1 # This is a Qt message file in .po format. Each msgid starts with
2 # a scope. This scope should *NOT* be translated - eg. translating
3 # from French to English, "Foo::Bar" would be translated to "Pub",
7 "Project-Id-Version: PROJECT VERSION\n"
8 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
9 "PO-Revision-Date: YYYY-MM-DD\n"
10 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
11 "Content-Type: text/plain; charset=iso-8859-1\n"
14 #==============================================================================
18 msgid "GEOM_BUT_APPLY"
22 msgid "GEOM_BUT_CLOSE"
26 msgid "GEOM_BUT_CANCEL"
47 msgid "GEOM_BUT_EXPLODE"
51 #==============================================================================
54 #: GeometryGUI.cxx:563
55 msgid "GEOM_INF_LOADED"
56 msgstr "Le fichier %1 est chargé."
59 #==============================================================================
62 #: GeometryGUI.cxx:3069
63 msgid "GEOM_PRP_COMMAND"
64 msgstr "Pas de commande associée à l'id = %1."
66 #: GeometryGUI.cxx:4977
67 msgid "GEOM_PRP_ABORT"
68 msgstr "L'opération a echoué"
70 #: GeometryGUI.cxx:5058
72 msgstr "Opération effectuée"
74 #: GeometryGUI.cxx:3717
75 msgid "GEOM_PRP_LOADING"
76 msgstr "Chargement de %1 ..."
78 #: GeometryGUI.cxx:1412
79 msgid "GEOM_PRP_NULLSHAPE"
80 msgstr "Erreur, objet inconsistant ou inapproprié !"
82 #: GeometryGUI.cxx:5072
83 msgid "GEOM_PRP_READY"
86 #: GeometryGUI.cxx:1690
87 msgid "GEOM_PRP_SELECT_SUBSHAPES"
88 msgstr "Selection de sous objets"
91 msgstr "Confirmer cette operation"
93 msgid "GEOM_CONFIRM_INFO"
94 msgstr "L'objet contient %1 sous objets"
97 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
98 msgstr "Non permis dans viewer VTK"
100 #: GeometryGUI.cxx:1690
101 msgid "GEOM_PRP_SHAPE_IN_STUDY"
102 msgstr "La shape principale doit etre avant dans l'etude"
104 #: GeometryGUI.cxx:1690
105 msgid "GEOM_PRP_SELECT_EDGE"
106 msgstr "Selectionner les edges et clicker sur Apply"
108 #: GeometryGUI.cxx:1690
109 msgid "GEOM_PRP_SELECT_FACE"
110 msgstr "Select les faces a supprimer et clicker sur Ok/Apply"
112 #: GeometryGUI.cxx:1690
113 msgid "GEOM_PRP_SELECT_FIRST"
114 msgstr "Selectionner la shape principale en premier"
116 #: GeometryGUI.cxx:1690
117 msgid "GEOM_PRP_MIN_DIST"
118 msgstr "Min Distance non calculer"
121 #==============================================================================
124 #: GeometryGUI.cxx:3698
125 msgid "GEOM_MEN_ALL_FILES"
126 msgstr "Tous fichiers ( * )"
128 #: GeometryGUI.cxx:4389
129 msgid "GEOM_MEN_ANGLE"
132 #: GeometryGUI.cxx:3941
133 msgid "GEOM_MEN_COMPONENT"
136 #: GeometryGUI.cxx:4389
137 msgid "GEOM_MEN_ENTER_ANGLE"
138 msgstr "Saisir un angle en degrés"
140 #: GeometryGUI.cxx:3758
141 msgid "GEOM_MEN_EXPORT"
144 #: GeometryGUI.cxx:3648
145 msgid "GEOM_MEN_IMPORT"
148 #: GeometryGUI.cxx:3763
149 msgid "GEOM_MEN_LOAD_SCRIPT"
150 msgstr "Fichiers PYTHON ( *.py )"
152 #: GeometryGUI.cxx:2931
153 msgid "GEOM_MEN_ISOS"
154 msgstr "Choisir un nombre d'isos"
156 #: GeometryGUI.cxx:4278
157 msgid "GEOM_MEN_POPUP_NAME"
160 #: GeometryGUI.cxx:4414
161 msgid "GEOM_MEN_SKETCHER_X"
162 msgstr "Saisir une longueur pour fixer X"
164 #: GeometryGUI.cxx:4438
165 msgid "GEOM_MEN_SKETCHER_Y"
166 msgstr "Saisir une longueur pour fixer Y"
168 #: GeometryGUI.cxx:2898
169 msgid "GEOM_MEN_TRANSPARENCY"
170 msgstr "Transparence"
172 #: GeometryGUI.cxx:4413
176 #: GeometryGUI.cxx:4437
180 #: GeometryGUI_NbIsosDlg.cxx:36
181 msgid "GEOM_MEN_ISOU"
184 #: GeometryGUI_NbIsosDlg.cxx:53
185 msgid "GEOM_MEN_ISOV"
188 #: GeometryGUI_TransparencyDlg.cxx:31
189 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
190 msgstr "Transparence :"
192 msgid "GEOM_MEN_STEP_LABEL"
195 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
196 msgstr "Noms identiques : selectionner avec la souris !"
198 msgid "GEOM_NAME_INCORRECT"
199 msgstr "Le nom saisi n'existe pas"
204 #==============================================================================
207 #: GeometryGUI.cxx:892
208 msgid "GEOM_WRN_RADIUS_NULL"
209 msgstr "Le rayon est nul"
211 #: GeometryGUI.cxx:3854
212 msgid "GEOM_WRN_WARNING"
213 msgstr "Avertissement"
215 #: GeometryGUI.cxx:3854
216 msgid "GEOM_REALLY_DELETE"
217 msgstr "Voulez-vous supprimer l'object(s) ?"
220 #==============================================================================
228 msgid "GEOM_MAIN_OBJECT"
229 msgstr "Objet Principal"
232 msgid "GEOM_TOOL_OBJECT"
236 msgid "GEOM_BASE_OBJECT"
237 msgstr "Objet De Base"
240 msgid "GEOM_PATH_OBJECT"
241 msgstr "Objet Chemin"
248 msgid "GEOM_OBJECT_I"
252 msgid "GEOM_OBJECT_RESULT"
253 msgstr "Objet Et Résultat"
260 msgid "GEOM_BASE_POINT"
261 msgstr "Point De Base"
264 msgid "GEOM_CENTER_POINT"
265 msgstr "Point Centre"
268 msgid "GEOM_DIAGONAL_POINTS"
269 msgstr "Points Diagonaux"
272 msgid "GEOM_CENTRAL_POINT"
273 msgstr "Point Central"
284 msgid "GEOM_ARGUMENTS"
296 msgid "GEOM_RADIUS_I"
312 msgid "GEOM_COORDINATES"
324 msgid "GEOM_REVERSE_U"
328 msgid "GEOM_REVERSE_V"
344 msgid "GEOM_VECTOR_LENGTH"
345 msgstr "Longueur Du Vecteur :"
348 msgid "GEOM_REVERSE_VECTOR"
349 msgstr "Renverser Le Vecteur"
352 msgid "GEOM_POINT_MIRROR"
353 msgstr "Point Miroir"
356 msgid "GEOM_AXE_MIRROR"
360 msgid "GEOM_PLANE_MIRROR"
364 msgid "GEOM_FACE_SELECTION"
365 msgstr "Selection de Face"
372 msgid "GEOM_WATER_DENSITY"
373 msgstr "Densité de l'eau :"
376 msgid "GEOM_MESHING_DEFLECTION"
377 msgstr "Déflection Du Maillage :"
380 msgid "GEOM_DIMENSIONS"
384 msgid "GEOM_PRECISION"
388 msgid "GEOM_SELECTION"
392 msgid "GEOM_NB_TIMES"
396 msgid "GEOM_NB_TIMES_U"
397 msgstr "Nb. Fois U :"
400 msgid "GEOM_NB_TIMES_V"
401 msgstr "Nb. Fois V :"
416 #==============================================================================
420 msgid "GEOM_PARTITION"
423 #Half-space partition
424 msgid "GEOM_PARTITION_HALFSPACE"
425 msgstr "Half-space partition"
428 msgid "GEOM_TOLERANCE"
432 msgid "GEOM_ORIENTATION"
440 msgid "GEOM_REVOLUTION"
444 msgid "GEOM_ROTATION"
448 msgid "GEOM_ARCHIMEDE"
460 msgid "GEOM_DISTANCE"
465 msgstr "Surface Par Courbes"
484 msgid "GEOM_TRANSLATION"
489 msgstr "Plan de Travail"
500 msgid "GEOM_SUB_SHAPE"
504 msgid "GEOM_SUPRESSFACE"
505 msgstr "Supression de Face"
516 msgid "GEOM_CHECK_SHAPE"
525 msgstr "Boite Anglobante"
529 msgstr "Centre de Masse"
532 msgid "GEOM_PROPERTIES"
533 msgstr "Basiques Proprietes"
536 msgid "GEOM_MULTITRANSLATION"
537 msgstr "Multi-Translation"
540 msgid "GEOM_MULTIROTATION"
541 msgstr "Multi-Rotation"
544 #==============================================================================
563 msgid "GEOM_ELLIPSE_TITLE"
564 msgstr "Construction d'Ellipses"
567 msgid "GEOM_RADIUS_MAJOR"
568 msgstr "Rayon max. :"
571 msgid "GEOM_RADIUS_MINOR"
572 msgstr "Rayon min. :"
575 msgid "GEOM_COMPOUND"
579 msgid "GEOM_COMPOUNDSOLID"
587 msgid "GEOM_CYLINDER"
631 msgid "GEOM_SURFCONE"
632 msgstr "Face Conique"
635 msgid "GEOM_SURFCYLINDER"
636 msgstr "Face Cylindrique"
639 msgid "GEOM_SURFSPHERE"
640 msgstr "Face Sphèrique"
643 msgid "GEOM_SURFTORUS"
644 msgstr "Face Toroique"
655 msgid "GEOM_VECTOR_U"
659 msgid "GEOM_VECTOR_V"
675 msgid "GEOM_PARAMETER"
680 #==============================================================================
724 #==============================================================================
728 msgid "GEOM_STEP_TITLE"
729 msgstr "Increment par défaut lors des constructions"
731 #: GeometryGUI_ArcDlg.cxx:45
732 msgid "GEOM_ARC_TITLE"
733 msgstr "Construction d'un Arc"
735 #: GeometryGUI_ArchimedeDlg.cxx:55
736 msgid "GEOM_ARCHIMEDE_TITLE"
737 msgstr "Construction d'Archimède"
739 #: GeometryGUI_BndBoxDlg.cxx:59
740 msgid "GEOM_BNDBOX_TITLE"
741 msgstr "Boite Englobante"
743 #: GeometryGUI_BndBoxDlg.cxx:82
744 msgid "GEOM_BNDBOX_OBJDIM"
745 msgstr "Objet and ses dimensions"
747 #: GeometryGUI_BoxDlg.cxx:50
748 msgid "GEOM_BOX_TITLE"
749 msgstr "Construction d'une Boite"
751 #: GeometryGUI_BoxDlg.cxx:50
753 msgstr "Dimensions A l'Origine"
755 #: GeometryGUI_ChamferDlg.cxx:58
756 msgid "GEOM_CHAMFER_TITLE"
757 msgstr "Construction d'un Chanfrein"
759 #: GeometryGUI_ChamferDlg.cxx:58
760 msgid "GEOM_CHAMFER_ALL"
761 msgstr "Chanfrein sur toute la Shape"
763 #: GeometryGUI_ChamferDlg.cxx:58
764 msgid "GEOM_CHAMFER_EDGES"
765 msgstr "Chanfrein sur Edges de la Shape"
767 #: GeometryGUI_ChamferDlg.cxx:58
768 msgid "GEOM_CHAMFER_FACES"
769 msgstr "Chanfrein sur Faces de la Shape"
771 #: GeometryGUI_CircleDlg.cxx:48
772 msgid "GEOM_CIRCLE_TITLE"
773 msgstr "Construction d'un Cercle"
775 #: GeometryGUI_CenterMassDlg.cxx:77
776 msgid "GEOM_CMASS_TITLE"
777 msgstr "Centre De Gravité"
779 msgid "GEOM_PLANE_SIZE"
780 msgstr "Taille du plan :"
782 #: GeometryGUI_CommonDlg.cxx:47
783 msgid "GEOM_COMMON_TITLE"
784 msgstr "BOOLEEN : Jonction De Deux Objets"
786 #: GeometryGUI_CompoundDlg.cxx:44
787 msgid "GEOM_COMPOUND_TITLE"
788 msgstr "Création d'un Compound"
790 #: GeometryGUI_ConeDlg.cxx:49
791 msgid "GEOM_CONE_TITLE"
792 msgstr "Construction d'un Cone"
794 #: GeometryGUI_CutDlg.cxx:48
795 msgid "GEOM_CUT_TITLE"
796 msgstr "BOOLEEN : Couper Deux Objets"
798 #: GeometryGUI_CylinderDlg.cxx:47
799 msgid "GEOM_CYLINDER_TITLE"
800 msgstr "Construction d'un Cylindre"
802 #: GeometryGUI_CheckShape.cxx:60
803 msgid "GEOM_CHECK_TITLE"
806 #: GeometryGUI_CheckShape.cxx:83
807 msgid "GEOM_CHECK_INFOS"
808 msgstr "Objet et ses Informations Topologiques"
810 #: GeometryGUI_DistanceDlg.cxx:57
811 msgid "GEOM_MINDIST_TITLE"
812 msgstr "Distance Minimale entre Deux Objets"
814 #: GeometryGUI_DistanceDlg.cxx:57
815 msgid "GEOM_MINDIST_OBJ"
816 msgstr "Objets Et Resultats"
818 #: GeometryGUI_EdgeDlg.cxx:47
819 msgid "GEOM_EDGE_TITLE"
820 msgstr "Création d'un Edge"
822 #: GeometryGUI_FilletDlg.cxx:58
823 msgid "GEOM_FILLET_TITLE"
824 msgstr "Construction d'un Congé"
826 #: GeometryGUI_FilletDlg.cxx:58
827 msgid "GEOM_FILLET_ALL"
828 msgstr "Congé sur toute la Shape"
830 #: GeometryGUI_FilletDlg.cxx:58
831 msgid "GEOM_FILLET_EDGES"
832 msgstr "Congé sur Edges de la Shape"
834 #: GeometryGUI_FilletDlg.cxx:58
835 msgid "GEOM_FILLET_FACES"
836 msgstr "Congé sur Faces de la Shape"
838 #: GeometryGUI_FaceDlg.cxx:49
839 msgid "GEOM_FACE_TITLE"
840 msgstr "Création d'une Face"
842 #: GeometryGUI_FaceDlg.cxx:78
843 msgid "GEOM_FACE_FFW"
844 msgstr "Face a partir d'un wire"
846 #: GeometryGUI_FaceDlg.cxx:103
847 msgid "GEOM_FACE_OPT"
848 msgstr "Création d'une Face plane"
850 #: GeometryGUI_FillingDlg.cxx:53
851 msgid "GEOM_FILLING_TITLE"
852 msgstr "Surface Par Courbes"
854 #: GeometryGUI_FillingDlg.cxx:112
855 msgid "GEOM_FILLING_ARG"
856 msgstr "Argument Et Parametres"
858 #: GeometryGUI_FillingDlg.cxx:128
859 msgid "GEOM_FILLING_MIN_DEG"
862 #: GeometryGUI_FillingDlg.cxx:142
863 msgid "GEOM_FILLING_MAX_DEG"
866 #: GeometryGUI_FillingDlg.cxx:150
867 msgid "GEOM_FILLING_TOL_2D"
870 #: GeometryGUI_FillingDlg.cxx:170
871 msgid "GEOM_FILLING_COMPOUND"
872 msgstr "Compound de Courbes"
874 #: GeometryGUI_FillingDlg.cxx:184
875 msgid "GEOM_FILLING_TOL_3D"
878 #: GeometryGUI_FillingDlg.cxx:192
879 msgid "GEOM_FILLING_NB_ITER"
882 #: GeometryGUI_FuseDlg.cxx:48
883 msgid "GEOM_FUSE_TITLE"
884 msgstr "BOOLEEN : Fusionner deux Objets"
886 #: GeometryGUI_InertiaDlg.cxx:42
887 msgid "GEOM_INERTIA_TITLE"
888 msgstr "Calculs d'Inertie"
890 #: GeometryGUI_InertiaDlg.cxx:50
891 msgid "GEOM_INERTIA_CONSTR"
892 msgstr "Matrice Et Moments d'Inertie"
894 #: GeometryGUI_InertiaDlg.cxx:100
895 msgid "GEOM_INERTIA_I"
898 #: GeometryGUI_InertiaDlg.cxx:182
899 msgid "GEOM_INERTIA_IXYZ"
900 msgstr "IX & IY & IZ"
902 #: GeometryGUI_LineDlg.cxx:50
903 msgid "GEOM_LINE_TITLE"
904 msgstr "Construction d'une Ligne"
906 #: GeometryGUI_MaxToleranceDlg.cxx:53
907 msgid "GEOM_TOLERANCE_TITLE"
908 msgstr "Tolerance Maximale"
910 #: GeometryGUI_MaxToleranceDlg.cxx:84
911 msgid "GEOM_TOLERANCE_CONSTR"
912 msgstr "Object et ses Tolerances"
914 #: GeometryGUI_MaxToleranceDlg.cxx:121
915 msgid "GEOM_TOLERANCE_FACE"
918 #: GeometryGUI_MaxToleranceDlg.cxx:138
919 msgid "GEOM_TOLERANCE_EDGE"
922 #: GeometryGUI_MaxToleranceDlg.cxx:155
923 msgid "GEOM_TOLERANCE_VERTEX"
926 #: GeometryGUI_MirrorDlg.cxx:52
927 msgid "GEOM_MIRROR_TITLE"
928 msgstr "Methode Miroir"
930 #: GeometryGUI_OrientationDlg.cxx:46
931 msgid "GEOM_ORIENTATION_TITLE"
932 msgstr "Changer l'Orientation"
934 #: GeometryGUI_OrientationDlg.cxx:134
935 msgid "GEOM_ORIENTATION_OPT"
936 msgstr "Renverser l'orientation avec une simulation de vecteur normal"
938 #: GeometryGUI_PartitionDlg.cxx:45
939 msgid "GEOM_PARTITION_TITLE"
940 msgstr "Partition d'Objects Avec Outils"
942 #: GeometryGUI_PartitionDlg.cxx:45
943 msgid "GEOM_KEEP_OBJECT"
946 #: GeometryGUI_PartitionDlg.cxx:45
947 msgid "GEOM_PARTITION_ORIENTATION"
948 msgstr "Change l'orientation"
950 #: GeometryGUI_PartitionDlg.cxx:45
951 msgid "SUPPRESS_RESULT"
952 msgstr "Suppress Result"
954 msgid "GEOM_REMOVE_WEBS"
957 msgid "GEOM_SET_MATERIALS"
958 msgstr "Set materials"
960 #: OperationGUI_MaterialDlg.cxx:45
961 msgid "GEOM_MATERIAL_TITLE"
962 msgstr "Define materials for Dominant Fuse"
964 msgid "GEOM_MATERIAL_SHAPE"
967 msgid "GEOM_MATERIAL_MATERIAL"
970 msgid "GEOM_MATERIAL_ID"
971 msgstr "Material ID:"
973 msgid "GEOM_MATERIAL_SET"
976 #: GeometryGUI_PipeDlg.cxx:47
977 msgid "GEOM_PIPE_TITLE"
978 msgstr "Construction d'une Pipe"
980 #: GeometryGUI_PointDlg.cxx:52
981 msgid "GEOM_POINT_TITLE"
982 msgstr "Construction d'un Point"
984 #: GeometryGUI_PlaneDlg.cxx:60
985 msgid "GEOM_PLANE_TITLE"
986 msgstr "Construction d'un Plan"
988 #: GeometryGUI_PlaneDlg.cxx:172
989 msgid "GEOM_PLANE_PVC"
990 msgstr "Point + Vecteur Coordonnes"
992 #: GeometryGUI_PlaneDlg.cxx:133
993 msgid "GEOM_PLANE_PV"
994 msgstr "Point + Vecteur"
996 #: GeometryGUI_PrismDlg.cxx:54
997 msgid "GEOM_PRISM_TITLE"
998 msgstr "Extruder une Shape de base"
1000 #: GeometryGUI_PrismDlg.cxx:83
1001 msgid "GEOM_PRISM_BSV"
1002 msgstr "Shape de base + Vecteur"
1004 #: GeometryGUI_PropertiesDlg.cxx:56
1005 msgid "GEOM_PROPERTIES_TITLE"
1006 msgstr "Proprietes Basiques"
1008 #: GeometryGUI_PropertiesDlg.cxx:78
1009 msgid "GEOM_PROPERTIES_CONSTR"
1010 msgstr "Objet et ses Proprietes"
1012 #: GeometryGUI_PropertiesDlg.cxx:114
1013 msgid "GEOM_PROPERTIES_SURFACE"
1016 #: GeometryGUI_PropertiesDlg.cxx:120
1017 msgid "GEOM_PROPERTIES_VOLUME"
1020 #: GeometryGUI_RevolDlg.cxx:49
1021 msgid "GEOM_REVOLUTION_TITLE"
1022 msgstr "Construction Par Revolution"
1024 #: GeometryGUI_RotationDlg.cxx:51
1025 msgid "GEOM_ROTATION_TITLE"
1026 msgstr "Rotation d'un Objet"
1028 #: GeometryGUI_ScaleDlg.cxx:52
1029 msgid "GEOM_SCALE_TITLE"
1030 msgstr "Echelle d'un Objet"
1032 #: GeometryGUI_ScaleDlg.cxx:117
1033 msgid "GEOM_SCALE_FACTOR"
1034 msgstr "Facteur d'echelle"
1036 #: GeometryGUI_SectionDlg.cxx:50
1037 msgid "GEOM_SECTION_TITLE"
1038 msgstr "BOOLEEN : Section De Deux Objets"
1040 #: GeometryGUI_SewingDlg.cxx:48
1041 msgid "GEOM_SEWING_TITLE"
1042 msgstr "Coudre des Topologies"
1044 #: GeometryGUI_ShellDlg.cxx:53
1045 msgid "GEOM_SHELL_TITLE"
1046 msgstr "Construction d'une Shell"
1048 #: GeometryGUI_SolidDlg.cxx:74
1049 msgid "GEOM_SOLID_TITLE"
1050 msgstr "Construction d'un Solid"
1052 #: GeometryGUI_SphereDlg.cxx:50
1053 msgid "GEOM_SPHERE_TITLE"
1054 msgstr "Construction d'une Sphere"
1056 #: GeometryGUI_SphereDlg.cxx:113
1057 msgid "GEOM_SPHERE_CR"
1058 msgstr "Centre + rayon"
1060 #: GeometryGUI_SphereDlg.cxx:146
1061 msgid "GEOM_SPHERE_RO"
1062 msgstr "Rayon a l'origine"
1064 #: GeometryGUI_SubShapeDlg.cxx:55
1065 msgid "GEOM_SUBSHAPE_TITLE"
1066 msgstr "Selection de Sous Shapes"
1068 #: GeometryGUI_SubShapeDlg.cxx:131
1069 msgid "GEOM_SUBSHAPE_TYPE"
1070 msgstr "Type de Sous Shapes"
1072 #: GeometryGUI_SubShapeDlg.cxx:137
1073 msgid "GEOM_SUBSHAPE_SELECT"
1074 msgstr "Selectionner de Sous Shapes"
1076 #: GeometryGUI_TorusDlg.cxx:51
1077 msgid "GEOM_TORUS_TITLE"
1078 msgstr "Constructiond'un Tore"
1080 #: GeometryGUI_SuppressFacesDlg.cxx:103
1081 msgid "GEOM_SUPRESSFACE_TITLE"
1082 msgstr "Supprimer des Faces dans un Objet"
1084 #: GeometryGUI_SuppressFacesDlg.cxx:164
1085 msgid "GEOM_SUPRESSFACE_SELECT"
1086 msgstr "Selectionner les Faces a Supprimer"
1088 #: GeometryGUI_TranslationDlg.cxx:78
1089 msgid "GEOM_TRANSLATION_COOR"
1090 msgstr "Translation Avec Coordonnees"
1092 msgid "GEOM_TRANSPARENCY_TITLE"
1093 msgstr "Transparence"
1095 msgid "GEOM_TRANSPARENCY_OPAQUE"
1098 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1099 msgstr "Transparent"
1101 msgid "GEOM_SUPPRESSHOLE_TITLE"
1102 msgstr "Suppression de trous"
1104 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1105 msgstr "Selection de la face initiale"
1107 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1108 msgstr "Selection du contour/trou sur la face"
1110 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1111 msgstr "Selection de la face terminale (si trou traversant)"
1113 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1114 msgstr "Selection de contour final (si trou traversant)"
1116 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1117 msgstr "Face ou shell"
1119 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1120 msgstr "Selection de trou(s) sur la face"
1122 #: GeometryGUI_TranslationDlg.cxx:56
1123 msgid "GEOM_TRANSLATION_TITLE"
1124 msgstr "Translation d'un Objet"
1126 #: GeometryGUI_VectorDlg.cxx:54
1127 msgid "GEOM_VECTOR_TITLE"
1128 msgstr "Construction d'un Vecteur"
1130 #: GeometryGUI_WhatisDlg.cxx:63
1131 msgid "GEOM_WHATIS_TITLE"
1134 #: GeometryGUI_WhatisDlg.cxx:86
1135 msgid "GEOM_WHATIS_OBJECT"
1136 msgstr "Objet et ses Informations Topologiques"
1138 #: GeometryGUI_WireDlg.cxx:46
1139 msgid "GEOM_WIRE_TITLE"
1140 msgstr "Creer un Wire"
1142 #: GeometryGUI_WireDlg.cxx:103
1143 msgid "GEOM_WIRE_CONNECT"
1144 msgstr "Creation d'un Wire a partir de wires/edges connectes"
1146 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1147 msgid "GEOM_WPLANE_TITLE"
1148 msgstr "plan de travail"
1150 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1151 msgid "GEOM_WPLANE_FACE"
1152 msgstr "Plan Ou Face plane"
1154 #: GeometryGUI_multiTranslationDlg.cxx:107
1155 msgid "GEOM_MULTITRANSLATION_TITLE"
1156 msgstr "Multi-Translation"
1158 #: GeometryGUI_multiTranslationDlg.cxx:107
1159 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1160 msgstr "Multi Translation Simple"
1162 #: GeometryGUI_multiTranslationDlg.cxx:107
1163 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1164 msgstr "Multi Translation Double"
1166 #: GeometryGUI_multiRotationDlg.cxx:107
1167 msgid "GEOM_MULTIROTATION_TITLE"
1168 msgstr "Multi-Rotation"
1170 #: GeometryGUI_multiRotationDlg.cxx:107
1171 msgid "GEOM_MULTIROTATION_SIMPLE"
1172 msgstr "Multi Rotation Simple"
1174 #: GeometryGUI_multiRotationDlg.cxx:107
1175 msgid "GEOM_MULTIROTATION_DOUBLE"
1176 msgstr "Multi Rotation Double"
1178 msgid "GEOM_PARAM_POINT"
1179 msgstr "Point paramétrique"
1182 #==============================================================================
1185 #: GeometryGUI.cxx:4613
1186 msgid "GEOM_MEN_WIREFRAME"
1189 #: GeometryGUI.cxx:4613
1190 msgid "GEOM_MEN_SHADING"
1193 msgid "GEOM_RECONSTRUCTION_LIMIT"
1194 msgstr "Limite de Reconstruction"
1196 msgid "GEOM_SUPPRESS_RESULT"
1197 msgstr "Supprimer le Resultat"
1199 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1202 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1205 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1207 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1209 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1211 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1213 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1215 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1217 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1220 msgid "GEOM_SPLINE_TITLE"
1221 msgstr "Construction de Splines"
1226 msgid "GEOM_INTERPOL"
1227 msgstr "Interpolation"
1230 #==============================================================================
1233 msgid "GEOM_SKETCHER_EL"
1234 msgstr "Type d'Element"
1236 msgid "GEOM_BUT_CLOSE_SKETCH"
1237 msgstr "Fermer Sketch"
1239 msgid "GEOM_BUT_END_SKETCH"
1240 msgstr "Terminer Sketch"
1242 msgid "GEOM_SKETCHER_TITLE"
1243 msgstr "Construction de Sketch"
1245 msgid "GEOM_SKETCHER_POINT"
1248 msgid "GEOM_SKETCHER_SEGMENT"
1251 msgid "GEOM_SKETCHER_ARC"
1254 msgid "GEOM_SKETCHER_DIR"
1257 msgid "GEOM_SKETCHER_POINT2"
1260 msgid "GEOM_SKETCHER_DEST"
1261 msgstr "Destination"
1263 msgid "GEOM_SKETCHER_ABS"
1266 msgid "GEOM_SKETCHER_REL"
1269 msgid "GEOM_SKETCHER_SEL"
1272 msgid "GEOM_SKETCHER_ANGLE"
1275 msgid "GEOM_SKETCHER_PER"
1276 msgstr "Perpendiculaire"
1278 msgid "GEOM_SKETCHER_TAN"
1281 msgid "GEOM_SKETCHER_VXVY"
1284 msgid "GEOM_SKETCHER_LENGTH"
1287 msgid "GEOM_SKETCHER_X"
1290 msgid "GEOM_SKETCHER_Y"
1293 msgid "GEOM_SKETCHER_X2"
1296 msgid "GEOM_SKETCHER_Y2"
1299 msgid "GEOM_SKETCHER_X3"
1302 msgid "GEOM_SKETCHER_Y3"
1305 msgid "GEOM_SKETCHER_DX2"
1308 msgid "GEOM_SKETCHER_DY2"
1311 msgid "GEOM_SKETCHER_VX2"
1314 msgid "GEOM_SKETCHER_VY2"
1317 msgid "GEOM_SKETCHER_LENGTH2"
1320 msgid "GEOM_SKETCHER_ANGLE2"
1323 msgid "GEOM_SKETCHER_RADIUS2"
1326 msgid "GEOM_SKETCHER_UNDO"
1329 msgid "GEOM_SKETCHER_APPLY"
1332 msgid "GEOM_SKETCHER_VALUES"
1335 msgid "GEOM_SKETCHER_TYPE"
1338 msgid "GEOM_FILLET_ABORT"
1339 msgstr "Le congé ne peut-être realisé avec un rayon de %1 "
1341 msgid "GEOM_CHAMFER_ABORT"
1342 msgstr "Le chanfrein ne peut-être realisé avec %1 et %2 "
1344 #MZN: to be translated
1345 msgid "GEOM_CREATE_COPY"
1346 msgstr "Create a copy"
1348 #MZN: to be translated
1349 msgid "GEOM_CREATE_SINGLE_SOLID"
1350 msgstr "Create a single solid"