3 Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
5 Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
6 CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
8 This library is free software; you can redistribute it and/or
9 modify it under the terms of the GNU Lesser General Public
10 License as published by the Free Software Foundation; either
11 version 2.1 of the License.
13 This library is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 Lesser General Public License for more details.
18 You should have received a copy of the GNU Lesser General Public
19 License along with this library; if not, write to the Free Software
20 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
29 <source>CHANGE_ORIENTATION_NEW_OBJ_NAME</source>
30 <translation>Invert</translation>
33 <source>CLOSE_CONTOUR_NEW_OBJ_NAME</source>
34 <translation>CloseContour</translation>
37 <source>DEP_OBJECT</source>
38 <translation>Selected object has been used to create another one.
39 It can't be deleted </translation>
42 <source>DEVIDE_EDGE_NEW_OBJECT_NAME</source>
43 <translation>NewObject</translation>
46 <source>ERROR_SHAPE_TYPE</source>
47 <translation>Object of incorrect type selected!
48 Please, select face, shell or solid and try again</translation>
51 <source> iErr : 10</source>
52 <translation>the Classifier is NULL</translation>
55 <source> iErr : 11</source>
56 <translation>the Shape is NULL</translation>
59 <source> iErr : 12</source>
60 <translation>Unallowed Type of Subshape</translation>
63 <source> iErr : 13</source>
64 <translation>Unallowed State</translation>
67 <source> iErr : 15</source>
68 <translation>Unallowed Surface Type</translation>
71 <source> iErr : 20</source>
72 <translation>Triangulation is not Found</translation>
75 <source> iErr : 30</source>
76 <translation>Can not Obtain the Line From the Link</translation>
79 <source> iErr : 40</source>
80 <translation>A Point Can Not Be Classified</translation>
83 <source> iErr : 41</source>
84 <translation>Invalid Data for Classifier</translation>
87 <source>GEOM_2D_CONTINUTY</source>
88 <translation>2D continuity</translation>
91 <source>GEOM_2D_CURVE_MODE</source>
92 <translation>2D curve mode</translation>
95 <source>GEOM_2D_TOLERANCE</source>
96 <translation>2D tolerance</translation>
99 <source>GEOM_3D_CONTINUTY</source>
100 <translation>3D continuity</translation>
103 <source>GEOM_3D_CURVE_MODE</source>
104 <translation>3D curve mode</translation>
107 <source>GEOM_3D_TOLERANCE</source>
108 <translation>3D tolerance</translation>
111 <source>GEOM_3_POINTS</source>
112 <translation>3 points</translation>
115 <source>GEOM_ADD_POINT</source>
116 <translation>Add point</translation>
119 <source>GEOM_ANGLE</source>
120 <translation>Angle :</translation>
123 <source>GEOM_ANGLE_1</source>
124 <translation>Angle</translation>
127 <source>GEOM_ARC</source>
128 <translation>Arc</translation>
131 <source>GEOM_ARCHIMEDE</source>
132 <translation>Archimede</translation>
135 <source>GEOM_ARCHIMEDE_TITLE</source>
136 <translation>Archimede Construction</translation>
139 <source>GEOM_ARC_TITLE</source>
140 <translation>Arc Construction</translation>
143 <source>GEOM_ARGUMENTS</source>
144 <translation>Arguments</translation>
147 <source>GEOM_AXE_MIRROR</source>
148 <translation>Axe Mirror</translation>
151 <source>GEOM_AXIS</source>
152 <translation>Axis</translation>
155 <source>GEOM_BASE</source>
156 <translation>Base</translation>
159 <source>GEOM_BASE_OBJECT</source>
160 <translation>Base Object</translation>
163 <source>GEOM_BASE_POINT</source>
164 <translation>Base Point</translation>
167 <source>GEOM_BEZIER</source>
168 <translation>Bezier</translation>
171 <source>GEOM_BINORMAL</source>
172 <translation>BiNormal</translation>
175 <source>GEOM_BLOCK</source>
176 <translation>Hexahedral Solid</translation>
179 <source>GEOM_BLOCKS_COMPOUND</source>
180 <translation>BlocksCompound</translation>
183 <source>GEOM_BLOCK_EXPLODE</source>
184 <translation>Sub Blocks</translation>
187 <source>GEOM_BLOCK_EXPLODE_TITLE</source>
188 <translation>Sub Blocks Selection</translation>
191 <source>GEOM_BLOCK_MULTITRSF</source>
192 <translation>Block Multi-Transformation</translation>
195 <source>GEOM_BLOCK_MULTITRSF_DOUBLE</source>
196 <translation>Multi-Transformation Double</translation>
199 <source>GEOM_BLOCK_MULTITRSF_SIMPLE</source>
200 <translation>Multi-Transformation Simple</translation>
203 <source>GEOM_BLOCK_MULTITRSF_TITLE</source>
204 <translation>Block Multi-Transformation</translation>
207 <source>GEOM_BLOCK_TITLE</source>
208 <translation>Hexahedral Solid Construction</translation>
211 <source>GEOM_BNDBOX</source>
212 <translation>Bounding Box</translation>
215 <source>GEOM_BNDBOX_OBJDIM</source>
216 <translation>Object And Its Dimensions</translation>
219 <source>GEOM_BNDBOX_TITLE</source>
220 <translation>Bounding Box Information</translation>
223 <source>GEOM_BOX</source>
224 <translation>Box</translation>
227 <source>GEOM_BOX_OBJ</source>
228 <translation>Dimensions At Origin</translation>
231 <source>GEOM_BOX_TITLE</source>
232 <translation>Box Construction</translation>
235 <source>GEOM_BSplineRestriction</source>
236 <translation>BSplineRestriction</translation>
239 <source>GEOM_BUT_APPLY</source>
240 <translation>&Apply</translation>
243 <source>GEOM_BUT_CANCEL</source>
244 <translation>&Cancel</translation>
247 <source>GEOM_BUT_CLOSE</source>
248 <translation>&Close</translation>
251 <source>GEOM_BUT_CLOSE_SKETCH</source>
252 <translation>Sketch Closure</translation>
255 <source>GEOM_BUT_END_SKETCH</source>
256 <translation>Sketch Validation</translation>
259 <source>GEOM_BUT_EXPLODE</source>
260 <translation>&Explode</translation>
263 <source>GEOM_BUT_HELP</source>
264 <translation>&Help</translation>
267 <source>GEOM_BUT_NO</source>
268 <translation>&No</translation>
271 <source>GEOM_BUT_OK</source>
272 <translation>O&k</translation>
275 <source>GEOM_BUT_APPLY_AND_CLOSE</source>
276 <translation>A&pply and Close</translation>
279 <source>GEOM_BUT_YES</source>
280 <translation>&Yes</translation>
283 <source>GEOM_BY_LENGTH</source>
284 <translation>By length</translation>
287 <source>GEOM_BY_PARAMETER</source>
288 <translation>By parameter</translation>
291 <source>GEOM_CENTER</source>
292 <translation>Center</translation>
295 <source>GEOM_CENTER_POINT</source>
296 <translation>Center Point</translation>
299 <source>GEOM_CENTRAL_POINT</source>
300 <translation>Central Point</translation>
303 <source>GEOM_CHAMFER</source>
304 <translation>Chamfer</translation>
307 <source>GEOM_CHAMFER_ABORT</source>
308 <translation>Chamfer can't be computed with %1 and %2</translation>
311 <source>GEOM_CHAMFER_ALL</source>
312 <translation>Chamfer On Whole Shape</translation>
315 <source>GEOM_CHAMFER_EDGES</source>
316 <translation>Chamfer On Edges From Shape</translation>
319 <source>GEOM_CHAMFER_FACES</source>
320 <translation>Chamfer On Faces From Shape</translation>
323 <source>GEOM_CHAMFER_TITLE</source>
324 <translation>Chamfer Construction</translation>
327 <source>GEOM_CHANGE_ORIENTATION</source>
328 <translation>Objects to change orientation</translation>
331 <source>GEOM_CHANGE_ORIENTATION_TITLE</source>
332 <translation>Change orientation</translation>
335 <source>GEOM_CHECK_BLOCKS_COMPOUND</source>
336 <translation>Check and Improve Blocks Compound</translation>
339 <source>GEOM_CHECK_BLOCKS_COMPOUND_ERRORS</source>
340 <translation>Errors</translation>
343 <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS</source>
344 <translation>The Compound of Blocks has errors</translation>
347 <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS</source>
348 <translation>The Compound of Blocks has no errors</translation>
351 <source>GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES</source>
352 <translation>Incriminated Sub-Shapes</translation>
355 <source>GEOM_CHECK_INFOS</source>
356 <translation>Object And Its Topological Information</translation>
359 <source>GEOM_CHECK_SHAPE</source>
360 <translation>Check Shape</translation>
363 <source>GEOM_CHECK_TITLE</source>
364 <translation>Check Shape Information</translation>
367 <source>GEOM_CIRCLE</source>
368 <translation>Circle</translation>
371 <source>GEOM_CIRCLE_TITLE</source>
372 <translation>Circle Construction</translation>
375 <source>GEOM_CLOSECONTOUR_TITLE</source>
376 <translation>Close contour</translation>
379 <source>GEOM_CMASS</source>
380 <translation>Center Of Mass</translation>
383 <source>GEOM_CMASS_TITLE</source>
384 <translation>Center Of Mass Construction</translation>
387 <source>GEOM_COMMON</source>
388 <translation>Common</translation>
391 <source>GEOM_COMMON_TITLE</source>
392 <translation>Common Of Two Objects</translation>
395 <source>GEOM_COMPOUND</source>
396 <translation>Compound</translation>
399 <source>GEOM_COMPOUNDSOLID</source>
400 <translation>CompSolid</translation>
403 <source>GEOM_COMPOUND_TITLE</source>
404 <translation>Create A Compound</translation>
407 <source>GEOM_CONE</source>
408 <translation>Cone</translation>
411 <source>GEOM_CONE_TITLE</source>
412 <translation>Cone Construction</translation>
415 <source>GEOM_CONFIRM</source>
416 <translation>Confirm operation</translation>
419 <source>GEOM_CONFIRM_INFO</source>
420 <translation>Shape contains %1 sub shapes !</translation>
423 <source>GEOM_COOR</source>
424 <translation>Coord. :</translation>
427 <source>GEOM_COORDINATES</source>
428 <translation>Coordinates</translation>
431 <source>GEOM_CREATE_COPY</source>
432 <translation>Create a copy</translation>
435 <source>GEOM_CREATE_SINGLE_SOLID</source>
436 <translation>Create a single solid</translation>
439 <source>GEOM_CURVE</source>
440 <translation>Curve</translation>
443 <source>GEOM_CURVE_CONTINUTY</source>
444 <translation>Curve continuity</translation>
447 <source>GEOM_CURVE_TITLE</source>
448 <translation>Curve Construction</translation>
451 <source>GEOM_CUT</source>
452 <translation>Cut</translation>
455 <source>GEOM_CUT_TITLE</source>
456 <translation>Cut Of Two Objects</translation>
459 <source>GEOM_CYLINDER</source>
460 <translation>Cylinder</translation>
463 <source>GEOM_CYLINDER_TITLE</source>
464 <translation>Cylinder Construction</translation>
467 <source>GEOM_D1</source>
468 <translation>D1 :</translation>
471 <source>GEOM_D2</source>
472 <translation>D2 :</translation>
475 <source>GEOM_DETECT</source>
476 <translation>Detect</translation>
479 <source>GEOM_DIAGONAL_POINTS</source>
480 <translation>Diagonal Points</translation>
483 <source>GEOM_DISK</source>
484 <translation>Disk</translation>
487 <source>GEOM_DISK_TITLE</source>
488 <translation>Create A Disk</translation>
491 <source>GEOM_DIMENSIONS</source>
492 <translation>Dimensions</translation>
495 <source>GEOM_DISTANCE</source>
496 <translation>Distance</translation>
499 <source>GEOM_DIVIDE_EDGE_TITLE</source>
500 <translation>Addition of point</translation>
503 <source>GEOM_DX</source>
504 <translation>Dx :</translation>
507 <source>GEOM_DY</source>
508 <translation>Dy :</translation>
511 <source>GEOM_DZ</source>
512 <translation>Dz :</translation>
515 <source>GEOM_DropSmallEdges</source>
516 <translation>DropSmallEdges</translation>
519 <source>GEOM_EDGE</source>
520 <translation>Edge</translation>
523 <source>GEOM_EDGE_TITLE</source>
524 <translation>Create An Edge</translation>
527 <source>GEOM_ELLIPSE</source>
528 <translation>Ellipse</translation>
531 <source>GEOM_ELLIPSE_ERROR_1</source>
532 <translation>Error creating ellipse. Reason: minor radius is greater than major radius.</translation>
535 <source>GEOM_ELLIPSE_TITLE</source>
536 <translation>Ellipse Construction</translation>
539 <source>GEOM_END_LCS</source>
540 <translation>End LCS</translation>
543 <source>GEOM_ERROR</source>
544 <translation>Error</translation>
547 <source>GEOM_ERROR_STATUS</source>
548 <translation>Operation status</translation>
551 <source>GEOM_ERR_GET_ENGINE</source>
552 <translation>Failed to obtain GEOM Engine component. Reload Geometry module and try again.</translation>
555 <source>GEOM_ERR_LIB_NOT_FOUND</source>
556 <translation>GUI library corresponding to the user action can not be found or loaded</translation>
559 <source>GEOM_EXTRUSION</source>
560 <translation>Extrusion</translation>
563 <source>GEOM_EXTRUSION_BSV</source>
564 <translation>Base Shape + Vector</translation>
567 <source>GEOM_EXTRUSION_BSV_2P</source>
568 <translation>Base Shape + 2 Points</translation>
571 <source>GEOM_EXTRUSION_DXDYDZ</source>
572 <translation>Base Shape + DX DY DZ Vector</translation>
575 <source>GEOM_EXTRUSION_TITLE</source>
576 <translation>Construction by Extrusion</translation>
579 <source>GEOM_FACE</source>
580 <translation>Face</translation>
583 <source>GEOM_LCS</source>
584 <translation>Local coordinate system</translation>
587 <source>GEOM_FACES</source>
588 <translation>Faces</translation>
591 <source>GEOM_FACE_FFW</source>
592 <translation>Face creation from wires and/or edges</translation>
595 <source>GEOM_FACE_OPT</source>
596 <translation>Try to create a planar face</translation>
599 <source>GEOM_FACE_OR_LCS</source>
600 <translation>Face or LCS</translation>
603 <source>GEOM_FACE_SELECTION</source>
604 <translation>Face Selection</translation>
607 <source>GEOM_FACE_TITLE</source>
608 <translation>Create A Face</translation>
611 <source>GEOM_FILLET</source>
612 <translation>Fillet</translation>
615 <source>GEOM_FILLET_2D</source>
616 <translation>Fillet 2D</translation>
619 <source>GEOM_FILLET_ABORT</source>
620 <translation>Fillet can't be computed with radius %1</translation>
623 <source>GEOM_FILLET_ALL</source>
624 <translation>Fillet On Whole Shape</translation>
627 <source>GEOM_FILLET_EDGES</source>
628 <translation>Fillet On Edges From Shape</translation>
631 <source>GEOM_FILLET_FACES</source>
632 <translation>Fillet On Faces From Shape</translation>
635 <source>GEOM_FILLET_VERTEXES</source>
636 <translation>Fillet On Vertexes From Face</translation>
639 <source>GEOM_FILLET_TITLE</source>
640 <translation>Fillet Construction</translation>
643 <source>GEOM_FILLET_2D_TITLE</source>
644 <translation>2D Fillet Construction</translation>
647 <source>GEOM_FILLING</source>
648 <translation>Filling</translation>
651 <source>GEOM_FILLING_ARG</source>
652 <translation>Arguments And Parameters</translation>
655 <source>GEOM_FILLING_COMPOUND</source>
656 <translation>Edges compound</translation>
659 <source>GEOM_FILLING_MAX_DEG</source>
660 <translation>Max deg</translation>
663 <source>GEOM_FILLING_MIN_DEG</source>
664 <translation>Min deg</translation>
667 <source>GEOM_FILLING_NB_ITER</source>
668 <translation>Nb. Iter :</translation>
671 <source>GEOM_FILLING_TITLE</source>
672 <translation>Filling Surface With Edges</translation>
675 <source>GEOM_FILLING_TOL_2D</source>
676 <translation>Tol. 2D :</translation>
679 <source>GEOM_FILLING_TOL_3D</source>
680 <translation>Tol. 3D :</translation>
683 <source>GEOM_FREE_BOUNDARIES</source>
684 <translation>Free boundaries</translation>
687 <source>GEOM_FREE_BOUNDS_ERROR</source>
688 <translation>Object is not selected</translation>
691 <source>GEOM_FREE_BOUNDS_MSG</source>
692 <translation>Number of free boundaries detected: %1 (%2 closed, %3 open)</translation>
695 <source>GEOM_FREE_BOUNDS_TLT</source>
696 <translation>Free boundary detection</translation>
699 <source>GEOM_FREE_FACES</source>
700 <translation>Free faces</translation>
703 <source>GEOM_FREE_FACES_TITLE</source>
704 <translation>Free faces</translation>
707 <source>GEOM_FUSE</source>
708 <translation>Fuse</translation>
711 <source>GEOM_FUSE_TITLE</source>
712 <translation>Fuse Two Objects</translation>
715 <source>GEOM_FixFaceSize</source>
716 <translation>FixFaceSize</translation>
719 <source>GEOM_FixShape</source>
720 <translation>FixShape</translation>
723 <source>GEOM_GLUE</source>
724 <translation>Glue</translation>
727 <source>GEOM_GLUE_TITLE</source>
728 <translation>Glue faces</translation>
731 <source>GEOM_HEIGHT</source>
732 <translation>Height :</translation>
735 <source>GEOM_HOLES</source>
736 <translation>Holes</translation>
739 <source>GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE</source>
740 <translation>Identical names : select by mouse !</translation>
743 <source>GEOM_IMPORT</source>
744 <translation>Imported_Shape</translation>
747 <source>GEOM_INCORRECT_INPUT</source>
748 <translation>Incorrect Input Data!</translation>
751 <source>GEOM_INERTIA_CONSTR</source>
752 <translation>Matrix And Moments Of Inertia</translation>
755 <source>GEOM_INERTIA_I</source>
756 <translation>%1:1 :</translation>
759 <source>GEOM_INERTIA_IXYZ</source>
760 <translation>IX & IY & IZ :</translation>
763 <source>GEOM_INERTIA_TITLE</source>
764 <translation>Calculs Of Inertia</translation>
767 <source>GEOM_INF_LOADED</source>
768 <translation>File %1 loaded.</translation>
771 <source>GEOM_INTERNAL_WIRES</source>
772 <translation>Internal wires</translation>
775 <source>GEOM_INTERPOL</source>
776 <translation>Interpolation</translation>
779 <source>GEOM_KEEP_OBJECT</source>
780 <translation>Keep Object</translation>
783 <source>GEOM_LENGTH</source>
784 <translation>Length :</translation>
787 <source>GEOM_LINE</source>
788 <translation>Line</translation>
791 <source>GEOM_LINE_TITLE</source>
792 <translation>Line Construction</translation>
795 <source>GEOM_MAIN_OBJECT</source>
796 <translation>Main Object</translation>
799 <source>GEOM_MARKER</source>
800 <translation>Marker</translation>
803 <source>GEOM_MARKER_TITLE</source>
804 <translation>Create marker</translation>
807 <source>GEOM_MATERIAL_ID</source>
808 <translation>Material ID:</translation>
811 <source>GEOM_MATERIAL_MATERIAL</source>
812 <translation>Material</translation>
815 <source>GEOM_MATERIAL_SET</source>
816 <translation><< Set</translation>
819 <source>GEOM_MATERIAL_SHAPE</source>
820 <translation>Shapes</translation>
823 <source>GEOM_MATERIAL_TITLE</source>
824 <translation>Define materials for Dominant Fuse</translation>
827 <source>GEOM_MATRIX</source>
828 <translation>Matrix :</translation>
831 <source>GEOM_MAX</source>
832 <translation>Max :</translation>
835 <source>GEOM_MAX_3D_TOLERANCE</source>
836 <translation>Max 3D tolerance</translation>
839 <source>GEOM_MAX_TOLERANCE</source>
840 <translation>Max tolerance</translation>
843 <source>GEOM_MEN_ALL_FILES</source>
844 <translation>All Files ( * )</translation>
847 <source>GEOM_MEN_ANGLE</source>
848 <translation>Angle :</translation>
851 <source>GEOM_MEN_COMPONENT</source>
852 <translation>Geometry</translation>
855 <source>GEOM_MEN_ENTER_ANGLE</source>
856 <translation>Enter An Angle In Degrees</translation>
859 <source>GEOM_MEN_EXPORT</source>
860 <translation>Export</translation>
863 <source>GEOM_MEN_IMPORT</source>
864 <translation>Import</translation>
867 <source>GEOM_MEN_ISOS</source>
868 <translation>Select Number Of Isos</translation>
871 <source>GEOM_MEN_ISOU</source>
872 <translation>Isos U :</translation>
875 <source>GEOM_MEN_ISOV</source>
876 <translation>Isos V :</translation>
879 <source>GEOM_MEN_POPUP_NAME</source>
880 <translation>%1 Objects</translation>
883 <source>GEOM_MEN_SHADING</source>
884 <translation>Shading</translation>
887 <source>GEOM_MEN_SKETCHER_X</source>
888 <translation>Enter a Length to Set X</translation>
891 <source>GEOM_MEN_SKETCHER_Y</source>
892 <translation>Enter a Length to Set Y</translation>
895 <source>GEOM_MEN_STEP_LABEL</source>
896 <translation>Step :</translation>
899 <source>GEOM_MEN_TRANSPARENCY</source>
900 <translation>Transparency</translation>
903 <source>GEOM_MEN_TRANSPARENCY_LABEL</source>
904 <translation>Transparency :</translation>
907 <source>GEOM_MEN_WIREFRAME</source>
908 <translation>Wireframe</translation>
911 <source>GEOM_MEN_X</source>
912 <translation>X :</translation>
915 <source>GEOM_MEN_Y</source>
916 <translation>Y :</translation>
919 <source>GEOM_MESHING_DEFLECTION</source>
920 <translation>Meshing Deflect. :</translation>
923 <source>GEOM_MIN</source>
924 <translation>Min :</translation>
927 <source>GEOM_MINDIST_OBJ</source>
928 <translation>Objects And Results</translation>
931 <source>GEOM_MINDIST_TITLE</source>
932 <translation>Minimun Distance Between Two Objects</translation>
935 <source>GEOM_MIRROR</source>
936 <translation>Mirror</translation>
939 <source>GEOM_MIRROR_TITLE</source>
940 <translation>Mirror An Object</translation>
943 <source>GEOM_MULTIROTATION</source>
944 <translation>Multi-Rotation</translation>
947 <source>GEOM_MULTIROTATION_DOUBLE</source>
948 <translation>Multi Rotation Double</translation>
951 <source>GEOM_MULTIROTATION_SIMPLE</source>
952 <translation>Multi Rotation Simple</translation>
955 <source>GEOM_MULTIROTATION_TITLE</source>
956 <translation>Multi-Rotation</translation>
959 <source>GEOM_MULTITRANSLATION</source>
960 <translation>Multi-Translation</translation>
963 <source>GEOM_MULTITRANSLATION_DOUBLE</source>
964 <translation>Multi Translation Double</translation>
967 <source>GEOM_MULTITRANSLATION_SIMPLE</source>
968 <translation>Multi Translation Simple</translation>
971 <source>GEOM_MULTITRANSLATION_TITLE</source>
972 <translation>Multi-Translation</translation>
975 <source>GEOM_NAME_INCORRECT</source>
976 <translation>Object name not found</translation>
979 <source>GEOM_NB_BLOCKS_NO_OTHERS</source>
980 <translation>There are %1 specified blocks and NO other solids</translation>
983 <source>GEOM_NB_BLOCKS_SOME_OTHERS</source>
984 <translation>There are %1 specified blocks and some other solids</translation>
987 <source>GEOM_NB_TIMES</source>
988 <translation>Nb. Times :</translation>
991 <source>GEOM_NB_TIMES_U</source>
992 <translation>Nb. Times U :</translation>
995 <source>GEOM_NB_TIMES_V</source>
996 <translation>Nb. Times V :</translation>
999 <source>GEOM_NODES</source>
1000 <translation>Nodes</translation>
1003 <source>GEOM_NUM_SPLIT_POINTS</source>
1004 <translation>Number of splitting points</translation>
1007 <source>GEOM_OBJECT</source>
1008 <translation>Object</translation>
1011 <source>GEOM_OBJECT_TYPE</source>
1012 <translation>Object Type</translation>
1015 <source>GEOM_OBJECTS</source>
1016 <translation>Objects</translation>
1019 <source>GEOM_OBJECT_I</source>
1020 <translation>Object %1</translation>
1023 <source>GEOM_OBJECT_RESULT</source>
1024 <translation>Object And Result</translation>
1027 <source>GEOM_OFFSET</source>
1028 <translation>Offset</translation>
1031 <source>GEOM_OFFSET_TITLE</source>
1032 <translation>Offset Surface</translation>
1035 <source>GEOM_OPERATIONS</source>
1036 <translation>Operations</translation>
1039 <source>GEOM_ORIENTATION</source>
1040 <translation>Orientation</translation>
1043 <source>GEOM_ORIENTATION_OPT</source>
1044 <translation>Reverse orientation with normal vectors simulation</translation>
1047 <source>GEOM_ORIENTATION_TITLE</source>
1048 <translation>Change Orientation</translation>
1051 <source>GEOM_PARAMETER</source>
1052 <translation>Parameter :</translation>
1055 <source>GEOM_PARAMETERS</source>
1056 <translation>Parameters</translation>
1059 <source>GEOM_PARAM_POINT</source>
1060 <translation>Parametric point</translation>
1063 <source>GEOM_PARTITION</source>
1064 <translation>Partition</translation>
1067 <source>GEOM_PARTITION_HALFSPACE</source>
1068 <translation>Half-space partition</translation>
1071 <source>GEOM_PARTITION_ORIENTATION</source>
1072 <translation>Change Orientation</translation>
1075 <source>GEOM_PARTITION_TITLE</source>
1076 <translation>Partition Of Object With Tool</translation>
1079 <source>GEOM_PATH_OBJECT</source>
1080 <translation>Path Object</translation>
1083 <source>GEOM_PIPE</source>
1084 <translation>Pipe</translation>
1087 <source>GEOM_PIPE_TITLE</source>
1088 <translation>Pipe Construction</translation>
1091 <source>GEOM_SELECT_UNPUBLISHED_EDGES</source>
1092 <translation>Select unpublished edges</translation>
1095 <source>GEOM_PLANE</source>
1096 <translation>Plane</translation>
1099 <source>GEOM_PLANE_MIRROR</source>
1100 <translation>Plane Mirror</translation>
1103 <source>GEOM_PLANE_PV</source>
1104 <translation>Point + Vector</translation>
1107 <source>GEOM_PLANE_PVC</source>
1108 <translation>Point + Coordinate Vector</translation>
1111 <source>GEOM_PLANE_SIZE</source>
1112 <translation>Size of plane :</translation>
1115 <source>GEOM_PLANE_TITLE</source>
1116 <translation>Plane Construction</translation>
1119 <source>GEOM_POINT</source>
1120 <translation>Point</translation>
1123 <source>GEOM_POINT1</source>
1124 <translation>Point 1</translation>
1127 <source>GEOM_POINT2</source>
1128 <translation>Point 2</translation>
1131 <source>GEOM_POINT3</source>
1132 <translation>Point 3</translation>
1135 <source>GEOM_POINTS</source>
1136 <translation>Points</translation>
1139 <source>GEOM_POINT_I</source>
1140 <translation>Point %1</translation>
1143 <source>GEOM_POINT_MIRROR</source>
1144 <translation>Point Mirror</translation>
1147 <source>GEOM_POINT_TITLE</source>
1148 <translation>Point Construction</translation>
1151 <source>GEOM_POLYLINE</source>
1152 <translation>Polyline</translation>
1155 <source>GEOM_POSITION</source>
1156 <translation>Location</translation>
1159 <source>GEOM_POSITION_TITLE</source>
1160 <translation>Modify the Location of an Object</translation>
1163 <source>GEOM_PRECISION</source>
1164 <translation>Precision :</translation>
1167 <source>GEOM_PROPAGATE</source>
1168 <translation>Propagate</translation>
1171 <source>GEOM_PROPAGATE_TITLE</source>
1172 <translation>Propagate</translation>
1175 <source>GEOM_PROPERTIES</source>
1176 <translation>Basic Properties</translation>
1179 <source>GEOM_PROPERTIES_CONSTR</source>
1180 <translation>Object And Its Properties</translation>
1183 <source>GEOM_PROPERTIES_SURFACE</source>
1184 <translation>Surface is :</translation>
1187 <source>GEOM_PROPERTIES_TITLE</source>
1188 <translation>Basic Properties Information</translation>
1191 <source>GEOM_PROPERTIES_VOLUME</source>
1192 <translation>Volume is :</translation>
1195 <source>GEOM_PRP_ABORT</source>
1196 <translation>Operation aborted</translation>
1199 <source>GEOM_PRP_COMMAND</source>
1200 <translation>No command associated with this id = %1.</translation>
1203 <source>GEOM_PRP_DONE</source>
1204 <translation>Operation done</translation>
1207 <source>GEOM_PRP_EXPORT</source>
1208 <translation>Exporting geometry to %1 ...</translation>
1211 <source>GEOM_PRP_LOADING</source>
1212 <translation>Loading %1 ...</translation>
1215 <source>GEOM_PRP_MIN_DIST</source>
1216 <translation>Min Distance not computed</translation>
1219 <source>GEOM_PRP_NOT_FOR_VTK_VIEWER</source>
1220 <translation>Not allowed in VTK viewer</translation>
1223 <source>GEOM_PRP_NULLSHAPE</source>
1224 <translation>Error, null or inappropriate shape !</translation>
1227 <source>GEOM_PRP_READY</source>
1228 <translation>Ready</translation>
1231 <source>GEOM_PRP_SELECT_EDGE</source>
1232 <translation>Select edges and click on Apply</translation>
1235 <source>GEOM_PRP_SELECT_FACE</source>
1236 <translation>Select faces to suppress and click on Ok/Apply</translation>
1239 <source>GEOM_PRP_SELECT_FIRST</source>
1240 <translation>Select main shape first</translation>
1243 <source>GEOM_PRP_SELECT_SUBSHAPES</source>
1244 <translation>Select Sub Shapes</translation>
1247 <source>GEOM_PRP_SHAPE_IN_STUDY</source>
1248 <translation>Main shape must be in the study before</translation>
1251 <source>GEOM_QUAD_FACE</source>
1252 <translation>Quadrangle Face</translation>
1255 <source>GEOM_QUAD_FACE_TITLE</source>
1256 <translation>Quadrangle Face Construction</translation>
1259 <source>GEOM_RADIUS</source>
1260 <translation>Radius :</translation>
1263 <source>GEOM_RADIUS_I</source>
1264 <translation>Radius %1 :</translation>
1267 <source>GEOM_RADIUS_MAJOR</source>
1268 <translation>Major radius :</translation>
1271 <source>GEOM_RADIUS_MINOR</source>
1272 <translation>Minor radius :</translation>
1275 <source>GEOM_RECONSTRUCTION_LIMIT</source>
1276 <translation>Resulting Type</translation>
1279 <source>GEOM_RECONSTRUCTION_LIMIT_EDGE</source>
1280 <translation>Edge</translation>
1283 <source>GEOM_RECONSTRUCTION_LIMIT_FACE</source>
1284 <translation>Face</translation>
1287 <source>GEOM_RECONSTRUCTION_LIMIT_SHAPE</source>
1288 <translation>Shape</translation>
1291 <source>GEOM_RECONSTRUCTION_LIMIT_SHELL</source>
1292 <translation>Shell</translation>
1295 <source>GEOM_RECONSTRUCTION_LIMIT_SOLID</source>
1296 <translation>Solid</translation>
1299 <source>GEOM_RECONSTRUCTION_LIMIT_VERTEX</source>
1300 <translation>Vertex</translation>
1303 <source>GEOM_RECONSTRUCTION_LIMIT_WIRE</source>
1304 <translation>Wire</translation>
1307 <source>GEOM_REF_POINT</source>
1308 <translation>Point with reference</translation>
1311 <source>GEOM_REMOVE_ALL_HOLES</source>
1312 <translation>Remove all holes</translation>
1315 <source>GEOM_REMOVE_ALL_INT_WIRES</source>
1316 <translation>Remove all internal wires</translation>
1319 <source>GEOM_REMOVE_HOLES_TITLE</source>
1320 <translation>Suppress holes</translation>
1323 <source>GEOM_REMOVE_INTERNAL_WIRES_TITLE</source>
1324 <translation>Suppress internal wires</translation>
1327 <source>GEOM_REMOVE_WEBS</source>
1328 <translation>Remove webs</translation>
1331 <source>GEOM_REQUIRED_DEGREE</source>
1332 <translation>Required degree</translation>
1335 <source>GEOM_REQUIRED_NUM_SEGMENTS</source>
1336 <translation>Required number of segments</translation>
1339 <source>GEOM_REVERSE</source>
1340 <translation>Reverse</translation>
1343 <source>GEOM_REVERSE_DIRECTION</source>
1344 <translation>Reverse Direction</translation>
1347 <source>GEOM_REVERSE_PLANE</source>
1348 <translation>Reverse the plane normal</translation>
1351 <source>GEOM_REVERSE_U</source>
1352 <translation>Reverse U</translation>
1355 <source>GEOM_REVERSE_V</source>
1356 <translation>Reverse V</translation>
1359 <source>GEOM_REVERSE_VECTOR</source>
1360 <translation>Reverse Vector</translation>
1363 <source>GEOM_REVOLUTION</source>
1364 <translation>Revolution</translation>
1367 <source>GEOM_REVOLUTION_TITLE</source>
1368 <translation>Construction By Revolution</translation>
1371 <source>GEOM_ROTATION</source>
1372 <translation>Rotation</translation>
1375 <source>GEOM_ROTATION_TITLE</source>
1376 <translation>Rotation Of An Object</translation>
1379 <source>GEOM_SCALE</source>
1380 <translation>Scale</translation>
1383 <source>GEOM_SCALE_FACTOR</source>
1384 <translation>Scale Factor :</translation>
1387 <source>GEOM_SCALE_TITLE</source>
1388 <translation>Scale An Object</translation>
1391 <source>GEOM_SECTION</source>
1392 <translation>Section</translation>
1395 <source>GEOM_SECTION_TITLE</source>
1396 <translation>Section Of Two Objects</translation>
1399 <source>GEOM_SELECTED_FACE</source>
1400 <translation>Selected face</translation>
1403 <source>GEOM_SELECTED_OBJECTS</source>
1404 <translation>Selected objects</translation>
1407 <source>GEOM_SELECTED_SHAPE</source>
1408 <translation>Selected shape</translation>
1411 <source>GEOM_SELECTION</source>
1412 <translation>Selection</translation>
1415 <source>GEOM_SET_MATERIALS</source>
1416 <translation>Set materials</translation>
1419 <source>GEOM_SEWING</source>
1420 <translation>Sewing</translation>
1423 <source>GEOM_SEWING_TITLE</source>
1424 <translation>Topological sewing</translation>
1427 <source>GEOM_SHAPE</source>
1428 <translation>Shape</translation>
1431 <source>GEOM_SHAPEPROCESS_TITLE</source>
1432 <translation>Shape Processing</translation>
1435 <source>GEOM_SHAPES</source>
1436 <translation>Shapes</translation>
1439 <source>GEOM_SHELL</source>
1440 <translation>Shell</translation>
1443 <source>GEOM_SHELLS</source>
1444 <translation>Shells</translation>
1447 <source>GEOM_SHELL_TITLE</source>
1448 <translation>Shell Construction</translation>
1451 <source>GEOM_SKETCHER_ABS</source>
1452 <translation>Absolute</translation>
1455 <source>GEOM_SKETCHER_ANGLE</source>
1456 <translation>Angle</translation>
1459 <source>GEOM_SKETCHER_ANGLE2</source>
1460 <translation>Angle :</translation>
1463 <source>GEOM_SKETCHER_APPLY</source>
1464 <translation>Apply</translation>
1467 <source>GEOM_SKETCHER_ARC</source>
1468 <translation>Arc</translation>
1471 <source>GEOM_SKETCHER_DEST</source>
1472 <translation>Destination</translation>
1475 <source>GEOM_SKETCHER_DIR</source>
1476 <translation>Direction</translation>
1479 <source>GEOM_SKETCHER_DX2</source>
1480 <translation>DX :</translation>
1483 <source>GEOM_SKETCHER_DY2</source>
1484 <translation>DY :</translation>
1487 <source>GEOM_SKETCHER_DZ2</source>
1488 <translation>DZ :</translation>
1491 <source>GEOM_SKETCHER_EL</source>
1492 <translation>Element Type</translation>
1495 <source>GEOM_SKETCHER_LENGTH</source>
1496 <translation>Length</translation>
1499 <source>GEOM_SKETCHER_LENGTH2</source>
1500 <translation>Length :</translation>
1503 <source>GEOM_SKETCHER_PER</source>
1504 <translation>Perpendicular</translation>
1507 <source>GEOM_SKETCHER_POINT</source>
1508 <translation>Point</translation>
1511 <source>GEOM_SKETCHER_POINT2</source>
1512 <translation>Point :</translation>
1515 <source>GEOM_SKETCHER_RADIUS2</source>
1516 <translation>Radius :</translation>
1519 <source>GEOM_SKETCHER_REL</source>
1520 <translation>Relative</translation>
1523 <source>GEOM_SKETCHER_SEGMENT</source>
1524 <translation>Segment</translation>
1527 <source>GEOM_SKETCHER_SEL</source>
1528 <translation>Selection</translation>
1531 <source>GEOM_SKETCHER_TAN</source>
1532 <translation>Tangent</translation>
1535 <source>GEOM_SKETCHER_TITLE</source>
1536 <translation>Sketch Construction</translation>
1539 <source>GEOM_3DSKETCHER_TITLE</source>
1540 <translation>3D Sketch Construction</translation>
1543 <source>GEOM_SKETCHER_TYPE</source>
1544 <translation>Type</translation>
1547 <source>GEOM_SKETCHER_UNDO</source>
1548 <translation>Undo</translation>
1551 <source>GEOM_SKETCHER_VALUES</source>
1552 <translation>Values</translation>
1555 <source>GEOM_SKETCHER_VX2</source>
1556 <translation>VX :</translation>
1559 <source>GEOM_SKETCHER_VXVY</source>
1560 <translation>VX-VY</translation>
1563 <source>GEOM_SKETCHER_VY2</source>
1564 <translation>VY :</translation>
1567 <source>GEOM_SKETCHER_X</source>
1568 <translation>X</translation>
1571 <source>GEOM_SKETCHER_X2</source>
1572 <translation>X :</translation>
1575 <source>GEOM_SKETCHER_X3</source>
1576 <translation>Abs. X :</translation>
1579 <source>GEOM_SKETCHER_Y</source>
1580 <translation>Y</translation>
1583 <source>GEOM_SKETCHER_Y2</source>
1584 <translation>Y :</translation>
1587 <source>GEOM_SKETCHER_Y3</source>
1588 <translation>Abs. Y :</translation>
1591 <source>GEOM_SKETCHER_Z2</source>
1592 <translation>Z :</translation>
1595 <source>GEOM_3DSKETCHER</source>
1596 <translation>3D Sketcher</translation>
1599 <source>GEOM_COORDINATES_TYPE</source>
1600 <translation>Coordinates Type</translation>
1603 <source>GEOM_SOLID</source>
1604 <translation>Solid</translation>
1607 <source>GEOM_SOLID_TITLE</source>
1608 <translation>Solid Construction</translation>
1611 <source>GEOM_SPHERE</source>
1612 <translation>Sphere</translation>
1615 <source>GEOM_SPHERE_CR</source>
1616 <translation>Center + Radius</translation>
1619 <source>GEOM_SPHERE_RO</source>
1620 <translation>Radius At Origin</translation>
1623 <source>GEOM_SPHERE_TITLE</source>
1624 <translation>Sphere Construction</translation>
1627 <source>GEOM_SPLINE</source>
1628 <translation>Spline</translation>
1631 <source>GEOM_SPLINE_TITLE</source>
1632 <translation>Spline Construction</translation>
1635 <source>GEOM_START_LCS</source>
1636 <translation>Start LCS</translation>
1639 <source>SELECT_UNPUBLISHED_EDGES</source>
1640 <translation>Select unpublished edges</translation>
1643 <source>GEOM_STEP</source>
1644 <translation>Step :</translation>
1647 <source>GEOM_STEP_TITLE</source>
1648 <translation>Step value for GUI constructions</translation>
1651 <source>GEOM_STEP_U</source>
1652 <translation>Step U :</translation>
1655 <source>GEOM_STEP_V</source>
1656 <translation>Step V :</translation>
1659 <source>GEOM_STUDY_LOCKED</source>
1660 <translation>The active study is locked and therefore cannot be modified</translation>
1663 <source>GEOM_SUBSHAPE_SELECT</source>
1664 <translation>Select Sub Shapes</translation>
1667 <source>GEOM_SUBSHAPE_TITLE</source>
1668 <translation>Sub Shapes Selection</translation>
1671 <source>GEOM_SUBSHAPE_TYPE</source>
1672 <translation>Sub Shapes Type :</translation>
1675 <source>GEOM_SUB_SHAPE</source>
1676 <translation>Sub Shapes</translation>
1679 <source>GEOM_SUPPRESSHOLE_FACE_SHELL</source>
1680 <translation>Face or shell</translation>
1683 <source>GEOM_SUPPRESSHOLE_SELECTFACE</source>
1684 <translation>Select the face with hole</translation>
1687 <source>GEOM_SUPPRESSHOLE_SELECTFACE_END</source>
1688 <translation>Select end face (if hole traversing)</translation>
1691 <source>GEOM_SUPPRESSHOLE_SELECTWIRE</source>
1692 <translation>Select wire on face</translation>
1695 <source>GEOM_SUPPRESSHOLE_SELECTWIRE_END</source>
1696 <translation>Select end wire (if hole traversing)</translation>
1699 <source>GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE</source>
1700 <translation>Select hole(s) on the face</translation>
1703 <source>GEOM_SUPPRESSHOLE_TITLE</source>
1704 <translation>Suppress holes</translation>
1707 <source>GEOM_SUPPRESS_RESULT</source>
1708 <translation>Suppress Result</translation>
1711 <source>GEOM_SUPPRESS_RESULT_INSIDE</source>
1712 <translation>Inside</translation>
1715 <source>GEOM_SUPPRESS_RESULT_OUTSIDE</source>
1716 <translation>Outside</translation>
1719 <source>GEOM_SUPRESSFACE</source>
1720 <translation>Supress Face</translation>
1723 <source>GEOM_SUPRESSFACE_SELECT</source>
1724 <translation>Select Faces To Suppress</translation>
1727 <source>GEOM_SUPRESSFACE_TITLE</source>
1728 <translation>Suppress Faces In An Object</translation>
1731 <source>GEOM_SURFACE_CONTINUTY</source>
1732 <translation>Surface continuity</translation>
1735 <source>GEOM_SURFACE_MODE</source>
1736 <translation>Surface mode</translation>
1739 <source>GEOM_SURFCONE</source>
1740 <translation>Conical Face</translation>
1743 <source>GEOM_SURFCYLINDER</source>
1744 <translation>Cylindrical Face</translation>
1747 <source>GEOM_SURFSPHERE</source>
1748 <translation>Spherical Face</translation>
1751 <source>GEOM_SURFTORUS</source>
1752 <translation>Toroidal Face</translation>
1755 <source>GEOM_SameParameter</source>
1756 <translation>SameParameter</translation>
1759 <source>GEOM_SplitAngle</source>
1760 <translation>SplitAngle</translation>
1763 <source>GEOM_SplitClosedFaces</source>
1764 <translation>SplitClosedFaces</translation>
1767 <source>GEOM_SplitContinuity</source>
1768 <translation>SplitContinuity</translation>
1771 <source>GEOM_TOLERANCE</source>
1772 <translation>Tolerance</translation>
1775 <source>GEOM_TOLERANCE_CONSTR</source>
1776 <translation>Object And Its Tolerances</translation>
1779 <source>GEOM_TOLERANCE_EDGE</source>
1780 <translation>Edge :</translation>
1783 <source>GEOM_TOLERANCE_FACE</source>
1784 <translation>Face :</translation>
1787 <source>GEOM_TOLERANCE_TITLE</source>
1788 <translation>Maximum Tolerance</translation>
1791 <source>GEOM_TOLERANCE_VERTEX</source>
1792 <translation>Vertex :</translation>
1795 <source>GEOM_TOOL_OBJECT</source>
1796 <translation>Tool Object</translation>
1799 <source>GEOM_TORUS</source>
1800 <translation>Torus</translation>
1803 <source>GEOM_TORUS_TITLE</source>
1804 <translation>Torus Construction</translation>
1807 <source>GEOM_TRANSLATION</source>
1808 <translation>Translation</translation>
1811 <source>GEOM_TRANSLATION_COOR</source>
1812 <translation>Translation With Coordinates</translation>
1815 <source>GEOM_TRANSLATION_TITLE</source>
1816 <translation>Translation Of An Object</translation>
1819 <source>GEOM_TRANSPARENCY_OPAQUE</source>
1820 <translation>Opaque</translation>
1823 <source>GEOM_TRANSPARENCY_TITLE</source>
1824 <translation>Transparency</translation>
1827 <source>GEOM_TRANSPARENCY_TRANSPARENT</source>
1828 <translation>Transparent</translation>
1831 <source>GEOM_TRIHEDRON</source>
1832 <translation>Trihedron</translation>
1835 <source>GEOM_ToBezier</source>
1836 <translation>ToBezier</translation>
1839 <source>GEOM_VALUE</source>
1840 <translation>Value</translation>
1843 <source>GEOM_VECTOR</source>
1844 <translation>Vector</translation>
1847 <source>GEOM_VECTOR_LENGTH</source>
1848 <translation>Vector Length :</translation>
1851 <source>GEOM_VECTOR_TITLE</source>
1852 <translation>Vector Construction</translation>
1855 <source>GEOM_VECTOR_U</source>
1856 <translation>Vector U</translation>
1859 <source>GEOM_VECTOR_V</source>
1860 <translation>Vector V</translation>
1863 <source>GEOM_VERTEX</source>
1864 <translation>Vertex</translation>
1867 <source>GEOM_VERTEXES</source>
1868 <translation>Vertexes</translation>
1871 <source>GEOM_WATER_DENSITY</source>
1872 <translation>Water Density :</translation>
1875 <source>GEOM_WEIGHT</source>
1876 <translation>Weight :</translation>
1879 <source>GEOM_WIDTH</source>
1880 <translation>Width :</translation>
1883 <source>GEOM_WHATIS</source>
1884 <translation>Whatis</translation>
1887 <source>GEOM_WHATIS_OBJECT</source>
1888 <translation>Object And Its Topological Information</translation>
1891 <source>GEOM_WHATIS_TITLE</source>
1892 <translation>Whatis Information</translation>
1895 <source>GEOM_WIRE</source>
1896 <translation>Wire</translation>
1899 <source>GEOM_WIRES</source>
1900 <translation>Wire(s)</translation>
1903 <source>GEOM_WIRES_TO_REMOVE</source>
1904 <translation>Wires to remove</translation>
1907 <source>GEOM_WIREZ</source>
1908 <translation>Wires</translation>
1911 <source>GEOM_WIRE_CONNECT</source>
1912 <translation>Wire creation from wires/edges connected</translation>
1915 <source>GEOM_WIRE_TITLE</source>
1916 <translation>Create A Wire</translation>
1919 <source>GEOM_WPLANE</source>
1920 <translation>Working Plane</translation>
1923 <source>GEOM_WPLANE_FACE</source>
1924 <translation>Plane, Planar Face or LCS</translation>
1927 <source>GEOM_WPLANE_ORIGIN</source>
1928 <translation>Select a plane</translation>
1931 <source>GEOM_WPLANE_OXY</source>
1932 <translation>OXY</translation>
1935 <source>GEOM_WPLANE_OYZ</source>
1936 <translation>OYZ</translation>
1939 <source>GEOM_WPLANE_OZX</source>
1940 <translation>OZX</translation>
1943 <source>GEOM_WPLANE_TITLE</source>
1944 <translation>Working Plane Selection</translation>
1947 <source>GEOM_WPLANE_VECTOR</source>
1948 <translation>Select 2 vectors</translation>
1951 <source>GEOM_WPLANE_VX</source>
1952 <translation>Vector X</translation>
1955 <source>GEOM_WPLANE_VZ</source>
1956 <translation>Vector Z</translation>
1959 <source>GEOM_WRN_RADIUS_NULL</source>
1960 <translation>Radius is null</translation>
1963 <source>GEOM_WRN_WARNING</source>
1964 <translation>Warning</translation>
1967 <source>WRN_SHAPE_UNCLOSED</source>
1968 <translation>Unable to create solid from unclosed shape %1</translation>
1971 <source>GEOM_X</source>
1972 <translation>X :</translation>
1975 <source>GEOM_Y</source>
1976 <translation>Y :</translation>
1979 <source>GEOM_Z</source>
1980 <translation>Z :</translation>
1983 <source>GLUE_NEW_OBJ_NAME</source>
1984 <translation>Glue</translation>
1987 <source>MEN_ALL_SEL_ONLY</source>
1988 <translation>Select All</translation>
1991 <source>MEN_ARC</source>
1992 <translation>Arc</translation>
1995 <source>MEN_ARCHIMEDE</source>
1996 <translation>Archimede</translation>
1999 <source>MEN_BASIC</source>
2000 <translation>Basic</translation>
2003 <source>MEN_BASIC_PROPS</source>
2004 <translation>Basic Properties</translation>
2007 <source>MEN_BLOCKS</source>
2008 <translation>Blocks</translation>
2011 <source>MEN_BND_BOX</source>
2012 <translation>Bounding Box</translation>
2015 <source>MEN_BOOLEAN</source>
2016 <translation>Boolean</translation>
2019 <source>MEN_BOX</source>
2020 <translation>Box</translation>
2023 <source>MEN_BUILD</source>
2024 <translation>Build</translation>
2027 <source>MEN_CHAMFER</source>
2028 <translation>Chamfer</translation>
2031 <source>MEN_CHANGE_ORIENTATION</source>
2032 <translation>Change Orientation</translation>
2035 <source>MEN_CHECK</source>
2036 <translation>Check</translation>
2039 <source>MEN_CHECK_COMPOUND</source>
2040 <translation>Check Compound of Blocks</translation>
2043 <source>MEN_CHECK_FREE_BNDS</source>
2044 <translation>Check Free Boundaries</translation>
2047 <source>MEN_CHECK_FREE_FACES</source>
2048 <translation>Check Free Faces</translation>
2051 <source>MEN_CHECK_GEOMETRY</source>
2052 <translation>Check Geometry</translation>
2055 <source>MEN_CIRCLE</source>
2056 <translation>Circle</translation>
2059 <source>MEN_CLIPPING</source>
2060 <translation>Clipping Range</translation>
2063 <source>MEN_CLOSE_CONTOUR</source>
2064 <translation>Close Contour</translation>
2067 <source>MEN_COMMON</source>
2068 <translation>Common</translation>
2071 <source>MEN_COMPOUND</source>
2072 <translation>Compound</translation>
2075 <source>MEN_COMPOUND_SEL_ONLY</source>
2076 <translation>Compound</translation>
2079 <source>MEN_CONE</source>
2080 <translation>Cone</translation>
2083 <source>MEN_CURVE</source>
2084 <translation>Curve</translation>
2087 <source>MEN_CUT</source>
2088 <translation>Cut</translation>
2091 <source>MEN_CYLINDER</source>
2092 <translation>Cylinder</translation>
2095 <source>MEN_DELETE</source>
2096 <translation>Delete</translation>
2099 <source>MEN_DIMENSIONS</source>
2100 <translation>Dimensions</translation>
2103 <source>MEN_DISPLAY</source>
2104 <translation>Show</translation>
2107 <source>MEN_DISK</source>
2108 <translation>Disk</translation>
2111 <source>MEN_DISPLAY_ALL</source>
2112 <translation>Show All</translation>
2115 <source>MEN_DISPLAY_MODE</source>
2116 <translation>Display Mode</translation>
2119 <source>MEN_DISPLAY_ONLY</source>
2120 <translation>Show Only</translation>
2123 <source>MEN_EDGE</source>
2124 <translation>Edge</translation>
2127 <source>MEN_EDGE_SEL_ONLY</source>
2128 <translation>Edge</translation>
2131 <source>MEN_EDIT</source>
2132 <translation>Edit</translation>
2135 <source>MEN_ELLIPSE</source>
2136 <translation>Ellipse</translation>
2139 <source>MEN_ERASE</source>
2140 <translation>Hide</translation>
2143 <source>MEN_ERASE_ALL</source>
2144 <translation>Hide All</translation>
2147 <source>MEN_EXPLODE</source>
2148 <translation>Explode</translation>
2151 <source>MEN_EXPLODE_BLOCKS</source>
2152 <translation>Explode on Blocks</translation>
2155 <source>MEN_EXPORT</source>
2156 <translation>Export...</translation>
2159 <source>MEN_EXTRUSION</source>
2160 <translation>Extrusion</translation>
2163 <source>MEN_FACE</source>
2164 <translation>Face</translation>
2167 <source>MEN_FACE_SEL_ONLY</source>
2168 <translation>Face</translation>
2171 <source>MEN_FILE</source>
2172 <translation>File</translation>
2175 <source>MEN_FILLET</source>
2176 <translation>Fillet</translation>
2179 <source>MEN_FILLET_2D</source>
2180 <translation>Fillet 2D</translation>
2183 <source>MEN_FILLING</source>
2184 <translation>Filling</translation>
2187 <source>MEN_FUSE</source>
2188 <translation>Fuse</translation>
2191 <source>MEN_GENERATION</source>
2192 <translation>Generation</translation>
2195 <source>MEN_GLUE_FACES</source>
2196 <translation>Glue Faces</translation>
2199 <source>MEN_GROUP</source>
2200 <translation>Group</translation>
2203 <source>MEN_GROUP_CREATE</source>
2204 <translation>Create</translation>
2207 <source>MEN_GROUP_EDIT</source>
2208 <translation>Edit</translation>
2211 <source>MEN_RELOAD_IMPORTED</source>
2212 <translation>Reload From Disk</translation>
2215 <source>MEN_HEX_SOLID</source>
2216 <translation>Hexahedral Solid</translation>
2219 <source>MEN_IMPORT</source>
2220 <translation>Import...</translation>
2223 <source>MEN_INERTIA</source>
2224 <translation>Inertia</translation>
2227 <source>MEN_ISOS</source>
2228 <translation>Isos</translation>
2231 <source>MEN_LINE</source>
2232 <translation>Line</translation>
2235 <source>MEN_LOCAL_CS</source>
2236 <translation>Local Coordinate System</translation>
2239 <source>MEN_MASS_CENTER</source>
2240 <translation>Center of Mass</translation>
2243 <source>MEN_MEASURES</source>
2244 <translation>Measures</translation>
2247 <source>MEN_MIN_DIST</source>
2248 <translation>Min Distance</translation>
2251 <source>MEN_MIRROR</source>
2252 <translation>Mirror Image</translation>
2255 <source>MEN_MODIFY_LOCATION</source>
2256 <translation>Modify the Location</translation>
2259 <source>MEN_MUL_ROTATION</source>
2260 <translation>Multi-Rotation</translation>
2263 <source>MEN_MUL_TRANSFORM</source>
2264 <translation>Multi-Transformation</translation>
2267 <source>MEN_MUL_TRANSLATION</source>
2268 <translation>Multi-Translation</translation>
2271 <source>MEN_NEW_ENTITY</source>
2272 <translation>New Entity</translation>
2275 <source>MEN_OFFSET</source>
2276 <translation>Offset Surface</translation>
2279 <source>MEN_OPERATIONS</source>
2280 <translation>Operations</translation>
2283 <source>MEN_PARTITION</source>
2284 <translation>Partition</translation>
2287 <source>MEN_PIPE</source>
2288 <translation>Extrusion Along a Path</translation>
2291 <source>MEN_PLANE</source>
2292 <translation>Plane</translation>
2295 <source>MEN_POINT</source>
2296 <translation>Point</translation>
2299 <source>MEN_POINT_COORDS</source>
2300 <translation>Point Coordinates</translation>
2303 <source>MEN_POINT_ON_EDGE</source>
2304 <translation>Add Point on Edge</translation>
2307 <source>MEN_POP_COLOR</source>
2308 <translation>Color</translation>
2311 <source>MEN_POP_CREATE_GROUP</source>
2312 <translation>Create Group</translation>
2315 <source>MEN_POP_ISOS</source>
2316 <translation>Isos</translation>
2319 <source>MEN_POP_RENAME</source>
2320 <translation>Rename</translation>
2323 <source>MEN_POP_SHADING</source>
2324 <translation>Shading</translation>
2327 <source>MEN_POP_TRANSPARENCY</source>
2328 <translation>Transparency</translation>
2331 <source>MEN_POP_WIREFRAME</source>
2332 <translation>Wireframe</translation>
2335 <source>MEN_PREFERENCES</source>
2336 <translation>Preferences</translation>
2339 <source>MEN_PREFERENCES_GEOM</source>
2340 <translation>Geometry</translation>
2343 <source>MEN_PRIMITIVES</source>
2344 <translation>Primitives</translation>
2347 <source>MEN_PROPAGATE</source>
2348 <translation>Propagate</translation>
2351 <source>MEN_Q_FACE</source>
2352 <translation>Quadrangle Face</translation>
2355 <source>MEN_REPAIR</source>
2356 <translation>Repair</translation>
2359 <source>MEN_REVOLUTION</source>
2360 <translation>Revolution</translation>
2363 <source>MEN_ROTATION</source>
2364 <translation>Rotation</translation>
2367 <source>MEN_SCALE</source>
2368 <translation>Scale Transform</translation>
2371 <source>MEN_SECTION</source>
2372 <translation>Section</translation>
2375 <source>MEN_SELECT_ONLY</source>
2376 <translation>Select Only</translation>
2379 <source>MEN_SEWING</source>
2380 <translation>Sewing</translation>
2383 <source>MEN_SHADING</source>
2384 <translation>Shading</translation>
2387 <source>MEN_SHADING_COLOR</source>
2388 <translation>Shading Color</translation>
2391 <source>MEN_SHAPE_PROCESS</source>
2392 <translation>Shape Processing</translation>
2395 <source>MEN_SHELL</source>
2396 <translation>Shell</translation>
2399 <source>MEN_SHELL_SEL_ONLY</source>
2400 <translation>Shell</translation>
2403 <source>MEN_SKETCH</source>
2404 <translation>Sketch</translation>
2407 <source>MEN_3DSKETCH</source>
2408 <translation>3D Sketch</translation>
2411 <source>MEN_SOLID</source>
2412 <translation>Solid</translation>
2415 <source>MEN_SOLID_SEL_ONLY</source>
2416 <translation>Solid</translation>
2419 <source>MEN_SPHERE</source>
2420 <translation>Sphere</translation>
2423 <source>MEN_STEP_VALUE</source>
2424 <translation>Step Value</translation>
2427 <source>MEN_SUPPERSS_HOLES</source>
2428 <translation>Suppress Holes</translation>
2431 <source>MEN_SUPPRESS_FACES</source>
2432 <translation>Suppress Faces</translation>
2435 <source>MEN_SUPPRESS_INT_WIRES</source>
2436 <translation>Suppress Internal Wires</translation>
2439 <source>MEN_TOLERANCE</source>
2440 <translation>Compute Tolerance</translation>
2443 <source>MEN_TOOLS</source>
2444 <translation>Tools</translation>
2447 <source>MEN_TORUS</source>
2448 <translation>Torus</translation>
2451 <source>MEN_TRANSFORMATION</source>
2452 <translation>Transformation</translation>
2455 <source>MEN_TRANSLATION</source>
2456 <translation>Translation</translation>
2459 <source>MEN_VECTOR</source>
2460 <translation>Vector</translation>
2463 <source>MEN_VERTEX_SEL_ONLY</source>
2464 <translation>Vertex</translation>
2467 <source>MEN_VIEW</source>
2468 <translation>View</translation>
2471 <source>MEN_WHAT_IS</source>
2472 <translation>What is</translation>
2475 <source>MEN_WIRE</source>
2476 <translation>Wire</translation>
2479 <source>MEN_WIREFRAME</source>
2480 <translation>Wireframe</translation>
2483 <source>MEN_WIRE_SEL_ONLY</source>
2484 <translation>Wire</translation>
2487 <source>MEN_WORK_PLANE</source>
2488 <translation>Working Plane</translation>
2491 <source>NAME_LBL</source>
2492 <translation>Name: </translation>
2495 <source>NON_GEOM_OBJECTS_SELECTED</source>
2496 <translation>There are objects selected which do not belong to %1 component.</translation>
2499 <source>PREF_DISPLAY_MODE</source>
2500 <translation>Default display mode</translation>
2503 <source>PREF_FREE_BOUND_COLOR</source>
2504 <translation>Color of free boundaries</translation>
2507 <source>PREF_GROUP_GENERAL</source>
2508 <translation>General</translation>
2511 <source>PREF_GROUP_OCCVIEWER</source>
2512 <translation>OCC Viewer 3d</translation>
2515 <source>PREF_GROUP_VERTEX</source>
2516 <translation>Marker of Points</translation>
2519 <source>PREF_ISOS_COLOR</source>
2520 <translation>Color of isolines</translation>
2523 <source>PREF_LINE_COLOR</source>
2524 <translation>Color of edges, vectors, wires</translation>
2527 <source>PREF_MARKER_SCALE</source>
2528 <translation>Size</translation>
2531 <source>PREF_POINT_COLOR</source>
2532 <translation>Color of points</translation>
2535 <source>PREF_SHADING_COLOR</source>
2536 <translation>Default shading color</translation>
2539 <source>PREF_STEP_VALUE</source>
2540 <translation>Step value for spin boxes</translation>
2543 <source>PREF_TAB_SETTINGS</source>
2544 <translation>Settings</translation>
2547 <source>PREF_TYPE_OF_MARKER</source>
2548 <translation>Type</translation>
2551 <source>PREF_WIREFRAME_COLOR</source>
2552 <translation>Default wireframe color</translation>
2555 <source>PROCESS_SHAPE_NEW_OBJ_NAME</source>
2556 <translation>ProcessShape</translation>
2559 <source>REMOVE_HOLES_NEW_OBJ_NAME</source>
2560 <translation>SupressHoles</translation>
2563 <source>REMOVE_INT_WIRES_NEW_OBJ_NAME</source>
2564 <translation>RemoveIntWires</translation>
2567 <source>SEWING_NEW_OBJ_NAME</source>
2568 <translation>Sewing</translation>
2571 <source>STB_ALL_SEL_ONLY</source>
2572 <translation>Select all Objects</translation>
2575 <source>STB_ARC</source>
2576 <translation>Create an arc</translation>
2579 <source>STB_ARCHIMEDE</source>
2580 <translation>Archimede</translation>
2583 <source>STB_BASIC_PROPS</source>
2584 <translation>Basic properties</translation>
2587 <source>STB_BND_BOX</source>
2588 <translation>Compute bounding box</translation>
2591 <source>STB_BOX</source>
2592 <translation>Create a box</translation>
2595 <source>STB_CHAMFER</source>
2596 <translation>Chamfer</translation>
2599 <source>STB_CHANGE_ORIENTATION</source>
2600 <translation>Change orientation</translation>
2603 <source>STB_CHECK</source>
2604 <translation>Check</translation>
2607 <source>STB_CHECK_COMPOUND</source>
2608 <translation>Check compound of blocks</translation>
2611 <source>STB_CHECK_FREE_BNDS</source>
2612 <translation>Check free boundaries</translation>
2615 <source>STB_CHECK_FREE_FACES</source>
2616 <translation>Check free faces</translation>
2619 <source>STB_CHECK_GEOMETRY</source>
2620 <translation>Check Geometry</translation>
2623 <source>STB_CIRCLE</source>
2624 <translation>Create a circle</translation>
2627 <source>STB_CLIPPING</source>
2628 <translation>Clipping range</translation>
2631 <source>STB_CLOSE_CONTOUR</source>
2632 <translation>Perform close contour</translation>
2635 <source>STB_COMMON</source>
2636 <translation>Common</translation>
2639 <source>STB_COMPOUND</source>
2640 <translation>Build a compound</translation>
2643 <source>STB_COMPOUND_SEL_ONLY</source>
2644 <translation>Select only a Compounds</translation>
2647 <source>STB_CONE</source>
2648 <translation>Create a cone</translation>
2651 <source>STB_CURVE</source>
2652 <translation>Create a curve</translation>
2655 <source>STB_CUT</source>
2656 <translation>Cut</translation>
2659 <source>STB_CYLINDER</source>
2660 <translation>Create a cylinder</translation>
2663 <source>STB_DELETE</source>
2664 <translation>Delete object</translation>
2667 <source>STB_DISK</source>
2668 <translation>Create a disk</translation>
2671 <source>STB_DISPLAY</source>
2672 <translation>Show object(s)</translation>
2675 <source>STB_DISPLAY_ALL</source>
2676 <translation>Show all</translation>
2679 <source>STB_DISPLAY_ONLY</source>
2680 <translation>Show only</translation>
2683 <source>STB_EDGE</source>
2684 <translation>Build an edge</translation>
2687 <source>STB_EDGE_SEL_ONLY</source>
2688 <translation>Select only a Edges</translation>
2691 <source>STB_ELLIPSE</source>
2692 <translation>Create an ellipse</translation>
2695 <source>STB_ERASE</source>
2696 <translation>Hide object(s)</translation>
2699 <source>STB_ERASE_ALL</source>
2700 <translation>Hide all</translation>
2703 <source>STB_EXPLODE</source>
2704 <translation>Explode</translation>
2707 <source>STB_EXPLODE_BLOCKS</source>
2708 <translation>Explode on Blocks</translation>
2711 <source>STB_EXPORT</source>
2712 <translation>Export geometry to BREP file</translation>
2715 <source>STB_EXTRUSION</source>
2716 <translation>Create an extrusion</translation>
2719 <source>STB_FACE</source>
2720 <translation>Build a face</translation>
2723 <source>STB_FACE_SEL_ONLY</source>
2724 <translation>Select only a Faces</translation>
2727 <source>STB_FILLET</source>
2728 <translation>Fillet</translation>
2731 <source>STB_FILLING</source>
2732 <translation>Create a filling</translation>
2735 <source>STB_FUSE</source>
2736 <translation>Fuse</translation>
2739 <source>STB_GLUE_FACES</source>
2740 <translation>Perform glue faces</translation>
2743 <source>STB_GROUP_CREATE</source>
2744 <translation>Create a group</translation>
2747 <source>STB_GROUP_EDIT</source>
2748 <translation>Edit a group</translation>
2751 <source>STB_RELOAD_IMPORTED</source>
2752 <translation>Reload imported shape from its original place on disk</translation>
2755 <source>STB_HEX_SOLID</source>
2756 <translation>Hexahedral Solid</translation>
2759 <source>STB_IMPORT</source>
2760 <translation>Import geometry from BREP file</translation>
2763 <source>STB_INERTIA</source>
2764 <translation>Compute intertia</translation>
2767 <source>STB_ISOS</source>
2768 <translation>Set number of isolines</translation>
2771 <source>STB_LINE</source>
2772 <translation>Create a line</translation>
2775 <source>STB_LOCAL_CS</source>
2776 <translation>Create a local coordinate system</translation>
2779 <source>STB_MASS_CENTER</source>
2780 <translation>Compute center of mass</translation>
2783 <source>STB_MIN_DIST</source>
2784 <translation>Compute minimum distance</translation>
2787 <source>STB_MIRROR</source>
2788 <translation>Mirror image</translation>
2791 <source>STB_MODIFY_LOCATION</source>
2792 <translation>Modify the Location</translation>
2795 <source>STB_MUL_ROTATION</source>
2796 <translation>Multi-Rotation</translation>
2799 <source>STB_MUL_TRANSFORM</source>
2800 <translation>Multi-transformation</translation>
2803 <source>STB_MUL_TRANSLATION</source>
2804 <translation>Multi-Translation</translation>
2807 <source>STB_OFFSET</source>
2808 <translation>Offset surface</translation>
2811 <source>STB_PARTITION</source>
2812 <translation>Partition</translation>
2815 <source>STB_PIPE</source>
2816 <translation>Create a shape by Extrusion along a path</translation>
2819 <source>STB_PLANE</source>
2820 <translation>Create a plane</translation>
2823 <source>STB_POINT</source>
2824 <translation>Create a point</translation>
2827 <source>STB_POINT_COORDS</source>
2828 <translation>Point coordinates</translation>
2831 <source>STB_POINT_ON_EDGE</source>
2832 <translation>Add point on edge</translation>
2835 <source>STB_POP_COLOR</source>
2836 <translation>Color</translation>
2839 <source>STB_POP_CREATE_GROUP</source>
2840 <translation>Create Group</translation>
2843 <source>STB_POP_ISOS</source>
2844 <translation>Isolines</translation>
2847 <source>STB_POP_RENAME</source>
2848 <translation>Rename</translation>
2851 <source>STB_POP_SHADING</source>
2852 <translation>Shading</translation>
2855 <source>STB_POP_TRANSPARENCY</source>
2856 <translation>Transparency</translation>
2859 <source>STB_POP_WIREFRAME</source>
2860 <translation>Wireframe</translation>
2863 <source>STB_PROPAGATE</source>
2864 <translation>Propagate</translation>
2867 <source>STB_Q_FACE</source>
2868 <translation>Quadrangle Face</translation>
2871 <source>STB_REVOLUTION</source>
2872 <translation>Create a revolution</translation>
2875 <source>STB_ROTATION</source>
2876 <translation>Rotation</translation>
2879 <source>STB_SCALE</source>
2880 <translation>Scale transform</translation>
2883 <source>STB_SECTION</source>
2884 <translation>Section</translation>
2887 <source>STB_SEWING</source>
2888 <translation>Perform sewing</translation>
2891 <source>STB_SHADING</source>
2892 <translation>Shading</translation>
2895 <source>STB_SHADING_COLOR</source>
2896 <translation>Set shading color</translation>
2899 <source>STB_SHAPE_PROCESS</source>
2900 <translation>Perform shape processing </translation>
2903 <source>STB_SHELL</source>
2904 <translation>Build a shell</translation>
2907 <source>STB_SHELL_SEL_ONLY</source>
2908 <translation>Select only a Shells</translation>
2911 <source>STB_SKETCH</source>
2912 <translation>Sketch</translation>
2915 <source>STB_SOLID</source>
2916 <translation>Build a solid</translation>
2919 <source>STB_SOLID_SEL_ONLY</source>
2920 <translation>Select only a Solids</translation>
2923 <source>STB_SPHERE</source>
2924 <translation>Create a sphere</translation>
2927 <source>STB_STEP_VALUE</source>
2928 <translation>Set step value</translation>
2931 <source>STB_SUPPERSS_HOLES</source>
2932 <translation>Perform suppress holes</translation>
2935 <source>STB_SUPPRESS_FACES</source>
2936 <translation>Perform suppress faces</translation>
2939 <source>STB_SUPPRESS_INT_WIRES</source>
2940 <translation>Perform suppress internal wires</translation>
2943 <source>STB_TOLERANCE</source>
2944 <translation>Compute tolerance</translation>
2947 <source>STB_TORUS</source>
2948 <translation>Create a torus</translation>
2951 <source>STB_TRANSLATION</source>
2952 <translation>Translation</translation>
2955 <source>STB_VECTOR</source>
2956 <translation>Create a vector</translation>
2959 <source>STB_VERTEX_SEL_ONLY</source>
2960 <translation>Select only a Points</translation>
2963 <source>STB_WHAT_IS</source>
2964 <translation>What is</translation>
2967 <source>STB_WIRE</source>
2968 <translation>Build a wire</translation>
2971 <source>STB_WIRE_SEL_ONLY</source>
2972 <translation>Select only a Wires</translation>
2975 <source>STB_WORK_PLANE</source>
2976 <translation>Create a working plane</translation>
2979 <source>SUPPRESS_RESULT</source>
2980 <translation>Suppress Result</translation>
2983 <source>SUPRESS_FACE_NEW_OBJ_NAME</source>
2984 <translation>SupressFaces</translation>
2987 <source>ShHealOper_ErrorExecution_msg</source>
2988 <translation>Shape Healing algorithm failed</translation>
2991 <source>ShHealOper_InvalidParameters_msg</source>
2992 <translation>Incorrect parameters for Shape Healing algorithm</translation>
2995 <source>ShHealOper_NotError_msg</source>
2996 <translation>Shape Healing algorithm has done no modification of the original shape</translation>
2999 <source>TLT_RENAME</source>
3000 <translation>Rename</translation>
3003 <source>TOM_O</source>
3004 <translation>O</translation>
3007 <source>TOM_O_PLUS</source>
3008 <translation>+ in O</translation>
3011 <source>TOM_O_POINT</source>
3012 <translation>. in O</translation>
3015 <source>TOM_O_STAR</source>
3016 <translation>* in O</translation>
3019 <source>TOM_O_X</source>
3020 <translation>X in O</translation>
3023 <source>TOM_PLUS</source>
3024 <translation>+</translation>
3027 <source>TOM_POINT</source>
3028 <translation>.</translation>
3031 <source>TOM_STAR</source>
3032 <translation>*</translation>
3035 <source>TOM_X</source>
3036 <translation>X</translation>
3039 <source>TOOL_BASIC</source>
3040 <translation>Basic</translation>
3043 <source>TOOL_BOOLEAN</source>
3044 <translation>Boolean operations</translation>
3047 <source>TOOL_GENERATION</source>
3048 <translation>Generation</translation>
3051 <source>TOOL_PRIMITIVES</source>
3052 <translation>Primitives</translation>
3055 <source>TOOL_TRANSFORMATION</source>
3056 <translation>Transformation</translation>
3059 <source>TOP_ARC</source>
3060 <translation>Create an arc</translation>
3063 <source>TOP_ARCHIMEDE</source>
3064 <translation>Archimede</translation>
3067 <source>TOP_BASIC_PROPS</source>
3068 <translation>Basic properties</translation>
3071 <source>TOP_BND_BOX</source>
3072 <translation>Compute bounding box</translation>
3075 <source>TOP_BOX</source>
3076 <translation>Create a box</translation>
3079 <source>TOP_CHAMFER</source>
3080 <translation>Chamfer</translation>
3083 <source>TOP_CHANGE_ORIENTATION</source>
3084 <translation>Change orientation</translation>
3087 <source>TOP_CHECK</source>
3088 <translation>Check</translation>
3091 <source>TOP_CHECK_COMPOUND</source>
3092 <translation>Check compound of blocks</translation>
3095 <source>TOP_CHECK_FREE_BNDS</source>
3096 <translation>Check free boundaries</translation>
3099 <source>TOP_CHECK_FREE_FACES</source>
3100 <translation>Check free faces</translation>
3103 <source>TOP_CHECK_GEOMETRY</source>
3104 <translation>Check Geometry</translation>
3107 <source>TOP_CIRCLE</source>
3108 <translation>Create a circle</translation>
3111 <source>TOP_CLIPPING</source>
3112 <translation>Clipping range</translation>
3115 <source>TOP_CLOSE_CONTOUR</source>
3116 <translation>Perform close contour</translation>
3119 <source>TOP_COMMON</source>
3120 <translation>Common</translation>
3123 <source>TOP_COMPOUND</source>
3124 <translation>Build a compound</translation>
3127 <source>TOP_CONE</source>
3128 <translation>Create a cone</translation>
3131 <source>TOP_CURVE</source>
3132 <translation>Create a curve</translation>
3135 <source>TOP_CUT</source>
3136 <translation>Cut</translation>
3139 <source>TOP_CYLINDER</source>
3140 <translation>Create a cylinder</translation>
3143 <source>TOP_DELETE</source>
3144 <translation>Delete object</translation>
3147 <source>TOP_DISK</source>
3148 <translation>Build a Disk</translation>
3151 <source>TOP_DISPLAY</source>
3152 <translation>Show</translation>
3155 <source>TOP_DISPLAY_ALL</source>
3156 <translation>Show all</translation>
3159 <source>TOP_DISPLAY_ONLY</source>
3160 <translation>Show only</translation>
3163 <source>TOP_EDGE</source>
3164 <translation>Build an edge</translation>
3167 <source>TOP_ELLIPSE</source>
3168 <translation>Create an ellipse</translation>
3171 <source>TOP_ERASE</source>
3172 <translation>Hide</translation>
3175 <source>TOP_ERASE_ALL</source>
3176 <translation>Hide all</translation>
3179 <source>TOP_EXPLODE</source>
3180 <translation>Explode</translation>
3183 <source>TOP_EXPLODE_BLOCKS</source>
3184 <translation>Explode on Blocks</translation>
3187 <source>TOP_EXPORT</source>
3188 <translation>Export geometry to BREP file</translation>
3191 <source>TOP_EXTRUSION</source>
3192 <translation>Create an extrusion</translation>
3195 <source>TOP_FACE</source>
3196 <translation>Build a face</translation>
3199 <source>TOP_FILLET</source>
3200 <translation>Fillet</translation>
3203 <source>TOP_FILLING</source>
3204 <translation>Create a filling</translation>
3207 <source>TOP_FUSE</source>
3208 <translation>Fuse</translation>
3211 <source>TOP_GLUE_FACES</source>
3212 <translation>Perform glue faces</translation>
3215 <source>TOP_GROUP_CREATE</source>
3216 <translation>Create a group</translation>
3219 <source>TOP_GROUP_EDIT</source>
3220 <translation>Edit a group</translation>
3223 <source>TOP_HEX_SOLID</source>
3224 <translation>Hexahedral Solid</translation>
3227 <source>TOP_IMPORT</source>
3228 <translation>Import geometry from BREP file</translation>
3231 <source>TOP_INERTIA</source>
3232 <translation>Compute intertia</translation>
3235 <source>TOP_ISOS</source>
3236 <translation>Set number of isolines</translation>
3239 <source>TOP_LINE</source>
3240 <translation>Create a line</translation>
3243 <source>TOP_LOCAL_CS</source>
3244 <translation>Create a local coordinate system</translation>
3247 <source>TOP_MASS_CENTER</source>
3248 <translation>Compute center of mass</translation>
3251 <source>TOP_MIN_DIST</source>
3252 <translation>Compute minimum distance</translation>
3255 <source>TOP_MIRROR</source>
3256 <translation>Mirror image</translation>
3259 <source>TOP_MODIFY_LOCATION</source>
3260 <translation>Modify the Location</translation>
3263 <source>TOP_MUL_ROTATION</source>
3264 <translation>Multi-Rotation</translation>
3267 <source>TOP_MUL_TRANSFORM</source>
3268 <translation>Multi-transformation</translation>
3271 <source>TOP_MUL_TRANSLATION</source>
3272 <translation>Multi-Translation</translation>
3275 <source>TOP_OFFSET</source>
3276 <translation>Offset surface</translation>
3279 <source>TOP_PARTITION</source>
3280 <translation>Partition</translation>
3283 <source>TOP_PIPE</source>
3284 <translation>Extrusion along a path</translation>
3287 <source>TOP_PLANE</source>
3288 <translation>Create a plane</translation>
3291 <source>TOP_POINT</source>
3292 <translation>Create a point</translation>
3295 <source>TOP_POINT_COORDS</source>
3296 <translation>Point coordinates</translation>
3299 <source>TOP_POINT_ON_EDGE</source>
3300 <translation>Add point on edge</translation>
3303 <source>TOP_POP_COLOR</source>
3304 <translation>Color</translation>
3307 <source>TOP_POP_CREATE_GROUP</source>
3308 <translation>Create Group</translation>
3311 <source>TOP_POP_ISOS</source>
3312 <translation>Isolines</translation>
3315 <source>TOP_POP_RENAME</source>
3316 <translation>Rename</translation>
3319 <source>TOP_POP_SHADING</source>
3320 <translation>Shading</translation>
3323 <source>TOP_POP_TRANSPARENCY</source>
3324 <translation>Transparency</translation>
3327 <source>TOP_POP_WIREFRAME</source>
3328 <translation>Wireframe</translation>
3331 <source>TOP_PROPAGATE</source>
3332 <translation>Propagate</translation>
3335 <source>TOP_Q_FACE</source>
3336 <translation>Quadrangle Face</translation>
3339 <source>TOP_REVOLUTION</source>
3340 <translation>Create a revolution</translation>
3343 <source>TOP_ROTATION</source>
3344 <translation>Rotation</translation>
3347 <source>TOP_SCALE</source>
3348 <translation>Scale transform</translation>
3351 <source>TOP_SECTION</source>
3352 <translation>Section</translation>
3355 <source>TOP_SEWING</source>
3356 <translation>Perform sewing</translation>
3359 <source>TOP_SHADING</source>
3360 <translation>Shading</translation>
3363 <source>TOP_SHADING_COLOR</source>
3364 <translation>Set shading color</translation>
3367 <source>TOP_SHAPE_PROCESS</source>
3368 <translation>Perform shape processing</translation>
3371 <source>TOP_SHELL</source>
3372 <translation>Build a shell</translation>
3375 <source>TOP_SKETCH</source>
3376 <translation>Sketch</translation>
3379 <source>TOP_SOLID</source>
3380 <translation>Build a solid</translation>
3383 <source>TOP_SPHERE</source>
3384 <translation>Create a sphere</translation>
3387 <source>TOP_STEP_VALUE</source>
3388 <translation>Set step value</translation>
3391 <source>TOP_SUPPERSS_HOLES</source>
3392 <translation>Perform suppress holes</translation>
3395 <source>TOP_SUPPRESS_FACES</source>
3396 <translation>Perform suppress faces</translation>
3399 <source>TOP_SUPPRESS_INT_WIRES</source>
3400 <translation>Perform suppress internal wires</translation>
3403 <source>TOP_TOLERANCE</source>
3404 <translation>Compute tolerance</translation>
3407 <source>TOP_TORUS</source>
3408 <translation>Create a torus</translation>
3411 <source>TOP_TRANSLATION</source>
3412 <translation>Translation</translation>
3415 <source>TOP_VECTOR</source>
3416 <translation>Create a vector</translation>
3419 <source>TOP_WHAT_IS</source>
3420 <translation>What is</translation>
3423 <source>TOP_WIRE</source>
3424 <translation>Build a wire</translation>
3427 <source>TOP_WORK_PLANE</source>
3428 <translation>Create a working plane</translation>
3431 <source>WRN_NOT_IMPLEMENTED</source>
3432 <translation>Sorry, this functionality is not yet implemented</translation>
3435 <source>_S_</source>
3436 <translation>(s)</translation>
3439 <source>NOT_FOUND_ANY</source>
3440 <translation>Not a single entity has been found</translation>
3443 <source>GEOM_FACE_I</source>
3444 <translation>Face %1</translation>
3447 <source>GEOM_CONSTANT_RADIUS</source>
3448 <translation>Radius :</translation>
3451 <source>GEOM_R1</source>
3452 <translation>R1 :</translation>
3455 <source>GEOM_R2</source>
3456 <translation>R2 :</translation>
3459 <source>GEOM_BOTHWAY</source>
3460 <translation>Both Directions</translation>
3463 <source>GEOM_NORMALE</source>
3464 <translation>Normal To A Face</translation>
3467 <source>GEOM_VECTOR_NORMALE</source>
3468 <translation>Vector_Normal</translation>
3471 <source>GEOM_LINE1</source>
3472 <translation>Line 1</translation>
3475 <source>GEOM_LINE2</source>
3476 <translation>Line 2</translation>
3479 <source>GEOM_D</source>
3480 <translation>D :</translation>
3483 <source>GEOM_CHAMFER_EDGE</source>
3484 <translation>Chamfer On Selected Edges</translation>
3487 <source>SELECTED_EDGE</source>
3488 <translation>Selected Edges</translation>
3491 <source>GEOM_NORMALE_TITLE</source>
3492 <translation>Create Normal To A Face</translation>
3495 <source>GEOM_MEASURE_ANGLE_TITLE</source>
3496 <translation>Angle Between Two Straight Edges/Lines/Vectors</translation>
3499 <source>GEOM_MEASURE_ANGLE_ANGLE</source>
3500 <translation>Angle</translation>
3503 <source>GEOM_MEASURE_ANGLE_OBJ</source>
3504 <translation>Objects And Results</translation>
3507 <source>GEOM_MEASURE_ANGLE_IS</source>
3508 <translation>Angle in degrees :</translation>
3511 <source>GEOM_LINE_INTERSECTION</source>
3512 <translation>Point On Lines Intersection</translation>
3515 <source>GEOM_KEEP_NONLIMIT_SHAPES</source>
3516 <translation>Keep shapes of lower type</translation>
3519 <source>GEOM_CENTER_2POINTS</source>
3520 <translation>Center and two points</translation>
3523 <source>GEOM_REMOVE_EXTRA_EDGES_TITLE</source>
3524 <translation>Remove extra edges</translation>
3527 <source>GEOM_REMOVE_EXTRA_EDGES</source>
3528 <translation>Object to remove extra edges</translation>
3531 <source>REMOVE_EXTRA_EDGES_NEW_OBJ_NAME</source>
3532 <translation>NoExtraEdges</translation>
3535 <source>TOP_REMOVE_EXTRA_EDGES</source>
3536 <translation>Remove extra edges</translation>
3539 <source>MEN_REMOVE_EXTRA_EDGES</source>
3540 <translation>Remove Extra Edges</translation>
3543 <source>STB_REMOVE_EXTRA_EDGES</source>
3544 <translation>Remove extra edges</translation>
3547 <source>TOP_NORMALE</source>
3548 <translation>Compute normal to a face</translation>
3551 <source>MEN_NORMALE</source>
3552 <translation>Normal to a Face</translation>
3555 <source>STB_NORMALE</source>
3556 <translation>Compute normal to a face in a point (optional)</translation>
3559 <source>TOP_MEASURE_ANGLE</source>
3560 <translation>Compute angle</translation>
3563 <source>MEN_MEASURE_ANGLE</source>
3564 <translation>Angle</translation>
3567 <source>STB_MEASURE_ANGLE</source>
3568 <translation>Compute angle between two lines or linear edges</translation>
3571 <source>TOP_POP_AUTO_COLOR</source>
3572 <translation>Auto color</translation>
3575 <source>MEN_POP_AUTO_COLOR</source>
3576 <translation>Auto Color</translation>
3579 <source>STB_POP_AUTO_COLOR</source>
3580 <translation>Auto color</translation>
3583 <source>TOP_POP_DISABLE_AUTO_COLOR</source>
3584 <translation>Disable auto color</translation>
3587 <source>MEN_POP_DISABLE_AUTO_COLOR</source>
3588 <translation>Disable Auto Color</translation>
3591 <source>STB_POP_DISABLE_AUTO_COLOR</source>
3592 <translation>Disable auto color</translation>
3595 <source>GEOM_RESULT_NAME_GRP</source>
3596 <translation>Result name</translation>
3599 <source>GEOM_RESULT_NAME_LBL</source>
3600 <translation>Name</translation>
3603 <source>GEOM_FILLING_APPROX</source>
3604 <translation>Approximation</translation>
3607 <source>GEOM_WRN_NO_APPROPRIATE_SELECTION</source>
3608 <translation>No appropriate objects selected</translation>
3611 <source>GEOM_SHAPES_ON_SHAPE</source>
3612 <translation>Get shapes on shape</translation>
3615 <source>GEOM_SHAPES_ON_SHAPE_ESHAPE</source>
3616 <translation>Shape for exploding</translation>
3619 <source>GEOM_SHAPES_ON_SHAPE_CSHAPE</source>
3620 <translation>Shape for checking</translation>
3623 <source>GEOM_SHAPES_ON_SHAPE_STATE</source>
3624 <translation>State</translation>
3627 <source>GEOM_KIND_OF_SHAPE</source>
3628 <translation>Kind of Shape :</translation>
3631 <source>GEOM_CLOSED</source>
3632 <translation>Closed</translation>
3635 <source>GEOM_UNCLOSED</source>
3636 <translation>Opened</translation>
3639 <source>GEOM_CLOSEDUNCLOSED</source>
3640 <translation>Not defined, Closed or Opened. Possibly, error occured.</translation>
3643 <source>GEOM_DISK_CIRCLE</source>
3644 <translation>Disk</translation>
3647 <source>GEOM_DISK_ELLIPSE</source>
3648 <translation>Elliptical face</translation>
3651 <source>GEOM_PLANAR_FACE</source>
3652 <translation>Planar Face</translation>
3655 <source>GEOM_POLYGON</source>
3656 <translation>Polygon</translation>
3659 <source>GEOM_NORMAL</source>
3660 <translation>Normal direction</translation>
3663 <source>GEOM_DIRECTION</source>
3664 <translation>Direction</translation>
3667 <source>GEOM_UPARAMETER</source>
3668 <translation>U-parameter :</translation>
3671 <source>GEOM_VPARAMETER</source>
3672 <translation>V-parameter :</translation>
3675 <source>GEOM_X_I</source>
3676 <translation>X%1 :</translation>
3679 <source>GEOM_Y_I</source>
3680 <translation>Y%1 :</translation>
3683 <source>GEOM_Z_I</source>
3684 <translation>Z%1 :</translation>
3687 <source>GEOM_SHAPES_ON_SHAPE_TITLE</source>
3688 <translation>Get shapes on shape</translation>
3691 <source>GEOM_SCALE_FACTOR_X</source>
3692 <translation>Scale Factor X :</translation>
3695 <source>GEOM_SCALE_FACTOR_Y</source>
3696 <translation>Scale Factor Y :</translation>
3699 <source>GEOM_SCALE_FACTOR_Z</source>
3700 <translation>Scale Factor Z :</translation>
3703 <source>GEOM_STATE_IN</source>
3704 <translation>IN</translation>
3707 <source>GEOM_STATE_OUT</source>
3708 <translation>OUT</translation>
3711 <source>GEOM_STATE_ON</source>
3712 <translation>ON</translation>
3715 <source>GEOM_STATE_ONIN</source>
3716 <translation>ONIN</translation>
3719 <source>GEOM_STATE_ONOUT</source>
3720 <translation>ONOUT</translation>
3723 <source>GEOM_STATE_INOUT</source>
3724 <translation>INOUT</translation>
3727 <source>TOP_GET_SHAPES_ON_SHAPES</source>
3728 <translation>Get shapes on shape</translation>
3731 <source>MEN_GET_SHAPES_ON_SHAPES</source>
3732 <translation>Get Shapes on Shape</translation>
3735 <source>STB_GET_SHAPES_ON_SHAPES</source>
3736 <translation>Get shapes on shape</translation>
3739 <source>GEOM_PUBLISH_RESULT_GRP</source>
3740 <translation>Advanced options</translation>
3743 <source>GEOM_RESTORE_SUB_SHAPES</source>
3744 <translation>Set presentation parameters and subshapes from arguments</translation>
3747 <source>GEOM_ALL_IMPORT_FILES</source>
3748 <translation>All supported formats ( %1 )</translation>
3751 <source>GEOM_UNSUPPORTED_TYPE</source>
3752 <translation>Unsupported format for the file</translation>
3755 <source>GEOM_UNKNOWN_IMPORT_ERROR</source>
3756 <translation>Unknown error</translation>
3759 <source>GEOM_IMPORT_ERRORS</source>
3760 <translation>Import operation has finished with errors:</translation>
3764 <name>BasicGUI_EllipseDlg</name>
3766 <source>GEOM_VECTOR_MAJOR</source>
3767 <translation>Major Axis</translation>
3770 <source>ORIGIN_DEFAULT</source>
3771 <translation>Origin by default</translation>
3774 <source>X_AXIS_DEFAULT</source>
3775 <translation>X axis by default</translation>
3778 <source>Z_AXIS_DEFAULT</source>
3779 <translation>Z axis by default</translation>
3783 <name>BasicGUI_MarkerDlg</name>
3785 <source>CAPTION</source>
3786 <translation>Local CS Construction</translation>
3790 <translation>Dx</translation>
3794 <translation>Dy</translation>
3798 <translation>Dz</translation>
3801 <source>LCS_NAME</source>
3802 <translation>LocalCS</translation>
3805 <source>LOCALCS</source>
3806 <translation>Local coordinate system</translation>
3809 <source>ORIGIN</source>
3810 <translation>Coordinates of origin</translation>
3813 <source>VEC_PARALLEL</source>
3814 <translation>Coordinate system axes cannot be parallel</translation>
3817 <source>XDIR</source>
3818 <translation>X axis direction</translation>
3821 <source>YDIR</source>
3822 <translation>Y axis direction</translation>
3826 <name>BlocksGUI_BlockDlg</name>
3828 <source>FACE_1</source>
3829 <translation>Face 1</translation>
3832 <source>FACE_2</source>
3833 <translation>Face 2</translation>
3836 <source>FACE_3</source>
3837 <translation>Face 3</translation>
3840 <source>FACE_4</source>
3841 <translation>Face 4</translation>
3844 <source>FACE_5</source>
3845 <translation>Face 5</translation>
3848 <source>FACE_6</source>
3849 <translation>Face 6</translation>
3853 <name>BlocksGUI_ExplodeDlg</name>
3855 <source>NB_FACES_MAX</source>
3856 <translation>Max. nb. faces</translation>
3859 <source>NB_FACES_MIN</source>
3860 <translation>Min. nb. faces</translation>
3864 <name>BlocksGUI_QuadFaceDlg</name>
3866 <source>EDGE_1</source>
3867 <translation>Edge 1</translation>
3870 <source>EDGE_2</source>
3871 <translation>Edge 2</translation>
3874 <source>EDGE_3</source>
3875 <translation>Edge 3</translation>
3878 <source>EDGE_4</source>
3879 <translation>Edge 4</translation>
3882 <source>VERTEX_1</source>
3883 <translation>Vertex 1</translation>
3886 <source>VERTEX_2</source>
3887 <translation>Vertex 2</translation>
3890 <source>VERTEX_3</source>
3891 <translation>Vertex 3</translation>
3894 <source>VERTEX_4</source>
3895 <translation>Vertex 4</translation>
3899 <name>BlocksGUI_TrsfDlg</name>
3901 <source>FACE_1</source>
3902 <translation>Face 1</translation>
3905 <source>FACE_1U</source>
3906 <translation>Face 1 U</translation>
3909 <source>FACE_1V</source>
3910 <translation>Face 1 V</translation>
3913 <source>FACE_2</source>
3914 <translation>Face 2</translation>
3917 <source>FACE_2U</source>
3918 <translation>Face 2 U</translation>
3921 <source>FACE_2V</source>
3922 <translation>Face 2 V</translation>
3926 <name>EntityGUI_SketcherDlg</name>
3928 <source>CANNOT_CLOSE</source>
3929 <translation>It is impossible to close sketch
3930 Number of sketch points too small</translation>
3934 <name>EntityGUI_SubShapeDlg</name>
3936 <source>NO_SUBSHAPES_SELECTED</source>
3937 <translation>Please, select one or more sub-shapes</translation>
3941 <name>GroupGUI</name>
3943 <source>NO_GROUP</source>
3944 <translation>Please, select a group to edit</translation>
3948 <name>GroupGUI_GroupDlg</name>
3950 <source>ADD</source>
3951 <translation>Add</translation>
3954 <source>CREATE_GROUP_TITLE</source>
3955 <translation>Create Group</translation>
3958 <source>EDIT_GROUP_TITLE</source>
3959 <translation>Edit Group</translation>
3962 <source>EMPTY_LIST</source>
3963 <translation>Please, select one or more sub-shapes to put into the group</translation>
3966 <source>EMPTY_NAME</source>
3967 <translation>Please, specify a non-empty group name</translation>
3970 <source>GROUP_NAME</source>
3971 <translation>Group Name</translation>
3974 <source>GROUP_PREFIX</source>
3975 <translation>Group</translation>
3978 <source>MAIN_SHAPE</source>
3979 <translation>Main Shape</translation>
3982 <source>MAIN_SUB_SHAPES</source>
3983 <translation>Main Shape And Sub-Shapes</translation>
3986 <source>NO_GROUP</source>
3987 <translation>Please, select a group to edit</translation>
3990 <source>NO_MAIN_OBJ</source>
3991 <translation>Please, select a main shape</translation>
3994 <source>REMOVE</source>
3995 <translation>Remove</translation>
3998 <source>SELECT_ALL</source>
3999 <translation>Select All</translation>
4002 <source>SHAPE_SEL_RESTR</source>
4003 <translation>Main Shape Selection restriction</translation>
4006 <source>SHAPE_TYPE</source>
4007 <translation>Shape Type</translation>
4010 <source>NO_RESTR</source>
4011 <translation>No restriction</translation>
4014 <source>GEOM_PARTS_OF_SHAPE2</source>
4015 <translation>Geometrical parts of the Second Shape</translation>
4018 <source>SUBSHAPES_OF_SHAPE2</source>
4019 <translation>Only Sub-Shapes of the Second Shape</translation>
4022 <source>SECOND_SHAPE</source>
4023 <translation>Second Shape</translation>
4027 <name>MeasureGUI_1Sel1TextView1Check_QTD</name>
4029 <source>CHECK_SHAPE_GEOMETRY</source>
4030 <translation>Check also geometry</translation>
4034 <name>MeasureGUI_PointDlg</name>
4036 <source>CAPTION</source>
4037 <translation>Point Coordinates</translation>
4040 <source>COORDINATES</source>
4041 <translation>Point and its coordinates</translation>
4044 <source>POINT</source>
4045 <translation>Point</translation>
4049 <translation>X</translation>
4053 <translation>Y</translation>
4057 <translation>Z</translation>
4061 <name>OperationGUI_ChamferDlg</name>
4064 <translation>D</translation>
4067 <source>FACE_1</source>
4068 <translation>Face 1</translation>
4071 <source>FACE_2</source>
4072 <translation>Face 2</translation>
4075 <source>SELECTED_FACES</source>
4076 <translation>Selected faces</translation>
4080 <name>OperationGUI_FilletDlg</name>
4082 <source>SELECTED_EDGES</source>
4083 <translation>Selected edges</translation>
4086 <source>SELECTED_FACES</source>
4087 <translation>Selected faces</translation>
4091 <name>RepairGUI_FreeBoundDlg</name>
4093 <source>CAPTION</source>
4094 <translation>Check free boundaries</translation>
4097 <source>FREE_BOUND</source>
4098 <translation>Free boundaries</translation>
4101 <source>NUMBER_CLOSED</source>
4102 <translation>Number of closed free boundaries: </translation>
4105 <source>NUMBER_OPEN</source>
4106 <translation>Number of open free boundaries: </translation>
4110 <name>RepairGUI_GlueDlg</name>
4112 <source>FACES_FOR_GLUING_ARE_DETECTED</source>
4113 <translation>There are %1 face(s) that can be glued. They are coloured on the screen with red colour.
4114 Please close this message box and select faces for glueing</translation>
4117 <source>GLUE_FACES</source>
4118 <translation>Glue faces</translation>
4121 <source>SELECT_FACES</source>
4122 <translation>Select Faces</translation>
4125 <source>THERE_ARE_NO_FACES_FOR_GLUING</source>
4126 <translation>There are no faces for gluing</translation>
4130 <name>RepairGUI_ShapeProcessDlg</name>
4132 <source>ERROR_NO_OBJECTS</source>
4133 <translation>Please, select a geometrical object for Shape Processing.</translation>
4136 <source>ERROR_NO_OPERATORS</source>
4137 <translation>Please, select at least one Shape Process operation to proceed.</translation>
4140 <source>TIME_CONSUMING</source>
4141 <translation>Enabling this option may result in a very time-consuming operation for some input shapes.
4142 Would you like to continue?</translation>
4146 <name>GEOMToolsGUI_DeleteDlg</name>
4148 <source>GEOM_REALLY_DELETE</source>
4149 <translation>Do you really want to delete %1 object(s)?</translation>
4152 <source>GEOM_REALLY_DELETE_ALL</source>
4153 <translation>Do you really want to delete all objects?</translation>
4156 <source>GEOM_DELETE_OBJECTS</source>
4157 <translation>Delete objects</translation>