1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: 2003-10-27 17:32+0100\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
65 msgid "GEOM_BUT_EXPLODE"
68 #NOT_FOUND_ANY error from some operations
70 msgstr "Not a single entity has been found"
73 #==============================================================================
76 #: GeometryGUI.cxx:563
77 msgid "GEOM_INF_LOADED"
78 msgstr "File %1 loaded."
81 #==============================================================================
84 #: GeometryGUI.cxx:3069
85 msgid "GEOM_PRP_COMMAND"
86 msgstr "No command associated with this id = %1."
88 #: GeometryGUI.cxx:4977
89 msgid "GEOM_PRP_ABORT"
90 msgstr "Operation aborted"
92 #: GeometryGUI.cxx:5058
94 msgstr "Operation done"
96 #: GeometryGUI.cxx:3717
97 msgid "GEOM_PRP_LOADING"
98 msgstr "Loading %1 ..."
100 #: GeometryGUI.cxx:1412
101 msgid "GEOM_PRP_NULLSHAPE"
102 msgstr "Error, null or inappropriate shape !"
104 #: GeometryGUI.cxx:5072
105 msgid "GEOM_PRP_READY"
108 #: GeometryGUI.cxx:1690
109 msgid "GEOM_PRP_SELECT_SUBSHAPES"
110 msgstr "Select Sub Shapes"
112 msgid "GEOM_PRP_EXPORT"
113 msgstr "Exporting geometry to %1 ..."
116 msgstr "Confirm operation"
118 msgid "GEOM_CONFIRM_INFO"
119 msgstr "Shape contains %1 sub shapes !"
122 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
123 msgstr "Not allowed in VTK viewer"
125 #: GeometryGUI.cxx:1690
126 msgid "GEOM_PRP_SHAPE_IN_STUDY"
127 msgstr "Main shape must be in the study before"
129 #: GeometryGUI.cxx:1690
130 msgid "GEOM_PRP_SELECT_EDGE"
131 msgstr "Select edges and click on Apply"
133 #: GeometryGUI.cxx:1690
134 msgid "GEOM_PRP_SELECT_FACE"
135 msgstr "Select faces to suppress and click on Ok/Apply"
137 #: GeometryGUI.cxx:1690
138 msgid "GEOM_PRP_SELECT_FIRST"
139 msgstr "Select main shape first"
141 #: GeometryGUI.cxx:1690
142 msgid "GEOM_PRP_MIN_DIST"
143 msgstr "Min Distance not computed"
145 msgid "GEOM_STUDY_LOCKED"
146 msgstr "The active study is locked and therefore cannot be modified"
149 #==============================================================================
152 #: GeometryGUI.cxx:3698
153 msgid "GEOM_MEN_ALL_FILES"
154 msgstr "All Files ( * )"
156 #: GeometryGUI.cxx:4389
157 msgid "GEOM_MEN_ANGLE"
160 #: GeometryGUI.cxx:3941
161 msgid "GEOM_MEN_COMPONENT"
164 #: GeometryGUI.cxx:4389
165 msgid "GEOM_MEN_ENTER_ANGLE"
166 msgstr "Enter An Angle In Degrees"
168 #: GeometryGUI.cxx:3758
169 msgid "GEOM_MEN_EXPORT"
172 #: GeometryGUI.cxx:3648
173 msgid "GEOM_MEN_IMPORT"
176 #: GeometryGUI.cxx:2931
177 msgid "GEOM_MEN_ISOS"
178 msgstr "Select Number Of Isos"
180 #: GeometryGUI.cxx:4278
181 msgid "GEOM_MEN_POPUP_NAME"
184 #: GeometryGUI.cxx:4414
185 msgid "GEOM_MEN_SKETCHER_X"
186 msgstr "Enter a length to set X"
188 #: GeometryGUI.cxx:4438
189 msgid "GEOM_MEN_SKETCHER_Y"
190 msgstr "Enter a length to set Y"
192 #: GeometryGUI.cxx:2898
193 msgid "GEOM_MEN_TRANSPARENCY"
194 msgstr "Transparency"
196 #: GeometryGUI.cxx:4413
200 #: GeometryGUI.cxx:4437
204 #: GeometryGUI_NbIsosDlg.cxx:36
205 msgid "GEOM_MEN_ISOU"
208 #: GeometryGUI_NbIsosDlg.cxx:53
209 msgid "GEOM_MEN_ISOV"
212 #: GeometryGUI_TransparencyDlg.cxx:31
213 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
214 msgstr "Transparency :"
216 msgid "GEOM_MEN_STEP_LABEL"
219 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
220 msgstr "Identical names : select by mouse !"
222 msgid "GEOM_NAME_INCORRECT"
223 msgstr "Object name not found"
225 msgid "GEOM_INCORRECT_INPUT"
226 msgstr "Incorrect input data!"
229 #==============================================================================
232 #: GeometryGUI.cxx:892
233 msgid "GEOM_WRN_RADIUS_NULL"
234 msgstr "Radius is null"
236 #: GeometryGUI.cxx:3854
237 msgid "GEOM_WRN_WARNING"
240 #: GeometryGUI.cxx:3854
241 msgid "GEOM_REALLY_DELETE"
242 msgstr "Do you really want to delete this %1 object(s):"
245 #==============================================================================
253 msgid "GEOM_MAIN_OBJECT"
257 msgid "GEOM_TOOL_OBJECT"
261 msgid "GEOM_BASE_OBJECT"
265 msgid "GEOM_PATH_OBJECT"
273 msgid "GEOM_OBJECT_I"
277 msgid "GEOM_OBJECT_RESULT"
278 msgstr "Object And Result"
285 msgid "GEOM_BASE_POINT"
289 msgid "GEOM_CENTER_POINT"
290 msgstr "Center Point"
293 msgid "GEOM_DIAGONAL_POINTS"
294 msgstr "Diagonal Points"
297 msgid "GEOM_CENTRAL_POINT"
298 msgstr "Central Point"
313 msgid "GEOM_ARGUMENTS"
325 msgid "GEOM_CONSTANT_RADIUS"
337 msgid "GEOM_RADIUS_I"
353 msgid "GEOM_COORDINATES"
366 msgstr "Both Directions"
369 msgid "GEOM_REVERSE_U"
373 msgid "GEOM_REVERSE_V"
389 msgid "GEOM_VECTOR_LENGTH"
390 msgstr "Vector Length :"
393 msgid "GEOM_REVERSE_VECTOR"
394 msgstr "Reverse Vector"
397 msgid "GEOM_POINT_MIRROR"
398 msgstr "Point Mirror"
401 msgid "GEOM_AXE_MIRROR"
405 msgid "GEOM_PLANE_MIRROR"
406 msgstr "Plane Mirror"
409 msgid "GEOM_FACE_SELECTION"
410 msgstr "Face Selection"
417 msgid "GEOM_WATER_DENSITY"
418 msgstr "Water Density :"
421 msgid "GEOM_MESHING_DEFLECTION"
422 msgstr "Meshing Deflect. :"
425 msgid "GEOM_DIMENSIONS"
429 msgid "GEOM_PRECISION"
433 msgid "GEOM_SELECTION"
437 msgid "GEOM_NB_TIMES"
441 msgid "GEOM_NB_TIMES_U"
442 msgstr "Nb. Times U :"
445 msgid "GEOM_NB_TIMES_V"
446 msgstr "Nb. Times V :"
461 #==============================================================================
465 msgid "GEOM_PARTITION"
468 #Half-space partition
469 msgid "GEOM_PARTITION_HALFSPACE"
470 msgstr "Half-space partition"
473 msgid "GEOM_TOLERANCE"
477 msgid "GEOM_ORIENTATION"
485 msgid "GEOM_REVOLUTION"
489 msgid "GEOM_ROTATION"
493 msgid "GEOM_ARCHIMEDE"
505 msgid "GEOM_DISTANCE"
521 msgid "GEOM_POSITION"
537 msgid "GEOM_TRANSLATION"
542 msgstr "Working Plane"
549 msgid "GEOM_EXTRUSION"
553 msgid "GEOM_SUB_SHAPE"
557 msgid "GEOM_SUPRESSFACE"
558 msgstr "Supress Face"
569 msgid "GEOM_CHECK_SHAPE"
572 #Check Blocks Compound
573 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
574 msgstr "Check and Improve Blocks Compound"
576 #Check Blocks Compound Errors
577 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
580 #Check Blocks Compound Errors
581 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
582 msgstr "The Compound of Blocks has no errors"
584 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
585 msgstr "The Compound of Blocks has errors"
587 #Check Blocks Compound SubShapes
588 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
589 msgstr "Incriminated Sub-Shapes"
597 msgstr "Bounding Box"
601 msgstr "Center Of Mass"
605 msgstr "Normal To A Face"
607 msgid "GEOM_VECTOR_NORMALE"
608 msgstr "Vector_Normal"
611 msgid "GEOM_PROPERTIES"
612 msgstr "Basic Properties"
615 msgid "GEOM_MULTITRANSLATION"
616 msgstr "Multi-Translation"
619 msgid "GEOM_MULTIROTATION"
620 msgstr "Multi-Rotation"
623 #==============================================================================
642 msgid "GEOM_ELLIPSE_TITLE"
643 msgstr "Ellipse Construction"
646 msgid "GEOM_RADIUS_MAJOR"
647 msgstr "Major radius :"
650 msgid "GEOM_RADIUS_MINOR"
651 msgstr "Minor radius :"
654 msgid "GEOM_COMPOUND"
658 msgid "GEOM_BLOCKS_COMPOUND"
659 msgstr "BlocksCompound"
662 msgid "GEOM_COMPOUNDSOLID"
670 msgid "GEOM_CYLINDER"
686 msgid "GEOM_FACE_OR_LCS"
726 msgid "GEOM_SURFCONE"
727 msgstr "Conical Face"
730 msgid "GEOM_SURFCYLINDER"
731 msgstr "Cylindrical Face"
734 msgid "GEOM_SURFSPHERE"
735 msgstr "Spherical Face"
738 msgid "GEOM_SURFTORUS"
739 msgstr "Toroidal Face"
750 msgid "GEOM_VECTOR_U"
754 msgid "GEOM_VECTOR_V"
774 msgstr "Imported_Shape"
777 msgid "GEOM_PARAMETER"
781 #==============================================================================
829 #==============================================================================
833 msgid "GEOM_STEP_TITLE"
834 msgstr "Step value for GUI constructions"
836 #: GeometryGUI_ArcDlg.cxx:45
837 msgid "GEOM_ARC_TITLE"
838 msgstr "Arc Construction"
840 #: GeometryGUI_ArchimedeDlg.cxx:55
841 msgid "GEOM_ARCHIMEDE_TITLE"
842 msgstr "Archimede Construction"
844 #: GeometryGUI_BndBoxDlg.cxx:59
845 msgid "GEOM_BNDBOX_TITLE"
846 msgstr "Bounding Box Informations"
848 #: GeometryGUI_BndBoxDlg.cxx:82
849 msgid "GEOM_BNDBOX_OBJDIM"
850 msgstr "Object And Its Dimensions"
852 #: GeometryGUI_BoxDlg.cxx:50
853 msgid "GEOM_BOX_TITLE"
854 msgstr "Box Construction"
856 #: GeometryGUI_BoxDlg.cxx:50
858 msgstr "Dimensions At Origin"
860 #: GeometryGUI_ChamferDlg.cxx:58
861 msgid "GEOM_CHAMFER_TITLE"
862 msgstr "Chamfer Construction"
864 #: GeometryGUI_ChamferDlg.cxx:58
865 msgid "GEOM_CHAMFER_ALL"
866 msgstr "Chamfer On Whole Shape"
868 #: GeometryGUI_ChamferDlg.cxx:58
869 msgid "GEOM_CHAMFER_EDGES"
870 msgstr "Chamfer On Edges From Shape"
872 #: GeometryGUI_ChamferDlg.cxx:58
873 msgid "GEOM_CHAMFER_EDGE"
874 msgstr "Chamfer On Selected Edges"
876 #: GeometryGUI_ChamferDlg.cxx:58
877 msgid "SELECTED_EDGE"
878 msgstr "Selected Edges"
880 #: GeometryGUI_ChamferDlg.cxx:58
881 msgid "GEOM_CHAMFER_FACES"
882 msgstr "Chamfer On Faces From Shape"
884 #: GeometryGUI_CircleDlg.cxx:48
885 msgid "GEOM_CIRCLE_TITLE"
886 msgstr "Circle Construction"
888 #: GeometryGUI_CenterMassDlg.cxx:77
889 msgid "GEOM_CMASS_TITLE"
890 msgstr "Center Of Mass Construction"
892 #: GeometryGUI_NormaleDlg.cxx:57
893 msgid "GEOM_NORMALE_TITLE"
894 msgstr "Create Normal To A Face"
896 msgid "GEOM_PLANE_SIZE"
897 msgstr "Size of plane :"
899 #: GeometryGUI_CommonDlg.cxx:47
900 msgid "GEOM_COMMON_TITLE"
901 msgstr "BOOLEAN : Common Of Two Objects"
903 #: GeometryGUI_CompoundDlg.cxx:44
904 msgid "GEOM_COMPOUND_TITLE"
905 msgstr "Create A Compound"
907 #: GeometryGUI_ConeDlg.cxx:49
908 msgid "GEOM_CONE_TITLE"
909 msgstr "Cone Construction"
911 #: GeometryGUI_CutDlg.cxx:48
912 msgid "GEOM_CUT_TITLE"
913 msgstr "BOOLEAN : Cut Of Two Objects"
915 #: GeometryGUI_CylinderDlg.cxx:47
916 msgid "GEOM_CYLINDER_TITLE"
917 msgstr "Cylinder Construction"
919 #: GeometryGUI_CheckShape.cxx:60
920 msgid "GEOM_CHECK_TITLE"
921 msgstr "Check Shape Informations"
923 #: GeometryGUI_CheckShape.cxx:83
924 msgid "GEOM_CHECK_INFOS"
925 msgstr "Object And Its Topological Informations"
927 #: GeometryGUI_DistanceDlg.cxx:57
928 msgid "GEOM_MINDIST_TITLE"
929 msgstr "Minimun Distance Between Two Objects"
931 #: GeometryGUI_DistanceDlg.cxx:57
932 msgid "GEOM_MINDIST_OBJ"
933 msgstr "Objects And Results"
935 #: GeometryGUI_AngleDlg.cxx:82
936 msgid "GEOM_MEASURE_ANGLE_TITLE"
937 msgstr "Angle Between Two Straight Edges/Lines/Vectors"
939 #: GeometryGUI_AngleDlg.cxx:86
940 msgid "GEOM_MEASURE_ANGLE_ANGLE"
943 #: GeometryGUI_AngleDlg.cxx:90
944 msgid "GEOM_MEASURE_ANGLE_OBJ"
945 msgstr "Objects And Results"
947 #: GeometryGUI_AngleDlg.cxx:93
948 msgid "GEOM_MEASURE_ANGLE_IS"
949 msgstr "Angle in degrees :"
951 #: GeometryGUI_EdgeDlg.cxx:47
952 msgid "GEOM_EDGE_TITLE"
953 msgstr "Create An Edge"
955 #: GeometryGUI_FilletDlg.cxx:58
956 msgid "GEOM_FILLET_TITLE"
957 msgstr "Fillet Construction"
959 #: GeometryGUI_FilletDlg.cxx:58
960 msgid "GEOM_FILLET_ALL"
961 msgstr "Fillet On Whole Shape"
963 #: GeometryGUI_FilletDlg.cxx:58
964 msgid "GEOM_FILLET_EDGES"
965 msgstr "Fillet On Edges From Shape"
967 #: GeometryGUI_FilletDlg.cxx:58
968 msgid "GEOM_FILLET_FACES"
969 msgstr "Fillet On Faces From Shape"
971 #: GeometryGUI_FaceDlg.cxx:49
972 msgid "GEOM_FACE_TITLE"
973 msgstr "Create A Face"
975 #: GeometryGUI_FaceDlg.cxx:78
976 msgid "GEOM_FACE_FFW"
977 msgstr "Face creation from wires and/or edges"
979 #: GeometryGUI_FaceDlg.cxx:103
980 msgid "GEOM_FACE_OPT"
981 msgstr "Try to create a planar face"
983 #: GeometryGUI_FillingDlg.cxx:53
984 msgid "GEOM_FILLING_TITLE"
985 msgstr "Filling Surface With Edges"
987 #: GeometryGUI_FillingDlg.cxx:112
988 msgid "GEOM_FILLING_ARG"
989 msgstr "Arguments And Parameters"
991 #: GeometryGUI_FillingDlg.cxx:128
992 msgid "GEOM_FILLING_MIN_DEG"
995 #: GeometryGUI_FillingDlg.cxx:142
996 msgid "GEOM_FILLING_MAX_DEG"
999 #: GeometryGUI_FillingDlg.cxx:150
1000 msgid "GEOM_FILLING_TOL_2D"
1003 #: GeometryGUI_FillingDlg.cxx:170
1004 msgid "GEOM_FILLING_COMPOUND"
1005 msgstr "Edges compound"
1007 #: GeometryGUI_FillingDlg.cxx:184
1008 msgid "GEOM_FILLING_TOL_3D"
1011 #: GeometryGUI_FillingDlg.cxx:192
1012 msgid "GEOM_FILLING_NB_ITER"
1015 #: GeometryGUI_FuseDlg.cxx:48
1016 msgid "GEOM_FUSE_TITLE"
1017 msgstr "BOOLEAN : Fuse Two Objects"
1019 #: GeometryGUI_InertiaDlg.cxx:42
1020 msgid "GEOM_INERTIA_TITLE"
1021 msgstr "Calculs Of Inertia"
1023 #: GeometryGUI_InertiaDlg.cxx:50
1024 msgid "GEOM_INERTIA_CONSTR"
1025 msgstr "Matrix And Moments Of Inertia"
1027 #: GeometryGUI_InertiaDlg.cxx:100
1028 msgid "GEOM_INERTIA_I"
1031 #: GeometryGUI_InertiaDlg.cxx:182
1032 msgid "GEOM_INERTIA_IXYZ"
1033 msgstr "IX & IY & IZ :"
1035 #: GeometryGUI_LineDlg.cxx:50
1036 msgid "GEOM_LINE_TITLE"
1037 msgstr "Line Construction"
1039 #: GeometryGUI_MaxToleranceDlg.cxx:53
1040 msgid "GEOM_TOLERANCE_TITLE"
1041 msgstr "Maximum Tolerance"
1043 #: GeometryGUI_MaxToleranceDlg.cxx:84
1044 msgid "GEOM_TOLERANCE_CONSTR"
1045 msgstr "Object And Its Tolerances"
1047 #: GeometryGUI_MaxToleranceDlg.cxx:121
1048 msgid "GEOM_TOLERANCE_FACE"
1051 #: GeometryGUI_MaxToleranceDlg.cxx:138
1052 msgid "GEOM_TOLERANCE_EDGE"
1055 #: GeometryGUI_MaxToleranceDlg.cxx:155
1056 msgid "GEOM_TOLERANCE_VERTEX"
1059 #: GeometryGUI_MirrorDlg.cxx:52
1060 msgid "GEOM_MIRROR_TITLE"
1061 msgstr "Mirror An Object"
1063 #: GeometryGUI_OrientationDlg.cxx:46
1064 msgid "GEOM_ORIENTATION_TITLE"
1065 msgstr "Change Orientation"
1067 #: GeometryGUI_OrientationDlg.cxx:134
1068 msgid "GEOM_ORIENTATION_OPT"
1069 msgstr "Reverse orientation with normal vectors simulation"
1071 #: GeometryGUI_PartitionDlg.cxx:45
1072 msgid "GEOM_PARTITION_TITLE"
1073 msgstr "Partition Of Object With Tool"
1075 #: GeometryGUI_PartitionDlg.cxx:45
1076 msgid "GEOM_KEEP_OBJECT"
1077 msgstr "Keep Object"
1079 #: GeometryGUI_PartitionDlg.cxx:45
1080 msgid "GEOM_PARTITION_ORIENTATION"
1081 msgstr "Change Orientation"
1083 #: GeometryGUI_PartitionDlg.cxx:45
1084 msgid "SUPPRESS_RESULT"
1085 msgstr "Suppress Result"
1087 msgid "GEOM_REMOVE_WEBS"
1088 msgstr "Remove webs"
1090 msgid "GEOM_SET_MATERIALS"
1091 msgstr "Set materials"
1093 #: OperationGUI_MaterialDlg.cxx:45
1094 msgid "GEOM_MATERIAL_TITLE"
1095 msgstr "Define materials for Dominant Fuse"
1097 msgid "GEOM_MATERIAL_SHAPE"
1100 msgid "GEOM_MATERIAL_MATERIAL"
1103 msgid "GEOM_MATERIAL_ID"
1104 msgstr "Material ID:"
1106 msgid "GEOM_MATERIAL_SET"
1109 #: GeometryGUI_PipeDlg.cxx:47
1110 msgid "GEOM_PIPE_TITLE"
1111 msgstr "Pipe Construction"
1113 #: GeometryGUI_PointDlg.cxx:52
1114 msgid "GEOM_POINT_TITLE"
1115 msgstr "Point Construction"
1117 #: GeometryGUI_PlaneDlg.cxx:60
1118 msgid "GEOM_PLANE_TITLE"
1119 msgstr "Plane Construction"
1121 #: GeometryGUI_PlaneDlg.cxx:172
1122 msgid "GEOM_PLANE_PVC"
1123 msgstr "Point + Coordinate Vector"
1125 #: GeometryGUI_PlaneDlg.cxx:133
1126 msgid "GEOM_PLANE_PV"
1127 msgstr "Point + Vector"
1129 #: GeometryGUI_PrismDlg.cxx:54
1130 msgid "GEOM_EXTRUSION_TITLE"
1131 msgstr "Construction by Extrusion"
1133 #: GeometryGUI_PrismDlg.cxx:83
1134 msgid "GEOM_EXTRUSION_BSV"
1135 msgstr "Base Shape + Vector"
1137 msgid "GEOM_EXTRUSION_BSV_2P"
1138 msgstr "Base Shape + 2 Points"
1140 #: GeometryGUI_PropertiesDlg.cxx:56
1141 msgid "GEOM_PROPERTIES_TITLE"
1142 msgstr "Basic Properties Informations"
1144 #: GeometryGUI_PropertiesDlg.cxx:78
1145 msgid "GEOM_PROPERTIES_CONSTR"
1146 msgstr "Object And Its Properties"
1148 #: GeometryGUI_PropertiesDlg.cxx:114
1149 msgid "GEOM_PROPERTIES_SURFACE"
1150 msgstr "Surface is :"
1152 #: GeometryGUI_PropertiesDlg.cxx:120
1153 msgid "GEOM_PROPERTIES_VOLUME"
1154 msgstr "Volume is :"
1156 #: GeometryGUI_RevolDlg.cxx:49
1157 msgid "GEOM_REVOLUTION_TITLE"
1158 msgstr "Construction By Revolution"
1160 #: GeometryGUI_RotationDlg.cxx:51
1161 msgid "GEOM_ROTATION_TITLE"
1162 msgstr "Rotation Of An Object"
1164 #: GeometryGUI_ScaleDlg.cxx:52
1165 msgid "GEOM_SCALE_TITLE"
1166 msgstr "Scale An Object"
1168 #: GeometryGUI_PositionDlg.cxx:52
1169 msgid "GEOM_POSITION_TITLE"
1170 msgstr "Modify the Location of an Object"
1172 #: GeometryGUI_PositionDlg.cxx:52
1173 msgid "GEOM_START_LCS"
1176 #: GeometryGUI_PositionDlg.cxx:52
1177 msgid "GEOM_END_LCS"
1180 #: GeometryGUI_OffsetDlg.cxx:53
1181 msgid "GEOM_OFFSET_TITLE"
1182 msgstr "Offset Surface"
1184 #: GeometryGUI_ScaleDlg.cxx:117
1185 msgid "GEOM_SCALE_FACTOR"
1186 msgstr "Scale Factor :"
1188 #: GeometryGUI_SectionDlg.cxx:50
1189 msgid "GEOM_SECTION_TITLE"
1190 msgstr "BOOLEAN : Section Of Two Objects"
1192 #: GeometryGUI_SewingDlg.cxx:48
1193 msgid "GEOM_SEWING_TITLE"
1194 msgstr "Topological sewing"
1196 #: GeometryGUI_ShellDlg.cxx:53
1197 msgid "GEOM_SHELL_TITLE"
1198 msgstr "Shell Construction"
1200 #: GeometryGUI_SolidDlg.cxx:74
1201 msgid "GEOM_SOLID_TITLE"
1202 msgstr "Solid Construction"
1204 #: GeometryGUI_SphereDlg.cxx:50
1205 msgid "GEOM_SPHERE_TITLE"
1206 msgstr "Sphere Construction"
1208 #: GeometryGUI_SphereDlg.cxx:113
1209 msgid "GEOM_SPHERE_CR"
1210 msgstr "Center + Radius"
1212 #: GeometryGUI_SphereDlg.cxx:146
1213 msgid "GEOM_SPHERE_RO"
1214 msgstr "Radius At Origin"
1216 #: GeometryGUI_SubShapeDlg.cxx:55
1217 msgid "GEOM_SUBSHAPE_TITLE"
1218 msgstr "Sub Shapes Selection"
1220 #: GeometryGUI_SubShapeDlg.cxx:131
1221 msgid "GEOM_SUBSHAPE_TYPE"
1222 msgstr "Sub Shapes Type :"
1224 #: GeometryGUI_SubShapeDlg.cxx:137
1225 msgid "GEOM_SUBSHAPE_SELECT"
1226 msgstr "Select Sub Shapes"
1228 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1229 msgstr "Please, select one or more sub-shapes"
1231 #: GeometryGUI_TorusDlg.cxx:51
1232 msgid "GEOM_TORUS_TITLE"
1233 msgstr "Torus Construction"
1235 #: GeometryGUI_SuppressFacesDlg.cxx:103
1236 msgid "GEOM_SUPRESSFACE_TITLE"
1237 msgstr "Suppress Faces In An Object"
1239 #: GeometryGUI_SuppressFacesDlg.cxx:164
1240 msgid "GEOM_SUPRESSFACE_SELECT"
1241 msgstr "Select Faces To Suppress"
1243 #: GeometryGUI_TranslationDlg.cxx:78
1244 msgid "GEOM_TRANSLATION_COOR"
1245 msgstr "Translation With Coordinates"
1247 msgid "GEOM_TRANSPARENCY_TITLE"
1248 msgstr "Transparency"
1250 msgid "GEOM_TRANSPARENCY_OPAQUE"
1253 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1254 msgstr "Transparent"
1256 msgid "GEOM_SUPPRESSHOLE_TITLE"
1257 msgstr "Suppress holes"
1259 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1260 msgstr "Select the face with hole"
1262 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1263 msgstr "Select wire on face"
1265 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1266 msgstr "Select end face (if hole traversing)"
1268 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1269 msgstr "Select end wire (if hole traversing)"
1271 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1272 msgstr "Face or shell"
1274 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1275 msgstr "Select hole(s) on the face"
1277 #: GeometryGUI_TranslationDlg.cxx:56
1278 msgid "GEOM_TRANSLATION_TITLE"
1279 msgstr "Translation Of An Object"
1281 #: GeometryGUI_VectorDlg.cxx:54
1282 msgid "GEOM_VECTOR_TITLE"
1283 msgstr "Vector Construction"
1285 #: GeometryGUI_WhatisDlg.cxx:63
1286 msgid "GEOM_WHATIS_TITLE"
1287 msgstr "Whatis Informations"
1289 #: GeometryGUI_WhatisDlg.cxx:86
1290 msgid "GEOM_WHATIS_OBJECT"
1291 msgstr "Object And Its Topological Informations"
1293 #: GeometryGUI_WireDlg.cxx:46
1294 msgid "GEOM_WIRE_TITLE"
1295 msgstr "Create A Wire"
1297 #: GeometryGUI_WireDlg.cxx:103
1298 msgid "GEOM_WIRE_CONNECT"
1299 msgstr "Wire creation from wires/edges connected"
1301 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1302 msgid "GEOM_WPLANE_TITLE"
1303 msgstr "Working Plane Selection"
1305 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1306 msgid "GEOM_WPLANE_FACE"
1307 msgstr "Plane, Planar Face or LCS"
1309 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1310 msgid "GEOM_WPLANE_VECTOR"
1311 msgstr "Select 2 vectors"
1313 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1314 msgid "GEOM_WPLANE_VX"
1317 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1318 msgid "GEOM_WPLANE_VZ"
1321 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1322 msgid "GEOM_WPLANE_ORIGIN"
1323 msgstr "Select a plane"
1325 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1326 msgid "GEOM_WPLANE_OYZ"
1329 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1330 msgid "GEOM_WPLANE_OZX"
1333 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1334 msgid "GEOM_WPLANE_OXY"
1337 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1338 msgid "GEOM_REVERSE_PLANE"
1339 msgstr "Reverse the plane normal"
1341 #: GeometryGUI_multiTranslationDlg.cxx:107
1342 msgid "GEOM_MULTITRANSLATION_TITLE"
1343 msgstr "Multi-Translation"
1345 #: GeometryGUI_multiTranslationDlg.cxx:107
1346 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1347 msgstr "Multi Translation Simple"
1349 #: GeometryGUI_multiTranslationDlg.cxx:107
1350 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1351 msgstr "Multi Translation Double"
1353 #: GeometryGUI_multiRotationDlg.cxx:107
1354 msgid "GEOM_MULTIROTATION_TITLE"
1355 msgstr "Multi-Rotation"
1357 #: GeometryGUI_multiRotationDlg.cxx:107
1358 msgid "GEOM_MULTIROTATION_SIMPLE"
1359 msgstr "Multi Rotation Simple"
1361 #: GeometryGUI_multiRotationDlg.cxx:107
1362 msgid "GEOM_MULTIROTATION_DOUBLE"
1363 msgstr "Multi Rotation Double"
1365 msgid "GEOM_PARAM_POINT"
1366 msgstr "Parametric point"
1368 msgid "GEOM_REF_POINT"
1369 msgstr "Point with reference"
1371 msgid "GEOM_LINE_INTERSECTION"
1372 msgstr "Point On Lines Intersection"
1375 #==============================================================================
1378 #: GeometryGUI.cxx:4613
1379 msgid "GEOM_MEN_WIREFRAME"
1382 #: GeometryGUI.cxx:4613
1383 msgid "GEOM_MEN_SHADING"
1386 msgid "GEOM_RECONSTRUCTION_LIMIT"
1387 msgstr "Reconstruction Limit"
1389 msgid "GEOM_KEEP_NONLIMIT_SHAPES"
1390 msgstr "Keep nonlimit shapes"
1392 msgid "GEOM_SUPPRESS_RESULT"
1393 msgstr "Suppress Result"
1395 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1398 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1401 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1403 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1405 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1407 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1409 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1411 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1413 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1416 msgid "GEOM_SPLINE_TITLE"
1417 msgstr "Spline Construction"
1422 msgid "GEOM_INTERPOL"
1423 msgstr "Interpolation"
1426 #==============================================================================
1429 msgid "GEOM_SKETCHER_EL"
1430 msgstr "Element Type"
1432 msgid "GEOM_BUT_CLOSE_SKETCH"
1433 msgstr "Sketch Closure"
1435 msgid "GEOM_BUT_END_SKETCH"
1436 msgstr "Sketch Validation"
1438 msgid "GEOM_SKETCHER_TITLE"
1439 msgstr "Sketch Construction"
1441 msgid "GEOM_SKETCHER_POINT"
1444 msgid "GEOM_SKETCHER_SEGMENT"
1447 msgid "GEOM_SKETCHER_ARC"
1450 msgid "GEOM_SKETCHER_DIR"
1453 msgid "GEOM_SKETCHER_POINT2"
1456 msgid "GEOM_SKETCHER_DEST"
1457 msgstr "Destination"
1459 msgid "GEOM_SKETCHER_ABS"
1462 msgid "GEOM_SKETCHER_REL"
1465 msgid "GEOM_SKETCHER_SEL"
1468 msgid "GEOM_SKETCHER_ANGLE"
1471 msgid "GEOM_SKETCHER_PER"
1472 msgstr "Perpendicular"
1474 msgid "GEOM_SKETCHER_TAN"
1477 msgid "GEOM_SKETCHER_VXVY"
1480 msgid "GEOM_SKETCHER_LENGTH"
1483 msgid "GEOM_SKETCHER_X"
1486 msgid "GEOM_SKETCHER_Y"
1489 msgid "GEOM_SKETCHER_X2"
1492 msgid "GEOM_SKETCHER_Y2"
1495 msgid "GEOM_SKETCHER_X3"
1498 msgid "GEOM_SKETCHER_Y3"
1501 msgid "GEOM_SKETCHER_DX2"
1504 msgid "GEOM_SKETCHER_DY2"
1507 msgid "GEOM_SKETCHER_VX2"
1510 msgid "GEOM_SKETCHER_VY2"
1513 msgid "GEOM_SKETCHER_LENGTH2"
1516 msgid "GEOM_SKETCHER_ANGLE2"
1519 msgid "GEOM_SKETCHER_RADIUS2"
1522 msgid "GEOM_SKETCHER_UNDO"
1525 msgid "GEOM_SKETCHER_APPLY"
1528 msgid "GEOM_SKETCHER_VALUES"
1531 msgid "GEOM_SKETCHER_TYPE"
1534 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1535 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1537 msgid "GEOM_FILLET_ABORT"
1538 msgstr "Fillet can't be computed with radius %1"
1540 msgid "GEOM_CHAMFER_ABORT"
1541 msgstr "Chamfer can't be computed with %1 and %2"
1543 msgid "GEOM_3_POINTS"
1546 msgid "GEOM_CENTER_2POINTS"
1547 msgstr "Center and two points"
1558 msgid "GEOM_CREATE_COPY"
1559 msgstr "Create a copy"
1561 msgid "GEOM_CREATE_SINGLE_SOLID"
1562 msgstr "Create a single solid"
1567 msgid "GEOM_ERROR_STATUS"
1568 msgstr "Operation status"
1570 msgid "GEOM_ELLIPSE_ERROR_1"
1571 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1576 msgid "GEOM_POLYLINE"
1582 msgid "GEOM_CURVE_TITLE"
1583 msgstr "Curve Construction"
1585 # ShapeProcessDlg.cxx
1586 msgid "GEOM_SHAPEPROCESS_TITLE"
1587 msgstr "Shape Processing"
1592 msgid "GEOM_SELECTED_OBJECTS"
1593 msgstr "Selected objects"
1595 msgid "GEOM_OPERATIONS"
1598 msgid "GEOM_PARAMETERS"
1601 msgid "GEOM_FixShape"
1604 msgid "GEOM_FixFaceSize"
1605 msgstr "FixFaceSize"
1607 msgid "GEOM_DropSmallEdges"
1608 msgstr "DropSmallEdges"
1610 msgid "GEOM_SplitAngle"
1613 msgid "GEOM_SplitClosedFaces"
1614 msgstr "SplitClosedFaces"
1616 msgid "GEOM_SplitContinuity"
1617 msgstr "SplitContinuity"
1619 msgid "GEOM_BSplineRestriction"
1620 msgstr "BSplineRestriction"
1622 msgid "GEOM_ToBezier"
1625 msgid "GEOM_SameParameter"
1626 msgstr "SameParameter"
1628 msgid "GEOM_3D_TOLERANCE"
1629 msgstr "3D tolerance"
1631 msgid "GEOM_MAX_3D_TOLERANCE"
1632 msgstr "Max 3D tolerance"
1634 msgid "GEOM_MAX_TOLERANCE"
1635 msgstr "Max tolerance"
1637 msgid "GEOM_ANGLE_1"
1640 msgid "GEOM_NUM_SPLIT_POINTS"
1641 msgstr "Number of splitting points"
1643 msgid "GEOM_SURFACE_CONTINUTY"
1644 msgstr "Surface continuity"
1646 msgid "GEOM_CURVE_CONTINUTY"
1647 msgstr "Curve continuity"
1649 msgid "GEOM_SURFACE_MODE"
1650 msgstr "Surface mode"
1652 msgid "GEOM_3D_CURVE_MODE"
1653 msgstr "3D curve mode"
1655 msgid "GEOM_2D_CURVE_MODE"
1656 msgstr "2D curve mode"
1658 msgid "GEOM_2D_TOLERANCE"
1659 msgstr "2D tolerance"
1661 msgid "GEOM_REQUIRED_DEGREE"
1662 msgstr "Required degree"
1664 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1665 msgstr "Required number of segments"
1667 msgid "GEOM_3D_CONTINUTY"
1668 msgstr "3D continuity"
1670 msgid "GEOM_2D_CONTINUTY"
1671 msgstr "2D continuity"
1673 msgid "GEOM_CLOSECONTOUR_TITLE"
1674 msgstr "Close contour"
1676 msgid "GEOM_ERR_LIB_NOT_FOUND"
1677 msgstr "GUI library corresponding to the user action can not be found or loaded"
1679 msgid "OperationGUI_ChamferDlg::FACE_1"
1682 msgid "OperationGUI_ChamferDlg::FACE_2"
1685 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1686 msgstr "Selected faces"
1688 msgid "OperationGUI_ChamferDlg::D"
1691 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1692 msgstr "Selected edges"
1694 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1695 msgstr "Selected faces"
1697 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1698 msgstr "Suppress internal wires"
1700 msgid "GEOM_INTERNAL_WIRES"
1701 msgstr "Internal wires"
1703 msgid "GEOM_SELECTED_FACE"
1704 msgstr "Selected face"
1706 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1707 msgstr "Remove all internal wires"
1709 msgid "GEOM_REMOVE_HOLES_TITLE"
1710 msgstr "Suppress holes"
1712 msgid "GEOM_SELECTED_SHAPE"
1713 msgstr "Selected shape"
1715 msgid "GEOM_REMOVE_ALL_HOLES"
1716 msgstr "Remove all holes"
1721 msgid "GEOM_WIRES_TO_REMOVE"
1722 msgstr "Wires to remove"
1727 msgid "GEOM_FREE_BOUNDARIES"
1728 msgstr "Free boundaries"
1730 msgid "GEOM_FREE_FACES"
1733 msgid "GEOM_CHANGE_ORIENTATION_TITLE"
1734 msgstr "Change orientation"
1736 msgid "GEOM_CHANGE_ORIENTATION"
1737 msgstr "Objects to change orientation"
1739 msgid "GEOM_REMOVE_EXTRA_EDGES_TITLE"
1740 msgstr "Remove extra edges"
1742 msgid "GEOM_REMOVE_EXTRA_EDGES"
1743 msgstr "Object to remove extra edges"
1745 msgid "GEOM_BY_PARAMETER"
1746 msgstr "By parameter"
1748 msgid "GEOM_BY_LENGTH"
1751 msgid "GEOM_DIVIDE_EDGE_TITLE"
1752 msgstr "Addition of point"
1754 msgid "GEOM_ADD_POINT"
1760 msgid "GEOM_MARKER_TITLE"
1761 msgstr "Create marker"
1766 msgid "GEOM_TRIHEDRON"
1769 msgid "GEOM_FREE_BOUNDS_MSG"
1770 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1772 msgid "GEOM_FREE_BOUNDS_ERROR"
1773 msgstr "Object is not selected"
1775 msgid "GEOM_FREE_BOUNDS_TLT"
1776 msgstr "Free boundary detection"
1778 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1779 msgstr "Check free boundaries"
1781 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1782 msgstr "Free boundaries"
1784 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1785 msgstr "Number of closed free boundaries: "
1787 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1788 msgstr "Number of open free boundaries: "
1790 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1791 msgstr "Please, select at least one Shape Process operation to proceed."
1793 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1794 msgstr "Please, select a geometrical object for Shape Processing."
1796 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1797 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1799 msgid "MeasureGUI_PointDlg::POINT"
1802 msgid "MeasureGUI_PointDlg::X"
1805 msgid "MeasureGUI_PointDlg::Y"
1808 msgid "MeasureGUI_PointDlg::Z"
1811 msgid "MeasureGUI_PointDlg::CAPTION"
1812 msgstr "Point Coordinates"
1814 msgid "MeasureGUI_PointDlg::COORDINATES"
1815 msgstr "Point and its coordinates"
1817 msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
1818 msgstr "Check also geometry"
1820 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1821 msgstr "Create Group"
1823 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1826 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1829 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1832 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1833 msgstr "Main Shape And Sub-Shapes"
1835 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1838 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1839 msgstr "Select Sub-Shapes"
1841 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1844 msgid "GroupGUI_GroupDlg::ADD"
1847 msgid "GroupGUI_GroupDlg::REMOVE"
1850 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1853 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1854 msgstr "Please, specify a non-empty group name"
1856 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1857 msgstr "Please, select a main shape"
1859 msgid "GroupGUI_GroupDlg::NO_GROUP"
1860 msgstr "Please, select a group to edit"
1862 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1863 msgstr "Please, select one or more sub-shapes to put into the group"
1865 msgid "GroupGUI::NO_GROUP"
1866 msgstr "Please, select a group to edit"
1873 msgid "WRN_NOT_IMPLEMENTED"
1874 msgstr "Sorry, this functionality is not yet implemented"
1876 ### BlocksGUI_TrsfDlg ###
1878 msgid "BlocksGUI_TrsfDlg::FACE_1"
1881 msgid "BlocksGUI_TrsfDlg::FACE_2"
1884 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1887 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1890 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1893 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1896 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1897 msgstr "Block Multi-Transformation"
1899 msgid "GEOM_BLOCK_MULTITRSF"
1900 msgstr "Block Multi-Transformation"
1902 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1903 msgstr "Multi-Transformation Simple"
1905 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1906 msgstr "Multi-Transformation Double"
1908 ### BlocksGUI_QuadFaceDlg ###
1910 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1913 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1916 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1919 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1922 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1925 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1928 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1931 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1934 msgid "GEOM_QUAD_FACE_TITLE"
1935 msgstr "Quadrangle Face Construction"
1937 msgid "GEOM_QUAD_FACE"
1938 msgstr "Quadrangle Face"
1940 ### BlocksGUI_BlockDlg ###
1942 msgid "BlocksGUI_BlockDlg::FACE_1"
1945 msgid "BlocksGUI_BlockDlg::FACE_2"
1948 msgid "BlocksGUI_BlockDlg::FACE_3"
1951 msgid "BlocksGUI_BlockDlg::FACE_4"
1954 msgid "BlocksGUI_BlockDlg::FACE_5"
1957 msgid "BlocksGUI_BlockDlg::FACE_6"
1960 msgid "GEOM_BLOCK_TITLE"
1961 msgstr "Hexahedral Solid Construction"
1964 msgstr "Hexahedral Solid"
1966 #==============================================================================
1968 msgid "BasicGUI_MarkerDlg::CAPTION"
1969 msgstr "Local CS Construction"
1971 msgid "BasicGUI_MarkerDlg::LOCALCS"
1972 msgstr "Local coordinate system"
1974 msgid "BasicGUI_MarkerDlg::ORIGIN"
1975 msgstr "Coordinates of origin"
1977 msgid "BasicGUI_MarkerDlg::XDIR"
1978 msgstr "X axis direction"
1980 msgid "BasicGUI_MarkerDlg::YDIR"
1981 msgstr "Y axis direction"
1983 msgid "BasicGUI_MarkerDlg::DX"
1986 msgid "BasicGUI_MarkerDlg::DY"
1989 msgid "BasicGUI_MarkerDlg::DZ"
1992 msgid "BasicGUI_MarkerDlg::LCS_NAME"
1995 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
1996 msgstr "Coordinate system axes cannot be parallel"
2028 ### BlocksGUI_ExplodeDlg ###
2030 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
2031 msgstr "Min. nb. faces"
2033 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
2034 msgstr "Max. nb. faces"
2036 msgid "GEOM_BLOCK_EXPLODE_TITLE"
2037 msgstr "Sub Blocks Selection"
2039 msgid "GEOM_BLOCK_EXPLODE"
2042 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
2043 msgstr "There are %1 specified blocks and NO other solids"
2045 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
2046 msgstr "There are %1 specified blocks and some other solids"
2048 msgid "ShHealOper_NotError_msg"
2049 msgstr "Shape Healing algorithm has done no modification of the original shape"
2051 msgid "ShHealOper_InvalidParameters_msg"
2052 msgstr "Incorrect parameters for Shape Healing algorithm"
2054 msgid "ShHealOper_ErrorExecution_msg"
2055 msgstr "Shape Healing algorithm failed"
2057 msgid "GEOM_GLUE_TITLE"
2063 msgid "RepairGUI_GlueDlg::SELECT_FACES"
2064 msgstr "Select Faces"
2066 msgid "RepairGUI_GlueDlg::FACES_FOR_GLUING_ARE_DETECTED"
2067 msgstr "There are %1 face(s) that can be glued. They are coloured on the screen with red colour\nPlease close this message box and select faces for glueing"
2069 msgid "RepairGUI_GlueDlg::GLUE_FACES"
2072 msgid "RepairGUI_GlueDlg::THERE_ARE_NO_FACES_FOR_GLUING"
2073 msgstr "There are no faces for gluing"
2075 msgid "GEOM_FREE_FACES_TITLE"
2078 ### New object names for RepairGUI ###
2079 msgid "SEWING_NEW_OBJ_NAME"
2082 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
2085 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
2086 msgstr "CloseContour"
2088 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
2089 msgstr "SupressHoles"
2091 msgid "GLUE_NEW_OBJ_NAME"
2094 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
2095 msgstr "RemoveIntWires"
2097 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
2098 msgstr "ProcessShape"
2100 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
2101 msgstr "SupressFaces"
2103 msgid "CHANGE_ORIENTATION_NEW_OBJ_NAME"
2106 msgid "REMOVE_EXTRA_EDGES_NEW_OBJ_NAME"
2107 msgstr "NoExtraEdges"
2109 msgid "NON_GEOM_OBJECTS_SELECTED"
2110 msgstr "There are objects selected which do not belong to %1 component."
2112 msgid "GEOM_PROPAGATE_TITLE"
2115 msgid "GEOM_PROPAGATE"
2118 ### Menu of GEOM module ###
2123 msgstr "Import geometry from BREP file"
2129 msgstr "Import geometry from BREP file"
2132 msgstr "Export geometry to BREP file"
2138 msgstr "Export geometry to BREP file"
2144 msgstr "Delete object"
2150 msgstr "Delete object"
2152 msgid "MEN_NEW_ENTITY"
2159 msgstr "Create a point"
2165 msgstr "Create a point"
2168 msgstr "Create a line"
2174 msgstr "Create a line"
2177 msgstr "Create a circle"
2183 msgstr "Create a circle"
2186 msgstr "Create an ellipse"
2192 msgstr "Create an ellipse"
2195 msgstr "Create an arc"
2201 msgstr "Create an arc"
2204 msgstr "Create a curve"
2210 msgstr "Create a curve"
2213 msgstr "Create a vector"
2219 msgstr "Create a vector"
2222 msgstr "Create a plane"
2228 msgstr "Create a plane"
2230 msgid "TOP_WORK_PLANE"
2231 msgstr "Create a working plane"
2233 msgid "MEN_WORK_PLANE"
2234 msgstr "Working plane"
2236 msgid "STB_WORK_PLANE"
2237 msgstr "Create a working plane"
2239 msgid "TOP_LOCAL_CS"
2240 msgstr "Create a local coordinate system"
2242 msgid "MEN_LOCAL_CS"
2243 msgstr "Local coordinate system"
2245 msgid "STB_LOCAL_CS"
2246 msgstr "Create a local coordinate system"
2248 msgid "MEN_PRIMITIVES"
2252 msgstr "Create a box"
2258 msgstr "Create a box"
2260 msgid "TOP_CYLINDER"
2261 msgstr "Create a cylinder"
2263 msgid "MEN_CYLINDER"
2266 msgid "STB_CYLINDER"
2267 msgstr "Create a cylinder"
2270 msgstr "Create a sphere"
2276 msgstr "Create a sphere"
2279 msgstr "Create a torus"
2285 msgstr "Create a torus"
2288 msgstr "Create a cone"
2294 msgstr "Create a cone"
2296 msgid "MEN_GENERATION"
2299 msgid "TOP_EXTRUSION"
2300 msgstr "Create an extrusion"
2302 msgid "MEN_EXTRUSION"
2305 msgid "STB_EXTRUSION"
2306 msgstr "Create an extrusion"
2308 msgid "TOP_REVOLUTION"
2309 msgstr "Create a revolution"
2311 msgid "MEN_REVOLUTION"
2314 msgid "STB_REVOLUTION"
2315 msgstr "Create a revolution"
2318 msgstr "Create a filling"
2324 msgstr "Create a filling"
2327 msgstr "Extrusion along a path"
2330 msgstr "Extrusion along a path"
2333 msgstr "Create a shape by Extrusion along a path"
2338 msgid "TOP_GROUP_CREATE"
2339 msgstr "Create a group"
2341 msgid "MEN_GROUP_CREATE"
2344 msgid "STB_GROUP_CREATE"
2345 msgstr "Create a group"
2347 msgid "TOP_GROUP_EDIT"
2348 msgstr "Edit a group"
2350 msgid "MEN_GROUP_EDIT"
2353 msgid "STB_GROUP_EDIT"
2354 msgstr "Edit a group"
2360 msgstr "Quadrangle Face"
2363 msgstr "Quadrangle Face"
2366 msgstr "Quadrangle Face"
2368 msgid "TOP_HEX_SOLID"
2369 msgstr "Hexahedral Solid"
2371 msgid "MEN_HEX_SOLID"
2372 msgstr "Hexahedral Solid"
2374 msgid "STB_HEX_SOLID"
2375 msgstr "Hexahedral Solid"
2399 msgstr "Build an edge"
2405 msgstr "Build an edge"
2408 msgstr "Build a wire"
2414 msgstr "Build a wire"
2417 msgstr "Build a face"
2423 msgstr "Build a face from wires and/or edges"
2426 msgstr "Build a shell"
2432 msgstr "Build a shell"
2435 msgstr "Build a solid"
2441 msgstr "Build a solid"
2443 msgid "TOP_COMPOUND"
2444 msgstr "Build a compound"
2446 msgid "MEN_COMPOUND"
2449 msgid "STB_COMPOUND"
2450 msgstr "Build a compound"
2452 msgid "MEN_OPERATIONS"
2494 msgid "MEN_TRANSFORMATION"
2495 msgstr "Transformation"
2497 msgid "TOP_TRANSLATION"
2498 msgstr "Translation"
2500 msgid "MEN_TRANSLATION"
2501 msgstr "Translation"
2503 msgid "STB_TRANSLATION"
2504 msgstr "Translation"
2506 msgid "TOP_ROTATION"
2509 msgid "MEN_ROTATION"
2512 msgid "STB_ROTATION"
2515 msgid "TOP_MODIFY_LOCATION"
2516 msgstr "Modify the Location"
2518 msgid "MEN_MODIFY_LOCATION"
2519 msgstr "Modify the Location"
2521 msgid "STB_MODIFY_LOCATION"
2522 msgstr "Modify the Location"
2525 msgstr "Mirror image"
2528 msgstr "Mirror image"
2531 msgstr "Mirror image"
2534 msgstr "Scale transform"
2537 msgstr "Scale transform"
2540 msgstr "Scale transform"
2543 msgstr "Offset surface"
2546 msgstr "Offset surface"
2549 msgstr "Offset surface"
2551 msgid "TOP_MUL_TRANSLATION"
2552 msgstr "Multi-Translation"
2554 msgid "MEN_MUL_TRANSLATION"
2555 msgstr "Multi-Translation"
2557 msgid "STB_MUL_TRANSLATION"
2558 msgstr "Multi-Translation"
2560 msgid "TOP_MUL_ROTATION"
2561 msgstr "Multi-Rotation"
2563 msgid "MEN_MUL_ROTATION"
2564 msgstr "Multi-Rotation"
2566 msgid "STB_MUL_ROTATION"
2567 msgstr "Multi-Rotation"
2569 msgid "TOP_PARTITION"
2572 msgid "MEN_PARTITION"
2575 msgid "STB_PARTITION"
2578 msgid "TOP_ARCHIMEDE"
2581 msgid "MEN_ARCHIMEDE"
2584 msgid "STB_ARCHIMEDE"
2605 msgid "TOP_CLIPPING"
2606 msgstr "Clipping range"
2608 msgid "MEN_CLIPPING"
2609 msgstr "Clipping range"
2611 msgid "STB_CLIPPING"
2612 msgstr "Clipping range"
2614 msgid "TOP_MUL_TRANSFORM"
2615 msgstr "Multi-transformation"
2617 msgid "MEN_MUL_TRANSFORM"
2618 msgstr "Multi-transformation"
2620 msgid "STB_MUL_TRANSFORM"
2621 msgstr "Multi-transformation"
2623 msgid "TOP_EXPLODE_BLOCKS"
2624 msgstr "Explode on Blocks"
2626 msgid "MEN_EXPLODE_BLOCKS"
2627 msgstr "Explode on Blocks"
2629 msgid "STB_EXPLODE_BLOCKS"
2630 msgstr "Explode on Blocks"
2632 msgid "TOP_PROPAGATE"
2635 msgid "MEN_PROPAGATE"
2638 msgid "STB_PROPAGATE"
2644 msgid "TOP_SHAPE_PROCESS"
2645 msgstr "Perform shape processing"
2647 msgid "MEN_SHAPE_PROCESS"
2648 msgstr "Shape processing"
2650 msgid "STB_SHAPE_PROCESS"
2651 msgstr "Perform shape processing "
2653 msgid "TOP_SUPPRESS_FACES"
2654 msgstr "Perform suppress faces"
2656 msgid "MEN_SUPPRESS_FACES"
2657 msgstr "Suppress faces"
2659 msgid "STB_SUPPRESS_FACES"
2660 msgstr "Perform suppress faces"
2662 msgid "TOP_CLOSE_CONTOUR"
2663 msgstr "Perform close contour"
2665 msgid "MEN_CLOSE_CONTOUR"
2666 msgstr "Close contour"
2668 msgid "STB_CLOSE_CONTOUR"
2669 msgstr "Perform close contour"
2671 msgid "TOP_SUPPRESS_INT_WIRES"
2672 msgstr "Perform suppress internal wires"
2674 msgid "MEN_SUPPRESS_INT_WIRES"
2675 msgstr "Suppress internal wires"
2677 msgid "STB_SUPPRESS_INT_WIRES"
2678 msgstr "Perform suppress internal wires"
2680 msgid "TOP_SUPPERSS_HOLES"
2681 msgstr "Perform suppress holes"
2683 msgid "MEN_SUPPERSS_HOLES"
2684 msgstr "Suppress holes"
2686 msgid "STB_SUPPERSS_HOLES"
2687 msgstr "Perform suppress holes"
2690 msgstr "Perform sewing"
2696 msgstr "Perform sewing"
2698 msgid "TOP_GLUE_FACES"
2699 msgstr "Perform glue faces"
2701 msgid "MEN_GLUE_FACES"
2704 msgid "STB_GLUE_FACES"
2705 msgstr "Perform glue faces"
2707 msgid "TOP_POINT_ON_EDGE"
2708 msgstr "Add point on edge"
2710 msgid "MEN_POINT_ON_EDGE"
2711 msgstr "Add point on edge"
2713 msgid "STB_POINT_ON_EDGE"
2714 msgstr "Add point on edge"
2716 msgid "TOP_CHECK_FREE_BNDS"
2717 msgstr "Check free boundaries"
2719 msgid "MEN_CHECK_FREE_BNDS"
2720 msgstr "Check free boundaries"
2722 msgid "STB_CHECK_FREE_BNDS"
2723 msgstr "Check free boundaries"
2725 msgid "TOP_CHECK_FREE_FACES"
2726 msgstr "Check free faces"
2728 msgid "MEN_CHECK_FREE_FACES"
2729 msgstr "Check free faces"
2731 msgid "STB_CHECK_FREE_FACES"
2732 msgstr "Check free faces"
2734 msgid "TOP_CHANGE_ORIENTATION"
2735 msgstr "Change orientation"
2737 msgid "MEN_CHANGE_ORIENTATION"
2738 msgstr "Change orientation"
2740 msgid "STB_CHANGE_ORIENTATION"
2741 msgstr "Change orientation"
2743 msgid "TOP_REMOVE_EXTRA_EDGES"
2744 msgstr "Remove extra edges"
2746 msgid "MEN_REMOVE_EXTRA_EDGES"
2747 msgstr "Remove extra edges"
2749 msgid "STB_REMOVE_EXTRA_EDGES"
2750 msgstr "Remove extra edges"
2752 msgid "MEN_MEASURES"
2755 msgid "TOP_POINT_COORDS"
2756 msgstr "Point coordinates"
2758 msgid "MEN_POINT_COORDS"
2759 msgstr "Point coordinates"
2761 msgid "STB_POINT_COORDS"
2762 msgstr "Point coordinates"
2764 msgid "TOP_BASIC_PROPS"
2765 msgstr "Basic properties"
2767 msgid "MEN_BASIC_PROPS"
2768 msgstr "Basic properties"
2770 msgid "STB_BASIC_PROPS"
2771 msgstr "Basic properties"
2773 msgid "TOP_MASS_CENTER"
2774 msgstr "Compute center of mass"
2776 msgid "MEN_MASS_CENTER"
2777 msgstr "Center of mass"
2779 msgid "STB_MASS_CENTER"
2780 msgstr "Compute center of mass"
2783 msgstr "Compute normal to a face"
2786 msgstr "Normal to a face"
2789 msgstr "Compute normal to a face in a point (optional)"
2792 msgstr "Compute intertia"
2798 msgstr "Compute intertia"
2800 msgid "MEN_DIMENSIONS"
2804 msgstr "Compute bounding box"
2807 msgstr "Bounding box"
2810 msgstr "Compute bounding box"
2812 msgid "TOP_MIN_DIST"
2813 msgstr "Compute minimum distance"
2815 msgid "MEN_MIN_DIST"
2816 msgstr "Min distance"
2818 msgid "STB_MIN_DIST"
2819 msgstr "Compute minimum distance"
2821 msgid "TOP_MEASURE_ANGLE"
2822 msgstr "Compute angle"
2824 msgid "MEN_MEASURE_ANGLE"
2827 msgid "STB_MEASURE_ANGLE"
2828 msgstr "Compute angle between two lines or linear edges"
2830 msgid "TOP_TOLERANCE"
2831 msgstr "Compute tolerance"
2833 msgid "MEN_TOLERANCE"
2834 msgstr "Compute tolerance"
2836 msgid "STB_TOLERANCE"
2837 msgstr "Compute tolerance"
2857 msgid "TOP_CHECK_COMPOUND"
2858 msgstr "Check compound of blocks"
2860 msgid "MEN_CHECK_COMPOUND"
2861 msgstr "Check compound of blocks"
2863 msgid "STB_CHECK_COMPOUND"
2864 msgstr "Check compound of blocks"
2869 msgid "TOP_CHECK_GEOMETRY"
2870 msgstr "Check Geometry"
2872 msgid "MEN_CHECK_GEOMETRY"
2873 msgstr "Check Geometry"
2875 msgid "STB_CHECK_GEOMETRY"
2876 msgstr "Check Geometry"
2878 msgid "MEN_PREFERENCES"
2879 msgstr "Preferences"
2881 msgid "MEN_PREFERENCES_GEOM"
2884 msgid "TOP_SHADING_COLOR"
2885 msgstr "Set shading color"
2887 msgid "MEN_SHADING_COLOR"
2888 msgstr "Shading color"
2890 msgid "STB_SHADING_COLOR"
2891 msgstr "Set shading color"
2894 msgstr "Set number of isolines"
2900 msgstr "Set number of isolines"
2902 msgid "TOP_STEP_VALUE"
2903 msgstr "Set step value"
2905 msgid "MEN_STEP_VALUE"
2908 msgid "STB_STEP_VALUE"
2909 msgstr "Set step value"
2914 msgid "MEN_DISPLAY_MODE"
2915 msgstr "Display mode"
2923 msgid "MEN_WIREFRAME"
2929 msgid "TOP_DISPLAY_ALL"
2932 msgid "MEN_DISPLAY_ALL"
2935 msgid "STB_DISPLAY_ALL"
2938 msgid "TOP_ERASE_ALL"
2941 msgid "MEN_ERASE_ALL"
2944 msgid "STB_ERASE_ALL"
2954 msgstr "Show object(s)"
2956 msgid "TOP_DISPLAY_ONLY"
2959 msgid "MEN_DISPLAY_ONLY"
2962 msgid "STB_DISPLAY_ONLY"
2972 msgstr "Hide object(s)"
2974 msgid "TOP_POP_RENAME"
2977 msgid "MEN_POP_RENAME"
2980 msgid "STB_POP_RENAME"
2983 msgid "TOP_POP_WIREFRAME"
2986 msgid "MEN_POP_WIREFRAME"
2989 msgid "STB_POP_WIREFRAME"
2992 msgid "TOP_POP_SHADING"
2995 msgid "MEN_POP_SHADING"
2998 msgid "STB_POP_SHADING"
3001 msgid "TOP_POP_AUTO_COLOR"
3004 msgid "MEN_POP_AUTO_COLOR"
3007 msgid "STB_POP_AUTO_COLOR"
3010 msgid "TOP_POP_DISABLE_AUTO_COLOR"
3011 msgstr "Disable auto color"
3013 msgid "MEN_POP_DISABLE_AUTO_COLOR"
3014 msgstr "Disable auto color"
3016 msgid "STB_POP_DISABLE_AUTO_COLOR"
3017 msgstr "Disable auto color"
3019 msgid "TOP_POP_COLOR"
3022 msgid "MEN_POP_COLOR"
3025 msgid "STB_POP_COLOR"
3028 msgid "TOP_POP_TRANSPARENCY"
3029 msgstr "Transparency"
3031 msgid "MEN_POP_TRANSPARENCY"
3032 msgstr "Transparency"
3034 msgid "STB_POP_TRANSPARENCY"
3035 msgstr "Transparency"
3037 msgid "TOP_POP_ISOS"
3040 msgid "MEN_POP_ISOS"
3043 msgid "STB_POP_ISOS"
3046 msgid "TOP_POP_CREATE_GROUP"
3047 msgstr "Create Group"
3049 msgid "MEN_POP_CREATE_GROUP"
3050 msgstr "Create Group"
3052 msgid "STB_POP_CREATE_GROUP"
3053 msgstr "Create Group"
3058 msgid "TOOL_PRIMITIVES"
3061 msgid "TOOL_BOOLEAN"
3062 msgstr "Boolean operations"
3064 msgid "TOOL_GENERATION"
3067 msgid "TOOL_TRANSFORMATION"
3068 msgstr "Transformation"
3076 msgid "GEOM_RESULT_NAME_GRP"
3077 msgstr "Result name"
3079 msgid "GEOM_RESULT_NAME_LBL"
3082 msgid "GEOM_ERR_GET_ENGINE"
3083 msgstr "Failed to obtain GEOM Engine component. Reload Geometry module and try again."
3085 msgid "PREF_GROUP_OCCVIEWER"
3086 msgstr "OCC Viewer 3d"
3088 msgid "PREF_GROUP_GENERAL"
3091 msgid "PREF_GROUP_VERTEX"
3092 msgstr "Marker of Points"
3094 msgid "PREF_SHADING_COLOR"
3095 msgstr "Default shading color"
3097 msgid "PREF_WIREFRAME_COLOR"
3098 msgstr "Default wireframe color"
3100 msgid "PREF_FREE_BOUND_COLOR"
3101 msgstr "Color of free boundaries"
3103 msgid "PREF_LINE_COLOR"
3104 msgstr "Color of edges, vectors, wires"
3106 msgid "PREF_POINT_COLOR"
3107 msgstr "Color of points"
3109 msgid "PREF_ISOS_COLOR"
3110 msgstr "Color of isolines"
3112 msgid "PREF_STEP_VALUE"
3113 msgstr "Step value for spin boxes"
3115 msgid "PREF_DISPLAY_MODE"
3116 msgstr "Default display mode"
3118 msgid "PREF_TAB_SETTINGS"
3121 msgid "PREF_TYPE_OF_MARKER"
3124 msgid "PREF_MARKER_SCALE"
3154 msgid "ERROR_SHAPE_TYPE"
3155 msgstr "Object of incorrect type selected!\nPlease, select face, shell or solid and try again"
3158 msgstr "Selected object has been used to create another one\n It can't be deleted "
3160 msgid "MEN_SELECT_ONLY"
3161 msgstr "Select Only"
3163 msgid "STB_VERTEX_SEL_ONLY"
3164 msgstr "Select only a Points"
3166 msgid "STB_EDGE_SEL_ONLY"
3167 msgstr "Select only a Edges"
3169 msgid "STB_WIRE_SEL_ONLY"
3170 msgstr "Select only a Wires"
3172 msgid "STB_FACE_SEL_ONLY"
3173 msgstr "Select only a Faces"
3175 msgid "STB_SHELL_SEL_ONLY"
3176 msgstr "Select only a Shells"
3178 msgid "STB_SOLID_SEL_ONLY"
3179 msgstr "Select only a Solids"
3181 msgid "STB_COMPOUND_SEL_ONLY"
3182 msgstr "Select only a Compounds"
3184 msgid "STB_ALL_SEL_ONLY"
3185 msgstr "Select all Objects"
3187 msgid "MEN_VERTEX_SEL_ONLY"
3190 msgid "MEN_EDGE_SEL_ONLY"
3193 msgid "MEN_WIRE_SEL_ONLY"
3196 msgid "MEN_FACE_SEL_ONLY"
3199 msgid "MEN_SHELL_SEL_ONLY"
3202 msgid "MEN_SOLID_SEL_ONLY"
3205 msgid "MEN_COMPOUND_SEL_ONLY"
3208 msgid "MEN_ALL_SEL_ONLY"