1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: 2003-10-27 17:32+0100\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
65 msgid "GEOM_BUT_EXPLODE"
69 #==============================================================================
72 #: GeometryGUI.cxx:563
73 msgid "GEOM_INF_LOADED"
74 msgstr "File %1 loaded."
77 #==============================================================================
80 #: GeometryGUI.cxx:3069
81 msgid "GEOM_PRP_COMMAND"
82 msgstr "No command associated with this id = %1."
84 #: GeometryGUI.cxx:4977
85 msgid "GEOM_PRP_ABORT"
86 msgstr "Operation aborted"
88 #: GeometryGUI.cxx:5058
90 msgstr "Operation done"
92 #: GeometryGUI.cxx:3717
93 msgid "GEOM_PRP_LOADING"
94 msgstr "Loading %1 ..."
96 #: GeometryGUI.cxx:1412
97 msgid "GEOM_PRP_NULLSHAPE"
98 msgstr "Error, null or inappropriate shape !"
100 #: GeometryGUI.cxx:5072
101 msgid "GEOM_PRP_READY"
104 #: GeometryGUI.cxx:1690
105 msgid "GEOM_PRP_SELECT_SUBSHAPES"
106 msgstr "Select Sub Shapes"
108 msgid "GEOM_PRP_EXPORT"
109 msgstr "Exporting geometry to %1 ..."
112 msgstr "Confirm operation"
114 msgid "GEOM_CONFIRM_INFO"
115 msgstr "Shape contains %1 sub shapes !"
118 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
119 msgstr "Not allowed in VTK viewer"
121 #: GeometryGUI.cxx:1690
122 msgid "GEOM_PRP_SHAPE_IN_STUDY"
123 msgstr "Main shape must be in the study before"
125 #: GeometryGUI.cxx:1690
126 msgid "GEOM_PRP_SELECT_EDGE"
127 msgstr "Select edges and click on Apply"
129 #: GeometryGUI.cxx:1690
130 msgid "GEOM_PRP_SELECT_FACE"
131 msgstr "Select faces to suppress and click on Ok/Apply"
133 #: GeometryGUI.cxx:1690
134 msgid "GEOM_PRP_SELECT_FIRST"
135 msgstr "Select main shape first"
137 #: GeometryGUI.cxx:1690
138 msgid "GEOM_PRP_MIN_DIST"
139 msgstr "Min Distance not computed"
141 msgid "GEOM_STUDY_LOCKED"
142 msgstr "The active study is locked and therefore cannot be modified"
145 #==============================================================================
148 #: GeometryGUI.cxx:3698
149 msgid "GEOM_MEN_ALL_FILES"
150 msgstr "All Files ( * )"
152 #: GeometryGUI.cxx:4389
153 msgid "GEOM_MEN_ANGLE"
156 #: GeometryGUI.cxx:3941
157 msgid "GEOM_MEN_COMPONENT"
160 #: GeometryGUI.cxx:4389
161 msgid "GEOM_MEN_ENTER_ANGLE"
162 msgstr "Enter An Angle In Degrees"
164 #: GeometryGUI.cxx:3758
165 msgid "GEOM_MEN_EXPORT"
168 #: GeometryGUI.cxx:3648
169 msgid "GEOM_MEN_IMPORT"
172 #: GeometryGUI.cxx:2931
173 msgid "GEOM_MEN_ISOS"
174 msgstr "Select Number Of Isos"
176 #: GeometryGUI.cxx:4278
177 msgid "GEOM_MEN_POPUP_NAME"
180 #: GeometryGUI.cxx:4414
181 msgid "GEOM_MEN_SKETCHER_X"
182 msgstr "Enter a length to set X"
184 #: GeometryGUI.cxx:4438
185 msgid "GEOM_MEN_SKETCHER_Y"
186 msgstr "Enter a length to set Y"
188 #: GeometryGUI.cxx:2898
189 msgid "GEOM_MEN_TRANSPARENCY"
190 msgstr "Transparency"
192 #: GeometryGUI.cxx:4413
196 #: GeometryGUI.cxx:4437
200 #: GeometryGUI_NbIsosDlg.cxx:36
201 msgid "GEOM_MEN_ISOU"
204 #: GeometryGUI_NbIsosDlg.cxx:53
205 msgid "GEOM_MEN_ISOV"
208 #: GeometryGUI_TransparencyDlg.cxx:31
209 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
210 msgstr "Transparency :"
212 msgid "GEOM_MEN_STEP_LABEL"
215 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
216 msgstr "Identical names : select by mouse !"
218 msgid "GEOM_NAME_INCORRECT"
219 msgstr "Object name not found"
221 msgid "GEOM_INCORRECT_INPUT"
222 msgstr "Incorrect input data!"
225 #==============================================================================
228 #: GeometryGUI.cxx:892
229 msgid "GEOM_WRN_RADIUS_NULL"
230 msgstr "Radius is null"
232 #: GeometryGUI.cxx:3854
233 msgid "GEOM_WRN_WARNING"
236 #: GeometryGUI.cxx:3854
237 msgid "GEOM_REALLY_DELETE"
238 msgstr "Do you really want to delete object(s) ?"
241 #==============================================================================
249 msgid "GEOM_MAIN_OBJECT"
253 msgid "GEOM_TOOL_OBJECT"
257 msgid "GEOM_BASE_OBJECT"
261 msgid "GEOM_PATH_OBJECT"
269 msgid "GEOM_OBJECT_I"
273 msgid "GEOM_OBJECT_RESULT"
274 msgstr "Object And Result"
281 msgid "GEOM_BASE_POINT"
285 msgid "GEOM_CENTER_POINT"
286 msgstr "Center Point"
289 msgid "GEOM_DIAGONAL_POINTS"
290 msgstr "Diagonal Points"
293 msgid "GEOM_CENTRAL_POINT"
294 msgstr "Central Point"
305 msgid "GEOM_ARGUMENTS"
317 msgid "GEOM_RADIUS_I"
333 msgid "GEOM_COORDINATES"
345 msgid "GEOM_REVERSE_U"
349 msgid "GEOM_REVERSE_V"
365 msgid "GEOM_VECTOR_LENGTH"
366 msgstr "Vector Length :"
369 msgid "GEOM_REVERSE_VECTOR"
370 msgstr "Reverse Vector"
373 msgid "GEOM_POINT_MIRROR"
374 msgstr "Point Mirror"
377 msgid "GEOM_AXE_MIRROR"
381 msgid "GEOM_PLANE_MIRROR"
382 msgstr "Plane Mirror"
385 msgid "GEOM_FACE_SELECTION"
386 msgstr "Face Selection"
393 msgid "GEOM_WATER_DENSITY"
394 msgstr "Water Density :"
397 msgid "GEOM_MESHING_DEFLECTION"
398 msgstr "Meshing Deflect. :"
401 msgid "GEOM_DIMENSIONS"
405 msgid "GEOM_PRECISION"
409 msgid "GEOM_SELECTION"
413 msgid "GEOM_NB_TIMES"
417 msgid "GEOM_NB_TIMES_U"
418 msgstr "Nb. Times U :"
421 msgid "GEOM_NB_TIMES_V"
422 msgstr "Nb. Times V :"
437 #==============================================================================
441 msgid "GEOM_PARTITION"
444 #Half-space partition
445 msgid "GEOM_PARTITION_HALFSPACE"
446 msgstr "Half-space partition"
449 msgid "GEOM_TOLERANCE"
453 msgid "GEOM_ORIENTATION"
461 msgid "GEOM_REVOLUTION"
465 msgid "GEOM_ROTATION"
469 msgid "GEOM_ARCHIMEDE"
481 msgid "GEOM_DISTANCE"
497 msgid "GEOM_POSITION"
513 msgid "GEOM_TRANSLATION"
518 msgstr "Working Plane"
525 msgid "GEOM_EXTRUSION"
529 msgid "GEOM_SUB_SHAPE"
533 msgid "GEOM_SUPRESSFACE"
534 msgstr "Supress Face"
545 msgid "GEOM_CHECK_SHAPE"
548 #Check Blocks Compound
549 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
550 msgstr "Check and Improve Blocks Compound"
552 #Check Blocks Compound Errors
553 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
556 #Check Blocks Compound Errors
557 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
558 msgstr "The Compound of Blocks has no errors"
560 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
561 msgstr "The Compound of Blocks has errors"
563 #Check Blocks Compound SubShapes
564 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
565 msgstr "Incriminated Sub-Shapes"
573 msgstr "Bounding Box"
577 msgstr "Center Of Mass"
580 msgid "GEOM_PROPERTIES"
581 msgstr "Basic Properties"
584 msgid "GEOM_MULTITRANSLATION"
585 msgstr "Multi-Translation"
588 msgid "GEOM_MULTIROTATION"
589 msgstr "Multi-Rotation"
592 #==============================================================================
611 msgid "GEOM_ELLIPSE_TITLE"
612 msgstr "Ellipse Construction"
615 msgid "GEOM_RADIUS_MAJOR"
616 msgstr "Major radius :"
619 msgid "GEOM_RADIUS_MINOR"
620 msgstr "Minor radius :"
623 msgid "GEOM_COMPOUND"
627 msgid "GEOM_BLOCKS_COMPOUND"
628 msgstr "BlocksCompound"
631 msgid "GEOM_COMPOUNDSOLID"
639 msgid "GEOM_CYLINDER"
655 msgid "GEOM_FACE_OR_LCS"
687 msgid "GEOM_SURFCONE"
688 msgstr "Conical Face"
691 msgid "GEOM_SURFCYLINDER"
692 msgstr "Cylindrical Face"
695 msgid "GEOM_SURFSPHERE"
696 msgstr "Spherical Face"
699 msgid "GEOM_SURFTORUS"
700 msgstr "Toroidal Face"
711 msgid "GEOM_VECTOR_U"
715 msgid "GEOM_VECTOR_V"
735 msgstr "Imported_Shape"
738 msgid "GEOM_PARAMETER"
742 #==============================================================================
786 #==============================================================================
790 msgid "GEOM_STEP_TITLE"
791 msgstr "Step value for GUI constructions"
793 #: GeometryGUI_ArcDlg.cxx:45
794 msgid "GEOM_ARC_TITLE"
795 msgstr "Arc Construction"
797 #: GeometryGUI_ArchimedeDlg.cxx:55
798 msgid "GEOM_ARCHIMEDE_TITLE"
799 msgstr "Archimede Construction"
801 #: GeometryGUI_BndBoxDlg.cxx:59
802 msgid "GEOM_BNDBOX_TITLE"
803 msgstr "Bounding Box Informations"
805 #: GeometryGUI_BndBoxDlg.cxx:82
806 msgid "GEOM_BNDBOX_OBJDIM"
807 msgstr "Object And Its Dimensions"
809 #: GeometryGUI_BoxDlg.cxx:50
810 msgid "GEOM_BOX_TITLE"
811 msgstr "Box Construction"
813 #: GeometryGUI_BoxDlg.cxx:50
815 msgstr "Dimensions At Origin"
817 #: GeometryGUI_ChamferDlg.cxx:58
818 msgid "GEOM_CHAMFER_TITLE"
819 msgstr "Chamfer Construction"
821 #: GeometryGUI_ChamferDlg.cxx:58
822 msgid "GEOM_CHAMFER_ALL"
823 msgstr "Chamfer On Whole Shape"
825 #: GeometryGUI_ChamferDlg.cxx:58
826 msgid "GEOM_CHAMFER_EDGES"
827 msgstr "Chamfer On Edges From Shape"
829 #: GeometryGUI_ChamferDlg.cxx:58
830 msgid "GEOM_CHAMFER_FACES"
831 msgstr "Chamfer On Faces From Shape"
833 #: GeometryGUI_CircleDlg.cxx:48
834 msgid "GEOM_CIRCLE_TITLE"
835 msgstr "Circle Construction"
837 #: GeometryGUI_CenterMassDlg.cxx:77
838 msgid "GEOM_CMASS_TITLE"
839 msgstr "Center Of Mass Construction"
841 msgid "GEOM_PLANE_SIZE"
842 msgstr "Size of plane :"
844 #: GeometryGUI_CommonDlg.cxx:47
845 msgid "GEOM_COMMON_TITLE"
846 msgstr "BOOLEAN : Common Of Two Objects"
848 #: GeometryGUI_CompoundDlg.cxx:44
849 msgid "GEOM_COMPOUND_TITLE"
850 msgstr "Create A Compound"
852 #: GeometryGUI_ConeDlg.cxx:49
853 msgid "GEOM_CONE_TITLE"
854 msgstr "Cone Construction"
856 #: GeometryGUI_CutDlg.cxx:48
857 msgid "GEOM_CUT_TITLE"
858 msgstr "BOOLEAN : Cut Of Two Objects"
860 #: GeometryGUI_CylinderDlg.cxx:47
861 msgid "GEOM_CYLINDER_TITLE"
862 msgstr "Cylinder Construction"
864 #: GeometryGUI_CheckShape.cxx:60
865 msgid "GEOM_CHECK_TITLE"
866 msgstr "Check Shape Informations"
868 #: GeometryGUI_CheckShape.cxx:83
869 msgid "GEOM_CHECK_INFOS"
870 msgstr "Object And Its Topological Informations"
872 #: GeometryGUI_DistanceDlg.cxx:57
873 msgid "GEOM_MINDIST_TITLE"
874 msgstr "Minimun Distance Between Two Objects"
876 #: GeometryGUI_DistanceDlg.cxx:57
877 msgid "GEOM_MINDIST_OBJ"
878 msgstr "Objects And Results"
880 #: GeometryGUI_AngleDlg.cxx:82
881 msgid "GEOM_MEASURE_ANGLE_TITLE"
882 msgstr "Angle Between Two Objects"
884 #: GeometryGUI_AngleDlg.cxx:86
885 msgid "GEOM_MEASURE_ANGLE_ANGLE"
888 #: GeometryGUI_AngleDlg.cxx:90
889 msgid "GEOM_MEASURE_ANGLE_OBJ"
890 msgstr "Objects And Results"
892 #: GeometryGUI_AngleDlg.cxx:93
893 msgid "GEOM_MEASURE_ANGLE_IS"
896 #: GeometryGUI_EdgeDlg.cxx:47
897 msgid "GEOM_EDGE_TITLE"
898 msgstr "Create An Edge"
900 #: GeometryGUI_FilletDlg.cxx:58
901 msgid "GEOM_FILLET_TITLE"
902 msgstr "Fillet Construction"
904 #: GeometryGUI_FilletDlg.cxx:58
905 msgid "GEOM_FILLET_ALL"
906 msgstr "Fillet On Whole Shape"
908 #: GeometryGUI_FilletDlg.cxx:58
909 msgid "GEOM_FILLET_EDGES"
910 msgstr "Fillet On Edges From Shape"
912 #: GeometryGUI_FilletDlg.cxx:58
913 msgid "GEOM_FILLET_FACES"
914 msgstr "Fillet On Faces From Shape"
916 #: GeometryGUI_FaceDlg.cxx:49
917 msgid "GEOM_FACE_TITLE"
918 msgstr "Create A Face"
920 #: GeometryGUI_FaceDlg.cxx:78
921 msgid "GEOM_FACE_FFW"
922 msgstr "Face from a closed wire and edge"
924 #: GeometryGUI_FaceDlg.cxx:103
925 msgid "GEOM_FACE_OPT"
926 msgstr "Try to create a planar face"
928 #: GeometryGUI_FillingDlg.cxx:53
929 msgid "GEOM_FILLING_TITLE"
930 msgstr "Filling Surface With Edges"
932 #: GeometryGUI_FillingDlg.cxx:112
933 msgid "GEOM_FILLING_ARG"
934 msgstr "Arguments And Parameters"
936 #: GeometryGUI_FillingDlg.cxx:128
937 msgid "GEOM_FILLING_MIN_DEG"
940 #: GeometryGUI_FillingDlg.cxx:142
941 msgid "GEOM_FILLING_MAX_DEG"
944 #: GeometryGUI_FillingDlg.cxx:150
945 msgid "GEOM_FILLING_TOL_2D"
948 #: GeometryGUI_FillingDlg.cxx:170
949 msgid "GEOM_FILLING_COMPOUND"
950 msgstr "Edges compound"
952 #: GeometryGUI_FillingDlg.cxx:184
953 msgid "GEOM_FILLING_TOL_3D"
956 #: GeometryGUI_FillingDlg.cxx:192
957 msgid "GEOM_FILLING_NB_ITER"
960 #: GeometryGUI_FuseDlg.cxx:48
961 msgid "GEOM_FUSE_TITLE"
962 msgstr "BOOLEAN : Fuse Two Objects"
964 #: GeometryGUI_InertiaDlg.cxx:42
965 msgid "GEOM_INERTIA_TITLE"
966 msgstr "Calculs Of Inertia"
968 #: GeometryGUI_InertiaDlg.cxx:50
969 msgid "GEOM_INERTIA_CONSTR"
970 msgstr "Matrix And Moments Of Inertia"
972 #: GeometryGUI_InertiaDlg.cxx:100
973 msgid "GEOM_INERTIA_I"
976 #: GeometryGUI_InertiaDlg.cxx:182
977 msgid "GEOM_INERTIA_IXYZ"
978 msgstr "IX & IY & IZ :"
980 #: GeometryGUI_LineDlg.cxx:50
981 msgid "GEOM_LINE_TITLE"
982 msgstr "Line Construction"
984 #: GeometryGUI_MaxToleranceDlg.cxx:53
985 msgid "GEOM_TOLERANCE_TITLE"
986 msgstr "Maximum Tolerance"
988 #: GeometryGUI_MaxToleranceDlg.cxx:84
989 msgid "GEOM_TOLERANCE_CONSTR"
990 msgstr "Object And Its Tolerances"
992 #: GeometryGUI_MaxToleranceDlg.cxx:121
993 msgid "GEOM_TOLERANCE_FACE"
996 #: GeometryGUI_MaxToleranceDlg.cxx:138
997 msgid "GEOM_TOLERANCE_EDGE"
1000 #: GeometryGUI_MaxToleranceDlg.cxx:155
1001 msgid "GEOM_TOLERANCE_VERTEX"
1004 #: GeometryGUI_MirrorDlg.cxx:52
1005 msgid "GEOM_MIRROR_TITLE"
1006 msgstr "Mirror An Object"
1008 #: GeometryGUI_OrientationDlg.cxx:46
1009 msgid "GEOM_ORIENTATION_TITLE"
1010 msgstr "Change Orientation"
1012 #: GeometryGUI_OrientationDlg.cxx:134
1013 msgid "GEOM_ORIENTATION_OPT"
1014 msgstr "Reverse orientation with normal vectors simulation"
1016 #: GeometryGUI_PartitionDlg.cxx:45
1017 msgid "GEOM_PARTITION_TITLE"
1018 msgstr "Partition Of Object With Tool"
1020 #: GeometryGUI_PartitionDlg.cxx:45
1021 msgid "GEOM_KEEP_OBJECT"
1022 msgstr "Keep Object"
1024 #: GeometryGUI_PartitionDlg.cxx:45
1025 msgid "GEOM_PARTITION_ORIENTATION"
1026 msgstr "Change Orientation"
1028 #: GeometryGUI_PartitionDlg.cxx:45
1029 msgid "SUPPRESS_RESULT"
1030 msgstr "Suppress Result"
1032 msgid "GEOM_REMOVE_WEBS"
1033 msgstr "Remove webs"
1035 msgid "GEOM_SET_MATERIALS"
1036 msgstr "Set materials"
1038 #: OperationGUI_MaterialDlg.cxx:45
1039 msgid "GEOM_MATERIAL_TITLE"
1040 msgstr "Define materials for Dominant Fuse"
1042 msgid "GEOM_MATERIAL_SHAPE"
1045 msgid "GEOM_MATERIAL_MATERIAL"
1048 msgid "GEOM_MATERIAL_ID"
1049 msgstr "Material ID:"
1051 msgid "GEOM_MATERIAL_SET"
1054 #: GeometryGUI_PipeDlg.cxx:47
1055 msgid "GEOM_PIPE_TITLE"
1056 msgstr "Pipe Construction"
1058 #: GeometryGUI_PointDlg.cxx:52
1059 msgid "GEOM_POINT_TITLE"
1060 msgstr "Point Construction"
1062 #: GeometryGUI_PlaneDlg.cxx:60
1063 msgid "GEOM_PLANE_TITLE"
1064 msgstr "Plane Construction"
1066 #: GeometryGUI_PlaneDlg.cxx:172
1067 msgid "GEOM_PLANE_PVC"
1068 msgstr "Point + Coordinate Vector"
1070 #: GeometryGUI_PlaneDlg.cxx:133
1071 msgid "GEOM_PLANE_PV"
1072 msgstr "Point + Vector"
1074 #: GeometryGUI_PrismDlg.cxx:54
1075 msgid "GEOM_EXTRUSION_TITLE"
1076 msgstr "Construction by Extrusion"
1078 #: GeometryGUI_PrismDlg.cxx:83
1079 msgid "GEOM_EXTRUSION_BSV"
1080 msgstr "Base Shape + Vector"
1082 msgid "GEOM_EXTRUSION_BSV_2P"
1083 msgstr "Base Shape + 2 Points"
1085 #: GeometryGUI_PropertiesDlg.cxx:56
1086 msgid "GEOM_PROPERTIES_TITLE"
1087 msgstr "Basic Properties Informations"
1089 #: GeometryGUI_PropertiesDlg.cxx:78
1090 msgid "GEOM_PROPERTIES_CONSTR"
1091 msgstr "Object And Its Properties"
1093 #: GeometryGUI_PropertiesDlg.cxx:114
1094 msgid "GEOM_PROPERTIES_SURFACE"
1095 msgstr "Surface is :"
1097 #: GeometryGUI_PropertiesDlg.cxx:120
1098 msgid "GEOM_PROPERTIES_VOLUME"
1099 msgstr "Volume is :"
1101 #: GeometryGUI_RevolDlg.cxx:49
1102 msgid "GEOM_REVOLUTION_TITLE"
1103 msgstr "Construction By Revolution"
1105 #: GeometryGUI_RotationDlg.cxx:51
1106 msgid "GEOM_ROTATION_TITLE"
1107 msgstr "Rotation Of An Object"
1109 #: GeometryGUI_ScaleDlg.cxx:52
1110 msgid "GEOM_SCALE_TITLE"
1111 msgstr "Scale An Object"
1113 #: GeometryGUI_PositionDlg.cxx:52
1114 msgid "GEOM_POSITION_TITLE"
1115 msgstr "Modify the Location of an Object"
1117 #: GeometryGUI_PositionDlg.cxx:52
1118 msgid "GEOM_START_LCS"
1121 #: GeometryGUI_PositionDlg.cxx:52
1122 msgid "GEOM_END_LCS"
1125 #: GeometryGUI_OffsetDlg.cxx:53
1126 msgid "GEOM_OFFSET_TITLE"
1127 msgstr "Offset Surface"
1129 #: GeometryGUI_ScaleDlg.cxx:117
1130 msgid "GEOM_SCALE_FACTOR"
1131 msgstr "Scale Factor :"
1133 #: GeometryGUI_SectionDlg.cxx:50
1134 msgid "GEOM_SECTION_TITLE"
1135 msgstr "BOOLEAN : Section Of Two Objects"
1137 #: GeometryGUI_SewingDlg.cxx:48
1138 msgid "GEOM_SEWING_TITLE"
1139 msgstr "Topological sewing"
1141 #: GeometryGUI_ShellDlg.cxx:53
1142 msgid "GEOM_SHELL_TITLE"
1143 msgstr "Shell Construction"
1145 #: GeometryGUI_SolidDlg.cxx:74
1146 msgid "GEOM_SOLID_TITLE"
1147 msgstr "Solid Construction"
1149 #: GeometryGUI_SphereDlg.cxx:50
1150 msgid "GEOM_SPHERE_TITLE"
1151 msgstr "Sphere Construction"
1153 #: GeometryGUI_SphereDlg.cxx:113
1154 msgid "GEOM_SPHERE_CR"
1155 msgstr "Center + Radius"
1157 #: GeometryGUI_SphereDlg.cxx:146
1158 msgid "GEOM_SPHERE_RO"
1159 msgstr "Radius At Origin"
1161 #: GeometryGUI_SubShapeDlg.cxx:55
1162 msgid "GEOM_SUBSHAPE_TITLE"
1163 msgstr "Sub Shapes Selection"
1165 #: GeometryGUI_SubShapeDlg.cxx:131
1166 msgid "GEOM_SUBSHAPE_TYPE"
1167 msgstr "Sub Shapes Type :"
1169 #: GeometryGUI_SubShapeDlg.cxx:137
1170 msgid "GEOM_SUBSHAPE_SELECT"
1171 msgstr "Select Sub Shapes"
1173 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1174 msgstr "Please, select one or more sub-shapes"
1176 #: GeometryGUI_TorusDlg.cxx:51
1177 msgid "GEOM_TORUS_TITLE"
1178 msgstr "Torus Construction"
1180 #: GeometryGUI_SuppressFacesDlg.cxx:103
1181 msgid "GEOM_SUPRESSFACE_TITLE"
1182 msgstr "Suppress Faces In An Object"
1184 #: GeometryGUI_SuppressFacesDlg.cxx:164
1185 msgid "GEOM_SUPRESSFACE_SELECT"
1186 msgstr "Select Faces To Suppress"
1188 #: GeometryGUI_TranslationDlg.cxx:78
1189 msgid "GEOM_TRANSLATION_COOR"
1190 msgstr "Translation With Coordinates"
1192 msgid "GEOM_TRANSPARENCY_TITLE"
1193 msgstr "Transparency"
1195 msgid "GEOM_TRANSPARENCY_OPAQUE"
1198 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1199 msgstr "Transparent"
1201 msgid "GEOM_SUPPRESSHOLE_TITLE"
1202 msgstr "Suppress holes"
1204 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1205 msgstr "Select the face with hole"
1207 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1208 msgstr "Select wire on face"
1210 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1211 msgstr "Select end face (if hole traversing)"
1213 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1214 msgstr "Select end wire (if hole traversing)"
1216 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1217 msgstr "Face or shell"
1219 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1220 msgstr "Select hole(s) on the face"
1222 #: GeometryGUI_TranslationDlg.cxx:56
1223 msgid "GEOM_TRANSLATION_TITLE"
1224 msgstr "Translation Of An Object"
1226 #: GeometryGUI_VectorDlg.cxx:54
1227 msgid "GEOM_VECTOR_TITLE"
1228 msgstr "Vector Construction"
1230 #: GeometryGUI_WhatisDlg.cxx:63
1231 msgid "GEOM_WHATIS_TITLE"
1232 msgstr "Whatis Informations"
1234 #: GeometryGUI_WhatisDlg.cxx:86
1235 msgid "GEOM_WHATIS_OBJECT"
1236 msgstr "Object And Its Topological Informations"
1238 #: GeometryGUI_WireDlg.cxx:46
1239 msgid "GEOM_WIRE_TITLE"
1240 msgstr "Create A Wire"
1242 #: GeometryGUI_WireDlg.cxx:103
1243 msgid "GEOM_WIRE_CONNECT"
1244 msgstr "Wire creation from wires/edges connected"
1246 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1247 msgid "GEOM_WPLANE_TITLE"
1248 msgstr "Working Plane Selection"
1250 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1251 msgid "GEOM_WPLANE_FACE"
1252 msgstr "Plane, Planar Face or LCS"
1254 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1255 msgid "GEOM_WPLANE_VECTOR"
1256 msgstr "Select 2 vectors"
1258 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1259 msgid "GEOM_WPLANE_VX"
1262 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1263 msgid "GEOM_WPLANE_VZ"
1266 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1267 msgid "GEOM_WPLANE_ORIGIN"
1268 msgstr "Select a plane"
1270 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1271 msgid "GEOM_WPLANE_OYZ"
1274 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1275 msgid "GEOM_WPLANE_OZX"
1278 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1279 msgid "GEOM_WPLANE_OXY"
1282 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1283 msgid "GEOM_REVERSE_PLANE"
1284 msgstr "Reverse the plane normal"
1286 #: GeometryGUI_multiTranslationDlg.cxx:107
1287 msgid "GEOM_MULTITRANSLATION_TITLE"
1288 msgstr "Multi-Translation"
1290 #: GeometryGUI_multiTranslationDlg.cxx:107
1291 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1292 msgstr "Multi Translation Simple"
1294 #: GeometryGUI_multiTranslationDlg.cxx:107
1295 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1296 msgstr "Multi Translation Double"
1298 #: GeometryGUI_multiRotationDlg.cxx:107
1299 msgid "GEOM_MULTIROTATION_TITLE"
1300 msgstr "Multi-Rotation"
1302 #: GeometryGUI_multiRotationDlg.cxx:107
1303 msgid "GEOM_MULTIROTATION_SIMPLE"
1304 msgstr "Multi Rotation Simple"
1306 #: GeometryGUI_multiRotationDlg.cxx:107
1307 msgid "GEOM_MULTIROTATION_DOUBLE"
1308 msgstr "Multi Rotation Double"
1310 msgid "GEOM_PARAM_POINT"
1311 msgstr "Parametric point"
1313 msgid "GEOM_REF_POINT"
1314 msgstr "Point with reference"
1317 #==============================================================================
1320 #: GeometryGUI.cxx:4613
1321 msgid "GEOM_MEN_WIREFRAME"
1324 #: GeometryGUI.cxx:4613
1325 msgid "GEOM_MEN_SHADING"
1328 msgid "GEOM_RECONSTRUCTION_LIMIT"
1329 msgstr "Reconstruction Limit"
1331 msgid "GEOM_KEEP_NONLIMIT_SHAPES"
1332 msgstr "Keep nonlimit shapes"
1334 msgid "GEOM_SUPPRESS_RESULT"
1335 msgstr "Suppress Result"
1337 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1340 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1343 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1345 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1347 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1349 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1351 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1353 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1355 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1358 msgid "GEOM_SPLINE_TITLE"
1359 msgstr "Spline Construction"
1364 msgid "GEOM_INTERPOL"
1365 msgstr "Interpolation"
1368 #==============================================================================
1371 msgid "GEOM_SKETCHER_EL"
1372 msgstr "Element Type"
1374 msgid "GEOM_BUT_CLOSE_SKETCH"
1375 msgstr "Sketch Closure"
1377 msgid "GEOM_BUT_END_SKETCH"
1378 msgstr "Sketch Validation"
1380 msgid "GEOM_SKETCHER_TITLE"
1381 msgstr "Sketch Construction"
1383 msgid "GEOM_SKETCHER_POINT"
1386 msgid "GEOM_SKETCHER_SEGMENT"
1389 msgid "GEOM_SKETCHER_ARC"
1392 msgid "GEOM_SKETCHER_DIR"
1395 msgid "GEOM_SKETCHER_POINT2"
1398 msgid "GEOM_SKETCHER_DEST"
1399 msgstr "Destination"
1401 msgid "GEOM_SKETCHER_ABS"
1404 msgid "GEOM_SKETCHER_REL"
1407 msgid "GEOM_SKETCHER_SEL"
1410 msgid "GEOM_SKETCHER_ANGLE"
1413 msgid "GEOM_SKETCHER_PER"
1414 msgstr "Perpendicular"
1416 msgid "GEOM_SKETCHER_TAN"
1419 msgid "GEOM_SKETCHER_VXVY"
1422 msgid "GEOM_SKETCHER_LENGTH"
1425 msgid "GEOM_SKETCHER_X"
1428 msgid "GEOM_SKETCHER_Y"
1431 msgid "GEOM_SKETCHER_X2"
1434 msgid "GEOM_SKETCHER_Y2"
1437 msgid "GEOM_SKETCHER_X3"
1440 msgid "GEOM_SKETCHER_Y3"
1443 msgid "GEOM_SKETCHER_DX2"
1446 msgid "GEOM_SKETCHER_DY2"
1449 msgid "GEOM_SKETCHER_VX2"
1452 msgid "GEOM_SKETCHER_VY2"
1455 msgid "GEOM_SKETCHER_LENGTH2"
1458 msgid "GEOM_SKETCHER_ANGLE2"
1461 msgid "GEOM_SKETCHER_RADIUS2"
1464 msgid "GEOM_SKETCHER_UNDO"
1467 msgid "GEOM_SKETCHER_APPLY"
1470 msgid "GEOM_SKETCHER_VALUES"
1473 msgid "GEOM_SKETCHER_TYPE"
1476 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1477 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1479 msgid "GEOM_FILLET_ABORT"
1480 msgstr "Fillet can't be computed with radius %1"
1482 msgid "GEOM_CHAMFER_ABORT"
1483 msgstr "Chamfer can't be computed with %1 and %2"
1485 msgid "GEOM_3_POINTS"
1497 msgid "GEOM_CREATE_COPY"
1498 msgstr "Create a copy"
1500 msgid "GEOM_CREATE_SINGLE_SOLID"
1501 msgstr "Create a single solid"
1506 msgid "GEOM_ERROR_STATUS"
1507 msgstr "Operation status"
1509 msgid "GEOM_ELLIPSE_ERROR_1"
1510 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1515 msgid "GEOM_POLYLINE"
1521 msgid "GEOM_CURVE_TITLE"
1522 msgstr "Curve Construction"
1524 # ShapeProcessDlg.cxx
1525 msgid "GEOM_SHAPEPROCESS_TITLE"
1526 msgstr "Shape Processing"
1531 msgid "GEOM_SELECTED_OBJECTS"
1532 msgstr "Selected objects"
1534 msgid "GEOM_OPERATIONS"
1537 msgid "GEOM_PARAMETERS"
1540 msgid "GEOM_FixShape"
1543 msgid "GEOM_FixFaceSize"
1544 msgstr "FixFaceSize"
1546 msgid "GEOM_DropSmallEdges"
1547 msgstr "DropSmallEdges"
1549 msgid "GEOM_SplitAngle"
1552 msgid "GEOM_SplitClosedFaces"
1553 msgstr "SplitClosedFaces"
1555 msgid "GEOM_SplitContinuity"
1556 msgstr "SplitContinuity"
1558 msgid "GEOM_BSplineRestriction"
1559 msgstr "BSplineRestriction"
1561 msgid "GEOM_ToBezier"
1564 msgid "GEOM_SameParameter"
1565 msgstr "SameParameter"
1567 msgid "GEOM_3D_TOLERANCE"
1568 msgstr "3D tolerance"
1570 msgid "GEOM_MAX_3D_TOLERANCE"
1571 msgstr "Max 3D tolerance"
1573 msgid "GEOM_MAX_TOLERANCE"
1574 msgstr "Max tolerance"
1576 msgid "GEOM_ANGLE_1"
1579 msgid "GEOM_NUM_SPLIT_POINTS"
1580 msgstr "Number of splitting points"
1582 msgid "GEOM_SURFACE_CONTINUTY"
1583 msgstr "Surface continuity"
1585 msgid "GEOM_CURVE_CONTINUTY"
1586 msgstr "Curve continuity"
1588 msgid "GEOM_SURFACE_MODE"
1589 msgstr "Surface mode"
1591 msgid "GEOM_3D_CURVE_MODE"
1592 msgstr "3D curve mode"
1594 msgid "GEOM_2D_CURVE_MODE"
1595 msgstr "2D curve mode"
1597 msgid "GEOM_2D_TOLERANCE"
1598 msgstr "2D tolerance"
1600 msgid "GEOM_REQUIRED_DEGREE"
1601 msgstr "Required degree"
1603 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1604 msgstr "Required number of segments"
1606 msgid "GEOM_3D_CONTINUTY"
1607 msgstr "3D continuity"
1609 msgid "GEOM_2D_CONTINUTY"
1610 msgstr "2D continuity"
1612 msgid "GEOM_CLOSECONTOUR_TITLE"
1613 msgstr "Close contour"
1615 msgid "GEOM_ERR_LIB_NOT_FOUND"
1616 msgstr "GUI library corresponding to the user action can not be found or loaded"
1618 msgid "OperationGUI_ChamferDlg::FACE_1"
1621 msgid "OperationGUI_ChamferDlg::FACE_2"
1624 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1625 msgstr "Selected faces"
1627 msgid "OperationGUI_ChamferDlg::D"
1630 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1631 msgstr "Selected edges"
1633 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1634 msgstr "Selected faces"
1636 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1637 msgstr "Suppress internal wires"
1639 msgid "GEOM_INTERNAL_WIRES"
1640 msgstr "Internal wires"
1642 msgid "GEOM_SELECTED_FACE"
1643 msgstr "Selected face"
1645 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1646 msgstr "Remove all internal wires"
1648 msgid "GEOM_REMOVE_HOLES_TITLE"
1649 msgstr "Suppress holes"
1651 msgid "GEOM_SELECTED_SHAPE"
1652 msgstr "Selected shape"
1654 msgid "GEOM_REMOVE_ALL_HOLES"
1655 msgstr "Remove all holes"
1660 msgid "GEOM_WIRES_TO_REMOVE"
1661 msgstr "Wires to remove"
1666 msgid "GEOM_FREE_BOUNDARIES"
1667 msgstr "Free boundaries"
1669 msgid "GEOM_FREE_FACES"
1672 msgid "GEOM_CHANGE_ORIENTATION_TITLE"
1673 msgstr "Change orientation"
1675 msgid "GEOM_CHANGE_ORIENTATION"
1676 msgstr "Objects to change orientation"
1678 msgid "GEOM_BY_PARAMETER"
1679 msgstr "By parameter"
1681 msgid "GEOM_BY_LENGTH"
1684 msgid "GEOM_DIVIDE_EDGE_TITLE"
1685 msgstr "Addition of point"
1687 msgid "GEOM_ADD_POINT"
1693 msgid "GEOM_MARKER_TITLE"
1694 msgstr "Create marker"
1699 msgid "GEOM_TRIHEDRON"
1702 msgid "GEOM_FREE_BOUNDS_MSG"
1703 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1705 msgid "GEOM_FREE_BOUNDS_ERROR"
1706 msgstr "Object is not selected"
1708 msgid "GEOM_FREE_BOUNDS_TLT"
1709 msgstr "Free boundary detection"
1711 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1712 msgstr "Check free boundaries"
1714 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1715 msgstr "Free boundaries"
1717 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1718 msgstr "Number of closed free boundaries: "
1720 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1721 msgstr "Number of open free boundaries: "
1723 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1724 msgstr "Please, select at least one Shape Process operation to proceed."
1726 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1727 msgstr "Please, select a geometrical object for Shape Processing."
1729 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1730 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1732 msgid "MeasureGUI_PointDlg::POINT"
1735 msgid "MeasureGUI_PointDlg::X"
1738 msgid "MeasureGUI_PointDlg::Y"
1741 msgid "MeasureGUI_PointDlg::Z"
1744 msgid "MeasureGUI_PointDlg::CAPTION"
1745 msgstr "Point Coordinates"
1747 msgid "MeasureGUI_PointDlg::COORDINATES"
1748 msgstr "Point and its coordinates"
1750 msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
1751 msgstr "Check also geometry"
1753 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1754 msgstr "Create Group"
1756 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1759 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1762 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1765 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1766 msgstr "Main Shape And Sub-Shapes"
1768 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1771 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1772 msgstr "Select Sub-Shapes"
1774 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1777 msgid "GroupGUI_GroupDlg::ADD"
1780 msgid "GroupGUI_GroupDlg::REMOVE"
1783 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1786 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1787 msgstr "Please, specify a non-empty group name"
1789 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1790 msgstr "Please, select a main shape"
1792 msgid "GroupGUI_GroupDlg::NO_GROUP"
1793 msgstr "Please, select a group to edit"
1795 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1796 msgstr "Please, select one or more sub-shapes to put into the group"
1798 msgid "GroupGUI::NO_GROUP"
1799 msgstr "Please, select a group to edit"
1806 msgid "WRN_NOT_IMPLEMENTED"
1807 msgstr "Sorry, this functionality is not yet implemented"
1809 ### BlocksGUI_TrsfDlg ###
1811 msgid "BlocksGUI_TrsfDlg::FACE_1"
1814 msgid "BlocksGUI_TrsfDlg::FACE_2"
1817 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1820 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1823 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1826 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1829 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1830 msgstr "Block Multi-Transformation"
1832 msgid "GEOM_BLOCK_MULTITRSF"
1833 msgstr "Block Multi-Transformation"
1835 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1836 msgstr "Multi-Transformation Simple"
1838 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1839 msgstr "Multi-Transformation Double"
1841 ### BlocksGUI_QuadFaceDlg ###
1843 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1846 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1849 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1852 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1855 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1858 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1861 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1864 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1867 msgid "GEOM_QUAD_FACE_TITLE"
1868 msgstr "Quadrangle Face Construction"
1870 msgid "GEOM_QUAD_FACE"
1871 msgstr "Quadrangle Face"
1873 ### BlocksGUI_BlockDlg ###
1875 msgid "BlocksGUI_BlockDlg::FACE_1"
1878 msgid "BlocksGUI_BlockDlg::FACE_2"
1881 msgid "BlocksGUI_BlockDlg::FACE_3"
1884 msgid "BlocksGUI_BlockDlg::FACE_4"
1887 msgid "BlocksGUI_BlockDlg::FACE_5"
1890 msgid "BlocksGUI_BlockDlg::FACE_6"
1893 msgid "GEOM_BLOCK_TITLE"
1894 msgstr "Hexahedral Solid Construction"
1897 msgstr "Hexahedral Solid"
1899 #==============================================================================
1901 msgid "BasicGUI_MarkerDlg::CAPTION"
1902 msgstr "Local CS Construction"
1904 msgid "BasicGUI_MarkerDlg::LOCALCS"
1905 msgstr "Local coordinate system"
1907 msgid "BasicGUI_MarkerDlg::ORIGIN"
1908 msgstr "Coordinates of origin"
1910 msgid "BasicGUI_MarkerDlg::XDIR"
1911 msgstr "X axis direction"
1913 msgid "BasicGUI_MarkerDlg::YDIR"
1914 msgstr "Y axis direction"
1916 msgid "BasicGUI_MarkerDlg::DX"
1919 msgid "BasicGUI_MarkerDlg::DY"
1922 msgid "BasicGUI_MarkerDlg::DZ"
1925 msgid "BasicGUI_MarkerDlg::LCS_NAME"
1928 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
1929 msgstr "Coordinate system axes cannot be parallel"
1961 ### BlocksGUI_ExplodeDlg ###
1963 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
1964 msgstr "Min. nb. faces"
1966 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
1967 msgstr "Max. nb. faces"
1969 msgid "GEOM_BLOCK_EXPLODE_TITLE"
1970 msgstr "Sub Blocks Selection"
1972 msgid "GEOM_BLOCK_EXPLODE"
1975 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
1976 msgstr "There are %1 specified blocks and NO other solids"
1978 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
1979 msgstr "There are %1 specified blocks and some other solids"
1981 msgid "ShHealOper_NotError_msg"
1982 msgstr "Shape Healing algorithm has done no modification of the original shape"
1984 msgid "ShHealOper_InvalidParameters_msg"
1985 msgstr "Incorrect parameters for Shape Healing algorithm"
1987 msgid "ShHealOper_ErrorExecution_msg"
1988 msgstr "Shape Healing algorithm failed"
1990 msgid "GEOM_GLUE_TITLE"
1996 msgid "RepairGUI_GlueDlg::SELECT_FACES"
1997 msgstr "Select Faces"
1999 msgid "RepairGUI_GlueDlg::FACES_FOR_GLUING_ARE_DETECTED"
2000 msgstr "There are %1 face(s) that can be glued. They are coloured on the screen with red colour\nPlease close this message box and select faces for glueing"
2002 msgid "RepairGUI_GlueDlg::GLUE_FACES"
2005 msgid "RepairGUI_GlueDlg::THERE_ARE_NO_FACES_FOR_GLUING"
2006 msgstr "There are no faces for gluing"
2008 msgid "GEOM_FREE_FACES_TITLE"
2011 ### New object names for RepairGUI ###
2012 msgid "SEWING_NEW_OBJ_NAME"
2015 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
2018 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
2019 msgstr "CloseContour"
2021 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
2022 msgstr "SupressHoles"
2024 msgid "GLUE_NEW_OBJ_NAME"
2027 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
2028 msgstr "RemoveIntWires"
2030 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
2031 msgstr "ProcessShape"
2033 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
2034 msgstr "SupressFaces"
2036 msgid "CHANGE_ORIENTATION_NEW_OBJ_NAME"
2039 msgid "NON_GEOM_OBJECTS_SELECTED"
2040 msgstr "There are objects selected which do not belong to %1 component."
2042 msgid "GEOM_PROPAGATE_TITLE"
2045 msgid "GEOM_PROPAGATE"
2048 ### Menu of GEOM module ###
2053 msgstr "Import geometry from BREP file"
2059 msgstr "Import geometry from BREP file"
2062 msgstr "Export geometry to BREP file"
2068 msgstr "Export geometry to BREP file"
2074 msgstr "Delete object"
2080 msgstr "Delete object"
2082 msgid "MEN_NEW_ENTITY"
2089 msgstr "Create a point"
2095 msgstr "Create a point"
2098 msgstr "Create a line"
2104 msgstr "Create a line"
2107 msgstr "Create a circle"
2113 msgstr "Create a circle"
2116 msgstr "Create an ellipse"
2122 msgstr "Create an ellipse"
2125 msgstr "Create an arc"
2131 msgstr "Create an arc"
2134 msgstr "Create a curve"
2140 msgstr "Create a curve"
2143 msgstr "Create a vector"
2149 msgstr "Create a vector"
2152 msgstr "Create a plane"
2158 msgstr "Create a plane"
2160 msgid "TOP_WORK_PLANE"
2161 msgstr "Create a working plane"
2163 msgid "MEN_WORK_PLANE"
2164 msgstr "Working plane"
2166 msgid "STB_WORK_PLANE"
2167 msgstr "Create a working plane"
2169 msgid "TOP_LOCAL_CS"
2170 msgstr "Create a local coordinate system"
2172 msgid "MEN_LOCAL_CS"
2173 msgstr "Local coordinate system"
2175 msgid "STB_LOCAL_CS"
2176 msgstr "Create a local coordinate system"
2178 msgid "MEN_PRIMITIVES"
2182 msgstr "Create a box"
2188 msgstr "Create a box"
2190 msgid "TOP_CYLINDER"
2191 msgstr "Create a cylinder"
2193 msgid "MEN_CYLINDER"
2196 msgid "STB_CYLINDER"
2197 msgstr "Create a cylinder"
2200 msgstr "Create a sphere"
2206 msgstr "Create a sphere"
2209 msgstr "Create a torus"
2215 msgstr "Create a torus"
2218 msgstr "Create a cone"
2224 msgstr "Create a cone"
2226 msgid "MEN_GENERATION"
2229 msgid "TOP_EXTRUSION"
2230 msgstr "Create an extrusion"
2232 msgid "MEN_EXTRUSION"
2235 msgid "STB_EXTRUSION"
2236 msgstr "Create an extrusion"
2238 msgid "TOP_REVOLUTION"
2239 msgstr "Create a revolution"
2241 msgid "MEN_REVOLUTION"
2244 msgid "STB_REVOLUTION"
2245 msgstr "Create a revolution"
2248 msgstr "Create a filling"
2254 msgstr "Create a filling"
2257 msgstr "Extrusion along a path"
2260 msgstr "Extrusion along a path"
2263 msgstr "Create a shape by Extrusion along a path"
2268 msgid "TOP_GROUP_CREATE"
2269 msgstr "Create a group"
2271 msgid "MEN_GROUP_CREATE"
2274 msgid "STB_GROUP_CREATE"
2275 msgstr "Create a group"
2277 msgid "TOP_GROUP_EDIT"
2278 msgstr "Edit a group"
2280 msgid "MEN_GROUP_EDIT"
2283 msgid "STB_GROUP_EDIT"
2284 msgstr "Edit a group"
2290 msgstr "Quadrangle Face"
2293 msgstr "Quadrangle Face"
2296 msgstr "Quadrangle Face"
2298 msgid "TOP_HEX_SOLID"
2299 msgstr "Hexahedral Solid"
2301 msgid "MEN_HEX_SOLID"
2302 msgstr "Hexahedral Solid"
2304 msgid "STB_HEX_SOLID"
2305 msgstr "Hexahedral Solid"
2329 msgstr "Build an edge"
2335 msgstr "Build an edge"
2338 msgstr "Build a wire"
2344 msgstr "Build a wire"
2347 msgstr "Build a face"
2353 msgstr "Build a face"
2356 msgstr "Build a shell"
2362 msgstr "Build a shell"
2365 msgstr "Build a solid"
2371 msgstr "Build a solid"
2373 msgid "TOP_COMPOUND"
2374 msgstr "Build a compound"
2376 msgid "MEN_COMPOUND"
2379 msgid "STB_COMPOUND"
2380 msgstr "Build a compound"
2382 msgid "MEN_OPERATIONS"
2424 msgid "MEN_TRANSFORMATION"
2425 msgstr "Transformation"
2427 msgid "TOP_TRANSLATION"
2428 msgstr "Translation"
2430 msgid "MEN_TRANSLATION"
2431 msgstr "Translation"
2433 msgid "STB_TRANSLATION"
2434 msgstr "Translation"
2436 msgid "TOP_ROTATION"
2439 msgid "MEN_ROTATION"
2442 msgid "STB_ROTATION"
2445 msgid "TOP_MODIFY_LOCATION"
2446 msgstr "Modify the Location"
2448 msgid "MEN_MODIFY_LOCATION"
2449 msgstr "Modify the Location"
2451 msgid "STB_MODIFY_LOCATION"
2452 msgstr "Modify the Location"
2455 msgstr "Mirror image"
2458 msgstr "Mirror image"
2461 msgstr "Mirror image"
2464 msgstr "Scale transform"
2467 msgstr "Scale transform"
2470 msgstr "Scale transform"
2473 msgstr "Offset surface"
2476 msgstr "Offset surface"
2479 msgstr "Offset surface"
2481 msgid "TOP_MUL_TRANSLATION"
2482 msgstr "Multi-Translation"
2484 msgid "MEN_MUL_TRANSLATION"
2485 msgstr "Multi-Translation"
2487 msgid "STB_MUL_TRANSLATION"
2488 msgstr "Multi-Translation"
2490 msgid "TOP_MUL_ROTATION"
2491 msgstr "Multi-Rotation"
2493 msgid "MEN_MUL_ROTATION"
2494 msgstr "Multi-Rotation"
2496 msgid "STB_MUL_ROTATION"
2497 msgstr "Multi-Rotation"
2499 msgid "TOP_PARTITION"
2502 msgid "MEN_PARTITION"
2505 msgid "STB_PARTITION"
2508 msgid "TOP_ARCHIMEDE"
2511 msgid "MEN_ARCHIMEDE"
2514 msgid "STB_ARCHIMEDE"
2535 msgid "TOP_CLIPPING"
2536 msgstr "Clipping range"
2538 msgid "MEN_CLIPPING"
2539 msgstr "Clipping range"
2541 msgid "STB_CLIPPING"
2542 msgstr "Clipping range"
2544 msgid "TOP_MUL_TRANSFORM"
2545 msgstr "Multi-transformation"
2547 msgid "MEN_MUL_TRANSFORM"
2548 msgstr "Multi-transformation"
2550 msgid "STB_MUL_TRANSFORM"
2551 msgstr "Multi-transformation"
2553 msgid "TOP_EXPLODE_BLOCKS"
2554 msgstr "Explode on Blocks"
2556 msgid "MEN_EXPLODE_BLOCKS"
2557 msgstr "Explode on Blocks"
2559 msgid "STB_EXPLODE_BLOCKS"
2560 msgstr "Explode on Blocks"
2562 msgid "TOP_PROPAGATE"
2565 msgid "MEN_PROPAGATE"
2568 msgid "STB_PROPAGATE"
2574 msgid "TOP_SHAPE_PROCESS"
2575 msgstr "Perform shape processing"
2577 msgid "MEN_SHAPE_PROCESS"
2578 msgstr "Shape processing"
2580 msgid "STB_SHAPE_PROCESS"
2581 msgstr "Perform shape processing "
2583 msgid "TOP_SUPPRESS_FACES"
2584 msgstr "Perform suppress faces"
2586 msgid "MEN_SUPPRESS_FACES"
2587 msgstr "Suppress faces"
2589 msgid "STB_SUPPRESS_FACES"
2590 msgstr "Perform suppress faces"
2592 msgid "TOP_CLOSE_CONTOUR"
2593 msgstr "Perform close contour"
2595 msgid "MEN_CLOSE_CONTOUR"
2596 msgstr "Close contour"
2598 msgid "STB_CLOSE_CONTOUR"
2599 msgstr "Perform close contour"
2601 msgid "TOP_SUPPRESS_INT_WIRES"
2602 msgstr "Perform suppress internal wires"
2604 msgid "MEN_SUPPRESS_INT_WIRES"
2605 msgstr "Suppress internal wires"
2607 msgid "STB_SUPPRESS_INT_WIRES"
2608 msgstr "Perform suppress internal wires"
2610 msgid "TOP_SUPPERSS_HOLES"
2611 msgstr "Perform suppress holes"
2613 msgid "MEN_SUPPERSS_HOLES"
2614 msgstr "Suppress holes"
2616 msgid "STB_SUPPERSS_HOLES"
2617 msgstr "Perform suppress holes"
2620 msgstr "Perform sewing"
2626 msgstr "Perform sewing"
2628 msgid "TOP_GLUE_FACES"
2629 msgstr "Perform glue faces"
2631 msgid "MEN_GLUE_FACES"
2634 msgid "STB_GLUE_FACES"
2635 msgstr "Perform glue faces"
2637 msgid "TOP_POINT_ON_EDGE"
2638 msgstr "Add point on edge"
2640 msgid "MEN_POINT_ON_EDGE"
2641 msgstr "Add point on edge"
2643 msgid "STB_POINT_ON_EDGE"
2644 msgstr "Add point on edge"
2646 msgid "TOP_CHECK_FREE_BNDS"
2647 msgstr "Check free boundaries"
2649 msgid "MEN_CHECK_FREE_BNDS"
2650 msgstr "Check free boundaries"
2652 msgid "STB_CHECK_FREE_BNDS"
2653 msgstr "Check free boundaries"
2655 msgid "TOP_CHECK_FREE_FACES"
2656 msgstr "Check free faces"
2658 msgid "MEN_CHECK_FREE_FACES"
2659 msgstr "Check free faces"
2661 msgid "STB_CHECK_FREE_FACES"
2662 msgstr "Check free faces"
2664 msgid "TOP_CHANGE_ORIENTATION"
2665 msgstr "Change orientation"
2667 msgid "MEN_CHANGE_ORIENTATION"
2668 msgstr "Change orientation"
2670 msgid "STB_CHANGE_ORIENTATION"
2671 msgstr "Change orientation"
2673 msgid "MEN_MEASURES"
2676 msgid "TOP_POINT_COORDS"
2677 msgstr "Point coordinates"
2679 msgid "MEN_POINT_COORDS"
2680 msgstr "Point coordinates"
2682 msgid "STB_POINT_COORDS"
2683 msgstr "Point coordinates"
2685 msgid "TOP_BASIC_PROPS"
2686 msgstr "Basic properties"
2688 msgid "MEN_BASIC_PROPS"
2689 msgstr "Basic properties"
2691 msgid "STB_BASIC_PROPS"
2692 msgstr "Basic properties"
2694 msgid "TOP_MASS_CENTER"
2695 msgstr "Compute center of mass"
2697 msgid "MEN_MASS_CENTER"
2698 msgstr "Center of mass"
2700 msgid "STB_MASS_CENTER"
2701 msgstr "Compute center of mass"
2704 msgstr "Compute intertia"
2710 msgstr "Compute intertia"
2712 msgid "MEN_DIMENSIONS"
2716 msgstr "Compute bounding box"
2719 msgstr "Bounding box"
2722 msgstr "Compute bounding box"
2724 msgid "TOP_MIN_DIST"
2725 msgstr "Compute minimum distance"
2727 msgid "MEN_MIN_DIST"
2728 msgstr "Min distance"
2730 msgid "STB_MIN_DIST"
2731 msgstr "Compute minimum distance"
2733 msgid "TOP_MEASURE_ANGLE"
2734 msgstr "Compute angle"
2736 msgid "MEN_MEASURE_ANGLE"
2739 msgid "STB_MEASURE_ANGLE"
2740 msgstr "Compute angle between two lines or linear edges"
2742 msgid "TOP_TOLERANCE"
2743 msgstr "Compute tolerance"
2745 msgid "MEN_TOLERANCE"
2746 msgstr "Compute tolerance"
2748 msgid "STB_TOLERANCE"
2749 msgstr "Compute tolerance"
2769 msgid "TOP_CHECK_COMPOUND"
2770 msgstr "Check compound of blocks"
2772 msgid "MEN_CHECK_COMPOUND"
2773 msgstr "Check compound of blocks"
2775 msgid "STB_CHECK_COMPOUND"
2776 msgstr "Check compound of blocks"
2781 msgid "TOP_CHECK_GEOMETRY"
2782 msgstr "Check Geometry"
2784 msgid "MEN_CHECK_GEOMETRY"
2785 msgstr "Check Geometry"
2787 msgid "STB_CHECK_GEOMETRY"
2788 msgstr "Check Geometry"
2790 msgid "MEN_PREFERENCES"
2791 msgstr "Preferences"
2793 msgid "MEN_PREFERENCES_GEOM"
2796 msgid "TOP_SHADING_COLOR"
2797 msgstr "Set shading color"
2799 msgid "MEN_SHADING_COLOR"
2800 msgstr "Shading color"
2802 msgid "STB_SHADING_COLOR"
2803 msgstr "Set shading color"
2806 msgstr "Set number of isolines"
2812 msgstr "Set number of isolines"
2814 msgid "TOP_STEP_VALUE"
2815 msgstr "Set step value"
2817 msgid "MEN_STEP_VALUE"
2820 msgid "STB_STEP_VALUE"
2821 msgstr "Set step value"
2826 msgid "MEN_DISPLAY_MODE"
2827 msgstr "Display mode"
2835 msgid "MEN_WIREFRAME"
2841 msgid "TOP_DISPLAY_ALL"
2842 msgstr "Display all"
2844 msgid "MEN_DISPLAY_ALL"
2845 msgstr "Display all"
2847 msgid "STB_DISPLAY_ALL"
2848 msgstr "Display all"
2850 msgid "TOP_ERASE_ALL"
2853 msgid "MEN_ERASE_ALL"
2856 msgid "STB_ERASE_ALL"
2868 msgid "TOP_DISPLAY_ONLY"
2869 msgstr "Display only"
2871 msgid "MEN_DISPLAY_ONLY"
2872 msgstr "Display only"
2874 msgid "STB_DISPLAY_ONLY"
2875 msgstr "Display only"
2886 msgid "TOP_POP_RENAME"
2889 msgid "MEN_POP_RENAME"
2892 msgid "STB_POP_RENAME"
2895 msgid "TOP_POP_WIREFRAME"
2898 msgid "MEN_POP_WIREFRAME"
2901 msgid "STB_POP_WIREFRAME"
2904 msgid "TOP_POP_SHADING"
2907 msgid "MEN_POP_SHADING"
2910 msgid "STB_POP_SHADING"
2913 msgid "TOP_POP_COLOR"
2916 msgid "MEN_POP_COLOR"
2919 msgid "STB_POP_COLOR"
2922 msgid "TOP_POP_TRANSPARENCY"
2923 msgstr "Transparency"
2925 msgid "MEN_POP_TRANSPARENCY"
2926 msgstr "Transparency"
2928 msgid "STB_POP_TRANSPARENCY"
2929 msgstr "Transparency"
2931 msgid "TOP_POP_ISOS"
2934 msgid "MEN_POP_ISOS"
2937 msgid "STB_POP_ISOS"
2940 msgid "TOP_POP_CREATE_GROUP"
2941 msgstr "Create Group"
2943 msgid "MEN_POP_CREATE_GROUP"
2944 msgstr "Create Group"
2946 msgid "STB_POP_CREATE_GROUP"
2947 msgstr "Create Group"
2952 msgid "TOOL_PRIMITIVES"
2955 msgid "TOOL_BOOLEAN"
2956 msgstr "Boolean operations"
2958 msgid "TOOL_GENERATION"
2961 msgid "TOOL_TRANSFORMATION"
2962 msgstr "Transformation"
2970 msgid "GEOM_RESULT_NAME_GRP"
2971 msgstr "Result name"
2973 msgid "GEOM_RESULT_NAME_LBL"
2976 msgid "GEOM_ERR_GET_ENGINE"
2977 msgstr "Failed to obtain GEOM Engine component. Reload Geometry module and try again."
2979 msgid "PREF_GROUP_OCCVIEWER"
2980 msgstr "OCC Viewer 3d"
2982 msgid "PREF_GROUP_GENERAL"
2985 msgid "PREF_GROUP_VERTEX"
2986 msgstr "Marker of Points"
2988 msgid "PREF_SHADING_COLOR"
2989 msgstr "Default shading color"
2991 msgid "PREF_WIREFRAME_COLOR"
2992 msgstr "Default wireframe color"
2994 msgid "PREF_FREE_BOUND_COLOR"
2995 msgstr "Color of free boundaries"
2997 msgid "PREF_LINE_COLOR"
2998 msgstr "Color of edges, vectors, wires"
3000 msgid "PREF_POINT_COLOR"
3001 msgstr "Color of points"
3003 msgid "PREF_ISOS_COLOR"
3004 msgstr "Color of isolines"
3006 msgid "PREF_STEP_VALUE"
3007 msgstr "Step value for spin boxes"
3009 msgid "PREF_DISPLAY_MODE"
3010 msgstr "Default display mode"
3012 msgid "PREF_TAB_SETTINGS"
3015 msgid "PREF_TYPE_OF_MARKER"
3018 msgid "PREF_MARKER_SCALE"
3048 msgid "ERROR_SHAPE_TYPE"
3049 msgstr "Object of incorrect type selected!\nPlease, select face, shell or solid and try again"
3052 msgstr "Selected object has been used to create another one\n It can't be deleted "
3054 msgid "MEN_SELECT_ONLY"
3055 msgstr "Select Only"
3057 msgid "STB_VERTEX_SEL_ONLY"
3058 msgstr "Select only a Points"
3060 msgid "STB_EDGE_SEL_ONLY"
3061 msgstr "Select only a Edges"
3063 msgid "STB_WIRE_SEL_ONLY"
3064 msgstr "Select only a Wires"
3066 msgid "STB_FACE_SEL_ONLY"
3067 msgstr "Select only a Faces"
3069 msgid "STB_SHELL_SEL_ONLY"
3070 msgstr "Select only a Shells"
3072 msgid "STB_SOLID_SEL_ONLY"
3073 msgstr "Select only a Solids"
3075 msgid "STB_COMPOUND_SEL_ONLY"
3076 msgstr "Select only a Compounds"
3078 msgid "STB_ALL_SEL_ONLY"
3079 msgstr "Select all Objects"
3081 msgid "MEN_VERTEX_SEL_ONLY"
3084 msgid "MEN_EDGE_SEL_ONLY"
3087 msgid "MEN_WIRE_SEL_ONLY"
3090 msgid "MEN_FACE_SEL_ONLY"
3093 msgid "MEN_SHELL_SEL_ONLY"
3096 msgid "MEN_SOLID_SEL_ONLY"
3099 msgid "MEN_COMPOUND_SEL_ONLY"
3102 msgid "MEN_ALL_SEL_ONLY"