1 # This is a Qt message file in .po format. Each msgid starts with
2 # a scope. This scope should *NOT* be translated - eg. translating
3 # from French to English, "Foo::Bar" would be translated to "Pub",
7 "Project-Id-Version: PROJECT VERSION\n"
8 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
9 "PO-Revision-Date: YYYY-MM-DD\n"
10 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
11 "Content-Type: text/plain; charset=iso-8859-1\n"
14 #==============================================================================
18 msgid "GEOM_BUT_APPLY"
22 msgid "GEOM_BUT_CLOSE"
26 msgid "GEOM_BUT_CANCEL"
43 msgid "GEOM_BUT_EXPLODE"
47 #==============================================================================
50 #: GeometryGUI.cxx:563
51 msgid "GEOM_INF_LOADED"
52 msgstr "Le fichier %1 est chargé."
55 #==============================================================================
58 #: GeometryGUI.cxx:3069
59 msgid "GEOM_PRP_COMMAND"
60 msgstr "Pas de commande associée à l'id = %1."
62 #: GeometryGUI.cxx:4977
63 msgid "GEOM_PRP_ABORT"
64 msgstr "L'opération a echoué"
66 #: GeometryGUI.cxx:5058
68 msgstr "Opération effectuée"
70 #: GeometryGUI.cxx:3717
71 msgid "GEOM_PRP_LOADING"
72 msgstr "Chargement de %1 ..."
74 #: GeometryGUI.cxx:1412
75 msgid "GEOM_PRP_NULLSHAPE"
76 msgstr "Erreur, objet inconsistant ou inapproprié !"
78 #: GeometryGUI.cxx:5072
79 msgid "GEOM_PRP_READY"
82 #: GeometryGUI.cxx:1690
83 msgid "GEOM_PRP_SELECT_SUBSHAPES"
84 msgstr "Selection de sous objets"
87 msgstr "Confirmer cette operation"
89 msgid "GEOM_CONFIRM_INFO"
90 msgstr "L'objet contient %1 sous objets"
93 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
94 msgstr "Non permis dans viewer VTK"
96 #: GeometryGUI.cxx:1690
97 msgid "GEOM_PRP_SHAPE_IN_STUDY"
98 msgstr "La shape principale doit etre avant dans l'etude"
100 #: GeometryGUI.cxx:1690
101 msgid "GEOM_PRP_SELECT_EDGE"
102 msgstr "Selectionner les edges et clicker sur Apply"
104 #: GeometryGUI.cxx:1690
105 msgid "GEOM_PRP_SELECT_FACE"
106 msgstr "Select les faces a supprimer et clicker sur Ok/Apply"
108 #: GeometryGUI.cxx:1690
109 msgid "GEOM_PRP_SELECT_FIRST"
110 msgstr "Selectionner la shape principale en premier"
112 #: GeometryGUI.cxx:1690
113 msgid "GEOM_PRP_MIN_DIST"
114 msgstr "Min Distance non calculer"
117 #==============================================================================
120 #: GeometryGUI.cxx:3698
121 msgid "GEOM_MEN_ALL_FILES"
122 msgstr "Tous fichiers ( * )"
124 #: GeometryGUI.cxx:4389
125 msgid "GEOM_MEN_ANGLE"
128 #: GeometryGUI.cxx:3941
129 msgid "GEOM_MEN_COMPONENT"
132 #: GeometryGUI.cxx:4389
133 msgid "GEOM_MEN_ENTER_ANGLE"
134 msgstr "Saisir un angle en degrés"
136 #: GeometryGUI.cxx:3758
137 msgid "GEOM_MEN_EXPORT"
140 #: GeometryGUI.cxx:3648
141 msgid "GEOM_MEN_IMPORT"
144 #: GeometryGUI.cxx:3761
145 msgid "GEOM_MEN_IMPORT_BREP"
146 msgstr "Fichiers BREP ( *.brep )"
148 #: GeometryGUI.cxx:3762
149 msgid "GEOM_MEN_IMPORT_IGES"
150 msgstr "Fichiers IGES ( *.iges *.igs )"
152 #: GeometryGUI.cxx:3763
153 msgid "GEOM_MEN_IMPORT_STEP"
154 msgstr "Fichiers STEP ( *.step *.stp )"
156 #: GeometryGUI.cxx:2931
157 msgid "GEOM_MEN_ISOS"
158 msgstr "Choisir un nombre d'isos"
160 #: GeometryGUI.cxx:4278
161 msgid "GEOM_MEN_POPUP_NAME"
164 #: GeometryGUI.cxx:4414
165 msgid "GEOM_MEN_SKETCHER_X"
166 msgstr "Saisir une longueur pour fixer X"
168 #: GeometryGUI.cxx:4438
169 msgid "GEOM_MEN_SKETCHER_Y"
170 msgstr "Saisir une longueur pour fixer Y"
172 #: GeometryGUI.cxx:2898
173 msgid "GEOM_MEN_TRANSPARENCY"
174 msgstr "Transparence"
176 #: GeometryGUI.cxx:4413
180 #: GeometryGUI.cxx:4437
184 #: GeometryGUI_NbIsosDlg.cxx:36
185 msgid "GEOM_MEN_ISOU"
188 #: GeometryGUI_NbIsosDlg.cxx:53
189 msgid "GEOM_MEN_ISOV"
192 #: GeometryGUI_TransparencyDlg.cxx:31
193 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
194 msgstr "Transparence :"
196 msgid "GEOM_MEN_STEP_LABEL"
199 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
200 msgstr "Noms identiques : selectionner avec la souris !"
202 msgid "GEOM_NAME_INCORRECT"
203 msgstr "Le nom saisi n'existe pas"
208 #==============================================================================
211 #: GeometryGUI.cxx:892
212 msgid "GEOM_WRN_RADIUS_NULL"
213 msgstr "Le rayon est nul"
215 #: GeometryGUI.cxx:3854
216 msgid "GEOM_WRN_WARNING"
217 msgstr "Avertissement"
220 #==============================================================================
228 msgid "GEOM_MAIN_OBJECT"
229 msgstr "Objet Principal"
232 msgid "GEOM_TOOL_OBJECT"
236 msgid "GEOM_BASE_OBJECT"
237 msgstr "Objet De Base"
240 msgid "GEOM_PATH_OBJECT"
241 msgstr "Objet Chemin"
248 msgid "GEOM_OBJECT_I"
252 msgid "GEOM_OBJECT_RESULT"
253 msgstr "Objet Et Résultat"
260 msgid "GEOM_BASE_POINT"
261 msgstr "Point De Base"
264 msgid "GEOM_CENTER_POINT"
265 msgstr "Point Centre"
268 msgid "GEOM__DIAGONAL_POINTS"
269 msgstr "Points Diagonaux"
272 msgid "GEOM_CENTRAL_POINT"
273 msgstr "Point Central"
284 msgid "GEOM_ARGUMENTS"
296 msgid "GEOM_RADIUS_I"
312 msgid "GEOM_COORDINATES"
324 msgid "GEOM_REVERSE_U"
328 msgid "GEOM_REVERSE_V"
344 msgid "GEOM_VECTOR_LENGTH"
345 msgstr "Longueur Du Vecteur :"
348 msgid "GEOM_REVERSE_VECTOR"
349 msgstr "Renverser Le Vecteur"
352 msgid "GEOM_PLANE_MIRROR"
356 msgid "GEOM_FACE_SELECTION"
357 msgstr "Selection de Face"
364 msgid "GEOM_WATER_DENSITY"
365 msgstr "Densité de l'eau :"
368 msgid "GEOM_MESHING_DEFLECTION"
369 msgstr "Déflection Du Maillage :"
372 msgid "GEOM_DIMENSIONS"
376 msgid "GEOM_PRECISION"
380 msgid "GEOM_SELECTION"
384 msgid "GEOM_NB_TIMES"
388 msgid "GEOM_NB_TIMES_U"
389 msgstr "Nb. Fois U :"
392 msgid "GEOM_NB_TIMES_V"
393 msgstr "Nb. Fois V :"
408 #==============================================================================
412 msgid "GEOM_PARTITION"
416 msgid "GEOM_TOLERANCE"
420 msgid "GEOM_ORIENTATION"
428 msgid "GEOM_REVOLUTION"
432 msgid "GEOM_ROTATION"
436 msgid "GEOM_ARCHIMEDE"
448 msgid "GEOM_DISTANCE"
453 msgstr "Surface Par Courbes"
472 msgid "GEOM_TRANSLATION"
477 msgstr "Plan de Travail"
488 msgid "GEOM_SUB_SHAPE"
492 msgid "GEOM_SUPRESSFACE"
493 msgstr "Supression de Face"
504 msgid "GEOM_CHECK_SHAPE"
513 msgstr "Boite Anglobante"
517 msgstr "Centre de Masse"
520 msgid "GEOM_PROPERTIES"
521 msgstr "Basiques Proprietes"
524 msgid "GEOM_MULTITRANSLATION"
525 msgstr "Multi-Translation"
528 msgid "GEOM_MULTIROTATION"
529 msgstr "Multi-Rotation"
532 #==============================================================================
548 msgid "GEOM_COMPOUND"
552 msgid "GEOM_COMPOUNDSOLID"
560 msgid "GEOM_CYLINDER"
600 msgid "GEOM_SURFCONE"
601 msgstr "Face Conique"
604 msgid "GEOM_SURFCYLINDER"
605 msgstr "Face Cylindrique"
608 msgid "GEOM_SURFSPHERE"
609 msgstr "Face Sphèrique"
612 msgid "GEOM_SURFTORUS"
613 msgstr "Face Toroique"
624 msgid "GEOM_VECTOR_U"
628 msgid "GEOM_VECTOR_V"
640 msgid "GEOM_PARAMETER"
645 #==============================================================================
689 #==============================================================================
693 msgid "GEOM_STEP_TITLE"
694 msgstr "Increment par défaut lors des constructions"
696 #: GeometryGUI_ArcDlg.cxx:45
697 msgid "GEOM_ARC_TITLE"
698 msgstr "Construction d'un Arc"
700 #: GeometryGUI_ArchimedeDlg.cxx:55
701 msgid "GEOM_ARCHIMEDE_TITLE"
702 msgstr "Construction d'Archimède"
704 #: GeometryGUI_BndBoxDlg.cxx:59
705 msgid "GEOM_BNDBOX_TITLE"
706 msgstr "Boite Englobante"
708 #: GeometryGUI_BndBoxDlg.cxx:82
709 msgid "GEOM_BNDBOX_OBJDIM"
710 msgstr "Objet and ses dimensions"
712 #: GeometryGUI_BoxDlg.cxx:50
713 msgid "GEOM_BOX_TITLE"
714 msgstr "Construction d'une Boite"
716 #: GeometryGUI_BoxDlg.cxx:50
718 msgstr "Dimensions A l'Origine"
720 #: GeometryGUI_ChamferDlg.cxx:58
721 msgid "GEOM_CHAMFER_TITLE"
722 msgstr "Construction d'un Chanfrein"
724 #: GeometryGUI_ChamferDlg.cxx:58
725 msgid "GEOM_CHAMFER_ALL"
726 msgstr "Chanfrein sur toute la Shape"
728 #: GeometryGUI_ChamferDlg.cxx:58
729 msgid "GEOM_CHAMFER_EDGES"
730 msgstr "Chanfrein sur Edges de la Shape"
732 #: GeometryGUI_ChamferDlg.cxx:58
733 msgid "GEOM_CHAMFER_FACES"
734 msgstr "Chanfrein sur Faces de la Shape"
736 #: GeometryGUI_CircleDlg.cxx:48
737 msgid "GEOM_CIRCLE_TITLE"
738 msgstr "Construction d'un Cercle"
740 #: GeometryGUI_CenterMassDlg.cxx:77
741 msgid "GEOM_CMASS_TITLE"
742 msgstr "Centre De Gravité"
744 msgid "GEOM_PLANE_SIZE"
745 msgstr "Taille du plan :"
747 #: GeometryGUI_CommonDlg.cxx:47
748 msgid "GEOM_COMMON_TITLE"
749 msgstr "BOOLEEN : Jonction De Deux Objets"
751 #: GeometryGUI_CompoundDlg.cxx:44
752 msgid "GEOM_COMPOUND_TITLE"
753 msgstr "Création d'un Compound"
755 #: GeometryGUI_ConeDlg.cxx:49
756 msgid "GEOM_CONE_TITLE"
757 msgstr "Construction d'un Cone"
759 #: GeometryGUI_CutDlg.cxx:48
760 msgid "GEOM_CUT_TITLE"
761 msgstr "BOOLEEN : Couper Deux Objets"
763 #: GeometryGUI_CylinderDlg.cxx:47
764 msgid "GEOM_CYLINDER_TITLE"
765 msgstr "Construction d'un Cylindre"
767 #: GeometryGUI_CheckShape.cxx:60
768 msgid "GEOM_CHECK_TITLE"
771 #: GeometryGUI_CheckShape.cxx:83
772 msgid "GEOM_CHECK_INFOS"
773 msgstr "Objet et ses Informations Topologiques"
775 #: GeometryGUI_DistanceDlg.cxx:57
776 msgid "GEOM_MINDIST_TITLE"
777 msgstr "Distance Minimale entre Deux Objets"
779 #: GeometryGUI_DistanceDlg.cxx:57
780 msgid "GEOM_MINDIST_OBJ"
781 msgstr "Objets Et Resultats"
783 #: GeometryGUI_EdgeDlg.cxx:47
784 msgid "GEOM_EDGE_TITLE"
785 msgstr "Création d'un Edge"
787 #: GeometryGUI_FilletDlg.cxx:58
788 msgid "GEOM_FILLET_TITLE"
789 msgstr "Construction d'un Congé"
791 #: GeometryGUI_FilletDlg.cxx:58
792 msgid "GEOM_FILLET_ALL"
793 msgstr "Congé sur toute la Shape"
795 #: GeometryGUI_FilletDlg.cxx:58
796 msgid "GEOM_FILLET_EDGES"
797 msgstr "Congé sur Edges de la Shape"
799 #: GeometryGUI_FilletDlg.cxx:58
800 msgid "GEOM_FILLET_FACES"
801 msgstr "Congé sur Faces de la Shape"
803 #: GeometryGUI_FaceDlg.cxx:49
804 msgid "GEOM_FACE_TITLE"
805 msgstr "Création d'une Face"
807 #: GeometryGUI_FaceDlg.cxx:78
808 msgid "GEOM_FACE_FFW"
809 msgstr "Face a partir d'un wire"
811 #: GeometryGUI_FaceDlg.cxx:103
812 msgid "GEOM_FACE_OPT"
813 msgstr "Création d'une Face plane"
815 #: GeometryGUI_FillingDlg.cxx:53
816 msgid "GEOM_FILLING_TITLE"
817 msgstr "Surface Par Courbes"
819 #: GeometryGUI_FillingDlg.cxx:112
820 msgid "GEOM_FILLING_ARG"
821 msgstr "Argument Et Parametres"
823 #: GeometryGUI_FillingDlg.cxx:128
824 msgid "GEOM_FILLING_MIN_DEG"
827 #: GeometryGUI_FillingDlg.cxx:142
828 msgid "GEOM_FILLING_MAX_DEG"
831 #: GeometryGUI_FillingDlg.cxx:150
832 msgid "GEOM_FILLING_TOL_2D"
835 #: GeometryGUI_FillingDlg.cxx:170
836 msgid "GEOM_FILLING_COMPOUND"
837 msgstr "Compound de Courbes"
839 #: GeometryGUI_FillingDlg.cxx:184
840 msgid "GEOM_FILLING_TOL_3D"
843 #: GeometryGUI_FillingDlg.cxx:192
844 msgid "GEOM_FILLING_NB_ITER"
847 #: GeometryGUI_FuseDlg.cxx:48
848 msgid "GEOM_FUSE_TITLE"
849 msgstr "BOOLEEN : Fusionner deux Objets"
851 #: GeometryGUI_InertiaDlg.cxx:42
852 msgid "GEOM_INERTIA_TITLE"
853 msgstr "Calculs d'Inertie"
855 #: GeometryGUI_InertiaDlg.cxx:50
856 msgid "GEOM_INERTIA_CONSTR"
857 msgstr "Matrice Et Moments d'Inertie"
859 #: GeometryGUI_InertiaDlg.cxx:100
860 msgid "GEOM_INERTIA_I"
863 #: GeometryGUI_InertiaDlg.cxx:182
864 msgid "GEOM_INERTIA_IXYZ"
865 msgstr "IX & IY & IZ"
867 #: GeometryGUI_LineDlg.cxx:50
868 msgid "GEOM_LINE_TITLE"
869 msgstr "Construction d'une Ligne"
871 #: GeometryGUI_MaxToleranceDlg.cxx:53
872 msgid "GEOM_TOLERANCE_TITLE"
873 msgstr "Tolerance Maximale"
875 #: GeometryGUI_MaxToleranceDlg.cxx:84
876 msgid "GEOM_TOLERANCE_CONSTR"
877 msgstr "Object et ses Tolerances"
879 #: GeometryGUI_MaxToleranceDlg.cxx:121
880 msgid "GEOM_TOLERANCE_FACE"
883 #: GeometryGUI_MaxToleranceDlg.cxx:138
884 msgid "GEOM_TOLERANCE_EDGE"
887 #: GeometryGUI_MaxToleranceDlg.cxx:155
888 msgid "GEOM_TOLERANCE_VERTEX"
891 #: GeometryGUI_MirrorDlg.cxx:52
892 msgid "GEOM_MIRROR_TITLE"
893 msgstr "Methode Miroir"
895 #: GeometryGUI_OrientationDlg.cxx:46
896 msgid "GEOM_ORIENTATION_TITLE"
897 msgstr "Changer l'Orientation"
899 #: GeometryGUI_OrientationDlg.cxx:134
900 msgid "GEOM_ORIENTATION_OPT"
901 msgstr "Renverser l'orientation avec une simulation de vecteur normal"
903 #: GeometryGUI_PartitionDlg.cxx:45
904 msgid "GEOM_PARTITION_TITLE"
905 msgstr "Partition d'Objects Avec Outils"
907 #: GeometryGUI_PartitionDlg.cxx:45
908 msgid "GEOM_KEEP_OBJECT"
911 #: GeometryGUI_PartitionDlg.cxx:45
912 msgid "GEOM_PARTITION_ORIENTATION"
913 msgstr "Change l'orientation"
915 #: GeometryGUI_PipeDlg.cxx:47
916 msgid "GEOM_PIPE_TITLE"
917 msgstr "Construction d'une Pipe"
919 #: GeometryGUI_PointDlg.cxx:52
920 msgid "GEOM_POINT_TITLE"
921 msgstr "Construction d'un Point"
923 #: GeometryGUI_PlaneDlg.cxx:60
924 msgid "GEOM_PLANE_TITLE"
925 msgstr "Construction d'un Plan"
927 #: GeometryGUI_PlaneDlg.cxx:172
928 msgid "GEOM_PLANE_PVC"
929 msgstr "Point + Vecteur Coordonnes"
931 #: GeometryGUI_PlaneDlg.cxx:133
932 msgid "GEOM_PLANE_PV"
933 msgstr "Point + Vecteur"
935 #: GeometryGUI_PrismDlg.cxx:54
936 msgid "GEOM_PRISM_TITLE"
937 msgstr "Extruder une Shape de base"
939 #: GeometryGUI_PrismDlg.cxx:83
940 msgid "GEOM_PRISM_BSV"
941 msgstr "Shape de base + Vecteur"
943 #: GeometryGUI_PropertiesDlg.cxx:56
944 msgid "GEOM_PROPERTIES_TITLE"
945 msgstr "Proprietes Basiques"
947 #: GeometryGUI_PropertiesDlg.cxx:78
948 msgid "GEOM_PROPERTIES_CONSTR"
949 msgstr "Objet et ses Proprietes"
951 #: GeometryGUI_PropertiesDlg.cxx:114
952 msgid "GEOM_PROPERTIES_SURFACE"
955 #: GeometryGUI_PropertiesDlg.cxx:120
956 msgid "GEOM_PROPERTIES_VOLUME"
959 #: GeometryGUI_RevolDlg.cxx:49
960 msgid "GEOM_REVOLUTION_TITLE"
961 msgstr "Construction Par Revolution"
963 #: GeometryGUI_RotationDlg.cxx:51
964 msgid "GEOM_ROTATION_TITLE"
965 msgstr "Rotation d'un Objet"
967 #: GeometryGUI_ScaleDlg.cxx:52
968 msgid "GEOM_SCALE_TITLE"
969 msgstr "Echelle d'un Objet"
971 #: GeometryGUI_ScaleDlg.cxx:117
972 msgid "GEOM_SCALE_FACTOR"
973 msgstr "Facteur d'echelle"
975 #: GeometryGUI_SectionDlg.cxx:50
976 msgid "GEOM_SECTION_TITLE"
977 msgstr "BOOLEEN : Section De Deux Objets"
979 #: GeometryGUI_SewingDlg.cxx:48
980 msgid "GEOM_SEWING_TITLE"
981 msgstr "Coudre des Topologies"
983 #: GeometryGUI_ShellDlg.cxx:53
984 msgid "GEOM_SHELL_TITLE"
985 msgstr "Construction d'une Shell"
987 #: GeometryGUI_ShellDlg.cxx:74
988 msgid "GEOM_SHELL_LIST"
989 msgstr "List de Faces Connectees"
991 #: GeometryGUI_SphereDlg.cxx:50
992 msgid "GEOM_SPHERE_TITLE"
993 msgstr "Construction d'une Sphere"
995 #: GeometryGUI_SphereDlg.cxx:113
996 msgid "GEOM_SPHERE_CR"
997 msgstr "Centre + rayon"
999 #: GeometryGUI_SphereDlg.cxx:146
1000 msgid "GEOM_SPHERE_RO"
1001 msgstr "Rayon a l'origine"
1003 #: GeometryGUI_SubShapeDlg.cxx:55
1004 msgid "GEOM_SUBSHAPE_TITLE"
1005 msgstr "Selection de Sous Shapes"
1007 #: GeometryGUI_SubShapeDlg.cxx:131
1008 msgid "GEOM_SUBSHAPE_TYPE"
1009 msgstr "Type de Sous Shapes"
1011 #: GeometryGUI_SubShapeDlg.cxx:137
1012 msgid "GEOM_SUBSHAPE_SELECT"
1013 msgstr "Selectionner de Sous Shapes"
1015 #: GeometryGUI_TorusDlg.cxx:51
1016 msgid "GEOM_TORUS_TITLE"
1017 msgstr "Constructiond'un Tore"
1019 #: GeometryGUI_SuppressFacesDlg.cxx:103
1020 msgid "GEOM_SUPRESSFACE_TITLE"
1021 msgstr "Supprimer des Faces dans un Objet"
1023 #: GeometryGUI_SuppressFacesDlg.cxx:164
1024 msgid "GEOM_SUPRESSFACE_SELECT"
1025 msgstr "Selectionner les Faces a Supprimer"
1027 #: GeometryGUI_TranslationDlg.cxx:78
1028 msgid "GEOM_TRANSLATION_COOR"
1029 msgstr "Translation Avec Coordonnees"
1031 msgid "GEOM_TRANSPARENCY_TITLE"
1032 msgstr "Transparence"
1034 msgid "GEOM_TRANSPARENCY_OPAQUE"
1037 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1038 msgstr "Transparent"
1040 msgid "GEOM_SUPPRESSHOLE_TITLE"
1041 msgstr "Suppression de trous"
1043 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1044 msgstr "Selection de la face initiale"
1046 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1047 msgstr "Selection du contour/trou sur la face"
1049 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1050 msgstr "Selection de la face terminale (si trou traversant)"
1052 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1053 msgstr "Selection de contour final (si trou traversant)"
1055 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1056 msgstr "Face ou shell"
1058 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1059 msgstr "Selection de trou(s) sur la face"
1061 #: GeometryGUI_TranslationDlg.cxx:56
1062 msgid "GEOM_TRANSLATION_TITLE"
1063 msgstr "Translation d'un Objet"
1065 #: GeometryGUI_VectorDlg.cxx:54
1066 msgid "GEOM_VECTOR_TITLE"
1067 msgstr "Construction d'un Vecteur"
1069 #: GeometryGUI_WhatisDlg.cxx:63
1070 msgid "GEOM_WHATIS_TITLE"
1073 #: GeometryGUI_WhatisDlg.cxx:86
1074 msgid "GEOM_WHATIS_OBJECT"
1075 msgstr "Objet et ses Informations Topologiques"
1077 #: GeometryGUI_WireDlg.cxx:46
1078 msgid "GEOM_WIRE_TITLE"
1079 msgstr "Creer un Wire"
1081 #: GeometryGUI_WireDlg.cxx:103
1082 msgid "GEOM_WIRE_CONNECT"
1083 msgstr "Creation d'un Wire a partir de wires/edges connectes"
1085 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1086 msgid "GEOM_WPALNE_TITLE"
1087 msgstr "plan de travail"
1089 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1090 msgid "GEOM_WPALNE_FACE"
1091 msgstr "Plan Ou Face plane"
1093 #: GeometryGUI_multiTranslationDlg.cxx:107
1094 msgid "GEOM_MULTITRANSLATION_TITLE"
1095 msgstr "Multi-Translation"
1097 #: GeometryGUI_multiTranslationDlg.cxx:107
1098 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1099 msgstr "Multi Translation Simple"
1101 #: GeometryGUI_multiTranslationDlg.cxx:107
1102 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1103 msgstr "Multi Translation Double"
1105 #: GeometryGUI_multiRotationDlg.cxx:107
1106 msgid "GEOM_MULTIROTATION_TITLE"
1107 msgstr "Multi-Rotation"
1109 #: GeometryGUI_multiRotationDlg.cxx:107
1110 msgid "GEOM_MULTIROTATION_SIMPLE"
1111 msgstr "Multi Rotation Simple"
1113 #: GeometryGUI_multiRotationDlg.cxx:107
1114 msgid "GEOM_MULTIROTATION_DOUBLE"
1115 msgstr "Multi Rotation Double"
1117 msgid "GEOM_PARAM_POINT"
1118 msgstr "Point paramétrique"
1121 #==============================================================================
1124 #: GeometryGUI.cxx:4613
1125 msgid "GEOM_MEN_WIREFRAME"
1128 #: GeometryGUI.cxx:4613
1129 msgid "GEOM_MEN_SHADING"