src/GEOMGUI/GEOM_msg_en.ts

   1 <!DOCTYPE TS>
   2 <TS version="1.1" >
   3     <context>
   4         <name>@default</name>
   5         <message>
   6             <source>CHANGE_ORIENTATION_NEW_OBJ_NAME</source>
   7             <translation>Invert</translation>
   8         </message>
   9         <message>
  10             <source>CLOSE_CONTOUR_NEW_OBJ_NAME</source>
  11             <translation>CloseContour</translation>
  12         </message>
  13         <message>
  14             <source>DEP_OBJECT</source>
  15             <translation>Selected object has been used to create another one.
  16 It can't be deleted </translation>
  17         </message>
  18         <message>
  19             <source>DEVIDE_EDGE_NEW_OBJECT_NAME</source>
  20             <translation>NewObject</translation>
  21         </message>
  22         <message>
  23             <source>ERROR_SHAPE_TYPE</source>
  24             <translation>Object of incorrect type selected!
  25 Please, select face, shell or solid and try again</translation>
  26         </message>
  27         <message>
  28             <source> iErr : 10</source>
  29             <translation>the Classifier is NULL</translation>
  30         </message>
  31         <message>
  32             <source> iErr : 11</source>
  33             <translation>the Shape is NULL</translation>
  34         </message>
  35         <message>
  36             <source> iErr : 12</source>
  37             <translation>Unallowed Type of Subshape</translation>
  38         </message>
  39         <message>
  40             <source> iErr : 13</source>
  41             <translation>Unallowed State</translation>
  42         </message>
  43         <message>
  44             <source> iErr : 15</source>
  45             <translation>Unallowed Surface Type</translation>
  46         </message>
  47         <message>
  48             <source> iErr : 20</source>
  49             <translation>Triangulation is not Found</translation>
  50         </message>
  51         <message>
  52             <source> iErr : 30</source>
  53             <translation>Can not Obtain the Line From the Link</translation>
  54         </message>
  55         <message>
  56             <source> iErr : 40</source>
  57             <translation>A Point Can Not Be Classified</translation>
  58         </message>
  59         <message>
  60             <source> iErr : 41</source>
  61             <translation>Invalid Data for Classifier</translation>
  62         </message>
  63         <message>
  64             <source>GEOM_2D_CONTINUTY</source>
  65             <translation>2D continuity</translation>
  66         </message>
  67         <message>
  68             <source>GEOM_2D_CURVE_MODE</source>
  69             <translation>2D curve mode</translation>
  70         </message>
  71         <message>
  72             <source>GEOM_2D_TOLERANCE</source>
  73             <translation>2D tolerance</translation>
  74         </message>
  75         <message>
  76             <source>GEOM_3D_CONTINUTY</source>
  77             <translation>3D continuity</translation>
  78         </message>
  79         <message>
  80             <source>GEOM_3D_CURVE_MODE</source>
  81             <translation>3D curve mode</translation>
  82         </message>
  83         <message>
  84             <source>GEOM_3D_TOLERANCE</source>
  85             <translation>3D tolerance</translation>
  86         </message>
  87         <message>
  88             <source>GEOM_3_POINTS</source>
  89             <translation>3 points</translation>
  90         </message>
  91         <message>
  92             <source>GEOM_ADD_POINT</source>
  93             <translation>Add point</translation>
  94         </message>
  95         <message>
  96             <source>GEOM_ANGLE</source>
  97             <translation>Angle :</translation>
  98         </message>
  99         <message>
 100             <source>GEOM_ANGLE_1</source>
 101             <translation>Angle</translation>
 102         </message>
 103         <message>
 104             <source>GEOM_ARC</source>
 105             <translation>Arc</translation>
 106         </message>
 107         <message>
 108             <source>GEOM_ARCHIMEDE</source>
 109             <translation>Archimede</translation>
 110         </message>
 111         <message>
 112             <source>GEOM_ARCHIMEDE_TITLE</source>
 113             <translation>Archimede Construction</translation>
 114         </message>
 115         <message>
 116             <source>GEOM_ARC_TITLE</source>
 117             <translation>Arc Construction</translation>
 118         </message>
 119         <message>
 120             <source>GEOM_ARGUMENTS</source>
 121             <translation>Arguments</translation>
 122         </message>
 123         <message>
 124             <source>GEOM_AXE_MIRROR</source>
 125             <translation>Axe Mirror</translation>
 126         </message>
 127         <message>
 128             <source>GEOM_AXIS</source>
 129             <translation>Axis</translation>
 130         </message>
 131         <message>
 132             <source>GEOM_BASE</source>
 133             <translation>Base</translation>
 134         </message>
 135         <message>
 136             <source>GEOM_BASE_OBJECT</source>
 137             <translation>Base Object</translation>
 138         </message>
 139         <message>
 140             <source>GEOM_BASE_POINT</source>
 141             <translation>Base Point</translation>
 142         </message>
 143         <message>
 144             <source>GEOM_BEZIER</source>
 145             <translation>Bezier</translation>
 146         </message>
 147         <message>
 148             <source>GEOM_BLOCK</source>
 149             <translation>Hexahedral Solid</translation>
 150         </message>
 151         <message>
 152             <source>GEOM_BLOCKS_COMPOUND</source>
 153             <translation>BlocksCompound</translation>
 154         </message>
 155         <message>
 156             <source>GEOM_BLOCK_EXPLODE</source>
 157             <translation>Sub Blocks</translation>
 158         </message>
 159         <message>
 160             <source>GEOM_BLOCK_EXPLODE_TITLE</source>
 161             <translation>Sub Blocks Selection</translation>
 162         </message>
 163         <message>
 164             <source>GEOM_BLOCK_MULTITRSF</source>
 165             <translation>Block Multi-Transformation</translation>
 166         </message>
 167         <message>
 168             <source>GEOM_BLOCK_MULTITRSF_DOUBLE</source>
 169             <translation>Multi-Transformation Double</translation>
 170         </message>
 171         <message>
 172             <source>GEOM_BLOCK_MULTITRSF_SIMPLE</source>
 173             <translation>Multi-Transformation Simple</translation>
 174         </message>
 175         <message>
 176             <source>GEOM_BLOCK_MULTITRSF_TITLE</source>
 177             <translation>Block Multi-Transformation</translation>
 178         </message>
 179         <message>
 180             <source>GEOM_BLOCK_TITLE</source>
 181             <translation>Hexahedral Solid Construction</translation>
 182         </message>
 183         <message>
 184             <source>GEOM_BNDBOX</source>
 185             <translation>Bounding Box</translation>
 186         </message>
 187         <message>
 188             <source>GEOM_BNDBOX_OBJDIM</source>
 189             <translation>Object And Its Dimensions</translation>
 190         </message>
 191         <message>
 192             <source>GEOM_BNDBOX_TITLE</source>
 193             <translation>Bounding Box Informations</translation>
 194         </message>
 195         <message>
 196             <source>GEOM_BOX</source>
 197             <translation>Box</translation>
 198         </message>
 199         <message>
 200             <source>GEOM_BOX_OBJ</source>
 201             <translation>Dimensions At Origin</translation>
 202         </message>
 203         <message>
 204             <source>GEOM_BOX_TITLE</source>
 205             <translation>Box Construction</translation>
 206         </message>
 207         <message>
 208             <source>GEOM_BSplineRestriction</source>
 209             <translation>BSplineRestriction</translation>
 210         </message>
 211         <message>
 212             <source>GEOM_BUT_APPLY</source>
 213             <translation>&amp;Apply</translation>
 214         </message>
 215         <message>
 216             <source>GEOM_BUT_CANCEL</source>
 217             <translation>&amp;Cancel</translation>
 218         </message>
 219         <message>
 220             <source>GEOM_BUT_CLOSE</source>
 221             <translation>&amp;Close</translation>
 222         </message>
 223         <message>
 224             <source>GEOM_BUT_CLOSE_SKETCH</source>
 225             <translation>Sketch Closure</translation>
 226         </message>
 227         <message>
 228             <source>GEOM_BUT_END_SKETCH</source>
 229             <translation>Sketch Validation</translation>
 230         </message>
 231         <message>
 232             <source>GEOM_BUT_EXPLODE</source>
 233             <translation>&amp;Explode</translation>
 234         </message>
 235         <message>
 236             <source>GEOM_BUT_HELP</source>
 237             <translation>&amp;Help</translation>
 238         </message>
 239         <message>
 240             <source>GEOM_BUT_NO</source>
 241             <translation>&amp;No</translation>
 242         </message>
 243         <message>
 244             <source>GEOM_BUT_OK</source>
 245             <translation>O&amp;k</translation>
 246         </message>
 247         <message>
 248             <source>GEOM_BUT_APPLY_AND_CLOSE</source>
 249             <translation>A&amp;pply and Close</translation>
 250         </message>
 251         <message>
 252             <source>GEOM_BUT_YES</source>
 253             <translation>&amp;Yes</translation>
 254         </message>
 255         <message>
 256             <source>GEOM_BY_LENGTH</source>
 257             <translation>By length</translation>
 258         </message>
 259         <message>
 260             <source>GEOM_BY_PARAMETER</source>
 261             <translation>By parameter</translation>
 262         </message>
 263         <message>
 264             <source>GEOM_CENTER</source>
 265             <translation>Center</translation>
 266         </message>
 267         <message>
 268             <source>GEOM_CENTER_POINT</source>
 269             <translation>Center Point</translation>
 270         </message>
 271         <message>
 272             <source>GEOM_CENTRAL_POINT</source>
 273             <translation>Central Point</translation>
 274         </message>
 275         <message>
 276             <source>GEOM_CHAMFER</source>
 277             <translation>Chamfer</translation>
 278         </message>
 279         <message>
 280             <source>GEOM_CHAMFER_ABORT</source>
 281             <translation>Chamfer can't be computed with %1 and %2</translation>
 282         </message>
 283         <message>
 284             <source>GEOM_CHAMFER_ALL</source>
 285             <translation>Chamfer On Whole Shape</translation>
 286         </message>
 287         <message>
 288             <source>GEOM_CHAMFER_EDGES</source>
 289             <translation>Chamfer On Edges From Shape</translation>
 290         </message>
 291         <message>
 292             <source>GEOM_CHAMFER_FACES</source>
 293             <translation>Chamfer On Faces From Shape</translation>
 294         </message>
 295         <message>
 296             <source>GEOM_CHAMFER_TITLE</source>
 297             <translation>Chamfer Construction</translation>
 298         </message>
 299         <message>
 300             <source>GEOM_CHANGE_ORIENTATION</source>
 301             <translation>Objects to change orientation</translation>
 302         </message>
 303         <message>
 304             <source>GEOM_CHANGE_ORIENTATION_TITLE</source>
 305             <translation>Change orientation</translation>
 306         </message>
 307         <message>
 308             <source>GEOM_CHECK_BLOCKS_COMPOUND</source>
 309             <translation>Check and Improve Blocks Compound</translation>
 310         </message>
 311         <message>
 312             <source>GEOM_CHECK_BLOCKS_COMPOUND_ERRORS</source>
 313             <translation>Errors</translation>
 314         </message>
 315         <message>
 316             <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS</source>
 317             <translation>The Compound of Blocks has errors</translation>
 318         </message>
 319         <message>
 320             <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS</source>
 321             <translation>The Compound of Blocks has no errors</translation>
 322         </message>
 323         <message>
 324             <source>GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES</source>
 325             <translation>Incriminated Sub-Shapes</translation>
 326         </message>
 327         <message>
 328             <source>GEOM_CHECK_INFOS</source>
 329             <translation>Object And Its Topological Information</translation>
 330         </message>
 331         <message>
 332             <source>GEOM_CHECK_SHAPE</source>
 333             <translation>Check Shape</translation>
 334         </message>
 335         <message>
 336             <source>GEOM_CHECK_TITLE</source>
 337             <translation>Check Shape Information</translation>
 338         </message>
 339         <message>
 340             <source>GEOM_CIRCLE</source>
 341             <translation>Circle</translation>
 342         </message>
 343         <message>
 344             <source>GEOM_CIRCLE_TITLE</source>
 345             <translation>Circle Construction</translation>
 346         </message>
 347         <message>
 348             <source>GEOM_CLOSECONTOUR_TITLE</source>
 349             <translation>Close contour</translation>
 350         </message>
 351         <message>
 352             <source>GEOM_CMASS</source>
 353             <translation>Center Of Mass</translation>
 354         </message>
 355         <message>
 356             <source>GEOM_CMASS_TITLE</source>
 357             <translation>Center Of Mass Construction</translation>
 358         </message>
 359         <message>
 360             <source>GEOM_COMMON</source>
 361             <translation>Common</translation>
 362         </message>
 363         <message>
 364             <source>GEOM_COMMON_TITLE</source>
 365             <translation>BOOLEAN : Common Of Two Objects</translation>
 366         </message>
 367         <message>
 368             <source>GEOM_COMPOUND</source>
 369             <translation>Compound</translation>
 370         </message>
 371         <message>
 372             <source>GEOM_COMPOUNDSOLID</source>
 373             <translation>CompSolid</translation>
 374         </message>
 375         <message>
 376             <source>GEOM_COMPOUND_TITLE</source>
 377             <translation>Create A Compound</translation>
 378         </message>
 379         <message>
 380             <source>GEOM_CONE</source>
 381             <translation>Cone</translation>
 382         </message>
 383         <message>
 384             <source>GEOM_CONE_TITLE</source>
 385             <translation>Cone Construction</translation>
 386         </message>
 387         <message>
 388             <source>GEOM_CONFIRM</source>
 389             <translation>Confirm operation</translation>
 390         </message>
 391         <message>
 392             <source>GEOM_CONFIRM_INFO</source>
 393             <translation>Shape contains %1 sub shapes !</translation>
 394         </message>
 395         <message>
 396             <source>GEOM_COOR</source>
 397             <translation>Coord. :</translation>
 398         </message>
 399         <message>
 400             <source>GEOM_COORDINATES</source>
 401             <translation>Coordinates</translation>
 402         </message>
 403         <message>
 404             <source>GEOM_CREATE_COPY</source>
 405             <translation>Create a copy</translation>
 406         </message>
 407         <message>
 408             <source>GEOM_CREATE_SINGLE_SOLID</source>
 409             <translation>Create a single solid</translation>
 410         </message>
 411         <message>
 412             <source>GEOM_CURVE</source>
 413             <translation>Curve</translation>
 414         </message>
 415         <message>
 416             <source>GEOM_CURVE_CONTINUTY</source>
 417             <translation>Curve continuity</translation>
 418         </message>
 419         <message>
 420             <source>GEOM_CURVE_TITLE</source>
 421             <translation>Curve Construction</translation>
 422         </message>
 423         <message>
 424             <source>GEOM_CUT</source>
 425             <translation>Cut</translation>
 426         </message>
 427         <message>
 428             <source>GEOM_CUT_TITLE</source>
 429             <translation>BOOLEAN : Cut Of Two Objects</translation>
 430         </message>
 431         <message>
 432             <source>GEOM_CYLINDER</source>
 433             <translation>Cylinder</translation>
 434         </message>
 435         <message>
 436             <source>GEOM_CYLINDER_TITLE</source>
 437             <translation>Cylinder Construction</translation>
 438         </message>
 439         <message>
 440             <source>GEOM_D1</source>
 441             <translation>D1 :</translation>
 442         </message>
 443         <message>
 444             <source>GEOM_D2</source>
 445             <translation>D2 :</translation>
 446         </message>
 447         <message>
 448             <source>GEOM_DETECT</source>
 449             <translation>Detect</translation>
 450         </message>
 451         <message>
 452             <source>GEOM_DIAGONAL_POINTS</source>
 453             <translation>Diagonal Points</translation>
 454         </message>
 455         <message>
 456             <source>GEOM_DISK</source>
 457             <translation>Disk</translation>
 458         </message>
 459         <message>
 460             <source>GEOM_DISK_TITLE</source>
 461             <translation>Create A Disk</translation>
 462         </message>
 463         <message>
 464             <source>GEOM_DIMENSIONS</source>
 465             <translation>Dimensions</translation>
 466         </message>
 467         <message>
 468             <source>GEOM_DISTANCE</source>
 469             <translation>Distance</translation>
 470         </message>
 471         <message>
 472             <source>GEOM_DIVIDE_EDGE_TITLE</source>
 473             <translation>Addition of point</translation>
 474         </message>
 475         <message>
 476             <source>GEOM_DX</source>
 477             <translation>Dx :</translation>
 478         </message>
 479         <message>
 480             <source>GEOM_DY</source>
 481             <translation>Dy :</translation>
 482         </message>
 483         <message>
 484             <source>GEOM_DZ</source>
 485             <translation>Dz :</translation>
 486         </message>
 487         <message>
 488             <source>GEOM_DropSmallEdges</source>
 489             <translation>DropSmallEdges</translation>
 490         </message>
 491         <message>
 492             <source>GEOM_EDGE</source>
 493             <translation>Edge</translation>
 494         </message>
 495         <message>
 496             <source>GEOM_EDGE_TITLE</source>
 497             <translation>Create An Edge</translation>
 498         </message>
 499         <message>
 500             <source>GEOM_ELLIPSE</source>
 501             <translation>Ellipse</translation>
 502         </message>
 503         <message>
 504             <source>GEOM_ELLIPSE_ERROR_1</source>
 505             <translation>Error creating ellipse.  Reason: minor radius is greater than major radius.</translation>
 506         </message>
 507         <message>
 508             <source>GEOM_ELLIPSE_TITLE</source>
 509             <translation>Ellipse Construction</translation>
 510         </message>
 511         <message>
 512             <source>GEOM_END_LCS</source>
 513             <translation>End LCS</translation>
 514         </message>
 515         <message>
 516             <source>GEOM_ERROR</source>
 517             <translation>Error</translation>
 518         </message>
 519         <message>
 520             <source>GEOM_ERROR_STATUS</source>
 521             <translation>Operation status</translation>
 522         </message>
 523         <message>
 524             <source>GEOM_ERR_GET_ENGINE</source>
 525             <translation>Failed to obtain GEOM Engine component.  Reload Geometry module and try again.</translation>
 526         </message>
 527         <message>
 528             <source>GEOM_ERR_LIB_NOT_FOUND</source>
 529             <translation>GUI library corresponding to the user action can not be found or loaded</translation>
 530         </message>
 531         <message>
 532             <source>GEOM_EXTRUSION</source>
 533             <translation>Extrusion</translation>
 534         </message>
 535         <message>
 536             <source>GEOM_EXTRUSION_BSV</source>
 537             <translation>Base Shape + Vector</translation>
 538         </message>
 539         <message>
 540             <source>GEOM_EXTRUSION_BSV_2P</source>
 541             <translation>Base Shape + 2 Points</translation>
 542         </message>
 543         <message>
 544             <source>GEOM_EXTRUSION_DXDYDZ</source>
 545             <translation>Base Shape + DX DY DZ Vector</translation>
 546         </message>
 547         <message>
 548             <source>GEOM_EXTRUSION_TITLE</source>
 549             <translation>Construction by Extrusion</translation>
 550         </message>
 551         <message>
 552             <source>GEOM_FACE</source>
 553             <translation>Face</translation>
 554         </message>
 555         <message>
 556             <source>GEOM_FACES</source>
 557             <translation>Faces</translation>
 558         </message>
 559         <message>
 560             <source>GEOM_FACE_FFW</source>
 561             <translation>Face creation from wires and/or edges</translation>
 562         </message>
 563         <message>
 564             <source>GEOM_FACE_OPT</source>
 565             <translation>Try to create a planar face</translation>
 566         </message>
 567         <message>
 568             <source>GEOM_FACE_OR_LCS</source>
 569             <translation>Face or LCS</translation>
 570         </message>
 571         <message>
 572             <source>GEOM_FACE_SELECTION</source>
 573             <translation>Face Selection</translation>
 574         </message>
 575         <message>
 576             <source>GEOM_FACE_TITLE</source>
 577             <translation>Create A Face</translation>
 578         </message>
 579         <message>
 580             <source>GEOM_FILLET</source>
 581             <translation>Fillet</translation>
 582         </message>
 583         <message>
 584             <source>GEOM_FILLET_ABORT</source>
 585             <translation>Fillet can't be computed with radius %1</translation>
 586         </message>
 587         <message>
 588             <source>GEOM_FILLET_ALL</source>
 589             <translation>Fillet On Whole Shape</translation>
 590         </message>
 591         <message>
 592             <source>GEOM_FILLET_EDGES</source>
 593             <translation>Fillet On Edges From Shape</translation>
 594         </message>
 595         <message>
 596             <source>GEOM_FILLET_FACES</source>
 597             <translation>Fillet On Faces From Shape</translation>
 598         </message>
 599         <message>
 600             <source>GEOM_FILLET_TITLE</source>
 601             <translation>Fillet Construction</translation>
 602         </message>
 603         <message>
 604             <source>GEOM_FILLING</source>
 605             <translation>Filling</translation>
 606         </message>
 607         <message>
 608             <source>GEOM_FILLING_ARG</source>
 609             <translation>Arguments And Parameters</translation>
 610         </message>
 611         <message>
 612             <source>GEOM_FILLING_COMPOUND</source>
 613             <translation>Edges compound</translation>
 614         </message>
 615         <message>
 616             <source>GEOM_FILLING_MAX_DEG</source>
 617             <translation>Max deg</translation>
 618         </message>
 619         <message>
 620             <source>GEOM_FILLING_MIN_DEG</source>
 621             <translation>Min deg</translation>
 622         </message>
 623         <message>
 624             <source>GEOM_FILLING_NB_ITER</source>
 625             <translation>Nb. Iter :</translation>
 626         </message>
 627         <message>
 628             <source>GEOM_FILLING_TITLE</source>
 629             <translation>Filling Surface With Edges</translation>
 630         </message>
 631         <message>
 632             <source>GEOM_FILLING_TOL_2D</source>
 633             <translation>Tol. 2D :</translation>
 634         </message>
 635         <message>
 636             <source>GEOM_FILLING_TOL_3D</source>
 637             <translation>Tol. 3D :</translation>
 638         </message>
 639         <message>
 640             <source>GEOM_FREE_BOUNDARIES</source>
 641             <translation>Free boundaries</translation>
 642         </message>
 643         <message>
 644             <source>GEOM_FREE_BOUNDS_ERROR</source>
 645             <translation>Object is not selected</translation>
 646         </message>
 647         <message>
 648             <source>GEOM_FREE_BOUNDS_MSG</source>
 649             <translation>Number of free boundaries detected: %1 (%2 closed, %3 open)</translation>
 650         </message>
 651         <message>
 652             <source>GEOM_FREE_BOUNDS_TLT</source>
 653             <translation>Free boundary detection</translation>
 654         </message>
 655         <message>
 656             <source>GEOM_FREE_FACES</source>
 657             <translation>Free faces</translation>
 658         </message>
 659         <message>
 660             <source>GEOM_FREE_FACES_TITLE</source>
 661             <translation>Free faces</translation>
 662         </message>
 663         <message>
 664             <source>GEOM_FUSE</source>
 665             <translation>Fuse</translation>
 666         </message>
 667         <message>
 668             <source>GEOM_FUSE_TITLE</source>
 669             <translation>BOOLEAN : Fuse Two Objects</translation>
 670         </message>
 671         <message>
 672             <source>GEOM_FixFaceSize</source>
 673             <translation>FixFaceSize</translation>
 674         </message>
 675         <message>
 676             <source>GEOM_FixShape</source>
 677             <translation>FixShape</translation>
 678         </message>
 679         <message>
 680             <source>GEOM_GLUE</source>
 681             <translation>Glue</translation>
 682         </message>
 683         <message>
 684             <source>GEOM_GLUE_TITLE</source>
 685             <translation>Glue faces</translation>
 686         </message>
 687         <message>
 688             <source>GEOM_HEIGHT</source>
 689             <translation>Height :</translation>
 690         </message>
 691         <message>
 692             <source>GEOM_HOLES</source>
 693             <translation>Holes</translation>
 694         </message>
 695         <message>
 696             <source>GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE</source>
 697             <translation>Identical names : select by mouse !</translation>
 698         </message>
 699         <message>
 700             <source>GEOM_IMPORT</source>
 701             <translation>Imported_Shape</translation>
 702         </message>
 703         <message>
 704             <source>GEOM_INCORRECT_INPUT</source>
 705             <translation>Incorrect input data!</translation>
 706         </message>
 707         <message>
 708             <source>GEOM_INERTIA_CONSTR</source>
 709             <translation>Matrix And Moments Of Inertia</translation>
 710         </message>
 711         <message>
 712             <source>GEOM_INERTIA_I</source>
 713             <translation>%1:1 :</translation>
 714         </message>
 715         <message>
 716             <source>GEOM_INERTIA_IXYZ</source>
 717             <translation>IX &amp; IY &amp; IZ :</translation>
 718         </message>
 719         <message>
 720             <source>GEOM_INERTIA_TITLE</source>
 721             <translation>Calculs Of Inertia</translation>
 722         </message>
 723         <message>
 724             <source>GEOM_INF_LOADED</source>
 725             <translation>File %1 loaded.</translation>
 726         </message>
 727         <message>
 728             <source>GEOM_INTERNAL_WIRES</source>
 729             <translation>Internal wires</translation>
 730         </message>
 731         <message>
 732             <source>GEOM_INTERPOL</source>
 733             <translation>Interpolation</translation>
 734         </message>
 735         <message>
 736             <source>GEOM_KEEP_OBJECT</source>
 737             <translation>Keep Object</translation>
 738         </message>
 739         <message>
 740             <source>GEOM_LENGTH</source>
 741             <translation>Length :</translation>
 742         </message>
 743         <message>
 744             <source>GEOM_LINE</source>
 745             <translation>Line</translation>
 746         </message>
 747         <message>
 748             <source>GEOM_LINE_TITLE</source>
 749             <translation>Line Construction</translation>
 750         </message>
 751         <message>
 752             <source>GEOM_MAIN_OBJECT</source>
 753             <translation>Main Object</translation>
 754         </message>
 755         <message>
 756             <source>GEOM_MARKER</source>
 757             <translation>Marker</translation>
 758         </message>
 759         <message>
 760             <source>GEOM_MARKER_TITLE</source>
 761             <translation>Create marker</translation>
 762         </message>
 763         <message>
 764             <source>GEOM_MATERIAL_ID</source>
 765             <translation>Material ID:</translation>
 766         </message>
 767         <message>
 768             <source>GEOM_MATERIAL_MATERIAL</source>
 769             <translation>Material</translation>
 770         </message>
 771         <message>
 772             <source>GEOM_MATERIAL_SET</source>
 773             <translation>&lt;&lt; Set</translation>
 774         </message>
 775         <message>
 776             <source>GEOM_MATERIAL_SHAPE</source>
 777             <translation>Shapes</translation>
 778         </message>
 779         <message>
 780             <source>GEOM_MATERIAL_TITLE</source>
 781             <translation>Define materials for Dominant Fuse</translation>
 782         </message>
 783         <message>
 784             <source>GEOM_MATRIX</source>
 785             <translation>Matrix :</translation>
 786         </message>
 787         <message>
 788             <source>GEOM_MAX</source>
 789             <translation>Max :</translation>
 790         </message>
 791         <message>
 792             <source>GEOM_MAX_3D_TOLERANCE</source>
 793             <translation>Max 3D tolerance</translation>
 794         </message>
 795         <message>
 796             <source>GEOM_MAX_TOLERANCE</source>
 797             <translation>Max tolerance</translation>
 798         </message>
 799         <message>
 800             <source>GEOM_MEN_ALL_FILES</source>
 801             <translation>All Files ( * )</translation>
 802         </message>
 803         <message>
 804             <source>GEOM_MEN_ANGLE</source>
 805             <translation>Angle :</translation>
 806         </message>
 807         <message>
 808             <source>GEOM_MEN_COMPONENT</source>
 809             <translation>Geometry</translation>
 810         </message>
 811         <message>
 812             <source>GEOM_MEN_ENTER_ANGLE</source>
 813             <translation>Enter An Angle In Degrees</translation>
 814         </message>
 815         <message>
 816             <source>GEOM_MEN_EXPORT</source>
 817             <translation>Export</translation>
 818         </message>
 819         <message>
 820             <source>GEOM_MEN_IMPORT</source>
 821             <translation>Import</translation>
 822         </message>
 823         <message>
 824             <source>GEOM_MEN_ISOS</source>
 825             <translation>Select Number Of Isos</translation>
 826         </message>
 827         <message>
 828             <source>GEOM_MEN_ISOU</source>
 829             <translation>Isos u :</translation>
 830         </message>
 831         <message>
 832             <source>GEOM_MEN_ISOV</source>
 833             <translation>Isos v :</translation>
 834         </message>
 835         <message>
 836             <source>GEOM_MEN_POPUP_NAME</source>
 837             <translation>%1 Objects</translation>
 838         </message>
 839         <message>
 840             <source>GEOM_MEN_SHADING</source>
 841             <translation>Shading</translation>
 842         </message>
 843         <message>
 844             <source>GEOM_MEN_SKETCHER_X</source>
 845             <translation>Enter a length to set X</translation>
 846         </message>
 847         <message>
 848             <source>GEOM_MEN_SKETCHER_Y</source>
 849             <translation>Enter a length to set Y</translation>
 850         </message>
 851         <message>
 852             <source>GEOM_MEN_STEP_LABEL</source>
 853             <translation>Step :</translation>
 854         </message>
 855         <message>
 856             <source>GEOM_MEN_TRANSPARENCY</source>
 857             <translation>Transparency</translation>
 858         </message>
 859         <message>
 860             <source>GEOM_MEN_TRANSPARENCY_LABEL</source>
 861             <translation>Transparency :</translation>
 862         </message>
 863         <message>
 864             <source>GEOM_MEN_WIREFRAME</source>
 865             <translation>Wireframe</translation>
 866         </message>
 867         <message>
 868             <source>GEOM_MEN_X</source>
 869             <translation>X :</translation>
 870         </message>
 871         <message>
 872             <source>GEOM_MEN_Y</source>
 873             <translation>Y :</translation>
 874         </message>
 875         <message>
 876             <source>GEOM_MESHING_DEFLECTION</source>
 877             <translation>Meshing Deflect. :</translation>
 878         </message>
 879         <message>
 880             <source>GEOM_MIN</source>
 881             <translation>Min :</translation>
 882         </message>
 883         <message>
 884             <source>GEOM_MINDIST_OBJ</source>
 885             <translation>Objects And Results</translation>
 886         </message>
 887         <message>
 888             <source>GEOM_MINDIST_TITLE</source>
 889             <translation>Minimun Distance Between Two Objects</translation>
 890         </message>
 891         <message>
 892             <source>GEOM_MIRROR</source>
 893             <translation>Mirror</translation>
 894         </message>
 895         <message>
 896             <source>GEOM_MIRROR_TITLE</source>
 897             <translation>Mirror An Object</translation>
 898         </message>
 899         <message>
 900             <source>GEOM_MULTIROTATION</source>
 901             <translation>Multi-Rotation</translation>
 902         </message>
 903         <message>
 904             <source>GEOM_MULTIROTATION_DOUBLE</source>
 905             <translation>Multi Rotation Double</translation>
 906         </message>
 907         <message>
 908             <source>GEOM_MULTIROTATION_SIMPLE</source>
 909             <translation>Multi Rotation Simple</translation>
 910         </message>
 911         <message>
 912             <source>GEOM_MULTIROTATION_TITLE</source>
 913             <translation>Multi-Rotation</translation>
 914         </message>
 915         <message>
 916             <source>GEOM_MULTITRANSLATION</source>
 917             <translation>Multi-Translation</translation>
 918         </message>
 919         <message>
 920             <source>GEOM_MULTITRANSLATION_DOUBLE</source>
 921             <translation>Multi Translation Double</translation>
 922         </message>
 923         <message>
 924             <source>GEOM_MULTITRANSLATION_SIMPLE</source>
 925             <translation>Multi Translation Simple</translation>
 926         </message>
 927         <message>
 928             <source>GEOM_MULTITRANSLATION_TITLE</source>
 929             <translation>Multi-Translation</translation>
 930         </message>
 931         <message>
 932             <source>GEOM_NAME_INCORRECT</source>
 933             <translation>Object name not found</translation>
 934         </message>
 935         <message>
 936             <source>GEOM_NB_BLOCKS_NO_OTHERS</source>
 937             <translation>There are %1 specified blocks and NO other solids</translation>
 938         </message>
 939         <message>
 940             <source>GEOM_NB_BLOCKS_SOME_OTHERS</source>
 941             <translation>There are %1 specified blocks and some other solids</translation>
 942         </message>
 943         <message>
 944             <source>GEOM_NB_TIMES</source>
 945             <translation>Nb. Times :</translation>
 946         </message>
 947         <message>
 948             <source>GEOM_NB_TIMES_U</source>
 949             <translation>Nb. Times U :</translation>
 950         </message>
 951         <message>
 952             <source>GEOM_NB_TIMES_V</source>
 953             <translation>Nb. Times V :</translation>
 954         </message>
 955         <message>
 956             <source>GEOM_NODES</source>
 957             <translation>Nodes</translation>
 958         </message>
 959         <message>
 960             <source>GEOM_NUM_SPLIT_POINTS</source>
 961             <translation>Number of splitting points</translation>
 962         </message>
 963         <message>
 964             <source>GEOM_OBJECT</source>
 965             <translation>Object</translation>
 966         </message>
 967         <message>
 968             <source>GEOM_OBJECT_TYPE</source>
 969             <translation>Object Type</translation>
 970         </message>
 971         <message>
 972             <source>GEOM_OBJECTS</source>
 973             <translation>Objects</translation>
 974         </message>
 975         <message>
 976             <source>GEOM_OBJECT_I</source>
 977             <translation>Object %1</translation>
 978         </message>
 979         <message>
 980             <source>GEOM_OBJECT_RESULT</source>
 981             <translation>Object And Result</translation>
 982         </message>
 983         <message>
 984             <source>GEOM_OFFSET</source>
 985             <translation>Offset</translation>
 986         </message>
 987         <message>
 988             <source>GEOM_OFFSET_TITLE</source>
 989             <translation>Offset Surface</translation>
 990         </message>
 991         <message>
 992             <source>GEOM_OPERATIONS</source>
 993             <translation>Operations</translation>
 994         </message>
 995         <message>
 996             <source>GEOM_ORIENTATION</source>
 997             <translation>Orientation</translation>
 998         </message>
 999         <message>
1000             <source>GEOM_ORIENTATION_OPT</source>
1001             <translation>Reverse orientation with normal vectors simulation</translation>
1002         </message>
1003         <message>
1004             <source>GEOM_ORIENTATION_TITLE</source>
1005             <translation>Change Orientation</translation>
1006         </message>
1007         <message>
1008             <source>GEOM_PARAMETER</source>
1009             <translation>Parameter :</translation>
1010         </message>
1011         <message>
1012             <source>GEOM_PARAMETERS</source>
1013             <translation>Parameters</translation>
1014         </message>
1015         <message>
1016             <source>GEOM_PARAM_POINT</source>
1017             <translation>Parametric point</translation>
1018         </message>
1019         <message>
1020             <source>GEOM_PARTITION</source>
1021             <translation>Partition</translation>
1022         </message>
1023         <message>
1024             <source>GEOM_PARTITION_HALFSPACE</source>
1025             <translation>Half-space partition</translation>
1026         </message>
1027         <message>
1028             <source>GEOM_PARTITION_ORIENTATION</source>
1029             <translation>Change Orientation</translation>
1030         </message>
1031         <message>
1032             <source>GEOM_PARTITION_TITLE</source>
1033             <translation>Partition Of Object With Tool</translation>
1034         </message>
1035         <message>
1036             <source>GEOM_PATH_OBJECT</source>
1037             <translation>Path Object</translation>
1038         </message>
1039         <message>
1040             <source>GEOM_PIPE</source>
1041             <translation>Pipe</translation>
1042         </message>
1043         <message>
1044             <source>GEOM_PIPE_TITLE</source>
1045             <translation>Pipe Construction</translation>
1046         </message>
1047         <message>
1048             <source>GEOM_PLANE</source>
1049             <translation>Plane</translation>
1050         </message>
1051         <message>
1052             <source>GEOM_PLANE_MIRROR</source>
1053             <translation>Plane Mirror</translation>
1054         </message>
1055         <message>
1056             <source>GEOM_PLANE_PV</source>
1057             <translation>Point + Vector</translation>
1058         </message>
1059         <message>
1060             <source>GEOM_PLANE_PVC</source>
1061             <translation>Point + Coordinate Vector</translation>
1062         </message>
1063         <message>
1064             <source>GEOM_PLANE_SIZE</source>
1065             <translation>Size of plane :</translation>
1066         </message>
1067         <message>
1068             <source>GEOM_PLANE_TITLE</source>
1069             <translation>Plane Construction</translation>
1070         </message>
1071         <message>
1072             <source>GEOM_POINT</source>
1073             <translation>Point</translation>
1074         </message>
1075         <message>
1076             <source>GEOM_POINT1</source>
1077             <translation>Point 1</translation>
1078         </message>
1079         <message>
1080             <source>GEOM_POINT2</source>
1081             <translation>Point 2</translation>
1082         </message>
1083         <message>
1084             <source>GEOM_POINT3</source>
1085             <translation>Point 3</translation>
1086         </message>
1087         <message>
1088             <source>GEOM_POINTS</source>
1089             <translation>Points</translation>
1090         </message>
1091         <message>
1092             <source>GEOM_POINT_I</source>
1093             <translation>Point %1</translation>
1094         </message>
1095         <message>
1096             <source>GEOM_POINT_MIRROR</source>
1097             <translation>Point Mirror</translation>
1098         </message>
1099         <message>
1100             <source>GEOM_POINT_TITLE</source>
1101             <translation>Point Construction</translation>
1102         </message>
1103         <message>
1104             <source>GEOM_POLYLINE</source>
1105             <translation>Polyline</translation>
1106         </message>
1107         <message>
1108             <source>GEOM_POSITION</source>
1109             <translation>Location</translation>
1110         </message>
1111         <message>
1112             <source>GEOM_POSITION_TITLE</source>
1113             <translation>Modify the Location of an Object</translation>
1114         </message>
1115         <message>
1116             <source>GEOM_PRECISION</source>
1117             <translation>Precision :</translation>
1118         </message>
1119         <message>
1120             <source>GEOM_PROPAGATE</source>
1121             <translation>Propagate</translation>
1122         </message>
1123         <message>
1124             <source>GEOM_PROPAGATE_TITLE</source>
1125             <translation>Propagate</translation>
1126         </message>
1127         <message>
1128             <source>GEOM_PROPERTIES</source>
1129             <translation>Basic Properties</translation>
1130         </message>
1131         <message>
1132             <source>GEOM_PROPERTIES_CONSTR</source>
1133             <translation>Object And Its Properties</translation>
1134         </message>
1135         <message>
1136             <source>GEOM_PROPERTIES_SURFACE</source>
1137             <translation>Surface is :</translation>
1138         </message>
1139         <message>
1140             <source>GEOM_PROPERTIES_TITLE</source>
1141             <translation>Basic Properties Informations</translation>
1142         </message>
1143         <message>
1144             <source>GEOM_PROPERTIES_VOLUME</source>
1145             <translation>Volume is :</translation>
1146         </message>
1147         <message>
1148             <source>GEOM_PRP_ABORT</source>
1149             <translation>Operation aborted</translation>
1150         </message>
1151         <message>
1152             <source>GEOM_PRP_COMMAND</source>
1153             <translation>No command associated with this id = %1.</translation>
1154         </message>
1155         <message>
1156             <source>GEOM_PRP_DONE</source>
1157             <translation>Operation done</translation>
1158         </message>
1159         <message>
1160             <source>GEOM_PRP_EXPORT</source>
1161             <translation>Exporting geometry to %1 ...</translation>
1162         </message>
1163         <message>
1164             <source>GEOM_PRP_LOADING</source>
1165             <translation>Loading %1 ...</translation>
1166         </message>
1167         <message>
1168             <source>GEOM_PRP_MIN_DIST</source>
1169             <translation>Min Distance not computed</translation>
1170         </message>
1171         <message>
1172             <source>GEOM_PRP_NOT_FOR_VTK_VIEWER</source>
1173             <translation>Not allowed in VTK viewer</translation>
1174         </message>
1175         <message>
1176             <source>GEOM_PRP_NULLSHAPE</source>
1177             <translation>Error, null or inappropriate shape !</translation>
1178         </message>
1179         <message>
1180             <source>GEOM_PRP_READY</source>
1181             <translation>Ready</translation>
1182         </message>
1183         <message>
1184             <source>GEOM_PRP_SELECT_EDGE</source>
1185             <translation>Select edges and click on Apply</translation>
1186         </message>
1187         <message>
1188             <source>GEOM_PRP_SELECT_FACE</source>
1189             <translation>Select faces to suppress and click on Ok/Apply</translation>
1190         </message>
1191         <message>
1192             <source>GEOM_PRP_SELECT_FIRST</source>
1193             <translation>Select main shape first</translation>
1194         </message>
1195         <message>
1196             <source>GEOM_PRP_SELECT_SUBSHAPES</source>
1197             <translation>Select Sub Shapes</translation>
1198         </message>
1199         <message>
1200             <source>GEOM_PRP_SHAPE_IN_STUDY</source>
1201             <translation>Main shape must be in the study before</translation>
1202         </message>
1203         <message>
1204             <source>GEOM_QUAD_FACE</source>
1205             <translation>Quadrangle Face</translation>
1206         </message>
1207         <message>
1208             <source>GEOM_QUAD_FACE_TITLE</source>
1209             <translation>Quadrangle Face Construction</translation>
1210         </message>
1211         <message>
1212             <source>GEOM_RADIUS</source>
1213             <translation>Radius :</translation>
1214         </message>
1215         <message>
1216             <source>GEOM_RADIUS_I</source>
1217             <translation>Radius %1 :</translation>
1218         </message>
1219         <message>
1220             <source>GEOM_RADIUS_MAJOR</source>
1221             <translation>Major radius :</translation>
1222         </message>
1223         <message>
1224             <source>GEOM_RADIUS_MINOR</source>
1225             <translation>Minor radius :</translation>
1226         </message>
1227         <message>
1228             <source>GEOM_RECONSTRUCTION_LIMIT</source>
1229             <translation>Resulting Type</translation>
1230         </message>
1231         <message>
1232             <source>GEOM_RECONSTRUCTION_LIMIT_EDGE</source>
1233             <translation>Edge</translation>
1234         </message>
1235         <message>
1236             <source>GEOM_RECONSTRUCTION_LIMIT_FACE</source>
1237             <translation>Face</translation>
1238         </message>
1239         <message>
1240             <source>GEOM_RECONSTRUCTION_LIMIT_SHAPE</source>
1241             <translation>Shape</translation>
1242         </message>
1243         <message>
1244             <source>GEOM_RECONSTRUCTION_LIMIT_SHELL</source>
1245             <translation>Shell</translation>
1246         </message>
1247         <message>
1248             <source>GEOM_RECONSTRUCTION_LIMIT_SOLID</source>
1249             <translation>Solid</translation>
1250         </message>
1251         <message>
1252             <source>GEOM_RECONSTRUCTION_LIMIT_VERTEX</source>
1253             <translation>Vertex</translation>
1254         </message>
1255         <message>
1256             <source>GEOM_RECONSTRUCTION_LIMIT_WIRE</source>
1257             <translation>Wire</translation>
1258         </message>
1259         <message>
1260             <source>GEOM_REF_POINT</source>
1261             <translation>Point with reference</translation>
1262         </message>
1263         <message>
1264             <source>GEOM_REMOVE_ALL_HOLES</source>
1265             <translation>Remove all holes</translation>
1266         </message>
1267         <message>
1268             <source>GEOM_REMOVE_ALL_INT_WIRES</source>
1269             <translation>Remove all internal wires</translation>
1270         </message>
1271         <message>
1272             <source>GEOM_REMOVE_HOLES_TITLE</source>
1273             <translation>Suppress holes</translation>
1274         </message>
1275         <message>
1276             <source>GEOM_REMOVE_INTERNAL_WIRES_TITLE</source>
1277             <translation>Suppress internal wires</translation>
1278         </message>
1279         <message>
1280             <source>GEOM_REMOVE_WEBS</source>
1281             <translation>Remove webs</translation>
1282         </message>
1283         <message>
1284             <source>GEOM_REQUIRED_DEGREE</source>
1285             <translation>Required degree</translation>
1286         </message>
1287         <message>
1288             <source>GEOM_REQUIRED_NUM_SEGMENTS</source>
1289             <translation>Required number of segments</translation>
1290         </message>
1291         <message>
1292             <source>GEOM_REVERSE</source>
1293             <translation>Reverse</translation>
1294         </message>
1295         <message>
1296             <source>GEOM_REVERSE_PLANE</source>
1297             <translation>Reverse the plane normal</translation>
1298         </message>
1299         <message>
1300             <source>GEOM_REVERSE_U</source>
1301             <translation>Reverse U</translation>
1302         </message>
1303         <message>
1304             <source>GEOM_REVERSE_V</source>
1305             <translation>Reverse V</translation>
1306         </message>
1307         <message>
1308             <source>GEOM_REVERSE_VECTOR</source>
1309             <translation>Reverse Vector</translation>
1310         </message>
1311         <message>
1312             <source>GEOM_REVOLUTION</source>
1313             <translation>Revolution</translation>
1314         </message>
1315         <message>
1316             <source>GEOM_REVOLUTION_TITLE</source>
1317             <translation>Construction By Revolution</translation>
1318         </message>
1319         <message>
1320             <source>GEOM_ROTATION</source>
1321             <translation>Rotation</translation>
1322         </message>
1323         <message>
1324             <source>GEOM_ROTATION_TITLE</source>
1325             <translation>Rotation Of An Object</translation>
1326         </message>
1327         <message>
1328             <source>GEOM_SCALE</source>
1329             <translation>Scale</translation>
1330         </message>
1331         <message>
1332             <source>GEOM_SCALE_FACTOR</source>
1333             <translation>Scale Factor :</translation>
1334         </message>
1335         <message>
1336             <source>GEOM_SCALE_TITLE</source>
1337             <translation>Scale An Object</translation>
1338         </message>
1339         <message>
1340             <source>GEOM_SECTION</source>
1341             <translation>Section</translation>
1342         </message>
1343         <message>
1344             <source>GEOM_SECTION_TITLE</source>
1345             <translation>BOOLEAN : Section Of Two Objects</translation>
1346         </message>
1347         <message>
1348             <source>GEOM_SELECTED_FACE</source>
1349             <translation>Selected face</translation>
1350         </message>
1351         <message>
1352             <source>GEOM_SELECTED_OBJECTS</source>
1353             <translation>Selected objects</translation>
1354         </message>
1355         <message>
1356             <source>GEOM_SELECTED_SHAPE</source>
1357             <translation>Selected shape</translation>
1358         </message>
1359         <message>
1360             <source>GEOM_SELECTION</source>
1361             <translation>Selection</translation>
1362         </message>
1363         <message>
1364             <source>GEOM_SET_MATERIALS</source>
1365             <translation>Set materials</translation>
1366         </message>
1367         <message>
1368             <source>GEOM_SEWING</source>
1369             <translation>Sewing</translation>
1370         </message>
1371         <message>
1372             <source>GEOM_SEWING_TITLE</source>
1373             <translation>Topological sewing</translation>
1374         </message>
1375         <message>
1376             <source>GEOM_SHAPE</source>
1377             <translation>Shape</translation>
1378         </message>
1379         <message>
1380             <source>GEOM_SHAPEPROCESS_TITLE</source>
1381             <translation>Shape Processing</translation>
1382         </message>
1383         <message>
1384             <source>GEOM_SHAPES</source>
1385             <translation>Shapes</translation>
1386         </message>
1387         <message>
1388             <source>GEOM_SHELL</source>
1389             <translation>Shell</translation>
1390         </message>
1391         <message>
1392             <source>GEOM_SHELLS</source>
1393             <translation>Shells</translation>
1394         </message>
1395         <message>
1396             <source>GEOM_SHELL_TITLE</source>
1397             <translation>Shell Construction</translation>
1398         </message>
1399         <message>
1400             <source>GEOM_SKETCHER_ABS</source>
1401             <translation>Absolute</translation>
1402         </message>
1403         <message>
1404             <source>GEOM_SKETCHER_ANGLE</source>
1405             <translation>Angle</translation>
1406         </message>
1407         <message>
1408             <source>GEOM_SKETCHER_ANGLE2</source>
1409             <translation>Angle :</translation>
1410         </message>
1411         <message>
1412             <source>GEOM_SKETCHER_APPLY</source>
1413             <translation>Apply</translation>
1414         </message>
1415         <message>
1416             <source>GEOM_SKETCHER_ARC</source>
1417             <translation>Arc</translation>
1418         </message>
1419         <message>
1420             <source>GEOM_SKETCHER_DEST</source>
1421             <translation>Destination</translation>
1422         </message>
1423         <message>
1424             <source>GEOM_SKETCHER_DIR</source>
1425             <translation>Direction</translation>
1426         </message>
1427         <message>
1428             <source>GEOM_SKETCHER_DX2</source>
1429             <translation>DX :</translation>
1430         </message>
1431         <message>
1432             <source>GEOM_SKETCHER_DY2</source>
1433             <translation>DY :</translation>
1434         </message>
1435         <message>
1436             <source>GEOM_SKETCHER_EL</source>
1437             <translation>Element Type</translation>
1438         </message>
1439         <message>
1440             <source>GEOM_SKETCHER_LENGTH</source>
1441             <translation>Length</translation>
1442         </message>
1443         <message>
1444             <source>GEOM_SKETCHER_LENGTH2</source>
1445             <translation>Length :</translation>
1446         </message>
1447         <message>
1448             <source>GEOM_SKETCHER_PER</source>
1449             <translation>Perpendicular</translation>
1450         </message>
1451         <message>
1452             <source>GEOM_SKETCHER_POINT</source>
1453             <translation>Point</translation>
1454         </message>
1455         <message>
1456             <source>GEOM_SKETCHER_POINT2</source>
1457             <translation>Point :</translation>
1458         </message>
1459         <message>
1460             <source>GEOM_SKETCHER_RADIUS2</source>
1461             <translation>Radius :</translation>
1462         </message>
1463         <message>
1464             <source>GEOM_SKETCHER_REL</source>
1465             <translation>Relative</translation>
1466         </message>
1467         <message>
1468             <source>GEOM_SKETCHER_SEGMENT</source>
1469             <translation>Segment</translation>
1470         </message>
1471         <message>
1472             <source>GEOM_SKETCHER_SEL</source>
1473             <translation>Selection</translation>
1474         </message>
1475         <message>
1476             <source>GEOM_SKETCHER_TAN</source>
1477             <translation>Tangent</translation>
1478         </message>
1479         <message>
1480             <source>GEOM_SKETCHER_TITLE</source>
1481             <translation>Sketch Construction</translation>
1482         </message>
1483         <message>
1484             <source>GEOM_SKETCHER_TYPE</source>
1485             <translation>Type</translation>
1486         </message>
1487         <message>
1488             <source>GEOM_SKETCHER_UNDO</source>
1489             <translation>Undo</translation>
1490         </message>
1491         <message>
1492             <source>GEOM_SKETCHER_VALUES</source>
1493             <translation>Values</translation>
1494         </message>
1495         <message>
1496             <source>GEOM_SKETCHER_VX2</source>
1497             <translation>VX :</translation>
1498         </message>
1499         <message>
1500             <source>GEOM_SKETCHER_VXVY</source>
1501             <translation>VX-VY</translation>
1502         </message>
1503         <message>
1504             <source>GEOM_SKETCHER_VY2</source>
1505             <translation>VY :</translation>
1506         </message>
1507         <message>
1508             <source>GEOM_SKETCHER_X</source>
1509             <translation>X</translation>
1510         </message>
1511         <message>
1512             <source>GEOM_SKETCHER_X2</source>
1513             <translation>X :</translation>
1514         </message>
1515         <message>
1516             <source>GEOM_SKETCHER_X3</source>
1517             <translation>Abs. X :</translation>
1518         </message>
1519         <message>
1520             <source>GEOM_SKETCHER_Y</source>
1521             <translation>Y</translation>
1522         </message>
1523         <message>
1524             <source>GEOM_SKETCHER_Y2</source>
1525             <translation>Y :</translation>
1526         </message>
1527         <message>
1528             <source>GEOM_SKETCHER_Y3</source>
1529             <translation>Abs. Y :</translation>
1530         </message>
1531         <message>
1532             <source>GEOM_SOLID</source>
1533             <translation>Solid</translation>
1534         </message>
1535         <message>
1536             <source>GEOM_SOLID_TITLE</source>
1537             <translation>Solid Construction</translation>
1538         </message>
1539         <message>
1540             <source>GEOM_SPHERE</source>
1541             <translation>Sphere</translation>
1542         </message>
1543         <message>
1544             <source>GEOM_SPHERE_CR</source>
1545             <translation>Center + Radius</translation>
1546         </message>
1547         <message>
1548             <source>GEOM_SPHERE_RO</source>
1549             <translation>Radius At Origin</translation>
1550         </message>
1551         <message>
1552             <source>GEOM_SPHERE_TITLE</source>
1553             <translation>Sphere Construction</translation>
1554         </message>
1555         <message>
1556             <source>GEOM_SPLINE</source>
1557             <translation>Spline</translation>
1558         </message>
1559         <message>
1560             <source>GEOM_SPLINE_TITLE</source>
1561             <translation>Spline Construction</translation>
1562         </message>
1563         <message>
1564             <source>GEOM_START_LCS</source>
1565             <translation>Start LCS</translation>
1566         </message>
1567         <message>
1568             <source>SELECT_UNPUBLISHED_EDGES</source>
1569             <translation>Select unpublished edges</translation>
1570         </message>
1571         <message>
1572             <source>GEOM_STEP</source>
1573             <translation>Step :</translation>
1574         </message>
1575         <message>
1576             <source>GEOM_STEP_TITLE</source>
1577             <translation>Step value for GUI constructions</translation>
1578         </message>
1579         <message>
1580             <source>GEOM_STEP_U</source>
1581             <translation>Step U :</translation>
1582         </message>
1583         <message>
1584             <source>GEOM_STEP_V</source>
1585             <translation>Step V :</translation>
1586         </message>
1587         <message>
1588             <source>GEOM_STUDY_LOCKED</source>
1589             <translation>The active study is locked and therefore cannot be modified</translation>
1590         </message>
1591         <message>
1592             <source>GEOM_SUBSHAPE_SELECT</source>
1593             <translation>Select Sub Shapes</translation>
1594         </message>
1595         <message>
1596             <source>GEOM_SUBSHAPE_TITLE</source>
1597             <translation>Sub Shapes Selection</translation>
1598         </message>
1599         <message>
1600             <source>GEOM_SUBSHAPE_TYPE</source>
1601             <translation>Sub Shapes Type :</translation>
1602         </message>
1603         <message>
1604             <source>GEOM_SUB_SHAPE</source>
1605             <translation>Sub Shapes</translation>
1606         </message>
1607         <message>
1608             <source>GEOM_SUPPRESSHOLE_FACE_SHELL</source>
1609             <translation>Face or shell</translation>
1610         </message>
1611         <message>
1612             <source>GEOM_SUPPRESSHOLE_SELECTFACE</source>
1613             <translation>Select the face with hole</translation>
1614         </message>
1615         <message>
1616             <source>GEOM_SUPPRESSHOLE_SELECTFACE_END</source>
1617             <translation>Select end face (if hole traversing)</translation>
1618         </message>
1619         <message>
1620             <source>GEOM_SUPPRESSHOLE_SELECTWIRE</source>
1621             <translation>Select wire on face</translation>
1622         </message>
1623         <message>
1624             <source>GEOM_SUPPRESSHOLE_SELECTWIRE_END</source>
1625             <translation>Select end wire (if hole traversing)</translation>
1626         </message>
1627         <message>
1628             <source>GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE</source>
1629             <translation>Select hole(s) on the face</translation>
1630         </message>
1631         <message>
1632             <source>GEOM_SUPPRESSHOLE_TITLE</source>
1633             <translation>Suppress holes</translation>
1634         </message>
1635         <message>
1636             <source>GEOM_SUPPRESS_RESULT</source>
1637             <translation>Suppress Result</translation>
1638         </message>
1639         <message>
1640             <source>GEOM_SUPPRESS_RESULT_INSIDE</source>
1641             <translation>Inside</translation>
1642         </message>
1643         <message>
1644             <source>GEOM_SUPPRESS_RESULT_OUTSIDE</source>
1645             <translation>Outside</translation>
1646         </message>
1647         <message>
1648             <source>GEOM_SUPRESSFACE</source>
1649             <translation>Supress Face</translation>
1650         </message>
1651         <message>
1652             <source>GEOM_SUPRESSFACE_SELECT</source>
1653             <translation>Select Faces To Suppress</translation>
1654         </message>
1655         <message>
1656             <source>GEOM_SUPRESSFACE_TITLE</source>
1657             <translation>Suppress Faces In An Object</translation>
1658         </message>
1659         <message>
1660             <source>GEOM_SURFACE_CONTINUTY</source>
1661             <translation>Surface continuity</translation>
1662         </message>
1663         <message>
1664             <source>GEOM_SURFACE_MODE</source>
1665             <translation>Surface mode</translation>
1666         </message>
1667         <message>
1668             <source>GEOM_SURFCONE</source>
1669             <translation>Conical Face</translation>
1670         </message>
1671         <message>
1672             <source>GEOM_SURFCYLINDER</source>
1673             <translation>Cylindrical Face</translation>
1674         </message>
1675         <message>
1676             <source>GEOM_SURFSPHERE</source>
1677             <translation>Spherical Face</translation>
1678         </message>
1679         <message>
1680             <source>GEOM_SURFTORUS</source>
1681             <translation>Toroidal Face</translation>
1682         </message>
1683         <message>
1684             <source>GEOM_SameParameter</source>
1685             <translation>SameParameter</translation>
1686         </message>
1687         <message>
1688             <source>GEOM_SplitAngle</source>
1689             <translation>SplitAngle</translation>
1690         </message>
1691         <message>
1692             <source>GEOM_SplitClosedFaces</source>
1693             <translation>SplitClosedFaces</translation>
1694         </message>
1695         <message>
1696             <source>GEOM_SplitContinuity</source>
1697             <translation>SplitContinuity</translation>
1698         </message>
1699         <message>
1700             <source>GEOM_TOLERANCE</source>
1701             <translation>Tolerance</translation>
1702         </message>
1703         <message>
1704             <source>GEOM_TOLERANCE_CONSTR</source>
1705             <translation>Object And Its Tolerances</translation>
1706         </message>
1707         <message>
1708             <source>GEOM_TOLERANCE_EDGE</source>
1709             <translation>Edge :</translation>
1710         </message>
1711         <message>
1712             <source>GEOM_TOLERANCE_FACE</source>
1713             <translation>Face :</translation>
1714         </message>
1715         <message>
1716             <source>GEOM_TOLERANCE_TITLE</source>
1717             <translation>Maximum Tolerance</translation>
1718         </message>
1719         <message>
1720             <source>GEOM_TOLERANCE_VERTEX</source>
1721             <translation>Vertex :</translation>
1722         </message>
1723         <message>
1724             <source>GEOM_TOOL_OBJECT</source>
1725             <translation>Tool Object</translation>
1726         </message>
1727         <message>
1728             <source>GEOM_TORUS</source>
1729             <translation>Torus</translation>
1730         </message>
1731         <message>
1732             <source>GEOM_TORUS_TITLE</source>
1733             <translation>Torus Construction</translation>
1734         </message>
1735         <message>
1736             <source>GEOM_TRANSLATION</source>
1737             <translation>Translation</translation>
1738         </message>
1739         <message>
1740             <source>GEOM_TRANSLATION_COOR</source>
1741             <translation>Translation With Coordinates</translation>
1742         </message>
1743         <message>
1744             <source>GEOM_TRANSLATION_TITLE</source>
1745             <translation>Translation Of An Object</translation>
1746         </message>
1747         <message>
1748             <source>GEOM_TRANSPARENCY_OPAQUE</source>
1749             <translation>Opaque</translation>
1750         </message>
1751         <message>
1752             <source>GEOM_TRANSPARENCY_TITLE</source>
1753             <translation>Transparency</translation>
1754         </message>
1755         <message>
1756             <source>GEOM_TRANSPARENCY_TRANSPARENT</source>
1757             <translation>Transparent</translation>
1758         </message>
1759         <message>
1760             <source>GEOM_TRIHEDRON</source>
1761             <translation>Trihedron</translation>
1762         </message>
1763         <message>
1764             <source>GEOM_ToBezier</source>
1765             <translation>ToBezier</translation>
1766         </message>
1767         <message>
1768             <source>GEOM_VALUE</source>
1769             <translation>Value</translation>
1770         </message>
1771         <message>
1772             <source>GEOM_VECTOR</source>
1773             <translation>Vector</translation>
1774         </message>
1775         <message>
1776             <source>GEOM_VECTOR_LENGTH</source>
1777             <translation>Vector Length :</translation>
1778         </message>
1779         <message>
1780             <source>GEOM_VECTOR_TITLE</source>
1781             <translation>Vector Construction</translation>
1782         </message>
1783         <message>
1784             <source>GEOM_VECTOR_U</source>
1785             <translation>Vector U</translation>
1786         </message>
1787         <message>
1788             <source>GEOM_VECTOR_V</source>
1789             <translation>Vector V</translation>
1790         </message>
1791         <message>
1792             <source>GEOM_VERTEX</source>
1793             <translation>Vertex</translation>
1794         </message>
1795         <message>
1796             <source>GEOM_WATER_DENSITY</source>
1797             <translation>Water Density :</translation>
1798         </message>
1799         <message>
1800             <source>GEOM_WEIGHT</source>
1801             <translation>Weight :</translation>
1802         </message>
1803         <message>
1804             <source>GEOM_WIDTH</source>
1805             <translation>Width :</translation>
1806         </message>
1807         <message>
1808             <source>GEOM_WHATIS</source>
1809             <translation>Whatis</translation>
1810         </message>
1811         <message>
1812             <source>GEOM_WHATIS_OBJECT</source>
1813             <translation>Object And Its Topological Informations</translation>
1814         </message>
1815         <message>
1816             <source>GEOM_WHATIS_TITLE</source>
1817             <translation>Whatis Informations</translation>
1818         </message>
1819         <message>
1820             <source>GEOM_WIRE</source>
1821             <translation>Wire</translation>
1822         </message>
1823         <message>
1824             <source>GEOM_WIRES</source>
1825             <translation>Wire(s)</translation>
1826         </message>
1827         <message>
1828             <source>GEOM_WIRES_TO_REMOVE</source>
1829             <translation>Wires to remove</translation>
1830         </message>
1831         <message>
1832             <source>GEOM_WIREZ</source>
1833             <translation>Wires</translation>
1834         </message>
1835         <message>
1836             <source>GEOM_WIRE_CONNECT</source>
1837             <translation>Wire creation from wires/edges connected</translation>
1838         </message>
1839         <message>
1840             <source>GEOM_WIRE_TITLE</source>
1841             <translation>Create A Wire</translation>
1842         </message>
1843         <message>
1844             <source>GEOM_WPLANE</source>
1845             <translation>Working Plane</translation>
1846         </message>
1847         <message>
1848             <source>GEOM_WPLANE_FACE</source>
1849             <translation>Plane, Planar Face or LCS</translation>
1850         </message>
1851         <message>
1852             <source>GEOM_WPLANE_ORIGIN</source>
1853             <translation>Select a plane</translation>
1854         </message>
1855         <message>
1856             <source>GEOM_WPLANE_OXY</source>
1857             <translation>OXY</translation>
1858         </message>
1859         <message>
1860             <source>GEOM_WPLANE_OYZ</source>
1861             <translation>OYZ</translation>
1862         </message>
1863         <message>
1864             <source>GEOM_WPLANE_OZX</source>
1865             <translation>OZX</translation>
1866         </message>
1867         <message>
1868             <source>GEOM_WPLANE_TITLE</source>
1869             <translation>Working Plane Selection</translation>
1870         </message>
1871         <message>
1872             <source>GEOM_WPLANE_VECTOR</source>
1873             <translation>Select 2 vectors</translation>
1874         </message>
1875         <message>
1876             <source>GEOM_WPLANE_VX</source>
1877             <translation>Vector X</translation>
1878         </message>
1879         <message>
1880             <source>GEOM_WPLANE_VZ</source>
1881             <translation>Vector Z</translation>
1882         </message>
1883         <message>
1884             <source>GEOM_WRN_RADIUS_NULL</source>
1885             <translation>Radius is null</translation>
1886         </message>
1887         <message>
1888             <source>GEOM_WRN_WARNING</source>
1889             <translation>Warning</translation>
1890         </message>
1891         <message>
1892             <source>WRN_SHAPE_UNCLOSED</source>
1893             <translation>Unable to create solid from unclosed shape %1</translation>
1894         </message>
1895         <message>
1896             <source>GEOM_X</source>
1897             <translation>X :</translation>
1898         </message>
1899         <message>
1900             <source>GEOM_Y</source>
1901             <translation>Y :</translation>
1902         </message>
1903         <message>
1904             <source>GEOM_Z</source>
1905             <translation>Z :</translation>
1906         </message>
1907         <message>
1908             <source>GLUE_NEW_OBJ_NAME</source>
1909             <translation>Glue</translation>
1910         </message>
1911         <message>
1912             <source>MEN_ALL_SEL_ONLY</source>
1913             <translation>Select All</translation>
1914         </message>
1915         <message>
1916             <source>MEN_ARC</source>
1917             <translation>Arc</translation>
1918         </message>
1919         <message>
1920             <source>MEN_ARCHIMEDE</source>
1921             <translation>Archimede</translation>
1922         </message>
1923         <message>
1924             <source>MEN_BASIC</source>
1925             <translation>Basic</translation>
1926         </message>
1927         <message>
1928             <source>MEN_BASIC_PROPS</source>
1929             <translation>Basic properties</translation>
1930         </message>
1931         <message>
1932             <source>MEN_BLOCKS</source>
1933             <translation>Blocks</translation>
1934         </message>
1935         <message>
1936             <source>MEN_BND_BOX</source>
1937             <translation>Bounding box</translation>
1938         </message>
1939         <message>
1940             <source>MEN_BOOLEAN</source>
1941             <translation>Boolean</translation>
1942         </message>
1943         <message>
1944             <source>MEN_BOX</source>
1945             <translation>Box</translation>
1946         </message>
1947         <message>
1948             <source>MEN_BUILD</source>
1949             <translation>Build</translation>
1950         </message>
1951         <message>
1952             <source>MEN_CHAMFER</source>
1953             <translation>Chamfer</translation>
1954         </message>
1955         <message>
1956             <source>MEN_CHANGE_ORIENTATION</source>
1957             <translation>Change orientation</translation>
1958         </message>
1959         <message>
1960             <source>MEN_CHECK</source>
1961             <translation>Check</translation>
1962         </message>
1963         <message>
1964             <source>MEN_CHECK_COMPOUND</source>
1965             <translation>Check compound of blocks</translation>
1966         </message>
1967         <message>
1968             <source>MEN_CHECK_FREE_BNDS</source>
1969             <translation>Check free boundaries</translation>
1970         </message>
1971         <message>
1972             <source>MEN_CHECK_FREE_FACES</source>
1973             <translation>Check free faces</translation>
1974         </message>
1975         <message>
1976             <source>MEN_CHECK_GEOMETRY</source>
1977             <translation>Check Geometry</translation>
1978         </message>
1979         <message>
1980             <source>MEN_CIRCLE</source>
1981             <translation>Circle</translation>
1982         </message>
1983         <message>
1984             <source>MEN_CLIPPING</source>
1985             <translation>Clipping range</translation>
1986         </message>
1987         <message>
1988             <source>MEN_CLOSE_CONTOUR</source>
1989             <translation>Close contour</translation>
1990         </message>
1991         <message>
1992             <source>MEN_COMMON</source>
1993             <translation>Common</translation>
1994         </message>
1995         <message>
1996             <source>MEN_COMPOUND</source>
1997             <translation>Compound</translation>
1998         </message>
1999         <message>
2000             <source>MEN_COMPOUND_SEL_ONLY</source>
2001             <translation>Compound</translation>
2002         </message>
2003         <message>
2004             <source>MEN_CONE</source>
2005             <translation>Cone</translation>
2006         </message>
2007         <message>
2008             <source>MEN_CURVE</source>
2009             <translation>Curve</translation>
2010         </message>
2011         <message>
2012             <source>MEN_CUT</source>
2013             <translation>Cut</translation>
2014         </message>
2015         <message>
2016             <source>MEN_CYLINDER</source>
2017             <translation>Cylinder</translation>
2018         </message>
2019         <message>
2020             <source>MEN_DELETE</source>
2021             <translation>Delete</translation>
2022         </message>
2023         <message>
2024             <source>MEN_DIMENSIONS</source>
2025             <translation>Dimensions</translation>
2026         </message>
2027         <message>
2028             <source>MEN_DISPLAY</source>
2029             <translation>Show</translation>
2030         </message>
2031         <message>
2032             <source>MEN_DISK</source>
2033             <translation>Disk</translation>
2034         </message>
2035         <message>
2036             <source>MEN_DISPLAY_ALL</source>
2037             <translation>Show all</translation>
2038         </message>
2039         <message>
2040             <source>MEN_DISPLAY_MODE</source>
2041             <translation>Display mode</translation>
2042         </message>
2043         <message>
2044             <source>MEN_DISPLAY_ONLY</source>
2045             <translation>Show only</translation>
2046         </message>
2047         <message>
2048             <source>MEN_EDGE</source>
2049             <translation>Edge</translation>
2050         </message>
2051         <message>
2052             <source>MEN_EDGE_SEL_ONLY</source>
2053             <translation>Edge</translation>
2054         </message>
2055         <message>
2056             <source>MEN_EDIT</source>
2057             <translation>Edit</translation>
2058         </message>
2059         <message>
2060             <source>MEN_ELLIPSE</source>
2061             <translation>Ellipse</translation>
2062         </message>
2063         <message>
2064             <source>MEN_ERASE</source>
2065             <translation>Hide</translation>
2066         </message>
2067         <message>
2068             <source>MEN_ERASE_ALL</source>
2069             <translation>Hide all</translation>
2070         </message>
2071         <message>
2072             <source>MEN_EXPLODE</source>
2073             <translation>Explode</translation>
2074         </message>
2075         <message>
2076             <source>MEN_EXPLODE_BLOCKS</source>
2077             <translation>Explode on Blocks</translation>
2078         </message>
2079         <message>
2080             <source>MEN_EXPORT</source>
2081             <translation>Export...</translation>
2082         </message>
2083         <message>
2084             <source>MEN_EXTRUSION</source>
2085             <translation>Extrusion</translation>
2086         </message>
2087         <message>
2088             <source>MEN_FACE</source>
2089             <translation>Face</translation>
2090         </message>
2091         <message>
2092             <source>MEN_FACE_SEL_ONLY</source>
2093             <translation>Face</translation>
2094         </message>
2095         <message>
2096             <source>MEN_FILE</source>
2097             <translation>File</translation>
2098         </message>
2099         <message>
2100             <source>MEN_FILLET</source>
2101             <translation>Fillet</translation>
2102         </message>
2103         <message>
2104             <source>MEN_FILLING</source>
2105             <translation>Filling</translation>
2106         </message>
2107         <message>
2108             <source>MEN_FUSE</source>
2109             <translation>Fuse</translation>
2110         </message>
2111         <message>
2112             <source>MEN_GENERATION</source>
2113             <translation>Generation</translation>
2114         </message>
2115         <message>
2116             <source>MEN_GLUE_FACES</source>
2117             <translation>Glue faces</translation>
2118         </message>
2119         <message>
2120             <source>MEN_GROUP</source>
2121             <translation>Group</translation>
2122         </message>
2123         <message>
2124             <source>MEN_GROUP_CREATE</source>
2125             <translation>Create</translation>
2126         </message>
2127         <message>
2128             <source>MEN_GROUP_EDIT</source>
2129             <translation>Edit</translation>
2130         </message>
2131         <message>
2132             <source>MEN_RELOAD_IMPORTED</source>
2133             <translation>Reload From Disk</translation>
2134         </message>
2135         <message>
2136             <source>MEN_HEX_SOLID</source>
2137             <translation>Hexahedral Solid</translation>
2138         </message>
2139         <message>
2140             <source>MEN_IMPORT</source>
2141             <translation>Import...</translation>
2142         </message>
2143         <message>
2144             <source>MEN_INERTIA</source>
2145             <translation>Inertia</translation>
2146         </message>
2147         <message>
2148             <source>MEN_ISOS</source>
2149             <translation>Isos</translation>
2150         </message>
2151         <message>
2152             <source>MEN_LINE</source>
2153             <translation>Line</translation>
2154         </message>
2155         <message>
2156             <source>MEN_LOCAL_CS</source>
2157             <translation>Local coordinate system</translation>
2158         </message>
2159         <message>
2160             <source>MEN_MASS_CENTER</source>
2161             <translation>Center of mass</translation>
2162         </message>
2163         <message>
2164             <source>MEN_MEASURES</source>
2165             <translation>Measures</translation>
2166         </message>
2167         <message>
2168             <source>MEN_MIN_DIST</source>
2169             <translation>Min distance</translation>
2170         </message>
2171         <message>
2172             <source>MEN_MIRROR</source>
2173             <translation>Mirror image</translation>
2174         </message>
2175         <message>
2176             <source>MEN_MODIFY_LOCATION</source>
2177             <translation>Modify the Location</translation>
2178         </message>
2179         <message>
2180             <source>MEN_MUL_ROTATION</source>
2181             <translation>Multi-Rotation</translation>
2182         </message>
2183         <message>
2184             <source>MEN_MUL_TRANSFORM</source>
2185             <translation>Multi-transformation</translation>
2186         </message>
2187         <message>
2188             <source>MEN_MUL_TRANSLATION</source>
2189             <translation>Multi-Translation</translation>
2190         </message>
2191         <message>
2192             <source>MEN_NEW_ENTITY</source>
2193             <translation>New Entity</translation>
2194         </message>
2195         <message>
2196             <source>MEN_OFFSET</source>
2197             <translation>Offset surface</translation>
2198         </message>
2199         <message>
2200             <source>MEN_OPERATIONS</source>
2201             <translation>Operations</translation>
2202         </message>
2203         <message>
2204             <source>MEN_PARTITION</source>
2205             <translation>Partition</translation>
2206         </message>
2207         <message>
2208             <source>MEN_PIPE</source>
2209             <translation>Extrusion along a path</translation>
2210         </message>
2211         <message>
2212             <source>MEN_PLANE</source>
2213             <translation>Plane</translation>
2214         </message>
2215         <message>
2216             <source>MEN_POINT</source>
2217             <translation>Point</translation>
2218         </message>
2219         <message>
2220             <source>MEN_POINT_COORDS</source>
2221             <translation>Point coordinates</translation>
2222         </message>
2223         <message>
2224             <source>MEN_POINT_ON_EDGE</source>
2225             <translation>Add point on edge</translation>
2226         </message>
2227         <message>
2228             <source>MEN_POP_COLOR</source>
2229             <translation>Color</translation>
2230         </message>
2231         <message>
2232             <source>MEN_POP_CREATE_GROUP</source>
2233             <translation>Create Group</translation>
2234         </message>
2235         <message>
2236             <source>MEN_POP_ISOS</source>
2237             <translation>Isos</translation>
2238         </message>
2239         <message>
2240             <source>MEN_POP_RENAME</source>
2241             <translation>Rename</translation>
2242         </message>
2243         <message>
2244             <source>MEN_POP_SHADING</source>
2245             <translation>Shading</translation>
2246         </message>
2247         <message>
2248             <source>MEN_POP_TRANSPARENCY</source>
2249             <translation>Transparency</translation>
2250         </message>
2251         <message>
2252             <source>MEN_POP_WIREFRAME</source>
2253             <translation>Wireframe</translation>
2254         </message>
2255         <message>
2256             <source>MEN_PREFERENCES</source>
2257             <translation>Preferences</translation>
2258         </message>
2259         <message>
2260             <source>MEN_PREFERENCES_GEOM</source>
2261             <translation>Geometry</translation>
2262         </message>
2263         <message>
2264             <source>MEN_PRIMITIVES</source>
2265             <translation>Primitives</translation>
2266         </message>
2267         <message>
2268             <source>MEN_PROPAGATE</source>
2269             <translation>Propagate</translation>
2270         </message>
2271         <message>
2272             <source>MEN_Q_FACE</source>
2273             <translation>Quadrangle Face</translation>
2274         </message>
2275         <message>
2276             <source>MEN_REPAIR</source>
2277             <translation>Repair</translation>
2278         </message>
2279         <message>
2280             <source>MEN_REVOLUTION</source>
2281             <translation>Revolution</translation>
2282         </message>
2283         <message>
2284             <source>MEN_ROTATION</source>
2285             <translation>Rotation</translation>
2286         </message>
2287         <message>
2288             <source>MEN_SCALE</source>
2289             <translation>Scale transform</translation>
2290         </message>
2291         <message>
2292             <source>MEN_SECTION</source>
2293             <translation>Section</translation>
2294         </message>
2295         <message>
2296             <source>MEN_SELECT_ONLY</source>
2297             <translation>Select Only</translation>
2298         </message>
2299         <message>
2300             <source>MEN_SEWING</source>
2301             <translation>Sewing</translation>
2302         </message>
2303         <message>
2304             <source>MEN_SHADING</source>
2305             <translation>Shading</translation>
2306         </message>
2307         <message>
2308             <source>MEN_SHADING_COLOR</source>
2309             <translation>Shading color</translation>
2310         </message>
2311         <message>
2312             <source>MEN_SHAPE_PROCESS</source>
2313             <translation>Shape processing</translation>
2314         </message>
2315         <message>
2316             <source>MEN_SHELL</source>
2317             <translation>Shell</translation>
2318         </message>
2319         <message>
2320             <source>MEN_SHELL_SEL_ONLY</source>
2321             <translation>Shell</translation>
2322         </message>
2323         <message>
2324             <source>MEN_SKETCH</source>
2325             <translation>Sketch</translation>
2326         </message>
2327         <message>
2328             <source>MEN_SOLID</source>
2329             <translation>Solid</translation>
2330         </message>
2331         <message>
2332             <source>MEN_SOLID_SEL_ONLY</source>
2333             <translation>Solid</translation>
2334         </message>
2335         <message>
2336             <source>MEN_SPHERE</source>
2337             <translation>Sphere</translation>
2338         </message>
2339         <message>
2340             <source>MEN_STEP_VALUE</source>
2341             <translation>Step value</translation>
2342         </message>
2343         <message>
2344             <source>MEN_SUPPERSS_HOLES</source>
2345             <translation>Suppress holes</translation>
2346         </message>
2347         <message>
2348             <source>MEN_SUPPRESS_FACES</source>
2349             <translation>Suppress faces</translation>
2350         </message>
2351         <message>
2352             <source>MEN_SUPPRESS_INT_WIRES</source>
2353             <translation>Suppress internal wires</translation>
2354         </message>
2355         <message>
2356             <source>MEN_TOLERANCE</source>
2357             <translation>Compute tolerance</translation>
2358         </message>
2359         <message>
2360             <source>MEN_TOOLS</source>
2361             <translation>Tools</translation>
2362         </message>
2363         <message>
2364             <source>MEN_TORUS</source>
2365             <translation>Torus</translation>
2366         </message>
2367         <message>
2368             <source>MEN_TRANSFORMATION</source>
2369             <translation>Transformation</translation>
2370         </message>
2371         <message>
2372             <source>MEN_TRANSLATION</source>
2373             <translation>Translation</translation>
2374         </message>
2375         <message>
2376             <source>MEN_VECTOR</source>
2377             <translation>Vector</translation>
2378         </message>
2379         <message>
2380             <source>MEN_VERTEX_SEL_ONLY</source>
2381             <translation>Vertex</translation>
2382         </message>
2383         <message>
2384             <source>MEN_VIEW</source>
2385             <translation>View</translation>
2386         </message>
2387         <message>
2388             <source>MEN_WHAT_IS</source>
2389             <translation>What is</translation>
2390         </message>
2391         <message>
2392             <source>MEN_WIRE</source>
2393             <translation>Wire</translation>
2394         </message>
2395         <message>
2396             <source>MEN_WIREFRAME</source>
2397             <translation>Wireframe</translation>
2398         </message>
2399         <message>
2400             <source>MEN_WIRE_SEL_ONLY</source>
2401             <translation>Wire</translation>
2402         </message>
2403         <message>
2404             <source>MEN_WORK_PLANE</source>
2405             <translation>Working plane</translation>
2406         </message>
2407         <message>
2408             <source>NAME_LBL</source>
2409             <translation>Name: </translation>
2410         </message>
2411         <message>
2412             <source>NON_GEOM_OBJECTS_SELECTED</source>
2413             <translation>There are objects selected which do not belong to %1 component.</translation>
2414         </message>
2415         <message>
2416             <source>PREF_DISPLAY_MODE</source>
2417             <translation>Default display mode</translation>
2418         </message>
2419         <message>
2420             <source>PREF_FREE_BOUND_COLOR</source>
2421             <translation>Color of free boundaries</translation>
2422         </message>
2423         <message>
2424             <source>PREF_GROUP_GENERAL</source>
2425             <translation>General</translation>
2426         </message>
2427         <message>
2428             <source>PREF_GROUP_OCCVIEWER</source>
2429             <translation>OCC Viewer 3d</translation>
2430         </message>
2431         <message>
2432             <source>PREF_GROUP_VERTEX</source>
2433             <translation>Marker of Points</translation>
2434         </message>
2435         <message>
2436             <source>PREF_ISOS_COLOR</source>
2437             <translation>Color of isolines</translation>
2438         </message>
2439         <message>
2440             <source>PREF_LINE_COLOR</source>
2441             <translation>Color of edges, vectors, wires</translation>
2442         </message>
2443         <message>
2444             <source>PREF_MARKER_SCALE</source>
2445             <translation>Size</translation>
2446         </message>
2447         <message>
2448             <source>PREF_POINT_COLOR</source>
2449             <translation>Color of points</translation>
2450         </message>
2451         <message>
2452             <source>PREF_SHADING_COLOR</source>
2453             <translation>Default shading color</translation>
2454         </message>
2455         <message>
2456             <source>PREF_STEP_VALUE</source>
2457             <translation>Step value for spin boxes</translation>
2458         </message>
2459         <message>
2460             <source>PREF_TAB_SETTINGS</source>
2461             <translation>Settings</translation>
2462         </message>
2463         <message>
2464             <source>PREF_TYPE_OF_MARKER</source>
2465             <translation>Type</translation>
2466         </message>
2467         <message>
2468             <source>PREF_WIREFRAME_COLOR</source>
2469             <translation>Default wireframe color</translation>
2470         </message>
2471         <message>
2472             <source>PROCESS_SHAPE_NEW_OBJ_NAME</source>
2473             <translation>ProcessShape</translation>
2474         </message>
2475         <message>
2476             <source>REMOVE_HOLES_NEW_OBJ_NAME</source>
2477             <translation>SupressHoles</translation>
2478         </message>
2479         <message>
2480             <source>REMOVE_INT_WIRES_NEW_OBJ_NAME</source>
2481             <translation>RemoveIntWires</translation>
2482         </message>
2483         <message>
2484             <source>SEWING_NEW_OBJ_NAME</source>
2485             <translation>Sewing</translation>
2486         </message>
2487         <message>
2488             <source>STB_ALL_SEL_ONLY</source>
2489             <translation>Select all Objects</translation>
2490         </message>
2491         <message>
2492             <source>STB_ARC</source>
2493             <translation>Create an arc</translation>
2494         </message>
2495         <message>
2496             <source>STB_ARCHIMEDE</source>
2497             <translation>Archimede</translation>
2498         </message>
2499         <message>
2500             <source>STB_BASIC_PROPS</source>
2501             <translation>Basic properties</translation>
2502         </message>
2503         <message>
2504             <source>STB_BND_BOX</source>
2505             <translation>Compute bounding box</translation>
2506         </message>
2507         <message>
2508             <source>STB_BOX</source>
2509             <translation>Create a box</translation>
2510         </message>
2511         <message>
2512             <source>STB_CHAMFER</source>
2513             <translation>Chamfer</translation>
2514         </message>
2515         <message>
2516             <source>STB_CHANGE_ORIENTATION</source>
2517             <translation>Change orientation</translation>
2518         </message>
2519         <message>
2520             <source>STB_CHECK</source>
2521             <translation>Check</translation>
2522         </message>
2523         <message>
2524             <source>STB_CHECK_COMPOUND</source>
2525             <translation>Check compound of blocks</translation>
2526         </message>
2527         <message>
2528             <source>STB_CHECK_FREE_BNDS</source>
2529             <translation>Check free boundaries</translation>
2530         </message>
2531         <message>
2532             <source>STB_CHECK_FREE_FACES</source>
2533             <translation>Check free faces</translation>
2534         </message>
2535         <message>
2536             <source>STB_CHECK_GEOMETRY</source>
2537             <translation>Check Geometry</translation>
2538         </message>
2539         <message>
2540             <source>STB_CIRCLE</source>
2541             <translation>Create a circle</translation>
2542         </message>
2543         <message>
2544             <source>STB_CLIPPING</source>
2545             <translation>Clipping range</translation>
2546         </message>
2547         <message>
2548             <source>STB_CLOSE_CONTOUR</source>
2549             <translation>Perform close contour</translation>
2550         </message>
2551         <message>
2552             <source>STB_COMMON</source>
2553             <translation>Common</translation>
2554         </message>
2555         <message>
2556             <source>STB_COMPOUND</source>
2557             <translation>Build a compound</translation>
2558         </message>
2559         <message>
2560             <source>STB_COMPOUND_SEL_ONLY</source>
2561             <translation>Select only a Compounds</translation>
2562         </message>
2563         <message>
2564             <source>STB_CONE</source>
2565             <translation>Create a cone</translation>
2566         </message>
2567         <message>
2568             <source>STB_CURVE</source>
2569             <translation>Create a curve</translation>
2570         </message>
2571         <message>
2572             <source>STB_CUT</source>
2573             <translation>Cut</translation>
2574         </message>
2575         <message>
2576             <source>STB_CYLINDER</source>
2577             <translation>Create a cylinder</translation>
2578         </message>
2579         <message>
2580             <source>STB_DELETE</source>
2581             <translation>Delete object</translation>
2582         </message>
2583         <message>
2584             <source>STB_DISK</source>
2585             <translation>Create a disk</translation>
2586         </message>
2587         <message>
2588             <source>STB_DISPLAY</source>
2589             <translation>Show object(s)</translation>
2590         </message>
2591         <message>
2592             <source>STB_DISPLAY_ALL</source>
2593             <translation>Show all</translation>
2594         </message>
2595         <message>
2596             <source>STB_DISPLAY_ONLY</source>
2597             <translation>Show only</translation>
2598         </message>
2599         <message>
2600             <source>STB_EDGE</source>
2601             <translation>Build an edge</translation>
2602         </message>
2603         <message>
2604             <source>STB_EDGE_SEL_ONLY</source>
2605             <translation>Select only a Edges</translation>
2606         </message>
2607         <message>
2608             <source>STB_ELLIPSE</source>
2609             <translation>Create an ellipse</translation>
2610         </message>
2611         <message>
2612             <source>STB_ERASE</source>
2613             <translation>Hide object(s)</translation>
2614         </message>
2615         <message>
2616             <source>STB_ERASE_ALL</source>
2617             <translation>Hide all</translation>
2618         </message>
2619         <message>
2620             <source>STB_EXPLODE</source>
2621             <translation>Explode</translation>
2622         </message>
2623         <message>
2624             <source>STB_EXPLODE_BLOCKS</source>
2625             <translation>Explode on Blocks</translation>
2626         </message>
2627         <message>
2628             <source>STB_EXPORT</source>
2629             <translation>Export geometry to BREP file</translation>
2630         </message>
2631         <message>
2632             <source>STB_EXTRUSION</source>
2633             <translation>Create an extrusion</translation>
2634         </message>
2635         <message>
2636             <source>STB_FACE</source>
2637             <translation>Build a face</translation>
2638         </message>
2639         <message>
2640             <source>STB_FACE_SEL_ONLY</source>
2641             <translation>Select only a Faces</translation>
2642         </message>
2643         <message>
2644             <source>STB_FILLET</source>
2645             <translation>Fillet</translation>
2646         </message>
2647         <message>
2648             <source>STB_FILLING</source>
2649             <translation>Create a filling</translation>
2650         </message>
2651         <message>
2652             <source>STB_FUSE</source>
2653             <translation>Fuse</translation>
2654         </message>
2655         <message>
2656             <source>STB_GLUE_FACES</source>
2657             <translation>Perform glue faces</translation>
2658         </message>
2659         <message>
2660             <source>STB_GROUP_CREATE</source>
2661             <translation>Create a group</translation>
2662         </message>
2663         <message>
2664             <source>STB_GROUP_EDIT</source>
2665             <translation>Edit a group</translation>
2666         </message>
2667         <message>
2668             <source>STB_RELOAD_IMPORTED</source>
2669             <translation>Reload imported shape from its original place on disk</translation>
2670         </message>
2671         <message>
2672             <source>STB_HEX_SOLID</source>
2673             <translation>Hexahedral Solid</translation>
2674         </message>
2675         <message>
2676             <source>STB_IMPORT</source>
2677             <translation>Import geometry from BREP file</translation>
2678         </message>
2679         <message>
2680             <source>STB_INERTIA</source>
2681             <translation>Compute intertia</translation>
2682         </message>
2683         <message>
2684             <source>STB_ISOS</source>
2685             <translation>Set number of isolines</translation>
2686         </message>
2687         <message>
2688             <source>STB_LINE</source>
2689             <translation>Create a line</translation>
2690         </message>
2691         <message>
2692             <source>STB_LOCAL_CS</source>
2693             <translation>Create a local coordinate system</translation>
2694         </message>
2695         <message>
2696             <source>STB_MASS_CENTER</source>
2697             <translation>Compute center of mass</translation>
2698         </message>
2699         <message>
2700             <source>STB_MIN_DIST</source>
2701             <translation>Compute minimum distance</translation>
2702         </message>
2703         <message>
2704             <source>STB_MIRROR</source>
2705             <translation>Mirror image</translation>
2706         </message>
2707         <message>
2708             <source>STB_MODIFY_LOCATION</source>
2709             <translation>Modify the Location</translation>
2710         </message>
2711         <message>
2712             <source>STB_MUL_ROTATION</source>
2713             <translation>Multi-Rotation</translation>
2714         </message>
2715         <message>
2716             <source>STB_MUL_TRANSFORM</source>
2717             <translation>Multi-transformation</translation>
2718         </message>
2719         <message>
2720             <source>STB_MUL_TRANSLATION</source>
2721             <translation>Multi-Translation</translation>
2722         </message>
2723         <message>
2724             <source>STB_OFFSET</source>
2725             <translation>Offset surface</translation>
2726         </message>
2727         <message>
2728             <source>STB_PARTITION</source>
2729             <translation>Partition</translation>
2730         </message>
2731         <message>
2732             <source>STB_PIPE</source>
2733             <translation>Create a shape by Extrusion along a path</translation>
2734         </message>
2735         <message>
2736             <source>STB_PLANE</source>
2737             <translation>Create a plane</translation>
2738         </message>
2739         <message>
2740             <source>STB_POINT</source>
2741             <translation>Create a point</translation>
2742         </message>
2743         <message>
2744             <source>STB_POINT_COORDS</source>
2745             <translation>Point coordinates</translation>
2746         </message>
2747         <message>
2748             <source>STB_POINT_ON_EDGE</source>
2749             <translation>Add point on edge</translation>
2750         </message>
2751         <message>
2752             <source>STB_POP_COLOR</source>
2753             <translation>Color</translation>
2754         </message>
2755         <message>
2756             <source>STB_POP_CREATE_GROUP</source>
2757             <translation>Create Group</translation>
2758         </message>
2759         <message>
2760             <source>STB_POP_ISOS</source>
2761             <translation>Isolines</translation>
2762         </message>
2763         <message>
2764             <source>STB_POP_RENAME</source>
2765             <translation>Rename</translation>
2766         </message>
2767         <message>
2768             <source>STB_POP_SHADING</source>
2769             <translation>Shading</translation>
2770         </message>
2771         <message>
2772             <source>STB_POP_TRANSPARENCY</source>
2773             <translation>Transparency</translation>
2774         </message>
2775         <message>
2776             <source>STB_POP_WIREFRAME</source>
2777             <translation>Wireframe</translation>
2778         </message>
2779         <message>
2780             <source>STB_PROPAGATE</source>
2781             <translation>Propagate</translation>
2782         </message>
2783         <message>
2784             <source>STB_Q_FACE</source>
2785             <translation>Quadrangle Face</translation>
2786         </message>
2787         <message>
2788             <source>STB_REVOLUTION</source>
2789             <translation>Create a revolution</translation>
2790         </message>
2791         <message>
2792             <source>STB_ROTATION</source>
2793             <translation>Rotation</translation>
2794         </message>
2795         <message>
2796             <source>STB_SCALE</source>
2797             <translation>Scale transform</translation>
2798         </message>
2799         <message>
2800             <source>STB_SECTION</source>
2801             <translation>Section</translation>
2802         </message>
2803         <message>
2804             <source>STB_SEWING</source>
2805             <translation>Perform sewing</translation>
2806         </message>
2807         <message>
2808             <source>STB_SHADING</source>
2809             <translation>Shading</translation>
2810         </message>
2811         <message>
2812             <source>STB_SHADING_COLOR</source>
2813             <translation>Set shading color</translation>
2814         </message>
2815         <message>
2816             <source>STB_SHAPE_PROCESS</source>
2817             <translation>Perform shape processing </translation>
2818         </message>
2819         <message>
2820             <source>STB_SHELL</source>
2821             <translation>Build a shell</translation>
2822         </message>
2823         <message>
2824             <source>STB_SHELL_SEL_ONLY</source>
2825             <translation>Select only a Shells</translation>
2826         </message>
2827         <message>
2828             <source>STB_SKETCH</source>
2829             <translation>Sketch</translation>
2830         </message>
2831         <message>
2832             <source>STB_SOLID</source>
2833             <translation>Build a solid</translation>
2834         </message>
2835         <message>
2836             <source>STB_SOLID_SEL_ONLY</source>
2837             <translation>Select only a Solids</translation>
2838         </message>
2839         <message>
2840             <source>STB_SPHERE</source>
2841             <translation>Create a sphere</translation>
2842         </message>
2843         <message>
2844             <source>STB_STEP_VALUE</source>
2845             <translation>Set step value</translation>
2846         </message>
2847         <message>
2848             <source>STB_SUPPERSS_HOLES</source>
2849             <translation>Perform suppress holes</translation>
2850         </message>
2851         <message>
2852             <source>STB_SUPPRESS_FACES</source>
2853             <translation>Perform suppress faces</translation>
2854         </message>
2855         <message>
2856             <source>STB_SUPPRESS_INT_WIRES</source>
2857             <translation>Perform suppress internal wires</translation>
2858         </message>
2859         <message>
2860             <source>STB_TOLERANCE</source>
2861             <translation>Compute tolerance</translation>
2862         </message>
2863         <message>
2864             <source>STB_TORUS</source>
2865             <translation>Create a torus</translation>
2866         </message>
2867         <message>
2868             <source>STB_TRANSLATION</source>
2869             <translation>Translation</translation>
2870         </message>
2871         <message>
2872             <source>STB_VECTOR</source>
2873             <translation>Create a vector</translation>
2874         </message>
2875         <message>
2876             <source>STB_VERTEX_SEL_ONLY</source>
2877             <translation>Select only a Points</translation>
2878         </message>
2879         <message>
2880             <source>STB_WHAT_IS</source>
2881             <translation>What is</translation>
2882         </message>
2883         <message>
2884             <source>STB_WIRE</source>
2885             <translation>Build a wire</translation>
2886         </message>
2887         <message>
2888             <source>STB_WIRE_SEL_ONLY</source>
2889             <translation>Select only a Wires</translation>
2890         </message>
2891         <message>
2892             <source>STB_WORK_PLANE</source>
2893             <translation>Create a working plane</translation>
2894         </message>
2895         <message>
2896             <source>SUPPRESS_RESULT</source>
2897             <translation>Suppress Result</translation>
2898         </message>
2899         <message>
2900             <source>SUPRESS_FACE_NEW_OBJ_NAME</source>
2901             <translation>SupressFaces</translation>
2902         </message>
2903         <message>
2904             <source>ShHealOper_ErrorExecution_msg</source>
2905             <translation>Shape Healing algorithm failed</translation>
2906         </message>
2907         <message>
2908             <source>ShHealOper_InvalidParameters_msg</source>
2909             <translation>Incorrect parameters for Shape Healing algorithm</translation>
2910         </message>
2911         <message>
2912             <source>ShHealOper_NotError_msg</source>
2913             <translation>Shape Healing algorithm has done no modification of the original shape</translation>
2914         </message>
2915         <message>
2916             <source>TLT_RENAME</source>
2917             <translation>Rename</translation>
2918         </message>
2919         <message>
2920             <source>TOM_O</source>
2921             <translation>O</translation>
2922         </message>
2923         <message>
2924             <source>TOM_O_PLUS</source>
2925             <translation>+ in O</translation>
2926         </message>
2927         <message>
2928             <source>TOM_O_POINT</source>
2929             <translation>. in O</translation>
2930         </message>
2931         <message>
2932             <source>TOM_O_STAR</source>
2933             <translation>* in O</translation>
2934         </message>
2935         <message>
2936             <source>TOM_O_X</source>
2937             <translation>X in O</translation>
2938         </message>
2939         <message>
2940             <source>TOM_PLUS</source>
2941             <translation>+</translation>
2942         </message>
2943         <message>
2944             <source>TOM_POINT</source>
2945             <translation>.</translation>
2946         </message>
2947         <message>
2948             <source>TOM_STAR</source>
2949             <translation>*</translation>
2950         </message>
2951         <message>
2952             <source>TOM_X</source>
2953             <translation>X</translation>
2954         </message>
2955         <message>
2956             <source>TOOL_BASIC</source>
2957             <translation>Basic</translation>
2958         </message>
2959         <message>
2960             <source>TOOL_BOOLEAN</source>
2961             <translation>Boolean operations</translation>
2962         </message>
2963         <message>
2964             <source>TOOL_GENERATION</source>
2965             <translation>Generation</translation>
2966         </message>
2967         <message>
2968             <source>TOOL_PRIMITIVES</source>
2969             <translation>Primitives</translation>
2970         </message>
2971         <message>
2972             <source>TOOL_TRANSFORMATION</source>
2973             <translation>Transformation</translation>
2974         </message>
2975         <message>
2976             <source>TOP_ARC</source>
2977             <translation>Create an arc</translation>
2978         </message>
2979         <message>
2980             <source>TOP_ARCHIMEDE</source>
2981             <translation>Archimede</translation>
2982         </message>
2983         <message>
2984             <source>TOP_BASIC_PROPS</source>
2985             <translation>Basic properties</translation>
2986         </message>
2987         <message>
2988             <source>TOP_BND_BOX</source>
2989             <translation>Compute bounding box</translation>
2990         </message>
2991         <message>
2992             <source>TOP_BOX</source>
2993             <translation>Create a box</translation>
2994         </message>
2995         <message>
2996             <source>TOP_CHAMFER</source>
2997             <translation>Chamfer</translation>
2998         </message>
2999         <message>
3000             <source>TOP_CHANGE_ORIENTATION</source>
3001             <translation>Change orientation</translation>
3002         </message>
3003         <message>
3004             <source>TOP_CHECK</source>
3005             <translation>Check</translation>
3006         </message>
3007         <message>
3008             <source>TOP_CHECK_COMPOUND</source>
3009             <translation>Check compound of blocks</translation>
3010         </message>
3011         <message>
3012             <source>TOP_CHECK_FREE_BNDS</source>
3013             <translation>Check free boundaries</translation>
3014         </message>
3015         <message>
3016             <source>TOP_CHECK_FREE_FACES</source>
3017             <translation>Check free faces</translation>
3018         </message>
3019         <message>
3020             <source>TOP_CHECK_GEOMETRY</source>
3021             <translation>Check Geometry</translation>
3022         </message>
3023         <message>
3024             <source>TOP_CIRCLE</source>
3025             <translation>Create a circle</translation>
3026         </message>
3027         <message>
3028             <source>TOP_CLIPPING</source>
3029             <translation>Clipping range</translation>
3030         </message>
3031         <message>
3032             <source>TOP_CLOSE_CONTOUR</source>
3033             <translation>Perform close contour</translation>
3034         </message>
3035         <message>
3036             <source>TOP_COMMON</source>
3037             <translation>Common</translation>
3038         </message>
3039         <message>
3040             <source>TOP_COMPOUND</source>
3041             <translation>Build a compound</translation>
3042         </message>
3043         <message>
3044             <source>TOP_CONE</source>
3045             <translation>Create a cone</translation>
3046         </message>
3047         <message>
3048             <source>TOP_CURVE</source>
3049             <translation>Create a curve</translation>
3050         </message>
3051         <message>
3052             <source>TOP_CUT</source>
3053             <translation>Cut</translation>
3054         </message>
3055         <message>
3056             <source>TOP_CYLINDER</source>
3057             <translation>Create a cylinder</translation>
3058         </message>
3059         <message>
3060             <source>TOP_DELETE</source>
3061             <translation>Delete object</translation>
3062         </message>
3063         <message>
3064             <source>TOP_DISK</source>
3065             <translation>Build a Disk</translation>
3066         </message>
3067         <message>
3068             <source>TOP_DISPLAY</source>
3069             <translation>Show</translation>
3070         </message>
3071         <message>
3072             <source>TOP_DISPLAY_ALL</source>
3073             <translation>Show all</translation>
3074         </message>
3075         <message>
3076             <source>TOP_DISPLAY_ONLY</source>
3077             <translation>Show only</translation>
3078         </message>
3079         <message>
3080             <source>TOP_EDGE</source>
3081             <translation>Build an edge</translation>
3082         </message>
3083         <message>
3084             <source>TOP_ELLIPSE</source>
3085             <translation>Create an ellipse</translation>
3086         </message>
3087         <message>
3088             <source>TOP_ERASE</source>
3089             <translation>Hide</translation>
3090         </message>
3091         <message>
3092             <source>TOP_ERASE_ALL</source>
3093             <translation>Hide all</translation>
3094         </message>
3095         <message>
3096             <source>TOP_EXPLODE</source>
3097             <translation>Explode</translation>
3098         </message>
3099         <message>
3100             <source>TOP_EXPLODE_BLOCKS</source>
3101             <translation>Explode on Blocks</translation>
3102         </message>
3103         <message>
3104             <source>TOP_EXPORT</source>
3105             <translation>Export geometry to BREP file</translation>
3106         </message>
3107         <message>
3108             <source>TOP_EXTRUSION</source>
3109             <translation>Create an extrusion</translation>
3110         </message>
3111         <message>
3112             <source>TOP_FACE</source>
3113             <translation>Build a face</translation>
3114         </message>
3115         <message>
3116             <source>TOP_FILLET</source>
3117             <translation>Fillet</translation>
3118         </message>
3119         <message>
3120             <source>TOP_FILLING</source>
3121             <translation>Create a filling</translation>
3122         </message>
3123         <message>
3124             <source>TOP_FUSE</source>
3125             <translation>Fuse</translation>
3126         </message>
3127         <message>
3128             <source>TOP_GLUE_FACES</source>
3129             <translation>Perform glue faces</translation>
3130         </message>
3131         <message>
3132             <source>TOP_GROUP_CREATE</source>
3133             <translation>Create a group</translation>
3134         </message>
3135         <message>
3136             <source>TOP_GROUP_EDIT</source>
3137             <translation>Edit a group</translation>
3138         </message>
3139         <message>
3140             <source>TOP_HEX_SOLID</source>
3141             <translation>Hexahedral Solid</translation>
3142         </message>
3143         <message>
3144             <source>TOP_IMPORT</source>
3145             <translation>Import geometry from BREP file</translation>
3146         </message>
3147         <message>
3148             <source>TOP_INERTIA</source>
3149             <translation>Compute intertia</translation>
3150         </message>
3151         <message>
3152             <source>TOP_ISOS</source>
3153             <translation>Set number of isolines</translation>
3154         </message>
3155         <message>
3156             <source>TOP_LINE</source>
3157             <translation>Create a line</translation>
3158         </message>
3159         <message>
3160             <source>TOP_LOCAL_CS</source>
3161             <translation>Create a local coordinate system</translation>
3162         </message>
3163         <message>
3164             <source>TOP_MASS_CENTER</source>
3165             <translation>Compute center of mass</translation>
3166         </message>
3167         <message>
3168             <source>TOP_MIN_DIST</source>
3169             <translation>Compute minimum distance</translation>
3170         </message>
3171         <message>
3172             <source>TOP_MIRROR</source>
3173             <translation>Mirror image</translation>
3174         </message>
3175         <message>
3176             <source>TOP_MODIFY_LOCATION</source>
3177             <translation>Modify the Location</translation>
3178         </message>
3179         <message>
3180             <source>TOP_MUL_ROTATION</source>
3181             <translation>Multi-Rotation</translation>
3182         </message>
3183         <message>
3184             <source>TOP_MUL_TRANSFORM</source>
3185             <translation>Multi-transformation</translation>
3186         </message>
3187         <message>
3188             <source>TOP_MUL_TRANSLATION</source>
3189             <translation>Multi-Translation</translation>
3190         </message>
3191         <message>
3192             <source>TOP_OFFSET</source>
3193             <translation>Offset surface</translation>
3194         </message>
3195         <message>
3196             <source>TOP_PARTITION</source>
3197             <translation>Partition</translation>
3198         </message>
3199         <message>
3200             <source>TOP_PIPE</source>
3201             <translation>Extrusion along a path</translation>
3202         </message>
3203         <message>
3204             <source>TOP_PLANE</source>
3205             <translation>Create a plane</translation>
3206         </message>
3207         <message>
3208             <source>TOP_POINT</source>
3209             <translation>Create a point</translation>
3210         </message>
3211         <message>
3212             <source>TOP_POINT_COORDS</source>
3213             <translation>Point coordinates</translation>
3214         </message>
3215         <message>
3216             <source>TOP_POINT_ON_EDGE</source>
3217             <translation>Add point on edge</translation>
3218         </message>
3219         <message>
3220             <source>TOP_POP_COLOR</source>
3221             <translation>Color</translation>
3222         </message>
3223         <message>
3224             <source>TOP_POP_CREATE_GROUP</source>
3225             <translation>Create Group</translation>
3226         </message>
3227         <message>
3228             <source>TOP_POP_ISOS</source>
3229             <translation>Isolines</translation>
3230         </message>
3231         <message>
3232             <source>TOP_POP_RENAME</source>
3233             <translation>Rename</translation>
3234         </message>
3235         <message>
3236             <source>TOP_POP_SHADING</source>
3237             <translation>Shading</translation>
3238         </message>
3239         <message>
3240             <source>TOP_POP_TRANSPARENCY</source>
3241             <translation>Transparency</translation>
3242         </message>
3243         <message>
3244             <source>TOP_POP_WIREFRAME</source>
3245             <translation>Wireframe</translation>
3246         </message>
3247         <message>
3248             <source>TOP_PROPAGATE</source>
3249             <translation>Propagate</translation>
3250         </message>
3251         <message>
3252             <source>TOP_Q_FACE</source>
3253             <translation>Quadrangle Face</translation>
3254         </message>
3255         <message>
3256             <source>TOP_REVOLUTION</source>
3257             <translation>Create a revolution</translation>
3258         </message>
3259         <message>
3260             <source>TOP_ROTATION</source>
3261             <translation>Rotation</translation>
3262         </message>
3263         <message>
3264             <source>TOP_SCALE</source>
3265             <translation>Scale transform</translation>
3266         </message>
3267         <message>
3268             <source>TOP_SECTION</source>
3269             <translation>Section</translation>
3270         </message>
3271         <message>
3272             <source>TOP_SEWING</source>
3273             <translation>Perform sewing</translation>
3274         </message>
3275         <message>
3276             <source>TOP_SHADING</source>
3277             <translation>Shading</translation>
3278         </message>
3279         <message>
3280             <source>TOP_SHADING_COLOR</source>
3281             <translation>Set shading color</translation>
3282         </message>
3283         <message>
3284             <source>TOP_SHAPE_PROCESS</source>
3285             <translation>Perform shape processing</translation>
3286         </message>
3287         <message>
3288             <source>TOP_SHELL</source>
3289             <translation>Build a shell</translation>
3290         </message>
3291         <message>
3292             <source>TOP_SKETCH</source>
3293             <translation>Sketch</translation>
3294         </message>
3295         <message>
3296             <source>TOP_SOLID</source>
3297             <translation>Build a solid</translation>
3298         </message>
3299         <message>
3300             <source>TOP_SPHERE</source>
3301             <translation>Create a sphere</translation>
3302         </message>
3303         <message>
3304             <source>TOP_STEP_VALUE</source>
3305             <translation>Set step value</translation>
3306         </message>
3307         <message>
3308             <source>TOP_SUPPERSS_HOLES</source>
3309             <translation>Perform suppress holes</translation>
3310         </message>
3311         <message>
3312             <source>TOP_SUPPRESS_FACES</source>
3313             <translation>Perform suppress faces</translation>
3314         </message>
3315         <message>
3316             <source>TOP_SUPPRESS_INT_WIRES</source>
3317             <translation>Perform suppress internal wires</translation>
3318         </message>
3319         <message>
3320             <source>TOP_TOLERANCE</source>
3321             <translation>Compute tolerance</translation>
3322         </message>
3323         <message>
3324             <source>TOP_TORUS</source>
3325             <translation>Create a torus</translation>
3326         </message>
3327         <message>
3328             <source>TOP_TRANSLATION</source>
3329             <translation>Translation</translation>
3330         </message>
3331         <message>
3332             <source>TOP_VECTOR</source>
3333             <translation>Create a vector</translation>
3334         </message>
3335         <message>
3336             <source>TOP_WHAT_IS</source>
3337             <translation>What is</translation>
3338         </message>
3339         <message>
3340             <source>TOP_WIRE</source>
3341             <translation>Build a wire</translation>
3342         </message>
3343         <message>
3344             <source>TOP_WORK_PLANE</source>
3345             <translation>Create a working plane</translation>
3346         </message>
3347         <message>
3348             <source>WRN_NOT_IMPLEMENTED</source>
3349             <translation>Sorry, this functionality is not yet implemented</translation>
3350         </message>
3351         <message>
3352             <source>_S_</source>
3353             <translation>(s)</translation>
3354         </message>
3355         <message>
3356             <source>NOT_FOUND_ANY</source>
3357             <translation>Not a single entity has been found</translation>
3358         </message>
3359         <message>
3360             <source>GEOM_FACE_I</source>
3361             <translation>Face %1</translation>
3362         </message>
3363         <message>
3364             <source>GEOM_CONSTANT_RADIUS</source>
3365             <translation>Radius :</translation>
3366         </message>
3367         <message>
3368             <source>GEOM_R1</source>
3369             <translation>R1 :</translation>
3370         </message>
3371         <message>
3372             <source>GEOM_R2</source>
3373             <translation>R2 :</translation>
3374         </message>
3375         <message>
3376             <source>GEOM_BOTHWAY</source>
3377             <translation>Both Directions</translation>
3378         </message>
3379         <message>
3380             <source>GEOM_NORMALE</source>
3381             <translation>Normal To A Face</translation>
3382         </message>
3383         <message>
3384             <source>GEOM_VECTOR_NORMALE</source>
3385             <translation>Vector_Normal</translation>
3386         </message>
3387         <message>
3388             <source>GEOM_LINE1</source>
3389             <translation>Line 1</translation>
3390         </message>
3391         <message>
3392             <source>GEOM_LINE2</source>
3393             <translation>Line 2</translation>
3394         </message>
3395         <message>
3396             <source>GEOM_D</source>
3397             <translation>D :</translation>
3398         </message>
3399         <message>
3400             <source>GEOM_CHAMFER_EDGE</source>
3401             <translation>Chamfer On Selected Edges</translation>
3402         </message>
3403         <message>
3404             <source>SELECTED_EDGE</source>
3405             <translation>Selected Edges</translation>
3406         </message>
3407         <message>
3408             <source>GEOM_NORMALE_TITLE</source>
3409             <translation>Create Normal To A Face</translation>
3410         </message>
3411         <message>
3412             <source>GEOM_MEASURE_ANGLE_TITLE</source>
3413             <translation>Angle Between Two Straight Edges/Lines/Vectors</translation>
3414         </message>
3415         <message>
3416             <source>GEOM_MEASURE_ANGLE_ANGLE</source>
3417             <translation>Angle</translation>
3418         </message>
3419         <message>
3420             <source>GEOM_MEASURE_ANGLE_OBJ</source>
3421             <translation>Objects And Results</translation>
3422         </message>
3423         <message>
3424             <source>GEOM_MEASURE_ANGLE_IS</source>
3425             <translation>Angle in degrees :</translation>
3426         </message>
3427         <message>
3428             <source>GEOM_LINE_INTERSECTION</source>
3429             <translation>Point On Lines Intersection</translation>
3430         </message>
3431         <message>
3432             <source>GEOM_KEEP_NONLIMIT_SHAPES</source>
3433             <translation>Keep shapes of lower type</translation>
3434         </message>
3435         <message>
3436             <source>GEOM_CENTER_2POINTS</source>
3437             <translation>Center and two points</translation>
3438         </message>
3439         <message>
3440             <source>GEOM_REMOVE_EXTRA_EDGES_TITLE</source>
3441             <translation>Remove extra edges</translation>
3442         </message>
3443         <message>
3444             <source>GEOM_REMOVE_EXTRA_EDGES</source>
3445             <translation>Object to remove extra edges</translation>
3446         </message>
3447         <message>
3448             <source>REMOVE_EXTRA_EDGES_NEW_OBJ_NAME</source>
3449             <translation>NoExtraEdges</translation>
3450         </message>
3451         <message>
3452             <source>TOP_REMOVE_EXTRA_EDGES</source>
3453             <translation>Remove extra edges</translation>
3454         </message>
3455         <message>
3456             <source>MEN_REMOVE_EXTRA_EDGES</source>
3457             <translation>Remove extra edges</translation>
3458         </message>
3459         <message>
3460             <source>STB_REMOVE_EXTRA_EDGES</source>
3461             <translation>Remove extra edges</translation>
3462         </message>
3463         <message>
3464             <source>TOP_NORMALE</source>
3465             <translation>Compute normal to a face</translation>
3466         </message>
3467         <message>
3468             <source>MEN_NORMALE</source>
3469             <translation>Normal to a face</translation>
3470         </message>
3471         <message>
3472             <source>STB_NORMALE</source>
3473             <translation>Compute normal to a face in a point (optional)</translation>
3474         </message>
3475         <message>
3476             <source>TOP_MEASURE_ANGLE</source>
3477             <translation>Compute angle</translation>
3478         </message>
3479         <message>
3480             <source>MEN_MEASURE_ANGLE</source>
3481             <translation>Angle</translation>
3482         </message>
3483         <message>
3484             <source>STB_MEASURE_ANGLE</source>
3485             <translation>Compute angle between two lines or linear edges</translation>
3486         </message>
3487         <message>
3488             <source>TOP_POP_AUTO_COLOR</source>
3489             <translation>Auto color</translation>
3490         </message>
3491         <message>
3492             <source>MEN_POP_AUTO_COLOR</source>
3493             <translation>Auto color</translation>
3494         </message>
3495         <message>
3496             <source>STB_POP_AUTO_COLOR</source>
3497             <translation>Auto color</translation>
3498         </message>
3499         <message>
3500             <source>TOP_POP_DISABLE_AUTO_COLOR</source>
3501             <translation>Disable auto color</translation>
3502         </message>
3503         <message>
3504             <source>MEN_POP_DISABLE_AUTO_COLOR</source>
3505             <translation>Disable auto color</translation>
3506         </message>
3507         <message>
3508             <source>STB_POP_DISABLE_AUTO_COLOR</source>
3509             <translation>Disable auto color</translation>
3510         </message>
3511         <message>
3512             <source>GEOM_RESULT_NAME_GRP</source>
3513             <translation>Result name</translation>
3514         </message>
3515         <message>
3516             <source>GEOM_RESULT_NAME_LBL</source>
3517             <translation>Name</translation>
3518         </message>
3519         <message>
3520             <source>GEOM_FILLING_APPROX</source>
3521             <translation>Approximation</translation>
3522         </message>
3523         <message>
3524             <source>GEOM_WRN_NO_APPROPRIATE_SELECTION</source>
3525             <translation>No appropriate objects selected</translation>
3526         </message>
3527         <message>
3528             <source>GEOM_SHAPES_ON_SHAPE</source>
3529             <translation>Get shapes on shape</translation>
3530         </message>
3531         <message>
3532             <source>GEOM_SHAPES_ON_SHAPE_ESHAPE</source>
3533             <translation>Shape for exploding</translation>
3534         </message>
3535         <message>
3536             <source>GEOM_SHAPES_ON_SHAPE_CSHAPE</source>
3537             <translation>Shape for checking</translation>
3538         </message>
3539         <message>
3540             <source>GEOM_SHAPES_ON_SHAPE_STATE</source>
3541             <translation>State</translation>
3542         </message>
3543         <message>
3544             <source>GEOM_KIND_OF_SHAPE</source>
3545             <translation>Kind of Shape :</translation>
3546         </message>
3547         <message>
3548             <source>GEOM_CLOSED</source>
3549             <translation>Closed</translation>
3550         </message>
3551         <message>
3552             <source>GEOM_UNCLOSED</source>
3553             <translation>Opened</translation>
3554         </message>
3555         <message>
3556             <source>GEOM_CLOSEDUNCLOSED</source>
3557             <translation>Not defined, Closed or Opened. Possibly, error occured.</translation>
3558         </message>
3559         <message>
3560             <source>GEOM_DISK_CIRCLE</source>
3561             <translation>Disk</translation>
3562         </message>
3563         <message>
3564             <source>GEOM_DISK_ELLIPSE</source>
3565             <translation>Elliptical face</translation>
3566         </message>
3567         <message>
3568             <source>GEOM_PLANAR_FACE</source>
3569             <translation>Planar face</translation>
3570         </message>
3571         <message>
3572             <source>GEOM_POLYGON</source>
3573             <translation>Polygon</translation>
3574         </message>
3575         <message>
3576             <source>GEOM_NORMAL</source>
3577             <translation>Normal direction</translation>
3578         </message>
3579         <message>
3580             <source>GEOM_DIRECTION</source>
3581             <translation>Direction</translation>
3582         </message>
3583         <message>
3584             <source>GEOM_UPARAMETER</source>
3585             <translation>U-parameter :</translation>
3586         </message>
3587         <message>
3588             <source>GEOM_VPARAMETER</source>
3589             <translation>V-parameter :</translation>
3590         </message>
3591         <message>
3592             <source>GEOM_X_I</source>
3593             <translation>X%1 :</translation>
3594         </message>
3595         <message>
3596             <source>GEOM_Y_I</source>
3597             <translation>Y%1 :</translation>
3598         </message>
3599         <message>
3600             <source>GEOM_Z_I</source>
3601             <translation>Z%1 :</translation>
3602         </message>
3603         <message>
3604             <source>GEOM_SHAPES_ON_SHAPE_TITLE</source>
3605             <translation>Get shapes on shape</translation>
3606         </message>
3607         <message>
3608             <source>GEOM_SCALE_FACTOR_X</source>
3609             <translation>Scale Factor X :</translation>
3610         </message>
3611         <message>
3612             <source>GEOM_SCALE_FACTOR_Y</source>
3613             <translation>Scale Factor Y :</translation>
3614         </message>
3615         <message>
3616             <source>GEOM_SCALE_FACTOR_Z</source>
3617             <translation>Scale Factor Z :</translation>
3618         </message>
3619         <message>
3620             <source>GEOM_STATE_IN</source>
3621             <translation>IN</translation>
3622         </message>
3623         <message>
3624             <source>GEOM_STATE_OUT</source>
3625             <translation>OUT</translation>
3626         </message>
3627         <message>
3628             <source>GEOM_STATE_ON</source>
3629             <translation>ON</translation>
3630         </message>
3631         <message>
3632             <source>GEOM_STATE_ONIN</source>
3633             <translation>ONIN</translation>
3634         </message>
3635         <message>
3636             <source>GEOM_STATE_ONOUT</source>
3637             <translation>ONOUT</translation>
3638         </message>
3639         <message>
3640             <source>GEOM_STATE_INOUT</source>
3641             <translation>INOUT</translation>
3642         </message>
3643         <message>
3644             <source>TOP_GET_SHAPES_ON_SHAPES</source>
3645             <translation>Get shapes on shape</translation>
3646         </message>
3647         <message>
3648             <source>MEN_GET_SHAPES_ON_SHAPES</source>
3649             <translation>Get shapes on shape</translation>
3650         </message>
3651         <message>
3652             <source>STB_GET_SHAPES_ON_SHAPES</source>
3653             <translation>Get shapes on shape</translation>
3654         </message>
3655         <message>
3656             <source>GEOM_PUBLISH_RESULT_GRP</source>
3657             <translation>Advanced options</translation>
3658         </message>
3659         <message>
3660             <source>GEOM_RESTORE_SUB_SHAPES</source>
3661             <translation>Set presentation parameters and subshapes from arguments</translation>
3662         </message>
3663         <message>
3664             <source>GEOM_ALL_IMPORT_FILES</source>
3665             <translation>All supported formats ( %1 )</translation>
3666         </message>
3667         <message>
3668             <source>GEOM_UNSUPPORTED_TYPE</source>
3669             <translation>Unsupported format for the file</translation>
3670         </message>
3671         <message>
3672             <source>GEOM_UNKNOWN_IMPORT_ERROR</source>
3673             <translation>Unknown error</translation>
3674         </message>
3675         <message>
3676             <source>GEOM_IMPORT_ERRORS</source>
3677             <translation>Import operation has finished with errors:</translation>
3678         </message>
3679     </context>
3680     <context>
3681         <name>BasicGUI_MarkerDlg</name>
3682         <message>
3683             <source>CAPTION</source>
3684             <translation>Local CS Construction</translation>
3685         </message>
3686         <message>
3687             <source>DX</source>
3688             <translation>Dx</translation>
3689         </message>
3690         <message>
3691             <source>DY</source>
3692             <translation>Dy</translation>
3693         </message>
3694         <message>
3695             <source>DZ</source>
3696             <translation>Dz</translation>
3697         </message>
3698         <message>
3699             <source>LCS_NAME</source>
3700             <translation>LocalCS</translation>
3701         </message>
3702         <message>
3703             <source>LOCALCS</source>
3704             <translation>Local coordinate system</translation>
3705         </message>
3706         <message>
3707             <source>ORIGIN</source>
3708             <translation>Coordinates of origin</translation>
3709         </message>
3710         <message>
3711             <source>VEC_PARALLEL</source>
3712             <translation>Coordinate system axes cannot be parallel</translation>
3713         </message>
3714         <message>
3715             <source>XDIR</source>
3716             <translation>X axis direction</translation>
3717         </message>
3718         <message>
3719             <source>YDIR</source>
3720             <translation>Y axis direction</translation>
3721         </message>
3722     </context>
3723     <context>
3724         <name>BlocksGUI_BlockDlg</name>
3725         <message>
3726             <source>FACE_1</source>
3727             <translation>Face 1</translation>
3728         </message>
3729         <message>
3730             <source>FACE_2</source>
3731             <translation>Face 2</translation>
3732         </message>
3733         <message>
3734             <source>FACE_3</source>
3735             <translation>Face 3</translation>
3736         </message>
3737         <message>
3738             <source>FACE_4</source>
3739             <translation>Face 4</translation>
3740         </message>
3741         <message>
3742             <source>FACE_5</source>
3743             <translation>Face 5</translation>
3744         </message>
3745         <message>
3746             <source>FACE_6</source>
3747             <translation>Face 6</translation>
3748         </message>
3749     </context>
3750     <context>
3751         <name>BlocksGUI_ExplodeDlg</name>
3752         <message>
3753             <source>NB_FACES_MAX</source>
3754             <translation>Max. nb. faces</translation>
3755         </message>
3756         <message>
3757             <source>NB_FACES_MIN</source>
3758             <translation>Min. nb. faces</translation>
3759         </message>
3760     </context>
3761     <context>
3762         <name>BlocksGUI_QuadFaceDlg</name>
3763         <message>
3764             <source>EDGE_1</source>
3765             <translation>Edge 1</translation>
3766         </message>
3767         <message>
3768             <source>EDGE_2</source>
3769             <translation>Edge 2</translation>
3770         </message>
3771         <message>
3772             <source>EDGE_3</source>
3773             <translation>Edge 3</translation>
3774         </message>
3775         <message>
3776             <source>EDGE_4</source>
3777             <translation>Edge 4</translation>
3778         </message>
3779         <message>
3780             <source>VERTEX_1</source>
3781             <translation>Vertex 1</translation>
3782         </message>
3783         <message>
3784             <source>VERTEX_2</source>
3785             <translation>Vertex 2</translation>
3786         </message>
3787         <message>
3788             <source>VERTEX_3</source>
3789             <translation>Vertex 3</translation>
3790         </message>
3791         <message>
3792             <source>VERTEX_4</source>
3793             <translation>Vertex 4</translation>
3794         </message>
3795     </context>
3796     <context>
3797         <name>BlocksGUI_TrsfDlg</name>
3798         <message>
3799             <source>FACE_1</source>
3800             <translation>Face 1</translation>
3801         </message>
3802         <message>
3803             <source>FACE_1U</source>
3804             <translation>Face 1 U</translation>
3805         </message>
3806         <message>
3807             <source>FACE_1V</source>
3808             <translation>Face 1 V</translation>
3809         </message>
3810         <message>
3811             <source>FACE_2</source>
3812             <translation>Face 2</translation>
3813         </message>
3814         <message>
3815             <source>FACE_2U</source>
3816             <translation>Face 2 U</translation>
3817         </message>
3818         <message>
3819             <source>FACE_2V</source>
3820             <translation>Face 2 V</translation>
3821         </message>
3822     </context>
3823     <context>
3824         <name>EntityGUI_SketcherDlg</name>
3825         <message>
3826             <source>CANNOT_CLOSE</source>
3827             <translation>It is impossible to close sketch
3828 Number of sketch points too small</translation>
3829         </message>
3830     </context>
3831     <context>
3832         <name>EntityGUI_SubShapeDlg</name>
3833         <message>
3834             <source>NO_SUBSHAPES_SELECTED</source>
3835             <translation>Please, select one or more sub-shapes</translation>
3836         </message>
3837     </context>
3838     <context>
3839         <name>GroupGUI</name>
3840         <message>
3841             <source>NO_GROUP</source>
3842             <translation>Please, select a group to edit</translation>
3843         </message>
3844     </context>
3845     <context>
3846         <name>GroupGUI_GroupDlg</name>
3847         <message>
3848             <source>ADD</source>
3849             <translation>Add</translation>
3850         </message>
3851         <message>
3852             <source>CREATE_GROUP_TITLE</source>
3853             <translation>Create Group</translation>
3854         </message>
3855         <message>
3856             <source>EDIT_GROUP_TITLE</source>
3857             <translation>Edit Group</translation>
3858         </message>
3859         <message>
3860             <source>EMPTY_LIST</source>
3861             <translation>Please, select one or more sub-shapes to put into the group</translation>
3862         </message>
3863         <message>
3864             <source>EMPTY_NAME</source>
3865             <translation>Please, specify a non-empty group name</translation>
3866         </message>
3867         <message>
3868             <source>GROUP_NAME</source>
3869             <translation>Group Name</translation>
3870         </message>
3871         <message>
3872             <source>GROUP_PREFIX</source>
3873             <translation>Group</translation>
3874         </message>
3875         <message>
3876             <source>MAIN_SHAPE</source>
3877             <translation>Main Shape</translation>
3878         </message>
3879         <message>
3880             <source>MAIN_SUB_SHAPES</source>
3881             <translation>Main Shape And Sub-Shapes</translation>
3882         </message>
3883         <message>
3884             <source>NO_GROUP</source>
3885             <translation>Please, select a group to edit</translation>
3886         </message>
3887         <message>
3888             <source>NO_MAIN_OBJ</source>
3889             <translation>Please, select a main shape</translation>
3890         </message>
3891         <message>
3892             <source>REMOVE</source>
3893             <translation>Remove</translation>
3894         </message>
3895         <message>
3896             <source>SELECT_ALL</source>
3897             <translation>Select All</translation>
3898         </message>
3899         <message>
3900             <source>SHAPE_SEL_RESTR</source>
3901             <translation>Main Shape Selection restriction</translation>
3902         </message>
3903         <message>
3904             <source>SHAPE_TYPE</source>
3905             <translation>Shape Type</translation>
3906         </message>
3907         <message>
3908             <source>NO_RESTR</source>
3909             <translation>No restriction</translation>
3910         </message>
3911         <message>
3912             <source>GEOM_PARTS_OF_SHAPE2</source>
3913             <translation>Geometrical parts of the Second Shape</translation>
3914         </message>
3915         <message>
3916             <source>SUBSHAPES_OF_SHAPE2</source>
3917             <translation>Only Sub-Shapes of the Second Shape</translation>
3918         </message>
3919         <message>
3920             <source>SECOND_SHAPE</source>
3921             <translation>Second Shape</translation>
3922         </message>
3923     </context>
3924     <context>
3925         <name>MeasureGUI_1Sel1TextView1Check_QTD</name>
3926         <message>
3927             <source>CHECK_SHAPE_GEOMETRY</source>
3928             <translation>Check also geometry</translation>
3929         </message>
3930     </context>
3931     <context>
3932         <name>MeasureGUI_PointDlg</name>
3933         <message>
3934             <source>CAPTION</source>
3935             <translation>Point Coordinates</translation>
3936         </message>
3937         <message>
3938             <source>COORDINATES</source>
3939             <translation>Point and its coordinates</translation>
3940         </message>
3941         <message>
3942             <source>POINT</source>
3943             <translation>Point</translation>
3944         </message>
3945         <message>
3946             <source>X</source>
3947             <translation>X</translation>
3948         </message>
3949         <message>
3950             <source>Y</source>
3951             <translation>Y</translation>
3952         </message>
3953         <message>
3954             <source>Z</source>
3955             <translation>Z</translation>
3956         </message>
3957     </context>
3958     <context>
3959         <name>OperationGUI_ChamferDlg</name>
3960         <message>
3961             <source>D</source>
3962             <translation>D</translation>
3963         </message>
3964         <message>
3965             <source>FACE_1</source>
3966             <translation>Face 1</translation>
3967         </message>
3968         <message>
3969             <source>FACE_2</source>
3970             <translation>Face 2</translation>
3971         </message>
3972         <message>
3973             <source>SELECTED_FACES</source>
3974             <translation>Selected faces</translation>
3975         </message>
3976     </context>
3977     <context>
3978         <name>OperationGUI_FilletDlg</name>
3979         <message>
3980             <source>SELECTED_EDGES</source>
3981             <translation>Selected edges</translation>
3982         </message>
3983         <message>
3984             <source>SELECTED_FACES</source>
3985             <translation>Selected faces</translation>
3986         </message>
3987     </context>
3988     <context>
3989         <name>RepairGUI_FreeBoundDlg</name>
3990         <message>
3991             <source>CAPTION</source>
3992             <translation>Check free boundaries</translation>
3993         </message>
3994         <message>
3995             <source>FREE_BOUND</source>
3996             <translation>Free boundaries</translation>
3997         </message>
3998         <message>
3999             <source>NUMBER_CLOSED</source>
4000             <translation>Number of closed free boundaries: </translation>
4001         </message>
4002         <message>
4003             <source>NUMBER_OPEN</source>
4004             <translation>Number of open free boundaries: </translation>
4005         </message>
4006     </context>
4007     <context>
4008         <name>RepairGUI_GlueDlg</name>
4009         <message>
4010             <source>FACES_FOR_GLUING_ARE_DETECTED</source>
4011             <translation>There are %1 face(s) that can be glued. They are coloured on the screen with red colour.
4012 Please close this message box and select faces for glueing</translation>
4013         </message>
4014         <message>
4015             <source>GLUE_FACES</source>
4016             <translation>Glue faces</translation>
4017         </message>
4018         <message>
4019             <source>SELECT_FACES</source>
4020             <translation>Select Faces</translation>
4021         </message>
4022         <message>
4023             <source>THERE_ARE_NO_FACES_FOR_GLUING</source>
4024             <translation>There are no faces for gluing</translation>
4025         </message>
4026     </context>
4027     <context>
4028         <name>RepairGUI_ShapeProcessDlg</name>
4029         <message>
4030             <source>ERROR_NO_OBJECTS</source>
4031             <translation>Please, select a geometrical object for Shape Processing.</translation>
4032         </message>
4033         <message>
4034             <source>ERROR_NO_OPERATORS</source>
4035             <translation>Please, select at least one Shape Process operation to proceed.</translation>
4036         </message>
4037         <message>
4038             <source>TIME_CONSUMING</source>
4039             <translation>Enabling this option may result in a very time-consuming operation for some input shapes.
4040 Would you like to continue?</translation>
4041         </message>
4042     </context>
4043     <context>
4044         <name>GEOMToolsGUI_DeleteDlg</name>
4045         <message>
4046             <source>GEOM_REALLY_DELETE</source>
4047             <translation>Do you really want to delete %1 object(s)?</translation>
4048         </message>
4049         <message>
4050             <source>GEOM_REALLY_DELETE_ALL</source>
4051             <translation>Do you really want to delete all objects?</translation>
4052         </message>
4053         <message>
4054             <source>GEOM_DELETE_OBJECTS</source>
4055             <translation>Delete objects</translation>
4056         </message>
4057     </context>
4058 </TS>