1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: 2003-10-27 17:32+0100\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
65 msgid "GEOM_BUT_EXPLODE"
69 #==============================================================================
72 #: GeometryGUI.cxx:563
73 msgid "GEOM_INF_LOADED"
74 msgstr "File %1 loaded."
77 #==============================================================================
80 #: GeometryGUI.cxx:3069
81 msgid "GEOM_PRP_COMMAND"
82 msgstr "No command associated with this id = %1."
84 #: GeometryGUI.cxx:4977
85 msgid "GEOM_PRP_ABORT"
86 msgstr "Operation aborted"
88 #: GeometryGUI.cxx:5058
90 msgstr "Operation done"
92 #: GeometryGUI.cxx:3717
93 msgid "GEOM_PRP_LOADING"
94 msgstr "Loading %1 ..."
96 #: GeometryGUI.cxx:1412
97 msgid "GEOM_PRP_NULLSHAPE"
98 msgstr "Error, null or inappropriate shape !"
100 #: GeometryGUI.cxx:5072
101 msgid "GEOM_PRP_READY"
104 #: GeometryGUI.cxx:1690
105 msgid "GEOM_PRP_SELECT_SUBSHAPES"
106 msgstr "Select Sub Shapes"
108 msgid "GEOM_PRP_EXPORT"
109 msgstr "Exporting geometry to %1 ..."
112 msgstr "Confirm operation"
114 msgid "GEOM_CONFIRM_INFO"
115 msgstr "Shape contains %1 sub shapes !"
118 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
119 msgstr "Not allowed in VTK viewer"
121 #: GeometryGUI.cxx:1690
122 msgid "GEOM_PRP_SHAPE_IN_STUDY"
123 msgstr "Main shape must be in the study before"
125 #: GeometryGUI.cxx:1690
126 msgid "GEOM_PRP_SELECT_EDGE"
127 msgstr "Select edges and click on Apply"
129 #: GeometryGUI.cxx:1690
130 msgid "GEOM_PRP_SELECT_FACE"
131 msgstr "Select faces to suppress and click on Ok/Apply"
133 #: GeometryGUI.cxx:1690
134 msgid "GEOM_PRP_SELECT_FIRST"
135 msgstr "Select main shape first"
137 #: GeometryGUI.cxx:1690
138 msgid "GEOM_PRP_MIN_DIST"
139 msgstr "Min Distance not computed"
141 msgid "GEOM_STUDY_LOCKED"
142 msgstr "The active study is locked and therefore cannot be modified"
145 #==============================================================================
148 #: GeometryGUI.cxx:3698
149 msgid "GEOM_MEN_ALL_FILES"
150 msgstr "All Files ( * )"
152 #: GeometryGUI.cxx:4389
153 msgid "GEOM_MEN_ANGLE"
156 #: GeometryGUI.cxx:3941
157 msgid "GEOM_MEN_COMPONENT"
160 #: GeometryGUI.cxx:4389
161 msgid "GEOM_MEN_ENTER_ANGLE"
162 msgstr "Enter An Angle In Degrees"
164 #: GeometryGUI.cxx:3758
165 msgid "GEOM_MEN_EXPORT"
168 #: GeometryGUI.cxx:3648
169 msgid "GEOM_MEN_IMPORT"
172 #: GeometryGUI.cxx:2931
173 msgid "GEOM_MEN_ISOS"
174 msgstr "Select Number Of Isos"
176 #: GeometryGUI.cxx:4278
177 msgid "GEOM_MEN_POPUP_NAME"
180 #: GeometryGUI.cxx:4414
181 msgid "GEOM_MEN_SKETCHER_X"
182 msgstr "Enter a length to set X"
184 #: GeometryGUI.cxx:4438
185 msgid "GEOM_MEN_SKETCHER_Y"
186 msgstr "Enter a length to set Y"
188 #: GeometryGUI.cxx:2898
189 msgid "GEOM_MEN_TRANSPARENCY"
190 msgstr "Transparency"
192 #: GeometryGUI.cxx:4413
196 #: GeometryGUI.cxx:4437
200 #: GeometryGUI_NbIsosDlg.cxx:36
201 msgid "GEOM_MEN_ISOU"
204 #: GeometryGUI_NbIsosDlg.cxx:53
205 msgid "GEOM_MEN_ISOV"
208 #: GeometryGUI_TransparencyDlg.cxx:31
209 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
210 msgstr "Transparency :"
212 msgid "GEOM_MEN_STEP_LABEL"
215 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
216 msgstr "Identical names : select by mouse !"
218 msgid "GEOM_NAME_INCORRECT"
219 msgstr "Object name not found"
221 msgid "GEOM_INCORRECT_INPUT"
222 msgstr "Incorrect input data!"
225 #==============================================================================
228 #: GeometryGUI.cxx:892
229 msgid "GEOM_WRN_RADIUS_NULL"
230 msgstr "Radius is null"
232 #: GeometryGUI.cxx:3854
233 msgid "GEOM_WRN_WARNING"
236 #: GeometryGUI.cxx:3854
237 msgid "GEOM_REALLY_DELETE"
238 msgstr "Do you really want to delete object(s) ?"
241 #==============================================================================
249 msgid "GEOM_MAIN_OBJECT"
253 msgid "GEOM_TOOL_OBJECT"
257 msgid "GEOM_BASE_OBJECT"
261 msgid "GEOM_PATH_OBJECT"
269 msgid "GEOM_OBJECT_I"
273 msgid "GEOM_OBJECT_RESULT"
274 msgstr "Object And Result"
281 msgid "GEOM_BASE_POINT"
285 msgid "GEOM_CENTER_POINT"
286 msgstr "Center Point"
289 msgid "GEOM_DIAGONAL_POINTS"
290 msgstr "Diagonal Points"
293 msgid "GEOM_CENTRAL_POINT"
294 msgstr "Central Point"
305 msgid "GEOM_ARGUMENTS"
317 msgid "GEOM_RADIUS_I"
333 msgid "GEOM_COORDINATES"
345 msgid "GEOM_REVERSE_U"
349 msgid "GEOM_REVERSE_V"
365 msgid "GEOM_VECTOR_LENGTH"
366 msgstr "Vector Length :"
369 msgid "GEOM_REVERSE_VECTOR"
370 msgstr "Reverse Vector"
373 msgid "GEOM_POINT_MIRROR"
374 msgstr "Point Mirror"
377 msgid "GEOM_AXE_MIRROR"
381 msgid "GEOM_PLANE_MIRROR"
382 msgstr "Plane Mirror"
385 msgid "GEOM_FACE_SELECTION"
386 msgstr "Face Selection"
393 msgid "GEOM_WATER_DENSITY"
394 msgstr "Water Density :"
397 msgid "GEOM_MESHING_DEFLECTION"
398 msgstr "Meshing Deflect. :"
401 msgid "GEOM_DIMENSIONS"
405 msgid "GEOM_PRECISION"
409 msgid "GEOM_SELECTION"
413 msgid "GEOM_NB_TIMES"
417 msgid "GEOM_NB_TIMES_U"
418 msgstr "Nb. Times U :"
421 msgid "GEOM_NB_TIMES_V"
422 msgstr "Nb. Times V :"
437 #==============================================================================
441 msgid "GEOM_PARTITION"
444 #Half-space partition
445 msgid "GEOM_PARTITION_HALFSPACE"
446 msgstr "Half-space partition"
449 msgid "GEOM_TOLERANCE"
453 msgid "GEOM_ORIENTATION"
461 msgid "GEOM_REVOLUTION"
465 msgid "GEOM_ROTATION"
469 msgid "GEOM_ARCHIMEDE"
481 msgid "GEOM_DISTANCE"
497 msgid "GEOM_POSITION"
513 msgid "GEOM_TRANSLATION"
518 msgstr "Working Plane"
525 msgid "GEOM_EXTRUSION"
529 msgid "GEOM_SUB_SHAPE"
533 msgid "GEOM_SUPRESSFACE"
534 msgstr "Supress Face"
545 msgid "GEOM_CHECK_SHAPE"
548 #Check Blocks Compound
549 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
550 msgstr "Check and Improve Blocks Compound"
552 #Check Blocks Compound Errors
553 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
556 #Check Blocks Compound Errors
557 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
558 msgstr "The Compound of Blocks has no errors"
560 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
561 msgstr "The Compound of Blocks has errors"
563 #Check Blocks Compound SubShapes
564 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
565 msgstr "Incriminated Sub-Shapes"
573 msgstr "Bounding Box"
577 msgstr "Center Of Mass"
580 msgid "GEOM_PROPERTIES"
581 msgstr "Basic Properties"
584 msgid "GEOM_MULTITRANSLATION"
585 msgstr "Multi-Translation"
588 msgid "GEOM_MULTIROTATION"
589 msgstr "Multi-Rotation"
592 #==============================================================================
611 msgid "GEOM_ELLIPSE_TITLE"
612 msgstr "Ellipse Construction"
615 msgid "GEOM_RADIUS_MAJOR"
616 msgstr "Major radius :"
619 msgid "GEOM_RADIUS_MINOR"
620 msgstr "Minor radius :"
623 msgid "GEOM_COMPOUND"
627 msgid "GEOM_BLOCKS_COMPOUND"
628 msgstr "BlocksCompound"
631 msgid "GEOM_COMPOUNDSOLID"
639 msgid "GEOM_CYLINDER"
655 msgid "GEOM_FACE_OR_LCS"
687 msgid "GEOM_SURFCONE"
688 msgstr "Conical Face"
691 msgid "GEOM_SURFCYLINDER"
692 msgstr "Cylindrical Face"
695 msgid "GEOM_SURFSPHERE"
696 msgstr "Spherical Face"
699 msgid "GEOM_SURFTORUS"
700 msgstr "Toroidal Face"
711 msgid "GEOM_VECTOR_U"
715 msgid "GEOM_VECTOR_V"
735 msgstr "Imported_Shape"
738 msgid "GEOM_PARAMETER"
742 #==============================================================================
786 #==============================================================================
790 msgid "GEOM_STEP_TITLE"
791 msgstr "Step value for GUI constructions"
793 #: GeometryGUI_ArcDlg.cxx:45
794 msgid "GEOM_ARC_TITLE"
795 msgstr "Arc Construction"
797 #: GeometryGUI_ArchimedeDlg.cxx:55
798 msgid "GEOM_ARCHIMEDE_TITLE"
799 msgstr "Archimede Construction"
801 #: GeometryGUI_BndBoxDlg.cxx:59
802 msgid "GEOM_BNDBOX_TITLE"
803 msgstr "Bounding Box Informations"
805 #: GeometryGUI_BndBoxDlg.cxx:82
806 msgid "GEOM_BNDBOX_OBJDIM"
807 msgstr "Object And Its Dimensions"
809 #: GeometryGUI_BoxDlg.cxx:50
810 msgid "GEOM_BOX_TITLE"
811 msgstr "Box Construction"
813 #: GeometryGUI_BoxDlg.cxx:50
815 msgstr "Dimensions At Origin"
817 #: GeometryGUI_ChamferDlg.cxx:58
818 msgid "GEOM_CHAMFER_TITLE"
819 msgstr "Chamfer Construction"
821 #: GeometryGUI_ChamferDlg.cxx:58
822 msgid "GEOM_CHAMFER_ALL"
823 msgstr "Chamfer On Whole Shape"
825 #: GeometryGUI_ChamferDlg.cxx:58
826 msgid "GEOM_CHAMFER_EDGES"
827 msgstr "Chamfer On Edges From Shape"
829 #: GeometryGUI_ChamferDlg.cxx:58
830 msgid "GEOM_CHAMFER_FACES"
831 msgstr "Chamfer On Faces From Shape"
833 #: GeometryGUI_CircleDlg.cxx:48
834 msgid "GEOM_CIRCLE_TITLE"
835 msgstr "Circle Construction"
837 #: GeometryGUI_CenterMassDlg.cxx:77
838 msgid "GEOM_CMASS_TITLE"
839 msgstr "Center Of Mass Construction"
841 msgid "GEOM_PLANE_SIZE"
842 msgstr "Size of plane :"
844 #: GeometryGUI_CommonDlg.cxx:47
845 msgid "GEOM_COMMON_TITLE"
846 msgstr "BOOLEAN : Common Of Two Objects"
848 #: GeometryGUI_CompoundDlg.cxx:44
849 msgid "GEOM_COMPOUND_TITLE"
850 msgstr "Create A Compound"
852 #: GeometryGUI_ConeDlg.cxx:49
853 msgid "GEOM_CONE_TITLE"
854 msgstr "Cone Construction"
856 #: GeometryGUI_CutDlg.cxx:48
857 msgid "GEOM_CUT_TITLE"
858 msgstr "BOOLEAN : Cut Of Two Objects"
860 #: GeometryGUI_CylinderDlg.cxx:47
861 msgid "GEOM_CYLINDER_TITLE"
862 msgstr "Cylinder Construction"
864 #: GeometryGUI_CheckShape.cxx:60
865 msgid "GEOM_CHECK_TITLE"
866 msgstr "Check Shape Informations"
868 #: GeometryGUI_CheckShape.cxx:83
869 msgid "GEOM_CHECK_INFOS"
870 msgstr "Object And Its Topological Informations"
872 #: GeometryGUI_DistanceDlg.cxx:57
873 msgid "GEOM_MINDIST_TITLE"
874 msgstr "Minimun Distance Between Two Objects"
876 #: GeometryGUI_DistanceDlg.cxx:57
877 msgid "GEOM_MINDIST_OBJ"
878 msgstr "Objects And Results"
880 #: GeometryGUI_EdgeDlg.cxx:47
881 msgid "GEOM_EDGE_TITLE"
882 msgstr "Create An Edge"
884 #: GeometryGUI_FilletDlg.cxx:58
885 msgid "GEOM_FILLET_TITLE"
886 msgstr "Fillet Construction"
888 #: GeometryGUI_FilletDlg.cxx:58
889 msgid "GEOM_FILLET_ALL"
890 msgstr "Fillet On Whole Shape"
892 #: GeometryGUI_FilletDlg.cxx:58
893 msgid "GEOM_FILLET_EDGES"
894 msgstr "Fillet On Edges From Shape"
896 #: GeometryGUI_FilletDlg.cxx:58
897 msgid "GEOM_FILLET_FACES"
898 msgstr "Fillet On Faces From Shape"
900 #: GeometryGUI_FaceDlg.cxx:49
901 msgid "GEOM_FACE_TITLE"
902 msgstr "Create A Face"
904 #: GeometryGUI_FaceDlg.cxx:78
905 msgid "GEOM_FACE_FFW"
906 msgstr "Face from a closed wire and edge"
908 #: GeometryGUI_FaceDlg.cxx:103
909 msgid "GEOM_FACE_OPT"
910 msgstr "Try to create a planar face"
912 #: GeometryGUI_FillingDlg.cxx:53
913 msgid "GEOM_FILLING_TITLE"
914 msgstr "Filling Surface With Edges"
916 #: GeometryGUI_FillingDlg.cxx:112
917 msgid "GEOM_FILLING_ARG"
918 msgstr "Arguments And Parameters"
920 #: GeometryGUI_FillingDlg.cxx:128
921 msgid "GEOM_FILLING_MIN_DEG"
924 #: GeometryGUI_FillingDlg.cxx:142
925 msgid "GEOM_FILLING_MAX_DEG"
928 #: GeometryGUI_FillingDlg.cxx:150
929 msgid "GEOM_FILLING_TOL_2D"
932 #: GeometryGUI_FillingDlg.cxx:170
933 msgid "GEOM_FILLING_COMPOUND"
934 msgstr "Edges compound"
936 #: GeometryGUI_FillingDlg.cxx:184
937 msgid "GEOM_FILLING_TOL_3D"
940 #: GeometryGUI_FillingDlg.cxx:192
941 msgid "GEOM_FILLING_NB_ITER"
944 #: GeometryGUI_FuseDlg.cxx:48
945 msgid "GEOM_FUSE_TITLE"
946 msgstr "BOOLEAN : Fuse Two Objects"
948 #: GeometryGUI_InertiaDlg.cxx:42
949 msgid "GEOM_INERTIA_TITLE"
950 msgstr "Calculs Of Inertia"
952 #: GeometryGUI_InertiaDlg.cxx:50
953 msgid "GEOM_INERTIA_CONSTR"
954 msgstr "Matrix And Moments Of Inertia"
956 #: GeometryGUI_InertiaDlg.cxx:100
957 msgid "GEOM_INERTIA_I"
960 #: GeometryGUI_InertiaDlg.cxx:182
961 msgid "GEOM_INERTIA_IXYZ"
962 msgstr "IX & IY & IZ :"
964 #: GeometryGUI_LineDlg.cxx:50
965 msgid "GEOM_LINE_TITLE"
966 msgstr "Line Construction"
968 #: GeometryGUI_MaxToleranceDlg.cxx:53
969 msgid "GEOM_TOLERANCE_TITLE"
970 msgstr "Maximum Tolerance"
972 #: GeometryGUI_MaxToleranceDlg.cxx:84
973 msgid "GEOM_TOLERANCE_CONSTR"
974 msgstr "Object And Its Tolerances"
976 #: GeometryGUI_MaxToleranceDlg.cxx:121
977 msgid "GEOM_TOLERANCE_FACE"
980 #: GeometryGUI_MaxToleranceDlg.cxx:138
981 msgid "GEOM_TOLERANCE_EDGE"
984 #: GeometryGUI_MaxToleranceDlg.cxx:155
985 msgid "GEOM_TOLERANCE_VERTEX"
988 #: GeometryGUI_MirrorDlg.cxx:52
989 msgid "GEOM_MIRROR_TITLE"
990 msgstr "Mirror An Object"
992 #: GeometryGUI_OrientationDlg.cxx:46
993 msgid "GEOM_ORIENTATION_TITLE"
994 msgstr "Change Orientation"
996 #: GeometryGUI_OrientationDlg.cxx:134
997 msgid "GEOM_ORIENTATION_OPT"
998 msgstr "Reverse orientation with normal vectors simulation"
1000 #: GeometryGUI_PartitionDlg.cxx:45
1001 msgid "GEOM_PARTITION_TITLE"
1002 msgstr "Partition Of Object With Tool"
1004 #: GeometryGUI_PartitionDlg.cxx:45
1005 msgid "GEOM_KEEP_OBJECT"
1006 msgstr "Keep Object"
1008 #: GeometryGUI_PartitionDlg.cxx:45
1009 msgid "GEOM_PARTITION_ORIENTATION"
1010 msgstr "Change Orientation"
1012 #: GeometryGUI_PartitionDlg.cxx:45
1013 msgid "SUPPRESS_RESULT"
1014 msgstr "Suppress Result"
1016 msgid "GEOM_REMOVE_WEBS"
1017 msgstr "Remove webs"
1019 msgid "GEOM_SET_MATERIALS"
1020 msgstr "Set materials"
1022 #: OperationGUI_MaterialDlg.cxx:45
1023 msgid "GEOM_MATERIAL_TITLE"
1024 msgstr "Define materials for Dominant Fuse"
1026 msgid "GEOM_MATERIAL_SHAPE"
1029 msgid "GEOM_MATERIAL_MATERIAL"
1032 msgid "GEOM_MATERIAL_ID"
1033 msgstr "Material ID:"
1035 msgid "GEOM_MATERIAL_SET"
1038 #: GeometryGUI_PipeDlg.cxx:47
1039 msgid "GEOM_PIPE_TITLE"
1040 msgstr "Pipe Construction"
1042 #: GeometryGUI_PointDlg.cxx:52
1043 msgid "GEOM_POINT_TITLE"
1044 msgstr "Point Construction"
1046 #: GeometryGUI_PlaneDlg.cxx:60
1047 msgid "GEOM_PLANE_TITLE"
1048 msgstr "Plane Construction"
1050 #: GeometryGUI_PlaneDlg.cxx:172
1051 msgid "GEOM_PLANE_PVC"
1052 msgstr "Point + Coordinate Vector"
1054 #: GeometryGUI_PlaneDlg.cxx:133
1055 msgid "GEOM_PLANE_PV"
1056 msgstr "Point + Vector"
1058 #: GeometryGUI_PrismDlg.cxx:54
1059 msgid "GEOM_EXTRUSION_TITLE"
1060 msgstr "Construction by Extrusion"
1062 #: GeometryGUI_PrismDlg.cxx:83
1063 msgid "GEOM_EXTRUSION_BSV"
1064 msgstr "Base Shape + Vector"
1066 msgid "GEOM_EXTRUSION_BSV_2P"
1067 msgstr "Base Shape + 2 Points"
1069 #: GeometryGUI_PropertiesDlg.cxx:56
1070 msgid "GEOM_PROPERTIES_TITLE"
1071 msgstr "Basic Properties Informations"
1073 #: GeometryGUI_PropertiesDlg.cxx:78
1074 msgid "GEOM_PROPERTIES_CONSTR"
1075 msgstr "Object And Its Properties"
1077 #: GeometryGUI_PropertiesDlg.cxx:114
1078 msgid "GEOM_PROPERTIES_SURFACE"
1079 msgstr "Surface is :"
1081 #: GeometryGUI_PropertiesDlg.cxx:120
1082 msgid "GEOM_PROPERTIES_VOLUME"
1083 msgstr "Volume is :"
1085 #: GeometryGUI_RevolDlg.cxx:49
1086 msgid "GEOM_REVOLUTION_TITLE"
1087 msgstr "Construction By Revolution"
1089 #: GeometryGUI_RotationDlg.cxx:51
1090 msgid "GEOM_ROTATION_TITLE"
1091 msgstr "Rotation Of An Object"
1093 #: GeometryGUI_ScaleDlg.cxx:52
1094 msgid "GEOM_SCALE_TITLE"
1095 msgstr "Scale An Object"
1097 #: GeometryGUI_PositionDlg.cxx:52
1098 msgid "GEOM_POSITION_TITLE"
1099 msgstr "Modify the Location of an Object"
1101 #: GeometryGUI_PositionDlg.cxx:52
1102 msgid "GEOM_START_LCS"
1105 #: GeometryGUI_PositionDlg.cxx:52
1106 msgid "GEOM_END_LCS"
1109 #: GeometryGUI_OffsetDlg.cxx:53
1110 msgid "GEOM_OFFSET_TITLE"
1111 msgstr "Offset Surface"
1113 #: GeometryGUI_ScaleDlg.cxx:117
1114 msgid "GEOM_SCALE_FACTOR"
1115 msgstr "Scale Factor :"
1117 #: GeometryGUI_SectionDlg.cxx:50
1118 msgid "GEOM_SECTION_TITLE"
1119 msgstr "BOOLEAN : Section Of Two Objects"
1121 #: GeometryGUI_SewingDlg.cxx:48
1122 msgid "GEOM_SEWING_TITLE"
1123 msgstr "Topological sewing"
1125 #: GeometryGUI_ShellDlg.cxx:53
1126 msgid "GEOM_SHELL_TITLE"
1127 msgstr "Shell Construction"
1129 #: GeometryGUI_SolidDlg.cxx:74
1130 msgid "GEOM_SOLID_TITLE"
1131 msgstr "Solid Construction"
1133 #: GeometryGUI_SphereDlg.cxx:50
1134 msgid "GEOM_SPHERE_TITLE"
1135 msgstr "Sphere Construction"
1137 #: GeometryGUI_SphereDlg.cxx:113
1138 msgid "GEOM_SPHERE_CR"
1139 msgstr "Center + Radius"
1141 #: GeometryGUI_SphereDlg.cxx:146
1142 msgid "GEOM_SPHERE_RO"
1143 msgstr "Radius At Origin"
1145 #: GeometryGUI_SubShapeDlg.cxx:55
1146 msgid "GEOM_SUBSHAPE_TITLE"
1147 msgstr "Sub Shapes Selection"
1149 #: GeometryGUI_SubShapeDlg.cxx:131
1150 msgid "GEOM_SUBSHAPE_TYPE"
1151 msgstr "Sub Shapes Type :"
1153 #: GeometryGUI_SubShapeDlg.cxx:137
1154 msgid "GEOM_SUBSHAPE_SELECT"
1155 msgstr "Select Sub Shapes"
1157 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1158 msgstr "Please, select one or more sub-shapes"
1160 #: GeometryGUI_TorusDlg.cxx:51
1161 msgid "GEOM_TORUS_TITLE"
1162 msgstr "Torus Construction"
1164 #: GeometryGUI_SuppressFacesDlg.cxx:103
1165 msgid "GEOM_SUPRESSFACE_TITLE"
1166 msgstr "Suppress Faces In An Object"
1168 #: GeometryGUI_SuppressFacesDlg.cxx:164
1169 msgid "GEOM_SUPRESSFACE_SELECT"
1170 msgstr "Select Faces To Suppress"
1172 #: GeometryGUI_TranslationDlg.cxx:78
1173 msgid "GEOM_TRANSLATION_COOR"
1174 msgstr "Translation With Coordinates"
1176 msgid "GEOM_TRANSPARENCY_TITLE"
1177 msgstr "Transparency"
1179 msgid "GEOM_TRANSPARENCY_OPAQUE"
1182 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1183 msgstr "Transparent"
1185 msgid "GEOM_SUPPRESSHOLE_TITLE"
1186 msgstr "Suppress holes"
1188 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1189 msgstr "Select the face with hole"
1191 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1192 msgstr "Select wire on face"
1194 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1195 msgstr "Select end face (if hole traversing)"
1197 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1198 msgstr "Select end wire (if hole traversing)"
1200 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1201 msgstr "Face or shell"
1203 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1204 msgstr "Select hole(s) on the face"
1206 #: GeometryGUI_TranslationDlg.cxx:56
1207 msgid "GEOM_TRANSLATION_TITLE"
1208 msgstr "Translation Of An Object"
1210 #: GeometryGUI_VectorDlg.cxx:54
1211 msgid "GEOM_VECTOR_TITLE"
1212 msgstr "Vector Construction"
1214 #: GeometryGUI_WhatisDlg.cxx:63
1215 msgid "GEOM_WHATIS_TITLE"
1216 msgstr "Whatis Informations"
1218 #: GeometryGUI_WhatisDlg.cxx:86
1219 msgid "GEOM_WHATIS_OBJECT"
1220 msgstr "Object And Its Topological Informations"
1222 #: GeometryGUI_WireDlg.cxx:46
1223 msgid "GEOM_WIRE_TITLE"
1224 msgstr "Create A Wire"
1226 #: GeometryGUI_WireDlg.cxx:103
1227 msgid "GEOM_WIRE_CONNECT"
1228 msgstr "Wire creation from wires/edges connected"
1230 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1231 msgid "GEOM_WPLANE_TITLE"
1232 msgstr "Working Plane Selection"
1234 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1235 msgid "GEOM_WPLANE_FACE"
1236 msgstr "Plane, Planar Face or LCS"
1238 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1239 msgid "GEOM_WPLANE_VECTOR"
1240 msgstr "Select 2 vectors"
1242 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1243 msgid "GEOM_WPLANE_VX"
1246 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1247 msgid "GEOM_WPLANE_VZ"
1250 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1251 msgid "GEOM_WPLANE_ORIGIN"
1252 msgstr "Select a plane"
1254 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1255 msgid "GEOM_WPLANE_OYZ"
1258 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1259 msgid "GEOM_WPLANE_OZX"
1262 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1263 msgid "GEOM_WPLANE_OXY"
1266 #: GeometryGUI_multiTranslationDlg.cxx:107
1267 msgid "GEOM_MULTITRANSLATION_TITLE"
1268 msgstr "Multi-Translation"
1270 #: GeometryGUI_multiTranslationDlg.cxx:107
1271 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1272 msgstr "Multi Translation Simple"
1274 #: GeometryGUI_multiTranslationDlg.cxx:107
1275 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1276 msgstr "Multi Translation Double"
1278 #: GeometryGUI_multiRotationDlg.cxx:107
1279 msgid "GEOM_MULTIROTATION_TITLE"
1280 msgstr "Multi-Rotation"
1282 #: GeometryGUI_multiRotationDlg.cxx:107
1283 msgid "GEOM_MULTIROTATION_SIMPLE"
1284 msgstr "Multi Rotation Simple"
1286 #: GeometryGUI_multiRotationDlg.cxx:107
1287 msgid "GEOM_MULTIROTATION_DOUBLE"
1288 msgstr "Multi Rotation Double"
1290 msgid "GEOM_PARAM_POINT"
1291 msgstr "Parametric point"
1293 msgid "GEOM_REF_POINT"
1294 msgstr "Point with reference"
1297 #==============================================================================
1300 #: GeometryGUI.cxx:4613
1301 msgid "GEOM_MEN_WIREFRAME"
1304 #: GeometryGUI.cxx:4613
1305 msgid "GEOM_MEN_SHADING"
1308 msgid "GEOM_RECONSTRUCTION_LIMIT"
1309 msgstr "Reconstruction Limit"
1311 msgid "GEOM_SUPPRESS_RESULT"
1312 msgstr "Suppress Result"
1314 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1317 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1320 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1322 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1324 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1326 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1328 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1330 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1332 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1335 msgid "GEOM_SPLINE_TITLE"
1336 msgstr "Spline Construction"
1341 msgid "GEOM_INTERPOL"
1342 msgstr "Interpolation"
1345 #==============================================================================
1348 msgid "GEOM_SKETCHER_EL"
1349 msgstr "Element Type"
1351 msgid "GEOM_BUT_CLOSE_SKETCH"
1352 msgstr "Sketch Closure"
1354 msgid "GEOM_BUT_END_SKETCH"
1355 msgstr "Sketch Validation"
1357 msgid "GEOM_SKETCHER_TITLE"
1358 msgstr "Sketch Construction"
1360 msgid "GEOM_SKETCHER_POINT"
1363 msgid "GEOM_SKETCHER_SEGMENT"
1366 msgid "GEOM_SKETCHER_ARC"
1369 msgid "GEOM_SKETCHER_DIR"
1372 msgid "GEOM_SKETCHER_POINT2"
1375 msgid "GEOM_SKETCHER_DEST"
1376 msgstr "Destination"
1378 msgid "GEOM_SKETCHER_ABS"
1381 msgid "GEOM_SKETCHER_REL"
1384 msgid "GEOM_SKETCHER_SEL"
1387 msgid "GEOM_SKETCHER_ANGLE"
1390 msgid "GEOM_SKETCHER_PER"
1391 msgstr "Perpendicular"
1393 msgid "GEOM_SKETCHER_TAN"
1396 msgid "GEOM_SKETCHER_VXVY"
1399 msgid "GEOM_SKETCHER_LENGTH"
1402 msgid "GEOM_SKETCHER_X"
1405 msgid "GEOM_SKETCHER_Y"
1408 msgid "GEOM_SKETCHER_X2"
1411 msgid "GEOM_SKETCHER_Y2"
1414 msgid "GEOM_SKETCHER_X3"
1417 msgid "GEOM_SKETCHER_Y3"
1420 msgid "GEOM_SKETCHER_DX2"
1423 msgid "GEOM_SKETCHER_DY2"
1426 msgid "GEOM_SKETCHER_VX2"
1429 msgid "GEOM_SKETCHER_VY2"
1432 msgid "GEOM_SKETCHER_LENGTH2"
1435 msgid "GEOM_SKETCHER_ANGLE2"
1438 msgid "GEOM_SKETCHER_RADIUS2"
1441 msgid "GEOM_SKETCHER_UNDO"
1444 msgid "GEOM_SKETCHER_APPLY"
1447 msgid "GEOM_SKETCHER_VALUES"
1450 msgid "GEOM_SKETCHER_TYPE"
1453 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1454 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1456 msgid "GEOM_FILLET_ABORT"
1457 msgstr "Fillet can't be computed with radius %1"
1459 msgid "GEOM_CHAMFER_ABORT"
1460 msgstr "Chamfer can't be computed with %1 and %2"
1462 msgid "GEOM_3_POINTS"
1474 msgid "GEOM_CREATE_COPY"
1475 msgstr "Create a copy"
1477 msgid "GEOM_CREATE_SINGLE_SOLID"
1478 msgstr "Create a single solid"
1483 msgid "GEOM_ERROR_STATUS"
1484 msgstr "Operation status"
1486 msgid "GEOM_ELLIPSE_ERROR_1"
1487 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1492 msgid "GEOM_POLYLINE"
1498 msgid "GEOM_CURVE_TITLE"
1499 msgstr "Curve Construction"
1501 # ShapeProcessDlg.cxx
1502 msgid "GEOM_SHAPEPROCESS_TITLE"
1503 msgstr "Shape Processing"
1508 msgid "GEOM_SELECTED_OBJECTS"
1509 msgstr "Selected objects"
1511 msgid "GEOM_OPERATIONS"
1514 msgid "GEOM_PARAMETERS"
1517 msgid "GEOM_FixShape"
1520 msgid "GEOM_FixFaceSize"
1521 msgstr "FixFaceSize"
1523 msgid "GEOM_DropSmallEdges"
1524 msgstr "DropSmallEdges"
1526 msgid "GEOM_SplitAngle"
1529 msgid "GEOM_SplitClosedFaces"
1530 msgstr "SplitClosedFaces"
1532 msgid "GEOM_SplitContinuity"
1533 msgstr "SplitContinuity"
1535 msgid "GEOM_BSplineRestriction"
1536 msgstr "BSplineRestriction"
1538 msgid "GEOM_ToBezier"
1541 msgid "GEOM_SameParameter"
1542 msgstr "SameParameter"
1544 msgid "GEOM_3D_TOLERANCE"
1545 msgstr "3D tolerance"
1547 msgid "GEOM_MAX_3D_TOLERANCE"
1548 msgstr "Max 3D tolerance"
1550 msgid "GEOM_MAX_TOLERANCE"
1551 msgstr "Max tolerance"
1553 msgid "GEOM_ANGLE_1"
1556 msgid "GEOM_NUM_SPLIT_POINTS"
1557 msgstr "Number of splitting points"
1559 msgid "GEOM_SURFACE_CONTINUTY"
1560 msgstr "Surface continuity"
1562 msgid "GEOM_CURVE_CONTINUTY"
1563 msgstr "Curve continuity"
1565 msgid "GEOM_SURFACE_MODE"
1566 msgstr "Surface mode"
1568 msgid "GEOM_3D_CURVE_MODE"
1569 msgstr "3D curve mode"
1571 msgid "GEOM_2D_CURVE_MODE"
1572 msgstr "2D curve mode"
1574 msgid "GEOM_2D_TOLERANCE"
1575 msgstr "2D tolerance"
1577 msgid "GEOM_REQUIRED_DEGREE"
1578 msgstr "Required degree"
1580 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1581 msgstr "Required number of segments"
1583 msgid "GEOM_3D_CONTINUTY"
1584 msgstr "3D continuity"
1586 msgid "GEOM_2D_CONTINUTY"
1587 msgstr "2D continuity"
1589 msgid "GEOM_CLOSECONTOUR_TITLE"
1590 msgstr "Close contour"
1592 msgid "GEOM_ERR_LIB_NOT_FOUND"
1593 msgstr "GUI library corresponding to the user action can not be found or loaded"
1595 msgid "OperationGUI_ChamferDlg::FACE_1"
1598 msgid "OperationGUI_ChamferDlg::FACE_2"
1601 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1602 msgstr "Selected faces"
1604 msgid "OperationGUI_ChamferDlg::D"
1607 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1608 msgstr "Selected edges"
1610 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1611 msgstr "Selected faces"
1613 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1614 msgstr "Suppress internal wires"
1616 msgid "GEOM_INTERNAL_WIRES"
1617 msgstr "Internal wires"
1619 msgid "GEOM_SELECTED_FACE"
1620 msgstr "Selected face"
1622 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1623 msgstr "Remove all internal wires"
1625 msgid "GEOM_REMOVE_HOLES_TITLE"
1626 msgstr "Suppress holes"
1628 msgid "GEOM_SELECTED_SHAPE"
1629 msgstr "Selected shape"
1631 msgid "GEOM_REMOVE_ALL_HOLES"
1632 msgstr "Remove all holes"
1637 msgid "GEOM_WIRES_TO_REMOVE"
1638 msgstr "Wires to remove"
1643 msgid "GEOM_FREE_BOUNDARIES"
1644 msgstr "Free boundaries"
1646 msgid "GEOM_FREE_FACES"
1649 msgid "GEOM_CHANGE_ORIENTATION_TITLE"
1650 msgstr "Change orientation"
1652 msgid "GEOM_CHANGE_ORIENTATION"
1653 msgstr "Objects to change orientation"
1655 msgid "GEOM_BY_PARAMETER"
1656 msgstr "By parameter"
1658 msgid "GEOM_BY_LENGTH"
1661 msgid "GEOM_DIVIDE_EDGE_TITLE"
1662 msgstr "Addition of point"
1664 msgid "GEOM_ADD_POINT"
1670 msgid "GEOM_MARKER_TITLE"
1671 msgstr "Create marker"
1676 msgid "GEOM_TRIHEDRON"
1679 msgid "GEOM_FREE_BOUNDS_MSG"
1680 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1682 msgid "GEOM_FREE_BOUNDS_ERROR"
1683 msgstr "Object is not selected"
1685 msgid "GEOM_FREE_BOUNDS_TLT"
1686 msgstr "Free boundary detection"
1688 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1689 msgstr "Check free boundaries"
1691 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1692 msgstr "Free boundaries"
1694 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1695 msgstr "Number of closed free boundaries: "
1697 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1698 msgstr "Number of open free boundaries: "
1700 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1701 msgstr "Please, select at least one Shape Process operation to proceed."
1703 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1704 msgstr "Please, select a geometrical object for Shape Processing."
1706 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1707 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1709 msgid "MeasureGUI_PointDlg::POINT"
1712 msgid "MeasureGUI_PointDlg::X"
1715 msgid "MeasureGUI_PointDlg::Y"
1718 msgid "MeasureGUI_PointDlg::Z"
1721 msgid "MeasureGUI_PointDlg::CAPTION"
1722 msgstr "Point Coordinates"
1724 msgid "MeasureGUI_PointDlg::COORDINATES"
1725 msgstr "Point and its coordinates"
1727 msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
1728 msgstr "Check also geometry"
1730 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1731 msgstr "Create Group"
1733 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1736 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1739 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1742 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1743 msgstr "Main Shape And Sub-Shapes"
1745 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1748 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1749 msgstr "Select Sub-Shapes"
1751 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1754 msgid "GroupGUI_GroupDlg::ADD"
1757 msgid "GroupGUI_GroupDlg::REMOVE"
1760 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1763 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1764 msgstr "Please, specify a non-empty group name"
1766 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1767 msgstr "Please, select a main shape"
1769 msgid "GroupGUI_GroupDlg::NO_GROUP"
1770 msgstr "Please, select a group to edit"
1772 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1773 msgstr "Please, select one or more sub-shapes to put into the group"
1775 msgid "GroupGUI::NO_GROUP"
1776 msgstr "Please, select a group to edit"
1783 msgid "WRN_NOT_IMPLEMENTED"
1784 msgstr "Sorry, this functionality is not yet implemented"
1786 ### BlocksGUI_TrsfDlg ###
1788 msgid "BlocksGUI_TrsfDlg::FACE_1"
1791 msgid "BlocksGUI_TrsfDlg::FACE_2"
1794 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1797 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1800 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1803 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1806 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1807 msgstr "Block Multi-Transformation"
1809 msgid "GEOM_BLOCK_MULTITRSF"
1810 msgstr "Block Multi-Transformation"
1812 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1813 msgstr "Multi-Transformation Simple"
1815 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1816 msgstr "Multi-Transformation Double"
1818 ### BlocksGUI_QuadFaceDlg ###
1820 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1823 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1826 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1829 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1832 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1835 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1838 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1841 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1844 msgid "GEOM_QUAD_FACE_TITLE"
1845 msgstr "Quadrangle Face Construction"
1847 msgid "GEOM_QUAD_FACE"
1848 msgstr "Quadrangle Face"
1850 ### BlocksGUI_BlockDlg ###
1852 msgid "BlocksGUI_BlockDlg::FACE_1"
1855 msgid "BlocksGUI_BlockDlg::FACE_2"
1858 msgid "BlocksGUI_BlockDlg::FACE_3"
1861 msgid "BlocksGUI_BlockDlg::FACE_4"
1864 msgid "BlocksGUI_BlockDlg::FACE_5"
1867 msgid "BlocksGUI_BlockDlg::FACE_6"
1870 msgid "GEOM_BLOCK_TITLE"
1871 msgstr "Hexahedral Solid Construction"
1874 msgstr "Hexahedral Solid"
1876 #==============================================================================
1878 msgid "BasicGUI_MarkerDlg::CAPTION"
1879 msgstr "Local CS Construction"
1881 msgid "BasicGUI_MarkerDlg::LOCALCS"
1882 msgstr "Local coordinate system"
1884 msgid "BasicGUI_MarkerDlg::ORIGIN"
1885 msgstr "Coordinates of origin"
1887 msgid "BasicGUI_MarkerDlg::XDIR"
1888 msgstr "X axis direction"
1890 msgid "BasicGUI_MarkerDlg::YDIR"
1891 msgstr "Y axis direction"
1893 msgid "BasicGUI_MarkerDlg::DX"
1896 msgid "BasicGUI_MarkerDlg::DY"
1899 msgid "BasicGUI_MarkerDlg::DZ"
1902 msgid "BasicGUI_MarkerDlg::LCS_NAME"
1905 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
1906 msgstr "Coordinate system axes cannot be parallel"
1938 ### BlocksGUI_ExplodeDlg ###
1940 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
1941 msgstr "Min. nb. faces"
1943 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
1944 msgstr "Max. nb. faces"
1946 msgid "GEOM_BLOCK_EXPLODE_TITLE"
1947 msgstr "Sub Blocks Selection"
1949 msgid "GEOM_BLOCK_EXPLODE"
1952 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
1953 msgstr "There are %1 specified blocks and NO other solids"
1955 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
1956 msgstr "There are %1 specified blocks and some other solids"
1958 msgid "ShHealOper_NotError_msg"
1959 msgstr "Shape Healing algorithm has done no modification of the original shape"
1961 msgid "ShHealOper_InvalidParameters_msg"
1962 msgstr "Incorrect parameters for Shape Healing algorithm"
1964 msgid "ShHealOper_ErrorExecution_msg"
1965 msgstr "Shape Healing algorithm failed"
1967 msgid "GEOM_GLUE_TITLE"
1973 msgid "GEOM_FREE_FACES_TITLE"
1976 ### New object names for RepairGUI ###
1977 msgid "SEWING_NEW_OBJ_NAME"
1980 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
1983 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
1984 msgstr "CloseContour"
1986 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
1987 msgstr "SupressHoles"
1989 msgid "GLUE_NEW_OBJ_NAME"
1992 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
1993 msgstr "RemoveIntWires"
1995 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
1996 msgstr "ProcessShape"
1998 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
1999 msgstr "SupressFaces"
2001 msgid "CHANGE_ORIENTATION_NEW_OBJ_NAME"
2004 msgid "NON_GEOM_OBJECTS_SELECTED"
2005 msgstr "There are objects selected which do not belong to %1 component."
2007 msgid "GEOM_PROPAGATE_TITLE"
2010 msgid "GEOM_PROPAGATE"
2013 ### Menu of GEOM module ###
2018 msgstr "Import geometry from BREP file"
2024 msgstr "Import geometry from BREP file"
2027 msgstr "Export geometry to BREP file"
2033 msgstr "Export geometry to BREP file"
2039 msgstr "Delete object"
2045 msgstr "Delete object"
2047 msgid "MEN_NEW_ENTITY"
2054 msgstr "Create a point"
2060 msgstr "Create a point"
2063 msgstr "Create a line"
2069 msgstr "Create a line"
2072 msgstr "Create a circle"
2078 msgstr "Create a circle"
2081 msgstr "Create an ellipse"
2087 msgstr "Create an ellipse"
2090 msgstr "Create an arc"
2096 msgstr "Create an arc"
2099 msgstr "Create a curve"
2105 msgstr "Create a curve"
2108 msgstr "Create a vector"
2114 msgstr "Create a vector"
2117 msgstr "Create a plane"
2123 msgstr "Create a plane"
2125 msgid "TOP_WORK_PLANE"
2126 msgstr "Create a working plane"
2128 msgid "MEN_WORK_PLANE"
2129 msgstr "Working plane"
2131 msgid "STB_WORK_PLANE"
2132 msgstr "Create a working plane"
2134 msgid "TOP_LOCAL_CS"
2135 msgstr "Create a local coordinate system"
2137 msgid "MEN_LOCAL_CS"
2138 msgstr "Local coordinate system"
2140 msgid "STB_LOCAL_CS"
2141 msgstr "Create a local coordinate system"
2143 msgid "MEN_PRIMITIVES"
2147 msgstr "Create a box"
2153 msgstr "Create a box"
2155 msgid "TOP_CYLINDER"
2156 msgstr "Create a cylinder"
2158 msgid "MEN_CYLINDER"
2161 msgid "STB_CYLINDER"
2162 msgstr "Create a cylinder"
2165 msgstr "Create a sphere"
2171 msgstr "Create a sphere"
2174 msgstr "Create a torus"
2180 msgstr "Create a torus"
2183 msgstr "Create a cone"
2189 msgstr "Create a cone"
2191 msgid "MEN_GENERATION"
2194 msgid "TOP_EXTRUSION"
2195 msgstr "Create an extrusion"
2197 msgid "MEN_EXTRUSION"
2200 msgid "STB_EXTRUSION"
2201 msgstr "Create an extrusion"
2203 msgid "TOP_REVOLUTION"
2204 msgstr "Create a revolution"
2206 msgid "MEN_REVOLUTION"
2209 msgid "STB_REVOLUTION"
2210 msgstr "Create a revolution"
2213 msgstr "Create a filling"
2219 msgstr "Create a filling"
2222 msgstr "Extrusion along a path"
2225 msgstr "Extrusion along a path"
2228 msgstr "Create a shape by Extrusion along a path"
2233 msgid "TOP_GROUP_CREATE"
2234 msgstr "Create a group"
2236 msgid "MEN_GROUP_CREATE"
2239 msgid "STB_GROUP_CREATE"
2240 msgstr "Create a group"
2242 msgid "TOP_GROUP_EDIT"
2243 msgstr "Edit a group"
2245 msgid "MEN_GROUP_EDIT"
2248 msgid "STB_GROUP_EDIT"
2249 msgstr "Edit a group"
2255 msgstr "Quadrangle Face"
2258 msgstr "Quadrangle Face"
2261 msgstr "Quadrangle Face"
2263 msgid "TOP_HEX_SOLID"
2264 msgstr "Hexahedral Solid"
2266 msgid "MEN_HEX_SOLID"
2267 msgstr "Hexahedral Solid"
2269 msgid "STB_HEX_SOLID"
2270 msgstr "Hexahedral Solid"
2294 msgstr "Build an edge"
2300 msgstr "Build an edge"
2303 msgstr "Build a wire"
2309 msgstr "Build a wire"
2312 msgstr "Build a face"
2318 msgstr "Build a face"
2321 msgstr "Build a shell"
2327 msgstr "Build a shell"
2330 msgstr "Build a solid"
2336 msgstr "Build a solid"
2338 msgid "TOP_COMPOUND"
2339 msgstr "Build a compound"
2341 msgid "MEN_COMPOUND"
2344 msgid "STB_COMPOUND"
2345 msgstr "Build a compound"
2347 msgid "MEN_OPERATIONS"
2389 msgid "MEN_TRANSFORMATION"
2390 msgstr "Transformation"
2392 msgid "TOP_TRANSLATION"
2393 msgstr "Translation"
2395 msgid "MEN_TRANSLATION"
2396 msgstr "Translation"
2398 msgid "STB_TRANSLATION"
2399 msgstr "Translation"
2401 msgid "TOP_ROTATION"
2404 msgid "MEN_ROTATION"
2407 msgid "STB_ROTATION"
2410 msgid "TOP_MODIFY_LOCATION"
2411 msgstr "Modify the Location"
2413 msgid "MEN_MODIFY_LOCATION"
2414 msgstr "Modify the Location"
2416 msgid "STB_MODIFY_LOCATION"
2417 msgstr "Modify the Location"
2420 msgstr "Mirror image"
2423 msgstr "Mirror image"
2426 msgstr "Mirror image"
2429 msgstr "Scale transform"
2432 msgstr "Scale transform"
2435 msgstr "Scale transform"
2438 msgstr "Offset surface"
2441 msgstr "Offset surface"
2444 msgstr "Offset surface"
2446 msgid "TOP_MUL_TRANSLATION"
2447 msgstr "Multi-Translation"
2449 msgid "MEN_MUL_TRANSLATION"
2450 msgstr "Multi-Translation"
2452 msgid "STB_MUL_TRANSLATION"
2453 msgstr "Multi-Translation"
2455 msgid "TOP_MUL_ROTATION"
2456 msgstr "Multi-Rotation"
2458 msgid "MEN_MUL_ROTATION"
2459 msgstr "Multi-Rotation"
2461 msgid "STB_MUL_ROTATION"
2462 msgstr "Multi-Rotation"
2464 msgid "TOP_PARTITION"
2467 msgid "MEN_PARTITION"
2470 msgid "STB_PARTITION"
2473 msgid "TOP_ARCHIMEDE"
2476 msgid "MEN_ARCHIMEDE"
2479 msgid "STB_ARCHIMEDE"
2500 msgid "TOP_CLIPPING"
2501 msgstr "Clipping range"
2503 msgid "MEN_CLIPPING"
2504 msgstr "Clipping range"
2506 msgid "STB_CLIPPING"
2507 msgstr "Clipping range"
2509 msgid "TOP_MUL_TRANSFORM"
2510 msgstr "Multi-transformation"
2512 msgid "MEN_MUL_TRANSFORM"
2513 msgstr "Multi-transformation"
2515 msgid "STB_MUL_TRANSFORM"
2516 msgstr "Multi-transformation"
2518 msgid "TOP_EXPLODE_BLOCKS"
2519 msgstr "Explode on Blocks"
2521 msgid "MEN_EXPLODE_BLOCKS"
2522 msgstr "Explode on Blocks"
2524 msgid "STB_EXPLODE_BLOCKS"
2525 msgstr "Explode on Blocks"
2527 msgid "TOP_PROPAGATE"
2530 msgid "MEN_PROPAGATE"
2533 msgid "STB_PROPAGATE"
2539 msgid "TOP_SHAPE_PROCESS"
2540 msgstr "Perform shape processing"
2542 msgid "MEN_SHAPE_PROCESS"
2543 msgstr "Shape processing"
2545 msgid "STB_SHAPE_PROCESS"
2546 msgstr "Perform shape processing "
2548 msgid "TOP_SUPPRESS_FACES"
2549 msgstr "Perform suppress faces"
2551 msgid "MEN_SUPPRESS_FACES"
2552 msgstr "Suppress faces"
2554 msgid "STB_SUPPRESS_FACES"
2555 msgstr "Perform suppress faces"
2557 msgid "TOP_CLOSE_CONTOUR"
2558 msgstr "Perform close contour"
2560 msgid "MEN_CLOSE_CONTOUR"
2561 msgstr "Close contour"
2563 msgid "STB_CLOSE_CONTOUR"
2564 msgstr "Perform close contour"
2566 msgid "TOP_SUPPRESS_INT_WIRES"
2567 msgstr "Perform suppress internal wires"
2569 msgid "MEN_SUPPRESS_INT_WIRES"
2570 msgstr "Suppress internal wires"
2572 msgid "STB_SUPPRESS_INT_WIRES"
2573 msgstr "Perform suppress internal wires"
2575 msgid "TOP_SUPPERSS_HOLES"
2576 msgstr "Perform suppress holes"
2578 msgid "MEN_SUPPERSS_HOLES"
2579 msgstr "Suppress holes"
2581 msgid "STB_SUPPERSS_HOLES"
2582 msgstr "Perform suppress holes"
2585 msgstr "Perform sewing"
2591 msgstr "Perform sewing"
2593 msgid "TOP_GLUE_FACES"
2594 msgstr "Perform glue faces"
2596 msgid "MEN_GLUE_FACES"
2599 msgid "STB_GLUE_FACES"
2600 msgstr "Perform glue faces"
2602 msgid "TOP_POINT_ON_EDGE"
2603 msgstr "Add point on edge"
2605 msgid "MEN_POINT_ON_EDGE"
2606 msgstr "Add point on edge"
2608 msgid "STB_POINT_ON_EDGE"
2609 msgstr "Add point on edge"
2611 msgid "TOP_CHECK_FREE_BNDS"
2612 msgstr "Check free boundaries"
2614 msgid "MEN_CHECK_FREE_BNDS"
2615 msgstr "Check free boundaries"
2617 msgid "STB_CHECK_FREE_BNDS"
2618 msgstr "Check free boundaries"
2620 msgid "TOP_CHECK_FREE_FACES"
2621 msgstr "Check free faces"
2623 msgid "MEN_CHECK_FREE_FACES"
2624 msgstr "Check free faces"
2626 msgid "STB_CHECK_FREE_FACES"
2627 msgstr "Check free faces"
2629 msgid "TOP_CHANGE_ORIENTATION"
2630 msgstr "Change orientation"
2632 msgid "MEN_CHANGE_ORIENTATION"
2633 msgstr "Change orientation"
2635 msgid "STB_CHANGE_ORIENTATION"
2636 msgstr "Change orientation"
2638 msgid "MEN_MEASURES"
2641 msgid "TOP_POINT_COORDS"
2642 msgstr "Point coordinates"
2644 msgid "MEN_POINT_COORDS"
2645 msgstr "Point coordinates"
2647 msgid "STB_POINT_COORDS"
2648 msgstr "Point coordinates"
2650 msgid "TOP_BASIC_PROPS"
2651 msgstr "Basic properties"
2653 msgid "MEN_BASIC_PROPS"
2654 msgstr "Basic properties"
2656 msgid "STB_BASIC_PROPS"
2657 msgstr "Basic properties"
2659 msgid "TOP_MASS_CENTER"
2660 msgstr "Compute center of mass"
2662 msgid "MEN_MASS_CENTER"
2663 msgstr "Center of mass"
2665 msgid "STB_MASS_CENTER"
2666 msgstr "Compute center of mass"
2669 msgstr "Compute intertia"
2675 msgstr "Compute intertia"
2677 msgid "MEN_DIMENSIONS"
2681 msgstr "Compute bounding box"
2684 msgstr "Bounding box"
2687 msgstr "Compute bounding box"
2689 msgid "TOP_MIN_DIST"
2690 msgstr "Compute minimum distance"
2692 msgid "MEN_MIN_DIST"
2693 msgstr "Min distance"
2695 msgid "STB_MIN_DIST"
2696 msgstr "Compute minimum distance"
2698 msgid "TOP_TOLERANCE"
2699 msgstr "Compute tolerance"
2701 msgid "MEN_TOLERANCE"
2702 msgstr "Compute tolerance"
2704 msgid "STB_TOLERANCE"
2705 msgstr "Compute tolerance"
2725 msgid "TOP_CHECK_COMPOUND"
2726 msgstr "Check compound of blocks"
2728 msgid "MEN_CHECK_COMPOUND"
2729 msgstr "Check compound of blocks"
2731 msgid "STB_CHECK_COMPOUND"
2732 msgstr "Check compound of blocks"
2737 msgid "TOP_CHECK_GEOMETRY"
2738 msgstr "Check Geometry"
2740 msgid "MEN_CHECK_GEOMETRY"
2741 msgstr "Check Geometry"
2743 msgid "STB_CHECK_GEOMETRY"
2744 msgstr "Check Geometry"
2746 msgid "MEN_PREFERENCES"
2747 msgstr "Preferences"
2749 msgid "MEN_PREFERENCES_GEOM"
2752 msgid "TOP_SHADING_COLOR"
2753 msgstr "Set shading color"
2755 msgid "MEN_SHADING_COLOR"
2756 msgstr "Shading color"
2758 msgid "STB_SHADING_COLOR"
2759 msgstr "Set shading color"
2762 msgstr "Set number of isolines"
2768 msgstr "Set number of isolines"
2770 msgid "TOP_STEP_VALUE"
2771 msgstr "Set step value"
2773 msgid "MEN_STEP_VALUE"
2776 msgid "STB_STEP_VALUE"
2777 msgstr "Set step value"
2782 msgid "MEN_DISPLAY_MODE"
2783 msgstr "Display mode"
2791 msgid "MEN_WIREFRAME"
2797 msgid "TOP_DISPLAY_ALL"
2798 msgstr "Display all"
2800 msgid "MEN_DISPLAY_ALL"
2801 msgstr "Display all"
2803 msgid "STB_DISPLAY_ALL"
2804 msgstr "Display all"
2806 msgid "TOP_ERASE_ALL"
2809 msgid "MEN_ERASE_ALL"
2812 msgid "STB_ERASE_ALL"
2824 msgid "TOP_DISPLAY_ONLY"
2825 msgstr "Display only"
2827 msgid "MEN_DISPLAY_ONLY"
2828 msgstr "Display only"
2830 msgid "STB_DISPLAY_ONLY"
2831 msgstr "Display only"
2842 msgid "TOP_POP_RENAME"
2845 msgid "MEN_POP_RENAME"
2848 msgid "STB_POP_RENAME"
2851 msgid "TOP_POP_WIREFRAME"
2854 msgid "MEN_POP_WIREFRAME"
2857 msgid "STB_POP_WIREFRAME"
2860 msgid "TOP_POP_SHADING"
2863 msgid "MEN_POP_SHADING"
2866 msgid "STB_POP_SHADING"
2869 msgid "TOP_POP_COLOR"
2872 msgid "MEN_POP_COLOR"
2875 msgid "STB_POP_COLOR"
2878 msgid "TOP_POP_TRANSPARENCY"
2879 msgstr "Transparency"
2881 msgid "MEN_POP_TRANSPARENCY"
2882 msgstr "Transparency"
2884 msgid "STB_POP_TRANSPARENCY"
2885 msgstr "Transparency"
2887 msgid "TOP_POP_ISOS"
2890 msgid "MEN_POP_ISOS"
2893 msgid "STB_POP_ISOS"
2896 msgid "TOP_POP_CREATE_GROUP"
2897 msgstr "Create Group"
2899 msgid "MEN_POP_CREATE_GROUP"
2900 msgstr "Create Group"
2902 msgid "STB_POP_CREATE_GROUP"
2903 msgstr "Create Group"
2908 msgid "TOOL_PRIMITIVES"
2911 msgid "TOOL_BOOLEAN"
2912 msgstr "Boolean operations"
2914 msgid "TOOL_GENERATION"
2917 msgid "TOOL_TRANSFORMATION"
2918 msgstr "Transformation"
2926 msgid "GEOM_ERR_GET_ENGINE"
2927 msgstr "Failed to obtain GEOM Engine component. Reload Geometry module and try again."
2929 msgid "PREF_GROUP_OCCVIEWER"
2930 msgstr "OCC Viewer 3d"
2932 msgid "PREF_GROUP_GENERAL"
2935 msgid "PREF_SHADING_COLOR"
2936 msgstr "Default shading color"
2938 msgid "PREF_WIREFRAME_COLOR"
2939 msgstr "Default wireframe color"
2941 msgid "PREF_FREE_BOUND_COLOR"
2942 msgstr "Color of free boundaries"
2944 msgid "PREF_LINE_COLOR"
2945 msgstr "Color of edges, vectors, wires"
2947 msgid "PREF_POINT_COLOR"
2948 msgstr "Color of points"
2950 msgid "PREF_ISOS_COLOR"
2951 msgstr "Color of isolines"
2953 msgid "PREF_STEP_VALUE"
2954 msgstr "Step value for spin boxes"
2956 msgid "PREF_DISPLAY_MODE"
2957 msgstr "Default display mode"
2959 msgid "PREF_TAB_SETTINGS"
2962 msgid "ERROR_SHAPE_TYPE"
2963 msgstr "Object of incorrect type selected!\nPlease, select face, shell or solid and try again"
2966 msgstr "Selected object has been used to create another one\n It can't be deleted "