1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: 2008-03-12 12:26+0300\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
65 msgid "GEOM_BUT_EXPLODE"
68 #NOT_FOUND_ANY error from some operations
70 msgstr "Not a single entity has been found"
73 #==============================================================================
76 #: GeometryGUI.cxx:563
77 msgid "GEOM_INF_LOADED"
78 msgstr "File %1 loaded."
81 #==============================================================================
84 #: GeometryGUI.cxx:3069
85 msgid "GEOM_PRP_COMMAND"
86 msgstr "No command associated with this id = %1."
88 #: GeometryGUI.cxx:4977
89 msgid "GEOM_PRP_ABORT"
90 msgstr "Operation aborted"
92 #: GeometryGUI.cxx:5058
94 msgstr "Operation done"
96 #: GeometryGUI.cxx:3717
97 msgid "GEOM_PRP_LOADING"
98 msgstr "Loading %1 ..."
100 #: GeometryGUI.cxx:1412
101 msgid "GEOM_PRP_NULLSHAPE"
102 msgstr "Error, null or inappropriate shape !"
104 #: GeometryGUI.cxx:5072
105 msgid "GEOM_PRP_READY"
108 #: GeometryGUI.cxx:1690
109 msgid "GEOM_PRP_SELECT_SUBSHAPES"
110 msgstr "Select Sub Shapes"
112 msgid "GEOM_PRP_EXPORT"
113 msgstr "Exporting geometry to %1 ..."
116 msgstr "Confirm operation"
118 msgid "GEOM_CONFIRM_INFO"
119 msgstr "Shape contains %1 sub shapes !"
122 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
123 msgstr "Not allowed in VTK viewer"
125 #: GeometryGUI.cxx:1690
126 msgid "GEOM_PRP_SHAPE_IN_STUDY"
127 msgstr "Main shape must be in the study before"
129 #: GeometryGUI.cxx:1690
130 msgid "GEOM_PRP_SELECT_EDGE"
131 msgstr "Select edges and click on Apply"
133 #: GeometryGUI.cxx:1690
134 msgid "GEOM_PRP_SELECT_FACE"
135 msgstr "Select faces to suppress and click on Ok/Apply"
137 #: GeometryGUI.cxx:1690
138 msgid "GEOM_PRP_SELECT_FIRST"
139 msgstr "Select main shape first"
141 #: GeometryGUI.cxx:1690
142 msgid "GEOM_PRP_MIN_DIST"
143 msgstr "Min Distance not computed"
145 msgid "GEOM_STUDY_LOCKED"
146 msgstr "The active study is locked and therefore cannot be modified"
149 #==============================================================================
152 #: GeometryGUI.cxx:3698
153 msgid "GEOM_MEN_ALL_FILES"
154 msgstr "All Files ( * )"
156 #: GeometryGUI.cxx:4389
157 msgid "GEOM_MEN_ANGLE"
160 #: GeometryGUI.cxx:3941
161 msgid "GEOM_MEN_COMPONENT"
164 #: GeometryGUI.cxx:4389
165 msgid "GEOM_MEN_ENTER_ANGLE"
166 msgstr "Enter An Angle In Degrees"
168 #: GeometryGUI.cxx:3758
169 msgid "GEOM_MEN_EXPORT"
172 #: GeometryGUI.cxx:3648
173 msgid "GEOM_MEN_IMPORT"
176 #: GeometryGUI.cxx:2931
177 msgid "GEOM_MEN_ISOS"
178 msgstr "Select Number Of Isos"
180 #: GeometryGUI.cxx:4278
181 msgid "GEOM_MEN_POPUP_NAME"
184 #: GeometryGUI.cxx:4414
185 msgid "GEOM_MEN_SKETCHER_X"
186 msgstr "Enter a length to set X"
188 #: GeometryGUI.cxx:4438
189 msgid "GEOM_MEN_SKETCHER_Y"
190 msgstr "Enter a length to set Y"
192 #: GeometryGUI.cxx:2898
193 msgid "GEOM_MEN_TRANSPARENCY"
194 msgstr "Transparency"
196 #: GeometryGUI.cxx:4413
200 #: GeometryGUI.cxx:4437
204 #: GeometryGUI_NbIsosDlg.cxx:36
205 msgid "GEOM_MEN_ISOU"
208 #: GeometryGUI_NbIsosDlg.cxx:53
209 msgid "GEOM_MEN_ISOV"
212 #: GeometryGUI_TransparencyDlg.cxx:31
213 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
214 msgstr "Transparency :"
216 msgid "GEOM_MEN_STEP_LABEL"
219 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
220 msgstr "Identical names : select by mouse !"
222 msgid "GEOM_NAME_INCORRECT"
223 msgstr "Object name not found"
225 msgid "GEOM_INCORRECT_INPUT"
226 msgstr "Incorrect input data!"
229 #==============================================================================
232 #: GeometryGUI.cxx:892
233 msgid "GEOM_WRN_RADIUS_NULL"
234 msgstr "Radius is null"
236 #: GeometryGUI.cxx:3854
237 msgid "GEOM_WRN_WARNING"
240 #: GeometryGUI.cxx:3854
241 msgid "GEOM_REALLY_DELETE"
242 msgstr "Do you really want to delete this %1 object(s):"
244 msgid "GEOM_DELETE_OBJECTS"
245 msgstr "Delete objects"
248 #==============================================================================
256 msgid "GEOM_MAIN_OBJECT"
260 msgid "GEOM_TOOL_OBJECT"
264 msgid "GEOM_BASE_OBJECT"
268 msgid "GEOM_PATH_OBJECT"
276 msgid "GEOM_OBJECT_I"
280 msgid "GEOM_OBJECT_RESULT"
281 msgstr "Object And Result"
288 msgid "GEOM_BASE_POINT"
292 msgid "GEOM_CENTER_POINT"
293 msgstr "Center Point"
296 msgid "GEOM_DIAGONAL_POINTS"
297 msgstr "Diagonal Points"
300 msgid "GEOM_CENTRAL_POINT"
301 msgstr "Central Point"
316 msgid "GEOM_ARGUMENTS"
328 msgid "GEOM_CONSTANT_RADIUS"
340 msgid "GEOM_RADIUS_I"
356 msgid "GEOM_COORDINATES"
369 msgstr "Both Directions"
372 msgid "GEOM_REVERSE_U"
376 msgid "GEOM_REVERSE_V"
392 msgid "GEOM_VECTOR_LENGTH"
393 msgstr "Vector Length :"
396 msgid "GEOM_REVERSE_VECTOR"
397 msgstr "Reverse Vector"
400 msgid "GEOM_POINT_MIRROR"
401 msgstr "Point Mirror"
404 msgid "GEOM_AXE_MIRROR"
408 msgid "GEOM_PLANE_MIRROR"
409 msgstr "Plane Mirror"
412 msgid "GEOM_FACE_SELECTION"
413 msgstr "Face Selection"
420 msgid "GEOM_WATER_DENSITY"
421 msgstr "Water Density :"
424 msgid "GEOM_MESHING_DEFLECTION"
425 msgstr "Meshing Deflect. :"
428 msgid "GEOM_DIMENSIONS"
432 msgid "GEOM_PRECISION"
436 msgid "GEOM_SELECTION"
440 msgid "GEOM_NB_TIMES"
444 msgid "GEOM_NB_TIMES_U"
445 msgstr "Nb. Times U :"
448 msgid "GEOM_NB_TIMES_V"
449 msgstr "Nb. Times V :"
464 #==============================================================================
468 msgid "GEOM_PARTITION"
471 #Half-space partition
472 msgid "GEOM_PARTITION_HALFSPACE"
473 msgstr "Half-space partition"
476 msgid "GEOM_TOLERANCE"
480 msgid "GEOM_ORIENTATION"
488 msgid "GEOM_REVOLUTION"
492 msgid "GEOM_ROTATION"
496 msgid "GEOM_ARCHIMEDE"
508 msgid "GEOM_DISTANCE"
524 msgid "GEOM_POSITION"
540 msgid "GEOM_TRANSLATION"
545 msgstr "Working Plane"
552 msgid "GEOM_EXTRUSION"
556 msgid "GEOM_SUB_SHAPE"
560 msgid "GEOM_SUPRESSFACE"
561 msgstr "Supress Face"
572 msgid "GEOM_CHECK_SHAPE"
575 #Check Blocks Compound
576 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
577 msgstr "Check and Improve Blocks Compound"
579 #Check Blocks Compound Errors
580 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
583 #Check Blocks Compound Errors
584 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
585 msgstr "The Compound of Blocks has no errors"
587 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
588 msgstr "The Compound of Blocks has errors"
590 #Check Blocks Compound SubShapes
591 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
592 msgstr "Incriminated Sub-Shapes"
600 msgstr "Bounding Box"
604 msgstr "Center Of Mass"
608 msgstr "Normal To A Face"
610 msgid "GEOM_VECTOR_NORMALE"
611 msgstr "Vector_Normal"
614 msgid "GEOM_PROPERTIES"
615 msgstr "Basic Properties"
618 msgid "GEOM_MULTITRANSLATION"
619 msgstr "Multi-Translation"
622 msgid "GEOM_MULTIROTATION"
623 msgstr "Multi-Rotation"
626 #==============================================================================
645 msgid "GEOM_ELLIPSE_TITLE"
646 msgstr "Ellipse Construction"
649 msgid "GEOM_RADIUS_MAJOR"
650 msgstr "Major radius :"
653 msgid "GEOM_RADIUS_MINOR"
654 msgstr "Minor radius :"
657 msgid "GEOM_COMPOUND"
661 msgid "GEOM_BLOCKS_COMPOUND"
662 msgstr "BlocksCompound"
665 msgid "GEOM_COMPOUNDSOLID"
673 msgid "GEOM_CYLINDER"
689 msgid "GEOM_FACE_OR_LCS"
729 msgid "GEOM_SURFCONE"
730 msgstr "Conical Face"
733 msgid "GEOM_SURFCYLINDER"
734 msgstr "Cylindrical Face"
737 msgid "GEOM_SURFSPHERE"
738 msgstr "Spherical Face"
741 msgid "GEOM_SURFTORUS"
742 msgstr "Toroidal Face"
753 msgid "GEOM_VECTOR_U"
757 msgid "GEOM_VECTOR_V"
777 msgstr "Imported_Shape"
780 msgid "GEOM_PARAMETER"
784 #==============================================================================
832 #==============================================================================
836 msgid "GEOM_STEP_TITLE"
837 msgstr "Step value for GUI constructions"
839 #: GeometryGUI_ArcDlg.cxx:45
840 msgid "GEOM_ARC_TITLE"
841 msgstr "Arc Construction"
843 #: GeometryGUI_ArchimedeDlg.cxx:55
844 msgid "GEOM_ARCHIMEDE_TITLE"
845 msgstr "Archimede Construction"
847 #: GeometryGUI_BndBoxDlg.cxx:59
848 msgid "GEOM_BNDBOX_TITLE"
849 msgstr "Bounding Box Informations"
851 #: GeometryGUI_BndBoxDlg.cxx:82
852 msgid "GEOM_BNDBOX_OBJDIM"
853 msgstr "Object And Its Dimensions"
855 #: GeometryGUI_BoxDlg.cxx:50
856 msgid "GEOM_BOX_TITLE"
857 msgstr "Box Construction"
859 #: GeometryGUI_BoxDlg.cxx:50
861 msgstr "Dimensions At Origin"
863 #: GeometryGUI_ChamferDlg.cxx:58
864 msgid "GEOM_CHAMFER_TITLE"
865 msgstr "Chamfer Construction"
867 #: GeometryGUI_ChamferDlg.cxx:58
868 msgid "GEOM_CHAMFER_ALL"
869 msgstr "Chamfer On Whole Shape"
871 #: GeometryGUI_ChamferDlg.cxx:58
872 msgid "GEOM_CHAMFER_EDGES"
873 msgstr "Chamfer On Edges From Shape"
875 #: GeometryGUI_ChamferDlg.cxx:58
876 msgid "GEOM_CHAMFER_EDGE"
877 msgstr "Chamfer On Selected Edges"
879 #: GeometryGUI_ChamferDlg.cxx:58
880 msgid "SELECTED_EDGE"
881 msgstr "Selected Edges"
883 #: GeometryGUI_ChamferDlg.cxx:58
884 msgid "GEOM_CHAMFER_FACES"
885 msgstr "Chamfer On Faces From Shape"
887 #: GeometryGUI_CircleDlg.cxx:48
888 msgid "GEOM_CIRCLE_TITLE"
889 msgstr "Circle Construction"
891 #: GeometryGUI_CenterMassDlg.cxx:77
892 msgid "GEOM_CMASS_TITLE"
893 msgstr "Center Of Mass Construction"
895 #: GeometryGUI_NormaleDlg.cxx:57
896 msgid "GEOM_NORMALE_TITLE"
897 msgstr "Create Normal To A Face"
899 msgid "GEOM_PLANE_SIZE"
900 msgstr "Size of plane :"
902 #: GeometryGUI_CommonDlg.cxx:47
903 msgid "GEOM_COMMON_TITLE"
904 msgstr "BOOLEAN : Common Of Two Objects"
906 #: GeometryGUI_CompoundDlg.cxx:44
907 msgid "GEOM_COMPOUND_TITLE"
908 msgstr "Create A Compound"
910 #: GeometryGUI_ConeDlg.cxx:49
911 msgid "GEOM_CONE_TITLE"
912 msgstr "Cone Construction"
914 #: GeometryGUI_CutDlg.cxx:48
915 msgid "GEOM_CUT_TITLE"
916 msgstr "BOOLEAN : Cut Of Two Objects"
918 #: GeometryGUI_CylinderDlg.cxx:47
919 msgid "GEOM_CYLINDER_TITLE"
920 msgstr "Cylinder Construction"
922 #: GeometryGUI_CheckShape.cxx:60
923 msgid "GEOM_CHECK_TITLE"
924 msgstr "Check Shape Informations"
926 #: GeometryGUI_CheckShape.cxx:83
927 msgid "GEOM_CHECK_INFOS"
928 msgstr "Object And Its Topological Informations"
930 #: GeometryGUI_DistanceDlg.cxx:57
931 msgid "GEOM_MINDIST_TITLE"
932 msgstr "Minimun Distance Between Two Objects"
934 #: GeometryGUI_DistanceDlg.cxx:57
935 msgid "GEOM_MINDIST_OBJ"
936 msgstr "Objects And Results"
938 #: GeometryGUI_AngleDlg.cxx:82
939 msgid "GEOM_MEASURE_ANGLE_TITLE"
940 msgstr "Angle Between Two Straight Edges/Lines/Vectors"
942 #: GeometryGUI_AngleDlg.cxx:86
943 msgid "GEOM_MEASURE_ANGLE_ANGLE"
946 #: GeometryGUI_AngleDlg.cxx:90
947 msgid "GEOM_MEASURE_ANGLE_OBJ"
948 msgstr "Objects And Results"
950 #: GeometryGUI_AngleDlg.cxx:93
951 msgid "GEOM_MEASURE_ANGLE_IS"
952 msgstr "Angle in degrees :"
954 #: GeometryGUI_EdgeDlg.cxx:47
955 msgid "GEOM_EDGE_TITLE"
956 msgstr "Create An Edge"
958 #: GeometryGUI_FilletDlg.cxx:58
959 msgid "GEOM_FILLET_TITLE"
960 msgstr "Fillet Construction"
962 #: GeometryGUI_FilletDlg.cxx:58
963 msgid "GEOM_FILLET_ALL"
964 msgstr "Fillet On Whole Shape"
966 #: GeometryGUI_FilletDlg.cxx:58
967 msgid "GEOM_FILLET_EDGES"
968 msgstr "Fillet On Edges From Shape"
970 #: GeometryGUI_FilletDlg.cxx:58
971 msgid "GEOM_FILLET_FACES"
972 msgstr "Fillet On Faces From Shape"
974 #: GeometryGUI_FaceDlg.cxx:49
975 msgid "GEOM_FACE_TITLE"
976 msgstr "Create A Face"
978 #: GeometryGUI_FaceDlg.cxx:78
979 msgid "GEOM_FACE_FFW"
980 msgstr "Face creation from wires and/or edges"
982 #: GeometryGUI_FaceDlg.cxx:103
983 msgid "GEOM_FACE_OPT"
984 msgstr "Try to create a planar face"
986 #: GeometryGUI_FillingDlg.cxx:53
987 msgid "GEOM_FILLING_TITLE"
988 msgstr "Filling Surface With Edges"
990 #: GeometryGUI_FillingDlg.cxx:112
991 msgid "GEOM_FILLING_ARG"
992 msgstr "Arguments And Parameters"
994 #: GeometryGUI_FillingDlg.cxx:128
995 msgid "GEOM_FILLING_MIN_DEG"
998 #: GeometryGUI_FillingDlg.cxx:142
999 msgid "GEOM_FILLING_MAX_DEG"
1002 #: GeometryGUI_FillingDlg.cxx:150
1003 msgid "GEOM_FILLING_TOL_2D"
1006 #: GeometryGUI_FillingDlg.cxx:170
1007 msgid "GEOM_FILLING_COMPOUND"
1008 msgstr "Edges compound"
1010 #: GeometryGUI_FillingDlg.cxx:184
1011 msgid "GEOM_FILLING_TOL_3D"
1014 #: GeometryGUI_FillingDlg.cxx:192
1015 msgid "GEOM_FILLING_NB_ITER"
1018 #: GeometryGUI_FuseDlg.cxx:48
1019 msgid "GEOM_FUSE_TITLE"
1020 msgstr "BOOLEAN : Fuse Two Objects"
1022 #: GeometryGUI_InertiaDlg.cxx:42
1023 msgid "GEOM_INERTIA_TITLE"
1024 msgstr "Calculs Of Inertia"
1026 #: GeometryGUI_InertiaDlg.cxx:50
1027 msgid "GEOM_INERTIA_CONSTR"
1028 msgstr "Matrix And Moments Of Inertia"
1030 #: GeometryGUI_InertiaDlg.cxx:100
1031 msgid "GEOM_INERTIA_I"
1034 #: GeometryGUI_InertiaDlg.cxx:182
1035 msgid "GEOM_INERTIA_IXYZ"
1036 msgstr "IX & IY & IZ :"
1038 #: GeometryGUI_LineDlg.cxx:50
1039 msgid "GEOM_LINE_TITLE"
1040 msgstr "Line Construction"
1042 #: GeometryGUI_MaxToleranceDlg.cxx:53
1043 msgid "GEOM_TOLERANCE_TITLE"
1044 msgstr "Maximum Tolerance"
1046 #: GeometryGUI_MaxToleranceDlg.cxx:84
1047 msgid "GEOM_TOLERANCE_CONSTR"
1048 msgstr "Object And Its Tolerances"
1050 #: GeometryGUI_MaxToleranceDlg.cxx:121
1051 msgid "GEOM_TOLERANCE_FACE"
1054 #: GeometryGUI_MaxToleranceDlg.cxx:138
1055 msgid "GEOM_TOLERANCE_EDGE"
1058 #: GeometryGUI_MaxToleranceDlg.cxx:155
1059 msgid "GEOM_TOLERANCE_VERTEX"
1062 #: GeometryGUI_MirrorDlg.cxx:52
1063 msgid "GEOM_MIRROR_TITLE"
1064 msgstr "Mirror An Object"
1066 #: GeometryGUI_OrientationDlg.cxx:46
1067 msgid "GEOM_ORIENTATION_TITLE"
1068 msgstr "Change Orientation"
1070 #: GeometryGUI_OrientationDlg.cxx:134
1071 msgid "GEOM_ORIENTATION_OPT"
1072 msgstr "Reverse orientation with normal vectors simulation"
1074 #: GeometryGUI_PartitionDlg.cxx:45
1075 msgid "GEOM_PARTITION_TITLE"
1076 msgstr "Partition Of Object With Tool"
1078 #: GeometryGUI_PartitionDlg.cxx:45
1079 msgid "GEOM_KEEP_OBJECT"
1080 msgstr "Keep Object"
1082 #: GeometryGUI_PartitionDlg.cxx:45
1083 msgid "GEOM_PARTITION_ORIENTATION"
1084 msgstr "Change Orientation"
1086 #: GeometryGUI_PartitionDlg.cxx:45
1087 msgid "SUPPRESS_RESULT"
1088 msgstr "Suppress Result"
1090 msgid "GEOM_REMOVE_WEBS"
1091 msgstr "Remove webs"
1093 msgid "GEOM_SET_MATERIALS"
1094 msgstr "Set materials"
1096 #: OperationGUI_MaterialDlg.cxx:45
1097 msgid "GEOM_MATERIAL_TITLE"
1098 msgstr "Define materials for Dominant Fuse"
1100 msgid "GEOM_MATERIAL_SHAPE"
1103 msgid "GEOM_MATERIAL_MATERIAL"
1106 msgid "GEOM_MATERIAL_ID"
1107 msgstr "Material ID:"
1109 msgid "GEOM_MATERIAL_SET"
1112 #: GeometryGUI_PipeDlg.cxx:47
1113 msgid "GEOM_PIPE_TITLE"
1114 msgstr "Pipe Construction"
1116 #: GeometryGUI_PointDlg.cxx:52
1117 msgid "GEOM_POINT_TITLE"
1118 msgstr "Point Construction"
1120 #: GeometryGUI_PlaneDlg.cxx:60
1121 msgid "GEOM_PLANE_TITLE"
1122 msgstr "Plane Construction"
1124 #: GeometryGUI_PlaneDlg.cxx:172
1125 msgid "GEOM_PLANE_PVC"
1126 msgstr "Point + Coordinate Vector"
1128 #: GeometryGUI_PlaneDlg.cxx:133
1129 msgid "GEOM_PLANE_PV"
1130 msgstr "Point + Vector"
1132 #: GeometryGUI_PrismDlg.cxx:54
1133 msgid "GEOM_EXTRUSION_TITLE"
1134 msgstr "Construction by Extrusion"
1136 #: GeometryGUI_PrismDlg.cxx:83
1137 msgid "GEOM_EXTRUSION_BSV"
1138 msgstr "Base Shape + Vector"
1140 msgid "GEOM_EXTRUSION_BSV_2P"
1141 msgstr "Base Shape + 2 Points"
1143 #: GeometryGUI_PropertiesDlg.cxx:56
1144 msgid "GEOM_PROPERTIES_TITLE"
1145 msgstr "Basic Properties Informations"
1147 #: GeometryGUI_PropertiesDlg.cxx:78
1148 msgid "GEOM_PROPERTIES_CONSTR"
1149 msgstr "Object And Its Properties"
1151 #: GeometryGUI_PropertiesDlg.cxx:114
1152 msgid "GEOM_PROPERTIES_SURFACE"
1153 msgstr "Surface is :"
1155 #: GeometryGUI_PropertiesDlg.cxx:120
1156 msgid "GEOM_PROPERTIES_VOLUME"
1157 msgstr "Volume is :"
1159 #: GeometryGUI_RevolDlg.cxx:49
1160 msgid "GEOM_REVOLUTION_TITLE"
1161 msgstr "Construction By Revolution"
1163 #: GeometryGUI_RotationDlg.cxx:51
1164 msgid "GEOM_ROTATION_TITLE"
1165 msgstr "Rotation Of An Object"
1167 #: GeometryGUI_ScaleDlg.cxx:52
1168 msgid "GEOM_SCALE_TITLE"
1169 msgstr "Scale An Object"
1171 #: GeometryGUI_PositionDlg.cxx:52
1172 msgid "GEOM_POSITION_TITLE"
1173 msgstr "Modify the Location of an Object"
1175 #: GeometryGUI_PositionDlg.cxx:52
1176 msgid "GEOM_START_LCS"
1179 #: GeometryGUI_PositionDlg.cxx:52
1180 msgid "GEOM_END_LCS"
1183 #: GeometryGUI_OffsetDlg.cxx:53
1184 msgid "GEOM_OFFSET_TITLE"
1185 msgstr "Offset Surface"
1187 #: GeometryGUI_ScaleDlg.cxx:117
1188 msgid "GEOM_SCALE_FACTOR"
1189 msgstr "Scale Factor :"
1191 #: GeometryGUI_SectionDlg.cxx:50
1192 msgid "GEOM_SECTION_TITLE"
1193 msgstr "BOOLEAN : Section Of Two Objects"
1195 #: GeometryGUI_SewingDlg.cxx:48
1196 msgid "GEOM_SEWING_TITLE"
1197 msgstr "Topological sewing"
1199 #: GeometryGUI_ShellDlg.cxx:53
1200 msgid "GEOM_SHELL_TITLE"
1201 msgstr "Shell Construction"
1203 #: GeometryGUI_SolidDlg.cxx:74
1204 msgid "GEOM_SOLID_TITLE"
1205 msgstr "Solid Construction"
1207 #: GeometryGUI_SphereDlg.cxx:50
1208 msgid "GEOM_SPHERE_TITLE"
1209 msgstr "Sphere Construction"
1211 #: GeometryGUI_SphereDlg.cxx:113
1212 msgid "GEOM_SPHERE_CR"
1213 msgstr "Center + Radius"
1215 #: GeometryGUI_SphereDlg.cxx:146
1216 msgid "GEOM_SPHERE_RO"
1217 msgstr "Radius At Origin"
1219 #: GeometryGUI_SubShapeDlg.cxx:55
1220 msgid "GEOM_SUBSHAPE_TITLE"
1221 msgstr "Sub Shapes Selection"
1223 #: GeometryGUI_SubShapeDlg.cxx:131
1224 msgid "GEOM_SUBSHAPE_TYPE"
1225 msgstr "Sub Shapes Type :"
1227 #: GeometryGUI_SubShapeDlg.cxx:137
1228 msgid "GEOM_SUBSHAPE_SELECT"
1229 msgstr "Select Sub Shapes"
1231 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1232 msgstr "Please, select one or more sub-shapes"
1234 #: GeometryGUI_TorusDlg.cxx:51
1235 msgid "GEOM_TORUS_TITLE"
1236 msgstr "Torus Construction"
1238 #: GeometryGUI_SuppressFacesDlg.cxx:103
1239 msgid "GEOM_SUPRESSFACE_TITLE"
1240 msgstr "Suppress Faces In An Object"
1242 #: GeometryGUI_SuppressFacesDlg.cxx:164
1243 msgid "GEOM_SUPRESSFACE_SELECT"
1244 msgstr "Select Faces To Suppress"
1246 #: GeometryGUI_TranslationDlg.cxx:78
1247 msgid "GEOM_TRANSLATION_COOR"
1248 msgstr "Translation With Coordinates"
1250 msgid "GEOM_TRANSPARENCY_TITLE"
1251 msgstr "Transparency"
1253 msgid "GEOM_TRANSPARENCY_OPAQUE"
1256 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1257 msgstr "Transparent"
1259 msgid "GEOM_SUPPRESSHOLE_TITLE"
1260 msgstr "Suppress holes"
1262 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1263 msgstr "Select the face with hole"
1265 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1266 msgstr "Select wire on face"
1268 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1269 msgstr "Select end face (if hole traversing)"
1271 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1272 msgstr "Select end wire (if hole traversing)"
1274 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1275 msgstr "Face or shell"
1277 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1278 msgstr "Select hole(s) on the face"
1280 #: GeometryGUI_TranslationDlg.cxx:56
1281 msgid "GEOM_TRANSLATION_TITLE"
1282 msgstr "Translation Of An Object"
1284 #: GeometryGUI_VectorDlg.cxx:54
1285 msgid "GEOM_VECTOR_TITLE"
1286 msgstr "Vector Construction"
1288 #: GeometryGUI_WhatisDlg.cxx:63
1289 msgid "GEOM_WHATIS_TITLE"
1290 msgstr "Whatis Informations"
1292 #: GeometryGUI_WhatisDlg.cxx:86
1293 msgid "GEOM_WHATIS_OBJECT"
1294 msgstr "Object And Its Topological Informations"
1296 #: GeometryGUI_WireDlg.cxx:46
1297 msgid "GEOM_WIRE_TITLE"
1298 msgstr "Create A Wire"
1300 #: GeometryGUI_WireDlg.cxx:103
1301 msgid "GEOM_WIRE_CONNECT"
1302 msgstr "Wire creation from wires/edges connected"
1304 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1305 msgid "GEOM_WPLANE_TITLE"
1306 msgstr "Working Plane Selection"
1308 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1309 msgid "GEOM_WPLANE_FACE"
1310 msgstr "Plane, Planar Face or LCS"
1312 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1313 msgid "GEOM_WPLANE_VECTOR"
1314 msgstr "Select 2 vectors"
1316 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1317 msgid "GEOM_WPLANE_VX"
1320 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1321 msgid "GEOM_WPLANE_VZ"
1324 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1325 msgid "GEOM_WPLANE_ORIGIN"
1326 msgstr "Select a plane"
1328 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1329 msgid "GEOM_WPLANE_OYZ"
1332 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1333 msgid "GEOM_WPLANE_OZX"
1336 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1337 msgid "GEOM_WPLANE_OXY"
1340 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1341 msgid "GEOM_REVERSE_PLANE"
1342 msgstr "Reverse the plane normal"
1344 #: GeometryGUI_multiTranslationDlg.cxx:107
1345 msgid "GEOM_MULTITRANSLATION_TITLE"
1346 msgstr "Multi-Translation"
1348 #: GeometryGUI_multiTranslationDlg.cxx:107
1349 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1350 msgstr "Multi Translation Simple"
1352 #: GeometryGUI_multiTranslationDlg.cxx:107
1353 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1354 msgstr "Multi Translation Double"
1356 #: GeometryGUI_multiRotationDlg.cxx:107
1357 msgid "GEOM_MULTIROTATION_TITLE"
1358 msgstr "Multi-Rotation"
1360 #: GeometryGUI_multiRotationDlg.cxx:107
1361 msgid "GEOM_MULTIROTATION_SIMPLE"
1362 msgstr "Multi Rotation Simple"
1364 #: GeometryGUI_multiRotationDlg.cxx:107
1365 msgid "GEOM_MULTIROTATION_DOUBLE"
1366 msgstr "Multi Rotation Double"
1368 msgid "GEOM_PARAM_POINT"
1369 msgstr "Parametric point"
1371 msgid "GEOM_REF_POINT"
1372 msgstr "Point with reference"
1374 msgid "GEOM_LINE_INTERSECTION"
1375 msgstr "Point On Lines Intersection"
1378 #==============================================================================
1381 #: GeometryGUI.cxx:4613
1382 msgid "GEOM_MEN_WIREFRAME"
1385 #: GeometryGUI.cxx:4613
1386 msgid "GEOM_MEN_SHADING"
1389 msgid "GEOM_RECONSTRUCTION_LIMIT"
1390 msgstr "Reconstruction Limit"
1392 msgid "GEOM_KEEP_NONLIMIT_SHAPES"
1393 msgstr "Keep nonlimit shapes"
1395 msgid "GEOM_SUPPRESS_RESULT"
1396 msgstr "Suppress Result"
1398 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1401 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1404 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1406 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1408 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1410 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1412 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1414 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1416 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1419 msgid "GEOM_SPLINE_TITLE"
1420 msgstr "Spline Construction"
1425 msgid "GEOM_INTERPOL"
1426 msgstr "Interpolation"
1429 #==============================================================================
1432 msgid "GEOM_SKETCHER_EL"
1433 msgstr "Element Type"
1435 msgid "GEOM_BUT_CLOSE_SKETCH"
1436 msgstr "Sketch Closure"
1438 msgid "GEOM_BUT_END_SKETCH"
1439 msgstr "Sketch Validation"
1441 msgid "GEOM_SKETCHER_TITLE"
1442 msgstr "Sketch Construction"
1444 msgid "GEOM_SKETCHER_POINT"
1447 msgid "GEOM_SKETCHER_SEGMENT"
1450 msgid "GEOM_SKETCHER_ARC"
1453 msgid "GEOM_SKETCHER_DIR"
1456 msgid "GEOM_SKETCHER_POINT2"
1459 msgid "GEOM_SKETCHER_DEST"
1460 msgstr "Destination"
1462 msgid "GEOM_SKETCHER_ABS"
1465 msgid "GEOM_SKETCHER_REL"
1468 msgid "GEOM_SKETCHER_SEL"
1471 msgid "GEOM_SKETCHER_ANGLE"
1474 msgid "GEOM_SKETCHER_PER"
1475 msgstr "Perpendicular"
1477 msgid "GEOM_SKETCHER_TAN"
1480 msgid "GEOM_SKETCHER_VXVY"
1483 msgid "GEOM_SKETCHER_LENGTH"
1486 msgid "GEOM_SKETCHER_X"
1489 msgid "GEOM_SKETCHER_Y"
1492 msgid "GEOM_SKETCHER_X2"
1495 msgid "GEOM_SKETCHER_Y2"
1498 msgid "GEOM_SKETCHER_X3"
1501 msgid "GEOM_SKETCHER_Y3"
1504 msgid "GEOM_SKETCHER_DX2"
1507 msgid "GEOM_SKETCHER_DY2"
1510 msgid "GEOM_SKETCHER_VX2"
1513 msgid "GEOM_SKETCHER_VY2"
1516 msgid "GEOM_SKETCHER_LENGTH2"
1519 msgid "GEOM_SKETCHER_ANGLE2"
1522 msgid "GEOM_SKETCHER_RADIUS2"
1525 msgid "GEOM_SKETCHER_UNDO"
1528 msgid "GEOM_SKETCHER_APPLY"
1531 msgid "GEOM_SKETCHER_VALUES"
1534 msgid "GEOM_SKETCHER_TYPE"
1537 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1538 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1540 msgid "GEOM_FILLET_ABORT"
1541 msgstr "Fillet can't be computed with radius %1"
1543 msgid "GEOM_CHAMFER_ABORT"
1544 msgstr "Chamfer can't be computed with %1 and %2"
1546 msgid "GEOM_3_POINTS"
1549 msgid "GEOM_CENTER_2POINTS"
1550 msgstr "Center and two points"
1561 msgid "GEOM_CREATE_COPY"
1562 msgstr "Create a copy"
1564 msgid "GEOM_CREATE_SINGLE_SOLID"
1565 msgstr "Create a single solid"
1570 msgid "GEOM_ERROR_STATUS"
1571 msgstr "Operation status"
1573 msgid "GEOM_ELLIPSE_ERROR_1"
1574 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1579 msgid "GEOM_POLYLINE"
1585 msgid "GEOM_CURVE_TITLE"
1586 msgstr "Curve Construction"
1588 # ShapeProcessDlg.cxx
1589 msgid "GEOM_SHAPEPROCESS_TITLE"
1590 msgstr "Shape Processing"
1595 msgid "GEOM_SELECTED_OBJECTS"
1596 msgstr "Selected objects"
1598 msgid "GEOM_OPERATIONS"
1601 msgid "GEOM_PARAMETERS"
1604 msgid "GEOM_FixShape"
1607 msgid "GEOM_FixFaceSize"
1608 msgstr "FixFaceSize"
1610 msgid "GEOM_DropSmallEdges"
1611 msgstr "DropSmallEdges"
1613 msgid "GEOM_SplitAngle"
1616 msgid "GEOM_SplitClosedFaces"
1617 msgstr "SplitClosedFaces"
1619 msgid "GEOM_SplitContinuity"
1620 msgstr "SplitContinuity"
1622 msgid "GEOM_BSplineRestriction"
1623 msgstr "BSplineRestriction"
1625 msgid "GEOM_ToBezier"
1628 msgid "GEOM_SameParameter"
1629 msgstr "SameParameter"
1631 msgid "GEOM_3D_TOLERANCE"
1632 msgstr "3D tolerance"
1634 msgid "GEOM_MAX_3D_TOLERANCE"
1635 msgstr "Max 3D tolerance"
1637 msgid "GEOM_MAX_TOLERANCE"
1638 msgstr "Max tolerance"
1640 msgid "GEOM_ANGLE_1"
1643 msgid "GEOM_NUM_SPLIT_POINTS"
1644 msgstr "Number of splitting points"
1646 msgid "GEOM_SURFACE_CONTINUTY"
1647 msgstr "Surface continuity"
1649 msgid "GEOM_CURVE_CONTINUTY"
1650 msgstr "Curve continuity"
1652 msgid "GEOM_SURFACE_MODE"
1653 msgstr "Surface mode"
1655 msgid "GEOM_3D_CURVE_MODE"
1656 msgstr "3D curve mode"
1658 msgid "GEOM_2D_CURVE_MODE"
1659 msgstr "2D curve mode"
1661 msgid "GEOM_2D_TOLERANCE"
1662 msgstr "2D tolerance"
1664 msgid "GEOM_REQUIRED_DEGREE"
1665 msgstr "Required degree"
1667 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1668 msgstr "Required number of segments"
1670 msgid "GEOM_3D_CONTINUTY"
1671 msgstr "3D continuity"
1673 msgid "GEOM_2D_CONTINUTY"
1674 msgstr "2D continuity"
1676 msgid "GEOM_CLOSECONTOUR_TITLE"
1677 msgstr "Close contour"
1679 msgid "GEOM_ERR_LIB_NOT_FOUND"
1680 msgstr "GUI library corresponding to the user action can not be found or loaded"
1682 msgid "OperationGUI_ChamferDlg::FACE_1"
1685 msgid "OperationGUI_ChamferDlg::FACE_2"
1688 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1689 msgstr "Selected faces"
1691 msgid "OperationGUI_ChamferDlg::D"
1694 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1695 msgstr "Selected edges"
1697 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1698 msgstr "Selected faces"
1700 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1701 msgstr "Suppress internal wires"
1703 msgid "GEOM_INTERNAL_WIRES"
1704 msgstr "Internal wires"
1706 msgid "GEOM_SELECTED_FACE"
1707 msgstr "Selected face"
1709 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1710 msgstr "Remove all internal wires"
1712 msgid "GEOM_REMOVE_HOLES_TITLE"
1713 msgstr "Suppress holes"
1715 msgid "GEOM_SELECTED_SHAPE"
1716 msgstr "Selected shape"
1718 msgid "GEOM_REMOVE_ALL_HOLES"
1719 msgstr "Remove all holes"
1724 msgid "GEOM_WIRES_TO_REMOVE"
1725 msgstr "Wires to remove"
1730 msgid "GEOM_FREE_BOUNDARIES"
1731 msgstr "Free boundaries"
1733 msgid "GEOM_FREE_FACES"
1736 msgid "GEOM_CHANGE_ORIENTATION_TITLE"
1737 msgstr "Change orientation"
1739 msgid "GEOM_CHANGE_ORIENTATION"
1740 msgstr "Objects to change orientation"
1742 msgid "GEOM_REMOVE_EXTRA_EDGES_TITLE"
1743 msgstr "Remove extra edges"
1745 msgid "GEOM_REMOVE_EXTRA_EDGES"
1746 msgstr "Object to remove extra edges"
1748 msgid "GEOM_BY_PARAMETER"
1749 msgstr "By parameter"
1751 msgid "GEOM_BY_LENGTH"
1754 msgid "GEOM_DIVIDE_EDGE_TITLE"
1755 msgstr "Addition of point"
1757 msgid "GEOM_ADD_POINT"
1763 msgid "GEOM_MARKER_TITLE"
1764 msgstr "Create marker"
1769 msgid "GEOM_TRIHEDRON"
1772 msgid "GEOM_FREE_BOUNDS_MSG"
1773 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1775 msgid "GEOM_FREE_BOUNDS_ERROR"
1776 msgstr "Object is not selected"
1778 msgid "GEOM_FREE_BOUNDS_TLT"
1779 msgstr "Free boundary detection"
1781 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1782 msgstr "Check free boundaries"
1784 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1785 msgstr "Free boundaries"
1787 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1788 msgstr "Number of closed free boundaries: "
1790 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1791 msgstr "Number of open free boundaries: "
1793 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1794 msgstr "Please, select at least one Shape Process operation to proceed."
1796 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1797 msgstr "Please, select a geometrical object for Shape Processing."
1799 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1800 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1802 msgid "MeasureGUI_PointDlg::POINT"
1805 msgid "MeasureGUI_PointDlg::X"
1808 msgid "MeasureGUI_PointDlg::Y"
1811 msgid "MeasureGUI_PointDlg::Z"
1814 msgid "MeasureGUI_PointDlg::CAPTION"
1815 msgstr "Point Coordinates"
1817 msgid "MeasureGUI_PointDlg::COORDINATES"
1818 msgstr "Point and its coordinates"
1820 msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
1821 msgstr "Check also geometry"
1823 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1824 msgstr "Create Group"
1826 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1829 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1832 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1835 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1836 msgstr "Main Shape And Sub-Shapes"
1838 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1841 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1842 msgstr "Select Sub-Shapes"
1844 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1847 msgid "GroupGUI_GroupDlg::ADD"
1850 msgid "GroupGUI_GroupDlg::REMOVE"
1853 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1856 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1857 msgstr "Please, specify a non-empty group name"
1859 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1860 msgstr "Please, select a main shape"
1862 msgid "GroupGUI_GroupDlg::NO_GROUP"
1863 msgstr "Please, select a group to edit"
1865 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1866 msgstr "Please, select one or more sub-shapes to put into the group"
1868 msgid "GroupGUI::NO_GROUP"
1869 msgstr "Please, select a group to edit"
1876 msgid "WRN_NOT_IMPLEMENTED"
1877 msgstr "Sorry, this functionality is not yet implemented"
1879 ### BlocksGUI_TrsfDlg ###
1881 msgid "BlocksGUI_TrsfDlg::FACE_1"
1884 msgid "BlocksGUI_TrsfDlg::FACE_2"
1887 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1890 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1893 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1896 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1899 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1900 msgstr "Block Multi-Transformation"
1902 msgid "GEOM_BLOCK_MULTITRSF"
1903 msgstr "Block Multi-Transformation"
1905 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1906 msgstr "Multi-Transformation Simple"
1908 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1909 msgstr "Multi-Transformation Double"
1911 ### BlocksGUI_QuadFaceDlg ###
1913 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1916 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1919 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1922 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1925 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1928 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1931 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1934 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1937 msgid "GEOM_QUAD_FACE_TITLE"
1938 msgstr "Quadrangle Face Construction"
1940 msgid "GEOM_QUAD_FACE"
1941 msgstr "Quadrangle Face"
1943 ### BlocksGUI_BlockDlg ###
1945 msgid "BlocksGUI_BlockDlg::FACE_1"
1948 msgid "BlocksGUI_BlockDlg::FACE_2"
1951 msgid "BlocksGUI_BlockDlg::FACE_3"
1954 msgid "BlocksGUI_BlockDlg::FACE_4"
1957 msgid "BlocksGUI_BlockDlg::FACE_5"
1960 msgid "BlocksGUI_BlockDlg::FACE_6"
1963 msgid "GEOM_BLOCK_TITLE"
1964 msgstr "Hexahedral Solid Construction"
1967 msgstr "Hexahedral Solid"
1969 #==============================================================================
1971 msgid "BasicGUI_MarkerDlg::CAPTION"
1972 msgstr "Local CS Construction"
1974 msgid "BasicGUI_MarkerDlg::LOCALCS"
1975 msgstr "Local coordinate system"
1977 msgid "BasicGUI_MarkerDlg::ORIGIN"
1978 msgstr "Coordinates of origin"
1980 msgid "BasicGUI_MarkerDlg::XDIR"
1981 msgstr "X axis direction"
1983 msgid "BasicGUI_MarkerDlg::YDIR"
1984 msgstr "Y axis direction"
1986 msgid "BasicGUI_MarkerDlg::DX"
1989 msgid "BasicGUI_MarkerDlg::DY"
1992 msgid "BasicGUI_MarkerDlg::DZ"
1995 msgid "BasicGUI_MarkerDlg::LCS_NAME"
1998 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
1999 msgstr "Coordinate system axes cannot be parallel"
2031 ### BlocksGUI_ExplodeDlg ###
2033 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
2034 msgstr "Min. nb. faces"
2036 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
2037 msgstr "Max. nb. faces"
2039 msgid "GEOM_BLOCK_EXPLODE_TITLE"
2040 msgstr "Sub Blocks Selection"
2042 msgid "GEOM_BLOCK_EXPLODE"
2045 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
2046 msgstr "There are %1 specified blocks and NO other solids"
2048 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
2049 msgstr "There are %1 specified blocks and some other solids"
2051 msgid "ShHealOper_NotError_msg"
2052 msgstr "Shape Healing algorithm has done no modification of the original shape"
2054 msgid "ShHealOper_InvalidParameters_msg"
2055 msgstr "Incorrect parameters for Shape Healing algorithm"
2057 msgid "ShHealOper_ErrorExecution_msg"
2058 msgstr "Shape Healing algorithm failed"
2060 msgid "GEOM_GLUE_TITLE"
2066 msgid "RepairGUI_GlueDlg::SELECT_FACES"
2067 msgstr "Select Faces"
2069 msgid "RepairGUI_GlueDlg::FACES_FOR_GLUING_ARE_DETECTED"
2070 msgstr "There are %1 face(s) that can be glued. They are coloured on the screen with red colour\nPlease close this message box and select faces for glueing"
2072 msgid "RepairGUI_GlueDlg::GLUE_FACES"
2075 msgid "RepairGUI_GlueDlg::THERE_ARE_NO_FACES_FOR_GLUING"
2076 msgstr "There are no faces for gluing"
2078 msgid "GEOM_FREE_FACES_TITLE"
2081 ### New object names for RepairGUI ###
2082 msgid "SEWING_NEW_OBJ_NAME"
2085 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
2088 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
2089 msgstr "CloseContour"
2091 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
2092 msgstr "SupressHoles"
2094 msgid "GLUE_NEW_OBJ_NAME"
2097 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
2098 msgstr "RemoveIntWires"
2100 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
2101 msgstr "ProcessShape"
2103 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
2104 msgstr "SupressFaces"
2106 msgid "CHANGE_ORIENTATION_NEW_OBJ_NAME"
2109 msgid "REMOVE_EXTRA_EDGES_NEW_OBJ_NAME"
2110 msgstr "NoExtraEdges"
2112 msgid "NON_GEOM_OBJECTS_SELECTED"
2113 msgstr "There are objects selected which do not belong to %1 component."
2115 msgid "GEOM_PROPAGATE_TITLE"
2118 msgid "GEOM_PROPAGATE"
2121 ### Menu of GEOM module ###
2126 msgstr "Import geometry from BREP file"
2132 msgstr "Import geometry from BREP file"
2135 msgstr "Export geometry to BREP file"
2141 msgstr "Export geometry to BREP file"
2147 msgstr "Delete object"
2153 msgstr "Delete object"
2155 msgid "MEN_NEW_ENTITY"
2162 msgstr "Create a point"
2168 msgstr "Create a point"
2171 msgstr "Create a line"
2177 msgstr "Create a line"
2180 msgstr "Create a circle"
2186 msgstr "Create a circle"
2189 msgstr "Create an ellipse"
2195 msgstr "Create an ellipse"
2198 msgstr "Create an arc"
2204 msgstr "Create an arc"
2207 msgstr "Create a curve"
2213 msgstr "Create a curve"
2216 msgstr "Create a vector"
2222 msgstr "Create a vector"
2225 msgstr "Create a plane"
2231 msgstr "Create a plane"
2233 msgid "TOP_WORK_PLANE"
2234 msgstr "Create a working plane"
2236 msgid "MEN_WORK_PLANE"
2237 msgstr "Working plane"
2239 msgid "STB_WORK_PLANE"
2240 msgstr "Create a working plane"
2242 msgid "TOP_LOCAL_CS"
2243 msgstr "Create a local coordinate system"
2245 msgid "MEN_LOCAL_CS"
2246 msgstr "Local coordinate system"
2248 msgid "STB_LOCAL_CS"
2249 msgstr "Create a local coordinate system"
2251 msgid "MEN_PRIMITIVES"
2255 msgstr "Create a box"
2261 msgstr "Create a box"
2263 msgid "TOP_CYLINDER"
2264 msgstr "Create a cylinder"
2266 msgid "MEN_CYLINDER"
2269 msgid "STB_CYLINDER"
2270 msgstr "Create a cylinder"
2273 msgstr "Create a sphere"
2279 msgstr "Create a sphere"
2282 msgstr "Create a torus"
2288 msgstr "Create a torus"
2291 msgstr "Create a cone"
2297 msgstr "Create a cone"
2299 msgid "MEN_GENERATION"
2302 msgid "TOP_EXTRUSION"
2303 msgstr "Create an extrusion"
2305 msgid "MEN_EXTRUSION"
2308 msgid "STB_EXTRUSION"
2309 msgstr "Create an extrusion"
2311 msgid "TOP_REVOLUTION"
2312 msgstr "Create a revolution"
2314 msgid "MEN_REVOLUTION"
2317 msgid "STB_REVOLUTION"
2318 msgstr "Create a revolution"
2321 msgstr "Create a filling"
2327 msgstr "Create a filling"
2330 msgstr "Extrusion along a path"
2333 msgstr "Extrusion along a path"
2336 msgstr "Create a shape by Extrusion along a path"
2341 msgid "TOP_GROUP_CREATE"
2342 msgstr "Create a group"
2344 msgid "MEN_GROUP_CREATE"
2347 msgid "STB_GROUP_CREATE"
2348 msgstr "Create a group"
2350 msgid "TOP_GROUP_EDIT"
2351 msgstr "Edit a group"
2353 msgid "MEN_GROUP_EDIT"
2356 msgid "STB_GROUP_EDIT"
2357 msgstr "Edit a group"
2363 msgstr "Quadrangle Face"
2366 msgstr "Quadrangle Face"
2369 msgstr "Quadrangle Face"
2371 msgid "TOP_HEX_SOLID"
2372 msgstr "Hexahedral Solid"
2374 msgid "MEN_HEX_SOLID"
2375 msgstr "Hexahedral Solid"
2377 msgid "STB_HEX_SOLID"
2378 msgstr "Hexahedral Solid"
2402 msgstr "Build an edge"
2408 msgstr "Build an edge"
2411 msgstr "Build a wire"
2417 msgstr "Build a wire"
2420 msgstr "Build a face"
2426 msgstr "Build a face from wires and/or edges"
2429 msgstr "Build a shell"
2435 msgstr "Build a shell"
2438 msgstr "Build a solid"
2444 msgstr "Build a solid"
2446 msgid "TOP_COMPOUND"
2447 msgstr "Build a compound"
2449 msgid "MEN_COMPOUND"
2452 msgid "STB_COMPOUND"
2453 msgstr "Build a compound"
2455 msgid "MEN_OPERATIONS"
2497 msgid "MEN_TRANSFORMATION"
2498 msgstr "Transformation"
2500 msgid "TOP_TRANSLATION"
2501 msgstr "Translation"
2503 msgid "MEN_TRANSLATION"
2504 msgstr "Translation"
2506 msgid "STB_TRANSLATION"
2507 msgstr "Translation"
2509 msgid "TOP_ROTATION"
2512 msgid "MEN_ROTATION"
2515 msgid "STB_ROTATION"
2518 msgid "TOP_MODIFY_LOCATION"
2519 msgstr "Modify the Location"
2521 msgid "MEN_MODIFY_LOCATION"
2522 msgstr "Modify the Location"
2524 msgid "STB_MODIFY_LOCATION"
2525 msgstr "Modify the Location"
2528 msgstr "Mirror image"
2531 msgstr "Mirror image"
2534 msgstr "Mirror image"
2537 msgstr "Scale transform"
2540 msgstr "Scale transform"
2543 msgstr "Scale transform"
2546 msgstr "Offset surface"
2549 msgstr "Offset surface"
2552 msgstr "Offset surface"
2554 msgid "TOP_MUL_TRANSLATION"
2555 msgstr "Multi-Translation"
2557 msgid "MEN_MUL_TRANSLATION"
2558 msgstr "Multi-Translation"
2560 msgid "STB_MUL_TRANSLATION"
2561 msgstr "Multi-Translation"
2563 msgid "TOP_MUL_ROTATION"
2564 msgstr "Multi-Rotation"
2566 msgid "MEN_MUL_ROTATION"
2567 msgstr "Multi-Rotation"
2569 msgid "STB_MUL_ROTATION"
2570 msgstr "Multi-Rotation"
2572 msgid "TOP_PARTITION"
2575 msgid "MEN_PARTITION"
2578 msgid "STB_PARTITION"
2581 msgid "TOP_ARCHIMEDE"
2584 msgid "MEN_ARCHIMEDE"
2587 msgid "STB_ARCHIMEDE"
2608 msgid "TOP_CLIPPING"
2609 msgstr "Clipping range"
2611 msgid "MEN_CLIPPING"
2612 msgstr "Clipping range"
2614 msgid "STB_CLIPPING"
2615 msgstr "Clipping range"
2617 msgid "TOP_MUL_TRANSFORM"
2618 msgstr "Multi-transformation"
2620 msgid "MEN_MUL_TRANSFORM"
2621 msgstr "Multi-transformation"
2623 msgid "STB_MUL_TRANSFORM"
2624 msgstr "Multi-transformation"
2626 msgid "TOP_EXPLODE_BLOCKS"
2627 msgstr "Explode on Blocks"
2629 msgid "MEN_EXPLODE_BLOCKS"
2630 msgstr "Explode on Blocks"
2632 msgid "STB_EXPLODE_BLOCKS"
2633 msgstr "Explode on Blocks"
2635 msgid "TOP_PROPAGATE"
2638 msgid "MEN_PROPAGATE"
2641 msgid "STB_PROPAGATE"
2647 msgid "TOP_SHAPE_PROCESS"
2648 msgstr "Perform shape processing"
2650 msgid "MEN_SHAPE_PROCESS"
2651 msgstr "Shape processing"
2653 msgid "STB_SHAPE_PROCESS"
2654 msgstr "Perform shape processing "
2656 msgid "TOP_SUPPRESS_FACES"
2657 msgstr "Perform suppress faces"
2659 msgid "MEN_SUPPRESS_FACES"
2660 msgstr "Suppress faces"
2662 msgid "STB_SUPPRESS_FACES"
2663 msgstr "Perform suppress faces"
2665 msgid "TOP_CLOSE_CONTOUR"
2666 msgstr "Perform close contour"
2668 msgid "MEN_CLOSE_CONTOUR"
2669 msgstr "Close contour"
2671 msgid "STB_CLOSE_CONTOUR"
2672 msgstr "Perform close contour"
2674 msgid "TOP_SUPPRESS_INT_WIRES"
2675 msgstr "Perform suppress internal wires"
2677 msgid "MEN_SUPPRESS_INT_WIRES"
2678 msgstr "Suppress internal wires"
2680 msgid "STB_SUPPRESS_INT_WIRES"
2681 msgstr "Perform suppress internal wires"
2683 msgid "TOP_SUPPERSS_HOLES"
2684 msgstr "Perform suppress holes"
2686 msgid "MEN_SUPPERSS_HOLES"
2687 msgstr "Suppress holes"
2689 msgid "STB_SUPPERSS_HOLES"
2690 msgstr "Perform suppress holes"
2693 msgstr "Perform sewing"
2699 msgstr "Perform sewing"
2701 msgid "TOP_GLUE_FACES"
2702 msgstr "Perform glue faces"
2704 msgid "MEN_GLUE_FACES"
2707 msgid "STB_GLUE_FACES"
2708 msgstr "Perform glue faces"
2710 msgid "TOP_POINT_ON_EDGE"
2711 msgstr "Add point on edge"
2713 msgid "MEN_POINT_ON_EDGE"
2714 msgstr "Add point on edge"
2716 msgid "STB_POINT_ON_EDGE"
2717 msgstr "Add point on edge"
2719 msgid "TOP_CHECK_FREE_BNDS"
2720 msgstr "Check free boundaries"
2722 msgid "MEN_CHECK_FREE_BNDS"
2723 msgstr "Check free boundaries"
2725 msgid "STB_CHECK_FREE_BNDS"
2726 msgstr "Check free boundaries"
2728 msgid "TOP_CHECK_FREE_FACES"
2729 msgstr "Check free faces"
2731 msgid "MEN_CHECK_FREE_FACES"
2732 msgstr "Check free faces"
2734 msgid "STB_CHECK_FREE_FACES"
2735 msgstr "Check free faces"
2737 msgid "TOP_CHANGE_ORIENTATION"
2738 msgstr "Change orientation"
2740 msgid "MEN_CHANGE_ORIENTATION"
2741 msgstr "Change orientation"
2743 msgid "STB_CHANGE_ORIENTATION"
2744 msgstr "Change orientation"
2746 msgid "TOP_REMOVE_EXTRA_EDGES"
2747 msgstr "Remove extra edges"
2749 msgid "MEN_REMOVE_EXTRA_EDGES"
2750 msgstr "Remove extra edges"
2752 msgid "STB_REMOVE_EXTRA_EDGES"
2753 msgstr "Remove extra edges"
2755 msgid "MEN_MEASURES"
2758 msgid "TOP_POINT_COORDS"
2759 msgstr "Point coordinates"
2761 msgid "MEN_POINT_COORDS"
2762 msgstr "Point coordinates"
2764 msgid "STB_POINT_COORDS"
2765 msgstr "Point coordinates"
2767 msgid "TOP_BASIC_PROPS"
2768 msgstr "Basic properties"
2770 msgid "MEN_BASIC_PROPS"
2771 msgstr "Basic properties"
2773 msgid "STB_BASIC_PROPS"
2774 msgstr "Basic properties"
2776 msgid "TOP_MASS_CENTER"
2777 msgstr "Compute center of mass"
2779 msgid "MEN_MASS_CENTER"
2780 msgstr "Center of mass"
2782 msgid "STB_MASS_CENTER"
2783 msgstr "Compute center of mass"
2786 msgstr "Compute normal to a face"
2789 msgstr "Normal to a face"
2792 msgstr "Compute normal to a face in a point (optional)"
2795 msgstr "Compute intertia"
2801 msgstr "Compute intertia"
2803 msgid "MEN_DIMENSIONS"
2807 msgstr "Compute bounding box"
2810 msgstr "Bounding box"
2813 msgstr "Compute bounding box"
2815 msgid "TOP_MIN_DIST"
2816 msgstr "Compute minimum distance"
2818 msgid "MEN_MIN_DIST"
2819 msgstr "Min distance"
2821 msgid "STB_MIN_DIST"
2822 msgstr "Compute minimum distance"
2824 msgid "TOP_MEASURE_ANGLE"
2825 msgstr "Compute angle"
2827 msgid "MEN_MEASURE_ANGLE"
2830 msgid "STB_MEASURE_ANGLE"
2831 msgstr "Compute angle between two lines or linear edges"
2833 msgid "TOP_TOLERANCE"
2834 msgstr "Compute tolerance"
2836 msgid "MEN_TOLERANCE"
2837 msgstr "Compute tolerance"
2839 msgid "STB_TOLERANCE"
2840 msgstr "Compute tolerance"
2860 msgid "TOP_CHECK_COMPOUND"
2861 msgstr "Check compound of blocks"
2863 msgid "MEN_CHECK_COMPOUND"
2864 msgstr "Check compound of blocks"
2866 msgid "STB_CHECK_COMPOUND"
2867 msgstr "Check compound of blocks"
2872 msgid "TOP_CHECK_GEOMETRY"
2873 msgstr "Check Geometry"
2875 msgid "MEN_CHECK_GEOMETRY"
2876 msgstr "Check Geometry"
2878 msgid "STB_CHECK_GEOMETRY"
2879 msgstr "Check Geometry"
2881 msgid "MEN_PREFERENCES"
2882 msgstr "Preferences"
2884 msgid "MEN_PREFERENCES_GEOM"
2887 msgid "TOP_SHADING_COLOR"
2888 msgstr "Set shading color"
2890 msgid "MEN_SHADING_COLOR"
2891 msgstr "Shading color"
2893 msgid "STB_SHADING_COLOR"
2894 msgstr "Set shading color"
2897 msgstr "Set number of isolines"
2903 msgstr "Set number of isolines"
2905 msgid "TOP_STEP_VALUE"
2906 msgstr "Set step value"
2908 msgid "MEN_STEP_VALUE"
2911 msgid "STB_STEP_VALUE"
2912 msgstr "Set step value"
2917 msgid "MEN_DISPLAY_MODE"
2918 msgstr "Display mode"
2926 msgid "MEN_WIREFRAME"
2932 msgid "TOP_DISPLAY_ALL"
2935 msgid "MEN_DISPLAY_ALL"
2938 msgid "STB_DISPLAY_ALL"
2941 msgid "TOP_ERASE_ALL"
2944 msgid "MEN_ERASE_ALL"
2947 msgid "STB_ERASE_ALL"
2957 msgstr "Show object(s)"
2959 msgid "TOP_DISPLAY_ONLY"
2962 msgid "MEN_DISPLAY_ONLY"
2965 msgid "STB_DISPLAY_ONLY"
2975 msgstr "Hide object(s)"
2977 msgid "TOP_POP_RENAME"
2980 msgid "MEN_POP_RENAME"
2983 msgid "STB_POP_RENAME"
2986 msgid "TOP_POP_WIREFRAME"
2989 msgid "MEN_POP_WIREFRAME"
2992 msgid "STB_POP_WIREFRAME"
2995 msgid "TOP_POP_SHADING"
2998 msgid "MEN_POP_SHADING"
3001 msgid "STB_POP_SHADING"
3004 msgid "TOP_POP_AUTO_COLOR"
3007 msgid "MEN_POP_AUTO_COLOR"
3010 msgid "STB_POP_AUTO_COLOR"
3013 msgid "TOP_POP_DISABLE_AUTO_COLOR"
3014 msgstr "Disable auto color"
3016 msgid "MEN_POP_DISABLE_AUTO_COLOR"
3017 msgstr "Disable auto color"
3019 msgid "STB_POP_DISABLE_AUTO_COLOR"
3020 msgstr "Disable auto color"
3022 msgid "TOP_POP_COLOR"
3025 msgid "MEN_POP_COLOR"
3028 msgid "STB_POP_COLOR"
3031 msgid "TOP_POP_TRANSPARENCY"
3032 msgstr "Transparency"
3034 msgid "MEN_POP_TRANSPARENCY"
3035 msgstr "Transparency"
3037 msgid "STB_POP_TRANSPARENCY"
3038 msgstr "Transparency"
3040 msgid "TOP_POP_ISOS"
3043 msgid "MEN_POP_ISOS"
3046 msgid "STB_POP_ISOS"
3049 msgid "TOP_POP_CREATE_GROUP"
3050 msgstr "Create Group"
3052 msgid "MEN_POP_CREATE_GROUP"
3053 msgstr "Create Group"
3055 msgid "STB_POP_CREATE_GROUP"
3056 msgstr "Create Group"
3061 msgid "TOOL_PRIMITIVES"
3064 msgid "TOOL_BOOLEAN"
3065 msgstr "Boolean operations"
3067 msgid "TOOL_GENERATION"
3070 msgid "TOOL_TRANSFORMATION"
3071 msgstr "Transformation"
3079 msgid "GEOM_RESULT_NAME_GRP"
3080 msgstr "Result name"
3082 msgid "GEOM_RESULT_NAME_LBL"
3085 msgid "GEOM_ERR_GET_ENGINE"
3086 msgstr "Failed to obtain GEOM Engine component. Reload Geometry module and try again."
3088 msgid "PREF_GROUP_OCCVIEWER"
3089 msgstr "OCC Viewer 3d"
3091 msgid "PREF_GROUP_GENERAL"
3094 msgid "PREF_GROUP_VERTEX"
3095 msgstr "Marker of Points"
3097 msgid "PREF_SHADING_COLOR"
3098 msgstr "Default shading color"
3100 msgid "PREF_WIREFRAME_COLOR"
3101 msgstr "Default wireframe color"
3103 msgid "PREF_FREE_BOUND_COLOR"
3104 msgstr "Color of free boundaries"
3106 msgid "PREF_LINE_COLOR"
3107 msgstr "Color of edges, vectors, wires"
3109 msgid "PREF_POINT_COLOR"
3110 msgstr "Color of points"
3112 msgid "PREF_ISOS_COLOR"
3113 msgstr "Color of isolines"
3115 msgid "PREF_STEP_VALUE"
3116 msgstr "Step value for spin boxes"
3118 msgid "PREF_DISPLAY_MODE"
3119 msgstr "Default display mode"
3121 msgid "PREF_TAB_SETTINGS"
3124 msgid "PREF_TYPE_OF_MARKER"
3127 msgid "PREF_MARKER_SCALE"
3157 msgid "ERROR_SHAPE_TYPE"
3158 msgstr "Object of incorrect type selected!\nPlease, select face, shell or solid and try again"
3161 msgstr "Selected object has been used to create another one\n It can't be deleted "
3163 msgid "MEN_SELECT_ONLY"
3164 msgstr "Select Only"
3166 msgid "STB_VERTEX_SEL_ONLY"
3167 msgstr "Select only a Points"
3169 msgid "STB_EDGE_SEL_ONLY"
3170 msgstr "Select only a Edges"
3172 msgid "STB_WIRE_SEL_ONLY"
3173 msgstr "Select only a Wires"
3175 msgid "STB_FACE_SEL_ONLY"
3176 msgstr "Select only a Faces"
3178 msgid "STB_SHELL_SEL_ONLY"
3179 msgstr "Select only a Shells"
3181 msgid "STB_SOLID_SEL_ONLY"
3182 msgstr "Select only a Solids"
3184 msgid "STB_COMPOUND_SEL_ONLY"
3185 msgstr "Select only a Compounds"
3187 msgid "STB_ALL_SEL_ONLY"
3188 msgstr "Select all Objects"
3190 msgid "MEN_VERTEX_SEL_ONLY"
3193 msgid "MEN_EDGE_SEL_ONLY"
3196 msgid "MEN_WIRE_SEL_ONLY"
3199 msgid "MEN_FACE_SEL_ONLY"
3202 msgid "MEN_SHELL_SEL_ONLY"
3205 msgid "MEN_SOLID_SEL_ONLY"
3208 msgid "MEN_COMPOUND_SEL_ONLY"
3211 msgid "MEN_ALL_SEL_ONLY"