src/GEOMGUI/GEOM_msg_en.ts

   1 <!DOCTYPE TS>
   2 <!--
   3   Copyright (C) 2007-2008  CEA/DEN, EDF R&D, OPEN CASCADE
   4
   5   Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
   6   CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
   7
   8   This library is free software; you can redistribute it and/or
   9   modify it under the terms of the GNU Lesser General Public
  10   License as published by the Free Software Foundation; either
  11   version 2.1 of the License.
  12
  13   This library is distributed in the hope that it will be useful,
  14   but WITHOUT ANY WARRANTY; without even the implied warranty of
  15   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16   Lesser General Public License for more details.
  17
  18   You should have received a copy of the GNU Lesser General Public
  19   License along with this library; if not, write to the Free Software
  20   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  21
  22   See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  23
  24 -->
  25 <TS version="1.1" >
  26     <context>
  27         <name>@default</name>
  28         <message>
  29             <source>CHANGE_ORIENTATION_NEW_OBJ_NAME</source>
  30             <translation>Invert</translation>
  31         </message>
  32         <message>
  33             <source>CLOSE_CONTOUR_NEW_OBJ_NAME</source>
  34             <translation>CloseContour</translation>
  35         </message>
  36         <message>
  37             <source>DEP_OBJECT</source>
  38             <translation>Selected object has been used to create another one.
  39 It can't be deleted </translation>
  40         </message>
  41         <message>
  42             <source>DEVIDE_EDGE_NEW_OBJECT_NAME</source>
  43             <translation>NewObject</translation>
  44         </message>
  45         <message>
  46             <source>ERROR_SHAPE_TYPE</source>
  47             <translation>Object of incorrect type selected!
  48 Please, select face, shell or solid and try again</translation>
  49         </message>
  50         <message>
  51             <source> iErr : 10</source>
  52             <translation>the Classifier is NULL</translation>
  53         </message>
  54         <message>
  55             <source> iErr : 11</source>
  56             <translation>the Shape is NULL</translation>
  57         </message>
  58         <message>
  59             <source> iErr : 12</source>
  60             <translation>Unallowed Type of Subshape</translation>
  61         </message>
  62         <message>
  63             <source> iErr : 13</source>
  64             <translation>Unallowed State</translation>
  65         </message>
  66         <message>
  67             <source> iErr : 15</source>
  68             <translation>Unallowed Surface Type</translation>
  69         </message>
  70         <message>
  71             <source> iErr : 20</source>
  72             <translation>Triangulation is not Found</translation>
  73         </message>
  74         <message>
  75             <source> iErr : 30</source>
  76             <translation>Can not Obtain the Line From the Link</translation>
  77         </message>
  78         <message>
  79             <source> iErr : 40</source>
  80             <translation>A Point Can Not Be Classified</translation>
  81         </message>
  82         <message>
  83             <source> iErr : 41</source>
  84             <translation>Invalid Data for Classifier</translation>
  85         </message>
  86         <message>
  87             <source>GEOM_2D_CONTINUTY</source>
  88             <translation>2D continuity</translation>
  89         </message>
  90         <message>
  91             <source>GEOM_2D_CURVE_MODE</source>
  92             <translation>2D curve mode</translation>
  93         </message>
  94         <message>
  95             <source>GEOM_2D_TOLERANCE</source>
  96             <translation>2D tolerance</translation>
  97         </message>
  98         <message>
  99             <source>GEOM_3D_CONTINUTY</source>
 100             <translation>3D continuity</translation>
 101         </message>
 102         <message>
 103             <source>GEOM_3D_CURVE_MODE</source>
 104             <translation>3D curve mode</translation>
 105         </message>
 106         <message>
 107             <source>GEOM_3D_TOLERANCE</source>
 108             <translation>3D tolerance</translation>
 109         </message>
 110         <message>
 111             <source>GEOM_3_POINTS</source>
 112             <translation>3 points</translation>
 113         </message>
 114         <message>
 115             <source>GEOM_ADD_POINT</source>
 116             <translation>Add point</translation>
 117         </message>
 118         <message>
 119             <source>GEOM_ANGLE</source>
 120             <translation>Angle :</translation>
 121         </message>
 122         <message>
 123             <source>GEOM_ANGLE_1</source>
 124             <translation>Angle</translation>
 125         </message>
 126         <message>
 127             <source>GEOM_ARC</source>
 128             <translation>Arc</translation>
 129         </message>
 130         <message>
 131             <source>GEOM_ARCHIMEDE</source>
 132             <translation>Archimede</translation>
 133         </message>
 134         <message>
 135             <source>GEOM_ARCHIMEDE_TITLE</source>
 136             <translation>Archimede Construction</translation>
 137         </message>
 138         <message>
 139             <source>GEOM_ARC_TITLE</source>
 140             <translation>Arc Construction</translation>
 141         </message>
 142         <message>
 143             <source>GEOM_ARGUMENTS</source>
 144             <translation>Arguments</translation>
 145         </message>
 146         <message>
 147             <source>GEOM_AXE_MIRROR</source>
 148             <translation>Axe Mirror</translation>
 149         </message>
 150         <message>
 151             <source>GEOM_AXIS</source>
 152             <translation>Axis</translation>
 153         </message>
 154         <message>
 155             <source>GEOM_BASE</source>
 156             <translation>Base</translation>
 157         </message>
 158         <message>
 159             <source>GEOM_BASE_OBJECT</source>
 160             <translation>Base Object</translation>
 161         </message>
 162         <message>
 163             <source>GEOM_BASE_POINT</source>
 164             <translation>Base Point</translation>
 165         </message>
 166         <message>
 167             <source>GEOM_BEZIER</source>
 168             <translation>Bezier</translation>
 169         </message>
 170         <message>
 171             <source>GEOM_BINORMAL</source>
 172             <translation>BiNormal</translation>
 173         </message>
 174         <message>
 175             <source>GEOM_BLOCK</source>
 176             <translation>Hexahedral Solid</translation>
 177         </message>
 178         <message>
 179             <source>GEOM_BLOCKS_COMPOUND</source>
 180             <translation>BlocksCompound</translation>
 181         </message>
 182         <message>
 183             <source>GEOM_BLOCK_EXPLODE</source>
 184             <translation>Sub Blocks</translation>
 185         </message>
 186         <message>
 187             <source>GEOM_BLOCK_EXPLODE_TITLE</source>
 188             <translation>Sub Blocks Selection</translation>
 189         </message>
 190         <message>
 191             <source>GEOM_BLOCK_MULTITRSF</source>
 192             <translation>Block Multi-Transformation</translation>
 193         </message>
 194         <message>
 195             <source>GEOM_BLOCK_MULTITRSF_DOUBLE</source>
 196             <translation>Multi-Transformation Double</translation>
 197         </message>
 198         <message>
 199             <source>GEOM_BLOCK_MULTITRSF_SIMPLE</source>
 200             <translation>Multi-Transformation Simple</translation>
 201         </message>
 202         <message>
 203             <source>GEOM_BLOCK_MULTITRSF_TITLE</source>
 204             <translation>Block Multi-Transformation</translation>
 205         </message>
 206         <message>
 207             <source>GEOM_BLOCK_TITLE</source>
 208             <translation>Hexahedral Solid Construction</translation>
 209         </message>
 210         <message>
 211             <source>GEOM_BNDBOX</source>
 212             <translation>Bounding Box</translation>
 213         </message>
 214         <message>
 215             <source>GEOM_BNDBOX_OBJDIM</source>
 216             <translation>Object And Its Dimensions</translation>
 217         </message>
 218         <message>
 219             <source>GEOM_BNDBOX_TITLE</source>
 220             <translation>Bounding Box Informations</translation>
 221         </message>
 222         <message>
 223             <source>GEOM_BOX</source>
 224             <translation>Box</translation>
 225         </message>
 226         <message>
 227             <source>GEOM_BOX_OBJ</source>
 228             <translation>Dimensions At Origin</translation>
 229         </message>
 230         <message>
 231             <source>GEOM_BOX_TITLE</source>
 232             <translation>Box Construction</translation>
 233         </message>
 234         <message>
 235             <source>GEOM_BSplineRestriction</source>
 236             <translation>BSplineRestriction</translation>
 237         </message>
 238         <message>
 239             <source>GEOM_BUT_APPLY</source>
 240             <translation>&amp;Apply</translation>
 241         </message>
 242         <message>
 243             <source>GEOM_BUT_CANCEL</source>
 244             <translation>&amp;Cancel</translation>
 245         </message>
 246         <message>
 247             <source>GEOM_BUT_CLOSE</source>
 248             <translation>&amp;Close</translation>
 249         </message>
 250         <message>
 251             <source>GEOM_BUT_CLOSE_SKETCH</source>
 252             <translation>Sketch Closure</translation>
 253         </message>
 254         <message>
 255             <source>GEOM_BUT_END_SKETCH</source>
 256             <translation>Sketch Validation</translation>
 257         </message>
 258         <message>
 259             <source>GEOM_BUT_EXPLODE</source>
 260             <translation>&amp;Explode</translation>
 261         </message>
 262         <message>
 263             <source>GEOM_BUT_HELP</source>
 264             <translation>&amp;Help</translation>
 265         </message>
 266         <message>
 267             <source>GEOM_BUT_NO</source>
 268             <translation>&amp;No</translation>
 269         </message>
 270         <message>
 271             <source>GEOM_BUT_OK</source>
 272             <translation>O&amp;k</translation>
 273         </message>
 274         <message>
 275             <source>GEOM_BUT_APPLY_AND_CLOSE</source>
 276             <translation>A&amp;pply and Close</translation>
 277         </message>
 278         <message>
 279             <source>GEOM_BUT_YES</source>
 280             <translation>&amp;Yes</translation>
 281         </message>
 282         <message>
 283             <source>GEOM_BY_LENGTH</source>
 284             <translation>By length</translation>
 285         </message>
 286         <message>
 287             <source>GEOM_BY_PARAMETER</source>
 288             <translation>By parameter</translation>
 289         </message>
 290         <message>
 291             <source>GEOM_CENTER</source>
 292             <translation>Center</translation>
 293         </message>
 294         <message>
 295             <source>GEOM_CENTER_POINT</source>
 296             <translation>Center Point</translation>
 297         </message>
 298         <message>
 299             <source>GEOM_CENTRAL_POINT</source>
 300             <translation>Central Point</translation>
 301         </message>
 302         <message>
 303             <source>GEOM_CHAMFER</source>
 304             <translation>Chamfer</translation>
 305         </message>
 306         <message>
 307             <source>GEOM_CHAMFER_ABORT</source>
 308             <translation>Chamfer can't be computed with %1 and %2</translation>
 309         </message>
 310         <message>
 311             <source>GEOM_CHAMFER_ALL</source>
 312             <translation>Chamfer On Whole Shape</translation>
 313         </message>
 314         <message>
 315             <source>GEOM_CHAMFER_EDGES</source>
 316             <translation>Chamfer On Edges From Shape</translation>
 317         </message>
 318         <message>
 319             <source>GEOM_CHAMFER_FACES</source>
 320             <translation>Chamfer On Faces From Shape</translation>
 321         </message>
 322         <message>
 323             <source>GEOM_CHAMFER_TITLE</source>
 324             <translation>Chamfer Construction</translation>
 325         </message>
 326         <message>
 327             <source>GEOM_CHANGE_ORIENTATION</source>
 328             <translation>Objects to change orientation</translation>
 329         </message>
 330         <message>
 331             <source>GEOM_CHANGE_ORIENTATION_TITLE</source>
 332             <translation>Change orientation</translation>
 333         </message>
 334         <message>
 335             <source>GEOM_CHECK_BLOCKS_COMPOUND</source>
 336             <translation>Check and Improve Blocks Compound</translation>
 337         </message>
 338         <message>
 339             <source>GEOM_CHECK_BLOCKS_COMPOUND_ERRORS</source>
 340             <translation>Errors</translation>
 341         </message>
 342         <message>
 343             <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS</source>
 344             <translation>The Compound of Blocks has errors</translation>
 345         </message>
 346         <message>
 347             <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS</source>
 348             <translation>The Compound of Blocks has no errors</translation>
 349         </message>
 350         <message>
 351             <source>GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES</source>
 352             <translation>Incriminated Sub-Shapes</translation>
 353         </message>
 354         <message>
 355             <source>GEOM_CHECK_INFOS</source>
 356             <translation>Object And Its Topological Information</translation>
 357         </message>
 358         <message>
 359             <source>GEOM_CHECK_SHAPE</source>
 360             <translation>Check Shape</translation>
 361         </message>
 362         <message>
 363             <source>GEOM_CHECK_TITLE</source>
 364             <translation>Check Shape Information</translation>
 365         </message>
 366         <message>
 367             <source>GEOM_CIRCLE</source>
 368             <translation>Circle</translation>
 369         </message>
 370         <message>
 371             <source>GEOM_CIRCLE_TITLE</source>
 372             <translation>Circle Construction</translation>
 373         </message>
 374         <message>
 375             <source>GEOM_CLOSECONTOUR_TITLE</source>
 376             <translation>Close contour</translation>
 377         </message>
 378         <message>
 379             <source>GEOM_CMASS</source>
 380             <translation>Center Of Mass</translation>
 381         </message>
 382         <message>
 383             <source>GEOM_CMASS_TITLE</source>
 384             <translation>Center Of Mass Construction</translation>
 385         </message>
 386         <message>
 387             <source>GEOM_COMMON</source>
 388             <translation>Common</translation>
 389         </message>
 390         <message>
 391             <source>GEOM_COMMON_TITLE</source>
 392             <translation>Common Of Two Objects</translation>
 393         </message>
 394         <message>
 395             <source>GEOM_COMPOUND</source>
 396             <translation>Compound</translation>
 397         </message>
 398         <message>
 399             <source>GEOM_COMPOUNDSOLID</source>
 400             <translation>CompSolid</translation>
 401         </message>
 402         <message>
 403             <source>GEOM_COMPOUND_TITLE</source>
 404             <translation>Create A Compound</translation>
 405         </message>
 406         <message>
 407             <source>GEOM_CONE</source>
 408             <translation>Cone</translation>
 409         </message>
 410         <message>
 411             <source>GEOM_CONE_TITLE</source>
 412             <translation>Cone Construction</translation>
 413         </message>
 414         <message>
 415             <source>GEOM_CONFIRM</source>
 416             <translation>Confirm operation</translation>
 417         </message>
 418         <message>
 419             <source>GEOM_CONFIRM_INFO</source>
 420             <translation>Shape contains %1 sub shapes !</translation>
 421         </message>
 422         <message>
 423             <source>GEOM_COOR</source>
 424             <translation>Coord. :</translation>
 425         </message>
 426         <message>
 427             <source>GEOM_COORDINATES</source>
 428             <translation>Coordinates</translation>
 429         </message>
 430         <message>
 431             <source>GEOM_CREATE_COPY</source>
 432             <translation>Create a copy</translation>
 433         </message>
 434         <message>
 435             <source>GEOM_CREATE_SINGLE_SOLID</source>
 436             <translation>Create a single solid</translation>
 437         </message>
 438         <message>
 439             <source>GEOM_CURVE</source>
 440             <translation>Curve</translation>
 441         </message>
 442         <message>
 443             <source>GEOM_CURVE_CONTINUTY</source>
 444             <translation>Curve continuity</translation>
 445         </message>
 446         <message>
 447             <source>GEOM_CURVE_TITLE</source>
 448             <translation>Curve Construction</translation>
 449         </message>
 450         <message>
 451             <source>GEOM_CUT</source>
 452             <translation>Cut</translation>
 453         </message>
 454         <message>
 455             <source>GEOM_CUT_TITLE</source>
 456             <translation>Cut Of Two Objects</translation>
 457         </message>
 458         <message>
 459             <source>GEOM_CYLINDER</source>
 460             <translation>Cylinder</translation>
 461         </message>
 462         <message>
 463             <source>GEOM_CYLINDER_TITLE</source>
 464             <translation>Cylinder Construction</translation>
 465         </message>
 466         <message>
 467             <source>GEOM_D1</source>
 468             <translation>D1 :</translation>
 469         </message>
 470         <message>
 471             <source>GEOM_D2</source>
 472             <translation>D2 :</translation>
 473         </message>
 474         <message>
 475             <source>GEOM_DETECT</source>
 476             <translation>Detect</translation>
 477         </message>
 478         <message>
 479             <source>GEOM_DIAGONAL_POINTS</source>
 480             <translation>Diagonal Points</translation>
 481         </message>
 482         <message>
 483             <source>GEOM_DISK</source>
 484             <translation>Disk</translation>
 485         </message>
 486         <message>
 487             <source>GEOM_DISK_TITLE</source>
 488             <translation>Create A Disk</translation>
 489         </message>
 490         <message>
 491             <source>GEOM_DIMENSIONS</source>
 492             <translation>Dimensions</translation>
 493         </message>
 494         <message>
 495             <source>GEOM_DISTANCE</source>
 496             <translation>Distance</translation>
 497         </message>
 498         <message>
 499             <source>GEOM_DIVIDE_EDGE_TITLE</source>
 500             <translation>Addition of point</translation>
 501         </message>
 502         <message>
 503             <source>GEOM_DX</source>
 504             <translation>Dx :</translation>
 505         </message>
 506         <message>
 507             <source>GEOM_DY</source>
 508             <translation>Dy :</translation>
 509         </message>
 510         <message>
 511             <source>GEOM_DZ</source>
 512             <translation>Dz :</translation>
 513         </message>
 514         <message>
 515             <source>GEOM_DropSmallEdges</source>
 516             <translation>DropSmallEdges</translation>
 517         </message>
 518         <message>
 519             <source>GEOM_EDGE</source>
 520             <translation>Edge</translation>
 521         </message>
 522         <message>
 523             <source>GEOM_EDGE_TITLE</source>
 524             <translation>Create An Edge</translation>
 525         </message>
 526         <message>
 527             <source>GEOM_ELLIPSE</source>
 528             <translation>Ellipse</translation>
 529         </message>
 530         <message>
 531             <source>GEOM_ELLIPSE_ERROR_1</source>
 532             <translation>Error creating ellipse.  Reason: minor radius is greater than major radius.</translation>
 533         </message>
 534         <message>
 535             <source>GEOM_ELLIPSE_TITLE</source>
 536             <translation>Ellipse Construction</translation>
 537         </message>
 538         <message>
 539             <source>GEOM_END_LCS</source>
 540             <translation>End LCS</translation>
 541         </message>
 542         <message>
 543             <source>GEOM_ERROR</source>
 544             <translation>Error</translation>
 545         </message>
 546         <message>
 547             <source>GEOM_ERROR_STATUS</source>
 548             <translation>Operation status</translation>
 549         </message>
 550         <message>
 551             <source>GEOM_ERR_GET_ENGINE</source>
 552             <translation>Failed to obtain GEOM Engine component.  Reload Geometry module and try again.</translation>
 553         </message>
 554         <message>
 555             <source>GEOM_ERR_LIB_NOT_FOUND</source>
 556             <translation>GUI library corresponding to the user action can not be found or loaded</translation>
 557         </message>
 558         <message>
 559             <source>GEOM_EXTRUSION</source>
 560             <translation>Extrusion</translation>
 561         </message>
 562         <message>
 563             <source>GEOM_EXTRUSION_BSV</source>
 564             <translation>Base Shape + Vector</translation>
 565         </message>
 566         <message>
 567             <source>GEOM_EXTRUSION_BSV_2P</source>
 568             <translation>Base Shape + 2 Points</translation>
 569         </message>
 570         <message>
 571             <source>GEOM_EXTRUSION_DXDYDZ</source>
 572             <translation>Base Shape + DX DY DZ Vector</translation>
 573         </message>
 574         <message>
 575             <source>GEOM_EXTRUSION_TITLE</source>
 576             <translation>Construction by Extrusion</translation>
 577         </message>
 578         <message>
 579             <source>GEOM_FACE</source>
 580             <translation>Face</translation>
 581         </message>
 582         <message>
 583             <source>GEOM_LCS</source>
 584             <translation>Local coordinate system</translation>
 585         </message>
 586         <message>
 587             <source>GEOM_FACES</source>
 588             <translation>Faces</translation>
 589         </message>
 590         <message>
 591             <source>GEOM_FACE_FFW</source>
 592             <translation>Face creation from wires and/or edges</translation>
 593         </message>
 594         <message>
 595             <source>GEOM_FACE_OPT</source>
 596             <translation>Try to create a planar face</translation>
 597         </message>
 598         <message>
 599             <source>GEOM_FACE_OR_LCS</source>
 600             <translation>Face or LCS</translation>
 601         </message>
 602         <message>
 603             <source>GEOM_FACE_SELECTION</source>
 604             <translation>Face Selection</translation>
 605         </message>
 606         <message>
 607             <source>GEOM_FACE_TITLE</source>
 608             <translation>Create A Face</translation>
 609         </message>
 610         <message>
 611             <source>GEOM_FILLET</source>
 612             <translation>Fillet</translation>
 613         </message>
 614         <message>
 615             <source>GEOM_FILLET_2D</source>
 616             <translation>Fillet 2D</translation>
 617         </message>
 618         <message>
 619             <source>GEOM_FILLET_ABORT</source>
 620             <translation>Fillet can't be computed with radius %1</translation>
 621         </message>
 622         <message>
 623             <source>GEOM_FILLET_ALL</source>
 624             <translation>Fillet On Whole Shape</translation>
 625         </message>
 626         <message>
 627             <source>GEOM_FILLET_EDGES</source>
 628             <translation>Fillet On Edges From Shape</translation>
 629         </message>
 630         <message>
 631             <source>GEOM_FILLET_FACES</source>
 632             <translation>Fillet On Faces From Shape</translation>
 633         </message>
 634         <message>
 635             <source>GEOM_FILLET_VERTEXES</source>
 636             <translation>Fillet On Vertexes From Face</translation>
 637         </message>
 638         <message>
 639             <source>GEOM_FILLET_TITLE</source>
 640             <translation>Fillet Construction</translation>
 641         </message>
 642         <message>
 643             <source>GEOM_FILLET_2D_TITLE</source>
 644             <translation>2D Fillet Construction</translation>
 645         </message>
 646         <message>
 647             <source>GEOM_FILLING</source>
 648             <translation>Filling</translation>
 649         </message>
 650         <message>
 651             <source>GEOM_FILLING_ARG</source>
 652             <translation>Arguments And Parameters</translation>
 653         </message>
 654         <message>
 655             <source>GEOM_FILLING_COMPOUND</source>
 656             <translation>Edges compound</translation>
 657         </message>
 658         <message>
 659             <source>GEOM_FILLING_MAX_DEG</source>
 660             <translation>Max deg</translation>
 661         </message>
 662         <message>
 663             <source>GEOM_FILLING_MIN_DEG</source>
 664             <translation>Min deg</translation>
 665         </message>
 666         <message>
 667             <source>GEOM_FILLING_NB_ITER</source>
 668             <translation>Nb. Iter :</translation>
 669         </message>
 670         <message>
 671             <source>GEOM_FILLING_TITLE</source>
 672             <translation>Filling Surface With Edges</translation>
 673         </message>
 674         <message>
 675             <source>GEOM_FILLING_TOL_2D</source>
 676             <translation>Tol. 2D :</translation>
 677         </message>
 678         <message>
 679             <source>GEOM_FILLING_TOL_3D</source>
 680             <translation>Tol. 3D :</translation>
 681         </message>
 682         <message>
 683             <source>GEOM_FREE_BOUNDARIES</source>
 684             <translation>Free boundaries</translation>
 685         </message>
 686         <message>
 687             <source>GEOM_FREE_BOUNDS_ERROR</source>
 688             <translation>Object is not selected</translation>
 689         </message>
 690         <message>
 691             <source>GEOM_FREE_BOUNDS_MSG</source>
 692             <translation>Number of free boundaries detected: %1 (%2 closed, %3 open)</translation>
 693         </message>
 694         <message>
 695             <source>GEOM_FREE_BOUNDS_TLT</source>
 696             <translation>Free boundary detection</translation>
 697         </message>
 698         <message>
 699             <source>GEOM_FREE_FACES</source>
 700             <translation>Free faces</translation>
 701         </message>
 702         <message>
 703             <source>GEOM_FREE_FACES_TITLE</source>
 704             <translation>Free faces</translation>
 705         </message>
 706         <message>
 707             <source>GEOM_FUSE</source>
 708             <translation>Fuse</translation>
 709         </message>
 710         <message>
 711             <source>GEOM_FUSE_TITLE</source>
 712             <translation>Fuse Two Objects</translation>
 713         </message>
 714         <message>
 715             <source>GEOM_FixFaceSize</source>
 716             <translation>FixFaceSize</translation>
 717         </message>
 718         <message>
 719             <source>GEOM_FixShape</source>
 720             <translation>FixShape</translation>
 721         </message>
 722         <message>
 723             <source>GEOM_GLUE</source>
 724             <translation>Glue</translation>
 725         </message>
 726         <message>
 727             <source>GEOM_GLUE_TITLE</source>
 728             <translation>Glue faces</translation>
 729         </message>
 730         <message>
 731             <source>GEOM_HEIGHT</source>
 732             <translation>Height :</translation>
 733         </message>
 734         <message>
 735             <source>GEOM_HOLES</source>
 736             <translation>Holes</translation>
 737         </message>
 738         <message>
 739             <source>GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE</source>
 740             <translation>Identical names : select by mouse !</translation>
 741         </message>
 742         <message>
 743             <source>GEOM_IMPORT</source>
 744             <translation>Imported_Shape</translation>
 745         </message>
 746         <message>
 747             <source>GEOM_INCORRECT_INPUT</source>
 748             <translation>Some parameters are missing</translation>
 749         </message>
 750         <message>
 751             <source>GEOM_INERTIA_CONSTR</source>
 752             <translation>Matrix And Moments Of Inertia</translation>
 753         </message>
 754         <message>
 755             <source>GEOM_INERTIA_I</source>
 756             <translation>%1:1 :</translation>
 757         </message>
 758         <message>
 759             <source>GEOM_INERTIA_IXYZ</source>
 760             <translation>IX &amp; IY &amp; IZ :</translation>
 761         </message>
 762         <message>
 763             <source>GEOM_INERTIA_TITLE</source>
 764             <translation>Calculs Of Inertia</translation>
 765         </message>
 766         <message>
 767             <source>GEOM_INF_LOADED</source>
 768             <translation>File %1 loaded.</translation>
 769         </message>
 770         <message>
 771             <source>GEOM_INTERNAL_WIRES</source>
 772             <translation>Internal wires</translation>
 773         </message>
 774         <message>
 775             <source>GEOM_INTERPOL</source>
 776             <translation>Interpolation</translation>
 777         </message>
 778         <message>
 779             <source>GEOM_KEEP_OBJECT</source>
 780             <translation>Keep Object</translation>
 781         </message>
 782         <message>
 783             <source>GEOM_LENGTH</source>
 784             <translation>Length :</translation>
 785         </message>
 786         <message>
 787             <source>GEOM_LINE</source>
 788             <translation>Line</translation>
 789         </message>
 790         <message>
 791             <source>GEOM_LINE_TITLE</source>
 792             <translation>Line Construction</translation>
 793         </message>
 794         <message>
 795             <source>GEOM_MAIN_OBJECT</source>
 796             <translation>Main Object</translation>
 797         </message>
 798         <message>
 799             <source>GEOM_MARKER</source>
 800             <translation>Marker</translation>
 801         </message>
 802         <message>
 803             <source>GEOM_MARKER_TITLE</source>
 804             <translation>Create marker</translation>
 805         </message>
 806         <message>
 807             <source>GEOM_MATERIAL_ID</source>
 808             <translation>Material ID:</translation>
 809         </message>
 810         <message>
 811             <source>GEOM_MATERIAL_MATERIAL</source>
 812             <translation>Material</translation>
 813         </message>
 814         <message>
 815             <source>GEOM_MATERIAL_SET</source>
 816             <translation>&lt;&lt; Set</translation>
 817         </message>
 818         <message>
 819             <source>GEOM_MATERIAL_SHAPE</source>
 820             <translation>Shapes</translation>
 821         </message>
 822         <message>
 823             <source>GEOM_MATERIAL_TITLE</source>
 824             <translation>Define materials for Dominant Fuse</translation>
 825         </message>
 826         <message>
 827             <source>GEOM_MATRIX</source>
 828             <translation>Matrix :</translation>
 829         </message>
 830         <message>
 831             <source>GEOM_MAX</source>
 832             <translation>Max :</translation>
 833         </message>
 834         <message>
 835             <source>GEOM_MAX_3D_TOLERANCE</source>
 836             <translation>Max 3D tolerance</translation>
 837         </message>
 838         <message>
 839             <source>GEOM_MAX_TOLERANCE</source>
 840             <translation>Max tolerance</translation>
 841         </message>
 842         <message>
 843             <source>GEOM_MEN_ALL_FILES</source>
 844             <translation>All Files ( * )</translation>
 845         </message>
 846         <message>
 847             <source>GEOM_MEN_ANGLE</source>
 848             <translation>Angle :</translation>
 849         </message>
 850         <message>
 851             <source>GEOM_MEN_COMPONENT</source>
 852             <translation>Geometry</translation>
 853         </message>
 854         <message>
 855             <source>GEOM_MEN_ENTER_ANGLE</source>
 856             <translation>Enter An Angle In Degrees</translation>
 857         </message>
 858         <message>
 859             <source>GEOM_MEN_EXPORT</source>
 860             <translation>Export</translation>
 861         </message>
 862         <message>
 863             <source>GEOM_MEN_IMPORT</source>
 864             <translation>Import</translation>
 865         </message>
 866         <message>
 867             <source>GEOM_MEN_ISOS</source>
 868             <translation>Select Number Of Isos</translation>
 869         </message>
 870         <message>
 871             <source>GEOM_MEN_ISOU</source>
 872             <translation>Isos U :</translation>
 873         </message>
 874         <message>
 875             <source>GEOM_MEN_ISOV</source>
 876             <translation>Isos V :</translation>
 877         </message>
 878         <message>
 879             <source>GEOM_MEN_POPUP_NAME</source>
 880             <translation>%1 Objects</translation>
 881         </message>
 882         <message>
 883             <source>GEOM_MEN_SHADING</source>
 884             <translation>Shading</translation>
 885         </message>
 886         <message>
 887             <source>GEOM_MEN_SKETCHER_X</source>
 888             <translation>Enter a Length to Set X</translation>
 889         </message>
 890         <message>
 891             <source>GEOM_MEN_SKETCHER_Y</source>
 892             <translation>Enter a Length to Set Y</translation>
 893         </message>
 894         <message>
 895             <source>GEOM_MEN_STEP_LABEL</source>
 896             <translation>Step :</translation>
 897         </message>
 898         <message>
 899             <source>GEOM_MEN_TRANSPARENCY</source>
 900             <translation>Transparency</translation>
 901         </message>
 902         <message>
 903             <source>GEOM_MEN_TRANSPARENCY_LABEL</source>
 904             <translation>Transparency :</translation>
 905         </message>
 906         <message>
 907             <source>GEOM_MEN_WIREFRAME</source>
 908             <translation>Wireframe</translation>
 909         </message>
 910         <message>
 911             <source>GEOM_MEN_X</source>
 912             <translation>X :</translation>
 913         </message>
 914         <message>
 915             <source>GEOM_MEN_Y</source>
 916             <translation>Y :</translation>
 917         </message>
 918         <message>
 919             <source>GEOM_MESHING_DEFLECTION</source>
 920             <translation>Meshing Deflect. :</translation>
 921         </message>
 922         <message>
 923             <source>GEOM_MIN</source>
 924             <translation>Min :</translation>
 925         </message>
 926         <message>
 927             <source>GEOM_MINDIST_OBJ</source>
 928             <translation>Objects And Results</translation>
 929         </message>
 930         <message>
 931             <source>GEOM_MINDIST_TITLE</source>
 932             <translation>Minimun Distance Between Two Objects</translation>
 933         </message>
 934         <message>
 935             <source>GEOM_MIRROR</source>
 936             <translation>Mirror</translation>
 937         </message>
 938         <message>
 939             <source>GEOM_MIRROR_TITLE</source>
 940             <translation>Mirror An Object</translation>
 941         </message>
 942         <message>
 943             <source>GEOM_MULTIROTATION</source>
 944             <translation>Multi-Rotation</translation>
 945         </message>
 946         <message>
 947             <source>GEOM_MULTIROTATION_DOUBLE</source>
 948             <translation>Multi Rotation Double</translation>
 949         </message>
 950         <message>
 951             <source>GEOM_MULTIROTATION_SIMPLE</source>
 952             <translation>Multi Rotation Simple</translation>
 953         </message>
 954         <message>
 955             <source>GEOM_MULTIROTATION_TITLE</source>
 956             <translation>Multi-Rotation</translation>
 957         </message>
 958         <message>
 959             <source>GEOM_MULTITRANSLATION</source>
 960             <translation>Multi-Translation</translation>
 961         </message>
 962         <message>
 963             <source>GEOM_MULTITRANSLATION_DOUBLE</source>
 964             <translation>Multi Translation Double</translation>
 965         </message>
 966         <message>
 967             <source>GEOM_MULTITRANSLATION_SIMPLE</source>
 968             <translation>Multi Translation Simple</translation>
 969         </message>
 970         <message>
 971             <source>GEOM_MULTITRANSLATION_TITLE</source>
 972             <translation>Multi-Translation</translation>
 973         </message>
 974         <message>
 975             <source>GEOM_NAME_INCORRECT</source>
 976             <translation>Object name not found</translation>
 977         </message>
 978         <message>
 979             <source>GEOM_NB_BLOCKS_NO_OTHERS</source>
 980             <translation>There are %1 specified blocks and NO other solids</translation>
 981         </message>
 982         <message>
 983             <source>GEOM_NB_BLOCKS_SOME_OTHERS</source>
 984             <translation>There are %1 specified blocks and some other solids</translation>
 985         </message>
 986         <message>
 987             <source>GEOM_NB_TIMES</source>
 988             <translation>Nb. Times :</translation>
 989         </message>
 990         <message>
 991             <source>GEOM_NB_TIMES_U</source>
 992             <translation>Nb. Times U :</translation>
 993         </message>
 994         <message>
 995             <source>GEOM_NB_TIMES_V</source>
 996             <translation>Nb. Times V :</translation>
 997         </message>
 998         <message>
 999             <source>GEOM_NODES</source>
1000             <translation>Nodes</translation>
1001         </message>
1002         <message>
1003             <source>GEOM_NUM_SPLIT_POINTS</source>
1004             <translation>Number of splitting points</translation>
1005         </message>
1006         <message>
1007             <source>GEOM_OBJECT</source>
1008             <translation>Object</translation>
1009         </message>
1010         <message>
1011             <source>GEOM_OBJECT_TYPE</source>
1012             <translation>Object Type</translation>
1013         </message>
1014         <message>
1015             <source>GEOM_OBJECTS</source>
1016             <translation>Objects</translation>
1017         </message>
1018         <message>
1019             <source>GEOM_OBJECT_I</source>
1020             <translation>Object %1</translation>
1021         </message>
1022         <message>
1023             <source>GEOM_OBJECT_RESULT</source>
1024             <translation>Object And Result</translation>
1025         </message>
1026         <message>
1027             <source>GEOM_OFFSET</source>
1028             <translation>Offset</translation>
1029         </message>
1030         <message>
1031             <source>GEOM_OFFSET_TITLE</source>
1032             <translation>Offset Surface</translation>
1033         </message>
1034         <message>
1035             <source>GEOM_OPERATIONS</source>
1036             <translation>Operations</translation>
1037         </message>
1038         <message>
1039             <source>GEOM_ORIENTATION</source>
1040             <translation>Orientation</translation>
1041         </message>
1042         <message>
1043             <source>GEOM_ORIENTATION_OPT</source>
1044             <translation>Reverse orientation with normal vectors simulation</translation>
1045         </message>
1046         <message>
1047             <source>GEOM_ORIENTATION_TITLE</source>
1048             <translation>Change Orientation</translation>
1049         </message>
1050         <message>
1051             <source>GEOM_PARAMETER</source>
1052             <translation>Parameter :</translation>
1053         </message>
1054         <message>
1055             <source>GEOM_PARAMETERS</source>
1056             <translation>Parameters</translation>
1057         </message>
1058         <message>
1059             <source>GEOM_PARAM_POINT</source>
1060             <translation>Parametric point</translation>
1061         </message>
1062         <message>
1063             <source>GEOM_PARTITION</source>
1064             <translation>Partition</translation>
1065         </message>
1066         <message>
1067             <source>GEOM_PARTITION_HALFSPACE</source>
1068             <translation>Half-space partition</translation>
1069         </message>
1070         <message>
1071             <source>GEOM_PARTITION_ORIENTATION</source>
1072             <translation>Change Orientation</translation>
1073         </message>
1074         <message>
1075             <source>GEOM_PARTITION_TITLE</source>
1076             <translation>Partition Of Object With Tool</translation>
1077         </message>
1078         <message>
1079             <source>GEOM_PATH_OBJECT</source>
1080             <translation>Path Object</translation>
1081         </message>
1082         <message>
1083             <source>GEOM_PIPE</source>
1084             <translation>Pipe</translation>
1085         </message>
1086         <message>
1087             <source>GEOM_PIPE_TITLE</source>
1088             <translation>Pipe Construction</translation>
1089         </message>
1090         <message>
1091             <source>GEOM_SELECT_UNPUBLISHED_EDGES</source>
1092             <translation>Select unpublished edges</translation>
1093         </message>
1094         <message>
1095             <source>GEOM_PLANE</source>
1096             <translation>Plane</translation>
1097         </message>
1098         <message>
1099             <source>GEOM_PLANE_MIRROR</source>
1100             <translation>Plane Mirror</translation>
1101         </message>
1102         <message>
1103             <source>GEOM_PLANE_PV</source>
1104             <translation>Point + Vector</translation>
1105         </message>
1106         <message>
1107             <source>GEOM_PLANE_PVC</source>
1108             <translation>Point + Coordinate Vector</translation>
1109         </message>
1110         <message>
1111             <source>GEOM_PLANE_SIZE</source>
1112             <translation>Size of plane :</translation>
1113         </message>
1114         <message>
1115             <source>GEOM_PLANE_TITLE</source>
1116             <translation>Plane Construction</translation>
1117         </message>
1118         <message>
1119             <source>GEOM_POINT</source>
1120             <translation>Point</translation>
1121         </message>
1122         <message>
1123             <source>GEOM_POINT1</source>
1124             <translation>Point 1</translation>
1125         </message>
1126         <message>
1127             <source>GEOM_POINT2</source>
1128             <translation>Point 2</translation>
1129         </message>
1130         <message>
1131             <source>GEOM_POINT3</source>
1132             <translation>Point 3</translation>
1133         </message>
1134         <message>
1135             <source>GEOM_POINTS</source>
1136             <translation>Points</translation>
1137         </message>
1138         <message>
1139             <source>GEOM_POINT_I</source>
1140             <translation>Point %1</translation>
1141         </message>
1142         <message>
1143             <source>GEOM_POINT_MIRROR</source>
1144             <translation>Point Mirror</translation>
1145         </message>
1146         <message>
1147             <source>GEOM_POINT_TITLE</source>
1148             <translation>Point Construction</translation>
1149         </message>
1150         <message>
1151             <source>GEOM_POLYLINE</source>
1152             <translation>Polyline</translation>
1153         </message>
1154         <message>
1155             <source>GEOM_POSITION</source>
1156             <translation>Location</translation>
1157         </message>
1158         <message>
1159             <source>GEOM_POSITION_TITLE</source>
1160             <translation>Modify the Location of an Object</translation>
1161         </message>
1162         <message>
1163             <source>GEOM_PRECISION</source>
1164             <translation>Precision :</translation>
1165         </message>
1166         <message>
1167             <source>GEOM_PROPAGATE</source>
1168             <translation>Propagate</translation>
1169         </message>
1170         <message>
1171             <source>GEOM_PROPAGATE_TITLE</source>
1172             <translation>Propagate</translation>
1173         </message>
1174         <message>
1175             <source>GEOM_PROPERTIES</source>
1176             <translation>Basic Properties</translation>
1177         </message>
1178         <message>
1179             <source>GEOM_PROPERTIES_CONSTR</source>
1180             <translation>Object And Its Properties</translation>
1181         </message>
1182         <message>
1183             <source>GEOM_PROPERTIES_SURFACE</source>
1184             <translation>Surface is :</translation>
1185         </message>
1186         <message>
1187             <source>GEOM_PROPERTIES_TITLE</source>
1188             <translation>Basic Properties Informations</translation>
1189         </message>
1190         <message>
1191             <source>GEOM_PROPERTIES_VOLUME</source>
1192             <translation>Volume is :</translation>
1193         </message>
1194         <message>
1195             <source>GEOM_PRP_ABORT</source>
1196             <translation>Operation aborted</translation>
1197         </message>
1198         <message>
1199             <source>GEOM_PRP_COMMAND</source>
1200             <translation>No command associated with this id = %1.</translation>
1201         </message>
1202         <message>
1203             <source>GEOM_PRP_DONE</source>
1204             <translation>Operation done</translation>
1205         </message>
1206         <message>
1207             <source>GEOM_PRP_EXPORT</source>
1208             <translation>Exporting geometry to %1 ...</translation>
1209         </message>
1210         <message>
1211             <source>GEOM_PRP_LOADING</source>
1212             <translation>Loading %1 ...</translation>
1213         </message>
1214         <message>
1215             <source>GEOM_PRP_MIN_DIST</source>
1216             <translation>Min Distance not computed</translation>
1217         </message>
1218         <message>
1219             <source>GEOM_PRP_NOT_FOR_VTK_VIEWER</source>
1220             <translation>Not allowed in VTK viewer</translation>
1221         </message>
1222         <message>
1223             <source>GEOM_PRP_NULLSHAPE</source>
1224             <translation>Error, null or inappropriate shape !</translation>
1225         </message>
1226         <message>
1227             <source>GEOM_PRP_READY</source>
1228             <translation>Ready</translation>
1229         </message>
1230         <message>
1231             <source>GEOM_PRP_SELECT_EDGE</source>
1232             <translation>Select edges and click on Apply</translation>
1233         </message>
1234         <message>
1235             <source>GEOM_PRP_SELECT_FACE</source>
1236             <translation>Select faces to suppress and click on Ok/Apply</translation>
1237         </message>
1238         <message>
1239             <source>GEOM_PRP_SELECT_FIRST</source>
1240             <translation>Select main shape first</translation>
1241         </message>
1242         <message>
1243             <source>GEOM_PRP_SELECT_SUBSHAPES</source>
1244             <translation>Select Sub Shapes</translation>
1245         </message>
1246         <message>
1247             <source>GEOM_PRP_SHAPE_IN_STUDY</source>
1248             <translation>Main shape must be in the study before</translation>
1249         </message>
1250         <message>
1251             <source>GEOM_QUAD_FACE</source>
1252             <translation>Quadrangle Face</translation>
1253         </message>
1254         <message>
1255             <source>GEOM_QUAD_FACE_TITLE</source>
1256             <translation>Quadrangle Face Construction</translation>
1257         </message>
1258         <message>
1259             <source>GEOM_RADIUS</source>
1260             <translation>Radius :</translation>
1261         </message>
1262         <message>
1263             <source>GEOM_RADIUS_I</source>
1264             <translation>Radius %1 :</translation>
1265         </message>
1266         <message>
1267             <source>GEOM_RADIUS_MAJOR</source>
1268             <translation>Major radius :</translation>
1269         </message>
1270         <message>
1271             <source>GEOM_RADIUS_MINOR</source>
1272             <translation>Minor radius :</translation>
1273         </message>
1274         <message>
1275             <source>GEOM_RECONSTRUCTION_LIMIT</source>
1276             <translation>Resulting Type</translation>
1277         </message>
1278         <message>
1279             <source>GEOM_RECONSTRUCTION_LIMIT_EDGE</source>
1280             <translation>Edge</translation>
1281         </message>
1282         <message>
1283             <source>GEOM_RECONSTRUCTION_LIMIT_FACE</source>
1284             <translation>Face</translation>
1285         </message>
1286         <message>
1287             <source>GEOM_RECONSTRUCTION_LIMIT_SHAPE</source>
1288             <translation>Shape</translation>
1289         </message>
1290         <message>
1291             <source>GEOM_RECONSTRUCTION_LIMIT_SHELL</source>
1292             <translation>Shell</translation>
1293         </message>
1294         <message>
1295             <source>GEOM_RECONSTRUCTION_LIMIT_SOLID</source>
1296             <translation>Solid</translation>
1297         </message>
1298         <message>
1299             <source>GEOM_RECONSTRUCTION_LIMIT_VERTEX</source>
1300             <translation>Vertex</translation>
1301         </message>
1302         <message>
1303             <source>GEOM_RECONSTRUCTION_LIMIT_WIRE</source>
1304             <translation>Wire</translation>
1305         </message>
1306         <message>
1307             <source>GEOM_REF_POINT</source>
1308             <translation>Point with reference</translation>
1309         </message>
1310         <message>
1311             <source>GEOM_REMOVE_ALL_HOLES</source>
1312             <translation>Remove all holes</translation>
1313         </message>
1314         <message>
1315             <source>GEOM_REMOVE_ALL_INT_WIRES</source>
1316             <translation>Remove all internal wires</translation>
1317         </message>
1318         <message>
1319             <source>GEOM_REMOVE_HOLES_TITLE</source>
1320             <translation>Suppress holes</translation>
1321         </message>
1322         <message>
1323             <source>GEOM_REMOVE_INTERNAL_WIRES_TITLE</source>
1324             <translation>Suppress internal wires</translation>
1325         </message>
1326         <message>
1327             <source>GEOM_REMOVE_WEBS</source>
1328             <translation>Remove webs</translation>
1329         </message>
1330         <message>
1331             <source>GEOM_REQUIRED_DEGREE</source>
1332             <translation>Required degree</translation>
1333         </message>
1334         <message>
1335             <source>GEOM_REQUIRED_NUM_SEGMENTS</source>
1336             <translation>Required number of segments</translation>
1337         </message>
1338         <message>
1339             <source>GEOM_REVERSE</source>
1340             <translation>Reverse</translation>
1341         </message>
1342         <message>
1343             <source>GEOM_REVERSE_DIRECTION</source>
1344             <translation>Reverse Direction</translation>
1345         </message>
1346         <message>
1347             <source>GEOM_REVERSE_PLANE</source>
1348             <translation>Reverse the plane normal</translation>
1349         </message>
1350         <message>
1351             <source>GEOM_REVERSE_U</source>
1352             <translation>Reverse U</translation>
1353         </message>
1354         <message>
1355             <source>GEOM_REVERSE_V</source>
1356             <translation>Reverse V</translation>
1357         </message>
1358         <message>
1359             <source>GEOM_REVERSE_VECTOR</source>
1360             <translation>Reverse Vector</translation>
1361         </message>
1362         <message>
1363             <source>GEOM_REVOLUTION</source>
1364             <translation>Revolution</translation>
1365         </message>
1366         <message>
1367             <source>GEOM_REVOLUTION_TITLE</source>
1368             <translation>Construction By Revolution</translation>
1369         </message>
1370         <message>
1371             <source>GEOM_ROTATION</source>
1372             <translation>Rotation</translation>
1373         </message>
1374         <message>
1375             <source>GEOM_ROTATION_TITLE</source>
1376             <translation>Rotation Of An Object</translation>
1377         </message>
1378         <message>
1379             <source>GEOM_SCALE</source>
1380             <translation>Scale</translation>
1381         </message>
1382         <message>
1383             <source>GEOM_SCALE_FACTOR</source>
1384             <translation>Scale Factor :</translation>
1385         </message>
1386         <message>
1387             <source>GEOM_SCALE_TITLE</source>
1388             <translation>Scale An Object</translation>
1389         </message>
1390         <message>
1391             <source>GEOM_SECTION</source>
1392             <translation>Section</translation>
1393         </message>
1394         <message>
1395             <source>GEOM_SECTION_TITLE</source>
1396             <translation>Section Of Two Objects</translation>
1397         </message>
1398         <message>
1399             <source>GEOM_SELECTED_FACE</source>
1400             <translation>Selected face</translation>
1401         </message>
1402         <message>
1403             <source>GEOM_SELECTED_OBJECTS</source>
1404             <translation>Selected objects</translation>
1405         </message>
1406         <message>
1407             <source>GEOM_SELECTED_SHAPE</source>
1408             <translation>Selected shape</translation>
1409         </message>
1410         <message>
1411             <source>GEOM_SELECTION</source>
1412             <translation>Selection</translation>
1413         </message>
1414         <message>
1415             <source>GEOM_SET_MATERIALS</source>
1416             <translation>Set materials</translation>
1417         </message>
1418         <message>
1419             <source>GEOM_SEWING</source>
1420             <translation>Sewing</translation>
1421         </message>
1422         <message>
1423             <source>GEOM_SEWING_TITLE</source>
1424             <translation>Topological sewing</translation>
1425         </message>
1426         <message>
1427             <source>GEOM_SHAPE</source>
1428             <translation>Shape</translation>
1429         </message>
1430         <message>
1431             <source>GEOM_SHAPEPROCESS_TITLE</source>
1432             <translation>Shape Processing</translation>
1433         </message>
1434         <message>
1435             <source>GEOM_SHAPES</source>
1436             <translation>Shapes</translation>
1437         </message>
1438         <message>
1439             <source>GEOM_SHELL</source>
1440             <translation>Shell</translation>
1441         </message>
1442         <message>
1443             <source>GEOM_SHELLS</source>
1444             <translation>Shells</translation>
1445         </message>
1446         <message>
1447             <source>GEOM_SHELL_TITLE</source>
1448             <translation>Shell Construction</translation>
1449         </message>
1450         <message>
1451             <source>GEOM_SKETCHER_ABS</source>
1452             <translation>Absolute</translation>
1453         </message>
1454         <message>
1455             <source>GEOM_SKETCHER_ANGLE</source>
1456             <translation>Angle</translation>
1457         </message>
1458         <message>
1459             <source>GEOM_SKETCHER_ANGLE2</source>
1460             <translation>Angle :</translation>
1461         </message>
1462         <message>
1463             <source>GEOM_SKETCHER_APPLY</source>
1464             <translation>Apply</translation>
1465         </message>
1466         <message>
1467             <source>GEOM_SKETCHER_ARC</source>
1468             <translation>Arc</translation>
1469         </message>
1470         <message>
1471             <source>GEOM_SKETCHER_DEST</source>
1472             <translation>Destination</translation>
1473         </message>
1474         <message>
1475             <source>GEOM_SKETCHER_DIR</source>
1476             <translation>Direction</translation>
1477         </message>
1478         <message>
1479             <source>GEOM_SKETCHER_DX2</source>
1480             <translation>DX :</translation>
1481         </message>
1482         <message>
1483             <source>GEOM_SKETCHER_DY2</source>
1484             <translation>DY :</translation>
1485         </message>
1486         <message>
1487             <source>GEOM_SKETCHER_DZ2</source>
1488             <translation>DZ :</translation>
1489         </message>
1490         <message>
1491             <source>GEOM_SKETCHER_EL</source>
1492             <translation>Element Type</translation>
1493         </message>
1494         <message>
1495             <source>GEOM_SKETCHER_LENGTH</source>
1496             <translation>Length</translation>
1497         </message>
1498         <message>
1499             <source>GEOM_SKETCHER_LENGTH2</source>
1500             <translation>Length :</translation>
1501         </message>
1502         <message>
1503             <source>GEOM_SKETCHER_PER</source>
1504             <translation>Perpendicular</translation>
1505         </message>
1506         <message>
1507             <source>GEOM_SKETCHER_POINT</source>
1508             <translation>Point</translation>
1509         </message>
1510         <message>
1511             <source>GEOM_SKETCHER_POINT2</source>
1512             <translation>Point :</translation>
1513         </message>
1514         <message>
1515             <source>GEOM_SKETCHER_RADIUS2</source>
1516             <translation>Radius :</translation>
1517         </message>
1518         <message>
1519             <source>GEOM_SKETCHER_REL</source>
1520             <translation>Relative</translation>
1521         </message>
1522         <message>
1523             <source>GEOM_SKETCHER_SEGMENT</source>
1524             <translation>Segment</translation>
1525         </message>
1526         <message>
1527             <source>GEOM_SKETCHER_SEL</source>
1528             <translation>Selection</translation>
1529         </message>
1530         <message>
1531             <source>GEOM_SKETCHER_TAN</source>
1532             <translation>Tangent</translation>
1533         </message>
1534         <message>
1535             <source>GEOM_SKETCHER_TITLE</source>
1536             <translation>Sketch Construction</translation>
1537         </message>
1538         <message>
1539             <source>GEOM_3DSKETCHER_TITLE</source>
1540             <translation>3D Sketch Construction</translation>
1541         </message>
1542         <message>
1543             <source>GEOM_SKETCHER_TYPE</source>
1544             <translation>Type</translation>
1545         </message>
1546         <message>
1547             <source>GEOM_SKETCHER_UNDO</source>
1548             <translation>Undo</translation>
1549         </message>
1550         <message>
1551             <source>GEOM_SKETCHER_VALUES</source>
1552             <translation>Values</translation>
1553         </message>
1554         <message>
1555             <source>GEOM_SKETCHER_VX2</source>
1556             <translation>VX :</translation>
1557         </message>
1558         <message>
1559             <source>GEOM_SKETCHER_VXVY</source>
1560             <translation>VX-VY</translation>
1561         </message>
1562         <message>
1563             <source>GEOM_SKETCHER_VY2</source>
1564             <translation>VY :</translation>
1565         </message>
1566         <message>
1567             <source>GEOM_SKETCHER_X</source>
1568             <translation>X</translation>
1569         </message>
1570         <message>
1571             <source>GEOM_SKETCHER_X2</source>
1572             <translation>X :</translation>
1573         </message>
1574         <message>
1575             <source>GEOM_SKETCHER_X3</source>
1576             <translation>Abs. X :</translation>
1577         </message>
1578         <message>
1579             <source>GEOM_SKETCHER_Y</source>
1580             <translation>Y</translation>
1581         </message>
1582         <message>
1583             <source>GEOM_SKETCHER_Y2</source>
1584             <translation>Y :</translation>
1585         </message>
1586         <message>
1587             <source>GEOM_SKETCHER_Y3</source>
1588             <translation>Abs. Y :</translation>
1589         </message>
1590         <message>
1591             <source>GEOM_SKETCHER_Z2</source>
1592             <translation>Z :</translation>
1593         </message>
1594         <message>
1595             <source>GEOM_3DSKETCHER</source>
1596             <translation>3D Sketcher</translation>
1597         </message>
1598         <message>
1599             <source>GEOM_COORDINATES_TYPE</source>
1600             <translation>Coordinates Type</translation>
1601         </message>
1602         <message>
1603             <source>GEOM_SOLID</source>
1604             <translation>Solid</translation>
1605         </message>
1606         <message>
1607             <source>GEOM_SOLID_TITLE</source>
1608             <translation>Solid Construction</translation>
1609         </message>
1610         <message>
1611             <source>GEOM_SPHERE</source>
1612             <translation>Sphere</translation>
1613         </message>
1614         <message>
1615             <source>GEOM_SPHERE_CR</source>
1616             <translation>Center + Radius</translation>
1617         </message>
1618         <message>
1619             <source>GEOM_SPHERE_RO</source>
1620             <translation>Radius At Origin</translation>
1621         </message>
1622         <message>
1623             <source>GEOM_SPHERE_TITLE</source>
1624             <translation>Sphere Construction</translation>
1625         </message>
1626         <message>
1627             <source>GEOM_SPLINE</source>
1628             <translation>Spline</translation>
1629         </message>
1630         <message>
1631             <source>GEOM_SPLINE_TITLE</source>
1632             <translation>Spline Construction</translation>
1633         </message>
1634         <message>
1635             <source>GEOM_START_LCS</source>
1636             <translation>Start LCS</translation>
1637         </message>
1638         <message>
1639             <source>SELECT_UNPUBLISHED_EDGES</source>
1640             <translation>Select unpublished edges</translation>
1641         </message>
1642         <message>
1643             <source>GEOM_STEP</source>
1644             <translation>Step :</translation>
1645         </message>
1646         <message>
1647             <source>GEOM_STEP_TITLE</source>
1648             <translation>Step value for GUI constructions</translation>
1649         </message>
1650         <message>
1651             <source>GEOM_STEP_U</source>
1652             <translation>Step U :</translation>
1653         </message>
1654         <message>
1655             <source>GEOM_STEP_V</source>
1656             <translation>Step V :</translation>
1657         </message>
1658         <message>
1659             <source>GEOM_STUDY_LOCKED</source>
1660             <translation>The active study is locked and therefore cannot be modified</translation>
1661         </message>
1662         <message>
1663             <source>GEOM_SUBSHAPE_SELECT</source>
1664             <translation>Select Sub Shapes</translation>
1665         </message>
1666         <message>
1667             <source>GEOM_SUBSHAPE_TITLE</source>
1668             <translation>Sub Shapes Selection</translation>
1669         </message>
1670         <message>
1671             <source>GEOM_SUBSHAPE_TYPE</source>
1672             <translation>Sub Shapes Type :</translation>
1673         </message>
1674         <message>
1675             <source>GEOM_SUB_SHAPE</source>
1676             <translation>Sub Shapes</translation>
1677         </message>
1678         <message>
1679             <source>GEOM_SUPPRESSHOLE_FACE_SHELL</source>
1680             <translation>Face or shell</translation>
1681         </message>
1682         <message>
1683             <source>GEOM_SUPPRESSHOLE_SELECTFACE</source>
1684             <translation>Select the face with hole</translation>
1685         </message>
1686         <message>
1687             <source>GEOM_SUPPRESSHOLE_SELECTFACE_END</source>
1688             <translation>Select end face (if hole traversing)</translation>
1689         </message>
1690         <message>
1691             <source>GEOM_SUPPRESSHOLE_SELECTWIRE</source>
1692             <translation>Select wire on face</translation>
1693         </message>
1694         <message>
1695             <source>GEOM_SUPPRESSHOLE_SELECTWIRE_END</source>
1696             <translation>Select end wire (if hole traversing)</translation>
1697         </message>
1698         <message>
1699             <source>GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE</source>
1700             <translation>Select hole(s) on the face</translation>
1701         </message>
1702         <message>
1703             <source>GEOM_SUPPRESSHOLE_TITLE</source>
1704             <translation>Suppress holes</translation>
1705         </message>
1706         <message>
1707             <source>GEOM_SUPPRESS_RESULT</source>
1708             <translation>Suppress Result</translation>
1709         </message>
1710         <message>
1711             <source>GEOM_SUPPRESS_RESULT_INSIDE</source>
1712             <translation>Inside</translation>
1713         </message>
1714         <message>
1715             <source>GEOM_SUPPRESS_RESULT_OUTSIDE</source>
1716             <translation>Outside</translation>
1717         </message>
1718         <message>
1719             <source>GEOM_SUPRESSFACE</source>
1720             <translation>Supress Face</translation>
1721         </message>
1722         <message>
1723             <source>GEOM_SUPRESSFACE_SELECT</source>
1724             <translation>Select Faces To Suppress</translation>
1725         </message>
1726         <message>
1727             <source>GEOM_SUPRESSFACE_TITLE</source>
1728             <translation>Suppress Faces In An Object</translation>
1729         </message>
1730         <message>
1731             <source>GEOM_SURFACE_CONTINUTY</source>
1732             <translation>Surface continuity</translation>
1733         </message>
1734         <message>
1735             <source>GEOM_SURFACE_MODE</source>
1736             <translation>Surface mode</translation>
1737         </message>
1738         <message>
1739             <source>GEOM_SURFCONE</source>
1740             <translation>Conical Face</translation>
1741         </message>
1742         <message>
1743             <source>GEOM_SURFCYLINDER</source>
1744             <translation>Cylindrical Face</translation>
1745         </message>
1746         <message>
1747             <source>GEOM_SURFSPHERE</source>
1748             <translation>Spherical Face</translation>
1749         </message>
1750         <message>
1751             <source>GEOM_SURFTORUS</source>
1752             <translation>Toroidal Face</translation>
1753         </message>
1754         <message>
1755             <source>GEOM_SameParameter</source>
1756             <translation>SameParameter</translation>
1757         </message>
1758         <message>
1759             <source>GEOM_SplitAngle</source>
1760             <translation>SplitAngle</translation>
1761         </message>
1762         <message>
1763             <source>GEOM_SplitClosedFaces</source>
1764             <translation>SplitClosedFaces</translation>
1765         </message>
1766         <message>
1767             <source>GEOM_SplitContinuity</source>
1768             <translation>SplitContinuity</translation>
1769         </message>
1770         <message>
1771             <source>GEOM_TOLERANCE</source>
1772             <translation>Tolerance</translation>
1773         </message>
1774         <message>
1775             <source>GEOM_TOLERANCE_CONSTR</source>
1776             <translation>Object And Its Tolerances</translation>
1777         </message>
1778         <message>
1779             <source>GEOM_TOLERANCE_EDGE</source>
1780             <translation>Edge :</translation>
1781         </message>
1782         <message>
1783             <source>GEOM_TOLERANCE_FACE</source>
1784             <translation>Face :</translation>
1785         </message>
1786         <message>
1787             <source>GEOM_TOLERANCE_TITLE</source>
1788             <translation>Maximum Tolerance</translation>
1789         </message>
1790         <message>
1791             <source>GEOM_TOLERANCE_VERTEX</source>
1792             <translation>Vertex :</translation>
1793         </message>
1794         <message>
1795             <source>GEOM_TOOL_OBJECT</source>
1796             <translation>Tool Object</translation>
1797         </message>
1798         <message>
1799             <source>GEOM_TORUS</source>
1800             <translation>Torus</translation>
1801         </message>
1802         <message>
1803             <source>GEOM_TORUS_TITLE</source>
1804             <translation>Torus Construction</translation>
1805         </message>
1806         <message>
1807             <source>GEOM_TRANSLATION</source>
1808             <translation>Translation</translation>
1809         </message>
1810         <message>
1811             <source>GEOM_TRANSLATION_COOR</source>
1812             <translation>Translation With Coordinates</translation>
1813         </message>
1814         <message>
1815             <source>GEOM_TRANSLATION_TITLE</source>
1816             <translation>Translation Of An Object</translation>
1817         </message>
1818         <message>
1819             <source>GEOM_TRANSPARENCY_OPAQUE</source>
1820             <translation>Opaque</translation>
1821         </message>
1822         <message>
1823             <source>GEOM_TRANSPARENCY_TITLE</source>
1824             <translation>Transparency</translation>
1825         </message>
1826         <message>
1827             <source>GEOM_TRANSPARENCY_TRANSPARENT</source>
1828             <translation>Transparent</translation>
1829         </message>
1830         <message>
1831             <source>GEOM_TRIHEDRON</source>
1832             <translation>Trihedron</translation>
1833         </message>
1834         <message>
1835             <source>GEOM_ToBezier</source>
1836             <translation>ToBezier</translation>
1837         </message>
1838         <message>
1839             <source>GEOM_VALUE</source>
1840             <translation>Value</translation>
1841         </message>
1842         <message>
1843             <source>GEOM_VECTOR</source>
1844             <translation>Vector</translation>
1845         </message>
1846         <message>
1847             <source>GEOM_VECTOR_LENGTH</source>
1848             <translation>Vector Length :</translation>
1849         </message>
1850         <message>
1851             <source>GEOM_VECTOR_TITLE</source>
1852             <translation>Vector Construction</translation>
1853         </message>
1854         <message>
1855             <source>GEOM_VECTOR_U</source>
1856             <translation>Vector U</translation>
1857         </message>
1858         <message>
1859             <source>GEOM_VECTOR_V</source>
1860             <translation>Vector V</translation>
1861         </message>
1862         <message>
1863             <source>GEOM_VERTEX</source>
1864             <translation>Vertex</translation>
1865         </message>
1866         <message>
1867             <source>GEOM_VERTEXES</source>
1868             <translation>Vertexes</translation>
1869         </message>
1870         <message>
1871             <source>GEOM_WATER_DENSITY</source>
1872             <translation>Water Density :</translation>
1873         </message>
1874         <message>
1875             <source>GEOM_WEIGHT</source>
1876             <translation>Weight :</translation>
1877         </message>
1878         <message>
1879             <source>GEOM_WIDTH</source>
1880             <translation>Width :</translation>
1881         </message>
1882         <message>
1883             <source>GEOM_WHATIS</source>
1884             <translation>Whatis</translation>
1885         </message>
1886         <message>
1887             <source>GEOM_WHATIS_OBJECT</source>
1888             <translation>Object And Its Topological Informations</translation>
1889         </message>
1890         <message>
1891             <source>GEOM_WHATIS_TITLE</source>
1892             <translation>Whatis Informations</translation>
1893         </message>
1894         <message>
1895             <source>GEOM_WIRE</source>
1896             <translation>Wire</translation>
1897         </message>
1898         <message>
1899             <source>GEOM_WIRES</source>
1900             <translation>Wire(s)</translation>
1901         </message>
1902         <message>
1903             <source>GEOM_WIRES_TO_REMOVE</source>
1904             <translation>Wires to remove</translation>
1905         </message>
1906         <message>
1907             <source>GEOM_WIREZ</source>
1908             <translation>Wires</translation>
1909         </message>
1910         <message>
1911             <source>GEOM_WIRE_CONNECT</source>
1912             <translation>Wire creation from wires/edges connected</translation>
1913         </message>
1914         <message>
1915             <source>GEOM_WIRE_TITLE</source>
1916             <translation>Create A Wire</translation>
1917         </message>
1918         <message>
1919             <source>GEOM_WPLANE</source>
1920             <translation>Working Plane</translation>
1921         </message>
1922         <message>
1923             <source>GEOM_WPLANE_FACE</source>
1924             <translation>Plane, Planar Face or LCS</translation>
1925         </message>
1926         <message>
1927             <source>GEOM_WPLANE_ORIGIN</source>
1928             <translation>Select a plane</translation>
1929         </message>
1930         <message>
1931             <source>GEOM_WPLANE_OXY</source>
1932             <translation>OXY</translation>
1933         </message>
1934         <message>
1935             <source>GEOM_WPLANE_OYZ</source>
1936             <translation>OYZ</translation>
1937         </message>
1938         <message>
1939             <source>GEOM_WPLANE_OZX</source>
1940             <translation>OZX</translation>
1941         </message>
1942         <message>
1943             <source>GEOM_WPLANE_TITLE</source>
1944             <translation>Working Plane Selection</translation>
1945         </message>
1946         <message>
1947             <source>GEOM_WPLANE_VECTOR</source>
1948             <translation>Select 2 vectors</translation>
1949         </message>
1950         <message>
1951             <source>GEOM_WPLANE_VX</source>
1952             <translation>Vector X</translation>
1953         </message>
1954         <message>
1955             <source>GEOM_WPLANE_VZ</source>
1956             <translation>Vector Z</translation>
1957         </message>
1958         <message>
1959             <source>GEOM_WRN_RADIUS_NULL</source>
1960             <translation>Radius is null</translation>
1961         </message>
1962         <message>
1963             <source>GEOM_WRN_WARNING</source>
1964             <translation>Warning</translation>
1965         </message>
1966         <message>
1967             <source>WRN_SHAPE_UNCLOSED</source>
1968             <translation>Unable to create solid from unclosed shape %1</translation>
1969         </message>
1970         <message>
1971             <source>GEOM_X</source>
1972             <translation>X :</translation>
1973         </message>
1974         <message>
1975             <source>GEOM_Y</source>
1976             <translation>Y :</translation>
1977         </message>
1978         <message>
1979             <source>GEOM_Z</source>
1980             <translation>Z :</translation>
1981         </message>
1982         <message>
1983             <source>GLUE_NEW_OBJ_NAME</source>
1984             <translation>Glue</translation>
1985         </message>
1986         <message>
1987             <source>MEN_ALL_SEL_ONLY</source>
1988             <translation>Select All</translation>
1989         </message>
1990         <message>
1991             <source>MEN_ARC</source>
1992             <translation>Arc</translation>
1993         </message>
1994         <message>
1995             <source>MEN_ARCHIMEDE</source>
1996             <translation>Archimede</translation>
1997         </message>
1998         <message>
1999             <source>MEN_BASIC</source>
2000             <translation>Basic</translation>
2001         </message>
2002         <message>
2003             <source>MEN_BASIC_PROPS</source>
2004             <translation>Basic Properties</translation>
2005         </message>
2006         <message>
2007             <source>MEN_BLOCKS</source>
2008             <translation>Blocks</translation>
2009         </message>
2010         <message>
2011             <source>MEN_BND_BOX</source>
2012             <translation>Bounding Box</translation>
2013         </message>
2014         <message>
2015             <source>MEN_BOOLEAN</source>
2016             <translation>Boolean</translation>
2017         </message>
2018         <message>
2019             <source>MEN_BOX</source>
2020             <translation>Box</translation>
2021         </message>
2022         <message>
2023             <source>MEN_BUILD</source>
2024             <translation>Build</translation>
2025         </message>
2026         <message>
2027             <source>MEN_CHAMFER</source>
2028             <translation>Chamfer</translation>
2029         </message>
2030         <message>
2031             <source>MEN_CHANGE_ORIENTATION</source>
2032             <translation>Change Orientation</translation>
2033         </message>
2034         <message>
2035             <source>MEN_CHECK</source>
2036             <translation>Check</translation>
2037         </message>
2038         <message>
2039             <source>MEN_CHECK_COMPOUND</source>
2040             <translation>Check Compound of Blocks</translation>
2041         </message>
2042         <message>
2043             <source>MEN_CHECK_FREE_BNDS</source>
2044             <translation>Check Free Boundaries</translation>
2045         </message>
2046         <message>
2047             <source>MEN_CHECK_FREE_FACES</source>
2048             <translation>Check Free Faces</translation>
2049         </message>
2050         <message>
2051             <source>MEN_CHECK_GEOMETRY</source>
2052             <translation>Check Geometry</translation>
2053         </message>
2054         <message>
2055             <source>MEN_CIRCLE</source>
2056             <translation>Circle</translation>
2057         </message>
2058         <message>
2059             <source>MEN_CLIPPING</source>
2060             <translation>Clipping Range</translation>
2061         </message>
2062         <message>
2063             <source>MEN_CLOSE_CONTOUR</source>
2064             <translation>Close Contour</translation>
2065         </message>
2066         <message>
2067             <source>MEN_COMMON</source>
2068             <translation>Common</translation>
2069         </message>
2070         <message>
2071             <source>MEN_COMPOUND</source>
2072             <translation>Compound</translation>
2073         </message>
2074         <message>
2075             <source>MEN_COMPOUND_SEL_ONLY</source>
2076             <translation>Compound</translation>
2077         </message>
2078         <message>
2079             <source>MEN_CONE</source>
2080             <translation>Cone</translation>
2081         </message>
2082         <message>
2083             <source>MEN_CURVE</source>
2084             <translation>Curve</translation>
2085         </message>
2086         <message>
2087             <source>MEN_CUT</source>
2088             <translation>Cut</translation>
2089         </message>
2090         <message>
2091             <source>MEN_CYLINDER</source>
2092             <translation>Cylinder</translation>
2093         </message>
2094         <message>
2095             <source>MEN_DELETE</source>
2096             <translation>Delete</translation>
2097         </message>
2098         <message>
2099             <source>MEN_DIMENSIONS</source>
2100             <translation>Dimensions</translation>
2101         </message>
2102         <message>
2103             <source>MEN_DISPLAY</source>
2104             <translation>Show</translation>
2105         </message>
2106         <message>
2107             <source>MEN_DISK</source>
2108             <translation>Disk</translation>
2109         </message>
2110         <message>
2111             <source>MEN_DISPLAY_ALL</source>
2112             <translation>Show All</translation>
2113         </message>
2114         <message>
2115             <source>MEN_DISPLAY_MODE</source>
2116             <translation>Display Mode</translation>
2117         </message>
2118         <message>
2119             <source>MEN_DISPLAY_ONLY</source>
2120             <translation>Show Only</translation>
2121         </message>
2122         <message>
2123             <source>MEN_EDGE</source>
2124             <translation>Edge</translation>
2125         </message>
2126         <message>
2127             <source>MEN_EDGE_SEL_ONLY</source>
2128             <translation>Edge</translation>
2129         </message>
2130         <message>
2131             <source>MEN_EDIT</source>
2132             <translation>Edit</translation>
2133         </message>
2134         <message>
2135             <source>MEN_ELLIPSE</source>
2136             <translation>Ellipse</translation>
2137         </message>
2138         <message>
2139             <source>MEN_ERASE</source>
2140             <translation>Hide</translation>
2141         </message>
2142         <message>
2143             <source>MEN_ERASE_ALL</source>
2144             <translation>Hide All</translation>
2145         </message>
2146         <message>
2147             <source>MEN_EXPLODE</source>
2148             <translation>Explode</translation>
2149         </message>
2150         <message>
2151             <source>MEN_EXPLODE_BLOCKS</source>
2152             <translation>Explode on Blocks</translation>
2153         </message>
2154         <message>
2155             <source>MEN_EXPORT</source>
2156             <translation>Export...</translation>
2157         </message>
2158         <message>
2159             <source>MEN_EXTRUSION</source>
2160             <translation>Extrusion</translation>
2161         </message>
2162         <message>
2163             <source>MEN_FACE</source>
2164             <translation>Face</translation>
2165         </message>
2166         <message>
2167             <source>MEN_FACE_SEL_ONLY</source>
2168             <translation>Face</translation>
2169         </message>
2170         <message>
2171             <source>MEN_FILE</source>
2172             <translation>File</translation>
2173         </message>
2174         <message>
2175             <source>MEN_FILLET</source>
2176             <translation>Fillet</translation>
2177         </message>
2178         <message>
2179             <source>MEN_FILLET_2D</source>
2180             <translation>Fillet 2D</translation>
2181         </message>
2182         <message>
2183             <source>MEN_FILLING</source>
2184             <translation>Filling</translation>
2185         </message>
2186         <message>
2187             <source>MEN_FUSE</source>
2188             <translation>Fuse</translation>
2189         </message>
2190         <message>
2191             <source>MEN_GENERATION</source>
2192             <translation>Generation</translation>
2193         </message>
2194         <message>
2195             <source>MEN_GLUE_FACES</source>
2196             <translation>Glue Faces</translation>
2197         </message>
2198         <message>
2199             <source>MEN_GROUP</source>
2200             <translation>Group</translation>
2201         </message>
2202         <message>
2203             <source>MEN_GROUP_CREATE</source>
2204             <translation>Create</translation>
2205         </message>
2206         <message>
2207             <source>MEN_GROUP_EDIT</source>
2208             <translation>Edit</translation>
2209         </message>
2210         <message>
2211             <source>MEN_RELOAD_IMPORTED</source>
2212             <translation>Reload From Disk</translation>
2213         </message>
2214         <message>
2215             <source>MEN_HEX_SOLID</source>
2216             <translation>Hexahedral Solid</translation>
2217         </message>
2218         <message>
2219             <source>MEN_IMPORT</source>
2220             <translation>Import...</translation>
2221         </message>
2222         <message>
2223             <source>MEN_INERTIA</source>
2224             <translation>Inertia</translation>
2225         </message>
2226         <message>
2227             <source>MEN_ISOS</source>
2228             <translation>Isos</translation>
2229         </message>
2230         <message>
2231             <source>MEN_LINE</source>
2232             <translation>Line</translation>
2233         </message>
2234         <message>
2235             <source>MEN_LOCAL_CS</source>
2236             <translation>Local Coordinate System</translation>
2237         </message>
2238         <message>
2239             <source>MEN_MASS_CENTER</source>
2240             <translation>Center of Mass</translation>
2241         </message>
2242         <message>
2243             <source>MEN_MEASURES</source>
2244             <translation>Measures</translation>
2245         </message>
2246         <message>
2247             <source>MEN_MIN_DIST</source>
2248             <translation>Min Distance</translation>
2249         </message>
2250         <message>
2251             <source>MEN_MIRROR</source>
2252             <translation>Mirror Image</translation>
2253         </message>
2254         <message>
2255             <source>MEN_MODIFY_LOCATION</source>
2256             <translation>Modify the Location</translation>
2257         </message>
2258         <message>
2259             <source>MEN_MUL_ROTATION</source>
2260             <translation>Multi-Rotation</translation>
2261         </message>
2262         <message>
2263             <source>MEN_MUL_TRANSFORM</source>
2264             <translation>Multi-Transformation</translation>
2265         </message>
2266         <message>
2267             <source>MEN_MUL_TRANSLATION</source>
2268             <translation>Multi-Translation</translation>
2269         </message>
2270         <message>
2271             <source>MEN_NEW_ENTITY</source>
2272             <translation>New Entity</translation>
2273         </message>
2274         <message>
2275             <source>MEN_OFFSET</source>
2276             <translation>Offset Surface</translation>
2277         </message>
2278         <message>
2279             <source>MEN_OPERATIONS</source>
2280             <translation>Operations</translation>
2281         </message>
2282         <message>
2283             <source>MEN_PARTITION</source>
2284             <translation>Partition</translation>
2285         </message>
2286         <message>
2287             <source>MEN_PIPE</source>
2288             <translation>Extrusion Along a Path</translation>
2289         </message>
2290         <message>
2291             <source>MEN_PLANE</source>
2292             <translation>Plane</translation>
2293         </message>
2294         <message>
2295             <source>MEN_POINT</source>
2296             <translation>Point</translation>
2297         </message>
2298         <message>
2299             <source>MEN_POINT_COORDS</source>
2300             <translation>Point Coordinates</translation>
2301         </message>
2302         <message>
2303             <source>MEN_POINT_ON_EDGE</source>
2304             <translation>Add Point on Edge</translation>
2305         </message>
2306         <message>
2307             <source>MEN_POP_COLOR</source>
2308             <translation>Color</translation>
2309         </message>
2310         <message>
2311             <source>MEN_POP_CREATE_GROUP</source>
2312             <translation>Create Group</translation>
2313         </message>
2314         <message>
2315             <source>MEN_POP_ISOS</source>
2316             <translation>Isos</translation>
2317         </message>
2318         <message>
2319             <source>MEN_POP_RENAME</source>
2320             <translation>Rename</translation>
2321         </message>
2322         <message>
2323             <source>MEN_POP_SHADING</source>
2324             <translation>Shading</translation>
2325         </message>
2326         <message>
2327             <source>MEN_POP_TRANSPARENCY</source>
2328             <translation>Transparency</translation>
2329         </message>
2330         <message>
2331             <source>MEN_POP_WIREFRAME</source>
2332             <translation>Wireframe</translation>
2333         </message>
2334         <message>
2335             <source>MEN_PREFERENCES</source>
2336             <translation>Preferences</translation>
2337         </message>
2338         <message>
2339             <source>MEN_PREFERENCES_GEOM</source>
2340             <translation>Geometry</translation>
2341         </message>
2342         <message>
2343             <source>MEN_PRIMITIVES</source>
2344             <translation>Primitives</translation>
2345         </message>
2346         <message>
2347             <source>MEN_PROPAGATE</source>
2348             <translation>Propagate</translation>
2349         </message>
2350         <message>
2351             <source>MEN_Q_FACE</source>
2352             <translation>Quadrangle Face</translation>
2353         </message>
2354         <message>
2355             <source>MEN_REPAIR</source>
2356             <translation>Repair</translation>
2357         </message>
2358         <message>
2359             <source>MEN_REVOLUTION</source>
2360             <translation>Revolution</translation>
2361         </message>
2362         <message>
2363             <source>MEN_ROTATION</source>
2364             <translation>Rotation</translation>
2365         </message>
2366         <message>
2367             <source>MEN_SCALE</source>
2368             <translation>Scale Transform</translation>
2369         </message>
2370         <message>
2371             <source>MEN_SECTION</source>
2372             <translation>Section</translation>
2373         </message>
2374         <message>
2375             <source>MEN_SELECT_ONLY</source>
2376             <translation>Select Only</translation>
2377         </message>
2378         <message>
2379             <source>MEN_SEWING</source>
2380             <translation>Sewing</translation>
2381         </message>
2382         <message>
2383             <source>MEN_SHADING</source>
2384             <translation>Shading</translation>
2385         </message>
2386         <message>
2387             <source>MEN_SHADING_COLOR</source>
2388             <translation>Shading Color</translation>
2389         </message>
2390         <message>
2391             <source>MEN_SHAPE_PROCESS</source>
2392             <translation>Shape Processing</translation>
2393         </message>
2394         <message>
2395             <source>MEN_SHELL</source>
2396             <translation>Shell</translation>
2397         </message>
2398         <message>
2399             <source>MEN_SHELL_SEL_ONLY</source>
2400             <translation>Shell</translation>
2401         </message>
2402         <message>
2403             <source>MEN_SKETCH</source>
2404             <translation>Sketch</translation>
2405         </message>
2406         <message>
2407             <source>MEN_3DSKETCH</source>
2408             <translation>3D Sketch</translation>
2409         </message>
2410         <message>
2411             <source>MEN_SOLID</source>
2412             <translation>Solid</translation>
2413         </message>
2414         <message>
2415             <source>MEN_SOLID_SEL_ONLY</source>
2416             <translation>Solid</translation>
2417         </message>
2418         <message>
2419             <source>MEN_SPHERE</source>
2420             <translation>Sphere</translation>
2421         </message>
2422         <message>
2423             <source>MEN_STEP_VALUE</source>
2424             <translation>Step Value</translation>
2425         </message>
2426         <message>
2427             <source>MEN_SUPPERSS_HOLES</source>
2428             <translation>Suppress Holes</translation>
2429         </message>
2430         <message>
2431             <source>MEN_SUPPRESS_FACES</source>
2432             <translation>Suppress Faces</translation>
2433         </message>
2434         <message>
2435             <source>MEN_SUPPRESS_INT_WIRES</source>
2436             <translation>Suppress Internal Wires</translation>
2437         </message>
2438         <message>
2439             <source>MEN_TOLERANCE</source>
2440             <translation>Compute Tolerance</translation>
2441         </message>
2442         <message>
2443             <source>MEN_TOOLS</source>
2444             <translation>Tools</translation>
2445         </message>
2446         <message>
2447             <source>MEN_TORUS</source>
2448             <translation>Torus</translation>
2449         </message>
2450         <message>
2451             <source>MEN_TRANSFORMATION</source>
2452             <translation>Transformation</translation>
2453         </message>
2454         <message>
2455             <source>MEN_TRANSLATION</source>
2456             <translation>Translation</translation>
2457         </message>
2458         <message>
2459             <source>MEN_VECTOR</source>
2460             <translation>Vector</translation>
2461         </message>
2462         <message>
2463             <source>MEN_VERTEX_SEL_ONLY</source>
2464             <translation>Vertex</translation>
2465         </message>
2466         <message>
2467             <source>MEN_VIEW</source>
2468             <translation>View</translation>
2469         </message>
2470         <message>
2471             <source>MEN_WHAT_IS</source>
2472             <translation>What is</translation>
2473         </message>
2474         <message>
2475             <source>MEN_WIRE</source>
2476             <translation>Wire</translation>
2477         </message>
2478         <message>
2479             <source>MEN_WIREFRAME</source>
2480             <translation>Wireframe</translation>
2481         </message>
2482         <message>
2483             <source>MEN_WIRE_SEL_ONLY</source>
2484             <translation>Wire</translation>
2485         </message>
2486         <message>
2487             <source>MEN_WORK_PLANE</source>
2488             <translation>Working Plane</translation>
2489         </message>
2490         <message>
2491             <source>NAME_LBL</source>
2492             <translation>Name: </translation>
2493         </message>
2494         <message>
2495             <source>NON_GEOM_OBJECTS_SELECTED</source>
2496             <translation>There are objects selected which do not belong to %1 component.</translation>
2497         </message>
2498         <message>
2499             <source>PREF_DISPLAY_MODE</source>
2500             <translation>Default display mode</translation>
2501         </message>
2502         <message>
2503             <source>PREF_FREE_BOUND_COLOR</source>
2504             <translation>Color of free boundaries</translation>
2505         </message>
2506         <message>
2507             <source>PREF_GROUP_GENERAL</source>
2508             <translation>General</translation>
2509         </message>
2510         <message>
2511             <source>PREF_GROUP_OCCVIEWER</source>
2512             <translation>OCC Viewer 3d</translation>
2513         </message>
2514         <message>
2515             <source>PREF_GROUP_VERTEX</source>
2516             <translation>Marker of Points</translation>
2517         </message>
2518         <message>
2519             <source>PREF_ISOS_COLOR</source>
2520             <translation>Color of isolines</translation>
2521         </message>
2522         <message>
2523             <source>PREF_LINE_COLOR</source>
2524             <translation>Color of edges, vectors, wires</translation>
2525         </message>
2526         <message>
2527             <source>PREF_MARKER_SCALE</source>
2528             <translation>Size</translation>
2529         </message>
2530         <message>
2531             <source>PREF_POINT_COLOR</source>
2532             <translation>Color of points</translation>
2533         </message>
2534         <message>
2535             <source>PREF_SHADING_COLOR</source>
2536             <translation>Default shading color</translation>
2537         </message>
2538         <message>
2539             <source>PREF_STEP_VALUE</source>
2540             <translation>Step value for spin boxes</translation>
2541         </message>
2542         <message>
2543             <source>PREF_TAB_SETTINGS</source>
2544             <translation>Settings</translation>
2545         </message>
2546         <message>
2547             <source>PREF_TYPE_OF_MARKER</source>
2548             <translation>Type</translation>
2549         </message>
2550         <message>
2551             <source>PREF_WIREFRAME_COLOR</source>
2552             <translation>Default wireframe color</translation>
2553         </message>
2554         <message>
2555             <source>PROCESS_SHAPE_NEW_OBJ_NAME</source>
2556             <translation>ProcessShape</translation>
2557         </message>
2558         <message>
2559             <source>REMOVE_HOLES_NEW_OBJ_NAME</source>
2560             <translation>SupressHoles</translation>
2561         </message>
2562         <message>
2563             <source>REMOVE_INT_WIRES_NEW_OBJ_NAME</source>
2564             <translation>RemoveIntWires</translation>
2565         </message>
2566         <message>
2567             <source>SEWING_NEW_OBJ_NAME</source>
2568             <translation>Sewing</translation>
2569         </message>
2570         <message>
2571             <source>STB_ALL_SEL_ONLY</source>
2572             <translation>Select all Objects</translation>
2573         </message>
2574         <message>
2575             <source>STB_ARC</source>
2576             <translation>Create an arc</translation>
2577         </message>
2578         <message>
2579             <source>STB_ARCHIMEDE</source>
2580             <translation>Archimede</translation>
2581         </message>
2582         <message>
2583             <source>STB_BASIC_PROPS</source>
2584             <translation>Basic properties</translation>
2585         </message>
2586         <message>
2587             <source>STB_BND_BOX</source>
2588             <translation>Compute bounding box</translation>
2589         </message>
2590         <message>
2591             <source>STB_BOX</source>
2592             <translation>Create a box</translation>
2593         </message>
2594         <message>
2595             <source>STB_CHAMFER</source>
2596             <translation>Chamfer</translation>
2597         </message>
2598         <message>
2599             <source>STB_CHANGE_ORIENTATION</source>
2600             <translation>Change orientation</translation>
2601         </message>
2602         <message>
2603             <source>STB_CHECK</source>
2604             <translation>Check</translation>
2605         </message>
2606         <message>
2607             <source>STB_CHECK_COMPOUND</source>
2608             <translation>Check compound of blocks</translation>
2609         </message>
2610         <message>
2611             <source>STB_CHECK_FREE_BNDS</source>
2612             <translation>Check free boundaries</translation>
2613         </message>
2614         <message>
2615             <source>STB_CHECK_FREE_FACES</source>
2616             <translation>Check free faces</translation>
2617         </message>
2618         <message>
2619             <source>STB_CHECK_GEOMETRY</source>
2620             <translation>Check Geometry</translation>
2621         </message>
2622         <message>
2623             <source>STB_CIRCLE</source>
2624             <translation>Create a circle</translation>
2625         </message>
2626         <message>
2627             <source>STB_CLIPPING</source>
2628             <translation>Clipping range</translation>
2629         </message>
2630         <message>
2631             <source>STB_CLOSE_CONTOUR</source>
2632             <translation>Perform close contour</translation>
2633         </message>
2634         <message>
2635             <source>STB_COMMON</source>
2636             <translation>Common</translation>
2637         </message>
2638         <message>
2639             <source>STB_COMPOUND</source>
2640             <translation>Build a compound</translation>
2641         </message>
2642         <message>
2643             <source>STB_COMPOUND_SEL_ONLY</source>
2644             <translation>Select only a Compounds</translation>
2645         </message>
2646         <message>
2647             <source>STB_CONE</source>
2648             <translation>Create a cone</translation>
2649         </message>
2650         <message>
2651             <source>STB_CURVE</source>
2652             <translation>Create a curve</translation>
2653         </message>
2654         <message>
2655             <source>STB_CUT</source>
2656             <translation>Cut</translation>
2657         </message>
2658         <message>
2659             <source>STB_CYLINDER</source>
2660             <translation>Create a cylinder</translation>
2661         </message>
2662         <message>
2663             <source>STB_DELETE</source>
2664             <translation>Delete object</translation>
2665         </message>
2666         <message>
2667             <source>STB_DISK</source>
2668             <translation>Create a disk</translation>
2669         </message>
2670         <message>
2671             <source>STB_DISPLAY</source>
2672             <translation>Show object(s)</translation>
2673         </message>
2674         <message>
2675             <source>STB_DISPLAY_ALL</source>
2676             <translation>Show all</translation>
2677         </message>
2678         <message>
2679             <source>STB_DISPLAY_ONLY</source>
2680             <translation>Show only</translation>
2681         </message>
2682         <message>
2683             <source>STB_EDGE</source>
2684             <translation>Build an edge</translation>
2685         </message>
2686         <message>
2687             <source>STB_EDGE_SEL_ONLY</source>
2688             <translation>Select only a Edges</translation>
2689         </message>
2690         <message>
2691             <source>STB_ELLIPSE</source>
2692             <translation>Create an ellipse</translation>
2693         </message>
2694         <message>
2695             <source>STB_ERASE</source>
2696             <translation>Hide object(s)</translation>
2697         </message>
2698         <message>
2699             <source>STB_ERASE_ALL</source>
2700             <translation>Hide all</translation>
2701         </message>
2702         <message>
2703             <source>STB_EXPLODE</source>
2704             <translation>Explode</translation>
2705         </message>
2706         <message>
2707             <source>STB_EXPLODE_BLOCKS</source>
2708             <translation>Explode on Blocks</translation>
2709         </message>
2710         <message>
2711             <source>STB_EXPORT</source>
2712             <translation>Export geometry to BREP file</translation>
2713         </message>
2714         <message>
2715             <source>STB_EXTRUSION</source>
2716             <translation>Create an extrusion</translation>
2717         </message>
2718         <message>
2719             <source>STB_FACE</source>
2720             <translation>Build a face</translation>
2721         </message>
2722         <message>
2723             <source>STB_FACE_SEL_ONLY</source>
2724             <translation>Select only a Faces</translation>
2725         </message>
2726         <message>
2727             <source>STB_FILLET</source>
2728             <translation>Fillet</translation>
2729         </message>
2730         <message>
2731             <source>STB_FILLING</source>
2732             <translation>Create a filling</translation>
2733         </message>
2734         <message>
2735             <source>STB_FUSE</source>
2736             <translation>Fuse</translation>
2737         </message>
2738         <message>
2739             <source>STB_GLUE_FACES</source>
2740             <translation>Perform glue faces</translation>
2741         </message>
2742         <message>
2743             <source>STB_GROUP_CREATE</source>
2744             <translation>Create a group</translation>
2745         </message>
2746         <message>
2747             <source>STB_GROUP_EDIT</source>
2748             <translation>Edit a group</translation>
2749         </message>
2750         <message>
2751             <source>STB_RELOAD_IMPORTED</source>
2752             <translation>Reload imported shape from its original place on disk</translation>
2753         </message>
2754         <message>
2755             <source>STB_HEX_SOLID</source>
2756             <translation>Hexahedral Solid</translation>
2757         </message>
2758         <message>
2759             <source>STB_IMPORT</source>
2760             <translation>Import geometry from BREP file</translation>
2761         </message>
2762         <message>
2763             <source>STB_INERTIA</source>
2764             <translation>Compute intertia</translation>
2765         </message>
2766         <message>
2767             <source>STB_ISOS</source>
2768             <translation>Set number of isolines</translation>
2769         </message>
2770         <message>
2771             <source>STB_LINE</source>
2772             <translation>Create a line</translation>
2773         </message>
2774         <message>
2775             <source>STB_LOCAL_CS</source>
2776             <translation>Create a local coordinate system</translation>
2777         </message>
2778         <message>
2779             <source>STB_MASS_CENTER</source>
2780             <translation>Compute center of mass</translation>
2781         </message>
2782         <message>
2783             <source>STB_MIN_DIST</source>
2784             <translation>Compute minimum distance</translation>
2785         </message>
2786         <message>
2787             <source>STB_MIRROR</source>
2788             <translation>Mirror image</translation>
2789         </message>
2790         <message>
2791             <source>STB_MODIFY_LOCATION</source>
2792             <translation>Modify the Location</translation>
2793         </message>
2794         <message>
2795             <source>STB_MUL_ROTATION</source>
2796             <translation>Multi-Rotation</translation>
2797         </message>
2798         <message>
2799             <source>STB_MUL_TRANSFORM</source>
2800             <translation>Multi-transformation</translation>
2801         </message>
2802         <message>
2803             <source>STB_MUL_TRANSLATION</source>
2804             <translation>Multi-Translation</translation>
2805         </message>
2806         <message>
2807             <source>STB_OFFSET</source>
2808             <translation>Offset surface</translation>
2809         </message>
2810         <message>
2811             <source>STB_PARTITION</source>
2812             <translation>Partition</translation>
2813         </message>
2814         <message>
2815             <source>STB_PIPE</source>
2816             <translation>Create a shape by Extrusion along a path</translation>
2817         </message>
2818         <message>
2819             <source>STB_PLANE</source>
2820             <translation>Create a plane</translation>
2821         </message>
2822         <message>
2823             <source>STB_POINT</source>
2824             <translation>Create a point</translation>
2825         </message>
2826         <message>
2827             <source>STB_POINT_COORDS</source>
2828             <translation>Point coordinates</translation>
2829         </message>
2830         <message>
2831             <source>STB_POINT_ON_EDGE</source>
2832             <translation>Add point on edge</translation>
2833         </message>
2834         <message>
2835             <source>STB_POP_COLOR</source>
2836             <translation>Color</translation>
2837         </message>
2838         <message>
2839             <source>STB_POP_CREATE_GROUP</source>
2840             <translation>Create Group</translation>
2841         </message>
2842         <message>
2843             <source>STB_POP_ISOS</source>
2844             <translation>Isolines</translation>
2845         </message>
2846         <message>
2847             <source>STB_POP_RENAME</source>
2848             <translation>Rename</translation>
2849         </message>
2850         <message>
2851             <source>STB_POP_SHADING</source>
2852             <translation>Shading</translation>
2853         </message>
2854         <message>
2855             <source>STB_POP_TRANSPARENCY</source>
2856             <translation>Transparency</translation>
2857         </message>
2858         <message>
2859             <source>STB_POP_WIREFRAME</source>
2860             <translation>Wireframe</translation>
2861         </message>
2862         <message>
2863             <source>STB_PROPAGATE</source>
2864             <translation>Propagate</translation>
2865         </message>
2866         <message>
2867             <source>STB_Q_FACE</source>
2868             <translation>Quadrangle Face</translation>
2869         </message>
2870         <message>
2871             <source>STB_REVOLUTION</source>
2872             <translation>Create a revolution</translation>
2873         </message>
2874         <message>
2875             <source>STB_ROTATION</source>
2876             <translation>Rotation</translation>
2877         </message>
2878         <message>
2879             <source>STB_SCALE</source>
2880             <translation>Scale transform</translation>
2881         </message>
2882         <message>
2883             <source>STB_SECTION</source>
2884             <translation>Section</translation>
2885         </message>
2886         <message>
2887             <source>STB_SEWING</source>
2888             <translation>Perform sewing</translation>
2889         </message>
2890         <message>
2891             <source>STB_SHADING</source>
2892             <translation>Shading</translation>
2893         </message>
2894         <message>
2895             <source>STB_SHADING_COLOR</source>
2896             <translation>Set shading color</translation>
2897         </message>
2898         <message>
2899             <source>STB_SHAPE_PROCESS</source>
2900             <translation>Perform shape processing </translation>
2901         </message>
2902         <message>
2903             <source>STB_SHELL</source>
2904             <translation>Build a shell</translation>
2905         </message>
2906         <message>
2907             <source>STB_SHELL_SEL_ONLY</source>
2908             <translation>Select only a Shells</translation>
2909         </message>
2910         <message>
2911             <source>STB_SKETCH</source>
2912             <translation>Sketch</translation>
2913         </message>
2914         <message>
2915             <source>STB_SOLID</source>
2916             <translation>Build a solid</translation>
2917         </message>
2918         <message>
2919             <source>STB_SOLID_SEL_ONLY</source>
2920             <translation>Select only a Solids</translation>
2921         </message>
2922         <message>
2923             <source>STB_SPHERE</source>
2924             <translation>Create a sphere</translation>
2925         </message>
2926         <message>
2927             <source>STB_STEP_VALUE</source>
2928             <translation>Set step value</translation>
2929         </message>
2930         <message>
2931             <source>STB_SUPPERSS_HOLES</source>
2932             <translation>Perform suppress holes</translation>
2933         </message>
2934         <message>
2935             <source>STB_SUPPRESS_FACES</source>
2936             <translation>Perform suppress faces</translation>
2937         </message>
2938         <message>
2939             <source>STB_SUPPRESS_INT_WIRES</source>
2940             <translation>Perform suppress internal wires</translation>
2941         </message>
2942         <message>
2943             <source>STB_TOLERANCE</source>
2944             <translation>Compute tolerance</translation>
2945         </message>
2946         <message>
2947             <source>STB_TORUS</source>
2948             <translation>Create a torus</translation>
2949         </message>
2950         <message>
2951             <source>STB_TRANSLATION</source>
2952             <translation>Translation</translation>
2953         </message>
2954         <message>
2955             <source>STB_VECTOR</source>
2956             <translation>Create a vector</translation>
2957         </message>
2958         <message>
2959             <source>STB_VERTEX_SEL_ONLY</source>
2960             <translation>Select only a Points</translation>
2961         </message>
2962         <message>
2963             <source>STB_WHAT_IS</source>
2964             <translation>What is</translation>
2965         </message>
2966         <message>
2967             <source>STB_WIRE</source>
2968             <translation>Build a wire</translation>
2969         </message>
2970         <message>
2971             <source>STB_WIRE_SEL_ONLY</source>
2972             <translation>Select only a Wires</translation>
2973         </message>
2974         <message>
2975             <source>STB_WORK_PLANE</source>
2976             <translation>Create a working plane</translation>
2977         </message>
2978         <message>
2979             <source>SUPPRESS_RESULT</source>
2980             <translation>Suppress Result</translation>
2981         </message>
2982         <message>
2983             <source>SUPRESS_FACE_NEW_OBJ_NAME</source>
2984             <translation>SupressFaces</translation>
2985         </message>
2986         <message>
2987             <source>ShHealOper_ErrorExecution_msg</source>
2988             <translation>Shape Healing algorithm failed</translation>
2989         </message>
2990         <message>
2991             <source>ShHealOper_InvalidParameters_msg</source>
2992             <translation>Incorrect parameters for Shape Healing algorithm</translation>
2993         </message>
2994         <message>
2995             <source>ShHealOper_NotError_msg</source>
2996             <translation>Shape Healing algorithm has done no modification of the original shape</translation>
2997         </message>
2998         <message>
2999             <source>TLT_RENAME</source>
3000             <translation>Rename</translation>
3001         </message>
3002         <message>
3003             <source>TOM_O</source>
3004             <translation>O</translation>
3005         </message>
3006         <message>
3007             <source>TOM_O_PLUS</source>
3008             <translation>+ in O</translation>
3009         </message>
3010         <message>
3011             <source>TOM_O_POINT</source>
3012             <translation>. in O</translation>
3013         </message>
3014         <message>
3015             <source>TOM_O_STAR</source>
3016             <translation>* in O</translation>
3017         </message>
3018         <message>
3019             <source>TOM_O_X</source>
3020             <translation>X in O</translation>
3021         </message>
3022         <message>
3023             <source>TOM_PLUS</source>
3024             <translation>+</translation>
3025         </message>
3026         <message>
3027             <source>TOM_POINT</source>
3028             <translation>.</translation>
3029         </message>
3030         <message>
3031             <source>TOM_STAR</source>
3032             <translation>*</translation>
3033         </message>
3034         <message>
3035             <source>TOM_X</source>
3036             <translation>X</translation>
3037         </message>
3038         <message>
3039             <source>TOOL_BASIC</source>
3040             <translation>Basic</translation>
3041         </message>
3042         <message>
3043             <source>TOOL_BOOLEAN</source>
3044             <translation>Boolean operations</translation>
3045         </message>
3046         <message>
3047             <source>TOOL_GENERATION</source>
3048             <translation>Generation</translation>
3049         </message>
3050         <message>
3051             <source>TOOL_PRIMITIVES</source>
3052             <translation>Primitives</translation>
3053         </message>
3054         <message>
3055             <source>TOOL_TRANSFORMATION</source>
3056             <translation>Transformation</translation>
3057         </message>
3058         <message>
3059             <source>TOP_ARC</source>
3060             <translation>Create an arc</translation>
3061         </message>
3062         <message>
3063             <source>TOP_ARCHIMEDE</source>
3064             <translation>Archimede</translation>
3065         </message>
3066         <message>
3067             <source>TOP_BASIC_PROPS</source>
3068             <translation>Basic properties</translation>
3069         </message>
3070         <message>
3071             <source>TOP_BND_BOX</source>
3072             <translation>Compute bounding box</translation>
3073         </message>
3074         <message>
3075             <source>TOP_BOX</source>
3076             <translation>Create a box</translation>
3077         </message>
3078         <message>
3079             <source>TOP_CHAMFER</source>
3080             <translation>Chamfer</translation>
3081         </message>
3082         <message>
3083             <source>TOP_CHANGE_ORIENTATION</source>
3084             <translation>Change orientation</translation>
3085         </message>
3086         <message>
3087             <source>TOP_CHECK</source>
3088             <translation>Check</translation>
3089         </message>
3090         <message>
3091             <source>TOP_CHECK_COMPOUND</source>
3092             <translation>Check compound of blocks</translation>
3093         </message>
3094         <message>
3095             <source>TOP_CHECK_FREE_BNDS</source>
3096             <translation>Check free boundaries</translation>
3097         </message>
3098         <message>
3099             <source>TOP_CHECK_FREE_FACES</source>
3100             <translation>Check free faces</translation>
3101         </message>
3102         <message>
3103             <source>TOP_CHECK_GEOMETRY</source>
3104             <translation>Check Geometry</translation>
3105         </message>
3106         <message>
3107             <source>TOP_CIRCLE</source>
3108             <translation>Create a circle</translation>
3109         </message>
3110         <message>
3111             <source>TOP_CLIPPING</source>
3112             <translation>Clipping range</translation>
3113         </message>
3114         <message>
3115             <source>TOP_CLOSE_CONTOUR</source>
3116             <translation>Perform close contour</translation>
3117         </message>
3118         <message>
3119             <source>TOP_COMMON</source>
3120             <translation>Common</translation>
3121         </message>
3122         <message>
3123             <source>TOP_COMPOUND</source>
3124             <translation>Build a compound</translation>
3125         </message>
3126         <message>
3127             <source>TOP_CONE</source>
3128             <translation>Create a cone</translation>
3129         </message>
3130         <message>
3131             <source>TOP_CURVE</source>
3132             <translation>Create a curve</translation>
3133         </message>
3134         <message>
3135             <source>TOP_CUT</source>
3136             <translation>Cut</translation>
3137         </message>
3138         <message>
3139             <source>TOP_CYLINDER</source>
3140             <translation>Create a cylinder</translation>
3141         </message>
3142         <message>
3143             <source>TOP_DELETE</source>
3144             <translation>Delete object</translation>
3145         </message>
3146         <message>
3147             <source>TOP_DISK</source>
3148             <translation>Build a Disk</translation>
3149         </message>
3150         <message>
3151             <source>TOP_DISPLAY</source>
3152             <translation>Show</translation>
3153         </message>
3154         <message>
3155             <source>TOP_DISPLAY_ALL</source>
3156             <translation>Show all</translation>
3157         </message>
3158         <message>
3159             <source>TOP_DISPLAY_ONLY</source>
3160             <translation>Show only</translation>
3161         </message>
3162         <message>
3163             <source>TOP_EDGE</source>
3164             <translation>Build an edge</translation>
3165         </message>
3166         <message>
3167             <source>TOP_ELLIPSE</source>
3168             <translation>Create an ellipse</translation>
3169         </message>
3170         <message>
3171             <source>TOP_ERASE</source>
3172             <translation>Hide</translation>
3173         </message>
3174         <message>
3175             <source>TOP_ERASE_ALL</source>
3176             <translation>Hide all</translation>
3177         </message>
3178         <message>
3179             <source>TOP_EXPLODE</source>
3180             <translation>Explode</translation>
3181         </message>
3182         <message>
3183             <source>TOP_EXPLODE_BLOCKS</source>
3184             <translation>Explode on Blocks</translation>
3185         </message>
3186         <message>
3187             <source>TOP_EXPORT</source>
3188             <translation>Export geometry to BREP file</translation>
3189         </message>
3190         <message>
3191             <source>TOP_EXTRUSION</source>
3192             <translation>Create an extrusion</translation>
3193         </message>
3194         <message>
3195             <source>TOP_FACE</source>
3196             <translation>Build a face</translation>
3197         </message>
3198         <message>
3199             <source>TOP_FILLET</source>
3200             <translation>Fillet</translation>
3201         </message>
3202         <message>
3203             <source>TOP_FILLING</source>
3204             <translation>Create a filling</translation>
3205         </message>
3206         <message>
3207             <source>TOP_FUSE</source>
3208             <translation>Fuse</translation>
3209         </message>
3210         <message>
3211             <source>TOP_GLUE_FACES</source>
3212             <translation>Perform glue faces</translation>
3213         </message>
3214         <message>
3215             <source>TOP_GROUP_CREATE</source>
3216             <translation>Create a group</translation>
3217         </message>
3218         <message>
3219             <source>TOP_GROUP_EDIT</source>
3220             <translation>Edit a group</translation>
3221         </message>
3222         <message>
3223             <source>TOP_HEX_SOLID</source>
3224             <translation>Hexahedral Solid</translation>
3225         </message>
3226         <message>
3227             <source>TOP_IMPORT</source>
3228             <translation>Import geometry from BREP file</translation>
3229         </message>
3230         <message>
3231             <source>TOP_INERTIA</source>
3232             <translation>Compute intertia</translation>
3233         </message>
3234         <message>
3235             <source>TOP_ISOS</source>
3236             <translation>Set number of isolines</translation>
3237         </message>
3238         <message>
3239             <source>TOP_LINE</source>
3240             <translation>Create a line</translation>
3241         </message>
3242         <message>
3243             <source>TOP_LOCAL_CS</source>
3244             <translation>Create a local coordinate system</translation>
3245         </message>
3246         <message>
3247             <source>TOP_MASS_CENTER</source>
3248             <translation>Compute center of mass</translation>
3249         </message>
3250         <message>
3251             <source>TOP_MIN_DIST</source>
3252             <translation>Compute minimum distance</translation>
3253         </message>
3254         <message>
3255             <source>TOP_MIRROR</source>
3256             <translation>Mirror image</translation>
3257         </message>
3258         <message>
3259             <source>TOP_MODIFY_LOCATION</source>
3260             <translation>Modify the Location</translation>
3261         </message>
3262         <message>
3263             <source>TOP_MUL_ROTATION</source>
3264             <translation>Multi-Rotation</translation>
3265         </message>
3266         <message>
3267             <source>TOP_MUL_TRANSFORM</source>
3268             <translation>Multi-transformation</translation>
3269         </message>
3270         <message>
3271             <source>TOP_MUL_TRANSLATION</source>
3272             <translation>Multi-Translation</translation>
3273         </message>
3274         <message>
3275             <source>TOP_OFFSET</source>
3276             <translation>Offset surface</translation>
3277         </message>
3278         <message>
3279             <source>TOP_PARTITION</source>
3280             <translation>Partition</translation>
3281         </message>
3282         <message>
3283             <source>TOP_PIPE</source>
3284             <translation>Extrusion along a path</translation>
3285         </message>
3286         <message>
3287             <source>TOP_PLANE</source>
3288             <translation>Create a plane</translation>
3289         </message>
3290         <message>
3291             <source>TOP_POINT</source>
3292             <translation>Create a point</translation>
3293         </message>
3294         <message>
3295             <source>TOP_POINT_COORDS</source>
3296             <translation>Point coordinates</translation>
3297         </message>
3298         <message>
3299             <source>TOP_POINT_ON_EDGE</source>
3300             <translation>Add point on edge</translation>
3301         </message>
3302         <message>
3303             <source>TOP_POP_COLOR</source>
3304             <translation>Color</translation>
3305         </message>
3306         <message>
3307             <source>TOP_POP_CREATE_GROUP</source>
3308             <translation>Create Group</translation>
3309         </message>
3310         <message>
3311             <source>TOP_POP_ISOS</source>
3312             <translation>Isolines</translation>
3313         </message>
3314         <message>
3315             <source>TOP_POP_RENAME</source>
3316             <translation>Rename</translation>
3317         </message>
3318         <message>
3319             <source>TOP_POP_SHADING</source>
3320             <translation>Shading</translation>
3321         </message>
3322         <message>
3323             <source>TOP_POP_TRANSPARENCY</source>
3324             <translation>Transparency</translation>
3325         </message>
3326         <message>
3327             <source>TOP_POP_WIREFRAME</source>
3328             <translation>Wireframe</translation>
3329         </message>
3330         <message>
3331             <source>TOP_PROPAGATE</source>
3332             <translation>Propagate</translation>
3333         </message>
3334         <message>
3335             <source>TOP_Q_FACE</source>
3336             <translation>Quadrangle Face</translation>
3337         </message>
3338         <message>
3339             <source>TOP_REVOLUTION</source>
3340             <translation>Create a revolution</translation>
3341         </message>
3342         <message>
3343             <source>TOP_ROTATION</source>
3344             <translation>Rotation</translation>
3345         </message>
3346         <message>
3347             <source>TOP_SCALE</source>
3348             <translation>Scale transform</translation>
3349         </message>
3350         <message>
3351             <source>TOP_SECTION</source>
3352             <translation>Section</translation>
3353         </message>
3354         <message>
3355             <source>TOP_SEWING</source>
3356             <translation>Perform sewing</translation>
3357         </message>
3358         <message>
3359             <source>TOP_SHADING</source>
3360             <translation>Shading</translation>
3361         </message>
3362         <message>
3363             <source>TOP_SHADING_COLOR</source>
3364             <translation>Set shading color</translation>
3365         </message>
3366         <message>
3367             <source>TOP_SHAPE_PROCESS</source>
3368             <translation>Perform shape processing</translation>
3369         </message>
3370         <message>
3371             <source>TOP_SHELL</source>
3372             <translation>Build a shell</translation>
3373         </message>
3374         <message>
3375             <source>TOP_SKETCH</source>
3376             <translation>Sketch</translation>
3377         </message>
3378         <message>
3379             <source>TOP_SOLID</source>
3380             <translation>Build a solid</translation>
3381         </message>
3382         <message>
3383             <source>TOP_SPHERE</source>
3384             <translation>Create a sphere</translation>
3385         </message>
3386         <message>
3387             <source>TOP_STEP_VALUE</source>
3388             <translation>Set step value</translation>
3389         </message>
3390         <message>
3391             <source>TOP_SUPPERSS_HOLES</source>
3392             <translation>Perform suppress holes</translation>
3393         </message>
3394         <message>
3395             <source>TOP_SUPPRESS_FACES</source>
3396             <translation>Perform suppress faces</translation>
3397         </message>
3398         <message>
3399             <source>TOP_SUPPRESS_INT_WIRES</source>
3400             <translation>Perform suppress internal wires</translation>
3401         </message>
3402         <message>
3403             <source>TOP_TOLERANCE</source>
3404             <translation>Compute tolerance</translation>
3405         </message>
3406         <message>
3407             <source>TOP_TORUS</source>
3408             <translation>Create a torus</translation>
3409         </message>
3410         <message>
3411             <source>TOP_TRANSLATION</source>
3412             <translation>Translation</translation>
3413         </message>
3414         <message>
3415             <source>TOP_VECTOR</source>
3416             <translation>Create a vector</translation>
3417         </message>
3418         <message>
3419             <source>TOP_WHAT_IS</source>
3420             <translation>What is</translation>
3421         </message>
3422         <message>
3423             <source>TOP_WIRE</source>
3424             <translation>Build a wire</translation>
3425         </message>
3426         <message>
3427             <source>TOP_WORK_PLANE</source>
3428             <translation>Create a working plane</translation>
3429         </message>
3430         <message>
3431             <source>WRN_NOT_IMPLEMENTED</source>
3432             <translation>Sorry, this functionality is not yet implemented</translation>
3433         </message>
3434         <message>
3435             <source>_S_</source>
3436             <translation>(s)</translation>
3437         </message>
3438         <message>
3439             <source>NOT_FOUND_ANY</source>
3440             <translation>Not a single entity has been found</translation>
3441         </message>
3442         <message>
3443             <source>GEOM_FACE_I</source>
3444             <translation>Face %1</translation>
3445         </message>
3446         <message>
3447             <source>GEOM_CONSTANT_RADIUS</source>
3448             <translation>Radius :</translation>
3449         </message>
3450         <message>
3451             <source>GEOM_R1</source>
3452             <translation>R1 :</translation>
3453         </message>
3454         <message>
3455             <source>GEOM_R2</source>
3456             <translation>R2 :</translation>
3457         </message>
3458         <message>
3459             <source>GEOM_BOTHWAY</source>
3460             <translation>Both Directions</translation>
3461         </message>
3462         <message>
3463             <source>GEOM_NORMALE</source>
3464             <translation>Normal To A Face</translation>
3465         </message>
3466         <message>
3467             <source>GEOM_VECTOR_NORMALE</source>
3468             <translation>Vector_Normal</translation>
3469         </message>
3470         <message>
3471             <source>GEOM_LINE1</source>
3472             <translation>Line 1</translation>
3473         </message>
3474         <message>
3475             <source>GEOM_LINE2</source>
3476             <translation>Line 2</translation>
3477         </message>
3478         <message>
3479             <source>GEOM_D</source>
3480             <translation>D :</translation>
3481         </message>
3482         <message>
3483             <source>GEOM_CHAMFER_EDGE</source>
3484             <translation>Chamfer On Selected Edges</translation>
3485         </message>
3486         <message>
3487             <source>SELECTED_EDGE</source>
3488             <translation>Selected Edges</translation>
3489         </message>
3490         <message>
3491             <source>GEOM_NORMALE_TITLE</source>
3492             <translation>Create Normal To A Face</translation>
3493         </message>
3494         <message>
3495             <source>GEOM_MEASURE_ANGLE_TITLE</source>
3496             <translation>Angle Between Two Straight Edges/Lines/Vectors</translation>
3497         </message>
3498         <message>
3499             <source>GEOM_MEASURE_ANGLE_ANGLE</source>
3500             <translation>Angle</translation>
3501         </message>
3502         <message>
3503             <source>GEOM_MEASURE_ANGLE_OBJ</source>
3504             <translation>Objects And Results</translation>
3505         </message>
3506         <message>
3507             <source>GEOM_MEASURE_ANGLE_IS</source>
3508             <translation>Angle in degrees :</translation>
3509         </message>
3510         <message>
3511             <source>GEOM_LINE_INTERSECTION</source>
3512             <translation>Point On Lines Intersection</translation>
3513         </message>
3514         <message>
3515             <source>GEOM_KEEP_NONLIMIT_SHAPES</source>
3516             <translation>Keep shapes of lower type</translation>
3517         </message>
3518         <message>
3519             <source>GEOM_CENTER_2POINTS</source>
3520             <translation>Center and two points</translation>
3521         </message>
3522         <message>
3523             <source>GEOM_REMOVE_EXTRA_EDGES_TITLE</source>
3524             <translation>Remove extra edges</translation>
3525         </message>
3526         <message>
3527             <source>GEOM_REMOVE_EXTRA_EDGES</source>
3528             <translation>Object to remove extra edges</translation>
3529         </message>
3530         <message>
3531             <source>REMOVE_EXTRA_EDGES_NEW_OBJ_NAME</source>
3532             <translation>NoExtraEdges</translation>
3533         </message>
3534         <message>
3535             <source>TOP_REMOVE_EXTRA_EDGES</source>
3536             <translation>Remove extra edges</translation>
3537         </message>
3538         <message>
3539             <source>MEN_REMOVE_EXTRA_EDGES</source>
3540             <translation>Remove Extra Edges</translation>
3541         </message>
3542         <message>
3543             <source>STB_REMOVE_EXTRA_EDGES</source>
3544             <translation>Remove extra edges</translation>
3545         </message>
3546         <message>
3547             <source>TOP_NORMALE</source>
3548             <translation>Compute normal to a face</translation>
3549         </message>
3550         <message>
3551             <source>MEN_NORMALE</source>
3552             <translation>Normal to a Face</translation>
3553         </message>
3554         <message>
3555             <source>STB_NORMALE</source>
3556             <translation>Compute normal to a face in a point (optional)</translation>
3557         </message>
3558         <message>
3559             <source>TOP_MEASURE_ANGLE</source>
3560             <translation>Compute angle</translation>
3561         </message>
3562         <message>
3563             <source>MEN_MEASURE_ANGLE</source>
3564             <translation>Angle</translation>
3565         </message>
3566         <message>
3567             <source>STB_MEASURE_ANGLE</source>
3568             <translation>Compute angle between two lines or linear edges</translation>
3569         </message>
3570         <message>
3571             <source>TOP_POP_AUTO_COLOR</source>
3572             <translation>Auto color</translation>
3573         </message>
3574         <message>
3575             <source>MEN_POP_AUTO_COLOR</source>
3576             <translation>Auto Color</translation>
3577         </message>
3578         <message>
3579             <source>STB_POP_AUTO_COLOR</source>
3580             <translation>Auto color</translation>
3581         </message>
3582         <message>
3583             <source>TOP_POP_DISABLE_AUTO_COLOR</source>
3584             <translation>Disable auto color</translation>
3585         </message>
3586         <message>
3587             <source>MEN_POP_DISABLE_AUTO_COLOR</source>
3588             <translation>Disable Auto Color</translation>
3589         </message>
3590         <message>
3591             <source>STB_POP_DISABLE_AUTO_COLOR</source>
3592             <translation>Disable auto color</translation>
3593         </message>
3594         <message>
3595             <source>GEOM_RESULT_NAME_GRP</source>
3596             <translation>Result name</translation>
3597         </message>
3598         <message>
3599             <source>GEOM_RESULT_NAME_LBL</source>
3600             <translation>Name</translation>
3601         </message>
3602         <message>
3603             <source>GEOM_FILLING_APPROX</source>
3604             <translation>Approximation</translation>
3605         </message>
3606         <message>
3607             <source>GEOM_WRN_NO_APPROPRIATE_SELECTION</source>
3608             <translation>No appropriate objects selected</translation>
3609         </message>
3610         <message>
3611             <source>GEOM_SHAPES_ON_SHAPE</source>
3612             <translation>Get shapes on shape</translation>
3613         </message>
3614         <message>
3615             <source>GEOM_SHAPES_ON_SHAPE_ESHAPE</source>
3616             <translation>Shape for exploding</translation>
3617         </message>
3618         <message>
3619             <source>GEOM_SHAPES_ON_SHAPE_CSHAPE</source>
3620             <translation>Shape for checking</translation>
3621         </message>
3622         <message>
3623             <source>GEOM_SHAPES_ON_SHAPE_STATE</source>
3624             <translation>State</translation>
3625         </message>
3626         <message>
3627             <source>GEOM_KIND_OF_SHAPE</source>
3628             <translation>Kind of Shape :</translation>
3629         </message>
3630         <message>
3631             <source>GEOM_CLOSED</source>
3632             <translation>Closed</translation>
3633         </message>
3634         <message>
3635             <source>GEOM_UNCLOSED</source>
3636             <translation>Opened</translation>
3637         </message>
3638         <message>
3639             <source>GEOM_CLOSEDUNCLOSED</source>
3640             <translation>Not defined, Closed or Opened. Possibly, error occured.</translation>
3641         </message>
3642         <message>
3643             <source>GEOM_DISK_CIRCLE</source>
3644             <translation>Disk</translation>
3645         </message>
3646         <message>
3647             <source>GEOM_DISK_ELLIPSE</source>
3648             <translation>Elliptical face</translation>
3649         </message>
3650         <message>
3651             <source>GEOM_PLANAR_FACE</source>
3652             <translation>Planar Face</translation>
3653         </message>
3654         <message>
3655             <source>GEOM_POLYGON</source>
3656             <translation>Polygon</translation>
3657         </message>
3658         <message>
3659             <source>GEOM_NORMAL</source>
3660             <translation>Normal direction</translation>
3661         </message>
3662         <message>
3663             <source>GEOM_DIRECTION</source>
3664             <translation>Direction</translation>
3665         </message>
3666         <message>
3667             <source>GEOM_UPARAMETER</source>
3668             <translation>U-parameter :</translation>
3669         </message>
3670         <message>
3671             <source>GEOM_VPARAMETER</source>
3672             <translation>V-parameter :</translation>
3673         </message>
3674         <message>
3675             <source>GEOM_X_I</source>
3676             <translation>X%1 :</translation>
3677         </message>
3678         <message>
3679             <source>GEOM_Y_I</source>
3680             <translation>Y%1 :</translation>
3681         </message>
3682         <message>
3683             <source>GEOM_Z_I</source>
3684             <translation>Z%1 :</translation>
3685         </message>
3686         <message>
3687             <source>GEOM_SHAPES_ON_SHAPE_TITLE</source>
3688             <translation>Get shapes on shape</translation>
3689         </message>
3690         <message>
3691             <source>GEOM_SCALE_FACTOR_X</source>
3692             <translation>Scale Factor X :</translation>
3693         </message>
3694         <message>
3695             <source>GEOM_SCALE_FACTOR_Y</source>
3696             <translation>Scale Factor Y :</translation>
3697         </message>
3698         <message>
3699             <source>GEOM_SCALE_FACTOR_Z</source>
3700             <translation>Scale Factor Z :</translation>
3701         </message>
3702         <message>
3703             <source>GEOM_STATE_IN</source>
3704             <translation>IN</translation>
3705         </message>
3706         <message>
3707             <source>GEOM_STATE_OUT</source>
3708             <translation>OUT</translation>
3709         </message>
3710         <message>
3711             <source>GEOM_STATE_ON</source>
3712             <translation>ON</translation>
3713         </message>
3714         <message>
3715             <source>GEOM_STATE_ONIN</source>
3716             <translation>ONIN</translation>
3717         </message>
3718         <message>
3719             <source>GEOM_STATE_ONOUT</source>
3720             <translation>ONOUT</translation>
3721         </message>
3722         <message>
3723             <source>GEOM_STATE_INOUT</source>
3724             <translation>INOUT</translation>
3725         </message>
3726         <message>
3727             <source>TOP_GET_SHAPES_ON_SHAPES</source>
3728             <translation>Get shapes on shape</translation>
3729         </message>
3730         <message>
3731             <source>MEN_GET_SHAPES_ON_SHAPES</source>
3732             <translation>Get Shapes on Shape</translation>
3733         </message>
3734         <message>
3735             <source>STB_GET_SHAPES_ON_SHAPES</source>
3736             <translation>Get shapes on shape</translation>
3737         </message>
3738         <message>
3739             <source>GEOM_PUBLISH_RESULT_GRP</source>
3740             <translation>Advanced options</translation>
3741         </message>
3742         <message>
3743             <source>GEOM_RESTORE_SUB_SHAPES</source>
3744             <translation>Set presentation parameters and subshapes from arguments</translation>
3745         </message>
3746         <message>
3747             <source>GEOM_ALL_IMPORT_FILES</source>
3748             <translation>All supported formats ( %1 )</translation>
3749         </message>
3750         <message>
3751             <source>GEOM_UNSUPPORTED_TYPE</source>
3752             <translation>Unsupported format for the file</translation>
3753         </message>
3754         <message>
3755             <source>GEOM_UNKNOWN_IMPORT_ERROR</source>
3756             <translation>Unknown error</translation>
3757         </message>
3758         <message>
3759             <source>GEOM_IMPORT_ERRORS</source>
3760             <translation>Import operation has finished with errors:</translation>
3761         </message>
3762     </context>
3763     <context>
3764         <name>BasicGUI_MarkerDlg</name>
3765         <message>
3766             <source>CAPTION</source>
3767             <translation>Local CS Construction</translation>
3768         </message>
3769         <message>
3770             <source>DX</source>
3771             <translation>Dx</translation>
3772         </message>
3773         <message>
3774             <source>DY</source>
3775             <translation>Dy</translation>
3776         </message>
3777         <message>
3778             <source>DZ</source>
3779             <translation>Dz</translation>
3780         </message>
3781         <message>
3782             <source>LCS_NAME</source>
3783             <translation>LocalCS</translation>
3784         </message>
3785         <message>
3786             <source>LOCALCS</source>
3787             <translation>Local coordinate system</translation>
3788         </message>
3789         <message>
3790             <source>ORIGIN</source>
3791             <translation>Coordinates of origin</translation>
3792         </message>
3793         <message>
3794             <source>VEC_PARALLEL</source>
3795             <translation>Coordinate system axes cannot be parallel</translation>
3796         </message>
3797         <message>
3798             <source>XDIR</source>
3799             <translation>X axis direction</translation>
3800         </message>
3801         <message>
3802             <source>YDIR</source>
3803             <translation>Y axis direction</translation>
3804         </message>
3805     </context>
3806     <context>
3807         <name>BlocksGUI_BlockDlg</name>
3808         <message>
3809             <source>FACE_1</source>
3810             <translation>Face 1</translation>
3811         </message>
3812         <message>
3813             <source>FACE_2</source>
3814             <translation>Face 2</translation>
3815         </message>
3816         <message>
3817             <source>FACE_3</source>
3818             <translation>Face 3</translation>
3819         </message>
3820         <message>
3821             <source>FACE_4</source>
3822             <translation>Face 4</translation>
3823         </message>
3824         <message>
3825             <source>FACE_5</source>
3826             <translation>Face 5</translation>
3827         </message>
3828         <message>
3829             <source>FACE_6</source>
3830             <translation>Face 6</translation>
3831         </message>
3832     </context>
3833     <context>
3834         <name>BlocksGUI_ExplodeDlg</name>
3835         <message>
3836             <source>NB_FACES_MAX</source>
3837             <translation>Max. nb. faces</translation>
3838         </message>
3839         <message>
3840             <source>NB_FACES_MIN</source>
3841             <translation>Min. nb. faces</translation>
3842         </message>
3843     </context>
3844     <context>
3845         <name>BlocksGUI_QuadFaceDlg</name>
3846         <message>
3847             <source>EDGE_1</source>
3848             <translation>Edge 1</translation>
3849         </message>
3850         <message>
3851             <source>EDGE_2</source>
3852             <translation>Edge 2</translation>
3853         </message>
3854         <message>
3855             <source>EDGE_3</source>
3856             <translation>Edge 3</translation>
3857         </message>
3858         <message>
3859             <source>EDGE_4</source>
3860             <translation>Edge 4</translation>
3861         </message>
3862         <message>
3863             <source>VERTEX_1</source>
3864             <translation>Vertex 1</translation>
3865         </message>
3866         <message>
3867             <source>VERTEX_2</source>
3868             <translation>Vertex 2</translation>
3869         </message>
3870         <message>
3871             <source>VERTEX_3</source>
3872             <translation>Vertex 3</translation>
3873         </message>
3874         <message>
3875             <source>VERTEX_4</source>
3876             <translation>Vertex 4</translation>
3877         </message>
3878     </context>
3879     <context>
3880         <name>BlocksGUI_TrsfDlg</name>
3881         <message>
3882             <source>FACE_1</source>
3883             <translation>Face 1</translation>
3884         </message>
3885         <message>
3886             <source>FACE_1U</source>
3887             <translation>Face 1 U</translation>
3888         </message>
3889         <message>
3890             <source>FACE_1V</source>
3891             <translation>Face 1 V</translation>
3892         </message>
3893         <message>
3894             <source>FACE_2</source>
3895             <translation>Face 2</translation>
3896         </message>
3897         <message>
3898             <source>FACE_2U</source>
3899             <translation>Face 2 U</translation>
3900         </message>
3901         <message>
3902             <source>FACE_2V</source>
3903             <translation>Face 2 V</translation>
3904         </message>
3905     </context>
3906     <context>
3907         <name>EntityGUI_SketcherDlg</name>
3908         <message>
3909             <source>CANNOT_CLOSE</source>
3910             <translation>It is impossible to close sketch
3911 Number of sketch points too small</translation>
3912         </message>
3913     </context>
3914     <context>
3915         <name>EntityGUI_SubShapeDlg</name>
3916         <message>
3917             <source>NO_SUBSHAPES_SELECTED</source>
3918             <translation>Please, select one or more sub-shapes</translation>
3919         </message>
3920     </context>
3921     <context>
3922         <name>GroupGUI</name>
3923         <message>
3924             <source>NO_GROUP</source>
3925             <translation>Please, select a group to edit</translation>
3926         </message>
3927     </context>
3928     <context>
3929         <name>GroupGUI_GroupDlg</name>
3930         <message>
3931             <source>ADD</source>
3932             <translation>Add</translation>
3933         </message>
3934         <message>
3935             <source>CREATE_GROUP_TITLE</source>
3936             <translation>Create Group</translation>
3937         </message>
3938         <message>
3939             <source>EDIT_GROUP_TITLE</source>
3940             <translation>Edit Group</translation>
3941         </message>
3942         <message>
3943             <source>EMPTY_LIST</source>
3944             <translation>Please, select one or more sub-shapes to put into the group</translation>
3945         </message>
3946         <message>
3947             <source>EMPTY_NAME</source>
3948             <translation>Please, specify a non-empty group name</translation>
3949         </message>
3950         <message>
3951             <source>GROUP_NAME</source>
3952             <translation>Group Name</translation>
3953         </message>
3954         <message>
3955             <source>GROUP_PREFIX</source>
3956             <translation>Group</translation>
3957         </message>
3958         <message>
3959             <source>MAIN_SHAPE</source>
3960             <translation>Main Shape</translation>
3961         </message>
3962         <message>
3963             <source>MAIN_SUB_SHAPES</source>
3964             <translation>Main Shape And Sub-Shapes</translation>
3965         </message>
3966         <message>
3967             <source>NO_GROUP</source>
3968             <translation>Please, select a group to edit</translation>
3969         </message>
3970         <message>
3971             <source>NO_MAIN_OBJ</source>
3972             <translation>Please, select a main shape</translation>
3973         </message>
3974         <message>
3975             <source>REMOVE</source>
3976             <translation>Remove</translation>
3977         </message>
3978         <message>
3979             <source>SELECT_ALL</source>
3980             <translation>Select All</translation>
3981         </message>
3982         <message>
3983             <source>SHAPE_SEL_RESTR</source>
3984             <translation>Main Shape Selection restriction</translation>
3985         </message>
3986         <message>
3987             <source>SHAPE_TYPE</source>
3988             <translation>Shape Type</translation>
3989         </message>
3990         <message>
3991             <source>NO_RESTR</source>
3992             <translation>No restriction</translation>
3993         </message>
3994         <message>
3995             <source>GEOM_PARTS_OF_SHAPE2</source>
3996             <translation>Geometrical parts of the Second Shape</translation>
3997         </message>
3998         <message>
3999             <source>SUBSHAPES_OF_SHAPE2</source>
4000             <translation>Only Sub-Shapes of the Second Shape</translation>
4001         </message>
4002         <message>
4003             <source>SECOND_SHAPE</source>
4004             <translation>Second Shape</translation>
4005         </message>
4006     </context>
4007     <context>
4008         <name>MeasureGUI_1Sel1TextView1Check_QTD</name>
4009         <message>
4010             <source>CHECK_SHAPE_GEOMETRY</source>
4011             <translation>Check also geometry</translation>
4012         </message>
4013     </context>
4014     <context>
4015         <name>MeasureGUI_PointDlg</name>
4016         <message>
4017             <source>CAPTION</source>
4018             <translation>Point Coordinates</translation>
4019         </message>
4020         <message>
4021             <source>COORDINATES</source>
4022             <translation>Point and its coordinates</translation>
4023         </message>
4024         <message>
4025             <source>POINT</source>
4026             <translation>Point</translation>
4027         </message>
4028         <message>
4029             <source>X</source>
4030             <translation>X</translation>
4031         </message>
4032         <message>
4033             <source>Y</source>
4034             <translation>Y</translation>
4035         </message>
4036         <message>
4037             <source>Z</source>
4038             <translation>Z</translation>
4039         </message>
4040     </context>
4041     <context>
4042         <name>OperationGUI_ChamferDlg</name>
4043         <message>
4044             <source>D</source>
4045             <translation>D</translation>
4046         </message>
4047         <message>
4048             <source>FACE_1</source>
4049             <translation>Face 1</translation>
4050         </message>
4051         <message>
4052             <source>FACE_2</source>
4053             <translation>Face 2</translation>
4054         </message>
4055         <message>
4056             <source>SELECTED_FACES</source>
4057             <translation>Selected faces</translation>
4058         </message>
4059     </context>
4060     <context>
4061         <name>OperationGUI_FilletDlg</name>
4062         <message>
4063             <source>SELECTED_EDGES</source>
4064             <translation>Selected edges</translation>
4065         </message>
4066         <message>
4067             <source>SELECTED_FACES</source>
4068             <translation>Selected faces</translation>
4069         </message>
4070     </context>
4071     <context>
4072         <name>RepairGUI_FreeBoundDlg</name>
4073         <message>
4074             <source>CAPTION</source>
4075             <translation>Check free boundaries</translation>
4076         </message>
4077         <message>
4078             <source>FREE_BOUND</source>
4079             <translation>Free boundaries</translation>
4080         </message>
4081         <message>
4082             <source>NUMBER_CLOSED</source>
4083             <translation>Number of closed free boundaries: </translation>
4084         </message>
4085         <message>
4086             <source>NUMBER_OPEN</source>
4087             <translation>Number of open free boundaries: </translation>
4088         </message>
4089     </context>
4090     <context>
4091         <name>RepairGUI_GlueDlg</name>
4092         <message>
4093             <source>FACES_FOR_GLUING_ARE_DETECTED</source>
4094             <translation>There are %1 face(s) that can be glued. They are coloured on the screen with red colour.
4095 Please close this message box and select faces for glueing</translation>
4096         </message>
4097         <message>
4098             <source>GLUE_FACES</source>
4099             <translation>Glue faces</translation>
4100         </message>
4101         <message>
4102             <source>SELECT_FACES</source>
4103             <translation>Select Faces</translation>
4104         </message>
4105         <message>
4106             <source>THERE_ARE_NO_FACES_FOR_GLUING</source>
4107             <translation>There are no faces for gluing</translation>
4108         </message>
4109     </context>
4110     <context>
4111         <name>RepairGUI_ShapeProcessDlg</name>
4112         <message>
4113             <source>ERROR_NO_OBJECTS</source>
4114             <translation>Please, select a geometrical object for Shape Processing.</translation>
4115         </message>
4116         <message>
4117             <source>ERROR_NO_OPERATORS</source>
4118             <translation>Please, select at least one Shape Process operation to proceed.</translation>
4119         </message>
4120         <message>
4121             <source>TIME_CONSUMING</source>
4122             <translation>Enabling this option may result in a very time-consuming operation for some input shapes.
4123 Would you like to continue?</translation>
4124         </message>
4125     </context>
4126     <context>
4127         <name>GEOMToolsGUI_DeleteDlg</name>
4128         <message>
4129             <source>GEOM_REALLY_DELETE</source>
4130             <translation>Do you really want to delete %1 object(s)?</translation>
4131         </message>
4132         <message>
4133             <source>GEOM_REALLY_DELETE_ALL</source>
4134             <translation>Do you really want to delete all objects?</translation>
4135         </message>
4136         <message>
4137             <source>GEOM_DELETE_OBJECTS</source>
4138             <translation>Delete objects</translation>
4139         </message>
4140     </context>
4141 </TS>