1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: YYYY-MM-DD\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
66 msgid "GEOM_BUT_EXPLODE"
70 #==============================================================================
73 #: GeometryGUI.cxx:563
74 msgid "GEOM_INF_LOADED"
75 msgstr "Le fichier %1 est chargé."
78 #==============================================================================
81 #: GeometryGUI.cxx:3069
82 msgid "GEOM_PRP_COMMAND"
83 msgstr "Pas de commande associée à l'id = %1."
85 #: GeometryGUI.cxx:4977
86 msgid "GEOM_PRP_ABORT"
87 msgstr "L'opération a echoué"
89 #: GeometryGUI.cxx:5058
91 msgstr "Opération effectuée"
93 #: GeometryGUI.cxx:3717
94 msgid "GEOM_PRP_LOADING"
95 msgstr "Chargement de %1 ..."
97 #: GeometryGUI.cxx:1412
98 msgid "GEOM_PRP_NULLSHAPE"
99 msgstr "Erreur, objet inconsistant ou inapproprié !"
101 #: GeometryGUI.cxx:5072
102 msgid "GEOM_PRP_READY"
105 #: GeometryGUI.cxx:1690
106 msgid "GEOM_PRP_SELECT_SUBSHAPES"
107 msgstr "Selection de sous objets"
110 msgstr "Confirmer cette operation"
112 msgid "GEOM_CONFIRM_INFO"
113 msgstr "L'objet contient %1 sous objets"
116 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
117 msgstr "Non permis dans viewer VTK"
119 #: GeometryGUI.cxx:1690
120 msgid "GEOM_PRP_SHAPE_IN_STUDY"
121 msgstr "La shape principale doit etre avant dans l'etude"
123 #: GeometryGUI.cxx:1690
124 msgid "GEOM_PRP_SELECT_EDGE"
125 msgstr "Selectionner les edges et clicker sur Apply"
127 #: GeometryGUI.cxx:1690
128 msgid "GEOM_PRP_SELECT_FACE"
129 msgstr "Select les faces a supprimer et clicker sur Ok/Apply"
131 #: GeometryGUI.cxx:1690
132 msgid "GEOM_PRP_SELECT_FIRST"
133 msgstr "Selectionner la shape principale en premier"
135 #: GeometryGUI.cxx:1690
136 msgid "GEOM_PRP_MIN_DIST"
137 msgstr "Min Distance non calculer"
140 #==============================================================================
143 #: GeometryGUI.cxx:3698
144 msgid "GEOM_MEN_ALL_FILES"
145 msgstr "Tous fichiers ( * )"
147 #: GeometryGUI.cxx:4389
148 msgid "GEOM_MEN_ANGLE"
151 #: GeometryGUI.cxx:3941
152 msgid "GEOM_MEN_COMPONENT"
155 #: GeometryGUI.cxx:4389
156 msgid "GEOM_MEN_ENTER_ANGLE"
157 msgstr "Saisir un angle en degrés"
159 #: GeometryGUI.cxx:3758
160 msgid "GEOM_MEN_EXPORT"
163 #: GeometryGUI.cxx:3648
164 msgid "GEOM_MEN_IMPORT"
167 #: GeometryGUI.cxx:3763
168 msgid "GEOM_MEN_LOAD_SCRIPT"
169 msgstr "Fichiers PYTHON ( *.py )"
171 #: GeometryGUI.cxx:2931
172 msgid "GEOM_MEN_ISOS"
173 msgstr "Choisir un nombre d'isos"
175 #: GeometryGUI.cxx:4278
176 msgid "GEOM_MEN_POPUP_NAME"
179 #: GeometryGUI.cxx:4414
180 msgid "GEOM_MEN_SKETCHER_X"
181 msgstr "Saisir une longueur pour fixer X"
183 #: GeometryGUI.cxx:4438
184 msgid "GEOM_MEN_SKETCHER_Y"
185 msgstr "Saisir une longueur pour fixer Y"
187 #: GeometryGUI.cxx:2898
188 msgid "GEOM_MEN_TRANSPARENCY"
189 msgstr "Transparence"
191 #: GeometryGUI.cxx:4413
195 #: GeometryGUI.cxx:4437
199 #: GeometryGUI_NbIsosDlg.cxx:36
200 msgid "GEOM_MEN_ISOU"
203 #: GeometryGUI_NbIsosDlg.cxx:53
204 msgid "GEOM_MEN_ISOV"
207 #: GeometryGUI_TransparencyDlg.cxx:31
208 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
209 msgstr "Transparence :"
211 msgid "GEOM_MEN_STEP_LABEL"
214 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
215 msgstr "Noms identiques : selectionner avec la souris !"
217 msgid "GEOM_NAME_INCORRECT"
218 msgstr "Le nom saisi n'existe pas"
223 #==============================================================================
226 #: GeometryGUI.cxx:892
227 msgid "GEOM_WRN_RADIUS_NULL"
228 msgstr "Le rayon est nul"
230 #: GeometryGUI.cxx:3854
231 msgid "GEOM_WRN_WARNING"
232 msgstr "Avertissement"
234 #: GeometryGUI.cxx:3854
235 msgid "GEOM_REALLY_DELETE"
236 msgstr "Voulez-vous supprimer l'object(s) ?"
239 #==============================================================================
247 msgid "GEOM_MAIN_OBJECT"
248 msgstr "Objet Principal"
251 msgid "GEOM_TOOL_OBJECT"
255 msgid "GEOM_BASE_OBJECT"
256 msgstr "Objet De Base"
259 msgid "GEOM_PATH_OBJECT"
260 msgstr "Objet Chemin"
267 msgid "GEOM_OBJECT_I"
271 msgid "GEOM_OBJECT_RESULT"
272 msgstr "Objet Et Résultat"
279 msgid "GEOM_BASE_POINT"
280 msgstr "Point De Base"
283 msgid "GEOM_CENTER_POINT"
284 msgstr "Point Centre"
287 msgid "GEOM_DIAGONAL_POINTS"
288 msgstr "Points Diagonaux"
291 msgid "GEOM_CENTRAL_POINT"
292 msgstr "Point Central"
303 msgid "GEOM_ARGUMENTS"
315 msgid "GEOM_RADIUS_I"
331 msgid "GEOM_COORDINATES"
343 msgid "GEOM_REVERSE_U"
347 msgid "GEOM_REVERSE_V"
363 msgid "GEOM_VECTOR_LENGTH"
364 msgstr "Longueur Du Vecteur :"
367 msgid "GEOM_REVERSE_VECTOR"
368 msgstr "Renverser Le Vecteur"
371 msgid "GEOM_POINT_MIRROR"
372 msgstr "Point Miroir"
375 msgid "GEOM_AXE_MIRROR"
379 msgid "GEOM_PLANE_MIRROR"
383 msgid "GEOM_FACE_SELECTION"
384 msgstr "Selection de Face"
391 msgid "GEOM_WATER_DENSITY"
392 msgstr "Densité de l'eau :"
395 msgid "GEOM_MESHING_DEFLECTION"
396 msgstr "Déflection Du Maillage :"
399 msgid "GEOM_DIMENSIONS"
403 msgid "GEOM_PRECISION"
407 msgid "GEOM_SELECTION"
411 msgid "GEOM_NB_TIMES"
415 msgid "GEOM_NB_TIMES_U"
416 msgstr "Nb. Fois U :"
419 msgid "GEOM_NB_TIMES_V"
420 msgstr "Nb. Fois V :"
435 #==============================================================================
439 msgid "GEOM_PARTITION"
442 #Half-space partition
443 msgid "GEOM_PARTITION_HALFSPACE"
444 msgstr "Half-space partition"
447 msgid "GEOM_TOLERANCE"
451 msgid "GEOM_ORIENTATION"
459 msgid "GEOM_REVOLUTION"
463 msgid "GEOM_ROTATION"
467 msgid "GEOM_ARCHIMEDE"
479 msgid "GEOM_DISTANCE"
484 msgstr "Surface Par Edges"
503 msgid "GEOM_TRANSLATION"
508 msgstr "Plan de Travail"
515 msgid "GEOM_EXTRUSION"
519 msgid "GEOM_SUB_SHAPE"
523 msgid "GEOM_SUPRESSFACE"
524 msgstr "Supression de Face"
535 msgid "GEOM_CHECK_SHAPE"
538 #Check Blocks Compound
539 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
540 msgstr "Check Blocks Compound"
542 #Check Blocks Compound Errors
543 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
546 #Check Blocks Compound Errors
547 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
548 msgstr "The Compound of Blocks has no errors"
550 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
551 msgstr "The Compound of Blocks has errors"
553 #Check Blocks Compound SubShapes
554 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
555 msgstr "Incriminated Sub-Shapes"
563 msgstr "Boite Anglobante"
567 msgstr "Centre de Masse"
570 msgid "GEOM_PROPERTIES"
571 msgstr "Basiques Proprietes"
574 msgid "GEOM_MULTITRANSLATION"
575 msgstr "Multi-Translation"
578 msgid "GEOM_MULTIROTATION"
579 msgstr "Multi-Rotation"
582 #==============================================================================
601 msgid "GEOM_ELLIPSE_TITLE"
602 msgstr "Construction d'Ellipses"
605 msgid "GEOM_RADIUS_MAJOR"
606 msgstr "Rayon max. :"
609 msgid "GEOM_RADIUS_MINOR"
610 msgstr "Rayon min. :"
613 msgid "GEOM_COMPOUND"
617 msgid "GEOM_COMPOUNDSOLID"
625 msgid "GEOM_CYLINDER"
669 msgid "GEOM_SURFCONE"
670 msgstr "Face Conique"
673 msgid "GEOM_SURFCYLINDER"
674 msgstr "Face Cylindrique"
677 msgid "GEOM_SURFSPHERE"
678 msgstr "Face Sphèrique"
681 msgid "GEOM_SURFTORUS"
682 msgstr "Face Toroique"
693 msgid "GEOM_VECTOR_U"
697 msgid "GEOM_VECTOR_V"
713 msgid "GEOM_PARAMETER"
718 #==============================================================================
762 #==============================================================================
766 msgid "GEOM_STEP_TITLE"
767 msgstr "Increment par défaut lors des constructions"
769 #: GeometryGUI_ArcDlg.cxx:45
770 msgid "GEOM_ARC_TITLE"
771 msgstr "Construction d'un Arc"
773 #: GeometryGUI_ArchimedeDlg.cxx:55
774 msgid "GEOM_ARCHIMEDE_TITLE"
775 msgstr "Construction d'Archimède"
777 #: GeometryGUI_BndBoxDlg.cxx:59
778 msgid "GEOM_BNDBOX_TITLE"
779 msgstr "Boite Englobante"
781 #: GeometryGUI_BndBoxDlg.cxx:82
782 msgid "GEOM_BNDBOX_OBJDIM"
783 msgstr "Objet and ses dimensions"
785 #: GeometryGUI_BoxDlg.cxx:50
786 msgid "GEOM_BOX_TITLE"
787 msgstr "Construction d'une Boite"
789 #: GeometryGUI_BoxDlg.cxx:50
791 msgstr "Dimensions A l'Origine"
793 #: GeometryGUI_ChamferDlg.cxx:58
794 msgid "GEOM_CHAMFER_TITLE"
795 msgstr "Construction d'un Chanfrein"
797 #: GeometryGUI_ChamferDlg.cxx:58
798 msgid "GEOM_CHAMFER_ALL"
799 msgstr "Chanfrein sur toute la Shape"
801 #: GeometryGUI_ChamferDlg.cxx:58
802 msgid "GEOM_CHAMFER_EDGES"
803 msgstr "Chanfrein sur Edges de la Shape"
805 #: GeometryGUI_ChamferDlg.cxx:58
806 msgid "GEOM_CHAMFER_FACES"
807 msgstr "Chanfrein sur Faces de la Shape"
809 #: GeometryGUI_CircleDlg.cxx:48
810 msgid "GEOM_CIRCLE_TITLE"
811 msgstr "Construction d'un Cercle"
813 #: GeometryGUI_CenterMassDlg.cxx:77
814 msgid "GEOM_CMASS_TITLE"
815 msgstr "Centre De Gravité"
817 msgid "GEOM_PLANE_SIZE"
818 msgstr "Taille du plan :"
820 #: GeometryGUI_CommonDlg.cxx:47
821 msgid "GEOM_COMMON_TITLE"
822 msgstr "BOOLEEN : Jonction De Deux Objets"
824 #: GeometryGUI_CompoundDlg.cxx:44
825 msgid "GEOM_COMPOUND_TITLE"
826 msgstr "Création d'un Compound"
828 #: GeometryGUI_ConeDlg.cxx:49
829 msgid "GEOM_CONE_TITLE"
830 msgstr "Construction d'un Cone"
832 #: GeometryGUI_CutDlg.cxx:48
833 msgid "GEOM_CUT_TITLE"
834 msgstr "BOOLEEN : Couper Deux Objets"
836 #: GeometryGUI_CylinderDlg.cxx:47
837 msgid "GEOM_CYLINDER_TITLE"
838 msgstr "Construction d'un Cylindre"
840 #: GeometryGUI_CheckShape.cxx:60
841 msgid "GEOM_CHECK_TITLE"
844 #: MeasureGUI_CheckCompoundOfBlocks.cxx:61
845 msgid "GEOM_CHECK_COMPOUND_BLOCKS_TITLE"
846 msgstr "Check Blocks Compound"
848 #: GeometryGUI_CheckShape.cxx:83
849 msgid "GEOM_CHECK_INFOS"
850 msgstr "Objet et ses Informations Topologiques"
852 #: GeometryGUI_DistanceDlg.cxx:57
853 msgid "GEOM_MINDIST_TITLE"
854 msgstr "Distance Minimale entre Deux Objets"
856 #: GeometryGUI_DistanceDlg.cxx:57
857 msgid "GEOM_MINDIST_OBJ"
858 msgstr "Objets Et Resultats"
860 #: GeometryGUI_EdgeDlg.cxx:47
861 msgid "GEOM_EDGE_TITLE"
862 msgstr "Création d'un Edge"
864 #: GeometryGUI_FilletDlg.cxx:58
865 msgid "GEOM_FILLET_TITLE"
866 msgstr "Construction d'un Congé"
868 #: GeometryGUI_FilletDlg.cxx:58
869 msgid "GEOM_FILLET_ALL"
870 msgstr "Congé sur toute la Shape"
872 #: GeometryGUI_FilletDlg.cxx:58
873 msgid "GEOM_FILLET_EDGES"
874 msgstr "Congé sur Edges de la Shape"
876 #: GeometryGUI_FilletDlg.cxx:58
877 msgid "GEOM_FILLET_FACES"
878 msgstr "Congé sur Faces de la Shape"
880 #: GeometryGUI_FaceDlg.cxx:49
881 msgid "GEOM_FACE_TITLE"
882 msgstr "Création d'une Face"
884 #: GeometryGUI_FaceDlg.cxx:78
885 msgid "GEOM_FACE_FFW"
886 msgstr "Face a partir d'un wire"
888 #: GeometryGUI_FaceDlg.cxx:103
889 msgid "GEOM_FACE_OPT"
890 msgstr "Création d'une Face plane"
892 #: GeometryGUI_FillingDlg.cxx:53
893 msgid "GEOM_FILLING_TITLE"
894 msgstr "Surface Par Edges"
896 #: GeometryGUI_FillingDlg.cxx:112
897 msgid "GEOM_FILLING_ARG"
898 msgstr "Argument Et Parametres"
900 #: GeometryGUI_FillingDlg.cxx:128
901 msgid "GEOM_FILLING_MIN_DEG"
904 #: GeometryGUI_FillingDlg.cxx:142
905 msgid "GEOM_FILLING_MAX_DEG"
908 #: GeometryGUI_FillingDlg.cxx:150
909 msgid "GEOM_FILLING_TOL_2D"
912 #: GeometryGUI_FillingDlg.cxx:170
913 msgid "GEOM_FILLING_COMPOUND"
914 msgstr "Compound de Edges"
916 #: GeometryGUI_FillingDlg.cxx:184
917 msgid "GEOM_FILLING_TOL_3D"
920 #: GeometryGUI_FillingDlg.cxx:192
921 msgid "GEOM_FILLING_NB_ITER"
924 #: GeometryGUI_FuseDlg.cxx:48
925 msgid "GEOM_FUSE_TITLE"
926 msgstr "BOOLEEN : Fusionner deux Objets"
928 #: GeometryGUI_InertiaDlg.cxx:42
929 msgid "GEOM_INERTIA_TITLE"
930 msgstr "Calculs d'Inertie"
932 #: GeometryGUI_InertiaDlg.cxx:50
933 msgid "GEOM_INERTIA_CONSTR"
934 msgstr "Matrice Et Moments d'Inertie"
936 #: GeometryGUI_InertiaDlg.cxx:100
937 msgid "GEOM_INERTIA_I"
940 #: GeometryGUI_InertiaDlg.cxx:182
941 msgid "GEOM_INERTIA_IXYZ"
942 msgstr "IX & IY & IZ"
944 #: GeometryGUI_LineDlg.cxx:50
945 msgid "GEOM_LINE_TITLE"
946 msgstr "Construction d'une Ligne"
948 #: GeometryGUI_MaxToleranceDlg.cxx:53
949 msgid "GEOM_TOLERANCE_TITLE"
950 msgstr "Tolerance Maximale"
952 #: GeometryGUI_MaxToleranceDlg.cxx:84
953 msgid "GEOM_TOLERANCE_CONSTR"
954 msgstr "Object et ses Tolerances"
956 #: GeometryGUI_MaxToleranceDlg.cxx:121
957 msgid "GEOM_TOLERANCE_FACE"
960 #: GeometryGUI_MaxToleranceDlg.cxx:138
961 msgid "GEOM_TOLERANCE_EDGE"
964 #: GeometryGUI_MaxToleranceDlg.cxx:155
965 msgid "GEOM_TOLERANCE_VERTEX"
968 #: GeometryGUI_MirrorDlg.cxx:52
969 msgid "GEOM_MIRROR_TITLE"
970 msgstr "Methode Miroir"
972 #: GeometryGUI_OrientationDlg.cxx:46
973 msgid "GEOM_ORIENTATION_TITLE"
974 msgstr "Changer l'Orientation"
976 #: GeometryGUI_OrientationDlg.cxx:134
977 msgid "GEOM_ORIENTATION_OPT"
978 msgstr "Renverser l'orientation avec une simulation de vecteur normal"
980 #: GeometryGUI_PartitionDlg.cxx:45
981 msgid "GEOM_PARTITION_TITLE"
982 msgstr "Partition d'Objects Avec Outils"
984 #: GeometryGUI_PartitionDlg.cxx:45
985 msgid "GEOM_KEEP_OBJECT"
988 #: GeometryGUI_PartitionDlg.cxx:45
989 msgid "GEOM_PARTITION_ORIENTATION"
990 msgstr "Change l'orientation"
992 #: GeometryGUI_PartitionDlg.cxx:45
993 msgid "SUPPRESS_RESULT"
994 msgstr "Suppress Result"
996 msgid "GEOM_REMOVE_WEBS"
999 msgid "GEOM_SET_MATERIALS"
1000 msgstr "Set materials"
1002 #: OperationGUI_MaterialDlg.cxx:45
1003 msgid "GEOM_MATERIAL_TITLE"
1004 msgstr "Define materials for Dominant Fuse"
1006 msgid "GEOM_MATERIAL_SHAPE"
1009 msgid "GEOM_MATERIAL_MATERIAL"
1012 msgid "GEOM_MATERIAL_ID"
1013 msgstr "Material ID:"
1015 msgid "GEOM_MATERIAL_SET"
1018 #: GeometryGUI_PipeDlg.cxx:47
1019 msgid "GEOM_PIPE_TITLE"
1020 msgstr "Construction d'une Pipe"
1022 #: GeometryGUI_PointDlg.cxx:52
1023 msgid "GEOM_POINT_TITLE"
1024 msgstr "Construction d'un Point"
1026 #: GeometryGUI_PlaneDlg.cxx:60
1027 msgid "GEOM_PLANE_TITLE"
1028 msgstr "Construction d'un Plan"
1030 #: GeometryGUI_PlaneDlg.cxx:172
1031 msgid "GEOM_PLANE_PVC"
1032 msgstr "Point + Vecteur Coordonnes"
1034 #: GeometryGUI_PlaneDlg.cxx:133
1035 msgid "GEOM_PLANE_PV"
1036 msgstr "Point + Vecteur"
1038 #: GeometryGUI_PrismDlg.cxx:54
1039 msgid "GEOM_EXTRUSION_TITLE"
1040 msgstr "Extruder une Shape de base"
1042 #: GeometryGUI_PrismDlg.cxx:83
1043 msgid "GEOM_EXTRUSION_BSV"
1044 msgstr "Shape de base + Vecteur"
1046 msgid "GEOM_EXTRUSION_BSV_2P"
1047 msgstr "Shape de base + 2 Points"
1049 #: GeometryGUI_PropertiesDlg.cxx:56
1050 msgid "GEOM_PROPERTIES_TITLE"
1051 msgstr "Proprietes Basiques"
1053 #: GeometryGUI_PropertiesDlg.cxx:78
1054 msgid "GEOM_PROPERTIES_CONSTR"
1055 msgstr "Objet et ses Proprietes"
1057 #: GeometryGUI_PropertiesDlg.cxx:114
1058 msgid "GEOM_PROPERTIES_SURFACE"
1061 #: GeometryGUI_PropertiesDlg.cxx:120
1062 msgid "GEOM_PROPERTIES_VOLUME"
1065 #: GeometryGUI_RevolDlg.cxx:49
1066 msgid "GEOM_REVOLUTION_TITLE"
1067 msgstr "Construction Par Revolution"
1069 #: GeometryGUI_RotationDlg.cxx:51
1070 msgid "GEOM_ROTATION_TITLE"
1071 msgstr "Rotation d'un Objet"
1073 #: GeometryGUI_ScaleDlg.cxx:52
1074 msgid "GEOM_SCALE_TITLE"
1075 msgstr "Echelle d'un Objet"
1077 #: GeometryGUI_ScaleDlg.cxx:117
1078 msgid "GEOM_SCALE_FACTOR"
1079 msgstr "Facteur d'echelle"
1081 #: GeometryGUI_SectionDlg.cxx:50
1082 msgid "GEOM_SECTION_TITLE"
1083 msgstr "BOOLEEN : Section De Deux Objets"
1085 #: GeometryGUI_SewingDlg.cxx:48
1086 msgid "GEOM_SEWING_TITLE"
1087 msgstr "Coudre des Topologies"
1089 #: GeometryGUI_ShellDlg.cxx:53
1090 msgid "GEOM_SHELL_TITLE"
1091 msgstr "Construction d'une Shell"
1093 #: GeometryGUI_SolidDlg.cxx:74
1094 msgid "GEOM_SOLID_TITLE"
1095 msgstr "Construction d'un Solid"
1097 #: GeometryGUI_SphereDlg.cxx:50
1098 msgid "GEOM_SPHERE_TITLE"
1099 msgstr "Construction d'une Sphere"
1101 #: GeometryGUI_SphereDlg.cxx:113
1102 msgid "GEOM_SPHERE_CR"
1103 msgstr "Centre + rayon"
1105 #: GeometryGUI_SphereDlg.cxx:146
1106 msgid "GEOM_SPHERE_RO"
1107 msgstr "Rayon a l'origine"
1109 #: GeometryGUI_SubShapeDlg.cxx:55
1110 msgid "GEOM_SUBSHAPE_TITLE"
1111 msgstr "Selection de Sous Shapes"
1113 #: GeometryGUI_SubShapeDlg.cxx:131
1114 msgid "GEOM_SUBSHAPE_TYPE"
1115 msgstr "Type de Sous Shapes"
1117 #: GeometryGUI_SubShapeDlg.cxx:137
1118 msgid "GEOM_SUBSHAPE_SELECT"
1119 msgstr "Selectionner de Sous Shapes"
1121 #: GeometryGUI_TorusDlg.cxx:51
1122 msgid "GEOM_TORUS_TITLE"
1123 msgstr "Constructiond'un Tore"
1125 #: GeometryGUI_SuppressFacesDlg.cxx:103
1126 msgid "GEOM_SUPRESSFACE_TITLE"
1127 msgstr "Supprimer des Faces dans un Objet"
1129 #: GeometryGUI_SuppressFacesDlg.cxx:164
1130 msgid "GEOM_SUPRESSFACE_SELECT"
1131 msgstr "Selectionner les Faces a Supprimer"
1133 #: GeometryGUI_TranslationDlg.cxx:78
1134 msgid "GEOM_TRANSLATION_COOR"
1135 msgstr "Translation Avec Coordonnees"
1137 msgid "GEOM_TRANSPARENCY_TITLE"
1138 msgstr "Transparence"
1140 msgid "GEOM_TRANSPARENCY_OPAQUE"
1143 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1144 msgstr "Transparent"
1146 msgid "GEOM_SUPPRESSHOLE_TITLE"
1147 msgstr "Suppression de trous"
1149 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1150 msgstr "Selection de la face initiale"
1152 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1153 msgstr "Selection du contour/trou sur la face"
1155 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1156 msgstr "Selection de la face terminale (si trou traversant)"
1158 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1159 msgstr "Selection de contour final (si trou traversant)"
1161 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1162 msgstr "Face ou shell"
1164 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1165 msgstr "Selection de trou(s) sur la face"
1167 #: GeometryGUI_TranslationDlg.cxx:56
1168 msgid "GEOM_TRANSLATION_TITLE"
1169 msgstr "Translation d'un Objet"
1171 #: GeometryGUI_VectorDlg.cxx:54
1172 msgid "GEOM_VECTOR_TITLE"
1173 msgstr "Construction d'un Vecteur"
1175 #: GeometryGUI_WhatisDlg.cxx:63
1176 msgid "GEOM_WHATIS_TITLE"
1179 #: GeometryGUI_WhatisDlg.cxx:86
1180 msgid "GEOM_WHATIS_OBJECT"
1181 msgstr "Objet et ses Informations Topologiques"
1183 #: GeometryGUI_WireDlg.cxx:46
1184 msgid "GEOM_WIRE_TITLE"
1185 msgstr "Creer un Wire"
1187 #: GeometryGUI_WireDlg.cxx:103
1188 msgid "GEOM_WIRE_CONNECT"
1189 msgstr "Creation d'un Wire a partir de wires/edges connectes"
1191 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1192 msgid "GEOM_WPLANE_TITLE"
1193 msgstr "plan de travail"
1195 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1196 msgid "GEOM_WPLANE_FACE"
1197 msgstr "Plan Ou Face plane"
1199 #: GeometryGUI_multiTranslationDlg.cxx:107
1200 msgid "GEOM_MULTITRANSLATION_TITLE"
1201 msgstr "Multi-Translation"
1203 #: GeometryGUI_multiTranslationDlg.cxx:107
1204 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1205 msgstr "Multi Translation Simple"
1207 #: GeometryGUI_multiTranslationDlg.cxx:107
1208 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1209 msgstr "Multi Translation Double"
1211 #: GeometryGUI_multiRotationDlg.cxx:107
1212 msgid "GEOM_MULTIROTATION_TITLE"
1213 msgstr "Multi-Rotation"
1215 #: GeometryGUI_multiRotationDlg.cxx:107
1216 msgid "GEOM_MULTIROTATION_SIMPLE"
1217 msgstr "Multi Rotation Simple"
1219 #: GeometryGUI_multiRotationDlg.cxx:107
1220 msgid "GEOM_MULTIROTATION_DOUBLE"
1221 msgstr "Multi Rotation Double"
1223 msgid "GEOM_PARAM_POINT"
1224 msgstr "Point paramétrique"
1227 #==============================================================================
1230 #: GeometryGUI.cxx:4613
1231 msgid "GEOM_MEN_WIREFRAME"
1234 #: GeometryGUI.cxx:4613
1235 msgid "GEOM_MEN_SHADING"
1238 msgid "GEOM_RECONSTRUCTION_LIMIT"
1239 msgstr "Limite de Reconstruction"
1241 msgid "GEOM_KEEP_NONLIMIT_SHAPES"
1242 msgstr "Keep nonlimit shapes"
1244 msgid "GEOM_SUPPRESS_RESULT"
1245 msgstr "Supprimer le Resultat"
1247 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1250 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1253 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1255 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1257 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1259 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1261 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1263 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1265 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1268 msgid "GEOM_SPLINE_TITLE"
1269 msgstr "Construction de Splines"
1274 msgid "GEOM_INTERPOL"
1275 msgstr "Interpolation"
1278 #==============================================================================
1281 msgid "GEOM_SKETCHER_EL"
1282 msgstr "Type d'Element"
1284 msgid "GEOM_BUT_CLOSE_SKETCH"
1285 msgstr "Fermer Sketch"
1287 msgid "GEOM_BUT_END_SKETCH"
1288 msgstr "Terminer Sketch"
1290 msgid "GEOM_SKETCHER_TITLE"
1291 msgstr "Construction de Sketch"
1293 msgid "GEOM_SKETCHER_POINT"
1296 msgid "GEOM_SKETCHER_SEGMENT"
1299 msgid "GEOM_SKETCHER_ARC"
1302 msgid "GEOM_SKETCHER_DIR"
1305 msgid "GEOM_SKETCHER_POINT2"
1308 msgid "GEOM_SKETCHER_DEST"
1309 msgstr "Destination"
1311 msgid "GEOM_SKETCHER_ABS"
1314 msgid "GEOM_SKETCHER_REL"
1317 msgid "GEOM_SKETCHER_SEL"
1320 msgid "GEOM_SKETCHER_ANGLE"
1323 msgid "GEOM_SKETCHER_PER"
1324 msgstr "Perpendiculaire"
1326 msgid "GEOM_SKETCHER_TAN"
1329 msgid "GEOM_SKETCHER_VXVY"
1332 msgid "GEOM_SKETCHER_LENGTH"
1335 msgid "GEOM_SKETCHER_X"
1338 msgid "GEOM_SKETCHER_Y"
1341 msgid "GEOM_SKETCHER_X2"
1344 msgid "GEOM_SKETCHER_Y2"
1347 msgid "GEOM_SKETCHER_X3"
1350 msgid "GEOM_SKETCHER_Y3"
1353 msgid "GEOM_SKETCHER_DX2"
1356 msgid "GEOM_SKETCHER_DY2"
1359 msgid "GEOM_SKETCHER_VX2"
1362 msgid "GEOM_SKETCHER_VY2"
1365 msgid "GEOM_SKETCHER_LENGTH2"
1368 msgid "GEOM_SKETCHER_ANGLE2"
1371 msgid "GEOM_SKETCHER_RADIUS2"
1374 msgid "GEOM_SKETCHER_UNDO"
1377 msgid "GEOM_SKETCHER_APPLY"
1380 msgid "GEOM_SKETCHER_VALUES"
1383 msgid "GEOM_SKETCHER_TYPE"
1386 msgid "GEOM_FILLET_ABORT"
1387 msgstr "Le congé ne peut-être realisé avec un rayon de %1 "
1389 msgid "GEOM_CHAMFER_ABORT"
1390 msgstr "Le chanfrein ne peut-être realisé avec %1 et %2 "
1392 #MZN: to be translated
1393 msgid "GEOM_CREATE_COPY"
1394 msgstr "Create a copy"
1396 #MZN: to be translated
1397 msgid "GEOM_CREATE_SINGLE_SOLID"
1398 msgstr "Create a single solid"
1400 msgid "GEOM_FREE_FACES"
1403 msgid "GEOM_FREE_FACES_TITLE"
1406 msgid "GEOM_PROPAGATE_TITLE"
1409 msgid "GEOM_PROPAGATE"