VALID</source>
6751       <translation>この形にエラーがある :</translation>
6752     </message>
6753     <message>
6754       <source>CHECK_ERROR_INVALID_POINT_ON_CURVE</source>
6755       <translation>曲線上の無効点</translation>
6756     </message>
6757     <message>
6758       <source>CHECK_ERROR_INVALID_POINT_ON_CURVE_ON_SURFACE</source>
6759       <translation>面上のカーブの上にある無効な点</translation>
6760     </message>
6761     <message>
6762       <source>CHECK_ERROR_INVALID_POINT_ON_SURFACE</source>
6763       <translation>面上の無効な点</translation>
6764     </message>
6765     <message>
6766       <source>CHECK_ERROR_NO_3D_CURVE</source>
6767       <translation>3Dカーブはない</translation>
6768     </message>
6769     <message>
6770       <source>CHECK_ERROR_MULTIPLE_3D_CURVE</source>
6771       <translation>多重の3Dカーブ</translation>
6772     </message>
6773     <message>
6774       <source>CHECK_ERROR_INVALID_3D_CURVE</source>
6775       <translation>無効な3Dカーブ</translation>
6776     </message>
6777     <message>
6778       <source>CHECK_ERROR_NO_CURVE_ON_SURFACE</source>
6779       <translation>無効な面上のカーブ</translation>
6780     </message>
6781     <message>
6782       <source>CHECK_ERROR_INVALID_CURVE_ON_SURFACE</source>
6783       <translation>面上の無効なカーブ</translation>
6784     </message>
6785     <message>
6786       <source>CHECK_ERROR_INVALID_CURVE_ON_CLOSED_SURFACE</source>
6787       <translation>閉じた面上の無効なカーブ</translation>
6788     </message>
6789     <message>
6790       <source>CHECK_ERROR_INVALID_SAME_RANGE_FLAG</source>
6791       <translation>無効な同じ領域のフラグ</translation>
6792     </message>
6793     <message>
6794       <source>CHECK_ERROR_INVALID_SAME_PARAMETER_FLAG</source>
6795       <translation>無効な同じパラメータフラグ</translation>
6796     </message>
6797     <message>
6798       <source>CHECK_ERROR_INVALID_DEGENERATED_FLAG</source>
6799       <translation>無効な縮退フラグ</translation>
6800     </message>
6801     <message>
6802       <source>CHECK_ERROR_FREE_EDGE</source>
6803       <translation>フリーエッジ</translation>
6804     </message>
6805     <message>
6806       <source>CHECK_ERROR_INVALID_MULTI_CONNEXITY</source>
6807       <translation>無効な多重関係</translation>
6808     </message>
6809     <message>
6810       <source>CHECK_ERROR_INVALID_RANGE</source>
6811       <translation>無効な領域</translation>
6812     </message>
6813     <message>
6814       <source>CHECK_ERROR_EMPTY_WIRE</source>
6815       <translation>空のワイヤ</translation>
6816     </message>
6817     <message>
6818       <source>CHECK_ERROR_REDUNDANT_EDGE</source>
6819       <translation>不要なエッジ</translation>
6820     </message>
6821     <message>
6822       <source>CHECK_ERROR_SELF_INTERSECTING_WIRE</source>
6823       <translation>自己交差ワイヤ</translation>
6824     </message>
6825     <message>
6826       <source>CHECK_ERROR_NO_SURFACE</source>
6827       <translation>面がない</translation>
6828     </message>
6829     <message>
6830       <source>CHECK_ERROR_INVALID_WIRE</source>
6831       <translation>無効なワイヤ</translation>
6832     </message>
6833     <message>
6834       <source>CHECK_ERROR_REDUNDANT_WIRE</source>
6835       <translation>不要なワイヤ</translation>
6836     </message>
6837     <message>
6838       <source>CHECK_ERROR_INTERSECTING_WIRES</source>
6839       <translation>交差エッジ</translation>
6840     </message>
6841     <message>
6842       <source>CHECK_ERROR_INVALID_IMBRICATION_OF_WIRES</source>
6843       <translation>ワイヤの無効な覆い</translation>
6844     </message>
6845     <message>
6846       <source>CHECK_ERROR_EMPTY_SHELL</source>
6847       <translation>空のシェル</translation>
6848     </message>
6849     <message>
6850       <source>CHECK_ERROR_REDUNDANT_FACE</source>
6851       <translation>不要な面</translation>
6852     </message>
6853     <message>
6854       <source>CHECK_ERROR_UNORIENTABLE_SHAPE</source>
6855       <translation>不適用形状</translation>
6856     </message>
6857     <message>
6858       <source>CHECK_ERROR_NOT_CLOSED</source>
6859       <translation>閉じていない</translation>
6860     </message>
6861     <message>
6862       <source>CHECK_ERROR_NOT_CONNECTED</source>
6863       <translation>接続していない</translation>
6864     </message>
6865     <message>
6866       <source>CHECK_ERROR_SUBSHAPE_NOT_IN_SHAPE</source>
6867       <translation>形状の中にないサブ形状</translation>
6868     </message>
6869     <message>
6870       <source>CHECK_ERROR_BAD_ORIENTATION</source>
6871       <translation>悪い方向</translation>
6872     </message>
6873     <message>
6874       <source>CHECK_ERROR_BAD_ORIENTATION_OF_SUBSHAPE</source>
6875       <translation>サブ形状の悪い方向</translation>
6876     </message>
6877     <message>
6878       <source>CHECK_ERROR_INVALID_TOLERANCE_VALUE</source>
6879       <translation>無効なトレランス値</translation>
6880     </message>
6881     <message>
6882       <source>CHECK_ERROR_CHECK_FAIL</source>
6883       <translation>失敗をチェック</translation>
6884     </message>
6885   </context>
6886   <context>
6887     <name>OperationGUI_ChamferDlg</name>
6888     <message>
6889       <source>D</source>
6890       <translation>D</translation>
6891     </message>
6892     <message>
6893       <source>FACE_1</source>
6894       <translation>フェース 1</translation>
6895     </message>
6896     <message>
6897       <source>FACE_2</source>
6898       <translation>フェース 2</translation>
6899     </message>
6900     <message>
6901       <source>SELECTED_FACES</source>
6902       <translation>選択面</translation>
6903     </message>
6904   </context>
6905   <context>
6906     <name>OperationGUI_FilletDlg</name>
6907     <message>
6908       <source>SELECTED_EDGES</source>
6909       <translation>選択エッジ</translation>
6910     </message>
6911     <message>
6912       <source>SELECTED_FACES</source>
6913       <translation>Faces</translation>
6914     </message>
6915   </context>
6916   <context>
6917     <name>RepairGUI_FreeBoundDlg</name>
6918     <message>
6919       <source>CAPTION</source>
6920       <translation>自由境界をチェック</translation>
6921     </message>
6922     <message>
6923       <source>FREE_BOUND</source>
6924       <translation>自由境界</translation>
6925     </message>
6926     <message>
6927       <source>NUMBER_CLOSED</source>
6928       <translation>閉じた自由境界の数</translation>
6929     </message>
6930     <message>
6931       <source>NUMBER_OPEN</source>
6932       <translation>開いた自由境界の数</translation>
6933     </message>
6934     <message>
6935       <source>NAME_CLOSED</source>
6936       <translation>Frontiere_Libre_Lermee_ %1</translation>
6937     </message>
6938     <message>
6939       <source>NAME_OPEN</source>
6940       <translation>Frontiere_Libre_Ouverte_ %1</translation>
6941     </message>
6942   </context>
6943   <context>
6944     <name>RepairGUI_GlueDlg</name>
6945     <message>
6946       <source>FACES_FOR_GLUING_ARE_DETECTED</source>
6947       <translation>%1 の顔 （s） で強調表示された赤の色をピックアップするがあります。この警告ボックスを閉じるし、をピックアップする面を選択</translation>
6948     </message>
6949     <message>
6950       <source>EDGES_FOR_GLUING_ARE_DETECTED</source>
6951       <translation>%1 のエッジ (s) で強調表示されている赤をピックアップするがあります。この警告ボックスを閉じるし、ピックアップするエッジを選択します。、</translation>
6952     </message>
6953     <message>
6954       <source>GLUE_FACES</source>
6955       <translation>フェースの固着</translation>
6956     </message>
6957     <message>
6958       <source>GLUE_EDGES</source>
6959       <translation>エッジ固着</translation>
6960     </message>
6961     <message>
6962       <source>SELECT_FACES</source>
6963       <translation>顔を選択します。</translation>
6964     </message>
6965     <message>
6966       <source>SELECT_EDGES</source>
6967       <translation>エッジを選択</translation>
6968     </message>
6969     <message>
6970       <source>GLUE_ALL_EDGES</source>
6971       <translation>一致するすべてのエッジを固着</translation>
6972     </message>
6973     <message>
6974       <source>THERE_ARE_NO_FACES_FOR_GLUING</source>
6975       <translation>貼り付けるには顔がないです。</translation>
6976     </message>
6977     <message>
6978       <source>THERE_ARE_NO_EDGES_FOR_GLUING</source>
6979       <translation>ペーストするエッジがないです。</translation>
6980     </message>
6981   </context>
6982   <context>
6983     <name>RepairGUI_ShapeProcessDlg</name>
6984     <message>
6985       <source>ERROR_NO_OBJECTS</source>
6986       <translation>フォームの処理、幾何学的オブジェクトを選択します。</translation>
6987     </message>
6988     <message>
6989       <source>ERROR_NO_OPERATORS</source>
6990       <translation>処理操作には、少なくとも、フォームを選択します。</translation>
6991     </message>
6992     <message>
6993       <source>TIME_CONSUMING</source>
6994       <translation>このオプションを有効にすると、特定のオブジェクトを時間の無駄が可能性があります。続行しますか。</translation>
6995     </message>
6996     <message>
6997       <source>WIDTH_FACTOR_TOL</source>
6998       <translation>Width factor tol.</translation>
6999     </message>
7000     <message>
7001       <source>VOLUME_TOL</source>
7002       <translation>Volume tol.</translation>
7003     </message>
7004     <message>
7005       <source>TO_MERGE_SOLIDS</source>
7006       <translation>ソリッドのマージ 用</translation>
7007     </message>
7008     <message>
7009       <source>SELECT_ALL</source>
7010       <translation>すべて選択</translation>
7011     </message>
7012   </context>
7013   <context>
7014     <name>GEOMToolsGUI_DeleteDlg</name>
7015     <message>
7016       <source>GEOM_REALLY_DELETE</source>
7017       <translation>オブジェクト %1 を削除しますか?</translation>
7018     </message>
7019     <message>
7020       <source>GEOM_REALLY_DELETE_ALL</source>
7021       <translation>すべてのオブジェクトを削除しますか?</translation>
7022     </message>
7023     <message>
7024       <source>GEOM_DELETE_OBJECTS</source>
7025       <translation>オブジェクトを削除します。</translation>
7026     </message>
7027   </context>
7028   <context>
7029     <name>GEOMToolsGUI_DeflectionDlg</name>
7030     <message>
7031       <source>GEOM_DEFLECTION_TLT</source>
7032       <translation>オブジェクトの変形の度合いを選択します。</translation>
7033     </message>
7034     <message>
7035       <source>GEOM_DEFLECTION</source>
7036       <translation>変形:</translation>
7037     </message>
7038   </context>
7039   <context>
7040     <name>GEOMToolsGUI_LineWidthDlg</name>
7041     <message>
7042       <source>GEOM_LINE_WIDTH</source>
7043       <translation>線の太さ:</translation>
7044     </message>
7045   </context>
7046   <context>
7047     <name>GEOMToolsGUI_MarkerDlg</name>
7048     <message>
7049       <source>SET_MARKER_TLT</source>
7050       <translation>ポイント マーカーを定義します。</translation>
7051     </message>
7052     <message>
7053       <source>STANDARD_MARKER</source>
7054       <translation>標準</translation>
7055     </message>
7056     <message>
7057       <source>CUSTOM_MARKER</source>
7058       <translation>カスタム</translation>
7059     </message>
7060     <message>
7061       <source>TYPE</source>
7062       <translation>型:</translation>
7063     </message>
7064     <message>
7065       <source>SCALE</source>
7066       <translation>スケール:</translation>
7067     </message>
7068     <message>
7069       <source>CUSTOM</source>
7070       <translation>テクスチャ:</translation>
7071     </message>
7072     <message>
7073       <source>BROWSE</source>
7074       <translation>移動...</translation>
7075     </message>
7076     <message>
7077       <source>OK_BTN</source>
7078       <translation>わかりました(&amp;O)</translation>
7079     </message>
7080     <message>
7081       <source>CANCEL_BTN</source>
7082       <translation>キャンセル(&amp;C)</translation>
7083     </message>
7084     <message>
7085       <source>HELP_BTN</source>
7086       <translation>ヘルプ(&amp;H)</translation>
7087     </message>
7088     <message>
7089       <source>LOAD_TEXTURE_TLT</source>
7090       <translation>テクスチャーを開く</translation>
7091     </message>
7092   </context>
7093   <context>
7094     <name>GEOMToolsGUI_MaterialPropertiesDlg</name>
7095     <message>
7096       <source>MATERIAL_PROPERTIES_TLT</source>
7097       <translation>色と材料特性</translation>
7098     </message>
7099     <message>
7100       <source>FRONT_FACE</source>
7101       <translation>フロント パネル</translation>
7102     </message>
7103     <message>
7104       <source>BACK_FACE</source>
7105       <translation>背面の色</translation>
7106     </message>
7107     <message>
7108       <source>REFLECTION_0</source>
7109       <translation>アンビエント</translation>
7110     </message>
7111     <message>
7112       <source>REFLECTION_1</source>
7113       <translation>ブロードキャスト</translation>
7114     </message>
7115     <message>
7116       <source>REFLECTION_2</source>
7117       <translation>スペキュラ</translation>
7118     </message>
7119     <message>
7120       <source>REFLECTION_3</source>
7121       <translation>馬頭</translation>
7122     </message>
7123     <message>
7124       <source>SHININESS</source>
7125       <translation>明るさ:</translation>
7126     </message>
7127     <message>
7128       <source>PHYSICAL</source>
7129       <translation>課された色</translation>
7130     </message>
7131     <message>
7132       <source>ADD_MATERIAL</source>
7133       <translation>素材を追加します。</translation>
7134     </message>
7135     <message>
7136       <source>DELETE_MATERIAL</source>
7137       <translation>材料を削除します。</translation>
7138     </message>
7139     <message>
7140       <source>RENAME_MATERIAL</source>
7141       <translation>材料の名前を変更します。</translation>
7142     </message>
7143     <message>
7144       <source>CURRENT_MATERIAL</source>
7145       <translation>[進行中]</translation>
7146     </message>
7147     <message>
7148       <source>CURRENT_COLOR</source>
7149       <translation>色</translation>
7150     </message>
7151     <message>
7152       <source>CUSTOM_MATERIAL</source>
7153       <translation>カスタム素材</translation>
7154     </message>
7155     <message>
7156       <source>QUE_CREATE_NEW_MATERIAL</source>
7157       <translation>定義済みのマテリアル プロパティを変更することはできません。新しいものを作成したいですか？</translation>
7158     </message>
7159     <message>
7160       <source>QUE_REMOVE_MATERIAL</source>
7161       <translation>%1 のプロパティを削除しますか?</translation>
7162     </message>
7163     <message>
7164       <source>OK_BTN</source>
7165       <translation>OK(&amp;O)</translation>
7166     </message>
7167     <message>
7168       <source>CANCEL_BTN</source>
7169       <translation>キャンセル(&amp;C)</translation>
7170     </message>
7171     <message>
7172       <source>HELP_BTN</source>
7173       <translation>ヘルプ(&amp;H)</translation>
7174     </message>
7175   </context>
7176   <context>
7177     <name>OperationGUI_GetSharedShapesDlg</name>
7178     <message>
7179       <source>GEOM_SHARED_SHAPES_TITLE</source>
7180       <translation>共有アイテムを取得</translation>
7181     </message>
7182     <message>
7183       <source>GEOM_GET_SHARED_SHAPES</source>
7184       <translation>共有要素</translation>
7185     </message>
7186     <message>
7187       <source>GEOM_SHARED_SHAPES_INPUT</source>
7188       <translation>データ入力</translation>
7189     </message>
7190     <message>
7191       <source>MSG_SHARED_SHAPES_TOO_FEW_SHAPES</source>
7192       <translation>必要なアイテムが選択されていない</translation>
7193     </message>
7194     <message>
7195       <source>GEOM_SHARED_SHAPE</source>
7196       <translation>Shared_%1</translation>
7197     </message>
7198     <message>
7199       <source>GEOM_SHARED_SHAPES_MULTISHARE</source>
7200       <translation>すべてが共有する</translation>
7201     </message>
7202   </context>
7203   <context>
7204     <name>GEOMToolsGUI_PublishDlg</name>
7205     <message>
7206       <source>GEOM_PUBLISH_OBJECTS_TLT</source>
7207       <translation>オブジェクトを発行</translation>
7208     </message>
7209     <message>
7210       <source>OBJECT_NAME</source>
7211       <translation>名前</translation>
7212     </message>
7213     <message>
7214       <source>OBJECT_ENTRY</source>
7215       <translation>エントリ</translation>
7216     </message>
7217     <message>
7218       <source>UNSELECT_ALL</source>
7219       <translation>全選択解除(&amp;n)</translation>
7220     </message>
7221     <message>
7222       <source>SELECT_ALL</source>
7223       <translation>全選択(&amp;A)</translation>
7224     </message>
7225     <message>
7226       <source>GEOM_PUBLISH_BTN</source>
7227       <translation>発行(&amp;P)</translation>
7228     </message>
7229     <message>
7230       <source>GEOM_PUBLISH_CLOSE_BTN</source>
7231       <translation>発行し閉じる(&amp;u)</translation>
7232     </message>
7233   </context>
7234   <context>
7235     <name>GEOMToolsGUI_ReduceStudyDlg</name>
7236     <message>
7237       <source>GEOM_REDUCE_STUDY_TITLE</source>
7238       <translation>スタディの削減</translation>
7239     </message>
7240     <message>
7241       <source>GEOM_REDUCE_STUDY_KEPT_OBJECTS</source>
7242       <translation>保持されたオブジェクト</translation>
7243     </message>
7244     <message>
7245       <source>GEOM_REDUCE_STUDY_REMOVE_OBJECTS</source>
7246       <translation>削除されたオブジェクト</translation>
7247     </message>
7248     <message>
7249       <source>GEOM_REDUCE_STUDY_NAME</source>
7250       <translation>Name</translation>
7251     </message>
7252     <message>
7253       <source>GEOM_REDUCE_STUDY_OPTIONS</source>
7254       <translation>オプション</translation>
7255     </message>
7256     <message>
7257       <source>GEOM_REDUCE_STUDY_INTERMEDIATES</source>
7258       <translation>中間オブジェクト</translation>
7259     </message>
7260     <message>
7261       <source>GEOM_REDUCE_STUDY_SUB_OBJECTS</source>
7262       <translation>サブオブジェクト</translation>
7263     </message>
7264     <message>
7265       <source>GEOM_REDUCE_STUDY_KEEP</source>
7266       <translation>保持</translation>
7267     </message>
7268     <message>
7269       <source>GEOM_REDUCE_STUDY_UNPUBLISH</source>
7270       <translation>非公開</translation>
7271     </message>
7272     <message>
7273       <source>GEOM_REDUCE_STUDY_REMOVE</source>
7274       <translation>削除</translation>
7275     </message>
7276     <message>
7277       <source>GEOM_REDUCE_STUDY_REMOVE_EMPTY_FOLDER</source>
7278       <translation>空フォルダの削除</translation>
7279     </message>
7280     <message>
7281       <source>GEOM_REDUCE_STUDY_SOFT_REMOVAL</source>
7282       <translation>ソフト除去</translation>
7283     </message>
7284     <message>
7285       <source>GEOM_REDUCE_STUDY_WARNING_DELETE</source>
7286       <translation>本当に中間オブジェクトを削除しますか？ この操作の適用後、スタディは無くなります。</translation>
7287     </message>
7288   </context>
7289   <context>
7290     <name>RepairGUI_UnionFacesDlg</name>
7291     <message>
7292       <source>GEOM_UNION_FACES_TITLE</source>
7293       <translation>共有面</translation>
7294     </message>
7295     <message>
7296       <source>GEOM_UNION_FACES</source>
7297       <translation>オブジェクト面の共有</translation>
7298     </message>
7299     <message>
7300       <source>UNION_FACES_NEW_OBJ_NAME</source>
7301       <translation>UnionFaces</translation>
7302     </message>
7303   </context>
7304   <context>
7305     <name>RepairGUI_InspectObjectDlg</name>
7306     <message>
7307       <source>GEOM_INSPECT_OBJECT_TITLE</source>
7308       <translation>オブジェクト点検</translation>
7309     </message>
7310     <message>
7311       <source>GEOM_INSPECT_OBJECT_MAIN_SHAPE</source>
7312       <translation>主形状</translation>
7313     </message>
7314     <message>
7315       <source>GEOM_INSPECT_TOLERANCE_FILTER</source>
7316       <translation>トレランスフィルタ</translation>
7317     </message>
7318     <message>
7319       <source>GEOM_INSPECT_RESET_MIN</source>
7320       <translation>最小値</translation>
7321     </message>
7322     <message>
7323       <source>GEOM_INSPECT_RESET_MAX</source>
7324       <translation>最大値</translation>
7325     </message>
7326     <message>
7327       <source>GEOM_INSPECT_OBJECT_SHOW</source>
7328       <translation>選択を表示</translation>
7329     </message>
7330     <message>
7331       <source>GEOM_INSPECT_OBJECT_SHOW_ONLY</source>
7332       <translation>選択のみを表示</translation>
7333     </message>
7334     <message>
7335       <source>GEOM_INSPECT_OBJECT_HIDE</source>
7336       <translation>選択を非表示</translation>
7337     </message>
7338     <message>
7339       <source>GEOM_INSPECT_OBJECT_PUBLISH</source>
7340       <translation>選択を公開</translation>
7341     </message>
7342     <message>
7343       <source>GEOM_INSPECT_OBJECT_NAME</source>
7344       <translation>名前</translation>
7345     </message>
7346   </context>
7347   <context>
7348     <name>GEOMGUI_CreationInfoWdg</name>
7349     <message>
7350       <source>CREATION_INFO_TITLE</source>
7351       <translation>情報</translation>
7352     </message>
7353     <message>
7354       <source>OPERATION</source>
7355       <translation>操作</translation>
7356     </message>
7357     <message>
7358       <source>PARAMETER</source>
7359       <translation>パラメーター</translation>
7360     </message>
7361     <message>
7362       <source>VALUE</source>
7363       <translation>値</translation>
7364     </message>
7365     <message>
7366       <source>NO_INFO</source>
7367       <translation>(有効情報なし)</translation>
7368     </message>
7369   </context>
7370   <context>
7371     <name>GEOMGUI_TextTreeWdg</name>
7372     <message>
7373       <source>TEXT_TREE_VIEW_TITLE</source>
7374       <translation>テキスト</translation>
7375     </message>
7376     <message>
7377       <source>TEXT_TREE_VIEW_NAME</source>
7378       <translation>名前</translation>
7379     </message>
7380   </context>
7381   <context>
7382     <name>EntityGUI_IsolineDlg</name>
7383     <message>
7384       <source>GEOM_ISOLINE_TITLE</source>
7385       <translation>等高線の構築</translation>
7386     </message>
7387     <message>
7388       <source>GEOM_ISOLINE</source>
7389       <translation>Isoline</translation>
7390     </message>
7391     <message>
7392       <source>GEOM_ISOLINE_U</source>
7393       <translation>U-Isoline</translation>
7394     </message>
7395     <message>
7396       <source>GEOM_ISOLINE_V</source>
7397       <translation>V-Isoline</translation>
7398     </message>
7399   </context>
7400   <context>
7401     <name>MeasureGUI_CheckSelfIntersectionsDlg</name>
7402     <message>
7403       <source>GEOM_CHECK_INTERSECT_TYPE</source>
7404       <translation>自己交差検出型</translation>
7405     </message>
7406     <message>
7407       <source>GEOM_CHECK_INTE_INTERSECTIONS</source>
7408       <translation>自己交差</translation>
7409     </message>
7410     <message>
7411       <source>GEOM_CHECK_INTE_SUBSHAPES</source>
7412       <translation>サブ形状</translation>
7413     </message>
7414     <message>
7415       <source>GEOM_CHECK_INTE_CHECK_LEVEL</source>
7416       <translation>チェックのレベル</translation>
7417     </message>
7418     <message>
7419       <source>GEOM_CHECK_INTE_SUMMARY</source>
7420       <translation>サマリ</translation>
7421     </message>
7422     <message>
7423       <source>GEOM_CHECK_INTE_COMPUTE</source>
7424       <translation>自己交差の計算</translation>
7425     </message>
7426     <message>
7427       <source>GEOM_SELF_INTERSECTION_NAME</source>
7428       <translation>自己交差</translation>
7429     </message>
7430     <message>
7431       <source>GEOM_NO_SELF_INTERSECTIONS</source>
7432       <translation>形状内に自己交差はありません。</translation>
7433     </message>
7434     <message>
7435       <source>GEOM_SELF_INTERSECTIONS_FOUND</source>
7436       <translation>いくつかの自己交差が検出されました</translation>
7437     </message>
7438     <message>
7439       <source>GEOM_CHECK_SELF_INTERSECTIONS_FAILED</source>
7440       <translation>自己交差の検出に失敗しました</translation>
7441     </message>
7442     <message>
7443       <source>GEOM_CHECK_SELF_INTERSECTIONS_ERRORS</source>
7444       <translation>警告: 操作中にエラーが発生したため、リストは完成されません。</translation>
7445     </message>
7446     <message>
7447       <source>GEOM_CHECK_INTE_V_V</source>
7448       <translation>頂点から頂点</translation>
7449     </message>
7450     <message>
7451       <source>GEOM_CHECK_INTE_V_E</source>
7452       <translation>頂点からエッジ と上記すべて</translation>
7453     </message>
7454     <message>
7455       <source>GEOM_CHECK_INTE_E_E</source>
7456       <translation>エッジからエッジと上記すべて</translation>
7457     </message>
7458     <message>
7459       <source>GEOM_CHECK_INTE_V_F</source>
7460       <translation>頂点から面と上記すべて</translation>
7461     </message>
7462     <message>
7463       <source>GEOM_CHECK_INTE_E_F</source>
7464       <translation>エッジから面と上記すべて</translation>
7465     </message>
7466     <message>
7467       <source>GEOM_CHECK_INTE_ALL</source>
7468       <translation>面から面と上記すべて</translation>
7469     </message>
7470     <message>
7471       <source>GEOM_CHECK_INT_DEFLECT</source>
7472       <translation>偏向係数</translation>
7473     </message>
7474     <message>
7475       <source>GEOM_CHECK_INT_DETECT_GAPS</source>
7476       <translation>トレランスとのギャップ検出</translation>
7477     </message>
7478   </context>
7479   <context>
7480     <name>MeasureGUI_FastCheckIntersectionsDlg</name>
7481     <message>
7482       <source>GEOM_FAST_CHECK_INT_DEFLECT</source>
7483       <translation>たわみ係数</translation>
7484     </message>
7485     <message>
7486       <source>GEOM_FAST_CHECK_INT_DETECT_GAPS</source>
7487       <translation>トレランスによるギャップ検出</translation>
7488     </message>
7489     <message>
7490       <source>GEOM_FAST_CHECK_INT_SUBSHAPES</source>
7491       <translation>オブジェクト %1 のサブ形状:</translation>
7492     </message>
7493     <message>
7494       <source>GEOM_FAST_CHECK_INT_COMPUTE</source>
7495       <translation>交点の計算</translation>
7496     </message>
7497     <message>
7498       <source>GEOM_FAST_INTERSECTION_NAME</source>
7499       <translation>クイック交点</translation>
7500     </message>
7501     <message>
7502       <source>GEOM_FAST_INTERSECTION_FAILS</source>
7503       <translation>交点はない</translation>
7504     </message>
7505     <message>
7506       <source>GEOM_FAST_CHECK_OBJ</source>
7507       <translation>オブジェクトと結果</translation>
7508     </message>
7509   </context>
7510   <context>
7511     <name>MeasureGUI_ShapeStatisticsDlg</name>
7512     <message>
7513       <source>GEOM_SHAPE_STATISTICS_TYPE</source>
7514       <translation>タイプ</translation>
7515     </message>
7516     <message>
7517       <source>GEOM_SHAPE_STATISTICS_LENGTH</source>
7518       <translation>エッジ長さ</translation>
7519     </message>
7520     <message>
7521       <source>GEOM_SHAPE_STATISTICS_AREA</source>
7522       <translation>面の面積</translation>
7523     </message>
7524     <message>
7525       <source>GEOM_SHAPE_STATISTICS_VOLUME</source>
7526       <translation>ソリッドの体積</translation>
7527     </message>
7528     <message>
7529       <source>GEOM_SHAPE_STATISTICS_NB_INTERVALS</source>
7530       <translation>間隔数</translation>
7531     </message>
7532     <message>
7533       <source>GEOM_SHAPE_STATISTICS_SCALAR_RANGE</source>
7534       <translation>スカラ範囲</translation>
7535     </message>
7536     <message>
7537       <source>GEOM_SHAPE_STATISTICS_COMPUTE</source>
7538       <translation>計算</translation>
7539     </message>
7540     <message>
7541       <source>GEOM_SHAPE_STATISTICS_MIN</source>
7542       <translation>Min</translation>
7543     </message>
7544     <message>
7545       <source>GEOM_SHAPE_STATISTICS_MAX</source>
7546       <translation>Max</translation>
7547     </message>
7548     <message>
7549       <source>GEOM_SHAPE_STATISTICS_CREATE_GROUPS</source>
7550       <translation>グループの作成</translation>
7551     </message>
7552     <message>
7553       <source>GEOM_SHAPE_STATISTICS_DISTRIBUTION_NB_ENT</source>
7554       <translation>エンティティ数</translation>
7555     </message>
7556     <message>
7557       <source>GEOM_SHAPE_STATISTICS_MIN_ERROR</source>
7558       <translation>範囲内最小の値をセットするかスカラ範囲のスイッチをOFFにしてください。</translation>
7559     </message>
7560     <message>
7561       <source>GEOM_SHAPE_STATISTICS_MAX_ERROR</source>
7562       <translation>範囲内最大の値をセットするかスカラ範囲のスイッチをOFFにしてください。</translation>
7563     </message>
7564     <message>
7565       <source>GEOM_SHAPE_STATISTICS_MIN_MAX_ERROR</source>
7566       <translation>範囲内最小値が最大値より大きくすることはできません</translation>
7567     </message>
7568     <message>
7569       <source>GEOM_MSG_GROUPS_CREATED</source>
7570       <translation>%1 グループを作成しました。</translation>
7571     </message>
7572   </context>
7573   <context>
7574     <name>TransformationGUI_ExtensionDlg</name>
7575     <message>
7576       <source>GEOM_EXTENSION_TITLE</source>
7577       <translation>エッジまたは面の拡張</translation>
7578     </message>
7579     <message>
7580       <source>GEOM_EXTENSION</source>
7581       <translation>拡張</translation>
7582     </message>
7583     <message>
7584       <source>GEOM_EXTENSION_MIN</source>
7585       <translation>第1パラメータ</translation>
7586     </message>
7587     <message>
7588       <source>GEOM_EXTENSION_MAX</source>
7589       <translation>最後のパラメータ</translation>
7590     </message>
7591     <message>
7592       <source>GEOM_EXTENSION_MIN_U</source>
7593       <translation>第1U-パラメータ</translation>
7594     </message>
7595     <message>
7596       <source>GEOM_EXTENSION_MAX_U</source>
7597       <translation>最後のU-パラメータ</translation>
7598     </message>
7599     <message>
7600       <source>GEOM_EXTENSION_MIN_V</source>
7601       <translation>第1V-パラメータ</translation>
7602     </message>
7603     <message>
7604       <source>GEOM_EXTENSION_MAX_V</source>
7605       <translation>最後のV-パラメータ</translation>
7606     </message>
7607     <message>
7608       <source>GEOM_EXTENSION_EDGE_NAME</source>
7609       <translation>ExtendedEdge</translation>
7610     </message>
7611     <message>
7612       <source>GEOM_EXTENSION_FACE_NAME</source>
7613       <translation>拡張面</translation>
7614     </message>
7615   </context>
7616   <context>
7617     <name>EntityGUI_SurfFromFaceDlg</name>
7618     <message>
7619       <source>GEOM_SURF_FROM_FACE_TITLE</source>
7620       <translation>面から表面の作成</translation>
7621     </message>
7622     <message>
7623       <source>GEOM_SURF_FROM_FACE</source>
7624       <translation>面から表面</translation>
7625     </message>
7626     <message>
7627       <source>GEOM_SURF_FROM_FACE_NAME</source>
7628       <translation>SurfaceFromFace</translation>
7629     </message>
7630   </context>
7631   <context>
7632     <name>OperationGUI_TransferDataDlg</name>
7633     <message>
7634       <source>GEOM_TRANSFER_DATA_TITLE</source>
7635       <translation>データ転送</translation>
7636     </message>
7637     <message>
7638       <source>GEOM_TRANSFER_DATA</source>
7639       <translation>データ転送</translation>
7640     </message>
7641     <message>
7642       <source>GEOM_TRANSFER_DATA_FROM</source>
7643       <translation>ソース形状</translation>
7644     </message>
7645     <message>
7646       <source>GEOM_TRANSFER_DATA_TO</source>
7647       <translation>行き先形状</translation>
7648     </message>
7649     <message>
7650       <source>GEOM_TRANSFER_DATA_METHOD</source>
7651       <translation>検出操作のタイプ</translation>
7652     </message>
7653     <message>
7654       <source>GEOM_TD_METHOD_GETINPLACE</source>
7655       <translation>場所の中で取得</translation>
7656     </message>
7657     <message>
7658       <source>GEOM_TD_METHOD_GETINPLACE_OLD</source>
7659       <translation>場所（旧）の中で取得</translation>
7660     </message>
7661     <message>
7662       <source>GEOM_TD_METHOD_GETINPLACE_HISTORY</source>
7663       <translation>履歴より場所の中で取得</translation>
7664     </message>
7665     <message>
7666       <source>GEOM_TRANSFER_DATA_INFO</source>
7667       <translation>データ転送: 情報</translation>
7668     </message>
7669     <message>
7670       <source>GEOM_TRANSFER_DATA_NOT_COPIED</source>
7671       <translation>コピーされたものはありません。</translation>
7672     </message>
7673     <message>
7674       <source>GEOM_TRANSFER_DATA_COPIED</source>
7675       <translation>以下のデータがコピーされます:</translation>
7676     </message>
7677     <message>
7678       <source>GEOM_TRANSFER_DATA_NAMES</source>
7679       <translation>名前: %2 の %1</translation>
7680     </message>
7681     <message>
7682       <source>GEOM_TRANSFER_DATA_MATERIALS</source>
7683       <translation>材料: %2 の %1</translation>
7684     </message>
7685   </context>
7686   <context>
7687     <name>TransformationGUI_ProjectionOnCylDlg</name>
7688     <message>
7689       <source>GEOM_PROJ_ON_CYL_TITLE</source>
7690       <translation>円筒上に投影</translation>
7691     </message>
7692     <message>
7693       <source>GEOM_PROJ_ON_CYL_START_ANGLE</source>
7694       <translation>Starting angle</translation>
7695     </message>
7696     <message>
7697       <source>GEOM_PROJ_ON_CYL_LENGTH_ANGLE</source>
7698       <translation>Length angle</translation>
7699     </message>
7700     <message>
7701       <source>GEOM_PROJ_ON_CYL_ROTATION_ANGLE</source>
7702       <translation>回転角度</translation>
7703     </message>
7704   </context>
7705   <context>
7706     <name>OperationGUI_ExtractionDlg</name>
7707     <message>
7708       <source>GEOM_EXTRACT_TITLE</source>
7709       <translation>抽出と再構築</translation>
7710     </message>
7711     <message>
7712       <source>GEOM_EXTRACT_TYPE</source>
7713       <translation>抽出タイプ</translation>
7714     </message>
7715     <message>
7716       <source>GEOM_EXTRACT_INPUT_PARAMS</source>
7717       <translation>入力パラメータ</translation>
7718     </message>
7719     <message>
7720       <source>GEOM_EXTRACT_STATISTICS</source>
7721       <translation>統計</translation>
7722     </message>
7723     <message>
7724       <source>GEOM_EXTRACT_SUB_SHAPE_TYPE</source>
7725       <translation>Sub-shape type</translation>
7726     </message>
7727     <message>
7728       <source>GEOM_EXTRACT_FILTERED_SHAPES</source>
7729       <translation>フィルタされた形状</translation>
7730     </message>
7731     <message>
7732       <source>GEOM_EXTRACT_SHAPES_TO_EXTRACT</source>
7733       <translation>形状の引き伸ばし</translation>
7734     </message>
7735     <message>
7736       <source>GEOM_EXTRACT_REBUILD</source>
7737       <translation>再構築</translation>
7738     </message>
7739     <message>
7740       <source>GEOM_EXTRACT_REMOVED</source>
7741       <translation>削除</translation>
7742     </message>
7743     <message>
7744       <source>GEOM_EXTRACT_MODIFIED</source>
7745       <translation>修正</translation>
7746     </message>
7747     <message>
7748       <source>GEOM_EXTRACT_ADDED</source>
7749       <translation>追加</translation>
7750     </message>
7751     <message>
7752       <source>GEOM_EXTRACT_NAME</source>
7753       <translation>抽出</translation>
7754     </message>
7755   </context>
7756 </TS>