1 # Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
3 # Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
4 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
6 # This library is free software; you can redistribute it and/or
7 # modify it under the terms of the GNU Lesser General Public
8 # License as published by the Free Software Foundation; either
9 # version 2.1 of the License.
11 # This library is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 # Lesser General Public License for more details.
16 # You should have received a copy of the GNU Lesser General Public
17 # License along with this library; if not, write to the Free Software
18 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
22 # This is a Qt message file in .po format. Each msgid starts with
23 # a scope. This scope should *NOT* be translated - eg. translating
24 # from French to English, "Foo::Bar" would be translated to "Pub",
29 "Project-Id-Version: PROJECT VERSION\n"
30 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
31 "PO-Revision-Date: 2008-03-12 12:26+0300\n"
32 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
33 "Content-Type: text/plain; charset=iso-8859-1\n"
36 #==============================================================================
40 msgid "GEOM_BUT_APPLY"
44 msgid "GEOM_BUT_CLOSE"
48 msgid "GEOM_BUT_CANCEL"
68 msgid "GEOM_BUT_EXPLODE"
71 #NOT_FOUND_ANY error from some operations
73 msgstr "Not a single entity has been found"
76 #==============================================================================
79 #: GeometryGUI.cxx:563
80 msgid "GEOM_INF_LOADED"
81 msgstr "File %1 loaded."
84 #==============================================================================
87 #: GeometryGUI.cxx:3069
88 msgid "GEOM_PRP_COMMAND"
89 msgstr "No command associated with this id = %1."
91 #: GeometryGUI.cxx:4977
92 msgid "GEOM_PRP_ABORT"
93 msgstr "Operation aborted"
95 #: GeometryGUI.cxx:5058
97 msgstr "Operation done"
99 #: GeometryGUI.cxx:3717
100 msgid "GEOM_PRP_LOADING"
101 msgstr "Loading %1 ..."
103 #: GeometryGUI.cxx:1412
104 msgid "GEOM_PRP_NULLSHAPE"
105 msgstr "Error, null or inappropriate shape !"
107 #: GeometryGUI.cxx:5072
108 msgid "GEOM_PRP_READY"
111 #: GeometryGUI.cxx:1690
112 msgid "GEOM_PRP_SELECT_SUBSHAPES"
113 msgstr "Select Sub Shapes"
115 msgid "GEOM_PRP_EXPORT"
116 msgstr "Exporting geometry to %1 ..."
119 msgstr "Confirm operation"
121 msgid "GEOM_CONFIRM_INFO"
122 msgstr "Shape contains %1 sub shapes !"
125 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
126 msgstr "Not allowed in VTK viewer"
128 #: GeometryGUI.cxx:1690
129 msgid "GEOM_PRP_SHAPE_IN_STUDY"
130 msgstr "Main shape must be in the study before"
132 #: GeometryGUI.cxx:1690
133 msgid "GEOM_PRP_SELECT_EDGE"
134 msgstr "Select edges and click on Apply"
136 #: GeometryGUI.cxx:1690
137 msgid "GEOM_PRP_SELECT_FACE"
138 msgstr "Select faces to suppress and click on Ok/Apply"
140 #: GeometryGUI.cxx:1690
141 msgid "GEOM_PRP_SELECT_FIRST"
142 msgstr "Select main shape first"
144 #: GeometryGUI.cxx:1690
145 msgid "GEOM_PRP_MIN_DIST"
146 msgstr "Min Distance not computed"
148 msgid "GEOM_STUDY_LOCKED"
149 msgstr "The active study is locked and therefore cannot be modified"
152 #==============================================================================
155 #: GeometryGUI.cxx:3698
156 msgid "GEOM_MEN_ALL_FILES"
157 msgstr "All Files ( * )"
159 #: GeometryGUI.cxx:4389
160 msgid "GEOM_MEN_ANGLE"
163 #: GeometryGUI.cxx:3941
164 msgid "GEOM_MEN_COMPONENT"
167 #: GeometryGUI.cxx:4389
168 msgid "GEOM_MEN_ENTER_ANGLE"
169 msgstr "Enter An Angle In Degrees"
171 #: GeometryGUI.cxx:3758
172 msgid "GEOM_MEN_EXPORT"
175 #: GeometryGUI.cxx:3648
176 msgid "GEOM_MEN_IMPORT"
179 #: GeometryGUI.cxx:2931
180 msgid "GEOM_MEN_ISOS"
181 msgstr "Select Number Of Isos"
183 #: GeometryGUI.cxx:4278
184 msgid "GEOM_MEN_POPUP_NAME"
187 #: GeometryGUI.cxx:4414
188 msgid "GEOM_MEN_SKETCHER_X"
189 msgstr "Enter a Length to Set X"
191 #: GeometryGUI.cxx:4438
192 msgid "GEOM_MEN_SKETCHER_Y"
193 msgstr "Enter a Length to Set Y"
195 #: GeometryGUI.cxx:2898
196 msgid "GEOM_MEN_TRANSPARENCY"
197 msgstr "Transparency"
199 #: GeometryGUI.cxx:4413
203 #: GeometryGUI.cxx:4437
207 #: GeometryGUI_NbIsosDlg.cxx:36
208 msgid "GEOM_MEN_ISOU"
211 #: GeometryGUI_NbIsosDlg.cxx:53
212 msgid "GEOM_MEN_ISOV"
215 #: GeometryGUI_TransparencyDlg.cxx:31
216 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
217 msgstr "Transparency :"
219 msgid "GEOM_MEN_STEP_LABEL"
222 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
223 msgstr "Identical names : select by mouse !"
225 msgid "GEOM_NAME_INCORRECT"
226 msgstr "Object name not found"
228 msgid "GEOM_INCORRECT_INPUT"
229 msgstr "Incorrect input data!"
232 #==============================================================================
235 #: GeometryGUI.cxx:892
236 msgid "GEOM_WRN_RADIUS_NULL"
237 msgstr "Radius is null"
239 #: GeometryGUI.cxx:3854
240 msgid "GEOM_WRN_WARNING"
243 #: GeometryGUI.cxx:3854
244 msgid "GEOM_REALLY_DELETE"
245 msgstr "Do you really want to delete this %1 object(s):"
247 msgid "GEOM_DELETE_OBJECTS"
248 msgstr "Delete objects"
251 #==============================================================================
259 msgid "GEOM_MAIN_OBJECT"
263 msgid "GEOM_TOOL_OBJECT"
267 msgid "GEOM_BASE_OBJECT"
271 msgid "GEOM_PATH_OBJECT"
279 msgid "GEOM_OBJECT_I"
283 msgid "GEOM_OBJECT_RESULT"
284 msgstr "Object And Result"
291 msgid "GEOM_BASE_POINT"
295 msgid "GEOM_CENTER_POINT"
296 msgstr "Center Point"
299 msgid "GEOM_DIAGONAL_POINTS"
300 msgstr "Diagonal Points"
303 msgid "GEOM_CENTRAL_POINT"
304 msgstr "Central Point"
319 msgid "GEOM_ARGUMENTS"
331 msgid "GEOM_CONSTANT_RADIUS"
343 msgid "GEOM_RADIUS_I"
359 msgid "GEOM_COORDINATES"
372 msgstr "Both Directions"
375 msgid "GEOM_REVERSE_U"
379 msgid "GEOM_REVERSE_V"
395 msgid "GEOM_VECTOR_LENGTH"
396 msgstr "Vector Length :"
399 msgid "GEOM_REVERSE_VECTOR"
400 msgstr "Reverse Vector"
403 msgid "GEOM_POINT_MIRROR"
404 msgstr "Point Mirror"
407 msgid "GEOM_AXE_MIRROR"
411 msgid "GEOM_PLANE_MIRROR"
412 msgstr "Plane Mirror"
415 msgid "GEOM_FACE_SELECTION"
416 msgstr "Face Selection"
423 msgid "GEOM_WATER_DENSITY"
424 msgstr "Water Density :"
427 msgid "GEOM_MESHING_DEFLECTION"
428 msgstr "Meshing Deflect. :"
431 msgid "GEOM_DIMENSIONS"
435 msgid "GEOM_PRECISION"
439 msgid "GEOM_SELECTION"
443 msgid "GEOM_NB_TIMES"
447 msgid "GEOM_NB_TIMES_U"
448 msgstr "Nb. Times U :"
451 msgid "GEOM_NB_TIMES_V"
452 msgstr "Nb. Times V :"
467 #==============================================================================
471 msgid "GEOM_PARTITION"
474 #Half-space partition
475 msgid "GEOM_PARTITION_HALFSPACE"
476 msgstr "Half-space partition"
479 msgid "GEOM_TOLERANCE"
483 msgid "GEOM_ORIENTATION"
491 msgid "GEOM_REVOLUTION"
495 msgid "GEOM_ROTATION"
499 msgid "GEOM_ARCHIMEDE"
511 msgid "GEOM_DISTANCE"
527 msgid "GEOM_POSITION"
543 msgid "GEOM_TRANSLATION"
548 msgstr "Working Plane"
555 msgid "GEOM_EXTRUSION"
559 msgid "GEOM_SUB_SHAPE"
563 msgid "GEOM_SUPRESSFACE"
564 msgstr "Supress Face"
575 msgid "GEOM_CHECK_SHAPE"
578 #Check Blocks Compound
579 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
580 msgstr "Check and Improve Blocks Compound"
582 #Check Blocks Compound Errors
583 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
586 #Check Blocks Compound Errors
587 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
588 msgstr "The Compound of Blocks has no errors"
590 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
591 msgstr "The Compound of Blocks has errors"
593 #Check Blocks Compound SubShapes
594 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
595 msgstr "Incriminated Sub-Shapes"
603 msgstr "Bounding Box"
607 msgstr "Center Of Mass"
611 msgstr "Normal To A Face"
613 msgid "GEOM_VECTOR_NORMALE"
614 msgstr "Vector_Normal"
617 msgid "GEOM_PROPERTIES"
618 msgstr "Basic Properties"
621 msgid "GEOM_MULTITRANSLATION"
622 msgstr "Multi-Translation"
625 msgid "GEOM_MULTIROTATION"
626 msgstr "Multi-Rotation"
629 #==============================================================================
648 msgid "GEOM_ELLIPSE_TITLE"
649 msgstr "Ellipse Construction"
652 msgid "GEOM_RADIUS_MAJOR"
653 msgstr "Major radius :"
656 msgid "GEOM_RADIUS_MINOR"
657 msgstr "Minor radius :"
660 msgid "GEOM_COMPOUND"
664 msgid "GEOM_BLOCKS_COMPOUND"
665 msgstr "BlocksCompound"
668 msgid "GEOM_COMPOUNDSOLID"
676 msgid "GEOM_CYLINDER"
688 msgid "GEOM_PLANAR_FACE"
696 msgid "GEOM_FACE_OR_LCS"
736 msgid "GEOM_SURFCONE"
737 msgstr "Conical Face"
740 msgid "GEOM_SURFCYLINDER"
741 msgstr "Cylindrical Face"
744 msgid "GEOM_SURFSPHERE"
745 msgstr "Spherical Face"
748 msgid "GEOM_SURFTORUS"
749 msgstr "Toroidal Face"
760 msgid "GEOM_VECTOR_U"
764 msgid "GEOM_VECTOR_V"
784 msgstr "Imported_Shape"
787 msgid "GEOM_PARAMETER"
791 #==============================================================================
839 #==============================================================================
843 msgid "GEOM_STEP_TITLE"
844 msgstr "Step value for GUI constructions"
846 #: GeometryGUI_ArcDlg.cxx:45
847 msgid "GEOM_ARC_TITLE"
848 msgstr "Arc Construction"
850 #: GeometryGUI_ArchimedeDlg.cxx:55
851 msgid "GEOM_ARCHIMEDE_TITLE"
852 msgstr "Archimede Construction"
854 #: GeometryGUI_BndBoxDlg.cxx:59
855 msgid "GEOM_BNDBOX_TITLE"
856 msgstr "Bounding Box Informations"
858 #: GeometryGUI_BndBoxDlg.cxx:82
859 msgid "GEOM_BNDBOX_OBJDIM"
860 msgstr "Object And Its Dimensions"
862 #: GeometryGUI_BoxDlg.cxx:50
863 msgid "GEOM_BOX_TITLE"
864 msgstr "Box Construction"
866 #: GeometryGUI_BoxDlg.cxx:50
868 msgstr "Dimensions At Origin"
870 #: GeometryGUI_ChamferDlg.cxx:58
871 msgid "GEOM_CHAMFER_TITLE"
872 msgstr "Chamfer Construction"
874 #: GeometryGUI_ChamferDlg.cxx:58
875 msgid "GEOM_CHAMFER_ALL"
876 msgstr "Chamfer On Whole Shape"
878 #: GeometryGUI_ChamferDlg.cxx:58
879 msgid "GEOM_CHAMFER_EDGES"
880 msgstr "Chamfer On Edges From Shape"
882 #: GeometryGUI_ChamferDlg.cxx:58
883 msgid "GEOM_CHAMFER_EDGE"
884 msgstr "Chamfer On Selected Edges"
886 #: GeometryGUI_ChamferDlg.cxx:58
887 msgid "SELECTED_EDGE"
888 msgstr "Selected Edges"
890 #: GeometryGUI_ChamferDlg.cxx:58
891 msgid "GEOM_CHAMFER_FACES"
892 msgstr "Chamfer On Faces From Shape"
894 #: GeometryGUI_CircleDlg.cxx:48
895 msgid "GEOM_CIRCLE_TITLE"
896 msgstr "Circle Construction"
898 #: GeometryGUI_CenterMassDlg.cxx:77
899 msgid "GEOM_CMASS_TITLE"
900 msgstr "Center Of Mass Construction"
902 #: GeometryGUI_NormaleDlg.cxx:57
903 msgid "GEOM_NORMALE_TITLE"
904 msgstr "Create Normal To A Face"
906 msgid "GEOM_PLANE_SIZE"
907 msgstr "Size of plane :"
909 #: GeometryGUI_CommonDlg.cxx:47
910 msgid "GEOM_COMMON_TITLE"
911 msgstr "BOOLEAN : Common Of Two Objects"
913 #: GeometryGUI_CompoundDlg.cxx:44
914 msgid "GEOM_COMPOUND_TITLE"
915 msgstr "Create A Compound"
917 #: GeometryGUI_ConeDlg.cxx:49
918 msgid "GEOM_CONE_TITLE"
919 msgstr "Cone Construction"
921 #: GeometryGUI_CutDlg.cxx:48
922 msgid "GEOM_CUT_TITLE"
923 msgstr "BOOLEAN : Cut Of Two Objects"
925 #: GeometryGUI_CylinderDlg.cxx:47
926 msgid "GEOM_CYLINDER_TITLE"
927 msgstr "Cylinder Construction"
929 #: GeometryGUI_CheckShape.cxx:60
930 msgid "GEOM_CHECK_TITLE"
931 msgstr "Check Shape Informations"
933 #: GeometryGUI_CheckShape.cxx:83
934 msgid "GEOM_CHECK_INFOS"
935 msgstr "Object And Its Topological Informations"
937 #: GeometryGUI_DistanceDlg.cxx:57
938 msgid "GEOM_MINDIST_TITLE"
939 msgstr "Minimun Distance Between Two Objects"
941 #: GeometryGUI_DistanceDlg.cxx:57
942 msgid "GEOM_MINDIST_OBJ"
943 msgstr "Objects And Results"
945 #: GeometryGUI_AngleDlg.cxx:82
946 msgid "GEOM_MEASURE_ANGLE_TITLE"
947 msgstr "Angle Between Two Straight Edges/Lines/Vectors"
949 #: GeometryGUI_AngleDlg.cxx:86
950 msgid "GEOM_MEASURE_ANGLE_ANGLE"
953 #: GeometryGUI_AngleDlg.cxx:90
954 msgid "GEOM_MEASURE_ANGLE_OBJ"
955 msgstr "Objects And Results"
957 #: GeometryGUI_AngleDlg.cxx:93
958 msgid "GEOM_MEASURE_ANGLE_IS"
959 msgstr "Angle in degrees :"
961 #: GeometryGUI_EdgeDlg.cxx:47
962 msgid "GEOM_EDGE_TITLE"
963 msgstr "Create An Edge"
965 #: GeometryGUI_FilletDlg.cxx:58
966 msgid "GEOM_FILLET_TITLE"
967 msgstr "Fillet Construction"
969 #: GeometryGUI_FilletDlg.cxx:58
970 msgid "GEOM_FILLET_ALL"
971 msgstr "Fillet On Whole Shape"
973 #: GeometryGUI_FilletDlg.cxx:58
974 msgid "GEOM_FILLET_EDGES"
975 msgstr "Fillet On Edges From Shape"
977 #: GeometryGUI_FilletDlg.cxx:58
978 msgid "GEOM_FILLET_FACES"
979 msgstr "Fillet On Faces From Shape"
981 #: GeometryGUI_FaceDlg.cxx:49
982 msgid "GEOM_FACE_TITLE"
983 msgstr "Create A Face"
985 #: GeometryGUI_FaceDlg.cxx:78
986 msgid "GEOM_FACE_FFW"
987 msgstr "Face creation from wires and/or edges"
989 #: GeometryGUI_FaceDlg.cxx:103
990 msgid "GEOM_FACE_OPT"
991 msgstr "Try to create a planar face"
993 #: GeometryGUI_FillingDlg.cxx:53
994 msgid "GEOM_FILLING_TITLE"
995 msgstr "Filling Surface With Edges"
997 #: GeometryGUI_FillingDlg.cxx:112
998 msgid "GEOM_FILLING_ARG"
999 msgstr "Arguments And Parameters"
1001 #: GeometryGUI_FillingDlg.cxx:128
1002 msgid "GEOM_FILLING_MIN_DEG"
1005 #: GeometryGUI_FillingDlg.cxx:142
1006 msgid "GEOM_FILLING_MAX_DEG"
1009 #: GeometryGUI_FillingDlg.cxx:150
1010 msgid "GEOM_FILLING_TOL_2D"
1013 #: GeometryGUI_FillingDlg.cxx:170
1014 msgid "GEOM_FILLING_COMPOUND"
1015 msgstr "Edges compound"
1017 #: GeometryGUI_FillingDlg.cxx:184
1018 msgid "GEOM_FILLING_TOL_3D"
1021 #: GeometryGUI_FillingDlg.cxx:192
1022 msgid "GEOM_FILLING_NB_ITER"
1025 #: GeometryGUI_FuseDlg.cxx:48
1026 msgid "GEOM_FUSE_TITLE"
1027 msgstr "BOOLEAN : Fuse Two Objects"
1029 #: GeometryGUI_InertiaDlg.cxx:42
1030 msgid "GEOM_INERTIA_TITLE"
1031 msgstr "Calculs Of Inertia"
1033 #: GeometryGUI_InertiaDlg.cxx:50
1034 msgid "GEOM_INERTIA_CONSTR"
1035 msgstr "Matrix And Moments Of Inertia"
1037 #: GeometryGUI_InertiaDlg.cxx:100
1038 msgid "GEOM_INERTIA_I"
1041 #: GeometryGUI_InertiaDlg.cxx:182
1042 msgid "GEOM_INERTIA_IXYZ"
1043 msgstr "IX & IY & IZ :"
1045 #: GeometryGUI_LineDlg.cxx:50
1046 msgid "GEOM_LINE_TITLE"
1047 msgstr "Line Construction"
1049 #: GeometryGUI_MaxToleranceDlg.cxx:53
1050 msgid "GEOM_TOLERANCE_TITLE"
1051 msgstr "Maximum Tolerance"
1053 #: GeometryGUI_MaxToleranceDlg.cxx:84
1054 msgid "GEOM_TOLERANCE_CONSTR"
1055 msgstr "Object And Its Tolerances"
1057 #: GeometryGUI_MaxToleranceDlg.cxx:121
1058 msgid "GEOM_TOLERANCE_FACE"
1061 #: GeometryGUI_MaxToleranceDlg.cxx:138
1062 msgid "GEOM_TOLERANCE_EDGE"
1065 #: GeometryGUI_MaxToleranceDlg.cxx:155
1066 msgid "GEOM_TOLERANCE_VERTEX"
1069 #: GeometryGUI_MirrorDlg.cxx:52
1070 msgid "GEOM_MIRROR_TITLE"
1071 msgstr "Mirror An Object"
1073 #: GeometryGUI_OrientationDlg.cxx:46
1074 msgid "GEOM_ORIENTATION_TITLE"
1075 msgstr "Change Orientation"
1077 #: GeometryGUI_OrientationDlg.cxx:134
1078 msgid "GEOM_ORIENTATION_OPT"
1079 msgstr "Reverse orientation with normal vectors simulation"
1081 #: GeometryGUI_PartitionDlg.cxx:45
1082 msgid "GEOM_PARTITION_TITLE"
1083 msgstr "Partition Of Object With Tool"
1085 #: GeometryGUI_PartitionDlg.cxx:45
1086 msgid "GEOM_KEEP_OBJECT"
1087 msgstr "Keep Object"
1089 #: GeometryGUI_PartitionDlg.cxx:45
1090 msgid "GEOM_PARTITION_ORIENTATION"
1091 msgstr "Change Orientation"
1093 #: GeometryGUI_PartitionDlg.cxx:45
1094 msgid "SUPPRESS_RESULT"
1095 msgstr "Suppress Result"
1097 msgid "GEOM_REMOVE_WEBS"
1098 msgstr "Remove webs"
1100 msgid "GEOM_SET_MATERIALS"
1101 msgstr "Set materials"
1103 #: OperationGUI_MaterialDlg.cxx:45
1104 msgid "GEOM_MATERIAL_TITLE"
1105 msgstr "Define materials for Dominant Fuse"
1107 msgid "GEOM_MATERIAL_SHAPE"
1110 msgid "GEOM_MATERIAL_MATERIAL"
1113 msgid "GEOM_MATERIAL_ID"
1114 msgstr "Material ID:"
1116 msgid "GEOM_MATERIAL_SET"
1119 #: GeometryGUI_PipeDlg.cxx:47
1120 msgid "GEOM_PIPE_TITLE"
1121 msgstr "Pipe Construction"
1123 #: GeometryGUI_PointDlg.cxx:52
1124 msgid "GEOM_POINT_TITLE"
1125 msgstr "Point Construction"
1127 #: GeometryGUI_PlaneDlg.cxx:60
1128 msgid "GEOM_PLANE_TITLE"
1129 msgstr "Plane Construction"
1131 #: GeometryGUI_PlaneDlg.cxx:172
1132 msgid "GEOM_PLANE_PVC"
1133 msgstr "Point + Coordinate Vector"
1135 #: GeometryGUI_PlaneDlg.cxx:133
1136 msgid "GEOM_PLANE_PV"
1137 msgstr "Point + Vector"
1139 #: GeometryGUI_PrismDlg.cxx:54
1140 msgid "GEOM_EXTRUSION_TITLE"
1141 msgstr "Construction by Extrusion"
1143 #: GeometryGUI_PrismDlg.cxx:83
1144 msgid "GEOM_EXTRUSION_BSV"
1145 msgstr "Base Shape + Vector"
1147 msgid "GEOM_EXTRUSION_BSV_2P"
1148 msgstr "Base Shape + 2 Points"
1150 #: GeometryGUI_PropertiesDlg.cxx:56
1151 msgid "GEOM_PROPERTIES_TITLE"
1152 msgstr "Basic Properties Informations"
1154 #: GeometryGUI_PropertiesDlg.cxx:78
1155 msgid "GEOM_PROPERTIES_CONSTR"
1156 msgstr "Object And Its Properties"
1158 #: GeometryGUI_PropertiesDlg.cxx:114
1159 msgid "GEOM_PROPERTIES_SURFACE"
1160 msgstr "Surface is :"
1162 #: GeometryGUI_PropertiesDlg.cxx:120
1163 msgid "GEOM_PROPERTIES_VOLUME"
1164 msgstr "Volume is :"
1166 #: GeometryGUI_RevolDlg.cxx:49
1167 msgid "GEOM_REVOLUTION_TITLE"
1168 msgstr "Construction By Revolution"
1170 #: GeometryGUI_RotationDlg.cxx:51
1171 msgid "GEOM_ROTATION_TITLE"
1172 msgstr "Rotation Of An Object"
1174 #: GeometryGUI_ScaleDlg.cxx:52
1175 msgid "GEOM_SCALE_TITLE"
1176 msgstr "Scale An Object"
1178 #: GeometryGUI_PositionDlg.cxx:52
1179 msgid "GEOM_POSITION_TITLE"
1180 msgstr "Modify the Location of an Object"
1182 #: GeometryGUI_PositionDlg.cxx:52
1183 msgid "GEOM_START_LCS"
1186 #: GeometryGUI_PositionDlg.cxx:52
1187 msgid "GEOM_END_LCS"
1190 #: GeometryGUI_OffsetDlg.cxx:53
1191 msgid "GEOM_OFFSET_TITLE"
1192 msgstr "Offset Surface"
1194 #: GeometryGUI_ScaleDlg.cxx:117
1195 msgid "GEOM_SCALE_FACTOR"
1196 msgstr "Scale Factor :"
1198 #: GeometryGUI_SectionDlg.cxx:50
1199 msgid "GEOM_SECTION_TITLE"
1200 msgstr "BOOLEAN : Section Of Two Objects"
1202 #: GeometryGUI_SewingDlg.cxx:48
1203 msgid "GEOM_SEWING_TITLE"
1204 msgstr "Topological sewing"
1206 #: GeometryGUI_ShellDlg.cxx:53
1207 msgid "GEOM_SHELL_TITLE"
1208 msgstr "Shell Construction"
1210 #: GeometryGUI_SolidDlg.cxx:74
1211 msgid "GEOM_SOLID_TITLE"
1212 msgstr "Solid Construction"
1214 #: GeometryGUI_SphereDlg.cxx:50
1215 msgid "GEOM_SPHERE_TITLE"
1216 msgstr "Sphere Construction"
1218 #: GeometryGUI_SphereDlg.cxx:113
1219 msgid "GEOM_SPHERE_CR"
1220 msgstr "Center + Radius"
1222 #: GeometryGUI_SphereDlg.cxx:146
1223 msgid "GEOM_SPHERE_RO"
1224 msgstr "Radius At Origin"
1226 #: GeometryGUI_SubShapeDlg.cxx:55
1227 msgid "GEOM_SUBSHAPE_TITLE"
1228 msgstr "Sub Shapes Selection"
1230 #: GeometryGUI_SubShapeDlg.cxx:131
1231 msgid "GEOM_SUBSHAPE_TYPE"
1232 msgstr "Sub Shapes Type :"
1234 #: GeometryGUI_SubShapeDlg.cxx:137
1235 msgid "GEOM_SUBSHAPE_SELECT"
1236 msgstr "Select Sub Shapes"
1238 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1239 msgstr "Please, select one or more sub-shapes"
1241 #: GeometryGUI_TorusDlg.cxx:51
1242 msgid "GEOM_TORUS_TITLE"
1243 msgstr "Torus Construction"
1245 #: GeometryGUI_SuppressFacesDlg.cxx:103
1246 msgid "GEOM_SUPRESSFACE_TITLE"
1247 msgstr "Suppress Faces In An Object"
1249 #: GeometryGUI_SuppressFacesDlg.cxx:164
1250 msgid "GEOM_SUPRESSFACE_SELECT"
1251 msgstr "Select Faces To Suppress"
1253 #: GeometryGUI_TranslationDlg.cxx:78
1254 msgid "GEOM_TRANSLATION_COOR"
1255 msgstr "Translation With Coordinates"
1257 msgid "GEOM_TRANSPARENCY_TITLE"
1258 msgstr "Transparency"
1260 msgid "GEOM_TRANSPARENCY_OPAQUE"
1263 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1264 msgstr "Transparent"
1266 msgid "GEOM_SUPPRESSHOLE_TITLE"
1267 msgstr "Suppress holes"
1269 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1270 msgstr "Select the face with hole"
1272 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1273 msgstr "Select wire on face"
1275 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1276 msgstr "Select end face (if hole traversing)"
1278 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1279 msgstr "Select end wire (if hole traversing)"
1281 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1282 msgstr "Face or shell"
1284 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1285 msgstr "Select hole(s) on the face"
1287 #: GeometryGUI_TranslationDlg.cxx:56
1288 msgid "GEOM_TRANSLATION_TITLE"
1289 msgstr "Translation Of An Object"
1291 #: GeometryGUI_VectorDlg.cxx:54
1292 msgid "GEOM_VECTOR_TITLE"
1293 msgstr "Vector Construction"
1295 #: GeometryGUI_WhatisDlg.cxx:63
1296 msgid "GEOM_WHATIS_TITLE"
1297 msgstr "Whatis Informations"
1299 #: GeometryGUI_WhatisDlg.cxx:86
1300 msgid "GEOM_WHATIS_OBJECT"
1301 msgstr "Object And Its Topological Informations"
1303 #: GeometryGUI_WireDlg.cxx:46
1304 msgid "GEOM_WIRE_TITLE"
1305 msgstr "Create A Wire"
1307 #: GeometryGUI_WireDlg.cxx:103
1308 msgid "GEOM_WIRE_CONNECT"
1309 msgstr "Wire creation from wires/edges connected"
1311 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1312 msgid "GEOM_WPLANE_TITLE"
1313 msgstr "Working Plane Selection"
1315 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1316 msgid "GEOM_WPLANE_FACE"
1317 msgstr "Plane, Planar Face or LCS"
1319 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1320 msgid "GEOM_WPLANE_VECTOR"
1321 msgstr "Select 2 vectors"
1323 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1324 msgid "GEOM_WPLANE_VX"
1327 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1328 msgid "GEOM_WPLANE_VZ"
1331 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1332 msgid "GEOM_WPLANE_ORIGIN"
1333 msgstr "Select a plane"
1335 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1336 msgid "GEOM_WPLANE_OYZ"
1339 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1340 msgid "GEOM_WPLANE_OZX"
1343 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1344 msgid "GEOM_WPLANE_OXY"
1347 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1348 msgid "GEOM_REVERSE_PLANE"
1349 msgstr "Reverse the plane normal"
1351 #: GeometryGUI_multiTranslationDlg.cxx:107
1352 msgid "GEOM_MULTITRANSLATION_TITLE"
1353 msgstr "Multi-Translation"
1355 #: GeometryGUI_multiTranslationDlg.cxx:107
1356 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1357 msgstr "Multi Translation Simple"
1359 #: GeometryGUI_multiTranslationDlg.cxx:107
1360 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1361 msgstr "Multi Translation Double"
1363 #: GeometryGUI_multiRotationDlg.cxx:107
1364 msgid "GEOM_MULTIROTATION_TITLE"
1365 msgstr "Multi-Rotation"
1367 #: GeometryGUI_multiRotationDlg.cxx:107
1368 msgid "GEOM_MULTIROTATION_SIMPLE"
1369 msgstr "Multi Rotation Simple"
1371 #: GeometryGUI_multiRotationDlg.cxx:107
1372 msgid "GEOM_MULTIROTATION_DOUBLE"
1373 msgstr "Multi Rotation Double"
1375 msgid "GEOM_PARAM_POINT"
1376 msgstr "Parametric point"
1378 msgid "GEOM_REF_POINT"
1379 msgstr "Point with reference"
1381 msgid "GEOM_LINE_INTERSECTION"
1382 msgstr "Point On Lines Intersection"
1385 #==============================================================================
1388 #: GeometryGUI.cxx:4613
1389 msgid "GEOM_MEN_WIREFRAME"
1392 #: GeometryGUI.cxx:4613
1393 msgid "GEOM_MEN_SHADING"
1396 msgid "GEOM_RECONSTRUCTION_LIMIT"
1397 msgstr "Reconstruction Limit"
1399 msgid "GEOM_KEEP_NONLIMIT_SHAPES"
1400 msgstr "Keep nonlimit shapes"
1402 msgid "GEOM_SUPPRESS_RESULT"
1403 msgstr "Suppress Result"
1405 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1408 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1411 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1413 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1415 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1417 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1419 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1421 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1423 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1426 msgid "GEOM_SPLINE_TITLE"
1427 msgstr "Spline Construction"
1432 msgid "GEOM_INTERPOL"
1433 msgstr "Interpolation"
1436 #==============================================================================
1439 msgid "GEOM_SKETCHER_EL"
1440 msgstr "Element Type"
1442 msgid "GEOM_BUT_CLOSE_SKETCH"
1443 msgstr "Sketch Closure"
1445 msgid "GEOM_BUT_END_SKETCH"
1446 msgstr "Sketch Validation"
1448 msgid "GEOM_SKETCHER_TITLE"
1449 msgstr "Sketch Construction"
1451 msgid "GEOM_SKETCHER_POINT"
1454 msgid "GEOM_SKETCHER_SEGMENT"
1457 msgid "GEOM_SKETCHER_ARC"
1460 msgid "GEOM_SKETCHER_DIR"
1463 msgid "GEOM_SKETCHER_POINT2"
1466 msgid "GEOM_SKETCHER_DEST"
1467 msgstr "Destination"
1469 msgid "GEOM_SKETCHER_ABS"
1472 msgid "GEOM_SKETCHER_REL"
1475 msgid "GEOM_SKETCHER_SEL"
1478 msgid "GEOM_SKETCHER_ANGLE"
1481 msgid "GEOM_SKETCHER_PER"
1482 msgstr "Perpendicular"
1484 msgid "GEOM_SKETCHER_TAN"
1487 msgid "GEOM_SKETCHER_VXVY"
1490 msgid "GEOM_SKETCHER_LENGTH"
1493 msgid "GEOM_SKETCHER_X"
1496 msgid "GEOM_SKETCHER_Y"
1499 msgid "GEOM_SKETCHER_X2"
1502 msgid "GEOM_SKETCHER_Y2"
1505 msgid "GEOM_SKETCHER_X3"
1508 msgid "GEOM_SKETCHER_Y3"
1511 msgid "GEOM_SKETCHER_DX2"
1514 msgid "GEOM_SKETCHER_DY2"
1517 msgid "GEOM_SKETCHER_VX2"
1520 msgid "GEOM_SKETCHER_VY2"
1523 msgid "GEOM_SKETCHER_LENGTH2"
1526 msgid "GEOM_SKETCHER_ANGLE2"
1529 msgid "GEOM_SKETCHER_RADIUS2"
1532 msgid "GEOM_SKETCHER_UNDO"
1535 msgid "GEOM_SKETCHER_APPLY"
1538 msgid "GEOM_SKETCHER_VALUES"
1541 msgid "GEOM_SKETCHER_TYPE"
1544 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1545 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1547 msgid "GEOM_FILLET_ABORT"
1548 msgstr "Fillet can't be computed with radius %1"
1550 msgid "GEOM_CHAMFER_ABORT"
1551 msgstr "Chamfer can't be computed with %1 and %2"
1553 msgid "GEOM_3_POINTS"
1556 msgid "GEOM_CENTER_2POINTS"
1557 msgstr "Center and two points"
1568 msgid "GEOM_CREATE_COPY"
1569 msgstr "Create a copy"
1571 msgid "GEOM_CREATE_SINGLE_SOLID"
1572 msgstr "Create a single solid"
1577 msgid "GEOM_ERROR_STATUS"
1578 msgstr "Operation status"
1580 msgid "GEOM_ELLIPSE_ERROR_1"
1581 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1586 msgid "GEOM_POLYLINE"
1592 msgid "GEOM_CURVE_TITLE"
1593 msgstr "Curve Construction"
1595 # ShapeProcessDlg.cxx
1596 msgid "GEOM_SHAPEPROCESS_TITLE"
1597 msgstr "Shape Processing"
1602 msgid "GEOM_SELECTED_OBJECTS"
1603 msgstr "Selected objects"
1605 msgid "GEOM_OPERATIONS"
1608 msgid "GEOM_PARAMETERS"
1611 msgid "GEOM_FixShape"
1614 msgid "GEOM_FixFaceSize"
1615 msgstr "FixFaceSize"
1617 msgid "GEOM_DropSmallEdges"
1618 msgstr "DropSmallEdges"
1620 msgid "GEOM_SplitAngle"
1623 msgid "GEOM_SplitClosedFaces"
1624 msgstr "SplitClosedFaces"
1626 msgid "GEOM_SplitContinuity"
1627 msgstr "SplitContinuity"
1629 msgid "GEOM_BSplineRestriction"
1630 msgstr "BSplineRestriction"
1632 msgid "GEOM_ToBezier"
1635 msgid "GEOM_SameParameter"
1636 msgstr "SameParameter"
1638 msgid "GEOM_3D_TOLERANCE"
1639 msgstr "3D tolerance"
1641 msgid "GEOM_MAX_3D_TOLERANCE"
1642 msgstr "Max 3D tolerance"
1644 msgid "GEOM_MAX_TOLERANCE"
1645 msgstr "Max tolerance"
1647 msgid "GEOM_ANGLE_1"
1650 msgid "GEOM_NUM_SPLIT_POINTS"
1651 msgstr "Number of splitting points"
1653 msgid "GEOM_SURFACE_CONTINUTY"
1654 msgstr "Surface continuity"
1656 msgid "GEOM_CURVE_CONTINUTY"
1657 msgstr "Curve continuity"
1659 msgid "GEOM_SURFACE_MODE"
1660 msgstr "Surface mode"
1662 msgid "GEOM_3D_CURVE_MODE"
1663 msgstr "3D curve mode"
1665 msgid "GEOM_2D_CURVE_MODE"
1666 msgstr "2D curve mode"
1668 msgid "GEOM_2D_TOLERANCE"
1669 msgstr "2D tolerance"
1671 msgid "GEOM_REQUIRED_DEGREE"
1672 msgstr "Required degree"
1674 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1675 msgstr "Required number of segments"
1677 msgid "GEOM_3D_CONTINUTY"
1678 msgstr "3D continuity"
1680 msgid "GEOM_2D_CONTINUTY"
1681 msgstr "2D continuity"
1683 msgid "GEOM_CLOSECONTOUR_TITLE"
1684 msgstr "Close contour"
1686 msgid "GEOM_ERR_LIB_NOT_FOUND"
1687 msgstr "GUI library corresponding to the user action can not be found or loaded"
1689 msgid "OperationGUI_ChamferDlg::FACE_1"
1692 msgid "OperationGUI_ChamferDlg::FACE_2"
1695 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1696 msgstr "Selected faces"
1698 msgid "OperationGUI_ChamferDlg::D"
1701 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1702 msgstr "Selected edges"
1704 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1705 msgstr "Selected faces"
1707 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1708 msgstr "Suppress internal wires"
1710 msgid "GEOM_INTERNAL_WIRES"
1711 msgstr "Internal wires"
1713 msgid "GEOM_SELECTED_FACE"
1714 msgstr "Selected face"
1716 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1717 msgstr "Remove all internal wires"
1719 msgid "GEOM_REMOVE_HOLES_TITLE"
1720 msgstr "Suppress holes"
1722 msgid "GEOM_SELECTED_SHAPE"
1723 msgstr "Selected shape"
1725 msgid "GEOM_REMOVE_ALL_HOLES"
1726 msgstr "Remove all holes"
1731 msgid "GEOM_WIRES_TO_REMOVE"
1732 msgstr "Wires to remove"
1737 msgid "GEOM_FREE_BOUNDARIES"
1738 msgstr "Free boundaries"
1740 msgid "GEOM_FREE_FACES"
1743 msgid "GEOM_CHANGE_ORIENTATION_TITLE"
1744 msgstr "Change orientation"
1746 msgid "GEOM_CHANGE_ORIENTATION"
1747 msgstr "Objects to change orientation"
1749 msgid "GEOM_REMOVE_EXTRA_EDGES_TITLE"
1750 msgstr "Remove extra edges"
1752 msgid "GEOM_REMOVE_EXTRA_EDGES"
1753 msgstr "Object to remove extra edges"
1755 msgid "GEOM_BY_PARAMETER"
1756 msgstr "By parameter"
1758 msgid "GEOM_BY_LENGTH"
1761 msgid "GEOM_DIVIDE_EDGE_TITLE"
1762 msgstr "Addition of point"
1764 msgid "GEOM_ADD_POINT"
1770 msgid "GEOM_MARKER_TITLE"
1771 msgstr "Create marker"
1776 msgid "GEOM_TRIHEDRON"
1779 msgid "GEOM_FREE_BOUNDS_MSG"
1780 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1782 msgid "GEOM_FREE_BOUNDS_ERROR"
1783 msgstr "Object is not selected"
1785 msgid "GEOM_FREE_BOUNDS_TLT"
1786 msgstr "Free boundary detection"
1788 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1789 msgstr "Check free boundaries"
1791 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1792 msgstr "Free boundaries"
1794 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1795 msgstr "Number of closed free boundaries: "
1797 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1798 msgstr "Number of open free boundaries: "
1800 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1801 msgstr "Please, select at least one Shape Process operation to proceed."
1803 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1804 msgstr "Please, select a geometrical object for Shape Processing."
1806 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1807 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1809 msgid "MeasureGUI_PointDlg::POINT"
1812 msgid "MeasureGUI_PointDlg::X"
1815 msgid "MeasureGUI_PointDlg::Y"
1818 msgid "MeasureGUI_PointDlg::Z"
1821 msgid "MeasureGUI_PointDlg::CAPTION"
1822 msgstr "Point Coordinates"
1824 msgid "MeasureGUI_PointDlg::COORDINATES"
1825 msgstr "Point and its coordinates"
1827 msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
1828 msgstr "Check also geometry"
1830 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1831 msgstr "Create Group"
1833 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1836 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1839 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1842 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1843 msgstr "Main Shape And Sub-Shapes"
1845 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1848 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1849 msgstr "Select Sub-Shapes"
1851 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1854 msgid "GroupGUI_GroupDlg::ADD"
1857 msgid "GroupGUI_GroupDlg::REMOVE"
1860 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1863 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1864 msgstr "Please, specify a non-empty group name"
1866 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1867 msgstr "Please, select a main shape"
1869 msgid "GroupGUI_GroupDlg::NO_GROUP"
1870 msgstr "Please, select a group to edit"
1872 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1873 msgstr "Please, select one or more sub-shapes to put into the group"
1875 msgid "GroupGUI::NO_GROUP"
1876 msgstr "Please, select a group to edit"
1883 msgid "WRN_NOT_IMPLEMENTED"
1884 msgstr "Sorry, this functionality is not yet implemented"
1886 ### BlocksGUI_TrsfDlg ###
1888 msgid "BlocksGUI_TrsfDlg::FACE_1"
1891 msgid "BlocksGUI_TrsfDlg::FACE_2"
1894 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1897 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1900 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1903 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1906 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1907 msgstr "Block Multi-Transformation"
1909 msgid "GEOM_BLOCK_MULTITRSF"
1910 msgstr "Block Multi-Transformation"
1912 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1913 msgstr "Multi-Transformation Simple"
1915 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1916 msgstr "Multi-Transformation Double"
1918 ### BlocksGUI_QuadFaceDlg ###
1920 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1923 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1926 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1929 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1932 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1935 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1938 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1941 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1944 msgid "GEOM_QUAD_FACE_TITLE"
1945 msgstr "Quadrangle Face Construction"
1947 msgid "GEOM_QUAD_FACE"
1948 msgstr "Quadrangle Face"
1950 ### BlocksGUI_BlockDlg ###
1952 msgid "BlocksGUI_BlockDlg::FACE_1"
1955 msgid "BlocksGUI_BlockDlg::FACE_2"
1958 msgid "BlocksGUI_BlockDlg::FACE_3"
1961 msgid "BlocksGUI_BlockDlg::FACE_4"
1964 msgid "BlocksGUI_BlockDlg::FACE_5"
1967 msgid "BlocksGUI_BlockDlg::FACE_6"
1970 msgid "GEOM_BLOCK_TITLE"
1971 msgstr "Hexahedral Solid Construction"
1974 msgstr "Hexahedral Solid"
1976 #==============================================================================
1978 msgid "BasicGUI_MarkerDlg::CAPTION"
1979 msgstr "Local CS Construction"
1981 msgid "BasicGUI_MarkerDlg::LOCALCS"
1982 msgstr "Local coordinate system"
1984 msgid "BasicGUI_MarkerDlg::ORIGIN"
1985 msgstr "Coordinates of origin"
1987 msgid "BasicGUI_MarkerDlg::XDIR"
1988 msgstr "X axis direction"
1990 msgid "BasicGUI_MarkerDlg::YDIR"
1991 msgstr "Y axis direction"
1993 msgid "BasicGUI_MarkerDlg::DX"
1996 msgid "BasicGUI_MarkerDlg::DY"
1999 msgid "BasicGUI_MarkerDlg::DZ"
2002 msgid "BasicGUI_MarkerDlg::LCS_NAME"
2005 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
2006 msgstr "Coordinate system axes cannot be parallel"
2038 ### BlocksGUI_ExplodeDlg ###
2040 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
2041 msgstr "Min. nb. faces"
2043 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
2044 msgstr "Max. nb. faces"
2046 msgid "GEOM_BLOCK_EXPLODE_TITLE"
2047 msgstr "Sub Blocks Selection"
2049 msgid "GEOM_BLOCK_EXPLODE"
2052 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
2053 msgstr "There are %1 specified blocks and NO other solids"
2055 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
2056 msgstr "There are %1 specified blocks and some other solids"
2058 msgid "ShHealOper_NotError_msg"
2059 msgstr "Shape Healing algorithm has done no modification of the original shape"
2061 msgid "ShHealOper_InvalidParameters_msg"
2062 msgstr "Incorrect parameters for Shape Healing algorithm"
2064 msgid "ShHealOper_ErrorExecution_msg"
2065 msgstr "Shape Healing algorithm failed"
2067 msgid "GEOM_GLUE_TITLE"
2073 msgid "RepairGUI_GlueDlg::SELECT_FACES"
2074 msgstr "Select Faces"
2076 msgid "RepairGUI_GlueDlg::FACES_FOR_GLUING_ARE_DETECTED"
2077 msgstr "There are %1 face(s) that can be glued. They are coloured on the screen with red colour\nPlease close this message box and select faces for glueing"
2079 msgid "RepairGUI_GlueDlg::GLUE_FACES"
2082 msgid "RepairGUI_GlueDlg::THERE_ARE_NO_FACES_FOR_GLUING"
2083 msgstr "There are no faces for gluing"
2085 msgid "GEOM_FREE_FACES_TITLE"
2088 ### New object names for RepairGUI ###
2089 msgid "SEWING_NEW_OBJ_NAME"
2092 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
2095 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
2096 msgstr "CloseContour"
2098 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
2099 msgstr "SupressHoles"
2101 msgid "GLUE_NEW_OBJ_NAME"
2104 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
2105 msgstr "RemoveIntWires"
2107 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
2108 msgstr "ProcessShape"
2110 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
2111 msgstr "SupressFaces"
2113 msgid "CHANGE_ORIENTATION_NEW_OBJ_NAME"
2116 msgid "REMOVE_EXTRA_EDGES_NEW_OBJ_NAME"
2117 msgstr "NoExtraEdges"
2119 msgid "NON_GEOM_OBJECTS_SELECTED"
2120 msgstr "There are objects selected which do not belong to %1 component."
2122 msgid "GEOM_PROPAGATE_TITLE"
2125 msgid "GEOM_PROPAGATE"
2128 ### Menu of GEOM module ###
2133 msgstr "Import geometry from BREP file"
2139 msgstr "Import geometry from BREP file"
2142 msgstr "Export geometry to BREP file"
2148 msgstr "Export geometry to BREP file"
2154 msgstr "Delete object"
2160 msgstr "Delete object"
2162 msgid "MEN_NEW_ENTITY"
2169 msgstr "Create a point"
2175 msgstr "Create a point"
2178 msgstr "Create a line"
2184 msgstr "Create a line"
2187 msgstr "Create a circle"
2193 msgstr "Create a circle"
2196 msgstr "Create an ellipse"
2202 msgstr "Create an ellipse"
2205 msgstr "Create an arc"
2211 msgstr "Create an arc"
2214 msgstr "Create a curve"
2220 msgstr "Create a curve"
2223 msgstr "Create a vector"
2229 msgstr "Create a vector"
2232 msgstr "Create a plane"
2238 msgstr "Create a plane"
2240 msgid "TOP_WORK_PLANE"
2241 msgstr "Create a working plane"
2243 msgid "MEN_WORK_PLANE"
2244 msgstr "Working Plane"
2246 msgid "STB_WORK_PLANE"
2247 msgstr "Create a working plane"
2249 msgid "TOP_LOCAL_CS"
2250 msgstr "Create a local coordinate system"
2252 msgid "MEN_LOCAL_CS"
2253 msgstr "Local Coordinate System"
2255 msgid "STB_LOCAL_CS"
2256 msgstr "Create a local coordinate system"
2258 msgid "MEN_PRIMITIVES"
2262 msgstr "Create a box"
2268 msgstr "Create a box"
2270 msgid "TOP_CYLINDER"
2271 msgstr "Create a cylinder"
2273 msgid "MEN_CYLINDER"
2276 msgid "STB_CYLINDER"
2277 msgstr "Create a cylinder"
2280 msgstr "Create a sphere"
2286 msgstr "Create a sphere"
2289 msgstr "Create a torus"
2295 msgstr "Create a torus"
2298 msgstr "Create a cone"
2304 msgstr "Create a cone"
2306 msgid "MEN_GENERATION"
2309 msgid "TOP_EXTRUSION"
2310 msgstr "Create an extrusion"
2312 msgid "MEN_EXTRUSION"
2315 msgid "STB_EXTRUSION"
2316 msgstr "Create an extrusion"
2318 msgid "TOP_REVOLUTION"
2319 msgstr "Create a revolution"
2321 msgid "MEN_REVOLUTION"
2324 msgid "STB_REVOLUTION"
2325 msgstr "Create a revolution"
2328 msgstr "Create a filling"
2334 msgstr "Create a filling"
2337 msgstr "Extrusion along a path"
2340 msgstr "Extrusion Along a Path"
2343 msgstr "Create a shape by Extrusion along a path"
2348 msgid "TOP_GROUP_CREATE"
2349 msgstr "Create a group"
2351 msgid "MEN_GROUP_CREATE"
2354 msgid "STB_GROUP_CREATE"
2355 msgstr "Create a group"
2357 msgid "TOP_GROUP_EDIT"
2358 msgstr "Edit a group"
2360 msgid "MEN_GROUP_EDIT"
2363 msgid "STB_GROUP_EDIT"
2364 msgstr "Edit a group"
2370 msgstr "Quadrangle Face"
2373 msgstr "Quadrangle Face"
2376 msgstr "Quadrangle Face"
2378 msgid "TOP_HEX_SOLID"
2379 msgstr "Hexahedral Solid"
2381 msgid "MEN_HEX_SOLID"
2382 msgstr "Hexahedral Solid"
2384 msgid "STB_HEX_SOLID"
2385 msgstr "Hexahedral Solid"
2409 msgstr "Build an edge"
2415 msgstr "Build an edge"
2418 msgstr "Build a wire"
2424 msgstr "Build a wire"
2427 msgstr "Build a face"
2433 msgstr "Build a face from wires and/or edges"
2436 msgstr "Build a shell"
2442 msgstr "Build a shell"
2445 msgstr "Build a solid"
2451 msgstr "Build a solid"
2453 msgid "TOP_COMPOUND"
2454 msgstr "Build a compound"
2456 msgid "MEN_COMPOUND"
2459 msgid "STB_COMPOUND"
2460 msgstr "Build a compound"
2462 msgid "MEN_OPERATIONS"
2504 msgid "MEN_TRANSFORMATION"
2505 msgstr "Transformation"
2507 msgid "TOP_TRANSLATION"
2508 msgstr "Translation"
2510 msgid "MEN_TRANSLATION"
2511 msgstr "Translation"
2513 msgid "STB_TRANSLATION"
2514 msgstr "Translation"
2516 msgid "TOP_ROTATION"
2519 msgid "MEN_ROTATION"
2522 msgid "STB_ROTATION"
2525 msgid "TOP_MODIFY_LOCATION"
2526 msgstr "Modify the Location"
2528 msgid "MEN_MODIFY_LOCATION"
2529 msgstr "Modify the Location"
2531 msgid "STB_MODIFY_LOCATION"
2532 msgstr "Modify the Location"
2535 msgstr "Mirror image"
2538 msgstr "Mirror Image"
2541 msgstr "Mirror image"
2544 msgstr "Scale transform"
2547 msgstr "Scale Transform"
2550 msgstr "Scale transform"
2553 msgstr "Offset surface"
2556 msgstr "Offset Surface"
2559 msgstr "Offset surface"
2561 msgid "TOP_MUL_TRANSLATION"
2562 msgstr "Multi-Translation"
2564 msgid "MEN_MUL_TRANSLATION"
2565 msgstr "Multi-Translation"
2567 msgid "STB_MUL_TRANSLATION"
2568 msgstr "Multi-Translation"
2570 msgid "TOP_MUL_ROTATION"
2571 msgstr "Multi-Rotation"
2573 msgid "MEN_MUL_ROTATION"
2574 msgstr "Multi-Rotation"
2576 msgid "STB_MUL_ROTATION"
2577 msgstr "Multi-Rotation"
2579 msgid "TOP_PARTITION"
2582 msgid "MEN_PARTITION"
2585 msgid "STB_PARTITION"
2588 msgid "TOP_ARCHIMEDE"
2591 msgid "MEN_ARCHIMEDE"
2594 msgid "STB_ARCHIMEDE"
2615 msgid "TOP_CLIPPING"
2616 msgstr "Clipping range"
2618 msgid "MEN_CLIPPING"
2619 msgstr "Clipping Range"
2621 msgid "STB_CLIPPING"
2622 msgstr "Clipping range"
2624 msgid "TOP_MUL_TRANSFORM"
2625 msgstr "Multi-transformation"
2627 msgid "MEN_MUL_TRANSFORM"
2628 msgstr "Multi-Transformation"
2630 msgid "STB_MUL_TRANSFORM"
2631 msgstr "Multi-transformation"
2633 msgid "TOP_EXPLODE_BLOCKS"
2634 msgstr "Explode on Blocks"
2636 msgid "MEN_EXPLODE_BLOCKS"
2637 msgstr "Explode on Blocks"
2639 msgid "STB_EXPLODE_BLOCKS"
2640 msgstr "Explode on Blocks"
2642 msgid "TOP_PROPAGATE"
2645 msgid "MEN_PROPAGATE"
2648 msgid "STB_PROPAGATE"
2654 msgid "TOP_SHAPE_PROCESS"
2655 msgstr "Perform shape processing"
2657 msgid "MEN_SHAPE_PROCESS"
2658 msgstr "Shape Processing"
2660 msgid "STB_SHAPE_PROCESS"
2661 msgstr "Perform shape processing "
2663 msgid "TOP_SUPPRESS_FACES"
2664 msgstr "Perform suppress faces"
2666 msgid "MEN_SUPPRESS_FACES"
2667 msgstr "Suppress Faces"
2669 msgid "STB_SUPPRESS_FACES"
2670 msgstr "Perform suppress faces"
2672 msgid "TOP_CLOSE_CONTOUR"
2673 msgstr "Perform close contour"
2675 msgid "MEN_CLOSE_CONTOUR"
2676 msgstr "Close Contour"
2678 msgid "STB_CLOSE_CONTOUR"
2679 msgstr "Perform close contour"
2681 msgid "TOP_SUPPRESS_INT_WIRES"
2682 msgstr "Perform suppress internal wires"
2684 msgid "MEN_SUPPRESS_INT_WIRES"
2685 msgstr "Suppress Internal Wires"
2687 msgid "STB_SUPPRESS_INT_WIRES"
2688 msgstr "Perform suppress internal wires"
2690 msgid "TOP_SUPPERSS_HOLES"
2691 msgstr "Perform suppress holes"
2693 msgid "MEN_SUPPERSS_HOLES"
2694 msgstr "Suppress Holes"
2696 msgid "STB_SUPPERSS_HOLES"
2697 msgstr "Perform suppress holes"
2700 msgstr "Perform sewing"
2706 msgstr "Perform sewing"
2708 msgid "TOP_GLUE_FACES"
2709 msgstr "Perform glue faces"
2711 msgid "MEN_GLUE_FACES"
2714 msgid "STB_GLUE_FACES"
2715 msgstr "Perform glue faces"
2717 msgid "TOP_POINT_ON_EDGE"
2718 msgstr "Add point on edge"
2720 msgid "MEN_POINT_ON_EDGE"
2721 msgstr "Add Point on Edge"
2723 msgid "STB_POINT_ON_EDGE"
2724 msgstr "Add point on edge"
2726 msgid "TOP_CHECK_FREE_BNDS"
2727 msgstr "Check free boundaries"
2729 msgid "MEN_CHECK_FREE_BNDS"
2730 msgstr "Check Free Boundaries"
2732 msgid "STB_CHECK_FREE_BNDS"
2733 msgstr "Check free boundaries"
2735 msgid "TOP_CHECK_FREE_FACES"
2736 msgstr "Check free faces"
2738 msgid "MEN_CHECK_FREE_FACES"
2739 msgstr "Check Free Faces"
2741 msgid "STB_CHECK_FREE_FACES"
2742 msgstr "Check free faces"
2744 msgid "TOP_CHANGE_ORIENTATION"
2745 msgstr "Change orientation"
2747 msgid "MEN_CHANGE_ORIENTATION"
2748 msgstr "Change Orientation"
2750 msgid "STB_CHANGE_ORIENTATION"
2751 msgstr "Change orientation"
2753 msgid "TOP_REMOVE_EXTRA_EDGES"
2754 msgstr "Remove extra edges"
2756 msgid "MEN_REMOVE_EXTRA_EDGES"
2757 msgstr "Remove Extra Edges"
2759 msgid "STB_REMOVE_EXTRA_EDGES"
2760 msgstr "Remove extra edges"
2762 msgid "MEN_MEASURES"
2765 msgid "TOP_POINT_COORDS"
2766 msgstr "Point coordinates"
2768 msgid "MEN_POINT_COORDS"
2769 msgstr "Point Coordinates"
2771 msgid "STB_POINT_COORDS"
2772 msgstr "Point coordinates"
2774 msgid "TOP_BASIC_PROPS"
2775 msgstr "Basic properties"
2777 msgid "MEN_BASIC_PROPS"
2778 msgstr "Basic Properties"
2780 msgid "STB_BASIC_PROPS"
2781 msgstr "Basic properties"
2783 msgid "TOP_MASS_CENTER"
2784 msgstr "Compute center of mass"
2786 msgid "MEN_MASS_CENTER"
2787 msgstr "Center of Mass"
2789 msgid "STB_MASS_CENTER"
2790 msgstr "Compute center of mass"
2793 msgstr "Compute normal to a face"
2796 msgstr "Normal to a Face"
2799 msgstr "Compute normal to a face in a point (optional)"
2802 msgstr "Compute intertia"
2808 msgstr "Compute intertia"
2810 msgid "MEN_DIMENSIONS"
2814 msgstr "Compute bounding box"
2817 msgstr "Bounding Box"
2820 msgstr "Compute bounding box"
2822 msgid "TOP_MIN_DIST"
2823 msgstr "Compute minimum distance"
2825 msgid "MEN_MIN_DIST"
2826 msgstr "Min Distance"
2828 msgid "STB_MIN_DIST"
2829 msgstr "Compute minimum distance"
2831 msgid "TOP_MEASURE_ANGLE"
2832 msgstr "Compute angle"
2834 msgid "MEN_MEASURE_ANGLE"
2837 msgid "STB_MEASURE_ANGLE"
2838 msgstr "Compute angle between two lines or linear edges"
2840 msgid "TOP_TOLERANCE"
2841 msgstr "Compute tolerance"
2843 msgid "MEN_TOLERANCE"
2844 msgstr "Compute Tolerance"
2846 msgid "STB_TOLERANCE"
2847 msgstr "Compute tolerance"
2867 msgid "TOP_CHECK_COMPOUND"
2868 msgstr "Check compound of blocks"
2870 msgid "MEN_CHECK_COMPOUND"
2871 msgstr "Check Compound of Blocks"
2873 msgid "STB_CHECK_COMPOUND"
2874 msgstr "Check compound of blocks"
2879 msgid "TOP_CHECK_GEOMETRY"
2880 msgstr "Check Geometry"
2882 msgid "MEN_CHECK_GEOMETRY"
2883 msgstr "Check Geometry"
2885 msgid "STB_CHECK_GEOMETRY"
2886 msgstr "Check Geometry"
2888 msgid "MEN_PREFERENCES"
2889 msgstr "Preferences"
2891 msgid "MEN_PREFERENCES_GEOM"
2894 msgid "TOP_SHADING_COLOR"
2895 msgstr "Set shading color"
2897 msgid "MEN_SHADING_COLOR"
2898 msgstr "Shading Color"
2900 msgid "STB_SHADING_COLOR"
2901 msgstr "Set shading color"
2904 msgstr "Set number of isolines"
2910 msgstr "Set number of isolines"
2912 msgid "TOP_STEP_VALUE"
2913 msgstr "Set step value"
2915 msgid "MEN_STEP_VALUE"
2918 msgid "STB_STEP_VALUE"
2919 msgstr "Set step value"
2924 msgid "MEN_DISPLAY_MODE"
2925 msgstr "Display Mode"
2933 msgid "MEN_WIREFRAME"
2939 msgid "TOP_DISPLAY_ALL"
2942 msgid "MEN_DISPLAY_ALL"
2945 msgid "STB_DISPLAY_ALL"
2948 msgid "TOP_ERASE_ALL"
2951 msgid "MEN_ERASE_ALL"
2954 msgid "STB_ERASE_ALL"
2964 msgstr "Show object(s)"
2966 msgid "TOP_DISPLAY_ONLY"
2969 msgid "MEN_DISPLAY_ONLY"
2972 msgid "STB_DISPLAY_ONLY"
2982 msgstr "Hide object(s)"
2984 msgid "TOP_POP_RENAME"
2987 msgid "MEN_POP_RENAME"
2990 msgid "STB_POP_RENAME"
2993 msgid "TOP_POP_WIREFRAME"
2996 msgid "MEN_POP_WIREFRAME"
2999 msgid "STB_POP_WIREFRAME"
3002 msgid "TOP_POP_SHADING"
3005 msgid "MEN_POP_SHADING"
3008 msgid "STB_POP_SHADING"
3011 msgid "TOP_POP_AUTO_COLOR"
3014 msgid "MEN_POP_AUTO_COLOR"
3017 msgid "STB_POP_AUTO_COLOR"
3020 msgid "TOP_POP_DISABLE_AUTO_COLOR"
3021 msgstr "Disable auto color"
3023 msgid "MEN_POP_DISABLE_AUTO_COLOR"
3024 msgstr "Disable Auto Color"
3026 msgid "STB_POP_DISABLE_AUTO_COLOR"
3027 msgstr "Disable auto color"
3029 msgid "TOP_POP_COLOR"
3032 msgid "MEN_POP_COLOR"
3035 msgid "STB_POP_COLOR"
3038 msgid "TOP_POP_TRANSPARENCY"
3039 msgstr "Transparency"
3041 msgid "MEN_POP_TRANSPARENCY"
3042 msgstr "Transparency"
3044 msgid "STB_POP_TRANSPARENCY"
3045 msgstr "Transparency"
3047 msgid "TOP_POP_ISOS"
3050 msgid "MEN_POP_ISOS"
3053 msgid "STB_POP_ISOS"
3056 msgid "TOP_POP_CREATE_GROUP"
3057 msgstr "Create Group"
3059 msgid "MEN_POP_CREATE_GROUP"
3060 msgstr "Create Group"
3062 msgid "STB_POP_CREATE_GROUP"
3063 msgstr "Create Group"
3068 msgid "TOOL_PRIMITIVES"
3071 msgid "TOOL_BOOLEAN"
3072 msgstr "Boolean Operations"
3074 msgid "TOOL_GENERATION"
3077 msgid "TOOL_TRANSFORMATION"
3078 msgstr "Transformation"
3086 msgid "GEOM_RESULT_NAME_GRP"
3087 msgstr "Result name"
3089 msgid "GEOM_RESULT_NAME_LBL"
3092 msgid "GEOM_ERR_GET_ENGINE"
3093 msgstr "Failed to obtain GEOM Engine component. Reload Geometry module and try again."
3095 msgid "PREF_GROUP_OCCVIEWER"
3096 msgstr "OCC Viewer 3d"
3098 msgid "PREF_GROUP_GENERAL"
3101 msgid "PREF_GROUP_VERTEX"
3102 msgstr "Marker of Points"
3104 msgid "PREF_SHADING_COLOR"
3105 msgstr "Default shading color"
3107 msgid "PREF_WIREFRAME_COLOR"
3108 msgstr "Default wireframe color"
3110 msgid "PREF_FREE_BOUND_COLOR"
3111 msgstr "Color of free boundaries"
3113 msgid "PREF_LINE_COLOR"
3114 msgstr "Color of edges, vectors, wires"
3116 msgid "PREF_POINT_COLOR"
3117 msgstr "Color of points"
3119 msgid "PREF_ISOS_COLOR"
3120 msgstr "Color of isolines"
3122 msgid "PREF_STEP_VALUE"
3123 msgstr "Step value for spin boxes"
3125 msgid "PREF_DISPLAY_MODE"
3126 msgstr "Default display mode"
3128 msgid "PREF_TAB_SETTINGS"
3131 msgid "PREF_TYPE_OF_MARKER"
3134 msgid "PREF_MARKER_SCALE"
3164 msgid "ERROR_SHAPE_TYPE"
3165 msgstr "Object of incorrect type selected!\nPlease, select face, shell or solid and try again"
3168 msgstr "Selected object has been used to create another one\n It can't be deleted "
3170 msgid "MEN_SELECT_ONLY"
3171 msgstr "Select Only"
3173 msgid "STB_VERTEX_SEL_ONLY"
3174 msgstr "Select only a Points"
3176 msgid "STB_EDGE_SEL_ONLY"
3177 msgstr "Select only a Edges"
3179 msgid "STB_WIRE_SEL_ONLY"
3180 msgstr "Select only a Wires"
3182 msgid "STB_FACE_SEL_ONLY"
3183 msgstr "Select only a Faces"
3185 msgid "STB_SHELL_SEL_ONLY"
3186 msgstr "Select only a Shells"
3188 msgid "STB_SOLID_SEL_ONLY"
3189 msgstr "Select only a Solids"
3191 msgid "STB_COMPOUND_SEL_ONLY"
3192 msgstr "Select only a Compounds"
3194 msgid "STB_ALL_SEL_ONLY"
3195 msgstr "Select all Objects"
3197 msgid "MEN_VERTEX_SEL_ONLY"
3200 msgid "MEN_EDGE_SEL_ONLY"
3203 msgid "MEN_WIRE_SEL_ONLY"
3206 msgid "MEN_FACE_SEL_ONLY"
3209 msgid "MEN_SHELL_SEL_ONLY"
3212 msgid "MEN_SOLID_SEL_ONLY"
3215 msgid "MEN_COMPOUND_SEL_ONLY"
3218 msgid "MEN_ALL_SEL_ONLY"