1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: 2003-10-27 17:32+0100\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
65 msgid "GEOM_BUT_EXPLODE"
69 #==============================================================================
72 #: GeometryGUI.cxx:563
73 msgid "GEOM_INF_LOADED"
74 msgstr "File %1 loaded."
77 #==============================================================================
80 #: GeometryGUI.cxx:3069
81 msgid "GEOM_PRP_COMMAND"
82 msgstr "No command associated with this id = %1."
84 #: GeometryGUI.cxx:4977
85 msgid "GEOM_PRP_ABORT"
86 msgstr "Operation aborted"
88 #: GeometryGUI.cxx:5058
90 msgstr "Operation done"
92 #: GeometryGUI.cxx:3717
93 msgid "GEOM_PRP_LOADING"
94 msgstr "Loading %1 ..."
96 #: GeometryGUI.cxx:1412
97 msgid "GEOM_PRP_NULLSHAPE"
98 msgstr "Error, null or inappropriate shape !"
100 #: GeometryGUI.cxx:5072
101 msgid "GEOM_PRP_READY"
104 #: GeometryGUI.cxx:1690
105 msgid "GEOM_PRP_SELECT_SUBSHAPES"
106 msgstr "Select Sub Shapes"
108 msgid "GEOM_PRP_EXPORT"
109 msgstr "Exporting geometry to %1 ..."
112 msgstr "Confirm operation"
114 msgid "GEOM_CONFIRM_INFO"
115 msgstr "Shape contains %1 sub shapes !"
118 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
119 msgstr "Not allowed in VTK viewer"
121 #: GeometryGUI.cxx:1690
122 msgid "GEOM_PRP_SHAPE_IN_STUDY"
123 msgstr "Main shape must be in the study before"
125 #: GeometryGUI.cxx:1690
126 msgid "GEOM_PRP_SELECT_EDGE"
127 msgstr "Select edges and click on Apply"
129 #: GeometryGUI.cxx:1690
130 msgid "GEOM_PRP_SELECT_FACE"
131 msgstr "Select faces to suppress and click on Ok/Apply"
133 #: GeometryGUI.cxx:1690
134 msgid "GEOM_PRP_SELECT_FIRST"
135 msgstr "Select main shape first"
137 #: GeometryGUI.cxx:1690
138 msgid "GEOM_PRP_MIN_DIST"
139 msgstr "Min Distance not computed"
141 msgid "GEOM_STUDY_LOCKED"
142 msgstr "The active study is locked and therefore cannot be modified"
145 #==============================================================================
148 #: GeometryGUI.cxx:3698
149 msgid "GEOM_MEN_ALL_FILES"
150 msgstr "All Files ( * )"
152 #: GeometryGUI.cxx:4389
153 msgid "GEOM_MEN_ANGLE"
156 #: GeometryGUI.cxx:3941
157 msgid "GEOM_MEN_COMPONENT"
160 #: GeometryGUI.cxx:4389
161 msgid "GEOM_MEN_ENTER_ANGLE"
162 msgstr "Enter An Angle In Degrees"
164 #: GeometryGUI.cxx:3758
165 msgid "GEOM_MEN_EXPORT"
168 #: GeometryGUI.cxx:3648
169 msgid "GEOM_MEN_IMPORT"
172 #: GeometryGUI.cxx:2931
173 msgid "GEOM_MEN_ISOS"
174 msgstr "Select Number Of Isos"
176 #: GeometryGUI.cxx:4278
177 msgid "GEOM_MEN_POPUP_NAME"
180 #: GeometryGUI.cxx:4414
181 msgid "GEOM_MEN_SKETCHER_X"
182 msgstr "Enter a length to set X"
184 #: GeometryGUI.cxx:4438
185 msgid "GEOM_MEN_SKETCHER_Y"
186 msgstr "Enter a length to set Y"
188 #: GeometryGUI.cxx:2898
189 msgid "GEOM_MEN_TRANSPARENCY"
190 msgstr "Transparency"
192 #: GeometryGUI.cxx:4413
196 #: GeometryGUI.cxx:4437
200 #: GeometryGUI_NbIsosDlg.cxx:36
201 msgid "GEOM_MEN_ISOU"
204 #: GeometryGUI_NbIsosDlg.cxx:53
205 msgid "GEOM_MEN_ISOV"
208 #: GeometryGUI_TransparencyDlg.cxx:31
209 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
210 msgstr "Transparency :"
212 msgid "GEOM_MEN_STEP_LABEL"
215 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
216 msgstr "Identical names : select by mouse !"
218 msgid "GEOM_NAME_INCORRECT"
219 msgstr "Object name not found"
221 msgid "GEOM_INCORRECT_INPUT"
222 msgstr "Incorrect input data!"
225 #==============================================================================
228 #: GeometryGUI.cxx:892
229 msgid "GEOM_WRN_RADIUS_NULL"
230 msgstr "Radius is null"
232 #: GeometryGUI.cxx:3854
233 msgid "GEOM_WRN_WARNING"
236 #: GeometryGUI.cxx:3854
237 msgid "GEOM_REALLY_DELETE"
238 msgstr "Do you really want to delete object(s) ?"
241 #==============================================================================
249 msgid "GEOM_MAIN_OBJECT"
253 msgid "GEOM_TOOL_OBJECT"
257 msgid "GEOM_BASE_OBJECT"
261 msgid "GEOM_PATH_OBJECT"
269 msgid "GEOM_OBJECT_I"
273 msgid "GEOM_OBJECT_RESULT"
274 msgstr "Object And Result"
281 msgid "GEOM_BASE_POINT"
285 msgid "GEOM_CENTER_POINT"
286 msgstr "Center Point"
289 msgid "GEOM_DIAGONAL_POINTS"
290 msgstr "Diagonal Points"
293 msgid "GEOM_CENTRAL_POINT"
294 msgstr "Central Point"
305 msgid "GEOM_ARGUMENTS"
317 msgid "GEOM_RADIUS_I"
333 msgid "GEOM_COORDINATES"
345 msgid "GEOM_REVERSE_U"
349 msgid "GEOM_REVERSE_V"
365 msgid "GEOM_VECTOR_LENGTH"
366 msgstr "Vector Length :"
369 msgid "GEOM_REVERSE_VECTOR"
370 msgstr "Reverse Vector"
373 msgid "GEOM_POINT_MIRROR"
374 msgstr "Point Mirror"
377 msgid "GEOM_AXE_MIRROR"
381 msgid "GEOM_PLANE_MIRROR"
382 msgstr "Plane Mirror"
385 msgid "GEOM_FACE_SELECTION"
386 msgstr "Face Selection"
393 msgid "GEOM_WATER_DENSITY"
394 msgstr "Water Density :"
397 msgid "GEOM_MESHING_DEFLECTION"
398 msgstr "Meshing Deflect. :"
401 msgid "GEOM_DIMENSIONS"
405 msgid "GEOM_PRECISION"
409 msgid "GEOM_SELECTION"
413 msgid "GEOM_NB_TIMES"
417 msgid "GEOM_NB_TIMES_U"
418 msgstr "Nb. Times U :"
421 msgid "GEOM_NB_TIMES_V"
422 msgstr "Nb. Times V :"
437 #==============================================================================
441 msgid "GEOM_PARTITION"
444 #Half-space partition
445 msgid "GEOM_PARTITION_HALFSPACE"
446 msgstr "Half-space partition"
449 msgid "GEOM_TOLERANCE"
453 msgid "GEOM_ORIENTATION"
461 msgid "GEOM_REVOLUTION"
465 msgid "GEOM_ROTATION"
469 msgid "GEOM_ARCHIMEDE"
481 msgid "GEOM_DISTANCE"
497 msgid "GEOM_POSITION"
513 msgid "GEOM_TRANSLATION"
518 msgstr "Working Plane"
529 msgid "GEOM_SUB_SHAPE"
533 msgid "GEOM_SUPRESSFACE"
534 msgstr "Supress Face"
545 msgid "GEOM_CHECK_SHAPE"
548 #Check Blocks Compound
549 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
550 msgstr "Check and Improve Blocks Compound"
552 #Check Blocks Compound Errors
553 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
556 #Check Blocks Compound Errors
557 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
558 msgstr "The Compound of Blocks has no errors"
560 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
561 msgstr "The Compound of Blocks has errors"
563 #Check Blocks Compound SubShapes
564 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
565 msgstr "Incriminated Sub-Shapes"
573 msgstr "Bounding Box"
577 msgstr "Center Of Mass"
580 msgid "GEOM_PROPERTIES"
581 msgstr "Basic Properties"
584 msgid "GEOM_MULTITRANSLATION"
585 msgstr "Multi-Translation"
588 msgid "GEOM_MULTIROTATION"
589 msgstr "Multi-Rotation"
592 #==============================================================================
611 msgid "GEOM_ELLIPSE_TITLE"
612 msgstr "Ellipse Construction"
615 msgid "GEOM_RADIUS_MAJOR"
616 msgstr "Major radius :"
619 msgid "GEOM_RADIUS_MINOR"
620 msgstr "Minor radius :"
623 msgid "GEOM_COMPOUND"
627 msgid "GEOM_BLOCKS_COMPOUND"
628 msgstr "BlocksCompound"
631 msgid "GEOM_COMPOUNDSOLID"
639 msgid "GEOM_CYLINDER"
683 msgid "GEOM_SURFCONE"
684 msgstr "Conical Face"
687 msgid "GEOM_SURFCYLINDER"
688 msgstr "Cylindrical Face"
691 msgid "GEOM_SURFSPHERE"
692 msgstr "Spherical Face"
695 msgid "GEOM_SURFTORUS"
696 msgstr "Toroidal Face"
707 msgid "GEOM_VECTOR_U"
711 msgid "GEOM_VECTOR_V"
731 msgstr "Imported_Shape"
734 msgid "GEOM_PARAMETER"
738 #==============================================================================
782 #==============================================================================
786 msgid "GEOM_STEP_TITLE"
787 msgstr "Step value for GUI constructions"
789 #: GeometryGUI_ArcDlg.cxx:45
790 msgid "GEOM_ARC_TITLE"
791 msgstr "Arc Construction"
793 #: GeometryGUI_ArchimedeDlg.cxx:55
794 msgid "GEOM_ARCHIMEDE_TITLE"
795 msgstr "Archimede Construction"
797 #: GeometryGUI_BndBoxDlg.cxx:59
798 msgid "GEOM_BNDBOX_TITLE"
799 msgstr "Bounding Box Informations"
801 #: GeometryGUI_BndBoxDlg.cxx:82
802 msgid "GEOM_BNDBOX_OBJDIM"
803 msgstr "Object And Its Dimensions"
805 #: GeometryGUI_BoxDlg.cxx:50
806 msgid "GEOM_BOX_TITLE"
807 msgstr "Box Construction"
809 #: GeometryGUI_BoxDlg.cxx:50
811 msgstr "Dimensions At Origin"
813 #: GeometryGUI_ChamferDlg.cxx:58
814 msgid "GEOM_CHAMFER_TITLE"
815 msgstr "Chamfer Construction"
817 #: GeometryGUI_ChamferDlg.cxx:58
818 msgid "GEOM_CHAMFER_ALL"
819 msgstr "Chamfer On Whole Shape"
821 #: GeometryGUI_ChamferDlg.cxx:58
822 msgid "GEOM_CHAMFER_EDGES"
823 msgstr "Chamfer On Edges From Shape"
825 #: GeometryGUI_ChamferDlg.cxx:58
826 msgid "GEOM_CHAMFER_FACES"
827 msgstr "Chamfer On Faces From Shape"
829 #: GeometryGUI_CircleDlg.cxx:48
830 msgid "GEOM_CIRCLE_TITLE"
831 msgstr "Circle Construction"
833 #: GeometryGUI_CenterMassDlg.cxx:77
834 msgid "GEOM_CMASS_TITLE"
835 msgstr "Center Of Mass Construction"
837 msgid "GEOM_PLANE_SIZE"
838 msgstr "Size of plane :"
840 #: GeometryGUI_CommonDlg.cxx:47
841 msgid "GEOM_COMMON_TITLE"
842 msgstr "BOOLEAN : Common Of Two Objects"
844 #: GeometryGUI_CompoundDlg.cxx:44
845 msgid "GEOM_COMPOUND_TITLE"
846 msgstr "Create A Compound"
848 #: GeometryGUI_ConeDlg.cxx:49
849 msgid "GEOM_CONE_TITLE"
850 msgstr "Cone Construction"
852 #: GeometryGUI_CutDlg.cxx:48
853 msgid "GEOM_CUT_TITLE"
854 msgstr "BOOLEAN : Cut Of Two Objects"
856 #: GeometryGUI_CylinderDlg.cxx:47
857 msgid "GEOM_CYLINDER_TITLE"
858 msgstr "Cylinder Construction"
860 #: GeometryGUI_CheckShape.cxx:60
861 msgid "GEOM_CHECK_TITLE"
862 msgstr "Check Shape Informations"
864 #: GeometryGUI_CheckShape.cxx:83
865 msgid "GEOM_CHECK_INFOS"
866 msgstr "Object And Its Topological Informations"
868 #: GeometryGUI_DistanceDlg.cxx:57
869 msgid "GEOM_MINDIST_TITLE"
870 msgstr "Minimun Distance Between Two Objects"
872 #: GeometryGUI_DistanceDlg.cxx:57
873 msgid "GEOM_MINDIST_OBJ"
874 msgstr "Objects And Results"
876 #: GeometryGUI_EdgeDlg.cxx:47
877 msgid "GEOM_EDGE_TITLE"
878 msgstr "Create An Edge"
880 #: GeometryGUI_FilletDlg.cxx:58
881 msgid "GEOM_FILLET_TITLE"
882 msgstr "Fillet Construction"
884 #: GeometryGUI_FilletDlg.cxx:58
885 msgid "GEOM_FILLET_ALL"
886 msgstr "Fillet On Whole Shape"
888 #: GeometryGUI_FilletDlg.cxx:58
889 msgid "GEOM_FILLET_EDGES"
890 msgstr "Fillet On Edges From Shape"
892 #: GeometryGUI_FilletDlg.cxx:58
893 msgid "GEOM_FILLET_FACES"
894 msgstr "Fillet On Faces From Shape"
896 #: GeometryGUI_FaceDlg.cxx:49
897 msgid "GEOM_FACE_TITLE"
898 msgstr "Create A Face"
900 #: GeometryGUI_FaceDlg.cxx:78
901 msgid "GEOM_FACE_FFW"
902 msgstr "Face from a wire"
904 #: GeometryGUI_FaceDlg.cxx:103
905 msgid "GEOM_FACE_OPT"
906 msgstr "Try to create a planar face"
908 #: GeometryGUI_FillingDlg.cxx:53
909 msgid "GEOM_FILLING_TITLE"
910 msgstr "Filling Surface With Curves"
912 #: GeometryGUI_FillingDlg.cxx:112
913 msgid "GEOM_FILLING_ARG"
914 msgstr "Arguments And Parameters"
916 #: GeometryGUI_FillingDlg.cxx:128
917 msgid "GEOM_FILLING_MIN_DEG"
920 #: GeometryGUI_FillingDlg.cxx:142
921 msgid "GEOM_FILLING_MAX_DEG"
924 #: GeometryGUI_FillingDlg.cxx:150
925 msgid "GEOM_FILLING_TOL_2D"
928 #: GeometryGUI_FillingDlg.cxx:170
929 msgid "GEOM_FILLING_COMPOUND"
930 msgstr "Curves Comp."
932 #: GeometryGUI_FillingDlg.cxx:184
933 msgid "GEOM_FILLING_TOL_3D"
936 #: GeometryGUI_FillingDlg.cxx:192
937 msgid "GEOM_FILLING_NB_ITER"
940 #: GeometryGUI_FuseDlg.cxx:48
941 msgid "GEOM_FUSE_TITLE"
942 msgstr "BOOLEAN : Fuse Two Objects"
944 #: GeometryGUI_InertiaDlg.cxx:42
945 msgid "GEOM_INERTIA_TITLE"
946 msgstr "Calculs Of Inertia"
948 #: GeometryGUI_InertiaDlg.cxx:50
949 msgid "GEOM_INERTIA_CONSTR"
950 msgstr "Matrix And Moments Of Inertia"
952 #: GeometryGUI_InertiaDlg.cxx:100
953 msgid "GEOM_INERTIA_I"
956 #: GeometryGUI_InertiaDlg.cxx:182
957 msgid "GEOM_INERTIA_IXYZ"
958 msgstr "IX & IY & IZ :"
960 #: GeometryGUI_LineDlg.cxx:50
961 msgid "GEOM_LINE_TITLE"
962 msgstr "Line Construction"
964 #: GeometryGUI_MaxToleranceDlg.cxx:53
965 msgid "GEOM_TOLERANCE_TITLE"
966 msgstr "Maximum Tolerance"
968 #: GeometryGUI_MaxToleranceDlg.cxx:84
969 msgid "GEOM_TOLERANCE_CONSTR"
970 msgstr "Object And Its Tolerances"
972 #: GeometryGUI_MaxToleranceDlg.cxx:121
973 msgid "GEOM_TOLERANCE_FACE"
976 #: GeometryGUI_MaxToleranceDlg.cxx:138
977 msgid "GEOM_TOLERANCE_EDGE"
980 #: GeometryGUI_MaxToleranceDlg.cxx:155
981 msgid "GEOM_TOLERANCE_VERTEX"
984 #: GeometryGUI_MirrorDlg.cxx:52
985 msgid "GEOM_MIRROR_TITLE"
986 msgstr "Mirror An Object"
988 #: GeometryGUI_OrientationDlg.cxx:46
989 msgid "GEOM_ORIENTATION_TITLE"
990 msgstr "Change Orientation"
992 #: GeometryGUI_OrientationDlg.cxx:134
993 msgid "GEOM_ORIENTATION_OPT"
994 msgstr "Reverse orientation with normal vectors simulation"
996 #: GeometryGUI_PartitionDlg.cxx:45
997 msgid "GEOM_PARTITION_TITLE"
998 msgstr "Partition Of Object With Tool"
1000 #: GeometryGUI_PartitionDlg.cxx:45
1001 msgid "GEOM_KEEP_OBJECT"
1002 msgstr "Keep Object"
1004 #: GeometryGUI_PartitionDlg.cxx:45
1005 msgid "GEOM_PARTITION_ORIENTATION"
1006 msgstr "Change Orientation"
1008 #: GeometryGUI_PartitionDlg.cxx:45
1009 msgid "SUPPRESS_RESULT"
1010 msgstr "Suppress Result"
1012 msgid "GEOM_REMOVE_WEBS"
1013 msgstr "Remove webs"
1015 msgid "GEOM_SET_MATERIALS"
1016 msgstr "Set materials"
1018 #: OperationGUI_MaterialDlg.cxx:45
1019 msgid "GEOM_MATERIAL_TITLE"
1020 msgstr "Define materials for Dominant Fuse"
1022 msgid "GEOM_MATERIAL_SHAPE"
1025 msgid "GEOM_MATERIAL_MATERIAL"
1028 msgid "GEOM_MATERIAL_ID"
1029 msgstr "Material ID:"
1031 msgid "GEOM_MATERIAL_SET"
1034 #: GeometryGUI_PipeDlg.cxx:47
1035 msgid "GEOM_PIPE_TITLE"
1036 msgstr "Pipe Construction"
1038 #: GeometryGUI_PointDlg.cxx:52
1039 msgid "GEOM_POINT_TITLE"
1040 msgstr "Point Construction"
1042 #: GeometryGUI_PlaneDlg.cxx:60
1043 msgid "GEOM_PLANE_TITLE"
1044 msgstr "Plane Construction"
1046 #: GeometryGUI_PlaneDlg.cxx:172
1047 msgid "GEOM_PLANE_PVC"
1048 msgstr "Point + Coordinate Vector"
1050 #: GeometryGUI_PlaneDlg.cxx:133
1051 msgid "GEOM_PLANE_PV"
1052 msgstr "Point + Vector"
1054 #: GeometryGUI_PrismDlg.cxx:54
1055 msgid "GEOM_PRISM_TITLE"
1056 msgstr "Prism Construction"
1058 #: GeometryGUI_PrismDlg.cxx:83
1059 msgid "GEOM_PRISM_BSV"
1060 msgstr "Base Shape + Vector"
1062 msgid "GEOM_PRISM_BSV_2P"
1063 msgstr "Base Shape + 2 Points"
1065 #: GeometryGUI_PropertiesDlg.cxx:56
1066 msgid "GEOM_PROPERTIES_TITLE"
1067 msgstr "Basic Properties Informations"
1069 #: GeometryGUI_PropertiesDlg.cxx:78
1070 msgid "GEOM_PROPERTIES_CONSTR"
1071 msgstr "Object And Its Properties"
1073 #: GeometryGUI_PropertiesDlg.cxx:114
1074 msgid "GEOM_PROPERTIES_SURFACE"
1075 msgstr "Surface is :"
1077 #: GeometryGUI_PropertiesDlg.cxx:120
1078 msgid "GEOM_PROPERTIES_VOLUME"
1079 msgstr "Volume is :"
1081 #: GeometryGUI_RevolDlg.cxx:49
1082 msgid "GEOM_REVOLUTION_TITLE"
1083 msgstr "Construction By Revolution"
1085 #: GeometryGUI_RotationDlg.cxx:51
1086 msgid "GEOM_ROTATION_TITLE"
1087 msgstr "Rotation Of An Object"
1089 #: GeometryGUI_ScaleDlg.cxx:52
1090 msgid "GEOM_SCALE_TITLE"
1091 msgstr "Scale An Object"
1093 #: GeometryGUI_PositionDlg.cxx:52
1094 msgid "GEOM_POSITION_TITLE"
1095 msgstr "Modify the Location of an Object"
1097 #: GeometryGUI_PositionDlg.cxx:52
1098 msgid "GEOM_START_LCS"
1101 #: GeometryGUI_PositionDlg.cxx:52
1102 msgid "GEOM_END_LCS"
1105 #: GeometryGUI_OffsetDlg.cxx:53
1106 msgid "GEOM_OFFSET_TITLE"
1107 msgstr "Offset Surface"
1109 #: GeometryGUI_ScaleDlg.cxx:117
1110 msgid "GEOM_SCALE_FACTOR"
1111 msgstr "Scale Factor :"
1113 #: GeometryGUI_SectionDlg.cxx:50
1114 msgid "GEOM_SECTION_TITLE"
1115 msgstr "BOOLEAN : Section Of Two Objects"
1117 #: GeometryGUI_SewingDlg.cxx:48
1118 msgid "GEOM_SEWING_TITLE"
1119 msgstr "Topological sewing"
1121 #: GeometryGUI_ShellDlg.cxx:53
1122 msgid "GEOM_SHELL_TITLE"
1123 msgstr "Shell Construction"
1125 #: GeometryGUI_SolidDlg.cxx:74
1126 msgid "GEOM_SOLID_TITLE"
1127 msgstr "Solid Construction"
1129 #: GeometryGUI_SphereDlg.cxx:50
1130 msgid "GEOM_SPHERE_TITLE"
1131 msgstr "Sphere Construction"
1133 #: GeometryGUI_SphereDlg.cxx:113
1134 msgid "GEOM_SPHERE_CR"
1135 msgstr "Center + Radius"
1137 #: GeometryGUI_SphereDlg.cxx:146
1138 msgid "GEOM_SPHERE_RO"
1139 msgstr "Radius At Origin"
1141 #: GeometryGUI_SubShapeDlg.cxx:55
1142 msgid "GEOM_SUBSHAPE_TITLE"
1143 msgstr "Sub Shapes Selection"
1145 #: GeometryGUI_SubShapeDlg.cxx:131
1146 msgid "GEOM_SUBSHAPE_TYPE"
1147 msgstr "Sub Shapes Type :"
1149 #: GeometryGUI_SubShapeDlg.cxx:137
1150 msgid "GEOM_SUBSHAPE_SELECT"
1151 msgstr "Select Sub Shapes"
1153 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1154 msgstr "Please, select one or more sub-shapes"
1156 #: GeometryGUI_TorusDlg.cxx:51
1157 msgid "GEOM_TORUS_TITLE"
1158 msgstr "Torus Construction"
1160 #: GeometryGUI_SuppressFacesDlg.cxx:103
1161 msgid "GEOM_SUPRESSFACE_TITLE"
1162 msgstr "Suppress Faces In An Object"
1164 #: GeometryGUI_SuppressFacesDlg.cxx:164
1165 msgid "GEOM_SUPRESSFACE_SELECT"
1166 msgstr "Select Faces To Suppress"
1168 #: GeometryGUI_TranslationDlg.cxx:78
1169 msgid "GEOM_TRANSLATION_COOR"
1170 msgstr "Translation With Coordinates"
1172 msgid "GEOM_TRANSPARENCY_TITLE"
1173 msgstr "Transparency"
1175 msgid "GEOM_TRANSPARENCY_OPAQUE"
1178 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1179 msgstr "Transparent"
1181 msgid "GEOM_SUPPRESSHOLE_TITLE"
1182 msgstr "Suppress holes"
1184 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1185 msgstr "Select the face with hole"
1187 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1188 msgstr "Select wire on face"
1190 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1191 msgstr "Select end face (if hole traversing)"
1193 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1194 msgstr "Select end wire (if hole traversing)"
1196 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1197 msgstr "Face or shell"
1199 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1200 msgstr "Select hole(s) on the face"
1202 #: GeometryGUI_TranslationDlg.cxx:56
1203 msgid "GEOM_TRANSLATION_TITLE"
1204 msgstr "Translation Of An Object"
1206 #: GeometryGUI_VectorDlg.cxx:54
1207 msgid "GEOM_VECTOR_TITLE"
1208 msgstr "Vector Construction"
1210 #: GeometryGUI_WhatisDlg.cxx:63
1211 msgid "GEOM_WHATIS_TITLE"
1212 msgstr "Whatis Informations"
1214 #: GeometryGUI_WhatisDlg.cxx:86
1215 msgid "GEOM_WHATIS_OBJECT"
1216 msgstr "Object And Its Topological Informations"
1218 #: GeometryGUI_WireDlg.cxx:46
1219 msgid "GEOM_WIRE_TITLE"
1220 msgstr "Create A Wire"
1222 #: GeometryGUI_WireDlg.cxx:103
1223 msgid "GEOM_WIRE_CONNECT"
1224 msgstr "Wire creation from wires/edges connected"
1226 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1227 msgid "GEOM_WPLANE_TITLE"
1228 msgstr "Working Plane Selection"
1230 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1231 msgid "GEOM_WPLANE_FACE"
1232 msgstr "Plane Or Planar Face"
1234 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1235 msgid "GEOM_WPLANE_VECTOR"
1236 msgstr "Select 2 vectors"
1238 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1239 msgid "GEOM_WPLANE_VX"
1242 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1243 msgid "GEOM_WPLANE_VZ"
1246 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1247 msgid "GEOM_WPLANE_ORIGIN"
1248 msgstr "Select a plane"
1250 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1251 msgid "GEOM_WPLANE_OYZ"
1254 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1255 msgid "GEOM_WPLANE_OZX"
1258 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1259 msgid "GEOM_WPLANE_OXY"
1262 #: GeometryGUI_multiTranslationDlg.cxx:107
1263 msgid "GEOM_MULTITRANSLATION_TITLE"
1264 msgstr "Multi-Translation"
1266 #: GeometryGUI_multiTranslationDlg.cxx:107
1267 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1268 msgstr "Multi Translation Simple"
1270 #: GeometryGUI_multiTranslationDlg.cxx:107
1271 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1272 msgstr "Multi Translation Double"
1274 #: GeometryGUI_multiRotationDlg.cxx:107
1275 msgid "GEOM_MULTIROTATION_TITLE"
1276 msgstr "Multi-Rotation"
1278 #: GeometryGUI_multiRotationDlg.cxx:107
1279 msgid "GEOM_MULTIROTATION_SIMPLE"
1280 msgstr "Multi Rotation Simple"
1282 #: GeometryGUI_multiRotationDlg.cxx:107
1283 msgid "GEOM_MULTIROTATION_DOUBLE"
1284 msgstr "Multi Rotation Double"
1286 msgid "GEOM_PARAM_POINT"
1287 msgstr "Parametric point"
1289 msgid "GEOM_REF_POINT"
1290 msgstr "Point with reference"
1293 #==============================================================================
1296 #: GeometryGUI.cxx:4613
1297 msgid "GEOM_MEN_WIREFRAME"
1300 #: GeometryGUI.cxx:4613
1301 msgid "GEOM_MEN_SHADING"
1304 msgid "GEOM_RECONSTRUCTION_LIMIT"
1305 msgstr "Reconstruction Limit"
1307 msgid "GEOM_SUPPRESS_RESULT"
1308 msgstr "Suppress Result"
1310 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1313 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1316 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1318 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1320 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1322 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1324 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1326 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1328 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1331 msgid "GEOM_SPLINE_TITLE"
1332 msgstr "Spline Construction"
1337 msgid "GEOM_INTERPOL"
1338 msgstr "Interpolation"
1341 #==============================================================================
1344 msgid "GEOM_SKETCHER_EL"
1345 msgstr "Element Type"
1347 msgid "GEOM_BUT_CLOSE_SKETCH"
1348 msgstr "Sketch Closure"
1350 msgid "GEOM_BUT_END_SKETCH"
1351 msgstr "Sketch Validation"
1353 msgid "GEOM_SKETCHER_TITLE"
1354 msgstr "Sketch Construction"
1356 msgid "GEOM_SKETCHER_POINT"
1359 msgid "GEOM_SKETCHER_SEGMENT"
1362 msgid "GEOM_SKETCHER_ARC"
1365 msgid "GEOM_SKETCHER_DIR"
1368 msgid "GEOM_SKETCHER_POINT2"
1371 msgid "GEOM_SKETCHER_DEST"
1372 msgstr "Destination"
1374 msgid "GEOM_SKETCHER_ABS"
1377 msgid "GEOM_SKETCHER_REL"
1380 msgid "GEOM_SKETCHER_SEL"
1383 msgid "GEOM_SKETCHER_ANGLE"
1386 msgid "GEOM_SKETCHER_PER"
1387 msgstr "Perpendicular"
1389 msgid "GEOM_SKETCHER_TAN"
1392 msgid "GEOM_SKETCHER_VXVY"
1395 msgid "GEOM_SKETCHER_LENGTH"
1398 msgid "GEOM_SKETCHER_X"
1401 msgid "GEOM_SKETCHER_Y"
1404 msgid "GEOM_SKETCHER_X2"
1407 msgid "GEOM_SKETCHER_Y2"
1410 msgid "GEOM_SKETCHER_X3"
1413 msgid "GEOM_SKETCHER_Y3"
1416 msgid "GEOM_SKETCHER_DX2"
1419 msgid "GEOM_SKETCHER_DY2"
1422 msgid "GEOM_SKETCHER_VX2"
1425 msgid "GEOM_SKETCHER_VY2"
1428 msgid "GEOM_SKETCHER_LENGTH2"
1431 msgid "GEOM_SKETCHER_ANGLE2"
1434 msgid "GEOM_SKETCHER_RADIUS2"
1437 msgid "GEOM_SKETCHER_UNDO"
1440 msgid "GEOM_SKETCHER_APPLY"
1443 msgid "GEOM_SKETCHER_VALUES"
1446 msgid "GEOM_SKETCHER_TYPE"
1449 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1450 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1452 msgid "GEOM_FILLET_ABORT"
1453 msgstr "Fillet can't be computed with radius %1"
1455 msgid "GEOM_CHAMFER_ABORT"
1456 msgstr "Chamfer can't be computed with %1 and %2"
1458 msgid "GEOM_3_POINTS"
1470 msgid "GEOM_CREATE_COPY"
1471 msgstr "Create a copy"
1473 msgid "GEOM_CREATE_SINGLE_SOLID"
1474 msgstr "Create a single solid"
1479 msgid "GEOM_ERROR_STATUS"
1480 msgstr "Operation status"
1482 msgid "GEOM_ELLIPSE_ERROR_1"
1483 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1488 msgid "GEOM_POLYLINE"
1494 msgid "GEOM_CURVE_TITLE"
1495 msgstr "Curve Construction"
1497 # ShapeProcessDlg.cxx
1498 msgid "GEOM_SHAPEPROCESS_TITLE"
1499 msgstr "Shape Processing"
1504 msgid "GEOM_SELECTED_OBJECTS"
1505 msgstr "Selected objects"
1507 msgid "GEOM_OPERATIONS"
1510 msgid "GEOM_PARAMETERS"
1513 msgid "GEOM_FixShape"
1516 msgid "GEOM_FixFaceSize"
1517 msgstr "FixFaceSize"
1519 msgid "GEOM_DropSmallEdges"
1520 msgstr "DropSmallEdges"
1522 msgid "GEOM_SplitAngle"
1525 msgid "GEOM_SplitClosedFaces"
1526 msgstr "SplitClosedFaces"
1528 msgid "GEOM_SplitContinuity"
1529 msgstr "SplitContinuity"
1531 msgid "GEOM_BSplineRestriction"
1532 msgstr "BSplineRestriction"
1534 msgid "GEOM_ToBezier"
1537 msgid "GEOM_SameParameter"
1538 msgstr "SameParameter"
1540 msgid "GEOM_3D_TOLERANCE"
1541 msgstr "3D tolerance"
1543 msgid "GEOM_MAX_3D_TOLERANCE"
1544 msgstr "Max 3D tolerance"
1546 msgid "GEOM_MAX_TOLERANCE"
1547 msgstr "Max tolerance"
1549 msgid "GEOM_ANGLE_1"
1552 msgid "GEOM_NUM_SPLIT_POINTS"
1553 msgstr "Number of splitting points"
1555 msgid "GEOM_SURFACE_CONTINUTY"
1556 msgstr "Surface continuity"
1558 msgid "GEOM_CURVE_CONTINUTY"
1559 msgstr "Curve continuity"
1561 msgid "GEOM_SURFACE_MODE"
1562 msgstr "Surface mode"
1564 msgid "GEOM_3D_CURVE_MODE"
1565 msgstr "3D curve mode"
1567 msgid "GEOM_2D_CURVE_MODE"
1568 msgstr "2D curve mode"
1570 msgid "GEOM_2D_TOLERANCE"
1571 msgstr "2D tolerance"
1573 msgid "GEOM_REQUIRED_DEGREE"
1574 msgstr "Required degree"
1576 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1577 msgstr "Required number of segments"
1579 msgid "GEOM_3D_CONTINUTY"
1580 msgstr "3D continuity"
1582 msgid "GEOM_2D_CONTINUTY"
1583 msgstr "2D continuity"
1585 msgid "GEOM_CLOSECONTOUR_TITLE"
1586 msgstr "Close contour"
1588 msgid "GEOM_ERR_LIB_NOT_FOUND"
1589 msgstr "GUI library corresponding to the user action can not be found or loaded"
1591 msgid "OperationGUI_ChamferDlg::FACE_1"
1594 msgid "OperationGUI_ChamferDlg::FACE_2"
1597 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1598 msgstr "Selected faces"
1600 msgid "OperationGUI_ChamferDlg::D"
1603 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1604 msgstr "Selected edges"
1606 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1607 msgstr "Selected faces"
1609 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1610 msgstr "Suppress internal wires"
1612 msgid "GEOM_INTERNAL_WIRES"
1613 msgstr "Internal wires"
1615 msgid "GEOM_SELECTED_FACE"
1616 msgstr "Selected face"
1618 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1619 msgstr "Remove all internal wires"
1621 msgid "GEOM_REMOVE_HOLES_TITLE"
1622 msgstr "Suppress holes"
1624 msgid "GEOM_SELECTED_SHAPE"
1625 msgstr "Selected shape"
1627 msgid "GEOM_REMOVE_ALL_HOLES"
1628 msgstr "Remove all holes"
1633 msgid "GEOM_WIRES_TO_REMOVE"
1634 msgstr "Wires to remove"
1639 msgid "GEOM_FREE_BOUNDARIES"
1640 msgstr "Free boundaries"
1642 msgid "GEOM_FREE_FACES"
1645 msgid "GEOM_BY_PARAMETER"
1646 msgstr "By parameter"
1648 msgid "GEOM_BY_LENGTH"
1651 msgid "GEOM_DIVIDE_EDGE_TITLE"
1652 msgstr "Addition of point"
1654 msgid "GEOM_ADD_POINT"
1660 msgid "GEOM_MARKER_TITLE"
1661 msgstr "Create marker"
1666 msgid "GEOM_TRIHEDRON"
1669 msgid "GEOM_FREE_BOUNDS_MSG"
1670 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1672 msgid "GEOM_FREE_BOUNDS_ERROR"
1673 msgstr "Object is not selected"
1675 msgid "GEOM_FREE_BOUNDS_TLT"
1676 msgstr "Free boundary detection"
1678 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1679 msgstr "Check free boundaries"
1681 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1682 msgstr "Free boundaries"
1684 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1685 msgstr "Number of closed free boundaries: "
1687 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1688 msgstr "Number of open free boundaries: "
1690 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1691 msgstr "Please, select at least one Shape Process operation to proceed."
1693 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1694 msgstr "Please, select a geometrical object for Shape Processing."
1696 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1697 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1699 msgid "MeasureGUI_PointDlg::POINT"
1702 msgid "MeasureGUI_PointDlg::X"
1705 msgid "MeasureGUI_PointDlg::Y"
1708 msgid "MeasureGUI_PointDlg::Z"
1711 msgid "MeasureGUI_PointDlg::CAPTION"
1712 msgstr "Point Coordinates"
1714 msgid "MeasureGUI_PointDlg::COORDINATES"
1715 msgstr "Point and its coordinates"
1717 msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
1718 msgstr "Check also geometry"
1720 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1721 msgstr "Create Group"
1723 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1726 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1729 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1732 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1733 msgstr "Main Shape And Sub-Shapes"
1735 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1738 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1739 msgstr "Select Sub-Shapes"
1741 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1744 msgid "GroupGUI_GroupDlg::ADD"
1747 msgid "GroupGUI_GroupDlg::REMOVE"
1750 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1753 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1754 msgstr "Please, specify a non-empty group name"
1756 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1757 msgstr "Please, select a main shape"
1759 msgid "GroupGUI_GroupDlg::NO_GROUP"
1760 msgstr "Please, select a group to edit"
1762 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1763 msgstr "Please, select one or more sub-shapes to put into the group"
1765 msgid "GroupGUI::NO_GROUP"
1766 msgstr "Please, select a group to edit"
1773 msgid "WRN_NOT_IMPLEMENTED"
1774 msgstr "Sorry, this functionality is not yet implemented"
1776 ### BlocksGUI_TrsfDlg ###
1778 msgid "BlocksGUI_TrsfDlg::FACE_1"
1781 msgid "BlocksGUI_TrsfDlg::FACE_2"
1784 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1787 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1790 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1793 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1796 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1797 msgstr "Block Multi-Transformation"
1799 msgid "GEOM_BLOCK_MULTITRSF"
1800 msgstr "Block Multi-Transformation"
1802 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1803 msgstr "Multi-Transformation Simple"
1805 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1806 msgstr "Multi-Transformation Double"
1808 ### BlocksGUI_QuadFaceDlg ###
1810 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1813 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1816 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1819 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1822 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1825 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1828 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1831 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1834 msgid "GEOM_QUAD_FACE_TITLE"
1835 msgstr "Quadrangle Face Construction"
1837 msgid "GEOM_QUAD_FACE"
1838 msgstr "Quadrangle Face"
1840 ### BlocksGUI_BlockDlg ###
1842 msgid "BlocksGUI_BlockDlg::FACE_1"
1845 msgid "BlocksGUI_BlockDlg::FACE_2"
1848 msgid "BlocksGUI_BlockDlg::FACE_3"
1851 msgid "BlocksGUI_BlockDlg::FACE_4"
1854 msgid "BlocksGUI_BlockDlg::FACE_5"
1857 msgid "BlocksGUI_BlockDlg::FACE_6"
1860 msgid "GEOM_BLOCK_TITLE"
1861 msgstr "Hexahedral Solid Construction"
1864 msgstr "Hexahedral Solid"
1866 #==============================================================================
1868 msgid "BasicGUI_MarkerDlg::CAPTION"
1869 msgstr "Local CS Construction"
1871 msgid "BasicGUI_MarkerDlg::LOCALCS"
1872 msgstr "Local coordinate system"
1874 msgid "BasicGUI_MarkerDlg::ORIGIN"
1875 msgstr "Coordinates of origin"
1877 msgid "BasicGUI_MarkerDlg::XDIR"
1878 msgstr "X axis direction"
1880 msgid "BasicGUI_MarkerDlg::YDIR"
1881 msgstr "Y axis direction"
1883 msgid "BasicGUI_MarkerDlg::DX"
1886 msgid "BasicGUI_MarkerDlg::DY"
1889 msgid "BasicGUI_MarkerDlg::DZ"
1892 msgid "BasicGUI_MarkerDlg::LCS_NAME"
1895 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
1896 msgstr "Coordinate system axes cannot be parallel"
1928 ### BlocksGUI_ExplodeDlg ###
1930 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
1931 msgstr "Min. nb. faces"
1933 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
1934 msgstr "Max. nb. faces"
1936 msgid "GEOM_BLOCK_EXPLODE_TITLE"
1937 msgstr "Sub Blocks Selection"
1939 msgid "GEOM_BLOCK_EXPLODE"
1942 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
1943 msgstr "There are %1 specified blocks and NO other solids"
1945 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
1946 msgstr "There are %1 specified blocks and some other solids"
1948 msgid "ShHealOper_NotError_msg"
1949 msgstr "Shape Healing algorithm has done no modification of the original shape"
1951 msgid "ShHealOper_InvalidParameters_msg"
1952 msgstr "Incorrect parameters for Shape Healing algorithm"
1954 msgid "ShHealOper_ErrorExecution_msg"
1955 msgstr "Shape Healing algorithm failed"
1957 msgid "GEOM_GLUE_TITLE"
1963 msgid "GEOM_FREE_FACES_TITLE"
1966 ### New object names for RepairGUI ###
1967 msgid "SEWING_NEW_OBJ_NAME"
1970 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
1973 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
1974 msgstr "CloseContour"
1976 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
1977 msgstr "SupressHoles"
1979 msgid "GLUE_NEW_OBJ_NAME"
1982 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
1983 msgstr "RemoveIntWires"
1985 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
1986 msgstr "ProcessShape"
1988 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
1989 msgstr "SupressFaces"
1991 msgid "NON_GEOM_OBJECTS_SELECTED"
1992 msgstr "There are objects selected which do not belong to %1 component."
1994 msgid "GEOM_PROPAGATE_TITLE"
1997 msgid "GEOM_PROPAGATE"
2000 ### Menu of GEOM module ###
2005 msgstr "Import geometry from BREP file"
2011 msgstr "Import geometry from BREP file"
2014 msgstr "Export geometry to BREP file"
2020 msgstr "Export geometry to BREP file"
2026 msgstr "Delete object"
2032 msgstr "Delete object"
2034 msgid "MEN_NEW_ENTITY"
2041 msgstr "Create a point"
2047 msgstr "Create a point"
2050 msgstr "Create a line"
2056 msgstr "Create a line"
2059 msgstr "Create a circle"
2065 msgstr "Create a circle"
2068 msgstr "Create an ellipse"
2074 msgstr "Create an ellipse"
2077 msgstr "Create an arc"
2083 msgstr "Create an arc"
2086 msgstr "Create a curve"
2092 msgstr "Create a curve"
2095 msgstr "Create a vector"
2101 msgstr "Create a vector"
2104 msgstr "Create a plane"
2110 msgstr "Create a plane"
2112 msgid "TOP_WORK_PLANE"
2113 msgstr "Create a working plane"
2115 msgid "MEN_WORK_PLANE"
2116 msgstr "Working plane"
2118 msgid "STB_WORK_PLANE"
2119 msgstr "Create a working plane"
2121 msgid "TOP_LOCAL_CS"
2122 msgstr "Create a local coordinate system"
2124 msgid "MEN_LOCAL_CS"
2125 msgstr "Local coordinate system"
2127 msgid "STB_LOCAL_CS"
2128 msgstr "Create a local coordinate system"
2130 msgid "MEN_PRIMITIVES"
2134 msgstr "Create a box"
2140 msgstr "Create a box"
2142 msgid "TOP_CYLINDER"
2143 msgstr "Create a cylinder"
2145 msgid "MEN_CYLINDER"
2148 msgid "STB_CYLINDER"
2149 msgstr "Create a cylinder"
2152 msgstr "Create a sphere"
2158 msgstr "Create a sphere"
2161 msgstr "Create a torus"
2167 msgstr "Create a torus"
2170 msgstr "Create a cone"
2176 msgstr "Create a cone"
2178 msgid "MEN_GENERATION"
2181 msgid "TOP_EXTRUSION"
2182 msgstr "Create an extrusion"
2184 msgid "MEN_EXTRUSION"
2187 msgid "STB_EXTRUSION"
2188 msgstr "Create an extrusion"
2190 msgid "TOP_REVOLUTION"
2191 msgstr "Create a revolution"
2193 msgid "MEN_REVOLUTION"
2196 msgid "STB_REVOLUTION"
2197 msgstr "Create a revolution"
2200 msgstr "Create a filling"
2206 msgstr "Create a filling"
2209 msgstr "Extrusion along a path"
2212 msgstr "Extrusion along a path"
2215 msgstr "Create a shape by Extrusion along a path"
2220 msgid "TOP_GROUP_CREATE"
2221 msgstr "Create a group"
2223 msgid "MEN_GROUP_CREATE"
2226 msgid "STB_GROUP_CREATE"
2227 msgstr "Create a group"
2229 msgid "TOP_GROUP_EDIT"
2230 msgstr "Edit a group"
2232 msgid "MEN_GROUP_EDIT"
2235 msgid "STB_GROUP_EDIT"
2236 msgstr "Edit a group"
2242 msgstr "Quadrangle Face"
2245 msgstr "Quadrangle Face"
2248 msgstr "Quadrangle Face"
2250 msgid "TOP_HEX_SOLID"
2251 msgstr "Hexahedral Solid"
2253 msgid "MEN_HEX_SOLID"
2254 msgstr "Hexahedral Solid"
2256 msgid "STB_HEX_SOLID"
2257 msgstr "Hexahedral Solid"
2281 msgstr "Build an edge"
2287 msgstr "Build an edge"
2290 msgstr "Build a wire"
2296 msgstr "Build a wire"
2299 msgstr "Build a face"
2305 msgstr "Build a face"
2308 msgstr "Build a shell"
2314 msgstr "Build a shell"
2317 msgstr "Build a solid"
2323 msgstr "Build a solid"
2325 msgid "TOP_COMPOUND"
2326 msgstr "Build a compound"
2328 msgid "MEN_COMPOUND"
2331 msgid "STB_COMPOUND"
2332 msgstr "Build a compound"
2334 msgid "MEN_OPERATIONS"
2376 msgid "MEN_TRANSFORMATION"
2377 msgstr "Transformation"
2379 msgid "TOP_TRANSLATION"
2380 msgstr "Translation"
2382 msgid "MEN_TRANSLATION"
2383 msgstr "Translation"
2385 msgid "STB_TRANSLATION"
2386 msgstr "Translation"
2388 msgid "TOP_ROTATION"
2391 msgid "MEN_ROTATION"
2394 msgid "STB_ROTATION"
2397 msgid "TOP_MODIFY_LOCATION"
2398 msgstr "Modify the Location"
2400 msgid "MEN_MODIFY_LOCATION"
2401 msgstr "Modify the Location"
2403 msgid "STB_MODIFY_LOCATION"
2404 msgstr "Modify the Location"
2407 msgstr "Mirror image"
2410 msgstr "Mirror image"
2413 msgstr "Mirror image"
2416 msgstr "Scale transform"
2419 msgstr "Scale transform"
2422 msgstr "Scale transform"
2425 msgstr "Offset surface"
2428 msgstr "Offset surface"
2431 msgstr "Offset surface"
2433 msgid "TOP_MUL_TRANSLATION"
2434 msgstr "Multi-Translation"
2436 msgid "MEN_MUL_TRANSLATION"
2437 msgstr "Multi-Translation"
2439 msgid "STB_MUL_TRANSLATION"
2440 msgstr "Multi-Translation"
2442 msgid "TOP_MUL_ROTATION"
2443 msgstr "Multi-Rotation"
2445 msgid "MEN_MUL_ROTATION"
2446 msgstr "Multi-Rotation"
2448 msgid "STB_MUL_ROTATION"
2449 msgstr "Multi-Rotation"
2451 msgid "TOP_PARTITION"
2454 msgid "MEN_PARTITION"
2457 msgid "STB_PARTITION"
2460 msgid "TOP_ARCHIMEDE"
2463 msgid "MEN_ARCHIMEDE"
2466 msgid "STB_ARCHIMEDE"
2487 msgid "TOP_CLIPPING"
2488 msgstr "Clipping range"
2490 msgid "MEN_CLIPPING"
2491 msgstr "Clipping range"
2493 msgid "STB_CLIPPING"
2494 msgstr "Clipping range"
2496 msgid "TOP_MUL_TRANSFORM"
2497 msgstr "Multi-transformation"
2499 msgid "MEN_MUL_TRANSFORM"
2500 msgstr "Multi-transformation"
2502 msgid "STB_MUL_TRANSFORM"
2503 msgstr "Multi-transformation"
2505 msgid "TOP_EXPLODE_BLOCKS"
2506 msgstr "Explode on Blocks"
2508 msgid "MEN_EXPLODE_BLOCKS"
2509 msgstr "Explode on Blocks"
2511 msgid "STB_EXPLODE_BLOCKS"
2512 msgstr "Explode on Blocks"
2514 msgid "TOP_PROPAGATE"
2517 msgid "MEN_PROPAGATE"
2520 msgid "STB_PROPAGATE"
2526 msgid "TOP_SHAPE_PROCESS"
2527 msgstr "Perform shape processing"
2529 msgid "MEN_SHAPE_PROCESS"
2530 msgstr "Shape processing"
2532 msgid "STB_SHAPE_PROCESS"
2533 msgstr "Perform shape processing "
2535 msgid "TOP_SUPPRESS_FACES"
2536 msgstr "Perform suppress faces"
2538 msgid "MEN_SUPPRESS_FACES"
2539 msgstr "Suppress faces"
2541 msgid "STB_SUPPRESS_FACES"
2542 msgstr "Perform suppress faces"
2544 msgid "TOP_CLOSE_CONTOUR"
2545 msgstr "Perform close contour"
2547 msgid "MEN_CLOSE_CONTOUR"
2548 msgstr "Close contour"
2550 msgid "STB_CLOSE_CONTOUR"
2551 msgstr "Perform close contour"
2553 msgid "TOP_SUPPRESS_INT_WIRES"
2554 msgstr "Perform suppress internal wires"
2556 msgid "MEN_SUPPRESS_INT_WIRES"
2557 msgstr "Suppress internal wires"
2559 msgid "STB_SUPPRESS_INT_WIRES"
2560 msgstr "Perform suppress internal wires"
2562 msgid "TOP_SUPPERSS_HOLES"
2563 msgstr "Perform suppress holes"
2565 msgid "MEN_SUPPERSS_HOLES"
2566 msgstr "Suppress holes"
2568 msgid "STB_SUPPERSS_HOLES"
2569 msgstr "Perform suppress holes"
2572 msgstr "Perform sewing"
2578 msgstr "Perform sewing"
2580 msgid "TOP_GLUE_FACES"
2581 msgstr "Perform glue faces"
2583 msgid "MEN_GLUE_FACES"
2586 msgid "STB_GLUE_FACES"
2587 msgstr "Perform glue faces"
2589 msgid "TOP_POINT_ON_EDGE"
2590 msgstr "Add point on edge"
2592 msgid "MEN_POINT_ON_EDGE"
2593 msgstr "Add point on edge"
2595 msgid "STB_POINT_ON_EDGE"
2596 msgstr "Add point on edge"
2598 msgid "TOP_CHECK_FREE_BNDS"
2599 msgstr "Check free boundaries"
2601 msgid "MEN_CHECK_FREE_BNDS"
2602 msgstr "Check free boundaries"
2604 msgid "STB_CHECK_FREE_BNDS"
2605 msgstr "Check free boundaries"
2607 msgid "TOP_CHECK_FREE_FACES"
2608 msgstr "Check free faces"
2610 msgid "MEN_CHECK_FREE_FACES"
2611 msgstr "Check free faces"
2613 msgid "STB_CHECK_FREE_FACES"
2614 msgstr "Check free faces"
2616 msgid "MEN_MEASURES"
2619 msgid "TOP_POINT_COORDS"
2620 msgstr "Point coordinates"
2622 msgid "MEN_POINT_COORDS"
2623 msgstr "Point coordinates"
2625 msgid "STB_POINT_COORDS"
2626 msgstr "Point coordinates"
2628 msgid "TOP_BASIC_PROPS"
2629 msgstr "Basic properties"
2631 msgid "MEN_BASIC_PROPS"
2632 msgstr "Basic properties"
2634 msgid "STB_BASIC_PROPS"
2635 msgstr "Basic properties"
2637 msgid "TOP_MASS_CENTER"
2638 msgstr "Compute center of mass"
2640 msgid "MEN_MASS_CENTER"
2641 msgstr "Center of mass"
2643 msgid "STB_MASS_CENTER"
2644 msgstr "Compute center of mass"
2647 msgstr "Compute intertia"
2653 msgstr "Compute intertia"
2655 msgid "MEN_DIMENSIONS"
2659 msgstr "Compute bounding box"
2662 msgstr "Bounding box"
2665 msgstr "Compute bounding box"
2667 msgid "TOP_MIN_DIST"
2668 msgstr "Compute minimum distance"
2670 msgid "MEN_MIN_DIST"
2671 msgstr "Min distance"
2673 msgid "STB_MIN_DIST"
2674 msgstr "Compute minimum distance"
2676 msgid "TOP_TOLERANCE"
2677 msgstr "Compute tolerance"
2679 msgid "MEN_TOLERANCE"
2680 msgstr "Compute tolerance"
2682 msgid "STB_TOLERANCE"
2683 msgstr "Compute tolerance"
2703 msgid "TOP_CHECK_COMPOUND"
2704 msgstr "Check compound of blocks"
2706 msgid "MEN_CHECK_COMPOUND"
2707 msgstr "Check compound of blocks"
2709 msgid "STB_CHECK_COMPOUND"
2710 msgstr "Check compound of blocks"
2715 msgid "TOP_CHECK_GEOMETRY"
2716 msgstr "Check Geometry"
2718 msgid "MEN_CHECK_GEOMETRY"
2719 msgstr "Check Geometry"
2721 msgid "STB_CHECK_GEOMETRY"
2722 msgstr "Check Geometry"
2724 msgid "MEN_PREFERENCES"
2725 msgstr "Preferences"
2727 msgid "MEN_PREFERENCES_GEOM"
2730 msgid "TOP_SHADING_COLOR"
2731 msgstr "Set shading color"
2733 msgid "MEN_SHADING_COLOR"
2734 msgstr "Shading color"
2736 msgid "STB_SHADING_COLOR"
2737 msgstr "Set shading color"
2740 msgstr "Set number of isolines"
2746 msgstr "Set number of isolines"
2748 msgid "TOP_STEP_VALUE"
2749 msgstr "Set step value"
2751 msgid "MEN_STEP_VALUE"
2754 msgid "STB_STEP_VALUE"
2755 msgstr "Set step value"
2760 msgid "MEN_DISPLAY_MODE"
2761 msgstr "Display mode"
2769 msgid "MEN_WIREFRAME"
2775 msgid "TOP_DISPLAY_ALL"
2776 msgstr "Display all"
2778 msgid "MEN_DISPLAY_ALL"
2779 msgstr "Display all"
2781 msgid "STB_DISPLAY_ALL"
2782 msgstr "Display all"
2784 msgid "TOP_ERASE_ALL"
2787 msgid "MEN_ERASE_ALL"
2790 msgid "STB_ERASE_ALL"
2802 msgid "TOP_DISPLAY_ONLY"
2803 msgstr "Display only"
2805 msgid "MEN_DISPLAY_ONLY"
2806 msgstr "Display only"
2808 msgid "STB_DISPLAY_ONLY"
2809 msgstr "Display only"
2820 msgid "TOP_POP_RENAME"
2823 msgid "MEN_POP_RENAME"
2826 msgid "STB_POP_RENAME"
2829 msgid "TOP_POP_WIREFRAME"
2832 msgid "MEN_POP_WIREFRAME"
2835 msgid "STB_POP_WIREFRAME"
2838 msgid "TOP_POP_SHADING"
2841 msgid "MEN_POP_SHADING"
2844 msgid "STB_POP_SHADING"
2847 msgid "TOP_POP_COLOR"
2850 msgid "MEN_POP_COLOR"
2853 msgid "STB_POP_COLOR"
2856 msgid "TOP_POP_TRANSPARENCY"
2857 msgstr "Transparency"
2859 msgid "MEN_POP_TRANSPARENCY"
2860 msgstr "Transparency"
2862 msgid "STB_POP_TRANSPARENCY"
2863 msgstr "Transparency"
2865 msgid "TOP_POP_ISOS"
2868 msgid "MEN_POP_ISOS"
2871 msgid "STB_POP_ISOS"
2874 msgid "TOP_POP_CREATE_GROUP"
2875 msgstr "Create Group"
2877 msgid "MEN_POP_CREATE_GROUP"
2878 msgstr "Create Group"
2880 msgid "STB_POP_CREATE_GROUP"
2881 msgstr "Create Group"
2886 msgid "TOOL_PRIMITIVES"
2889 msgid "TOOL_BOOLEAN"
2890 msgstr "Boolean operations"
2892 msgid "TOOL_GENERATION"
2895 msgid "TOOL_TRANSFORMATION"
2896 msgstr "Transformation"
2904 msgid "GEOM_ERR_GET_ENGINE"
2905 msgstr "Failed to obtain GEOM Engine component. Reload Geometry module and try again."
2907 msgid "PREF_GROUP_OCCVIEWER"
2908 msgstr "OCC Viewer 3d"
2910 msgid "PREF_GROUP_GENERAL"
2913 msgid "PREF_SHADING_COLOR"
2914 msgstr "Default shading color"
2916 msgid "PREF_STEP_VALUE"
2917 msgstr "Step value for spin boxes"
2919 msgid "PREF_DISPLAY_MODE"
2920 msgstr "Default display mode"
2922 msgid "PREF_TAB_SETTINGS"