1 # Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
3 # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
4 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
6 # This library is free software; you can redistribute it and/or
7 # modify it under the terms of the GNU Lesser General Public
8 # License as published by the Free Software Foundation; either
9 # version 2.1 of the License.
11 # This library is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 # Lesser General Public License for more details.
16 # You should have received a copy of the GNU Lesser General Public
17 # License along with this library; if not, write to the Free Software
18 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
22 # This is a Qt message file in .po format. Each msgid starts with
23 # a scope. This scope should *NOT* be translated - eg. translating
24 # from French to English, "Foo::Bar" would be translated to "Pub",
29 "Project-Id-Version: PROJECT VERSION\n"
30 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
31 "PO-Revision-Date: YYYY-MM-DD\n"
32 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
33 "Content-Type: text/plain; charset=iso-8859-1\n"
36 #==============================================================================
40 msgid "GEOM_BUT_APPLY"
44 msgid "GEOM_BUT_CLOSE"
48 msgid "GEOM_BUT_CANCEL"
69 msgid "GEOM_BUT_EXPLODE"
73 #==============================================================================
76 #: GeometryGUI.cxx:563
77 msgid "GEOM_INF_LOADED"
78 msgstr "Le fichier %1 est chargé."
81 #==============================================================================
84 #: GeometryGUI.cxx:3069
85 msgid "GEOM_PRP_COMMAND"
86 msgstr "Pas de commande associée à l'id = %1."
88 #: GeometryGUI.cxx:4977
89 msgid "GEOM_PRP_ABORT"
90 msgstr "L'opération a echoué"
92 #: GeometryGUI.cxx:5058
94 msgstr "Opération effectuée"
96 #: GeometryGUI.cxx:3717
97 msgid "GEOM_PRP_LOADING"
98 msgstr "Chargement de %1 ..."
100 #: GeometryGUI.cxx:1412
101 msgid "GEOM_PRP_NULLSHAPE"
102 msgstr "Erreur, objet inconsistant ou inapproprié !"
104 #: GeometryGUI.cxx:5072
105 msgid "GEOM_PRP_READY"
108 #: GeometryGUI.cxx:1690
109 msgid "GEOM_PRP_SELECT_SUBSHAPES"
110 msgstr "Selection de sous objets"
113 msgstr "Confirmer cette operation"
115 msgid "GEOM_CONFIRM_INFO"
116 msgstr "L'objet contient %1 sous objets"
119 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
120 msgstr "Non permis dans viewer VTK"
122 #: GeometryGUI.cxx:1690
123 msgid "GEOM_PRP_SHAPE_IN_STUDY"
124 msgstr "La shape principale doit etre avant dans l'etude"
126 #: GeometryGUI.cxx:1690
127 msgid "GEOM_PRP_SELECT_EDGE"
128 msgstr "Selectionner les edges et clicker sur Apply"
130 #: GeometryGUI.cxx:1690
131 msgid "GEOM_PRP_SELECT_FACE"
132 msgstr "Select les faces a supprimer et clicker sur Ok/Apply"
134 #: GeometryGUI.cxx:1690
135 msgid "GEOM_PRP_SELECT_FIRST"
136 msgstr "Selectionner la shape principale en premier"
138 #: GeometryGUI.cxx:1690
139 msgid "GEOM_PRP_MIN_DIST"
140 msgstr "Min Distance non calculer"
143 #==============================================================================
146 #: GeometryGUI.cxx:3698
147 msgid "GEOM_MEN_ALL_FILES"
148 msgstr "Tous fichiers ( * )"
150 #: GeometryGUI.cxx:4389
151 msgid "GEOM_MEN_ANGLE"
154 #: GeometryGUI.cxx:3941
155 msgid "GEOM_MEN_COMPONENT"
158 #: GeometryGUI.cxx:4389
159 msgid "GEOM_MEN_ENTER_ANGLE"
160 msgstr "Saisir un angle en degrés"
162 #: GeometryGUI.cxx:3758
163 msgid "GEOM_MEN_EXPORT"
166 #: GeometryGUI.cxx:3648
167 msgid "GEOM_MEN_IMPORT"
170 #: GeometryGUI.cxx:3763
171 msgid "GEOM_MEN_LOAD_SCRIPT"
172 msgstr "Fichiers PYTHON ( *.py )"
174 #: GeometryGUI.cxx:2931
175 msgid "GEOM_MEN_ISOS"
176 msgstr "Choisir un nombre d'isos"
178 #: GeometryGUI.cxx:4278
179 msgid "GEOM_MEN_POPUP_NAME"
182 #: GeometryGUI.cxx:4414
183 msgid "GEOM_MEN_SKETCHER_X"
184 msgstr "Saisir une longueur pour fixer X"
186 #: GeometryGUI.cxx:4438
187 msgid "GEOM_MEN_SKETCHER_Y"
188 msgstr "Saisir une longueur pour fixer Y"
190 #: GeometryGUI.cxx:2898
191 msgid "GEOM_MEN_TRANSPARENCY"
192 msgstr "Transparence"
194 #: GeometryGUI.cxx:4413
198 #: GeometryGUI.cxx:4437
202 #: GeometryGUI_NbIsosDlg.cxx:36
203 msgid "GEOM_MEN_ISOU"
206 #: GeometryGUI_NbIsosDlg.cxx:53
207 msgid "GEOM_MEN_ISOV"
210 #: GeometryGUI_TransparencyDlg.cxx:31
211 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
212 msgstr "Transparence :"
214 msgid "GEOM_MEN_STEP_LABEL"
217 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
218 msgstr "Noms identiques : selectionner avec la souris !"
220 msgid "GEOM_NAME_INCORRECT"
221 msgstr "Le nom saisi n'existe pas"
226 #==============================================================================
229 #: GeometryGUI.cxx:892
230 msgid "GEOM_WRN_RADIUS_NULL"
231 msgstr "Le rayon est nul"
233 #: GeometryGUI.cxx:3854
234 msgid "GEOM_WRN_WARNING"
235 msgstr "Avertissement"
237 #: GeometryGUI.cxx:3854
238 msgid "GEOM_REALLY_DELETE"
239 msgstr "Voulez-vous supprimer l'object(s) ?"
242 #==============================================================================
250 msgid "GEOM_MAIN_OBJECT"
251 msgstr "Objet Principal"
254 msgid "GEOM_TOOL_OBJECT"
258 msgid "GEOM_BASE_OBJECT"
259 msgstr "Objet De Base"
262 msgid "GEOM_PATH_OBJECT"
263 msgstr "Objet Chemin"
270 msgid "GEOM_OBJECT_I"
274 msgid "GEOM_OBJECT_RESULT"
275 msgstr "Objet Et Résultat"
282 msgid "GEOM_BASE_POINT"
283 msgstr "Point De Base"
286 msgid "GEOM_CENTER_POINT"
287 msgstr "Point Centre"
290 msgid "GEOM_DIAGONAL_POINTS"
291 msgstr "Points Diagonaux"
294 msgid "GEOM_CENTRAL_POINT"
295 msgstr "Point Central"
306 msgid "GEOM_ARGUMENTS"
318 msgid "GEOM_RADIUS_I"
334 msgid "GEOM_COORDINATES"
346 msgid "GEOM_REVERSE_U"
350 msgid "GEOM_REVERSE_V"
366 msgid "GEOM_VECTOR_LENGTH"
367 msgstr "Longueur Du Vecteur :"
370 msgid "GEOM_REVERSE_VECTOR"
371 msgstr "Renverser Le Vecteur"
374 msgid "GEOM_POINT_MIRROR"
375 msgstr "Point Miroir"
378 msgid "GEOM_AXE_MIRROR"
382 msgid "GEOM_PLANE_MIRROR"
386 msgid "GEOM_FACE_SELECTION"
387 msgstr "Selection de Face"
394 msgid "GEOM_WATER_DENSITY"
395 msgstr "Densité de l'eau :"
398 msgid "GEOM_MESHING_DEFLECTION"
399 msgstr "Déflection Du Maillage :"
402 msgid "GEOM_DIMENSIONS"
406 msgid "GEOM_PRECISION"
410 msgid "GEOM_SELECTION"
414 msgid "GEOM_NB_TIMES"
418 msgid "GEOM_NB_TIMES_U"
419 msgstr "Nb. Fois U :"
422 msgid "GEOM_NB_TIMES_V"
423 msgstr "Nb. Fois V :"
438 #==============================================================================
442 msgid "GEOM_SHAPES_ON_SHAPE"
443 msgstr "Get shapes on shape"
444 msgid "GEOM_SHAPES_ON_SHAPE_ESHAPE"
445 msgstr "Shape for exploding"
446 msgid "GEOM_SHAPES_ON_SHAPE_CSHAPE"
447 msgstr "Shape for checking"
448 msgid "GEOM_SHAPES_ON_SHAPE_STATE"
452 msgid "GEOM_PARTITION"
455 #Half-space partition
456 msgid "GEOM_PARTITION_HALFSPACE"
457 msgstr "Half-space partition"
460 msgid "GEOM_TOLERANCE"
464 msgid "GEOM_ORIENTATION"
472 msgid "GEOM_REVOLUTION"
476 msgid "GEOM_ROTATION"
480 msgid "GEOM_ARCHIMEDE"
492 msgid "GEOM_DISTANCE"
497 msgstr "Surface Par Edges"
516 msgid "GEOM_TRANSLATION"
521 msgstr "Plan de Travail"
528 msgid "GEOM_EXTRUSION"
532 msgid "GEOM_SUB_SHAPE"
536 msgid "GEOM_SUPRESSFACE"
537 msgstr "Supression de Face"
548 msgid "GEOM_CHECK_SHAPE"
551 #Check Blocks Compound
552 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
553 msgstr "Check Blocks Compound"
555 #Check Blocks Compound Errors
556 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
559 #Check Blocks Compound Errors
560 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
561 msgstr "The Compound of Blocks has no errors"
563 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
564 msgstr "The Compound of Blocks has errors"
566 #Check Blocks Compound SubShapes
567 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
568 msgstr "Incriminated Sub-Shapes"
576 msgstr "Boite Anglobante"
580 msgstr "Centre de Masse"
583 msgid "GEOM_PROPERTIES"
584 msgstr "Basiques Proprietes"
587 msgid "GEOM_MULTITRANSLATION"
588 msgstr "Multi-Translation"
591 msgid "GEOM_MULTIROTATION"
592 msgstr "Multi-Rotation"
595 #==============================================================================
614 msgid "GEOM_ELLIPSE_TITLE"
615 msgstr "Construction d'Ellipses"
618 msgid "GEOM_RADIUS_MAJOR"
619 msgstr "Rayon max. :"
622 msgid "GEOM_RADIUS_MINOR"
623 msgstr "Rayon min. :"
626 msgid "GEOM_COMPOUND"
630 msgid "GEOM_COMPOUNDSOLID"
638 msgid "GEOM_CYLINDER"
682 msgid "GEOM_SURFCONE"
683 msgstr "Face Conique"
686 msgid "GEOM_SURFCYLINDER"
687 msgstr "Face Cylindrique"
690 msgid "GEOM_SURFSPHERE"
691 msgstr "Face Sphèrique"
694 msgid "GEOM_SURFTORUS"
695 msgstr "Face Toroique"
706 msgid "GEOM_VECTOR_U"
710 msgid "GEOM_VECTOR_V"
726 msgid "GEOM_PARAMETER"
728 msgid "GEOM_UPARAMETER"
729 msgstr "U-paramètre :"
730 msgid "GEOM_VPARAMETER"
731 msgstr "V-paramètre :"
735 #==============================================================================
779 #==============================================================================
783 msgid "GEOM_STEP_TITLE"
784 msgstr "Increment par défaut lors des constructions"
786 #: GeometryGUI_ArcDlg.cxx:45
787 msgid "GEOM_ARC_TITLE"
788 msgstr "Construction d'un Arc"
790 #: GeometryGUI_ArchimedeDlg.cxx:55
791 msgid "GEOM_ARCHIMEDE_TITLE"
792 msgstr "Construction d'Archimède"
794 #: GeometryGUI_BndBoxDlg.cxx:59
795 msgid "GEOM_BNDBOX_TITLE"
796 msgstr "Boite Englobante"
798 #: GeometryGUI_BndBoxDlg.cxx:82
799 msgid "GEOM_BNDBOX_OBJDIM"
800 msgstr "Objet and ses dimensions"
802 #: GeometryGUI_BoxDlg.cxx:50
803 msgid "GEOM_BOX_TITLE"
804 msgstr "Construction d'une Boite"
806 #: GeometryGUI_BoxDlg.cxx:50
808 msgstr "Dimensions A l'Origine"
810 #: GeometryGUI_ChamferDlg.cxx:58
811 msgid "GEOM_CHAMFER_TITLE"
812 msgstr "Construction d'un Chanfrein"
814 #: GeometryGUI_ChamferDlg.cxx:58
815 msgid "GEOM_CHAMFER_ALL"
816 msgstr "Chanfrein sur toute la Shape"
818 #: GeometryGUI_ChamferDlg.cxx:58
819 msgid "GEOM_CHAMFER_EDGES"
820 msgstr "Chanfrein sur Edges de la Shape"
822 #: GeometryGUI_ChamferDlg.cxx:58
823 msgid "GEOM_CHAMFER_FACES"
824 msgstr "Chanfrein sur Faces de la Shape"
826 #: GeometryGUI_CircleDlg.cxx:48
827 msgid "GEOM_CIRCLE_TITLE"
828 msgstr "Construction d'un Cercle"
830 #: GeometryGUI_CenterMassDlg.cxx:77
831 msgid "GEOM_CMASS_TITLE"
832 msgstr "Centre De Gravité"
834 msgid "GEOM_PLANE_SIZE"
835 msgstr "Taille du plan :"
837 #: GeometryGUI_CommonDlg.cxx:47
838 msgid "GEOM_COMMON_TITLE"
839 msgstr "BOOLEEN : Jonction De Deux Objets"
841 #: GeometryGUI_CompoundDlg.cxx:44
842 msgid "GEOM_COMPOUND_TITLE"
843 msgstr "Création d'un Compound"
845 #: GeometryGUI_ConeDlg.cxx:49
846 msgid "GEOM_CONE_TITLE"
847 msgstr "Construction d'un Cone"
849 #: GeometryGUI_CutDlg.cxx:48
850 msgid "GEOM_CUT_TITLE"
851 msgstr "BOOLEEN : Couper Deux Objets"
853 #: GeometryGUI_CylinderDlg.cxx:47
854 msgid "GEOM_CYLINDER_TITLE"
855 msgstr "Construction d'un Cylindre"
857 #: GeometryGUI_CheckShape.cxx:60
858 msgid "GEOM_CHECK_TITLE"
861 #: MeasureGUI_CheckCompoundOfBlocks.cxx:61
862 msgid "GEOM_CHECK_COMPOUND_BLOCKS_TITLE"
863 msgstr "Check Blocks Compound"
865 #: GeometryGUI_CheckShape.cxx:83
866 msgid "GEOM_CHECK_INFOS"
867 msgstr "Objet et ses Informations Topologiques"
869 #: GeometryGUI_DistanceDlg.cxx:57
870 msgid "GEOM_MINDIST_TITLE"
871 msgstr "Distance Minimale entre Deux Objets"
873 #: GeometryGUI_DistanceDlg.cxx:57
874 msgid "GEOM_MINDIST_OBJ"
875 msgstr "Objets Et Resultats"
877 #: GeometryGUI_EdgeDlg.cxx:47
878 msgid "GEOM_EDGE_TITLE"
879 msgstr "Création d'un Edge"
881 #: GeometryGUI_FilletDlg.cxx:58
882 msgid "GEOM_FILLET_TITLE"
883 msgstr "Construction d'un Congé"
885 #: GeometryGUI_FilletDlg.cxx:58
886 msgid "GEOM_FILLET_ALL"
887 msgstr "Congé sur toute la Shape"
889 #: GeometryGUI_FilletDlg.cxx:58
890 msgid "GEOM_FILLET_EDGES"
891 msgstr "Congé sur Edges de la Shape"
893 #: GeometryGUI_FilletDlg.cxx:58
894 msgid "GEOM_FILLET_FACES"
895 msgstr "Congé sur Faces de la Shape"
897 #: GeometryGUI_FaceDlg.cxx:49
898 msgid "GEOM_FACE_TITLE"
899 msgstr "Création d'une Face"
901 #: GeometryGUI_FaceDlg.cxx:78
902 msgid "GEOM_FACE_FFW"
903 msgstr "Face a partir d'un wire"
905 #: GeometryGUI_FaceDlg.cxx:103
906 msgid "GEOM_FACE_OPT"
907 msgstr "Création d'une Face plane"
909 #: GeometryGUI_FillingDlg.cxx:53
910 msgid "GEOM_FILLING_TITLE"
911 msgstr "Surface Par Edges"
913 #: GeometryGUI_FillingDlg.cxx:112
914 msgid "GEOM_FILLING_ARG"
915 msgstr "Argument Et Parametres"
917 #: GeometryGUI_FillingDlg.cxx:128
918 msgid "GEOM_FILLING_MIN_DEG"
921 #: GeometryGUI_FillingDlg.cxx:142
922 msgid "GEOM_FILLING_MAX_DEG"
925 #: GeometryGUI_FillingDlg.cxx:150
926 msgid "GEOM_FILLING_TOL_2D"
929 #: GeometryGUI_FillingDlg.cxx:170
930 msgid "GEOM_FILLING_COMPOUND"
931 msgstr "Compound de Edges"
933 #: GeometryGUI_FillingDlg.cxx:184
934 msgid "GEOM_FILLING_TOL_3D"
937 #: GeometryGUI_FillingDlg.cxx:192
938 msgid "GEOM_FILLING_NB_ITER"
941 #: GeometryGUI_FuseDlg.cxx:48
942 msgid "GEOM_FUSE_TITLE"
943 msgstr "BOOLEEN : Fusionner deux Objets"
945 #: GeometryGUI_InertiaDlg.cxx:42
946 msgid "GEOM_INERTIA_TITLE"
947 msgstr "Calculs d'Inertie"
949 #: GeometryGUI_InertiaDlg.cxx:50
950 msgid "GEOM_INERTIA_CONSTR"
951 msgstr "Matrice Et Moments d'Inertie"
953 #: GeometryGUI_InertiaDlg.cxx:100
954 msgid "GEOM_INERTIA_I"
957 #: GeometryGUI_InertiaDlg.cxx:182
958 msgid "GEOM_INERTIA_IXYZ"
959 msgstr "IX & IY & IZ"
961 #: GeometryGUI_LineDlg.cxx:50
962 msgid "GEOM_LINE_TITLE"
963 msgstr "Construction d'une Ligne"
965 #: GeometryGUI_MaxToleranceDlg.cxx:53
966 msgid "GEOM_TOLERANCE_TITLE"
967 msgstr "Tolerance Maximale"
969 #: GeometryGUI_MaxToleranceDlg.cxx:84
970 msgid "GEOM_TOLERANCE_CONSTR"
971 msgstr "Object et ses Tolerances"
973 #: GeometryGUI_MaxToleranceDlg.cxx:121
974 msgid "GEOM_TOLERANCE_FACE"
977 #: GeometryGUI_MaxToleranceDlg.cxx:138
978 msgid "GEOM_TOLERANCE_EDGE"
981 #: GeometryGUI_MaxToleranceDlg.cxx:155
982 msgid "GEOM_TOLERANCE_VERTEX"
985 #: GeometryGUI_MirrorDlg.cxx:52
986 msgid "GEOM_MIRROR_TITLE"
987 msgstr "Methode Miroir"
989 #: GeometryGUI_OrientationDlg.cxx:46
990 msgid "GEOM_ORIENTATION_TITLE"
991 msgstr "Changer l'Orientation"
993 #: GeometryGUI_OrientationDlg.cxx:134
994 msgid "GEOM_ORIENTATION_OPT"
995 msgstr "Renverser l'orientation avec une simulation de vecteur normal"
997 #: GeometryGUI_GetShapesOnShapeDlg.cxx
998 msgid "GEOM_SHAPES_ON_SHAPE_TITLE"
999 msgstr "Get shapes on shape"
1001 #: GeometryGUI_PartitionDlg.cxx:45
1002 msgid "GEOM_PARTITION_TITLE"
1003 msgstr "Partition d'Objects Avec Outils"
1005 #: GeometryGUI_PartitionDlg.cxx:45
1006 msgid "GEOM_KEEP_OBJECT"
1007 msgstr "Objet garde"
1009 #: GeometryGUI_PartitionDlg.cxx:45
1010 msgid "GEOM_PARTITION_ORIENTATION"
1011 msgstr "Change l'orientation"
1013 #: GeometryGUI_PartitionDlg.cxx:45
1014 msgid "SUPPRESS_RESULT"
1015 msgstr "Suppress Result"
1017 msgid "GEOM_REMOVE_WEBS"
1018 msgstr "Remove webs"
1020 msgid "GEOM_SET_MATERIALS"
1021 msgstr "Set materials"
1023 #: OperationGUI_MaterialDlg.cxx:45
1024 msgid "GEOM_MATERIAL_TITLE"
1025 msgstr "Define materials for Dominant Fuse"
1027 msgid "GEOM_MATERIAL_SHAPE"
1030 msgid "GEOM_MATERIAL_MATERIAL"
1033 msgid "GEOM_MATERIAL_ID"
1034 msgstr "Material ID:"
1036 msgid "GEOM_MATERIAL_SET"
1039 #: GeometryGUI_PipeDlg.cxx:47
1040 msgid "GEOM_PIPE_TITLE"
1041 msgstr "Construction d'une Pipe"
1043 #: GeometryGUI_PointDlg.cxx:52
1044 msgid "GEOM_POINT_TITLE"
1045 msgstr "Construction d'un Point"
1047 #: GeometryGUI_PlaneDlg.cxx:60
1048 msgid "GEOM_PLANE_TITLE"
1049 msgstr "Construction d'un Plan"
1051 #: GeometryGUI_PlaneDlg.cxx:172
1052 msgid "GEOM_PLANE_PVC"
1053 msgstr "Point + Vecteur Coordonnes"
1055 #: GeometryGUI_PlaneDlg.cxx:133
1056 msgid "GEOM_PLANE_PV"
1057 msgstr "Point + Vecteur"
1059 #: GeometryGUI_PrismDlg.cxx:54
1060 msgid "GEOM_EXTRUSION_TITLE"
1061 msgstr "Extruder une Shape de base"
1063 #: GeometryGUI_PrismDlg.cxx:83
1064 msgid "GEOM_EXTRUSION_BSV"
1065 msgstr "Shape de base + Vecteur"
1067 msgid "GEOM_EXTRUSION_BSV_2P"
1068 msgstr "Shape de base + 2 Points"
1070 #: GeometryGUI_PropertiesDlg.cxx:56
1071 msgid "GEOM_PROPERTIES_TITLE"
1072 msgstr "Proprietes Basiques"
1074 #: GeometryGUI_PropertiesDlg.cxx:78
1075 msgid "GEOM_PROPERTIES_CONSTR"
1076 msgstr "Objet et ses Proprietes"
1078 #: GeometryGUI_PropertiesDlg.cxx:114
1079 msgid "GEOM_PROPERTIES_SURFACE"
1082 #: GeometryGUI_PropertiesDlg.cxx:120
1083 msgid "GEOM_PROPERTIES_VOLUME"
1086 #: GeometryGUI_RevolDlg.cxx:49
1087 msgid "GEOM_REVOLUTION_TITLE"
1088 msgstr "Construction Par Revolution"
1090 #: GeometryGUI_RotationDlg.cxx:51
1091 msgid "GEOM_ROTATION_TITLE"
1092 msgstr "Rotation d'un Objet"
1094 #: GeometryGUI_ScaleDlg.cxx:52
1095 msgid "GEOM_SCALE_TITLE"
1096 msgstr "Echelle d'un Objet"
1098 #: GeometryGUI_ScaleDlg.cxx:117
1099 msgid "GEOM_SCALE_FACTOR"
1100 msgstr "Facteur d'echelle"
1102 #: GeometryGUI_SectionDlg.cxx:50
1103 msgid "GEOM_SECTION_TITLE"
1104 msgstr "BOOLEEN : Section De Deux Objets"
1106 #: GeometryGUI_SewingDlg.cxx:48
1107 msgid "GEOM_SEWING_TITLE"
1108 msgstr "Coudre des Topologies"
1110 #: GeometryGUI_ShellDlg.cxx:53
1111 msgid "GEOM_SHELL_TITLE"
1112 msgstr "Construction d'une Shell"
1114 #: GeometryGUI_SolidDlg.cxx:74
1115 msgid "GEOM_SOLID_TITLE"
1116 msgstr "Construction d'un Solid"
1118 #: GeometryGUI_SphereDlg.cxx:50
1119 msgid "GEOM_SPHERE_TITLE"
1120 msgstr "Construction d'une Sphere"
1122 #: GeometryGUI_SphereDlg.cxx:113
1123 msgid "GEOM_SPHERE_CR"
1124 msgstr "Centre + rayon"
1126 #: GeometryGUI_SphereDlg.cxx:146
1127 msgid "GEOM_SPHERE_RO"
1128 msgstr "Rayon a l'origine"
1130 #: GeometryGUI_SubShapeDlg.cxx:55
1131 msgid "GEOM_SUBSHAPE_TITLE"
1132 msgstr "Selection de Sous Shapes"
1134 #: GeometryGUI_SubShapeDlg.cxx:131
1135 msgid "GEOM_SUBSHAPE_TYPE"
1136 msgstr "Type de Sous Shapes"
1138 #: GeometryGUI_SubShapeDlg.cxx:137
1139 msgid "GEOM_SUBSHAPE_SELECT"
1140 msgstr "Selectionner de Sous Shapes"
1142 #: GeometryGUI_TorusDlg.cxx:51
1143 msgid "GEOM_TORUS_TITLE"
1144 msgstr "Constructiond'un Tore"
1146 #: GeometryGUI_SuppressFacesDlg.cxx:103
1147 msgid "GEOM_SUPRESSFACE_TITLE"
1148 msgstr "Supprimer des Faces dans un Objet"
1150 #: GeometryGUI_SuppressFacesDlg.cxx:164
1151 msgid "GEOM_SUPRESSFACE_SELECT"
1152 msgstr "Selectionner les Faces a Supprimer"
1154 #: GeometryGUI_TranslationDlg.cxx:78
1155 msgid "GEOM_TRANSLATION_COOR"
1156 msgstr "Translation Avec Coordonnees"
1158 msgid "GEOM_TRANSPARENCY_TITLE"
1159 msgstr "Transparence"
1161 msgid "GEOM_TRANSPARENCY_OPAQUE"
1164 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1165 msgstr "Transparent"
1167 msgid "GEOM_SUPPRESSHOLE_TITLE"
1168 msgstr "Suppression de trous"
1170 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1171 msgstr "Selection de la face initiale"
1173 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1174 msgstr "Selection du contour/trou sur la face"
1176 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1177 msgstr "Selection de la face terminale (si trou traversant)"
1179 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1180 msgstr "Selection de contour final (si trou traversant)"
1182 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1183 msgstr "Face ou shell"
1185 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1186 msgstr "Selection de trou(s) sur la face"
1188 #: GeometryGUI_TranslationDlg.cxx:56
1189 msgid "GEOM_TRANSLATION_TITLE"
1190 msgstr "Translation d'un Objet"
1192 #: GeometryGUI_VectorDlg.cxx:54
1193 msgid "GEOM_VECTOR_TITLE"
1194 msgstr "Construction d'un Vecteur"
1196 #: GeometryGUI_WhatisDlg.cxx:63
1197 msgid "GEOM_WHATIS_TITLE"
1200 #: GeometryGUI_WhatisDlg.cxx:86
1201 msgid "GEOM_WHATIS_OBJECT"
1202 msgstr "Objet et ses Informations Topologiques"
1204 #: GeometryGUI_WireDlg.cxx:46
1205 msgid "GEOM_WIRE_TITLE"
1206 msgstr "Creer un Wire"
1208 #: GeometryGUI_WireDlg.cxx:103
1209 msgid "GEOM_WIRE_CONNECT"
1210 msgstr "Creation d'un Wire a partir de wires/edges connectes"
1212 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1213 msgid "GEOM_WPLANE_TITLE"
1214 msgstr "plan de travail"
1216 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1217 msgid "GEOM_WPLANE_FACE"
1218 msgstr "Plan Ou Face plane"
1220 #: GeometryGUI_multiTranslationDlg.cxx:107
1221 msgid "GEOM_MULTITRANSLATION_TITLE"
1222 msgstr "Multi-Translation"
1224 #: GeometryGUI_multiTranslationDlg.cxx:107
1225 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1226 msgstr "Multi Translation Simple"
1228 #: GeometryGUI_multiTranslationDlg.cxx:107
1229 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1230 msgstr "Multi Translation Double"
1232 #: GeometryGUI_multiRotationDlg.cxx:107
1233 msgid "GEOM_MULTIROTATION_TITLE"
1234 msgstr "Multi-Rotation"
1236 #: GeometryGUI_multiRotationDlg.cxx:107
1237 msgid "GEOM_MULTIROTATION_SIMPLE"
1238 msgstr "Multi Rotation Simple"
1240 #: GeometryGUI_multiRotationDlg.cxx:107
1241 msgid "GEOM_MULTIROTATION_DOUBLE"
1242 msgstr "Multi Rotation Double"
1244 msgid "GEOM_PARAM_POINT"
1245 msgstr "Point paramétrique"
1248 #==============================================================================
1251 #: GeometryGUI.cxx:4613
1252 msgid "GEOM_MEN_WIREFRAME"
1255 #: GeometryGUI.cxx:4613
1256 msgid "GEOM_MEN_SHADING"
1259 msgid "GEOM_RECONSTRUCTION_LIMIT"
1260 msgstr "Limite de Reconstruction"
1262 msgid "GEOM_KEEP_NONLIMIT_SHAPES"
1263 msgstr "Keep nonlimit shapes"
1265 msgid "GEOM_SUPPRESS_RESULT"
1266 msgstr "Supprimer le Resultat"
1268 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1271 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1274 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1276 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1278 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1280 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1282 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1284 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1286 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1289 msgid "GEOM_SPLINE_TITLE"
1290 msgstr "Construction de Splines"
1295 msgid "GEOM_INTERPOL"
1296 msgstr "Interpolation"
1298 msgid "GEOM_STATE_IN"
1300 msgid "GEOM_STATE_OUT"
1302 msgid "GEOM_STATE_ON"
1304 msgid "GEOM_STATE_ONIN"
1306 msgid "GEOM_STATE_ONOUT"
1308 msgid "GEOM_STATE_INOUT"
1312 #==============================================================================
1315 msgid "GEOM_SKETCHER_EL"
1316 msgstr "Type d'Element"
1318 msgid "GEOM_BUT_CLOSE_SKETCH"
1319 msgstr "Fermer Sketch"
1321 msgid "GEOM_BUT_END_SKETCH"
1322 msgstr "Terminer Sketch"
1324 msgid "GEOM_SKETCHER_TITLE"
1325 msgstr "Construction de Sketch"
1327 msgid "GEOM_SKETCHER_POINT"
1330 msgid "GEOM_SKETCHER_SEGMENT"
1333 msgid "GEOM_SKETCHER_ARC"
1336 msgid "GEOM_SKETCHER_DIR"
1339 msgid "GEOM_SKETCHER_POINT2"
1342 msgid "GEOM_SKETCHER_DEST"
1343 msgstr "Destination"
1345 msgid "GEOM_SKETCHER_ABS"
1348 msgid "GEOM_SKETCHER_REL"
1351 msgid "GEOM_SKETCHER_SEL"
1354 msgid "GEOM_SKETCHER_ANGLE"
1357 msgid "GEOM_SKETCHER_PER"
1358 msgstr "Perpendiculaire"
1360 msgid "GEOM_SKETCHER_TAN"
1363 msgid "GEOM_SKETCHER_VXVY"
1366 msgid "GEOM_SKETCHER_LENGTH"
1369 msgid "GEOM_SKETCHER_X"
1372 msgid "GEOM_SKETCHER_Y"
1375 msgid "GEOM_SKETCHER_X2"
1378 msgid "GEOM_SKETCHER_Y2"
1381 msgid "GEOM_SKETCHER_X3"
1384 msgid "GEOM_SKETCHER_Y3"
1387 msgid "GEOM_SKETCHER_DX2"
1390 msgid "GEOM_SKETCHER_DY2"
1393 msgid "GEOM_SKETCHER_VX2"
1396 msgid "GEOM_SKETCHER_VY2"
1399 msgid "GEOM_SKETCHER_LENGTH2"
1402 msgid "GEOM_SKETCHER_ANGLE2"
1405 msgid "GEOM_SKETCHER_RADIUS2"
1408 msgid "GEOM_SKETCHER_UNDO"
1411 msgid "GEOM_SKETCHER_APPLY"
1414 msgid "GEOM_SKETCHER_VALUES"
1417 msgid "GEOM_SKETCHER_TYPE"
1420 msgid "GEOM_FILLET_ABORT"
1421 msgstr "Le congé ne peut-être realisé avec un rayon de %1 "
1423 msgid "GEOM_CHAMFER_ABORT"
1424 msgstr "Le chanfrein ne peut-être realisé avec %1 et %2 "
1426 #MZN: to be translated
1427 msgid "GEOM_CREATE_COPY"
1428 msgstr "Create a copy"
1430 #MZN: to be translated
1431 msgid "GEOM_CREATE_SINGLE_SOLID"
1432 msgstr "Create a single solid"
1434 msgid "GEOM_FREE_FACES"
1437 msgid "GEOM_FREE_FACES_TITLE"
1440 msgid "GEOM_PROPAGATE_TITLE"
1443 msgid "GEOM_PROPAGATE"