src/GEOMGUI/GEOM_msg_en.ts

   1 <!DOCTYPE TS>
   2 <TS version="1.1" >
   3     <context>
   4         <name>@default</name>
   5         <message>
   6             <source>CHANGE_ORIENTATION_NEW_OBJ_NAME</source>
   7             <translation>Invert</translation>
   8         </message>
   9         <message>
  10             <source>CLOSE_CONTOUR_NEW_OBJ_NAME</source>
  11             <translation>CloseContour</translation>
  12         </message>
  13         <message>
  14             <source>DEP_OBJECT</source>
  15             <translation>Selected object has been used to create another one\n It can't be deleted </translation>
  16         </message>
  17         <message>
  18             <source>DEVIDE_EDGE_NEW_OBJECT_NAME</source>
  19             <translation>NewObject</translation>
  20         </message>
  21         <message>
  22             <source>ERROR_SHAPE_TYPE</source>
  23             <translation>Object of incorrect type selected!\nPlease, select face, shell or solid and try again</translation>
  24         </message>
  25         <message>
  26             <source>GEOM_2D_CONTINUTY</source>
  27             <translation>2D continuity</translation>
  28         </message>
  29         <message>
  30             <source>GEOM_2D_CURVE_MODE</source>
  31             <translation>2D curve mode</translation>
  32         </message>
  33         <message>
  34             <source>GEOM_2D_TOLERANCE</source>
  35             <translation>2D tolerance</translation>
  36         </message>
  37         <message>
  38             <source>GEOM_3D_CONTINUTY</source>
  39             <translation>3D continuity</translation>
  40         </message>
  41         <message>
  42             <source>GEOM_3D_CURVE_MODE</source>
  43             <translation>3D curve mode</translation>
  44         </message>
  45         <message>
  46             <source>GEOM_3D_TOLERANCE</source>
  47             <translation>3D tolerance</translation>
  48         </message>
  49         <message>
  50             <source>GEOM_3_POINTS</source>
  51             <translation>3 points</translation>
  52         </message>
  53         <message>
  54             <source>GEOM_ADD_POINT</source>
  55             <translation>Add point</translation>
  56         </message>
  57         <message>
  58             <source>GEOM_ANGLE</source>
  59             <translation>Angle :</translation>
  60         </message>
  61         <message>
  62             <source>GEOM_ANGLE_1</source>
  63             <translation>Angle</translation>
  64         </message>
  65         <message>
  66             <source>GEOM_ARC</source>
  67             <translation>Arc</translation>
  68         </message>
  69         <message>
  70             <source>GEOM_ARCHIMEDE</source>
  71             <translation>Archimede</translation>
  72         </message>
  73         <message>
  74             <source>GEOM_ARCHIMEDE_TITLE</source>
  75             <translation>Archimede Construction</translation>
  76         </message>
  77         <message>
  78             <source>GEOM_ARC_TITLE</source>
  79             <translation>Arc Construction</translation>
  80         </message>
  81         <message>
  82             <source>GEOM_ARGUMENTS</source>
  83             <translation>Arguments</translation>
  84         </message>
  85         <message>
  86             <source>GEOM_AXE_MIRROR</source>
  87             <translation>Axe Mirror</translation>
  88         </message>
  89         <message>
  90             <source>GEOM_AXIS</source>
  91             <translation>Axis</translation>
  92         </message>
  93         <message>
  94             <source>GEOM_BASE</source>
  95             <translation>Base</translation>
  96         </message>
  97         <message>
  98             <source>GEOM_BASE_OBJECT</source>
  99             <translation>Base Object</translation>
 100         </message>
 101         <message>
 102             <source>GEOM_BASE_POINT</source>
 103             <translation>Base Point</translation>
 104         </message>
 105         <message>
 106             <source>GEOM_BEZIER</source>
 107             <translation>Bezier</translation>
 108         </message>
 109         <message>
 110             <source>GEOM_BLOCK</source>
 111             <translation>Hexahedral Solid</translation>
 112         </message>
 113         <message>
 114             <source>GEOM_BLOCKS_COMPOUND</source>
 115             <translation>BlocksCompound</translation>
 116         </message>
 117         <message>
 118             <source>GEOM_BLOCK_EXPLODE</source>
 119             <translation>Sub Blocks</translation>
 120         </message>
 121         <message>
 122             <source>GEOM_BLOCK_EXPLODE_TITLE</source>
 123             <translation>Sub Blocks Selection</translation>
 124         </message>
 125         <message>
 126             <source>GEOM_BLOCK_MULTITRSF</source>
 127             <translation>Block Multi-Transformation</translation>
 128         </message>
 129         <message>
 130             <source>GEOM_BLOCK_MULTITRSF_DOUBLE</source>
 131             <translation>Multi-Transformation Double</translation>
 132         </message>
 133         <message>
 134             <source>GEOM_BLOCK_MULTITRSF_SIMPLE</source>
 135             <translation>Multi-Transformation Simple</translation>
 136         </message>
 137         <message>
 138             <source>GEOM_BLOCK_MULTITRSF_TITLE</source>
 139             <translation>Block Multi-Transformation</translation>
 140         </message>
 141         <message>
 142             <source>GEOM_BLOCK_TITLE</source>
 143             <translation>Hexahedral Solid Construction</translation>
 144         </message>
 145         <message>
 146             <source>GEOM_BNDBOX</source>
 147             <translation>Bounding Box</translation>
 148         </message>
 149         <message>
 150             <source>GEOM_BNDBOX_OBJDIM</source>
 151             <translation>Object And Its Dimensions</translation>
 152         </message>
 153         <message>
 154             <source>GEOM_BNDBOX_TITLE</source>
 155             <translation>Bounding Box Informations</translation>
 156         </message>
 157         <message>
 158             <source>GEOM_BOX</source>
 159             <translation>Box</translation>
 160         </message>
 161         <message>
 162             <source>GEOM_BOX_OBJ</source>
 163             <translation>Dimensions At Origin</translation>
 164         </message>
 165         <message>
 166             <source>GEOM_BOX_TITLE</source>
 167             <translation>Box Construction</translation>
 168         </message>
 169         <message>
 170             <source>GEOM_BSplineRestriction</source>
 171             <translation>BSplineRestriction</translation>
 172         </message>
 173         <message>
 174             <source>GEOM_BUT_APPLY</source>
 175             <translation>&amp;Apply</translation>
 176         </message>
 177         <message>
 178             <source>GEOM_BUT_CANCEL</source>
 179             <translation>&amp;Cancel</translation>
 180         </message>
 181         <message>
 182             <source>GEOM_BUT_CLOSE</source>
 183             <translation>&amp;Close</translation>
 184         </message>
 185         <message>
 186             <source>GEOM_BUT_CLOSE_SKETCH</source>
 187             <translation>Sketch Closure</translation>
 188         </message>
 189         <message>
 190             <source>GEOM_BUT_END_SKETCH</source>
 191             <translation>Sketch Validation</translation>
 192         </message>
 193         <message>
 194             <source>GEOM_BUT_EXPLODE</source>
 195             <translation>&amp;Explode</translation>
 196         </message>
 197         <message>
 198             <source>GEOM_BUT_HELP</source>
 199             <translation>&amp;Help</translation>
 200         </message>
 201         <message>
 202             <source>GEOM_BUT_NO</source>
 203             <translation>&amp;No</translation>
 204         </message>
 205         <message>
 206             <source>GEOM_BUT_OK</source>
 207             <translation>O&amp;k</translation>
 208         </message>
 209         <message>
 210             <source>GEOM_BUT_YES</source>
 211             <translation>&amp;Yes</translation>
 212         </message>
 213         <message>
 214             <source>GEOM_BY_LENGTH</source>
 215             <translation>By length</translation>
 216         </message>
 217         <message>
 218             <source>GEOM_BY_PARAMETER</source>
 219             <translation>By parameter</translation>
 220         </message>
 221         <message>
 222             <source>GEOM_CENTER</source>
 223             <translation>Center</translation>
 224         </message>
 225         <message>
 226             <source>GEOM_CENTER_POINT</source>
 227             <translation>Center Point</translation>
 228         </message>
 229         <message>
 230             <source>GEOM_CENTRAL_POINT</source>
 231             <translation>Central Point</translation>
 232         </message>
 233         <message>
 234             <source>GEOM_CHAMFER</source>
 235             <translation>Chamfer</translation>
 236         </message>
 237         <message>
 238             <source>GEOM_CHAMFER_ABORT</source>
 239             <translation>Chamfer can't be computed with %1 and %2</translation>
 240         </message>
 241         <message>
 242             <source>GEOM_CHAMFER_ALL</source>
 243             <translation>Chamfer On Whole Shape</translation>
 244         </message>
 245         <message>
 246             <source>GEOM_CHAMFER_EDGES</source>
 247             <translation>Chamfer On Edges From Shape</translation>
 248         </message>
 249         <message>
 250             <source>GEOM_CHAMFER_FACES</source>
 251             <translation>Chamfer On Faces From Shape</translation>
 252         </message>
 253         <message>
 254             <source>GEOM_CHAMFER_TITLE</source>
 255             <translation>Chamfer Construction</translation>
 256         </message>
 257         <message>
 258             <source>GEOM_CHANGE_ORIENTATION</source>
 259             <translation>Objects to change orientation</translation>
 260         </message>
 261         <message>
 262             <source>GEOM_CHANGE_ORIENTATION_TITLE</source>
 263             <translation>Change orientation</translation>
 264         </message>
 265         <message>
 266             <source>GEOM_CHECK_BLOCKS_COMPOUND</source>
 267             <translation>Check and Improve Blocks Compound</translation>
 268         </message>
 269         <message>
 270             <source>GEOM_CHECK_BLOCKS_COMPOUND_ERRORS</source>
 271             <translation>Errors</translation>
 272         </message>
 273         <message>
 274             <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS</source>
 275             <translation>The Compound of Blocks has errors</translation>
 276         </message>
 277         <message>
 278             <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS</source>
 279             <translation>The Compound of Blocks has no errors</translation>
 280         </message>
 281         <message>
 282             <source>GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES</source>
 283             <translation>Incriminated Sub-Shapes</translation>
 284         </message>
 285         <message>
 286             <source>GEOM_CHECK_INFOS</source>
 287             <translation>Object And Its Topological Informations</translation>
 288         </message>
 289         <message>
 290             <source>GEOM_CHECK_SHAPE</source>
 291             <translation>Check Shape</translation>
 292         </message>
 293         <message>
 294             <source>GEOM_CHECK_TITLE</source>
 295             <translation>Check Shape Informations</translation>
 296         </message>
 297         <message>
 298             <source>GEOM_CIRCLE</source>
 299             <translation>Circle</translation>
 300         </message>
 301         <message>
 302             <source>GEOM_CIRCLE_TITLE</source>
 303             <translation>Circle Construction</translation>
 304         </message>
 305         <message>
 306             <source>GEOM_CLOSECONTOUR_TITLE</source>
 307             <translation>Close contour</translation>
 308         </message>
 309         <message>
 310             <source>GEOM_CMASS</source>
 311             <translation>Center Of Mass</translation>
 312         </message>
 313         <message>
 314             <source>GEOM_CMASS_TITLE</source>
 315             <translation>Center Of Mass Construction</translation>
 316         </message>
 317         <message>
 318             <source>GEOM_COMMON</source>
 319             <translation>Common</translation>
 320         </message>
 321         <message>
 322             <source>GEOM_COMMON_TITLE</source>
 323             <translation>BOOLEAN : Common Of Two Objects</translation>
 324         </message>
 325         <message>
 326             <source>GEOM_COMPOUND</source>
 327             <translation>Compound</translation>
 328         </message>
 329         <message>
 330             <source>GEOM_COMPOUNDSOLID</source>
 331             <translation>CompSolid</translation>
 332         </message>
 333         <message>
 334             <source>GEOM_COMPOUND_TITLE</source>
 335             <translation>Create A Compound</translation>
 336         </message>
 337         <message>
 338             <source>GEOM_CONE</source>
 339             <translation>Cone</translation>
 340         </message>
 341         <message>
 342             <source>GEOM_CONE_TITLE</source>
 343             <translation>Cone Construction</translation>
 344         </message>
 345         <message>
 346             <source>GEOM_CONFIRM</source>
 347             <translation>Confirm operation</translation>
 348         </message>
 349         <message>
 350             <source>GEOM_CONFIRM_INFO</source>
 351             <translation>Shape contains %1 sub shapes !</translation>
 352         </message>
 353         <message>
 354             <source>GEOM_COOR</source>
 355             <translation>Coord. :</translation>
 356         </message>
 357         <message>
 358             <source>GEOM_COORDINATES</source>
 359             <translation>Coordinates</translation>
 360         </message>
 361         <message>
 362             <source>GEOM_CREATE_COPY</source>
 363             <translation>Create a copy</translation>
 364         </message>
 365         <message>
 366             <source>GEOM_CREATE_SINGLE_SOLID</source>
 367             <translation>Create a single solid</translation>
 368         </message>
 369         <message>
 370             <source>GEOM_CURVE</source>
 371             <translation>Curve</translation>
 372         </message>
 373         <message>
 374             <source>GEOM_CURVE_CONTINUTY</source>
 375             <translation>Curve continuity</translation>
 376         </message>
 377         <message>
 378             <source>GEOM_CURVE_TITLE</source>
 379             <translation>Curve Construction</translation>
 380         </message>
 381         <message>
 382             <source>GEOM_CUT</source>
 383             <translation>Cut</translation>
 384         </message>
 385         <message>
 386             <source>GEOM_CUT_TITLE</source>
 387             <translation>BOOLEAN : Cut Of Two Objects</translation>
 388         </message>
 389         <message>
 390             <source>GEOM_CYLINDER</source>
 391             <translation>Cylinder</translation>
 392         </message>
 393         <message>
 394             <source>GEOM_CYLINDER_TITLE</source>
 395             <translation>Cylinder Construction</translation>
 396         </message>
 397         <message>
 398             <source>GEOM_D1</source>
 399             <translation>D1 :</translation>
 400         </message>
 401         <message>
 402             <source>GEOM_D2</source>
 403             <translation>D2 :</translation>
 404         </message>
 405         <message>
 406             <source>GEOM_DETECT</source>
 407             <translation>Detect</translation>
 408         </message>
 409         <message>
 410             <source>GEOM_DIAGONAL_POINTS</source>
 411             <translation>Diagonal Points</translation>
 412         </message>
 413         <message>
 414             <source>GEOM_DIMENSIONS</source>
 415             <translation>Dimensions</translation>
 416         </message>
 417         <message>
 418             <source>GEOM_DISTANCE</source>
 419             <translation>Distance</translation>
 420         </message>
 421         <message>
 422             <source>GEOM_DIVIDE_EDGE_TITLE</source>
 423             <translation>Addition of point</translation>
 424         </message>
 425         <message>
 426             <source>GEOM_DX</source>
 427             <translation>Dx :</translation>
 428         </message>
 429         <message>
 430             <source>GEOM_DY</source>
 431             <translation>Dy :</translation>
 432         </message>
 433         <message>
 434             <source>GEOM_DZ</source>
 435             <translation>Dz :</translation>
 436         </message>
 437         <message>
 438             <source>GEOM_DropSmallEdges</source>
 439             <translation>DropSmallEdges</translation>
 440         </message>
 441         <message>
 442             <source>GEOM_EDGE</source>
 443             <translation>Edge</translation>
 444         </message>
 445         <message>
 446             <source>GEOM_EDGE_TITLE</source>
 447             <translation>Create An Edge</translation>
 448         </message>
 449         <message>
 450             <source>GEOM_ELLIPSE</source>
 451             <translation>Ellipse</translation>
 452         </message>
 453         <message>
 454             <source>GEOM_ELLIPSE_ERROR_1</source>
 455             <translation>Error creating ellipse.  Reason: minor radius is greater than major radius.</translation>
 456         </message>
 457         <message>
 458             <source>GEOM_ELLIPSE_TITLE</source>
 459             <translation>Ellipse Construction</translation>
 460         </message>
 461         <message>
 462             <source>GEOM_END_LCS</source>
 463             <translation>End LCS</translation>
 464         </message>
 465         <message>
 466             <source>GEOM_ERROR</source>
 467             <translation>Error</translation>
 468         </message>
 469         <message>
 470             <source>GEOM_ERROR_STATUS</source>
 471             <translation>Operation status</translation>
 472         </message>
 473         <message>
 474             <source>GEOM_ERR_GET_ENGINE</source>
 475             <translation>Failed to obtain GEOM Engine component.  Reload Geometry module and try again.</translation>
 476         </message>
 477         <message>
 478             <source>GEOM_ERR_LIB_NOT_FOUND</source>
 479             <translation>GUI library corresponding to the user action can not be found or loaded</translation>
 480         </message>
 481         <message>
 482             <source>GEOM_EXTRUSION</source>
 483             <translation>Extrusion</translation>
 484         </message>
 485         <message>
 486             <source>GEOM_EXTRUSION_BSV</source>
 487             <translation>Base Shape + Vector</translation>
 488         </message>
 489         <message>
 490             <source>GEOM_EXTRUSION_BSV_2P</source>
 491             <translation>Base Shape + 2 Points</translation>
 492         </message>
 493         <message>
 494             <source>GEOM_EXTRUSION_TITLE</source>
 495             <translation>Construction by Extrusion</translation>
 496         </message>
 497         <message>
 498             <source>GEOM_FACE</source>
 499             <translation>Face</translation>
 500         </message>
 501         <message>
 502             <source>GEOM_FACES</source>
 503             <translation>Faces</translation>
 504         </message>
 505         <message>
 506             <source>GEOM_FACE_FFW</source>
 507             <translation>Face creation from wires and/or edges</translation>
 508         </message>
 509         <message>
 510             <source>GEOM_FACE_OPT</source>
 511             <translation>Try to create a planar face</translation>
 512         </message>
 513         <message>
 514             <source>GEOM_FACE_OR_LCS</source>
 515             <translation>Face or LCS</translation>
 516         </message>
 517         <message>
 518             <source>GEOM_FACE_SELECTION</source>
 519             <translation>Face Selection</translation>
 520         </message>
 521         <message>
 522             <source>GEOM_FACE_TITLE</source>
 523             <translation>Create A Face</translation>
 524         </message>
 525         <message>
 526             <source>GEOM_FILLET</source>
 527             <translation>Fillet</translation>
 528         </message>
 529         <message>
 530             <source>GEOM_FILLET_ABORT</source>
 531             <translation>Fillet can't be computed with radius %1</translation>
 532         </message>
 533         <message>
 534             <source>GEOM_FILLET_ALL</source>
 535             <translation>Fillet On Whole Shape</translation>
 536         </message>
 537         <message>
 538             <source>GEOM_FILLET_EDGES</source>
 539             <translation>Fillet On Edges From Shape</translation>
 540         </message>
 541         <message>
 542             <source>GEOM_FILLET_FACES</source>
 543             <translation>Fillet On Faces From Shape</translation>
 544         </message>
 545         <message>
 546             <source>GEOM_FILLET_TITLE</source>
 547             <translation>Fillet Construction</translation>
 548         </message>
 549         <message>
 550             <source>GEOM_FILLING</source>
 551             <translation>Filling</translation>
 552         </message>
 553         <message>
 554             <source>GEOM_FILLING_ARG</source>
 555             <translation>Arguments And Parameters</translation>
 556         </message>
 557         <message>
 558             <source>GEOM_FILLING_COMPOUND</source>
 559             <translation>Edges compound</translation>
 560         </message>
 561         <message>
 562             <source>GEOM_FILLING_MAX_DEG</source>
 563             <translation>Max deg</translation>
 564         </message>
 565         <message>
 566             <source>GEOM_FILLING_MIN_DEG</source>
 567             <translation>Min deg</translation>
 568         </message>
 569         <message>
 570             <source>GEOM_FILLING_NB_ITER</source>
 571             <translation>Nb. Iter :</translation>
 572         </message>
 573         <message>
 574             <source>GEOM_FILLING_TITLE</source>
 575             <translation>Filling Surface With Edges</translation>
 576         </message>
 577         <message>
 578             <source>GEOM_FILLING_TOL_2D</source>
 579             <translation>Tol. 2D :</translation>
 580         </message>
 581         <message>
 582             <source>GEOM_FILLING_TOL_3D</source>
 583             <translation>Tol. 3D :</translation>
 584         </message>
 585         <message>
 586             <source>GEOM_FREE_BOUNDARIES</source>
 587             <translation>Free boundaries</translation>
 588         </message>
 589         <message>
 590             <source>GEOM_FREE_BOUNDS_ERROR</source>
 591             <translation>Object is not selected</translation>
 592         </message>
 593         <message>
 594             <source>GEOM_FREE_BOUNDS_MSG</source>
 595             <translation>Number of free boundaries detected: %1 (%2 closed, %3 open)</translation>
 596         </message>
 597         <message>
 598             <source>GEOM_FREE_BOUNDS_TLT</source>
 599             <translation>Free boundary detection</translation>
 600         </message>
 601         <message>
 602             <source>GEOM_FREE_FACES</source>
 603             <translation>Free faces</translation>
 604         </message>
 605         <message>
 606             <source>GEOM_FREE_FACES_TITLE</source>
 607             <translation>Free faces</translation>
 608         </message>
 609         <message>
 610             <source>GEOM_FUSE</source>
 611             <translation>Fuse</translation>
 612         </message>
 613         <message>
 614             <source>GEOM_FUSE_TITLE</source>
 615             <translation>BOOLEAN : Fuse Two Objects</translation>
 616         </message>
 617         <message>
 618             <source>GEOM_FixFaceSize</source>
 619             <translation>FixFaceSize</translation>
 620         </message>
 621         <message>
 622             <source>GEOM_FixShape</source>
 623             <translation>FixShape</translation>
 624         </message>
 625         <message>
 626             <source>GEOM_GLUE</source>
 627             <translation>Glue</translation>
 628         </message>
 629         <message>
 630             <source>GEOM_GLUE_TITLE</source>
 631             <translation>Glue faces</translation>
 632         </message>
 633         <message>
 634             <source>GEOM_HEIGHT</source>
 635             <translation>Height :</translation>
 636         </message>
 637         <message>
 638             <source>GEOM_HOLES</source>
 639             <translation>Holes</translation>
 640         </message>
 641         <message>
 642             <source>GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE</source>
 643             <translation>Identical names : select by mouse !</translation>
 644         </message>
 645         <message>
 646             <source>GEOM_IMPORT</source>
 647             <translation>Imported_Shape</translation>
 648         </message>
 649         <message>
 650             <source>GEOM_INCORRECT_INPUT</source>
 651             <translation>Incorrect input data!</translation>
 652         </message>
 653         <message>
 654             <source>GEOM_INERTIA_CONSTR</source>
 655             <translation>Matrix And Moments Of Inertia</translation>
 656         </message>
 657         <message>
 658             <source>GEOM_INERTIA_I</source>
 659             <translation>%1:1 :</translation>
 660         </message>
 661         <message>
 662             <source>GEOM_INERTIA_IXYZ</source>
 663             <translation>IX &amp; IY &amp; IZ :</translation>
 664         </message>
 665         <message>
 666             <source>GEOM_INERTIA_TITLE</source>
 667             <translation>Calculs Of Inertia</translation>
 668         </message>
 669         <message>
 670             <source>GEOM_INF_LOADED</source>
 671             <translation>File %1 loaded.</translation>
 672         </message>
 673         <message>
 674             <source>GEOM_INTERNAL_WIRES</source>
 675             <translation>Internal wires</translation>
 676         </message>
 677         <message>
 678             <source>GEOM_INTERPOL</source>
 679             <translation>Interpolation</translation>
 680         </message>
 681         <message>
 682             <source>GEOM_KEEP_OBJECT</source>
 683             <translation>Keep Object</translation>
 684         </message>
 685         <message>
 686             <source>GEOM_LENGTH</source>
 687             <translation>Length :</translation>
 688         </message>
 689         <message>
 690             <source>GEOM_LINE</source>
 691             <translation>Line</translation>
 692         </message>
 693         <message>
 694             <source>GEOM_LINE_TITLE</source>
 695             <translation>Line Construction</translation>
 696         </message>
 697         <message>
 698             <source>GEOM_MAIN_OBJECT</source>
 699             <translation>Main Object</translation>
 700         </message>
 701         <message>
 702             <source>GEOM_MARKER</source>
 703             <translation>Marker</translation>
 704         </message>
 705         <message>
 706             <source>GEOM_MARKER_TITLE</source>
 707             <translation>Create marker</translation>
 708         </message>
 709         <message>
 710             <source>GEOM_MATERIAL_ID</source>
 711             <translation>Material ID:</translation>
 712         </message>
 713         <message>
 714             <source>GEOM_MATERIAL_MATERIAL</source>
 715             <translation>Material</translation>
 716         </message>
 717         <message>
 718             <source>GEOM_MATERIAL_SET</source>
 719             <translation>&lt;&lt; Set</translation>
 720         </message>
 721         <message>
 722             <source>GEOM_MATERIAL_SHAPE</source>
 723             <translation>Shapes</translation>
 724         </message>
 725         <message>
 726             <source>GEOM_MATERIAL_TITLE</source>
 727             <translation>Define materials for Dominant Fuse</translation>
 728         </message>
 729         <message>
 730             <source>GEOM_MATRIX</source>
 731             <translation>Matrix :</translation>
 732         </message>
 733         <message>
 734             <source>GEOM_MAX</source>
 735             <translation>Max :</translation>
 736         </message>
 737         <message>
 738             <source>GEOM_MAX_3D_TOLERANCE</source>
 739             <translation>Max 3D tolerance</translation>
 740         </message>
 741         <message>
 742             <source>GEOM_MAX_TOLERANCE</source>
 743             <translation>Max tolerance</translation>
 744         </message>
 745         <message>
 746             <source>GEOM_MEN_ALL_FILES</source>
 747             <translation>All Files ( * )</translation>
 748         </message>
 749         <message>
 750             <source>GEOM_MEN_ANGLE</source>
 751             <translation>Angle :</translation>
 752         </message>
 753         <message>
 754             <source>GEOM_MEN_COMPONENT</source>
 755             <translation>Geometry</translation>
 756         </message>
 757         <message>
 758             <source>GEOM_MEN_ENTER_ANGLE</source>
 759             <translation>Enter An Angle In Degrees</translation>
 760         </message>
 761         <message>
 762             <source>GEOM_MEN_EXPORT</source>
 763             <translation>Export</translation>
 764         </message>
 765         <message>
 766             <source>GEOM_MEN_IMPORT</source>
 767             <translation>Import</translation>
 768         </message>
 769         <message>
 770             <source>GEOM_MEN_ISOS</source>
 771             <translation>Select Number Of Isos</translation>
 772         </message>
 773         <message>
 774             <source>GEOM_MEN_ISOU</source>
 775             <translation>Isos u :</translation>
 776         </message>
 777         <message>
 778             <source>GEOM_MEN_ISOV</source>
 779             <translation>Isos v :</translation>
 780         </message>
 781         <message>
 782             <source>GEOM_MEN_POPUP_NAME</source>
 783             <translation>%1 Objects</translation>
 784         </message>
 785         <message>
 786             <source>GEOM_MEN_SHADING</source>
 787             <translation>\nShading</translation>
 788         </message>
 789         <message>
 790             <source>GEOM_MEN_SKETCHER_X</source>
 791             <translation>Enter a length to set X</translation>
 792         </message>
 793         <message>
 794             <source>GEOM_MEN_SKETCHER_Y</source>
 795             <translation>Enter a length to set Y</translation>
 796         </message>
 797         <message>
 798             <source>GEOM_MEN_STEP_LABEL</source>
 799             <translation>Step :</translation>
 800         </message>
 801         <message>
 802             <source>GEOM_MEN_TRANSPARENCY</source>
 803             <translation>Transparency</translation>
 804         </message>
 805         <message>
 806             <source>GEOM_MEN_TRANSPARENCY_LABEL</source>
 807             <translation>Transparency :</translation>
 808         </message>
 809         <message>
 810             <source>GEOM_MEN_WIREFRAME</source>
 811             <translation>Wireframe</translation>
 812         </message>
 813         <message>
 814             <source>GEOM_MEN_X</source>
 815             <translation>X :</translation>
 816         </message>
 817         <message>
 818             <source>GEOM_MEN_Y</source>
 819             <translation>Y :</translation>
 820         </message>
 821         <message>
 822             <source>GEOM_MESHING_DEFLECTION</source>
 823             <translation>Meshing Deflect. :</translation>
 824         </message>
 825         <message>
 826             <source>GEOM_MIN</source>
 827             <translation>Min :</translation>
 828         </message>
 829         <message>
 830             <source>GEOM_MINDIST_OBJ</source>
 831             <translation>Objects And Results</translation>
 832         </message>
 833         <message>
 834             <source>GEOM_MINDIST_TITLE</source>
 835             <translation>Minimun Distance Between Two Objects</translation>
 836         </message>
 837         <message>
 838             <source>GEOM_MIRROR</source>
 839             <translation>Mirror</translation>
 840         </message>
 841         <message>
 842             <source>GEOM_MIRROR_TITLE</source>
 843             <translation>Mirror An Object</translation>
 844         </message>
 845         <message>
 846             <source>GEOM_MULTIROTATION</source>
 847             <translation>Multi-Rotation</translation>
 848         </message>
 849         <message>
 850             <source>GEOM_MULTIROTATION_DOUBLE</source>
 851             <translation>Multi Rotation Double</translation>
 852         </message>
 853         <message>
 854             <source>GEOM_MULTIROTATION_SIMPLE</source>
 855             <translation>Multi Rotation Simple</translation>
 856         </message>
 857         <message>
 858             <source>GEOM_MULTIROTATION_TITLE</source>
 859             <translation>Multi-Rotation</translation>
 860         </message>
 861         <message>
 862             <source>GEOM_MULTITRANSLATION</source>
 863             <translation>Multi-Translation</translation>
 864         </message>
 865         <message>
 866             <source>GEOM_MULTITRANSLATION_DOUBLE</source>
 867             <translation>Multi Translation Double</translation>
 868         </message>
 869         <message>
 870             <source>GEOM_MULTITRANSLATION_SIMPLE</source>
 871             <translation>Multi Translation Simple</translation>
 872         </message>
 873         <message>
 874             <source>GEOM_MULTITRANSLATION_TITLE</source>
 875             <translation>Multi-Translation</translation>
 876         </message>
 877         <message>
 878             <source>GEOM_NAME_INCORRECT</source>
 879             <translation>Object name not found</translation>
 880         </message>
 881         <message>
 882             <source>GEOM_NB_BLOCKS_NO_OTHERS</source>
 883             <translation>There are %1 specified blocks and NO other solids</translation>
 884         </message>
 885         <message>
 886             <source>GEOM_NB_BLOCKS_SOME_OTHERS</source>
 887             <translation>There are %1 specified blocks and some other solids</translation>
 888         </message>
 889         <message>
 890             <source>GEOM_NB_TIMES</source>
 891             <translation>Nb. Times :</translation>
 892         </message>
 893         <message>
 894             <source>GEOM_NB_TIMES_U</source>
 895             <translation>Nb. Times U :</translation>
 896         </message>
 897         <message>
 898             <source>GEOM_NB_TIMES_V</source>
 899             <translation>Nb. Times V :</translation>
 900         </message>
 901         <message>
 902             <source>GEOM_NODES</source>
 903             <translation>Nodes</translation>
 904         </message>
 905         <message>
 906             <source>GEOM_NUM_SPLIT_POINTS</source>
 907             <translation>Number of splitting points</translation>
 908         </message>
 909         <message>
 910             <source>GEOM_OBJECT</source>
 911             <translation>Object</translation>
 912         </message>
 913         <message>
 914             <source>GEOM_OBJECTS</source>
 915             <translation>Objects</translation>
 916         </message>
 917         <message>
 918             <source>GEOM_OBJECT_I</source>
 919             <translation>Object %1</translation>
 920         </message>
 921         <message>
 922             <source>GEOM_OBJECT_RESULT</source>
 923             <translation>Object And Result</translation>
 924         </message>
 925         <message>
 926             <source>GEOM_OFFSET</source>
 927             <translation>Offset</translation>
 928         </message>
 929         <message>
 930             <source>GEOM_OFFSET_TITLE</source>
 931             <translation>Offset Surface</translation>
 932         </message>
 933         <message>
 934             <source>GEOM_OPERATIONS</source>
 935             <translation>Operations</translation>
 936         </message>
 937         <message>
 938             <source>GEOM_ORIENTATION</source>
 939             <translation>Orientation</translation>
 940         </message>
 941         <message>
 942             <source>GEOM_ORIENTATION_OPT</source>
 943             <translation>Reverse orientation with normal vectors simulation</translation>
 944         </message>
 945         <message>
 946             <source>GEOM_ORIENTATION_TITLE</source>
 947             <translation>Change Orientation</translation>
 948         </message>
 949         <message>
 950             <source>GEOM_PARAMETER</source>
 951             <translation>Parameter :</translation>
 952         </message>
 953         <message>
 954             <source>GEOM_PARAMETERS</source>
 955             <translation>Parameters</translation>
 956         </message>
 957         <message>
 958             <source>GEOM_PARAM_POINT</source>
 959             <translation>Parametric point</translation>
 960         </message>
 961         <message>
 962             <source>GEOM_PARTITION</source>
 963             <translation>Partition</translation>
 964         </message>
 965         <message>
 966             <source>GEOM_PARTITION_HALFSPACE</source>
 967             <translation>Half-space partition</translation>
 968         </message>
 969         <message>
 970             <source>GEOM_PARTITION_ORIENTATION</source>
 971             <translation>Change Orientation</translation>
 972         </message>
 973         <message>
 974             <source>GEOM_PARTITION_TITLE</source>
 975             <translation>Partition Of Object With Tool</translation>
 976         </message>
 977         <message>
 978             <source>GEOM_PATH_OBJECT</source>
 979             <translation>Path Object</translation>
 980         </message>
 981         <message>
 982             <source>GEOM_PIPE</source>
 983             <translation>Pipe</translation>
 984         </message>
 985         <message>
 986             <source>GEOM_PIPE_TITLE</source>
 987             <translation>Pipe Construction</translation>
 988         </message>
 989         <message>
 990             <source>GEOM_PLANE</source>
 991             <translation>Plane</translation>
 992         </message>
 993         <message>
 994             <source>GEOM_PLANE_MIRROR</source>
 995             <translation>Plane Mirror</translation>
 996         </message>
 997         <message>
 998             <source>GEOM_PLANE_PV</source>
 999             <translation>Point + Vector</translation>
1000         </message>
1001         <message>
1002             <source>GEOM_PLANE_PVC</source>
1003             <translation>Point + Coordinate Vector</translation>
1004         </message>
1005         <message>
1006             <source>GEOM_PLANE_SIZE</source>
1007             <translation>Size of plane :</translation>
1008         </message>
1009         <message>
1010             <source>GEOM_PLANE_TITLE</source>
1011             <translation>Plane Construction</translation>
1012         </message>
1013         <message>
1014             <source>GEOM_POINT</source>
1015             <translation>Point</translation>
1016         </message>
1017         <message>
1018             <source>GEOM_POINT1</source>
1019             <translation>Point 1</translation>
1020         </message>
1021         <message>
1022             <source>GEOM_POINT2</source>
1023             <translation>Point 2</translation>
1024         </message>
1025         <message>
1026             <source>GEOM_POINT3</source>
1027             <translation>Point 3</translation>
1028         </message>
1029         <message>
1030             <source>GEOM_POINTS</source>
1031             <translation>Points</translation>
1032         </message>
1033         <message>
1034             <source>GEOM_POINT_I</source>
1035             <translation>Point %1</translation>
1036         </message>
1037         <message>
1038             <source>GEOM_POINT_MIRROR</source>
1039             <translation>Point Mirror</translation>
1040         </message>
1041         <message>
1042             <source>GEOM_POINT_TITLE</source>
1043             <translation>Point Construction</translation>
1044         </message>
1045         <message>
1046             <source>GEOM_POLYLINE</source>
1047             <translation>Polyline</translation>
1048         </message>
1049         <message>
1050             <source>GEOM_POSITION</source>
1051             <translation>Location</translation>
1052         </message>
1053         <message>
1054             <source>GEOM_POSITION_TITLE</source>
1055             <translation>Modify the Location of an Object</translation>
1056         </message>
1057         <message>
1058             <source>GEOM_PRECISION</source>
1059             <translation>Precision :</translation>
1060         </message>
1061         <message>
1062             <source>GEOM_PROPAGATE</source>
1063             <translation>Propagate</translation>
1064         </message>
1065         <message>
1066             <source>GEOM_PROPAGATE_TITLE</source>
1067             <translation>Propagate</translation>
1068         </message>
1069         <message>
1070             <source>GEOM_PROPERTIES</source>
1071             <translation>Basic Properties</translation>
1072         </message>
1073         <message>
1074             <source>GEOM_PROPERTIES_CONSTR</source>
1075             <translation>Object And Its Properties</translation>
1076         </message>
1077         <message>
1078             <source>GEOM_PROPERTIES_SURFACE</source>
1079             <translation>Surface is :</translation>
1080         </message>
1081         <message>
1082             <source>GEOM_PROPERTIES_TITLE</source>
1083             <translation>Basic Properties Informations</translation>
1084         </message>
1085         <message>
1086             <source>GEOM_PROPERTIES_VOLUME</source>
1087             <translation>Volume is :</translation>
1088         </message>
1089         <message>
1090             <source>GEOM_PRP_ABORT</source>
1091             <translation>Operation aborted</translation>
1092         </message>
1093         <message>
1094             <source>GEOM_PRP_COMMAND</source>
1095             <translation>No command associated with this id = %1.</translation>
1096         </message>
1097         <message>
1098             <source>GEOM_PRP_DONE</source>
1099             <translation>Operation done</translation>
1100         </message>
1101         <message>
1102             <source>GEOM_PRP_EXPORT</source>
1103             <translation>Exporting geometry to %1 ...</translation>
1104         </message>
1105         <message>
1106             <source>GEOM_PRP_LOADING</source>
1107             <translation>Loading %1 ...</translation>
1108         </message>
1109         <message>
1110             <source>GEOM_PRP_MIN_DIST</source>
1111             <translation>Min Distance not computed</translation>
1112         </message>
1113         <message>
1114             <source>GEOM_PRP_NOT_FOR_VTK_VIEWER</source>
1115             <translation>Not allowed in VTK viewer</translation>
1116         </message>
1117         <message>
1118             <source>GEOM_PRP_NULLSHAPE</source>
1119             <translation>Error, null or inappropriate shape !</translation>
1120         </message>
1121         <message>
1122             <source>GEOM_PRP_READY</source>
1123             <translation>Ready</translation>
1124         </message>
1125         <message>
1126             <source>GEOM_PRP_SELECT_EDGE</source>
1127             <translation>Select edges and click on Apply</translation>
1128         </message>
1129         <message>
1130             <source>GEOM_PRP_SELECT_FACE</source>
1131             <translation>Select faces to suppress and click on Ok/Apply</translation>
1132         </message>
1133         <message>
1134             <source>GEOM_PRP_SELECT_FIRST</source>
1135             <translation>Select main shape first</translation>
1136         </message>
1137         <message>
1138             <source>GEOM_PRP_SELECT_SUBSHAPES</source>
1139             <translation>Select Sub Shapes</translation>
1140         </message>
1141         <message>
1142             <source>GEOM_PRP_SHAPE_IN_STUDY</source>
1143             <translation>Main shape must be in the study before</translation>
1144         </message>
1145         <message>
1146             <source>GEOM_QUAD_FACE</source>
1147             <translation>Quadrangle Face</translation>
1148         </message>
1149         <message>
1150             <source>GEOM_QUAD_FACE_TITLE</source>
1151             <translation>Quadrangle Face Construction</translation>
1152         </message>
1153         <message>
1154             <source>GEOM_RADIUS</source>
1155             <translation>Radius :</translation>
1156         </message>
1157         <message>
1158             <source>GEOM_RADIUS_I</source>
1159             <translation>Radius %1 :</translation>
1160         </message>
1161         <message>
1162             <source>GEOM_RADIUS_MAJOR</source>
1163             <translation>Major radius :</translation>
1164         </message>
1165         <message>
1166             <source>GEOM_RADIUS_MINOR</source>
1167             <translation>Minor radius :</translation>
1168         </message>
1169         <message>
1170             <source>GEOM_REALLY_DELETE</source>
1171             <translation>Do you really want to delete this %1 object(s):</translation>
1172         </message>
1173         <message>
1174             <source>GEOM_RECONSTRUCTION_LIMIT</source>
1175             <translation>Reconstruction Limit</translation>
1176         </message>
1177         <message>
1178             <source>GEOM_RECONSTRUCTION_LIMIT_EDGE</source>
1179             <translation>Edge</translation>
1180         </message>
1181         <message>
1182             <source>GEOM_RECONSTRUCTION_LIMIT_FACE</source>
1183             <translation>Face</translation>
1184         </message>
1185         <message>
1186             <source>GEOM_RECONSTRUCTION_LIMIT_SHAPE</source>
1187             <translation>Shape</translation>
1188         </message>
1189         <message>
1190             <source>GEOM_RECONSTRUCTION_LIMIT_SHELL</source>
1191             <translation>Shell</translation>
1192         </message>
1193         <message>
1194             <source>GEOM_RECONSTRUCTION_LIMIT_SOLID</source>
1195             <translation>Solid</translation>
1196         </message>
1197         <message>
1198             <source>GEOM_RECONSTRUCTION_LIMIT_VERTEX</source>
1199             <translation>Vertex</translation>
1200         </message>
1201         <message>
1202             <source>GEOM_RECONSTRUCTION_LIMIT_WIRE</source>
1203             <translation>Wire</translation>
1204         </message>
1205         <message>
1206             <source>GEOM_REF_POINT</source>
1207             <translation>Point with reference</translation>
1208         </message>
1209         <message>
1210             <source>GEOM_REMOVE_ALL_HOLES</source>
1211             <translation>Remove all holes</translation>
1212         </message>
1213         <message>
1214             <source>GEOM_REMOVE_ALL_INT_WIRES</source>
1215             <translation>Remove all internal wires</translation>
1216         </message>
1217         <message>
1218             <source>GEOM_REMOVE_HOLES_TITLE</source>
1219             <translation>Suppress holes</translation>
1220         </message>
1221         <message>
1222             <source>GEOM_REMOVE_INTERNAL_WIRES_TITLE</source>
1223             <translation>Suppress internal wires</translation>
1224         </message>
1225         <message>
1226             <source>GEOM_REMOVE_WEBS</source>
1227             <translation>Remove webs</translation>
1228         </message>
1229         <message>
1230             <source>GEOM_REQUIRED_DEGREE</source>
1231             <translation>Required degree</translation>
1232         </message>
1233         <message>
1234             <source>GEOM_REQUIRED_NUM_SEGMENTS</source>
1235             <translation>Required number of segments</translation>
1236         </message>
1237         <message>
1238             <source>GEOM_REVERSE</source>
1239             <translation>Reverse</translation>
1240         </message>
1241         <message>
1242             <source>GEOM_REVERSE_PLANE</source>
1243             <translation>Reverse the plane normal</translation>
1244         </message>
1245         <message>
1246             <source>GEOM_REVERSE_U</source>
1247             <translation>Reverse U</translation>
1248         </message>
1249         <message>
1250             <source>GEOM_REVERSE_V</source>
1251             <translation>Reverse V</translation>
1252         </message>
1253         <message>
1254             <source>GEOM_REVERSE_VECTOR</source>
1255             <translation>Reverse Vector</translation>
1256         </message>
1257         <message>
1258             <source>GEOM_REVOLUTION</source>
1259             <translation>Revolution</translation>
1260         </message>
1261         <message>
1262             <source>GEOM_REVOLUTION_TITLE</source>
1263             <translation>Construction By Revolution</translation>
1264         </message>
1265         <message>
1266             <source>GEOM_ROTATION</source>
1267             <translation>Rotation</translation>
1268         </message>
1269         <message>
1270             <source>GEOM_ROTATION_TITLE</source>
1271             <translation>Rotation Of An Object</translation>
1272         </message>
1273         <message>
1274             <source>GEOM_SCALE</source>
1275             <translation>Scale</translation>
1276         </message>
1277         <message>
1278             <source>GEOM_SCALE_FACTOR</source>
1279             <translation>Scale Factor :</translation>
1280         </message>
1281         <message>
1282             <source>GEOM_SCALE_TITLE</source>
1283             <translation>Scale An Object</translation>
1284         </message>
1285         <message>
1286             <source>GEOM_SECTION</source>
1287             <translation>Section</translation>
1288         </message>
1289         <message>
1290             <source>GEOM_SECTION_TITLE</source>
1291             <translation>BOOLEAN : Section Of Two Objects</translation>
1292         </message>
1293         <message>
1294             <source>GEOM_SELECTED_FACE</source>
1295             <translation>Selected face</translation>
1296         </message>
1297         <message>
1298             <source>GEOM_SELECTED_OBJECTS</source>
1299             <translation>Selected objects</translation>
1300         </message>
1301         <message>
1302             <source>GEOM_SELECTED_SHAPE</source>
1303             <translation>Selected shape</translation>
1304         </message>
1305         <message>
1306             <source>GEOM_SELECTION</source>
1307             <translation>Selection</translation>
1308         </message>
1309         <message>
1310             <source>GEOM_SET_MATERIALS</source>
1311             <translation>Set materials</translation>
1312         </message>
1313         <message>
1314             <source>GEOM_SEWING</source>
1315             <translation>Sewing</translation>
1316         </message>
1317         <message>
1318             <source>GEOM_SEWING_TITLE</source>
1319             <translation>Topological sewing</translation>
1320         </message>
1321         <message>
1322             <source>GEOM_SHAPE</source>
1323             <translation>Shape</translation>
1324         </message>
1325         <message>
1326             <source>GEOM_SHAPEPROCESS_TITLE</source>
1327             <translation>Shape Processing</translation>
1328         </message>
1329         <message>
1330             <source>GEOM_SHAPES</source>
1331             <translation>Shapes</translation>
1332         </message>
1333         <message>
1334             <source>GEOM_SHELL</source>
1335             <translation>Shell</translation>
1336         </message>
1337         <message>
1338             <source>GEOM_SHELLS</source>
1339             <translation>Shells</translation>
1340         </message>
1341         <message>
1342             <source>GEOM_SHELL_TITLE</source>
1343             <translation>Shell Construction</translation>
1344         </message>
1345         <message>
1346             <source>GEOM_SKETCHER_ABS</source>
1347             <translation>Absolute</translation>
1348         </message>
1349         <message>
1350             <source>GEOM_SKETCHER_ANGLE</source>
1351             <translation>Angle</translation>
1352         </message>
1353         <message>
1354             <source>GEOM_SKETCHER_ANGLE2</source>
1355             <translation>Angle :</translation>
1356         </message>
1357         <message>
1358             <source>GEOM_SKETCHER_APPLY</source>
1359             <translation>Apply</translation>
1360         </message>
1361         <message>
1362             <source>GEOM_SKETCHER_ARC</source>
1363             <translation>Arc</translation>
1364         </message>
1365         <message>
1366             <source>GEOM_SKETCHER_DEST</source>
1367             <translation>Destination</translation>
1368         </message>
1369         <message>
1370             <source>GEOM_SKETCHER_DIR</source>
1371             <translation>Direction</translation>
1372         </message>
1373         <message>
1374             <source>GEOM_SKETCHER_DX2</source>
1375             <translation>DX :</translation>
1376         </message>
1377         <message>
1378             <source>GEOM_SKETCHER_DY2</source>
1379             <translation>DY :</translation>
1380         </message>
1381         <message>
1382             <source>GEOM_SKETCHER_EL</source>
1383             <translation>Element Type</translation>
1384         </message>
1385         <message>
1386             <source>GEOM_SKETCHER_LENGTH</source>
1387             <translation>Length</translation>
1388         </message>
1389         <message>
1390             <source>GEOM_SKETCHER_LENGTH2</source>
1391             <translation>Length :</translation>
1392         </message>
1393         <message>
1394             <source>GEOM_SKETCHER_PER</source>
1395             <translation>Perpendicular</translation>
1396         </message>
1397         <message>
1398             <source>GEOM_SKETCHER_POINT</source>
1399             <translation>Point</translation>
1400         </message>
1401         <message>
1402             <source>GEOM_SKETCHER_POINT2</source>
1403             <translation>Point :</translation>
1404         </message>
1405         <message>
1406             <source>GEOM_SKETCHER_RADIUS2</source>
1407             <translation>Radius :</translation>
1408         </message>
1409         <message>
1410             <source>GEOM_SKETCHER_REL</source>
1411             <translation>Relative</translation>
1412         </message>
1413         <message>
1414             <source>GEOM_SKETCHER_SEGMENT</source>
1415             <translation>Segment</translation>
1416         </message>
1417         <message>
1418             <source>GEOM_SKETCHER_SEL</source>
1419             <translation>Selection</translation>
1420         </message>
1421         <message>
1422             <source>GEOM_SKETCHER_TAN</source>
1423             <translation>Tangent</translation>
1424         </message>
1425         <message>
1426             <source>GEOM_SKETCHER_TITLE</source>
1427             <translation>Sketch Construction</translation>
1428         </message>
1429         <message>
1430             <source>GEOM_SKETCHER_TYPE</source>
1431             <translation>Type</translation>
1432         </message>
1433         <message>
1434             <source>GEOM_SKETCHER_UNDO</source>
1435             <translation>Undo</translation>
1436         </message>
1437         <message>
1438             <source>GEOM_SKETCHER_VALUES</source>
1439             <translation>Values</translation>
1440         </message>
1441         <message>
1442             <source>GEOM_SKETCHER_VX2</source>
1443             <translation>VX :</translation>
1444         </message>
1445         <message>
1446             <source>GEOM_SKETCHER_VXVY</source>
1447             <translation>VX-VY</translation>
1448         </message>
1449         <message>
1450             <source>GEOM_SKETCHER_VY2</source>
1451             <translation>VY :</translation>
1452         </message>
1453         <message>
1454             <source>GEOM_SKETCHER_X</source>
1455             <translation>X</translation>
1456         </message>
1457         <message>
1458             <source>GEOM_SKETCHER_X2</source>
1459             <translation>X :</translation>
1460         </message>
1461         <message>
1462             <source>GEOM_SKETCHER_X3</source>
1463             <translation>Abs. X :</translation>
1464         </message>
1465         <message>
1466             <source>GEOM_SKETCHER_Y</source>
1467             <translation>Y</translation>
1468         </message>
1469         <message>
1470             <source>GEOM_SKETCHER_Y2</source>
1471             <translation>Y :</translation>
1472         </message>
1473         <message>
1474             <source>GEOM_SKETCHER_Y3</source>
1475             <translation>Abs. Y :</translation>
1476         </message>
1477         <message>
1478             <source>GEOM_SOLID</source>
1479             <translation>Solid</translation>
1480         </message>
1481         <message>
1482             <source>GEOM_SOLID_TITLE</source>
1483             <translation>Solid Construction</translation>
1484         </message>
1485         <message>
1486             <source>GEOM_SPHERE</source>
1487             <translation>Sphere</translation>
1488         </message>
1489         <message>
1490             <source>GEOM_SPHERE_CR</source>
1491             <translation>Center + Radius</translation>
1492         </message>
1493         <message>
1494             <source>GEOM_SPHERE_RO</source>
1495             <translation>Radius At Origin</translation>
1496         </message>
1497         <message>
1498             <source>GEOM_SPHERE_TITLE</source>
1499             <translation>Sphere Construction</translation>
1500         </message>
1501         <message>
1502             <source>GEOM_SPLINE</source>
1503             <translation>Spline</translation>
1504         </message>
1505         <message>
1506             <source>GEOM_SPLINE_TITLE</source>
1507             <translation>Spline Construction</translation>
1508         </message>
1509         <message>
1510             <source>GEOM_START_LCS</source>
1511             <translation>Start LCS</translation>
1512         </message>
1513         <message>
1514             <source>GEOM_STEP</source>
1515             <translation>Step :</translation>
1516         </message>
1517         <message>
1518             <source>GEOM_STEP_TITLE</source>
1519             <translation>Step value for GUI constructions</translation>
1520         </message>
1521         <message>
1522             <source>GEOM_STEP_U</source>
1523             <translation>Step U :</translation>
1524         </message>
1525         <message>
1526             <source>GEOM_STEP_V</source>
1527             <translation>Step V :</translation>
1528         </message>
1529         <message>
1530             <source>GEOM_STUDY_LOCKED</source>
1531             <translation>The active study is locked and therefore cannot be modified</translation>
1532         </message>
1533         <message>
1534             <source>GEOM_SUBSHAPE_SELECT</source>
1535             <translation>Select Sub Shapes</translation>
1536         </message>
1537         <message>
1538             <source>GEOM_SUBSHAPE_TITLE</source>
1539             <translation>Sub Shapes Selection</translation>
1540         </message>
1541         <message>
1542             <source>GEOM_SUBSHAPE_TYPE</source>
1543             <translation>Sub Shapes Type :</translation>
1544         </message>
1545         <message>
1546             <source>GEOM_SUB_SHAPE</source>
1547             <translation>Sub Shapes</translation>
1548         </message>
1549         <message>
1550             <source>GEOM_SUPPRESSHOLE_FACE_SHELL</source>
1551             <translation>Face or shell</translation>
1552         </message>
1553         <message>
1554             <source>GEOM_SUPPRESSHOLE_SELECTFACE</source>
1555             <translation>Select the face with hole</translation>
1556         </message>
1557         <message>
1558             <source>GEOM_SUPPRESSHOLE_SELECTFACE_END</source>
1559             <translation>Select end face (if hole traversing)</translation>
1560         </message>
1561         <message>
1562             <source>GEOM_SUPPRESSHOLE_SELECTWIRE</source>
1563             <translation>Select wire on face</translation>
1564         </message>
1565         <message>
1566             <source>GEOM_SUPPRESSHOLE_SELECTWIRE_END</source>
1567             <translation>Select end wire (if hole traversing)</translation>
1568         </message>
1569         <message>
1570             <source>GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE</source>
1571             <translation>Select hole(s) on the face</translation>
1572         </message>
1573         <message>
1574             <source>GEOM_SUPPRESSHOLE_TITLE</source>
1575             <translation>Suppress holes</translation>
1576         </message>
1577         <message>
1578             <source>GEOM_SUPPRESS_RESULT</source>
1579             <translation>Suppress Result</translation>
1580         </message>
1581         <message>
1582             <source>GEOM_SUPPRESS_RESULT_INSIDE</source>
1583             <translation>Inside</translation>
1584         </message>
1585         <message>
1586             <source>GEOM_SUPPRESS_RESULT_OUTSIDE</source>
1587             <translation>Outside</translation>
1588         </message>
1589         <message>
1590             <source>GEOM_SUPRESSFACE</source>
1591             <translation>Supress Face</translation>
1592         </message>
1593         <message>
1594             <source>GEOM_SUPRESSFACE_SELECT</source>
1595             <translation>Select Faces To Suppress</translation>
1596         </message>
1597         <message>
1598             <source>GEOM_SUPRESSFACE_TITLE</source>
1599             <translation>Suppress Faces In An Object</translation>
1600         </message>
1601         <message>
1602             <source>GEOM_SURFACE_CONTINUTY</source>
1603             <translation>Surface continuity</translation>
1604         </message>
1605         <message>
1606             <source>GEOM_SURFACE_MODE</source>
1607             <translation>Surface mode</translation>
1608         </message>
1609         <message>
1610             <source>GEOM_SURFCONE</source>
1611             <translation>Conical Face</translation>
1612         </message>
1613         <message>
1614             <source>GEOM_SURFCYLINDER</source>
1615             <translation>Cylindrical Face</translation>
1616         </message>
1617         <message>
1618             <source>GEOM_SURFSPHERE</source>
1619             <translation>Spherical Face</translation>
1620         </message>
1621         <message>
1622             <source>GEOM_SURFTORUS</source>
1623             <translation>Toroidal Face</translation>
1624         </message>
1625         <message>
1626             <source>GEOM_SameParameter</source>
1627             <translation>SameParameter</translation>
1628         </message>
1629         <message>
1630             <source>GEOM_SplitAngle</source>
1631             <translation>SplitAngle</translation>
1632         </message>
1633         <message>
1634             <source>GEOM_SplitClosedFaces</source>
1635             <translation>SplitClosedFaces</translation>
1636         </message>
1637         <message>
1638             <source>GEOM_SplitContinuity</source>
1639             <translation>SplitContinuity</translation>
1640         </message>
1641         <message>
1642             <source>GEOM_TOLERANCE</source>
1643             <translation>Tolerance</translation>
1644         </message>
1645         <message>
1646             <source>GEOM_TOLERANCE_CONSTR</source>
1647             <translation>Object And Its Tolerances</translation>
1648         </message>
1649         <message>
1650             <source>GEOM_TOLERANCE_EDGE</source>
1651             <translation>Edge :</translation>
1652         </message>
1653         <message>
1654             <source>GEOM_TOLERANCE_FACE</source>
1655             <translation>Face :</translation>
1656         </message>
1657         <message>
1658             <source>GEOM_TOLERANCE_TITLE</source>
1659             <translation>Maximum Tolerance</translation>
1660         </message>
1661         <message>
1662             <source>GEOM_TOLERANCE_VERTEX</source>
1663             <translation>Vertex :</translation>
1664         </message>
1665         <message>
1666             <source>GEOM_TOOL_OBJECT</source>
1667             <translation>Tool Object</translation>
1668         </message>
1669         <message>
1670             <source>GEOM_TORUS</source>
1671             <translation>Torus</translation>
1672         </message>
1673         <message>
1674             <source>GEOM_TORUS_TITLE</source>
1675             <translation>Torus Construction</translation>
1676         </message>
1677         <message>
1678             <source>GEOM_TRANSLATION</source>
1679             <translation>Translation</translation>
1680         </message>
1681         <message>
1682             <source>GEOM_TRANSLATION_COOR</source>
1683             <translation>Translation With Coordinates</translation>
1684         </message>
1685         <message>
1686             <source>GEOM_TRANSLATION_TITLE</source>
1687             <translation>Translation Of An Object</translation>
1688         </message>
1689         <message>
1690             <source>GEOM_TRANSPARENCY_OPAQUE</source>
1691             <translation>Opaque</translation>
1692         </message>
1693         <message>
1694             <source>GEOM_TRANSPARENCY_TITLE</source>
1695             <translation>Transparency</translation>
1696         </message>
1697         <message>
1698             <source>GEOM_TRANSPARENCY_TRANSPARENT</source>
1699             <translation>Transparent</translation>
1700         </message>
1701         <message>
1702             <source>GEOM_TRIHEDRON</source>
1703             <translation>Trihedron</translation>
1704         </message>
1705         <message>
1706             <source>GEOM_ToBezier</source>
1707             <translation>ToBezier</translation>
1708         </message>
1709         <message>
1710             <source>GEOM_VALUE</source>
1711             <translation>Value</translation>
1712         </message>
1713         <message>
1714             <source>GEOM_VECTOR</source>
1715             <translation>Vector</translation>
1716         </message>
1717         <message>
1718             <source>GEOM_VECTOR_LENGTH</source>
1719             <translation>Vector Length :</translation>
1720         </message>
1721         <message>
1722             <source>GEOM_VECTOR_TITLE</source>
1723             <translation>Vector Construction</translation>
1724         </message>
1725         <message>
1726             <source>GEOM_VECTOR_U</source>
1727             <translation>Vector U</translation>
1728         </message>
1729         <message>
1730             <source>GEOM_VECTOR_V</source>
1731             <translation>Vector V</translation>
1732         </message>
1733         <message>
1734             <source>GEOM_VERTEX</source>
1735             <translation>Vertex</translation>
1736         </message>
1737         <message>
1738             <source>GEOM_WATER_DENSITY</source>
1739             <translation>Water Density :</translation>
1740         </message>
1741         <message>
1742             <source>GEOM_WEIGHT</source>
1743             <translation>Weight :</translation>
1744         </message>
1745         <message>
1746             <source>GEOM_WHATIS</source>
1747             <translation>Whatis</translation>
1748         </message>
1749         <message>
1750             <source>GEOM_WHATIS_OBJECT</source>
1751             <translation>Object And Its Topological Informations</translation>
1752         </message>
1753         <message>
1754             <source>GEOM_WHATIS_TITLE</source>
1755             <translation>Whatis Informations</translation>
1756         </message>
1757         <message>
1758             <source>GEOM_WIRE</source>
1759             <translation>Wire</translation>
1760         </message>
1761         <message>
1762             <source>GEOM_WIRES</source>
1763             <translation>Wire(s)</translation>
1764         </message>
1765         <message>
1766             <source>GEOM_WIRES_TO_REMOVE</source>
1767             <translation>Wires to remove</translation>
1768         </message>
1769         <message>
1770             <source>GEOM_WIREZ</source>
1771             <translation>Wires</translation>
1772         </message>
1773         <message>
1774             <source>GEOM_WIRE_CONNECT</source>
1775             <translation>Wire creation from wires/edges connected</translation>
1776         </message>
1777         <message>
1778             <source>GEOM_WIRE_TITLE</source>
1779             <translation>Create A Wire</translation>
1780         </message>
1781         <message>
1782             <source>GEOM_WPLANE</source>
1783             <translation>Working Plane</translation>
1784         </message>
1785         <message>
1786             <source>GEOM_WPLANE_FACE</source>
1787             <translation>Plane, Planar Face or LCS</translation>
1788         </message>
1789         <message>
1790             <source>GEOM_WPLANE_ORIGIN</source>
1791             <translation>Select a plane</translation>
1792         </message>
1793         <message>
1794             <source>GEOM_WPLANE_OXY</source>
1795             <translation>OXY</translation>
1796         </message>
1797         <message>
1798             <source>GEOM_WPLANE_OYZ</source>
1799             <translation>OYZ</translation>
1800         </message>
1801         <message>
1802             <source>GEOM_WPLANE_OZX</source>
1803             <translation>OZX</translation>
1804         </message>
1805         <message>
1806             <source>GEOM_WPLANE_TITLE</source>
1807             <translation>Working Plane Selection</translation>
1808         </message>
1809         <message>
1810             <source>GEOM_WPLANE_VECTOR</source>
1811             <translation>Select 2 vectors</translation>
1812         </message>
1813         <message>
1814             <source>GEOM_WPLANE_VX</source>
1815             <translation>Vector X</translation>
1816         </message>
1817         <message>
1818             <source>GEOM_WPLANE_VZ</source>
1819             <translation>Vector Z</translation>
1820         </message>
1821         <message>
1822             <source>GEOM_WRN_RADIUS_NULL</source>
1823             <translation>Radius is null</translation>
1824         </message>
1825         <message>
1826             <source>GEOM_WRN_WARNING</source>
1827             <translation>Warning</translation>
1828         </message>
1829         <message>
1830             <source>GEOM_X</source>
1831             <translation>X :</translation>
1832         </message>
1833         <message>
1834             <source>GEOM_Y</source>
1835             <translation>Y :</translation>
1836         </message>
1837         <message>
1838             <source>GEOM_Z</source>
1839             <translation>Z :</translation>
1840         </message>
1841         <message>
1842             <source>GLUE_NEW_OBJ_NAME</source>
1843             <translation>Glue</translation>
1844         </message>
1845         <message>
1846             <source>MEN_ALL_SEL_ONLY</source>
1847             <translation>Select All</translation>
1848         </message>
1849         <message>
1850             <source>MEN_ARC</source>
1851             <translation>Arc</translation>
1852         </message>
1853         <message>
1854             <source>MEN_ARCHIMEDE</source>
1855             <translation>Archimede</translation>
1856         </message>
1857         <message>
1858             <source>MEN_BASIC</source>
1859             <translation>Basic</translation>
1860         </message>
1861         <message>
1862             <source>MEN_BASIC_PROPS</source>
1863             <translation>Basic properties</translation>
1864         </message>
1865         <message>
1866             <source>MEN_BLOCKS</source>
1867             <translation>Blocks</translation>
1868         </message>
1869         <message>
1870             <source>MEN_BND_BOX</source>
1871             <translation>Bounding box</translation>
1872         </message>
1873         <message>
1874             <source>MEN_BOOLEAN</source>
1875             <translation>Boolean</translation>
1876         </message>
1877         <message>
1878             <source>MEN_BOX</source>
1879             <translation>Box</translation>
1880         </message>
1881         <message>
1882             <source>MEN_BUILD</source>
1883             <translation>Build</translation>
1884         </message>
1885         <message>
1886             <source>MEN_CHAMFER</source>
1887             <translation>Chamfer</translation>
1888         </message>
1889         <message>
1890             <source>MEN_CHANGE_ORIENTATION</source>
1891             <translation>Change orientation</translation>
1892         </message>
1893         <message>
1894             <source>MEN_CHECK</source>
1895             <translation>Check</translation>
1896         </message>
1897         <message>
1898             <source>MEN_CHECK_COMPOUND</source>
1899             <translation>Check compound of blocks</translation>
1900         </message>
1901         <message>
1902             <source>MEN_CHECK_FREE_BNDS</source>
1903             <translation>Check free boundaries</translation>
1904         </message>
1905         <message>
1906             <source>MEN_CHECK_FREE_FACES</source>
1907             <translation>Check free faces</translation>
1908         </message>
1909         <message>
1910             <source>MEN_CHECK_GEOMETRY</source>
1911             <translation>Check Geometry</translation>
1912         </message>
1913         <message>
1914             <source>MEN_CIRCLE</source>
1915             <translation>Circle</translation>
1916         </message>
1917         <message>
1918             <source>MEN_CLIPPING</source>
1919             <translation>Clipping range</translation>
1920         </message>
1921         <message>
1922             <source>MEN_CLOSE_CONTOUR</source>
1923             <translation>Close contour</translation>
1924         </message>
1925         <message>
1926             <source>MEN_COMMON</source>
1927             <translation>Common</translation>
1928         </message>
1929         <message>
1930             <source>MEN_COMPOUND</source>
1931             <translation>Compound</translation>
1932         </message>
1933         <message>
1934             <source>MEN_COMPOUND_SEL_ONLY</source>
1935             <translation>Compound</translation>
1936         </message>
1937         <message>
1938             <source>MEN_CONE</source>
1939             <translation>Cone</translation>
1940         </message>
1941         <message>
1942             <source>MEN_CURVE</source>
1943             <translation>Curve</translation>
1944         </message>
1945         <message>
1946             <source>MEN_CUT</source>
1947             <translation>Cut</translation>
1948         </message>
1949         <message>
1950             <source>MEN_CYLINDER</source>
1951             <translation>Cylinder</translation>
1952         </message>
1953         <message>
1954             <source>MEN_DELETE</source>
1955             <translation>Delete</translation>
1956         </message>
1957         <message>
1958             <source>MEN_DIMENSIONS</source>
1959             <translation>Dimensions</translation>
1960         </message>
1961         <message>
1962             <source>MEN_DISPLAY</source>
1963             <translation>Show</translation>
1964         </message>
1965         <message>
1966             <source>MEN_DISPLAY_ALL</source>
1967             <translation>Show all</translation>
1968         </message>
1969         <message>
1970             <source>MEN_DISPLAY_MODE</source>
1971             <translation>Display mode</translation>
1972         </message>
1973         <message>
1974             <source>MEN_DISPLAY_ONLY</source>
1975             <translation>Show only</translation>
1976         </message>
1977         <message>
1978             <source>MEN_EDGE</source>
1979             <translation>Edge</translation>
1980         </message>
1981         <message>
1982             <source>MEN_EDGE_SEL_ONLY</source>
1983             <translation>Edge</translation>
1984         </message>
1985         <message>
1986             <source>MEN_EDIT</source>
1987             <translation>Edit</translation>
1988         </message>
1989         <message>
1990             <source>MEN_ELLIPSE</source>
1991             <translation>Ellipse</translation>
1992         </message>
1993         <message>
1994             <source>MEN_ERASE</source>
1995             <translation>Hide</translation>
1996         </message>
1997         <message>
1998             <source>MEN_ERASE_ALL</source>
1999             <translation>Hide all</translation>
2000         </message>
2001         <message>
2002             <source>MEN_EXPLODE</source>
2003             <translation>Explode</translation>
2004         </message>
2005         <message>
2006             <source>MEN_EXPLODE_BLOCKS</source>
2007             <translation>Explode on Blocks</translation>
2008         </message>
2009         <message>
2010             <source>MEN_EXPORT</source>
2011             <translation>Export...</translation>
2012         </message>
2013         <message>
2014             <source>MEN_EXTRUSION</source>
2015             <translation>Extrusion</translation>
2016         </message>
2017         <message>
2018             <source>MEN_FACE</source>
2019             <translation>Face</translation>
2020         </message>
2021         <message>
2022             <source>MEN_FACE_SEL_ONLY</source>
2023             <translation>Face</translation>
2024         </message>
2025         <message>
2026             <source>MEN_FILE</source>
2027             <translation>File</translation>
2028         </message>
2029         <message>
2030             <source>MEN_FILLET</source>
2031             <translation>Fillet</translation>
2032         </message>
2033         <message>
2034             <source>MEN_FILLING</source>
2035             <translation>Filling</translation>
2036         </message>
2037         <message>
2038             <source>MEN_FUSE</source>
2039             <translation>Fuse</translation>
2040         </message>
2041         <message>
2042             <source>MEN_GENERATION</source>
2043             <translation>Generation</translation>
2044         </message>
2045         <message>
2046             <source>MEN_GLUE_FACES</source>
2047             <translation>Glue faces</translation>
2048         </message>
2049         <message>
2050             <source>MEN_GROUP</source>
2051             <translation>Group</translation>
2052         </message>
2053         <message>
2054             <source>MEN_GROUP_CREATE</source>
2055             <translation>Create</translation>
2056         </message>
2057         <message>
2058             <source>MEN_GROUP_EDIT</source>
2059             <translation>Edit</translation>
2060         </message>
2061         <message>
2062             <source>MEN_HEX_SOLID</source>
2063             <translation>Hexahedral Solid</translation>
2064         </message>
2065         <message>
2066             <source>MEN_IMPORT</source>
2067             <translation>Import...</translation>
2068         </message>
2069         <message>
2070             <source>MEN_INERTIA</source>
2071             <translation>Inertia</translation>
2072         </message>
2073         <message>
2074             <source>MEN_ISOS</source>
2075             <translation>Isos</translation>
2076         </message>
2077         <message>
2078             <source>MEN_LINE</source>
2079             <translation>Line</translation>
2080         </message>
2081         <message>
2082             <source>MEN_LOCAL_CS</source>
2083             <translation>Local coordinate system</translation>
2084         </message>
2085         <message>
2086             <source>MEN_MASS_CENTER</source>
2087             <translation>Center of mass</translation>
2088         </message>
2089         <message>
2090             <source>MEN_MEASURES</source>
2091             <translation>Measures</translation>
2092         </message>
2093         <message>
2094             <source>MEN_MIN_DIST</source>
2095             <translation>Min distance</translation>
2096         </message>
2097         <message>
2098             <source>MEN_MIRROR</source>
2099             <translation>Mirror image</translation>
2100         </message>
2101         <message>
2102             <source>MEN_MODIFY_LOCATION</source>
2103             <translation>Modify the Location</translation>
2104         </message>
2105         <message>
2106             <source>MEN_MUL_ROTATION</source>
2107             <translation>Multi-Rotation</translation>
2108         </message>
2109         <message>
2110             <source>MEN_MUL_TRANSFORM</source>
2111             <translation>Multi-transformation</translation>
2112         </message>
2113         <message>
2114             <source>MEN_MUL_TRANSLATION</source>
2115             <translation>Multi-Translation</translation>
2116         </message>
2117         <message>
2118             <source>MEN_NEW_ENTITY</source>
2119             <translation>New Entity</translation>
2120         </message>
2121         <message>
2122             <source>MEN_OFFSET</source>
2123             <translation>Offset surface</translation>
2124         </message>
2125         <message>
2126             <source>MEN_OPERATIONS</source>
2127             <translation>Operations</translation>
2128         </message>
2129         <message>
2130             <source>MEN_PARTITION</source>
2131             <translation>Partition</translation>
2132         </message>
2133         <message>
2134             <source>MEN_PIPE</source>
2135             <translation>Extrusion along a path</translation>
2136         </message>
2137         <message>
2138             <source>MEN_PLANE</source>
2139             <translation>Plane</translation>
2140         </message>
2141         <message>
2142             <source>MEN_POINT</source>
2143             <translation>Point</translation>
2144         </message>
2145         <message>
2146             <source>MEN_POINT_COORDS</source>
2147             <translation>Point coordinates</translation>
2148         </message>
2149         <message>
2150             <source>MEN_POINT_ON_EDGE</source>
2151             <translation>Add point on edge</translation>
2152         </message>
2153         <message>
2154             <source>MEN_POP_COLOR</source>
2155             <translation>Color</translation>
2156         </message>
2157         <message>
2158             <source>MEN_POP_CREATE_GROUP</source>
2159             <translation>Create Group</translation>
2160         </message>
2161         <message>
2162             <source>MEN_POP_ISOS</source>
2163             <translation>Isos</translation>
2164         </message>
2165         <message>
2166             <source>MEN_POP_RENAME</source>
2167             <translation>Rename</translation>
2168         </message>
2169         <message>
2170             <source>MEN_POP_SHADING</source>
2171             <translation>Shading</translation>
2172         </message>
2173         <message>
2174             <source>MEN_POP_TRANSPARENCY</source>
2175             <translation>Transparency</translation>
2176         </message>
2177         <message>
2178             <source>MEN_POP_WIREFRAME</source>
2179             <translation>Wireframe</translation>
2180         </message>
2181         <message>
2182             <source>MEN_PREFERENCES</source>
2183             <translation>Preferences</translation>
2184         </message>
2185         <message>
2186             <source>MEN_PREFERENCES_GEOM</source>
2187             <translation>Geometry</translation>
2188         </message>
2189         <message>
2190             <source>MEN_PRIMITIVES</source>
2191             <translation>Primitives</translation>
2192         </message>
2193         <message>
2194             <source>MEN_PROPAGATE</source>
2195             <translation>Propagate</translation>
2196         </message>
2197         <message>
2198             <source>MEN_Q_FACE</source>
2199             <translation>Quadrangle Face</translation>
2200         </message>
2201         <message>
2202             <source>MEN_REPAIR</source>
2203             <translation>Repair</translation>
2204         </message>
2205         <message>
2206             <source>MEN_REVOLUTION</source>
2207             <translation>Revolution</translation>
2208         </message>
2209         <message>
2210             <source>MEN_ROTATION</source>
2211             <translation>Rotation</translation>
2212         </message>
2213         <message>
2214             <source>MEN_SCALE</source>
2215             <translation>Scale transform</translation>
2216         </message>
2217         <message>
2218             <source>MEN_SECTION</source>
2219             <translation>Section</translation>
2220         </message>
2221         <message>
2222             <source>MEN_SELECT_ONLY</source>
2223             <translation>Select Only</translation>
2224         </message>
2225         <message>
2226             <source>MEN_SEWING</source>
2227             <translation>Sewing</translation>
2228         </message>
2229         <message>
2230             <source>MEN_SHADING</source>
2231             <translation>Shading</translation>
2232         </message>
2233         <message>
2234             <source>MEN_SHADING_COLOR</source>
2235             <translation>Shading color</translation>
2236         </message>
2237         <message>
2238             <source>MEN_SHAPE_PROCESS</source>
2239             <translation>Shape processing</translation>
2240         </message>
2241         <message>
2242             <source>MEN_SHELL</source>
2243             <translation>Shell</translation>
2244         </message>
2245         <message>
2246             <source>MEN_SHELL_SEL_ONLY</source>
2247             <translation>Shell</translation>
2248         </message>
2249         <message>
2250             <source>MEN_SKETCH</source>
2251             <translation>Sketch</translation>
2252         </message>
2253         <message>
2254             <source>MEN_SOLID</source>
2255             <translation>Solid</translation>
2256         </message>
2257         <message>
2258             <source>MEN_SOLID_SEL_ONLY</source>
2259             <translation>Solid</translation>
2260         </message>
2261         <message>
2262             <source>MEN_SPHERE</source>
2263             <translation>Sphere</translation>
2264         </message>
2265         <message>
2266             <source>MEN_STEP_VALUE</source>
2267             <translation>Step value</translation>
2268         </message>
2269         <message>
2270             <source>MEN_SUPPERSS_HOLES</source>
2271             <translation>Suppress holes</translation>
2272         </message>
2273         <message>
2274             <source>MEN_SUPPRESS_FACES</source>
2275             <translation>Suppress faces</translation>
2276         </message>
2277         <message>
2278             <source>MEN_SUPPRESS_INT_WIRES</source>
2279             <translation>Suppress internal wires</translation>
2280         </message>
2281         <message>
2282             <source>MEN_TOLERANCE</source>
2283             <translation>Compute tolerance</translation>
2284         </message>
2285         <message>
2286             <source>MEN_TOOLS</source>
2287             <translation>Tools</translation>
2288         </message>
2289         <message>
2290             <source>MEN_TORUS</source>
2291             <translation>Torus</translation>
2292         </message>
2293         <message>
2294             <source>MEN_TRANSFORMATION</source>
2295             <translation>Transformation</translation>
2296         </message>
2297         <message>
2298             <source>MEN_TRANSLATION</source>
2299             <translation>Translation</translation>
2300         </message>
2301         <message>
2302             <source>MEN_VECTOR</source>
2303             <translation>Vector</translation>
2304         </message>
2305         <message>
2306             <source>MEN_VERTEX_SEL_ONLY</source>
2307             <translation>Vertex</translation>
2308         </message>
2309         <message>
2310             <source>MEN_VIEW</source>
2311             <translation>View</translation>
2312         </message>
2313         <message>
2314             <source>MEN_WHAT_IS</source>
2315             <translation>What is</translation>
2316         </message>
2317         <message>
2318             <source>MEN_WIRE</source>
2319             <translation>Wire</translation>
2320         </message>
2321         <message>
2322             <source>MEN_WIREFRAME</source>
2323             <translation>Wireframe</translation>
2324         </message>
2325         <message>
2326             <source>MEN_WIRE_SEL_ONLY</source>
2327             <translation>Wire</translation>
2328         </message>
2329         <message>
2330             <source>MEN_WORK_PLANE</source>
2331             <translation>Working plane</translation>
2332         </message>
2333         <message>
2334             <source>NAME_LBL</source>
2335             <translation>Name: </translation>
2336         </message>
2337         <message>
2338             <source>NON_GEOM_OBJECTS_SELECTED</source>
2339             <translation>There are objects selected which do not belong to %1 component.</translation>
2340         </message>
2341         <message>
2342             <source>PREF_DISPLAY_MODE</source>
2343             <translation>Default display mode</translation>
2344         </message>
2345         <message>
2346             <source>PREF_FREE_BOUND_COLOR</source>
2347             <translation>Color of free boundaries</translation>
2348         </message>
2349         <message>
2350             <source>PREF_GROUP_GENERAL</source>
2351             <translation>General</translation>
2352         </message>
2353         <message>
2354             <source>PREF_GROUP_OCCVIEWER</source>
2355             <translation>OCC Viewer 3d</translation>
2356         </message>
2357         <message>
2358             <source>PREF_GROUP_VERTEX</source>
2359             <translation>Marker of Points</translation>
2360         </message>
2361         <message>
2362             <source>PREF_ISOS_COLOR</source>
2363             <translation>Color of isolines</translation>
2364         </message>
2365         <message>
2366             <source>PREF_LINE_COLOR</source>
2367             <translation>Color of edges, vectors, wires</translation>
2368         </message>
2369         <message>
2370             <source>PREF_MARKER_SCALE</source>
2371             <translation>Size</translation>
2372         </message>
2373         <message>
2374             <source>PREF_POINT_COLOR</source>
2375             <translation>Color of points</translation>
2376         </message>
2377         <message>
2378             <source>PREF_SHADING_COLOR</source>
2379             <translation>Default shading color</translation>
2380         </message>
2381         <message>
2382             <source>PREF_STEP_VALUE</source>
2383             <translation>Step value for spin boxes</translation>
2384         </message>
2385         <message>
2386             <source>PREF_TAB_SETTINGS</source>
2387             <translation>Settings</translation>
2388         </message>
2389         <message>
2390             <source>PREF_TYPE_OF_MARKER</source>
2391             <translation>Type</translation>
2392         </message>
2393         <message>
2394             <source>PREF_WIREFRAME_COLOR</source>
2395             <translation>Default wireframe color</translation>
2396         </message>
2397         <message>
2398             <source>PROCESS_SHAPE_NEW_OBJ_NAME</source>
2399             <translation>ProcessShape</translation>
2400         </message>
2401         <message>
2402             <source>REMOVE_HOLES_NEW_OBJ_NAME</source>
2403             <translation>SupressHoles</translation>
2404         </message>
2405         <message>
2406             <source>REMOVE_INT_WIRES_NEW_OBJ_NAME</source>
2407             <translation>RemoveIntWires</translation>
2408         </message>
2409         <message>
2410             <source>SEWING_NEW_OBJ_NAME</source>
2411             <translation>Sewing</translation>
2412         </message>
2413         <message>
2414             <source>STB_ALL_SEL_ONLY</source>
2415             <translation>Select all Objects</translation>
2416         </message>
2417         <message>
2418             <source>STB_ARC</source>
2419             <translation>Create an arc</translation>
2420         </message>
2421         <message>
2422             <source>STB_ARCHIMEDE</source>
2423             <translation>Archimede</translation>
2424         </message>
2425         <message>
2426             <source>STB_BASIC_PROPS</source>
2427             <translation>Basic properties</translation>
2428         </message>
2429         <message>
2430             <source>STB_BND_BOX</source>
2431             <translation>Compute bounding box</translation>
2432         </message>
2433         <message>
2434             <source>STB_BOX</source>
2435             <translation>Create a box</translation>
2436         </message>
2437         <message>
2438             <source>STB_CHAMFER</source>
2439             <translation>Chamfer</translation>
2440         </message>
2441         <message>
2442             <source>STB_CHANGE_ORIENTATION</source>
2443             <translation>Change orientation</translation>
2444         </message>
2445         <message>
2446             <source>STB_CHECK</source>
2447             <translation>Check</translation>
2448         </message>
2449         <message>
2450             <source>STB_CHECK_COMPOUND</source>
2451             <translation>Check compound of blocks</translation>
2452         </message>
2453         <message>
2454             <source>STB_CHECK_FREE_BNDS</source>
2455             <translation>Check free boundaries</translation>
2456         </message>
2457         <message>
2458             <source>STB_CHECK_FREE_FACES</source>
2459             <translation>Check free faces</translation>
2460         </message>
2461         <message>
2462             <source>STB_CHECK_GEOMETRY</source>
2463             <translation>Check Geometry</translation>
2464         </message>
2465         <message>
2466             <source>STB_CIRCLE</source>
2467             <translation>Create a circle</translation>
2468         </message>
2469         <message>
2470             <source>STB_CLIPPING</source>
2471             <translation>Clipping range</translation>
2472         </message>
2473         <message>
2474             <source>STB_CLOSE_CONTOUR</source>
2475             <translation>Perform close contour</translation>
2476         </message>
2477         <message>
2478             <source>STB_COMMON</source>
2479             <translation>Common</translation>
2480         </message>
2481         <message>
2482             <source>STB_COMPOUND</source>
2483             <translation>Build a compound</translation>
2484         </message>
2485         <message>
2486             <source>STB_COMPOUND_SEL_ONLY</source>
2487             <translation>Select only a Compounds</translation>
2488         </message>
2489         <message>
2490             <source>STB_CONE</source>
2491             <translation>Create a cone</translation>
2492         </message>
2493         <message>
2494             <source>STB_CURVE</source>
2495             <translation>Create a curve</translation>
2496         </message>
2497         <message>
2498             <source>STB_CUT</source>
2499             <translation>Cut</translation>
2500         </message>
2501         <message>
2502             <source>STB_CYLINDER</source>
2503             <translation>Create a cylinder</translation>
2504         </message>
2505         <message>
2506             <source>STB_DELETE</source>
2507             <translation>Delete object</translation>
2508         </message>
2509         <message>
2510             <source>STB_DISPLAY</source>
2511             <translation>Show object(s)</translation>
2512         </message>
2513         <message>
2514             <source>STB_DISPLAY_ALL</source>
2515             <translation>Show all</translation>
2516         </message>
2517         <message>
2518             <source>STB_DISPLAY_ONLY</source>
2519             <translation>Show only</translation>
2520         </message>
2521         <message>
2522             <source>STB_EDGE</source>
2523             <translation>Build an edge</translation>
2524         </message>
2525         <message>
2526             <source>STB_EDGE_SEL_ONLY</source>
2527             <translation>Select only a Edges</translation>
2528         </message>
2529         <message>
2530             <source>STB_ELLIPSE</source>
2531             <translation>Create an ellipse</translation>
2532         </message>
2533         <message>
2534             <source>STB_ERASE</source>
2535             <translation>Hide object(s)</translation>
2536         </message>
2537         <message>
2538             <source>STB_ERASE_ALL</source>
2539             <translation>Hide all</translation>
2540         </message>
2541         <message>
2542             <source>STB_EXPLODE</source>
2543             <translation>Explode</translation>
2544         </message>
2545         <message>
2546             <source>STB_EXPLODE_BLOCKS</source>
2547             <translation>Explode on Blocks</translation>
2548         </message>
2549         <message>
2550             <source>STB_EXPORT</source>
2551             <translation>Export geometry to BREP file</translation>
2552         </message>
2553         <message>
2554             <source>STB_EXTRUSION</source>
2555             <translation>Create an extrusion</translation>
2556         </message>
2557         <message>
2558             <source>STB_FACE</source>
2559             <translation>Build a face from wires and/or edges</translation>
2560         </message>
2561         <message>
2562             <source>STB_FACE_SEL_ONLY</source>
2563             <translation>Select only a Faces</translation>
2564         </message>
2565         <message>
2566             <source>STB_FILLET</source>
2567             <translation>Fillet</translation>
2568         </message>
2569         <message>
2570             <source>STB_FILLING</source>
2571             <translation>Create a filling</translation>
2572         </message>
2573         <message>
2574             <source>STB_FUSE</source>
2575             <translation>Fuse</translation>
2576         </message>
2577         <message>
2578             <source>STB_GLUE_FACES</source>
2579             <translation>Perform glue faces</translation>
2580         </message>
2581         <message>
2582             <source>STB_GROUP_CREATE</source>
2583             <translation>Create a group</translation>
2584         </message>
2585         <message>
2586             <source>STB_GROUP_EDIT</source>
2587             <translation>Edit a group</translation>
2588         </message>
2589         <message>
2590             <source>STB_HEX_SOLID</source>
2591             <translation>Hexahedral Solid</translation>
2592         </message>
2593         <message>
2594             <source>STB_IMPORT</source>
2595             <translation>Import geometry from BREP file</translation>
2596         </message>
2597         <message>
2598             <source>STB_INERTIA</source>
2599             <translation>Compute intertia</translation>
2600         </message>
2601         <message>
2602             <source>STB_ISOS</source>
2603             <translation>Set number of isolines</translation>
2604         </message>
2605         <message>
2606             <source>STB_LINE</source>
2607             <translation>Create a line</translation>
2608         </message>
2609         <message>
2610             <source>STB_LOCAL_CS</source>
2611             <translation>Create a local coordinate system</translation>
2612         </message>
2613         <message>
2614             <source>STB_MASS_CENTER</source>
2615             <translation>Compute center of mass</translation>
2616         </message>
2617         <message>
2618             <source>STB_MIN_DIST</source>
2619             <translation>Compute minimum distance</translation>
2620         </message>
2621         <message>
2622             <source>STB_MIRROR</source>
2623             <translation>Mirror image</translation>
2624         </message>
2625         <message>
2626             <source>STB_MODIFY_LOCATION</source>
2627             <translation>Modify the Location</translation>
2628         </message>
2629         <message>
2630             <source>STB_MUL_ROTATION</source>
2631             <translation>Multi-Rotation</translation>
2632         </message>
2633         <message>
2634             <source>STB_MUL_TRANSFORM</source>
2635             <translation>Multi-transformation</translation>
2636         </message>
2637         <message>
2638             <source>STB_MUL_TRANSLATION</source>
2639             <translation>Multi-Translation</translation>
2640         </message>
2641         <message>
2642             <source>STB_OFFSET</source>
2643             <translation>Offset surface</translation>
2644         </message>
2645         <message>
2646             <source>STB_PARTITION</source>
2647             <translation>Partition</translation>
2648         </message>
2649         <message>
2650             <source>STB_PIPE</source>
2651             <translation>Create a shape by Extrusion along a path</translation>
2652         </message>
2653         <message>
2654             <source>STB_PLANE</source>
2655             <translation>Create a plane</translation>
2656         </message>
2657         <message>
2658             <source>STB_POINT</source>
2659             <translation>Create a point</translation>
2660         </message>
2661         <message>
2662             <source>STB_POINT_COORDS</source>
2663             <translation>Point coordinates</translation>
2664         </message>
2665         <message>
2666             <source>STB_POINT_ON_EDGE</source>
2667             <translation>Add point on edge</translation>
2668         </message>
2669         <message>
2670             <source>STB_POP_COLOR</source>
2671             <translation>Color</translation>
2672         </message>
2673         <message>
2674             <source>STB_POP_CREATE_GROUP</source>
2675             <translation>Create Group</translation>
2676         </message>
2677         <message>
2678             <source>STB_POP_ISOS</source>
2679             <translation>Isolines</translation>
2680         </message>
2681         <message>
2682             <source>STB_POP_RENAME</source>
2683             <translation>Rename</translation>
2684         </message>
2685         <message>
2686             <source>STB_POP_SHADING</source>
2687             <translation>Shading</translation>
2688         </message>
2689         <message>
2690             <source>STB_POP_TRANSPARENCY</source>
2691             <translation>Transparency</translation>
2692         </message>
2693         <message>
2694             <source>STB_POP_WIREFRAME</source>
2695             <translation>Wireframe</translation>
2696         </message>
2697         <message>
2698             <source>STB_PROPAGATE</source>
2699             <translation>Propagate</translation>
2700         </message>
2701         <message>
2702             <source>STB_Q_FACE</source>
2703             <translation>Quadrangle Face</translation>
2704         </message>
2705         <message>
2706             <source>STB_REVOLUTION</source>
2707             <translation>Create a revolution</translation>
2708         </message>
2709         <message>
2710             <source>STB_ROTATION</source>
2711             <translation>Rotation</translation>
2712         </message>
2713         <message>
2714             <source>STB_SCALE</source>
2715             <translation>Scale transform</translation>
2716         </message>
2717         <message>
2718             <source>STB_SECTION</source>
2719             <translation>Section</translation>
2720         </message>
2721         <message>
2722             <source>STB_SEWING</source>
2723             <translation>Perform sewing</translation>
2724         </message>
2725         <message>
2726             <source>STB_SHADING</source>
2727             <translation>Shading</translation>
2728         </message>
2729         <message>
2730             <source>STB_SHADING_COLOR</source>
2731             <translation>Set shading color</translation>
2732         </message>
2733         <message>
2734             <source>STB_SHAPE_PROCESS</source>
2735             <translation>Perform shape processing </translation>
2736         </message>
2737         <message>
2738             <source>STB_SHELL</source>
2739             <translation>Build a shell</translation>
2740         </message>
2741         <message>
2742             <source>STB_SHELL_SEL_ONLY</source>
2743             <translation>Select only a Shells</translation>
2744         </message>
2745         <message>
2746             <source>STB_SKETCH</source>
2747             <translation>Sketch</translation>
2748         </message>
2749         <message>
2750             <source>STB_SOLID</source>
2751             <translation>Build a solid</translation>
2752         </message>
2753         <message>
2754             <source>STB_SOLID_SEL_ONLY</source>
2755             <translation>Select only a Solids</translation>
2756         </message>
2757         <message>
2758             <source>STB_SPHERE</source>
2759             <translation>Create a sphere</translation>
2760         </message>
2761         <message>
2762             <source>STB_STEP_VALUE</source>
2763             <translation>Set step value</translation>
2764         </message>
2765         <message>
2766             <source>STB_SUPPERSS_HOLES</source>
2767             <translation>Perform suppress holes</translation>
2768         </message>
2769         <message>
2770             <source>STB_SUPPRESS_FACES</source>
2771             <translation>Perform suppress faces</translation>
2772         </message>
2773         <message>
2774             <source>STB_SUPPRESS_INT_WIRES</source>
2775             <translation>Perform suppress internal wires</translation>
2776         </message>
2777         <message>
2778             <source>STB_TOLERANCE</source>
2779             <translation>Compute tolerance</translation>
2780         </message>
2781         <message>
2782             <source>STB_TORUS</source>
2783             <translation>Create a torus</translation>
2784         </message>
2785         <message>
2786             <source>STB_TRANSLATION</source>
2787             <translation>Translation</translation>
2788         </message>
2789         <message>
2790             <source>STB_VECTOR</source>
2791             <translation>Create a vector</translation>
2792         </message>
2793         <message>
2794             <source>STB_VERTEX_SEL_ONLY</source>
2795             <translation>Select only a Points</translation>
2796         </message>
2797         <message>
2798             <source>STB_WHAT_IS</source>
2799             <translation>What is</translation>
2800         </message>
2801         <message>
2802             <source>STB_WIRE</source>
2803             <translation>Build a wire</translation>
2804         </message>
2805         <message>
2806             <source>STB_WIRE_SEL_ONLY</source>
2807             <translation>Select only a Wires</translation>
2808         </message>
2809         <message>
2810             <source>STB_WORK_PLANE</source>
2811             <translation>Create a working plane</translation>
2812         </message>
2813         <message>
2814             <source>SUPPRESS_RESULT</source>
2815             <translation>Suppress Result</translation>
2816         </message>
2817         <message>
2818             <source>SUPRESS_FACE_NEW_OBJ_NAME</source>
2819             <translation>SupressFaces</translation>
2820         </message>
2821         <message>
2822             <source>ShHealOper_ErrorExecution_msg</source>
2823             <translation>Shape Healing algorithm failed</translation>
2824         </message>
2825         <message>
2826             <source>ShHealOper_InvalidParameters_msg</source>
2827             <translation>Incorrect parameters for Shape Healing algorithm</translation>
2828         </message>
2829         <message>
2830             <source>ShHealOper_NotError_msg</source>
2831             <translation>Shape Healing algorithm has done no modification of the original shape</translation>
2832         </message>
2833         <message>
2834             <source>TLT_RENAME</source>
2835             <translation>Rename</translation>
2836         </message>
2837         <message>
2838             <source>TOM_O</source>
2839             <translation>O</translation>
2840         </message>
2841         <message>
2842             <source>TOM_O_PLUS</source>
2843             <translation>+ in O</translation>
2844         </message>
2845         <message>
2846             <source>TOM_O_POINT</source>
2847             <translation>. in O</translation>
2848         </message>
2849         <message>
2850             <source>TOM_O_STAR</source>
2851             <translation>* in O</translation>
2852         </message>
2853         <message>
2854             <source>TOM_O_X</source>
2855             <translation>X in O</translation>
2856         </message>
2857         <message>
2858             <source>TOM_PLUS</source>
2859             <translation>+</translation>
2860         </message>
2861         <message>
2862             <source>TOM_POINT</source>
2863             <translation>.</translation>
2864         </message>
2865         <message>
2866             <source>TOM_STAR</source>
2867             <translation>*</translation>
2868         </message>
2869         <message>
2870             <source>TOM_X</source>
2871             <translation>X</translation>
2872         </message>
2873         <message>
2874             <source>TOOL_BASIC</source>
2875             <translation>Basic</translation>
2876         </message>
2877         <message>
2878             <source>TOOL_BOOLEAN</source>
2879             <translation>Boolean operations</translation>
2880         </message>
2881         <message>
2882             <source>TOOL_GENERATION</source>
2883             <translation>Generation</translation>
2884         </message>
2885         <message>
2886             <source>TOOL_PRIMITIVES</source>
2887             <translation>Primitives</translation>
2888         </message>
2889         <message>
2890             <source>TOOL_TRANSFORMATION</source>
2891             <translation>Transformation</translation>
2892         </message>
2893         <message>
2894             <source>TOP_ARC</source>
2895             <translation>Create an arc</translation>
2896         </message>
2897         <message>
2898             <source>TOP_ARCHIMEDE</source>
2899             <translation>Archimede</translation>
2900         </message>
2901         <message>
2902             <source>TOP_BASIC_PROPS</source>
2903             <translation>Basic properties</translation>
2904         </message>
2905         <message>
2906             <source>TOP_BND_BOX</source>
2907             <translation>Compute bounding box</translation>
2908         </message>
2909         <message>
2910             <source>TOP_BOX</source>
2911             <translation>Create a box</translation>
2912         </message>
2913         <message>
2914             <source>TOP_CHAMFER</source>
2915             <translation>Chamfer</translation>
2916         </message>
2917         <message>
2918             <source>TOP_CHANGE_ORIENTATION</source>
2919             <translation>Change orientation</translation>
2920         </message>
2921         <message>
2922             <source>TOP_CHECK</source>
2923             <translation>Check</translation>
2924         </message>
2925         <message>
2926             <source>TOP_CHECK_COMPOUND</source>
2927             <translation>Check compound of blocks</translation>
2928         </message>
2929         <message>
2930             <source>TOP_CHECK_FREE_BNDS</source>
2931             <translation>Check free boundaries</translation>
2932         </message>
2933         <message>
2934             <source>TOP_CHECK_FREE_FACES</source>
2935             <translation>Check free faces</translation>
2936         </message>
2937         <message>
2938             <source>TOP_CHECK_GEOMETRY</source>
2939             <translation>Check Geometry</translation>
2940         </message>
2941         <message>
2942             <source>TOP_CIRCLE</source>
2943             <translation>Create a circle</translation>
2944         </message>
2945         <message>
2946             <source>TOP_CLIPPING</source>
2947             <translation>Clipping range</translation>
2948         </message>
2949         <message>
2950             <source>TOP_CLOSE_CONTOUR</source>
2951             <translation>Perform close contour</translation>
2952         </message>
2953         <message>
2954             <source>TOP_COMMON</source>
2955             <translation>Common</translation>
2956         </message>
2957         <message>
2958             <source>TOP_COMPOUND</source>
2959             <translation>Build a compound</translation>
2960         </message>
2961         <message>
2962             <source>TOP_CONE</source>
2963             <translation>Create a cone</translation>
2964         </message>
2965         <message>
2966             <source>TOP_CURVE</source>
2967             <translation>Create a curve</translation>
2968         </message>
2969         <message>
2970             <source>TOP_CUT</source>
2971             <translation>Cut</translation>
2972         </message>
2973         <message>
2974             <source>TOP_CYLINDER</source>
2975             <translation>Create a cylinder</translation>
2976         </message>
2977         <message>
2978             <source>TOP_DELETE</source>
2979             <translation>Delete object</translation>
2980         </message>
2981         <message>
2982             <source>TOP_DISPLAY</source>
2983             <translation>Show</translation>
2984         </message>
2985         <message>
2986             <source>TOP_DISPLAY_ALL</source>
2987             <translation>Show all</translation>
2988         </message>
2989         <message>
2990             <source>TOP_DISPLAY_ONLY</source>
2991             <translation>Show only</translation>
2992         </message>
2993         <message>
2994             <source>TOP_EDGE</source>
2995             <translation>Build an edge</translation>
2996         </message>
2997         <message>
2998             <source>TOP_ELLIPSE</source>
2999             <translation>Create an ellipse</translation>
3000         </message>
3001         <message>
3002             <source>TOP_ERASE</source>
3003             <translation>Hide</translation>
3004         </message>
3005         <message>
3006             <source>TOP_ERASE_ALL</source>
3007             <translation>Hide all</translation>
3008         </message>
3009         <message>
3010             <source>TOP_EXPLODE</source>
3011             <translation>Explode</translation>
3012         </message>
3013         <message>
3014             <source>TOP_EXPLODE_BLOCKS</source>
3015             <translation>Explode on Blocks</translation>
3016         </message>
3017         <message>
3018             <source>TOP_EXPORT</source>
3019             <translation>Export geometry to BREP file</translation>
3020         </message>
3021         <message>
3022             <source>TOP_EXTRUSION</source>
3023             <translation>Create an extrusion</translation>
3024         </message>
3025         <message>
3026             <source>TOP_FACE</source>
3027             <translation>Build a face</translation>
3028         </message>
3029         <message>
3030             <source>TOP_FILLET</source>
3031             <translation>Fillet</translation>
3032         </message>
3033         <message>
3034             <source>TOP_FILLING</source>
3035             <translation>Create a filling</translation>
3036         </message>
3037         <message>
3038             <source>TOP_FUSE</source>
3039             <translation>Fuse</translation>
3040         </message>
3041         <message>
3042             <source>TOP_GLUE_FACES</source>
3043             <translation>Perform glue faces</translation>
3044         </message>
3045         <message>
3046             <source>TOP_GROUP_CREATE</source>
3047             <translation>Create a group</translation>
3048         </message>
3049         <message>
3050             <source>TOP_GROUP_EDIT</source>
3051             <translation>Edit a group</translation>
3052         </message>
3053         <message>
3054             <source>TOP_HEX_SOLID</source>
3055             <translation>Hexahedral Solid</translation>
3056         </message>
3057         <message>
3058             <source>TOP_IMPORT</source>
3059             <translation>Import geometry from BREP file</translation>
3060         </message>
3061         <message>
3062             <source>TOP_INERTIA</source>
3063             <translation>Compute intertia</translation>
3064         </message>
3065         <message>
3066             <source>TOP_ISOS</source>
3067             <translation>Set number of isolines</translation>
3068         </message>
3069         <message>
3070             <source>TOP_LINE</source>
3071             <translation>Create a line</translation>
3072         </message>
3073         <message>
3074             <source>TOP_LOCAL_CS</source>
3075             <translation>Create a local coordinate system</translation>
3076         </message>
3077         <message>
3078             <source>TOP_MASS_CENTER</source>
3079             <translation>Compute center of mass</translation>
3080         </message>
3081         <message>
3082             <source>TOP_MIN_DIST</source>
3083             <translation>Compute minimum distance</translation>
3084         </message>
3085         <message>
3086             <source>TOP_MIRROR</source>
3087             <translation>Mirror image</translation>
3088         </message>
3089         <message>
3090             <source>TOP_MODIFY_LOCATION</source>
3091             <translation>Modify the Location</translation>
3092         </message>
3093         <message>
3094             <source>TOP_MUL_ROTATION</source>
3095             <translation>Multi-Rotation</translation>
3096         </message>
3097         <message>
3098             <source>TOP_MUL_TRANSFORM</source>
3099             <translation>Multi-transformation</translation>
3100         </message>
3101         <message>
3102             <source>TOP_MUL_TRANSLATION</source>
3103             <translation>Multi-Translation</translation>
3104         </message>
3105         <message>
3106             <source>TOP_OFFSET</source>
3107             <translation>Offset surface</translation>
3108         </message>
3109         <message>
3110             <source>TOP_PARTITION</source>
3111             <translation>Partition</translation>
3112         </message>
3113         <message>
3114             <source>TOP_PIPE</source>
3115             <translation>Extrusion along a path</translation>
3116         </message>
3117         <message>
3118             <source>TOP_PLANE</source>
3119             <translation>Create a plane</translation>
3120         </message>
3121         <message>
3122             <source>TOP_POINT</source>
3123             <translation>Create a point</translation>
3124         </message>
3125         <message>
3126             <source>TOP_POINT_COORDS</source>
3127             <translation>Point coordinates</translation>
3128         </message>
3129         <message>
3130             <source>TOP_POINT_ON_EDGE</source>
3131             <translation>Add point on edge</translation>
3132         </message>
3133         <message>
3134             <source>TOP_POP_COLOR</source>
3135             <translation>Color</translation>
3136         </message>
3137         <message>
3138             <source>TOP_POP_CREATE_GROUP</source>
3139             <translation>Create Group</translation>
3140         </message>
3141         <message>
3142             <source>TOP_POP_ISOS</source>
3143             <translation>Isolines</translation>
3144         </message>
3145         <message>
3146             <source>TOP_POP_RENAME</source>
3147             <translation>Rename</translation>
3148         </message>
3149         <message>
3150             <source>TOP_POP_SHADING</source>
3151             <translation>Shading</translation>
3152         </message>
3153         <message>
3154             <source>TOP_POP_TRANSPARENCY</source>
3155             <translation>Transparency</translation>
3156         </message>
3157         <message>
3158             <source>TOP_POP_WIREFRAME</source>
3159             <translation>Wireframe</translation>
3160         </message>
3161         <message>
3162             <source>TOP_PROPAGATE</source>
3163             <translation>Propagate</translation>
3164         </message>
3165         <message>
3166             <source>TOP_Q_FACE</source>
3167             <translation>Quadrangle Face</translation>
3168         </message>
3169         <message>
3170             <source>TOP_REVOLUTION</source>
3171             <translation>Create a revolution</translation>
3172         </message>
3173         <message>
3174             <source>TOP_ROTATION</source>
3175             <translation>Rotation</translation>
3176         </message>
3177         <message>
3178             <source>TOP_SCALE</source>
3179             <translation>Scale transform</translation>
3180         </message>
3181         <message>
3182             <source>TOP_SECTION</source>
3183             <translation>Section</translation>
3184         </message>
3185         <message>
3186             <source>TOP_SEWING</source>
3187             <translation>Perform sewing</translation>
3188         </message>
3189         <message>
3190             <source>TOP_SHADING</source>
3191             <translation>Shading</translation>
3192         </message>
3193         <message>
3194             <source>TOP_SHADING_COLOR</source>
3195             <translation>Set shading color</translation>
3196         </message>
3197         <message>
3198             <source>TOP_SHAPE_PROCESS</source>
3199             <translation>Perform shape processing</translation>
3200         </message>
3201         <message>
3202             <source>TOP_SHELL</source>
3203             <translation>Build a shell</translation>
3204         </message>
3205         <message>
3206             <source>TOP_SKETCH</source>
3207             <translation>Sketch</translation>
3208         </message>
3209         <message>
3210             <source>TOP_SOLID</source>
3211             <translation>Build a solid</translation>
3212         </message>
3213         <message>
3214             <source>TOP_SPHERE</source>
3215             <translation>Create a sphere</translation>
3216         </message>
3217         <message>
3218             <source>TOP_STEP_VALUE</source>
3219             <translation>Set step value</translation>
3220         </message>
3221         <message>
3222             <source>TOP_SUPPERSS_HOLES</source>
3223             <translation>Perform suppress holes</translation>
3224         </message>
3225         <message>
3226             <source>TOP_SUPPRESS_FACES</source>
3227             <translation>Perform suppress faces</translation>
3228         </message>
3229         <message>
3230             <source>TOP_SUPPRESS_INT_WIRES</source>
3231             <translation>Perform suppress internal wires</translation>
3232         </message>
3233         <message>
3234             <source>TOP_TOLERANCE</source>
3235             <translation>Compute tolerance</translation>
3236         </message>
3237         <message>
3238             <source>TOP_TORUS</source>
3239             <translation>Create a torus</translation>
3240         </message>
3241         <message>
3242             <source>TOP_TRANSLATION</source>
3243             <translation>Translation</translation>
3244         </message>
3245         <message>
3246             <source>TOP_VECTOR</source>
3247             <translation>Create a vector</translation>
3248         </message>
3249         <message>
3250             <source>TOP_WHAT_IS</source>
3251             <translation>What is</translation>
3252         </message>
3253         <message>
3254             <source>TOP_WIRE</source>
3255             <translation>Build a wire</translation>
3256         </message>
3257         <message>
3258             <source>TOP_WORK_PLANE</source>
3259             <translation>Create a working plane</translation>
3260         </message>
3261         <message>
3262             <source>WRN_NOT_IMPLEMENTED</source>
3263             <translation>Sorry, this functionality is not yet implemented</translation>
3264         </message>
3265         <message>
3266             <source>_S_</source>
3267             <translation>(s)</translation>
3268         </message>
3269         <message>
3270             <source>NOT_FOUND_ANY</source>
3271             <translation>Not a single entity has been found</translation>
3272         </message>
3273         <message>
3274             <source>GEOM_FACE_I</source>
3275             <translation>Face %1</translation>
3276         </message>
3277         <message>
3278             <source>GEOM_CONSTANT_RADIUS</source>
3279             <translation>Radius :</translation>
3280         </message>
3281         <message>
3282             <source>GEOM_R1</source>
3283             <translation>R1 :</translation>
3284         </message>
3285         <message>
3286             <source>GEOM_R2</source>
3287             <translation>R2 :</translation>
3288         </message>
3289         <message>
3290             <source>GEOM_BOTHWAY</source>
3291             <translation>Both Directions</translation>
3292         </message>
3293         <message>
3294             <source>GEOM_NORMALE</source>
3295             <translation>Normal To A Face</translation>
3296         </message>
3297         <message>
3298             <source>GEOM_VECTOR_NORMALE</source>
3299             <translation>Vector_Normal</translation>
3300         </message>
3301         <message>
3302             <source>GEOM_LINE1</source>
3303             <translation>Line 1</translation>
3304         </message>
3305         <message>
3306             <source>GEOM_LINE2</source>
3307             <translation>Line 2</translation>
3308         </message>
3309         <message>
3310             <source>GEOM_D</source>
3311             <translation>D :</translation>
3312         </message>
3313         <message>
3314             <source>GEOM_CHAMFER_EDGE</source>
3315             <translation>Chamfer On Selected Edges</translation>
3316         </message>
3317         <message>
3318             <source>SELECTED_EDGE</source>
3319             <translation>Selected Edges</translation>
3320         </message>
3321         <message>
3322             <source>GEOM_NORMALE_TITLE</source>
3323             <translation>Create Normal To A Face</translation>
3324         </message>
3325         <message>
3326             <source>GEOM_MEASURE_ANGLE_TITLE</source>
3327             <translation>Angle Between Two Straight Edges/Lines/Vectors</translation>
3328         </message>
3329         <message>
3330             <source>GEOM_MEASURE_ANGLE_ANGLE</source>
3331             <translation>Angle</translation>
3332         </message>
3333         <message>
3334             <source>GEOM_MEASURE_ANGLE_OBJ</source>
3335             <translation>Objects And Results</translation>
3336         </message>
3337         <message>
3338             <source>GEOM_MEASURE_ANGLE_IS</source>
3339             <translation>Angle in degrees :</translation>
3340         </message>
3341         <message>
3342             <source>GEOM_LINE_INTERSECTION</source>
3343             <translation>Point On Lines Intersection</translation>
3344         </message>
3345         <message>
3346             <source>GEOM_KEEP_NONLIMIT_SHAPES</source>
3347             <translation>Keep nonlimit shapes</translation>
3348         </message>
3349         <message>
3350             <source>GEOM_CENTER_2POINTS</source>
3351             <translation>Center and two points</translation>
3352         </message>
3353         <message>
3354             <source>GEOM_REMOVE_EXTRA_EDGES_TITLE</source>
3355             <translation>Remove extra edges</translation>
3356         </message>
3357         <message>
3358             <source>GEOM_REMOVE_EXTRA_EDGES</source>
3359             <translation>Object to remove extra edges</translation>
3360         </message>
3361         <message>
3362             <source>REMOVE_EXTRA_EDGES_NEW_OBJ_NAME</source>
3363             <translation>NoExtraEdges</translation>
3364         </message>
3365         <message>
3366             <source>TOP_REMOVE_EXTRA_EDGES</source>
3367             <translation>Remove extra edges</translation>
3368         </message>
3369         <message>
3370             <source>MEN_REMOVE_EXTRA_EDGES</source>
3371             <translation>Remove extra edges</translation>
3372         </message>
3373         <message>
3374             <source>STB_REMOVE_EXTRA_EDGES</source>
3375             <translation>Remove extra edges</translation>
3376         </message>
3377         <message>
3378             <source>TOP_NORMALE</source>
3379             <translation>Compute normal to a face</translation>
3380         </message>
3381         <message>
3382             <source>MEN_NORMALE</source>
3383             <translation>Normal to a face</translation>
3384         </message>
3385         <message>
3386             <source>STB_NORMALE</source>
3387             <translation>Compute normal to a face in a point (optional)</translation>
3388         </message>
3389         <message>
3390             <source>TOP_MEASURE_ANGLE</source>
3391             <translation>Compute angle</translation>
3392         </message>
3393         <message>
3394             <source>MEN_MEASURE_ANGLE</source>
3395             <translation>Angle</translation>
3396         </message>
3397         <message>
3398             <source>STB_MEASURE_ANGLE</source>
3399             <translation>Compute angle between two lines or linear edges</translation>
3400         </message>
3401         <message>
3402             <source>TOP_POP_AUTO_COLOR</source>
3403             <translation>Auto color</translation>
3404         </message>
3405         <message>
3406             <source>MEN_POP_AUTO_COLOR</source>
3407             <translation>Auto color</translation>
3408         </message>
3409         <message>
3410             <source>STB_POP_AUTO_COLOR</source>
3411             <translation>Auto color</translation>
3412         </message>
3413         <message>
3414             <source>TOP_POP_DISABLE_AUTO_COLOR</source>
3415             <translation>Disable auto color</translation>
3416         </message>
3417         <message>
3418             <source>MEN_POP_DISABLE_AUTO_COLOR</source>
3419             <translation>Disable auto color</translation>
3420         </message>
3421         <message>
3422             <source>STB_POP_DISABLE_AUTO_COLOR</source>
3423             <translation>Disable auto color</translation>
3424         </message>
3425         <message>
3426             <source>GEOM_RESULT_NAME_GRP</source>
3427             <translation>Result name</translation>
3428         </message>
3429         <message>
3430             <source>GEOM_RESULT_NAME_LBL</source>
3431             <translation>Name</translation>
3432         </message>
3433         <message>
3434             <source>GEOM_FILLING_APPROX</source>
3435             <translation>Approximation</translation>
3436         </message>
3437     </context>
3438     <context>
3439         <name>BasicGUI_MarkerDlg</name>
3440         <message>
3441             <source>CAPTION</source>
3442             <translation>Local CS Construction</translation>
3443         </message>
3444         <message>
3445             <source>DX</source>
3446             <translation>Dx</translation>
3447         </message>
3448         <message>
3449             <source>DY</source>
3450             <translation>Dy</translation>
3451         </message>
3452         <message>
3453             <source>DZ</source>
3454             <translation>Dz</translation>
3455         </message>
3456         <message>
3457             <source>LCS_NAME</source>
3458             <translation>LocalCS</translation>
3459         </message>
3460         <message>
3461             <source>LOCALCS</source>
3462             <translation>Local coordinate system</translation>
3463         </message>
3464         <message>
3465             <source>ORIGIN</source>
3466             <translation>Coordinates of origin</translation>
3467         </message>
3468         <message>
3469             <source>VEC_PARALLEL</source>
3470             <translation>Coordinate system axes cannot be parallel</translation>
3471         </message>
3472         <message>
3473             <source>XDIR</source>
3474             <translation>X axis direction</translation>
3475         </message>
3476         <message>
3477             <source>YDIR</source>
3478             <translation>Y axis direction</translation>
3479         </message>
3480     </context>
3481     <context>
3482         <name>BlocksGUI_BlockDlg</name>
3483         <message>
3484             <source>FACE_1</source>
3485             <translation>Face 1</translation>
3486         </message>
3487         <message>
3488             <source>FACE_2</source>
3489             <translation>Face 2</translation>
3490         </message>
3491         <message>
3492             <source>FACE_3</source>
3493             <translation>Face 3</translation>
3494         </message>
3495         <message>
3496             <source>FACE_4</source>
3497             <translation>Face 4</translation>
3498         </message>
3499         <message>
3500             <source>FACE_5</source>
3501             <translation>Face 5</translation>
3502         </message>
3503         <message>
3504             <source>FACE_6</source>
3505             <translation>Face 6</translation>
3506         </message>
3507     </context>
3508     <context>
3509         <name>BlocksGUI_ExplodeDlg</name>
3510         <message>
3511             <source>NB_FACES_MAX</source>
3512             <translation>Max. nb. faces</translation>
3513         </message>
3514         <message>
3515             <source>NB_FACES_MIN</source>
3516             <translation>Min. nb. faces</translation>
3517         </message>
3518     </context>
3519     <context>
3520         <name>BlocksGUI_QuadFaceDlg</name>
3521         <message>
3522             <source>EDGE_1</source>
3523             <translation>Edge 1</translation>
3524         </message>
3525         <message>
3526             <source>EDGE_2</source>
3527             <translation>Edge 2</translation>
3528         </message>
3529         <message>
3530             <source>EDGE_3</source>
3531             <translation>Edge 3</translation>
3532         </message>
3533         <message>
3534             <source>EDGE_4</source>
3535             <translation>Edge 4</translation>
3536         </message>
3537         <message>
3538             <source>VERTEX_1</source>
3539             <translation>Vertex 1</translation>
3540         </message>
3541         <message>
3542             <source>VERTEX_2</source>
3543             <translation>Vertex 2</translation>
3544         </message>
3545         <message>
3546             <source>VERTEX_3</source>
3547             <translation>Vertex 3</translation>
3548         </message>
3549         <message>
3550             <source>VERTEX_4</source>
3551             <translation>Vertex 4</translation>
3552         </message>
3553     </context>
3554     <context>
3555         <name>BlocksGUI_TrsfDlg</name>
3556         <message>
3557             <source>FACE_1</source>
3558             <translation>Face 1</translation>
3559         </message>
3560         <message>
3561             <source>FACE_1U</source>
3562             <translation>Face 1 U</translation>
3563         </message>
3564         <message>
3565             <source>FACE_1V</source>
3566             <translation>Face 1 V</translation>
3567         </message>
3568         <message>
3569             <source>FACE_2</source>
3570             <translation>Face 2</translation>
3571         </message>
3572         <message>
3573             <source>FACE_2U</source>
3574             <translation>Face 2 U</translation>
3575         </message>
3576         <message>
3577             <source>FACE_2V</source>
3578             <translation>Face 2 V</translation>
3579         </message>
3580     </context>
3581     <context>
3582         <name>EntityGUI_SketcherDlg</name>
3583         <message>
3584             <source>CANNOT_CLOSE</source>
3585             <translation>It is impossible to close sketch\nNumber of sketch points too small</translation>
3586         </message>
3587     </context>
3588     <context>
3589         <name>EntityGUI_SubShapeDlg</name>
3590         <message>
3591             <source>NO_SUBSHAPES_SELECTED</source>
3592             <translation>Please, select one or more sub-shapes</translation>
3593         </message>
3594     </context>
3595     <context>
3596         <name>GroupGUI</name>
3597         <message>
3598             <source>NO_GROUP</source>
3599             <translation>Please, select a group to edit</translation>
3600         </message>
3601     </context>
3602     <context>
3603         <name>GroupGUI_GroupDlg</name>
3604         <message>
3605             <source>ADD</source>
3606             <translation>Add</translation>
3607         </message>
3608         <message>
3609             <source>CREATE_GROUP_TITLE</source>
3610             <translation>Create Group</translation>
3611         </message>
3612         <message>
3613             <source>EDIT_GROUP_TITLE</source>
3614             <translation>Edit Group</translation>
3615         </message>
3616         <message>
3617             <source>EMPTY_LIST</source>
3618             <translation>Please, select one or more sub-shapes to put into the group</translation>
3619         </message>
3620         <message>
3621             <source>EMPTY_NAME</source>
3622             <translation>Please, specify a non-empty group name</translation>
3623         </message>
3624         <message>
3625             <source>GROUP_NAME</source>
3626             <translation>Group Name</translation>
3627         </message>
3628         <message>
3629             <source>GROUP_PREFIX</source>
3630             <translation>Group</translation>
3631         </message>
3632         <message>
3633             <source>MAIN_SHAPE</source>
3634             <translation>Main Shape</translation>
3635         </message>
3636         <message>
3637             <source>MAIN_SUB_SHAPES</source>
3638             <translation>Main Shape And Sub-Shapes</translation>
3639         </message>
3640         <message>
3641             <source>NO_GROUP</source>
3642             <translation>Please, select a group to edit</translation>
3643         </message>
3644         <message>
3645             <source>NO_MAIN_OBJ</source>
3646             <translation>Please, select a main shape</translation>
3647         </message>
3648         <message>
3649             <source>REMOVE</source>
3650             <translation>Remove</translation>
3651         </message>
3652         <message>
3653             <source>SELECT_ALL</source>
3654             <translation>Select All</translation>
3655         </message>
3656         <message>
3657             <source>SELECT_SUB_SHAPES</source>
3658             <translation>Select Sub-Shapes</translation>
3659         </message>
3660         <message>
3661             <source>SHAPE_TYPE</source>
3662             <translation>Shape Type</translation>
3663         </message>
3664     </context>
3665     <context>
3666         <name>MeasureGUI_1Sel1TextView1Check_QTD</name>
3667         <message>
3668             <source>CHECK_SHAPE_GEOMETRY</source>
3669             <translation>Check also geometry</translation>
3670         </message>
3671     </context>
3672     <context>
3673         <name>MeasureGUI_PointDlg</name>
3674         <message>
3675             <source>CAPTION</source>
3676             <translation>Point Coordinates</translation>
3677         </message>
3678         <message>
3679             <source>COORDINATES</source>
3680             <translation>Point and its coordinates</translation>
3681         </message>
3682         <message>
3683             <source>POINT</source>
3684             <translation>Point</translation>
3685         </message>
3686         <message>
3687             <source>X</source>
3688             <translation>X</translation>
3689         </message>
3690         <message>
3691             <source>Y</source>
3692             <translation>Y</translation>
3693         </message>
3694         <message>
3695             <source>Z</source>
3696             <translation>Z</translation>
3697         </message>
3698     </context>
3699     <context>
3700         <name>OperationGUI_ChamferDlg</name>
3701         <message>
3702             <source>D</source>
3703             <translation>D</translation>
3704         </message>
3705         <message>
3706             <source>FACE_1</source>
3707             <translation>Face 1</translation>
3708         </message>
3709         <message>
3710             <source>FACE_2</source>
3711             <translation>Face 2</translation>
3712         </message>
3713         <message>
3714             <source>SELECTED_FACES</source>
3715             <translation>Selected faces</translation>
3716         </message>
3717     </context>
3718     <context>
3719         <name>OperationGUI_FilletDlg</name>
3720         <message>
3721             <source>SELECTED_EDGES</source>
3722             <translation>Selected edges</translation>
3723         </message>
3724         <message>
3725             <source>SELECTED_FACES</source>
3726             <translation>Selected faces</translation>
3727         </message>
3728     </context>
3729     <context>
3730         <name>RepairGUI_FreeBoundDlg</name>
3731         <message>
3732             <source>CAPTION</source>
3733             <translation>Check free boundaries</translation>
3734         </message>
3735         <message>
3736             <source>FREE_BOUND</source>
3737             <translation>Free boundaries</translation>
3738         </message>
3739         <message>
3740             <source>NUMBER_CLOSED</source>
3741             <translation>Number of closed free boundaries: </translation>
3742         </message>
3743         <message>
3744             <source>NUMBER_OPEN</source>
3745             <translation>Number of open free boundaries: </translation>
3746         </message>
3747     </context>
3748     <context>
3749         <name>RepairGUI_GlueDlg</name>
3750         <message>
3751             <source>FACES_FOR_GLUING_ARE_DETECTED</source>
3752             <translation>There are %1 face(s) that can be glued. They are coloured on the screen with red colour\nPlease close this message box and select faces for glueing</translation>
3753         </message>
3754         <message>
3755             <source>GLUE_FACES</source>
3756             <translation>Glue faces</translation>
3757         </message>
3758         <message>
3759             <source>SELECT_FACES</source>
3760             <translation>Select Faces</translation>
3761         </message>
3762         <message>
3763             <source>THERE_ARE_NO_FACES_FOR_GLUING</source>
3764             <translation>There are no faces for gluing</translation>
3765         </message>
3766     </context>
3767     <context>
3768         <name>RepairGUI_ShapeProcessDlg</name>
3769         <message>
3770             <source>ERROR_NO_OBJECTS</source>
3771             <translation>Please, select a geometrical object for Shape Processing.</translation>
3772         </message>
3773         <message>
3774             <source>ERROR_NO_OPERATORS</source>
3775             <translation>Please, select at least one Shape Process operation to proceed.</translation>
3776         </message>
3777         <message>
3778             <source>TIME_CONSUMING</source>
3779             <translation>Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?</translation>
3780         </message>
3781     </context>
3782 </TS>