1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: 2003-10-27 17:32+0100\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
65 msgid "GEOM_BUT_EXPLODE"
69 #==============================================================================
72 #: GeometryGUI.cxx:563
73 msgid "GEOM_INF_LOADED"
74 msgstr "File %1 loaded."
77 #==============================================================================
80 #: GeometryGUI.cxx:3069
81 msgid "GEOM_PRP_COMMAND"
82 msgstr "No command associated with this id = %1."
84 #: GeometryGUI.cxx:4977
85 msgid "GEOM_PRP_ABORT"
86 msgstr "Operation aborted"
88 #: GeometryGUI.cxx:5058
90 msgstr "Operation done"
92 #: GeometryGUI.cxx:3717
93 msgid "GEOM_PRP_LOADING"
94 msgstr "Loading %1 ..."
96 #: GeometryGUI.cxx:1412
97 msgid "GEOM_PRP_NULLSHAPE"
98 msgstr "Error, null or inappropriate shape !"
100 #: GeometryGUI.cxx:5072
101 msgid "GEOM_PRP_READY"
104 #: GeometryGUI.cxx:1690
105 msgid "GEOM_PRP_SELECT_SUBSHAPES"
106 msgstr "Select Sub Shapes"
108 msgid "GEOM_PRP_EXPORT"
109 msgstr "Exporting geometry to %1 ..."
112 msgstr "Confirm operation"
114 msgid "GEOM_CONFIRM_INFO"
115 msgstr "Shape contains %1 sub shapes !"
118 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
119 msgstr "Not allowed in VTK viewer"
121 #: GeometryGUI.cxx:1690
122 msgid "GEOM_PRP_SHAPE_IN_STUDY"
123 msgstr "Main shape must be in the study before"
125 #: GeometryGUI.cxx:1690
126 msgid "GEOM_PRP_SELECT_EDGE"
127 msgstr "Select edges and click on Apply"
129 #: GeometryGUI.cxx:1690
130 msgid "GEOM_PRP_SELECT_FACE"
131 msgstr "Select faces to suppress and click on Ok/Apply"
133 #: GeometryGUI.cxx:1690
134 msgid "GEOM_PRP_SELECT_FIRST"
135 msgstr "Select main shape first"
137 #: GeometryGUI.cxx:1690
138 msgid "GEOM_PRP_MIN_DIST"
139 msgstr "Min Distance not computed"
141 msgid "GEOM_STUDY_LOCKED"
142 msgstr "The active study is locked and therefore cannot be modified"
145 #==============================================================================
148 #: GeometryGUI.cxx:3698
149 msgid "GEOM_MEN_ALL_FILES"
150 msgstr "All Files ( * )"
152 #: GeometryGUI.cxx:4389
153 msgid "GEOM_MEN_ANGLE"
156 #: GeometryGUI.cxx:3941
157 msgid "GEOM_MEN_COMPONENT"
160 #: GeometryGUI.cxx:4389
161 msgid "GEOM_MEN_ENTER_ANGLE"
162 msgstr "Enter An Angle In Degrees"
164 #: GeometryGUI.cxx:3758
165 msgid "GEOM_MEN_EXPORT"
168 #: GeometryGUI.cxx:3648
169 msgid "GEOM_MEN_IMPORT"
172 #: GeometryGUI.cxx:2931
173 msgid "GEOM_MEN_ISOS"
174 msgstr "Select Number Of Isos"
176 #: GeometryGUI.cxx:4278
177 msgid "GEOM_MEN_POPUP_NAME"
180 #: GeometryGUI.cxx:4414
181 msgid "GEOM_MEN_SKETCHER_X"
182 msgstr "Enter a length to set X"
184 #: GeometryGUI.cxx:4438
185 msgid "GEOM_MEN_SKETCHER_Y"
186 msgstr "Enter a length to set Y"
188 #: GeometryGUI.cxx:2898
189 msgid "GEOM_MEN_TRANSPARENCY"
190 msgstr "Transparency"
192 #: GeometryGUI.cxx:4413
196 #: GeometryGUI.cxx:4437
200 #: GeometryGUI_NbIsosDlg.cxx:36
201 msgid "GEOM_MEN_ISOU"
204 #: GeometryGUI_NbIsosDlg.cxx:53
205 msgid "GEOM_MEN_ISOV"
208 #: GeometryGUI_TransparencyDlg.cxx:31
209 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
210 msgstr "Transparency :"
212 msgid "GEOM_MEN_STEP_LABEL"
215 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
216 msgstr "Identical names : select by mouse !"
218 msgid "GEOM_NAME_INCORRECT"
219 msgstr "Object name not found"
221 msgid "GEOM_INCORRECT_INPUT"
222 msgstr "Incorrect input data!"
225 #==============================================================================
228 #: GeometryGUI.cxx:892
229 msgid "GEOM_WRN_RADIUS_NULL"
230 msgstr "Radius is null"
232 #: GeometryGUI.cxx:3854
233 msgid "GEOM_WRN_WARNING"
236 #: GeometryGUI.cxx:3854
237 msgid "GEOM_REALLY_DELETE"
238 msgstr "Do you really want to delete object(s) ?"
241 #==============================================================================
249 msgid "GEOM_MAIN_OBJECT"
253 msgid "GEOM_TOOL_OBJECT"
257 msgid "GEOM_BASE_OBJECT"
261 msgid "GEOM_PATH_OBJECT"
269 msgid "GEOM_OBJECT_I"
273 msgid "GEOM_OBJECT_RESULT"
274 msgstr "Object And Result"
281 msgid "GEOM_BASE_POINT"
285 msgid "GEOM_CENTER_POINT"
286 msgstr "Center Point"
289 msgid "GEOM_DIAGONAL_POINTS"
290 msgstr "Diagonal Points"
293 msgid "GEOM_CENTRAL_POINT"
294 msgstr "Central Point"
305 msgid "GEOM_ARGUMENTS"
317 msgid "GEOM_RADIUS_I"
333 msgid "GEOM_COORDINATES"
345 msgid "GEOM_REVERSE_U"
349 msgid "GEOM_REVERSE_V"
365 msgid "GEOM_VECTOR_LENGTH"
366 msgstr "Vector Length :"
369 msgid "GEOM_REVERSE_VECTOR"
370 msgstr "Reverse Vector"
373 msgid "GEOM_POINT_MIRROR"
374 msgstr "Point Mirror"
377 msgid "GEOM_AXE_MIRROR"
381 msgid "GEOM_PLANE_MIRROR"
382 msgstr "Plane Mirror"
385 msgid "GEOM_FACE_SELECTION"
386 msgstr "Face Selection"
393 msgid "GEOM_WATER_DENSITY"
394 msgstr "Water Density :"
397 msgid "GEOM_MESHING_DEFLECTION"
398 msgstr "Meshing Deflect. :"
401 msgid "GEOM_DIMENSIONS"
405 msgid "GEOM_PRECISION"
409 msgid "GEOM_SELECTION"
413 msgid "GEOM_NB_TIMES"
417 msgid "GEOM_NB_TIMES_U"
418 msgstr "Nb. Times U :"
421 msgid "GEOM_NB_TIMES_V"
422 msgstr "Nb. Times V :"
437 #==============================================================================
441 msgid "GEOM_PARTITION"
444 #Half-space partition
445 msgid "GEOM_PARTITION_HALFSPACE"
446 msgstr "Half-space partition"
449 msgid "GEOM_TOLERANCE"
453 msgid "GEOM_ORIENTATION"
461 msgid "GEOM_REVOLUTION"
465 msgid "GEOM_ROTATION"
469 msgid "GEOM_ARCHIMEDE"
481 msgid "GEOM_DISTANCE"
497 msgid "GEOM_POSITION"
513 msgid "GEOM_TRANSLATION"
518 msgstr "Working Plane"
525 msgid "GEOM_EXTRUSION"
529 msgid "GEOM_SUB_SHAPE"
533 msgid "GEOM_SUPRESSFACE"
534 msgstr "Supress Face"
545 msgid "GEOM_CHECK_SHAPE"
548 #Check Blocks Compound
549 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
550 msgstr "Check and Improve Blocks Compound"
552 #Check Blocks Compound Errors
553 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
556 #Check Blocks Compound Errors
557 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
558 msgstr "The Compound of Blocks has no errors"
560 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
561 msgstr "The Compound of Blocks has errors"
563 #Check Blocks Compound SubShapes
564 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
565 msgstr "Incriminated Sub-Shapes"
573 msgstr "Bounding Box"
577 msgstr "Center Of Mass"
580 msgid "GEOM_PROPERTIES"
581 msgstr "Basic Properties"
584 msgid "GEOM_MULTITRANSLATION"
585 msgstr "Multi-Translation"
588 msgid "GEOM_MULTIROTATION"
589 msgstr "Multi-Rotation"
592 #==============================================================================
611 msgid "GEOM_ELLIPSE_TITLE"
612 msgstr "Ellipse Construction"
615 msgid "GEOM_RADIUS_MAJOR"
616 msgstr "Major radius :"
619 msgid "GEOM_RADIUS_MINOR"
620 msgstr "Minor radius :"
623 msgid "GEOM_COMPOUND"
627 msgid "GEOM_BLOCKS_COMPOUND"
628 msgstr "BlocksCompound"
631 msgid "GEOM_COMPOUNDSOLID"
639 msgid "GEOM_CYLINDER"
655 msgid "GEOM_FACE_OR_LCS"
687 msgid "GEOM_SURFCONE"
688 msgstr "Conical Face"
691 msgid "GEOM_SURFCYLINDER"
692 msgstr "Cylindrical Face"
695 msgid "GEOM_SURFSPHERE"
696 msgstr "Spherical Face"
699 msgid "GEOM_SURFTORUS"
700 msgstr "Toroidal Face"
711 msgid "GEOM_VECTOR_U"
715 msgid "GEOM_VECTOR_V"
735 msgstr "Imported_Shape"
738 msgid "GEOM_PARAMETER"
742 #==============================================================================
786 #==============================================================================
790 msgid "GEOM_STEP_TITLE"
791 msgstr "Step value for GUI constructions"
793 #: GeometryGUI_ArcDlg.cxx:45
794 msgid "GEOM_ARC_TITLE"
795 msgstr "Arc Construction"
797 #: GeometryGUI_ArchimedeDlg.cxx:55
798 msgid "GEOM_ARCHIMEDE_TITLE"
799 msgstr "Archimede Construction"
801 #: GeometryGUI_BndBoxDlg.cxx:59
802 msgid "GEOM_BNDBOX_TITLE"
803 msgstr "Bounding Box Informations"
805 #: GeometryGUI_BndBoxDlg.cxx:82
806 msgid "GEOM_BNDBOX_OBJDIM"
807 msgstr "Object And Its Dimensions"
809 #: GeometryGUI_BoxDlg.cxx:50
810 msgid "GEOM_BOX_TITLE"
811 msgstr "Box Construction"
813 #: GeometryGUI_BoxDlg.cxx:50
815 msgstr "Dimensions At Origin"
817 #: GeometryGUI_ChamferDlg.cxx:58
818 msgid "GEOM_CHAMFER_TITLE"
819 msgstr "Chamfer Construction"
821 #: GeometryGUI_ChamferDlg.cxx:58
822 msgid "GEOM_CHAMFER_ALL"
823 msgstr "Chamfer On Whole Shape"
825 #: GeometryGUI_ChamferDlg.cxx:58
826 msgid "GEOM_CHAMFER_EDGES"
827 msgstr "Chamfer On Edges From Shape"
829 #: GeometryGUI_ChamferDlg.cxx:58
830 msgid "GEOM_CHAMFER_FACES"
831 msgstr "Chamfer On Faces From Shape"
833 #: GeometryGUI_CircleDlg.cxx:48
834 msgid "GEOM_CIRCLE_TITLE"
835 msgstr "Circle Construction"
837 #: GeometryGUI_CenterMassDlg.cxx:77
838 msgid "GEOM_CMASS_TITLE"
839 msgstr "Center Of Mass Construction"
841 msgid "GEOM_PLANE_SIZE"
842 msgstr "Size of plane :"
844 #: GeometryGUI_CommonDlg.cxx:47
845 msgid "GEOM_COMMON_TITLE"
846 msgstr "BOOLEAN : Common Of Two Objects"
848 #: GeometryGUI_CompoundDlg.cxx:44
849 msgid "GEOM_COMPOUND_TITLE"
850 msgstr "Create A Compound"
852 #: GeometryGUI_ConeDlg.cxx:49
853 msgid "GEOM_CONE_TITLE"
854 msgstr "Cone Construction"
856 #: GeometryGUI_CutDlg.cxx:48
857 msgid "GEOM_CUT_TITLE"
858 msgstr "BOOLEAN : Cut Of Two Objects"
860 #: GeometryGUI_CylinderDlg.cxx:47
861 msgid "GEOM_CYLINDER_TITLE"
862 msgstr "Cylinder Construction"
864 #: GeometryGUI_CheckShape.cxx:60
865 msgid "GEOM_CHECK_TITLE"
866 msgstr "Check Shape Informations"
868 #: GeometryGUI_CheckShape.cxx:83
869 msgid "GEOM_CHECK_INFOS"
870 msgstr "Object And Its Topological Informations"
872 #: GeometryGUI_DistanceDlg.cxx:57
873 msgid "GEOM_MINDIST_TITLE"
874 msgstr "Minimun Distance Between Two Objects"
876 #: GeometryGUI_DistanceDlg.cxx:57
877 msgid "GEOM_MINDIST_OBJ"
878 msgstr "Objects And Results"
880 #: GeometryGUI_EdgeDlg.cxx:47
881 msgid "GEOM_EDGE_TITLE"
882 msgstr "Create An Edge"
884 #: GeometryGUI_FilletDlg.cxx:58
885 msgid "GEOM_FILLET_TITLE"
886 msgstr "Fillet Construction"
888 #: GeometryGUI_FilletDlg.cxx:58
889 msgid "GEOM_FILLET_ALL"
890 msgstr "Fillet On Whole Shape"
892 #: GeometryGUI_FilletDlg.cxx:58
893 msgid "GEOM_FILLET_EDGES"
894 msgstr "Fillet On Edges From Shape"
896 #: GeometryGUI_FilletDlg.cxx:58
897 msgid "GEOM_FILLET_FACES"
898 msgstr "Fillet On Faces From Shape"
900 #: GeometryGUI_FaceDlg.cxx:49
901 msgid "GEOM_FACE_TITLE"
902 msgstr "Create A Face"
904 #: GeometryGUI_FaceDlg.cxx:78
905 msgid "GEOM_FACE_FFW"
906 msgstr "Face from a closed wire and edge"
908 #: GeometryGUI_FaceDlg.cxx:103
909 msgid "GEOM_FACE_OPT"
910 msgstr "Try to create a planar face"
912 #: GeometryGUI_FillingDlg.cxx:53
913 msgid "GEOM_FILLING_TITLE"
914 msgstr "Filling Surface With Edges"
916 #: GeometryGUI_FillingDlg.cxx:112
917 msgid "GEOM_FILLING_ARG"
918 msgstr "Arguments And Parameters"
920 #: GeometryGUI_FillingDlg.cxx:128
921 msgid "GEOM_FILLING_MIN_DEG"
924 #: GeometryGUI_FillingDlg.cxx:142
925 msgid "GEOM_FILLING_MAX_DEG"
928 #: GeometryGUI_FillingDlg.cxx:150
929 msgid "GEOM_FILLING_TOL_2D"
932 #: GeometryGUI_FillingDlg.cxx:170
933 msgid "GEOM_FILLING_COMPOUND"
934 msgstr "Edges compound"
936 #: GeometryGUI_FillingDlg.cxx:184
937 msgid "GEOM_FILLING_TOL_3D"
940 #: GeometryGUI_FillingDlg.cxx:192
941 msgid "GEOM_FILLING_NB_ITER"
944 #: GeometryGUI_FuseDlg.cxx:48
945 msgid "GEOM_FUSE_TITLE"
946 msgstr "BOOLEAN : Fuse Two Objects"
948 #: GeometryGUI_InertiaDlg.cxx:42
949 msgid "GEOM_INERTIA_TITLE"
950 msgstr "Calculs Of Inertia"
952 #: GeometryGUI_InertiaDlg.cxx:50
953 msgid "GEOM_INERTIA_CONSTR"
954 msgstr "Matrix And Moments Of Inertia"
956 #: GeometryGUI_InertiaDlg.cxx:100
957 msgid "GEOM_INERTIA_I"
960 #: GeometryGUI_InertiaDlg.cxx:182
961 msgid "GEOM_INERTIA_IXYZ"
962 msgstr "IX & IY & IZ :"
964 #: GeometryGUI_LineDlg.cxx:50
965 msgid "GEOM_LINE_TITLE"
966 msgstr "Line Construction"
968 #: GeometryGUI_MaxToleranceDlg.cxx:53
969 msgid "GEOM_TOLERANCE_TITLE"
970 msgstr "Maximum Tolerance"
972 #: GeometryGUI_MaxToleranceDlg.cxx:84
973 msgid "GEOM_TOLERANCE_CONSTR"
974 msgstr "Object And Its Tolerances"
976 #: GeometryGUI_MaxToleranceDlg.cxx:121
977 msgid "GEOM_TOLERANCE_FACE"
980 #: GeometryGUI_MaxToleranceDlg.cxx:138
981 msgid "GEOM_TOLERANCE_EDGE"
984 #: GeometryGUI_MaxToleranceDlg.cxx:155
985 msgid "GEOM_TOLERANCE_VERTEX"
988 #: GeometryGUI_MirrorDlg.cxx:52
989 msgid "GEOM_MIRROR_TITLE"
990 msgstr "Mirror An Object"
992 #: GeometryGUI_OrientationDlg.cxx:46
993 msgid "GEOM_ORIENTATION_TITLE"
994 msgstr "Change Orientation"
996 #: GeometryGUI_OrientationDlg.cxx:134
997 msgid "GEOM_ORIENTATION_OPT"
998 msgstr "Reverse orientation with normal vectors simulation"
1000 #: GeometryGUI_PartitionDlg.cxx:45
1001 msgid "GEOM_PARTITION_TITLE"
1002 msgstr "Partition Of Object With Tool"
1004 #: GeometryGUI_PartitionDlg.cxx:45
1005 msgid "GEOM_KEEP_OBJECT"
1006 msgstr "Keep Object"
1008 #: GeometryGUI_PartitionDlg.cxx:45
1009 msgid "GEOM_PARTITION_ORIENTATION"
1010 msgstr "Change Orientation"
1012 #: GeometryGUI_PartitionDlg.cxx:45
1013 msgid "SUPPRESS_RESULT"
1014 msgstr "Suppress Result"
1016 msgid "GEOM_REMOVE_WEBS"
1017 msgstr "Remove webs"
1019 msgid "GEOM_SET_MATERIALS"
1020 msgstr "Set materials"
1022 #: OperationGUI_MaterialDlg.cxx:45
1023 msgid "GEOM_MATERIAL_TITLE"
1024 msgstr "Define materials for Dominant Fuse"
1026 msgid "GEOM_MATERIAL_SHAPE"
1029 msgid "GEOM_MATERIAL_MATERIAL"
1032 msgid "GEOM_MATERIAL_ID"
1033 msgstr "Material ID:"
1035 msgid "GEOM_MATERIAL_SET"
1038 #: GeometryGUI_PipeDlg.cxx:47
1039 msgid "GEOM_PIPE_TITLE"
1040 msgstr "Pipe Construction"
1042 #: GeometryGUI_PointDlg.cxx:52
1043 msgid "GEOM_POINT_TITLE"
1044 msgstr "Point Construction"
1046 #: GeometryGUI_PlaneDlg.cxx:60
1047 msgid "GEOM_PLANE_TITLE"
1048 msgstr "Plane Construction"
1050 #: GeometryGUI_PlaneDlg.cxx:172
1051 msgid "GEOM_PLANE_PVC"
1052 msgstr "Point + Coordinate Vector"
1054 #: GeometryGUI_PlaneDlg.cxx:133
1055 msgid "GEOM_PLANE_PV"
1056 msgstr "Point + Vector"
1058 #: GeometryGUI_PrismDlg.cxx:54
1059 msgid "GEOM_EXTRUSION_TITLE"
1060 msgstr "Construction by Extrusion"
1062 #: GeometryGUI_PrismDlg.cxx:83
1063 msgid "GEOM_EXTRUSION_BSV"
1064 msgstr "Base Shape + Vector"
1066 msgid "GEOM_EXTRUSION_BSV_2P"
1067 msgstr "Base Shape + 2 Points"
1069 #: GeometryGUI_PropertiesDlg.cxx:56
1070 msgid "GEOM_PROPERTIES_TITLE"
1071 msgstr "Basic Properties Informations"
1073 #: GeometryGUI_PropertiesDlg.cxx:78
1074 msgid "GEOM_PROPERTIES_CONSTR"
1075 msgstr "Object And Its Properties"
1077 #: GeometryGUI_PropertiesDlg.cxx:114
1078 msgid "GEOM_PROPERTIES_SURFACE"
1079 msgstr "Surface is :"
1081 #: GeometryGUI_PropertiesDlg.cxx:120
1082 msgid "GEOM_PROPERTIES_VOLUME"
1083 msgstr "Volume is :"
1085 #: GeometryGUI_RevolDlg.cxx:49
1086 msgid "GEOM_REVOLUTION_TITLE"
1087 msgstr "Construction By Revolution"
1089 #: GeometryGUI_RotationDlg.cxx:51
1090 msgid "GEOM_ROTATION_TITLE"
1091 msgstr "Rotation Of An Object"
1093 #: GeometryGUI_ScaleDlg.cxx:52
1094 msgid "GEOM_SCALE_TITLE"
1095 msgstr "Scale An Object"
1097 #: GeometryGUI_PositionDlg.cxx:52
1098 msgid "GEOM_POSITION_TITLE"
1099 msgstr "Modify the Location of an Object"
1101 #: GeometryGUI_PositionDlg.cxx:52
1102 msgid "GEOM_START_LCS"
1105 #: GeometryGUI_PositionDlg.cxx:52
1106 msgid "GEOM_END_LCS"
1109 #: GeometryGUI_OffsetDlg.cxx:53
1110 msgid "GEOM_OFFSET_TITLE"
1111 msgstr "Offset Surface"
1113 #: GeometryGUI_ScaleDlg.cxx:117
1114 msgid "GEOM_SCALE_FACTOR"
1115 msgstr "Scale Factor :"
1117 #: GeometryGUI_SectionDlg.cxx:50
1118 msgid "GEOM_SECTION_TITLE"
1119 msgstr "BOOLEAN : Section Of Two Objects"
1121 #: GeometryGUI_SewingDlg.cxx:48
1122 msgid "GEOM_SEWING_TITLE"
1123 msgstr "Topological sewing"
1125 #: GeometryGUI_ShellDlg.cxx:53
1126 msgid "GEOM_SHELL_TITLE"
1127 msgstr "Shell Construction"
1129 #: GeometryGUI_SolidDlg.cxx:74
1130 msgid "GEOM_SOLID_TITLE"
1131 msgstr "Solid Construction"
1133 #: GeometryGUI_SphereDlg.cxx:50
1134 msgid "GEOM_SPHERE_TITLE"
1135 msgstr "Sphere Construction"
1137 #: GeometryGUI_SphereDlg.cxx:113
1138 msgid "GEOM_SPHERE_CR"
1139 msgstr "Center + Radius"
1141 #: GeometryGUI_SphereDlg.cxx:146
1142 msgid "GEOM_SPHERE_RO"
1143 msgstr "Radius At Origin"
1145 #: GeometryGUI_SubShapeDlg.cxx:55
1146 msgid "GEOM_SUBSHAPE_TITLE"
1147 msgstr "Sub Shapes Selection"
1149 #: GeometryGUI_SubShapeDlg.cxx:131
1150 msgid "GEOM_SUBSHAPE_TYPE"
1151 msgstr "Sub Shapes Type :"
1153 #: GeometryGUI_SubShapeDlg.cxx:137
1154 msgid "GEOM_SUBSHAPE_SELECT"
1155 msgstr "Select Sub Shapes"
1157 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1158 msgstr "Please, select one or more sub-shapes"
1160 #: GeometryGUI_TorusDlg.cxx:51
1161 msgid "GEOM_TORUS_TITLE"
1162 msgstr "Torus Construction"
1164 #: GeometryGUI_SuppressFacesDlg.cxx:103
1165 msgid "GEOM_SUPRESSFACE_TITLE"
1166 msgstr "Suppress Faces In An Object"
1168 #: GeometryGUI_SuppressFacesDlg.cxx:164
1169 msgid "GEOM_SUPRESSFACE_SELECT"
1170 msgstr "Select Faces To Suppress"
1172 #: GeometryGUI_TranslationDlg.cxx:78
1173 msgid "GEOM_TRANSLATION_COOR"
1174 msgstr "Translation With Coordinates"
1176 msgid "GEOM_TRANSPARENCY_TITLE"
1177 msgstr "Transparency"
1179 msgid "GEOM_TRANSPARENCY_OPAQUE"
1182 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1183 msgstr "Transparent"
1185 msgid "GEOM_SUPPRESSHOLE_TITLE"
1186 msgstr "Suppress holes"
1188 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1189 msgstr "Select the face with hole"
1191 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1192 msgstr "Select wire on face"
1194 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1195 msgstr "Select end face (if hole traversing)"
1197 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1198 msgstr "Select end wire (if hole traversing)"
1200 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1201 msgstr "Face or shell"
1203 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1204 msgstr "Select hole(s) on the face"
1206 #: GeometryGUI_TranslationDlg.cxx:56
1207 msgid "GEOM_TRANSLATION_TITLE"
1208 msgstr "Translation Of An Object"
1210 #: GeometryGUI_VectorDlg.cxx:54
1211 msgid "GEOM_VECTOR_TITLE"
1212 msgstr "Vector Construction"
1214 #: GeometryGUI_WhatisDlg.cxx:63
1215 msgid "GEOM_WHATIS_TITLE"
1216 msgstr "Whatis Informations"
1218 #: GeometryGUI_WhatisDlg.cxx:86
1219 msgid "GEOM_WHATIS_OBJECT"
1220 msgstr "Object And Its Topological Informations"
1222 #: GeometryGUI_WireDlg.cxx:46
1223 msgid "GEOM_WIRE_TITLE"
1224 msgstr "Create A Wire"
1226 #: GeometryGUI_WireDlg.cxx:103
1227 msgid "GEOM_WIRE_CONNECT"
1228 msgstr "Wire creation from wires/edges connected"
1230 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1231 msgid "GEOM_WPLANE_TITLE"
1232 msgstr "Working Plane Selection"
1234 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1235 msgid "GEOM_WPLANE_FACE"
1236 msgstr "Plane, Planar Face or LCS"
1238 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1239 msgid "GEOM_WPLANE_VECTOR"
1240 msgstr "Select 2 vectors"
1242 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1243 msgid "GEOM_WPLANE_VX"
1246 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1247 msgid "GEOM_WPLANE_VZ"
1250 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1251 msgid "GEOM_WPLANE_ORIGIN"
1252 msgstr "Select a plane"
1254 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1255 msgid "GEOM_WPLANE_OYZ"
1258 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1259 msgid "GEOM_WPLANE_OZX"
1262 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1263 msgid "GEOM_WPLANE_OXY"
1266 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1267 msgid "GEOM_REVERSE_PLANE"
1268 msgstr "Reverse the plane normal"
1270 #: GeometryGUI_multiTranslationDlg.cxx:107
1271 msgid "GEOM_MULTITRANSLATION_TITLE"
1272 msgstr "Multi-Translation"
1274 #: GeometryGUI_multiTranslationDlg.cxx:107
1275 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1276 msgstr "Multi Translation Simple"
1278 #: GeometryGUI_multiTranslationDlg.cxx:107
1279 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1280 msgstr "Multi Translation Double"
1282 #: GeometryGUI_multiRotationDlg.cxx:107
1283 msgid "GEOM_MULTIROTATION_TITLE"
1284 msgstr "Multi-Rotation"
1286 #: GeometryGUI_multiRotationDlg.cxx:107
1287 msgid "GEOM_MULTIROTATION_SIMPLE"
1288 msgstr "Multi Rotation Simple"
1290 #: GeometryGUI_multiRotationDlg.cxx:107
1291 msgid "GEOM_MULTIROTATION_DOUBLE"
1292 msgstr "Multi Rotation Double"
1294 msgid "GEOM_PARAM_POINT"
1295 msgstr "Parametric point"
1297 msgid "GEOM_REF_POINT"
1298 msgstr "Point with reference"
1301 #==============================================================================
1304 #: GeometryGUI.cxx:4613
1305 msgid "GEOM_MEN_WIREFRAME"
1308 #: GeometryGUI.cxx:4613
1309 msgid "GEOM_MEN_SHADING"
1312 msgid "GEOM_RECONSTRUCTION_LIMIT"
1313 msgstr "Reconstruction Limit"
1315 msgid "GEOM_KEEP_NONLIMIT_SHAPES"
1316 msgstr "Keep nonlimit shapes"
1318 msgid "GEOM_SUPPRESS_RESULT"
1319 msgstr "Suppress Result"
1321 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1324 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1327 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1329 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1331 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1333 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1335 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1337 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1339 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1342 msgid "GEOM_SPLINE_TITLE"
1343 msgstr "Spline Construction"
1348 msgid "GEOM_INTERPOL"
1349 msgstr "Interpolation"
1352 #==============================================================================
1355 msgid "GEOM_SKETCHER_EL"
1356 msgstr "Element Type"
1358 msgid "GEOM_BUT_CLOSE_SKETCH"
1359 msgstr "Sketch Closure"
1361 msgid "GEOM_BUT_END_SKETCH"
1362 msgstr "Sketch Validation"
1364 msgid "GEOM_SKETCHER_TITLE"
1365 msgstr "Sketch Construction"
1367 msgid "GEOM_SKETCHER_POINT"
1370 msgid "GEOM_SKETCHER_SEGMENT"
1373 msgid "GEOM_SKETCHER_ARC"
1376 msgid "GEOM_SKETCHER_DIR"
1379 msgid "GEOM_SKETCHER_POINT2"
1382 msgid "GEOM_SKETCHER_DEST"
1383 msgstr "Destination"
1385 msgid "GEOM_SKETCHER_ABS"
1388 msgid "GEOM_SKETCHER_REL"
1391 msgid "GEOM_SKETCHER_SEL"
1394 msgid "GEOM_SKETCHER_ANGLE"
1397 msgid "GEOM_SKETCHER_PER"
1398 msgstr "Perpendicular"
1400 msgid "GEOM_SKETCHER_TAN"
1403 msgid "GEOM_SKETCHER_VXVY"
1406 msgid "GEOM_SKETCHER_LENGTH"
1409 msgid "GEOM_SKETCHER_X"
1412 msgid "GEOM_SKETCHER_Y"
1415 msgid "GEOM_SKETCHER_X2"
1418 msgid "GEOM_SKETCHER_Y2"
1421 msgid "GEOM_SKETCHER_X3"
1424 msgid "GEOM_SKETCHER_Y3"
1427 msgid "GEOM_SKETCHER_DX2"
1430 msgid "GEOM_SKETCHER_DY2"
1433 msgid "GEOM_SKETCHER_VX2"
1436 msgid "GEOM_SKETCHER_VY2"
1439 msgid "GEOM_SKETCHER_LENGTH2"
1442 msgid "GEOM_SKETCHER_ANGLE2"
1445 msgid "GEOM_SKETCHER_RADIUS2"
1448 msgid "GEOM_SKETCHER_UNDO"
1451 msgid "GEOM_SKETCHER_APPLY"
1454 msgid "GEOM_SKETCHER_VALUES"
1457 msgid "GEOM_SKETCHER_TYPE"
1460 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1461 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1463 msgid "GEOM_FILLET_ABORT"
1464 msgstr "Fillet can't be computed with radius %1"
1466 msgid "GEOM_CHAMFER_ABORT"
1467 msgstr "Chamfer can't be computed with %1 and %2"
1469 msgid "GEOM_3_POINTS"
1481 msgid "GEOM_CREATE_COPY"
1482 msgstr "Create a copy"
1484 msgid "GEOM_CREATE_SINGLE_SOLID"
1485 msgstr "Create a single solid"
1490 msgid "GEOM_ERROR_STATUS"
1491 msgstr "Operation status"
1493 msgid "GEOM_ELLIPSE_ERROR_1"
1494 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1499 msgid "GEOM_POLYLINE"
1505 msgid "GEOM_CURVE_TITLE"
1506 msgstr "Curve Construction"
1508 # ShapeProcessDlg.cxx
1509 msgid "GEOM_SHAPEPROCESS_TITLE"
1510 msgstr "Shape Processing"
1515 msgid "GEOM_SELECTED_OBJECTS"
1516 msgstr "Selected objects"
1518 msgid "GEOM_OPERATIONS"
1521 msgid "GEOM_PARAMETERS"
1524 msgid "GEOM_FixShape"
1527 msgid "GEOM_FixFaceSize"
1528 msgstr "FixFaceSize"
1530 msgid "GEOM_DropSmallEdges"
1531 msgstr "DropSmallEdges"
1533 msgid "GEOM_SplitAngle"
1536 msgid "GEOM_SplitClosedFaces"
1537 msgstr "SplitClosedFaces"
1539 msgid "GEOM_SplitContinuity"
1540 msgstr "SplitContinuity"
1542 msgid "GEOM_BSplineRestriction"
1543 msgstr "BSplineRestriction"
1545 msgid "GEOM_ToBezier"
1548 msgid "GEOM_SameParameter"
1549 msgstr "SameParameter"
1551 msgid "GEOM_3D_TOLERANCE"
1552 msgstr "3D tolerance"
1554 msgid "GEOM_MAX_3D_TOLERANCE"
1555 msgstr "Max 3D tolerance"
1557 msgid "GEOM_MAX_TOLERANCE"
1558 msgstr "Max tolerance"
1560 msgid "GEOM_ANGLE_1"
1563 msgid "GEOM_NUM_SPLIT_POINTS"
1564 msgstr "Number of splitting points"
1566 msgid "GEOM_SURFACE_CONTINUTY"
1567 msgstr "Surface continuity"
1569 msgid "GEOM_CURVE_CONTINUTY"
1570 msgstr "Curve continuity"
1572 msgid "GEOM_SURFACE_MODE"
1573 msgstr "Surface mode"
1575 msgid "GEOM_3D_CURVE_MODE"
1576 msgstr "3D curve mode"
1578 msgid "GEOM_2D_CURVE_MODE"
1579 msgstr "2D curve mode"
1581 msgid "GEOM_2D_TOLERANCE"
1582 msgstr "2D tolerance"
1584 msgid "GEOM_REQUIRED_DEGREE"
1585 msgstr "Required degree"
1587 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1588 msgstr "Required number of segments"
1590 msgid "GEOM_3D_CONTINUTY"
1591 msgstr "3D continuity"
1593 msgid "GEOM_2D_CONTINUTY"
1594 msgstr "2D continuity"
1596 msgid "GEOM_CLOSECONTOUR_TITLE"
1597 msgstr "Close contour"
1599 msgid "GEOM_ERR_LIB_NOT_FOUND"
1600 msgstr "GUI library corresponding to the user action can not be found or loaded"
1602 msgid "OperationGUI_ChamferDlg::FACE_1"
1605 msgid "OperationGUI_ChamferDlg::FACE_2"
1608 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1609 msgstr "Selected faces"
1611 msgid "OperationGUI_ChamferDlg::D"
1614 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1615 msgstr "Selected edges"
1617 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1618 msgstr "Selected faces"
1620 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1621 msgstr "Suppress internal wires"
1623 msgid "GEOM_INTERNAL_WIRES"
1624 msgstr "Internal wires"
1626 msgid "GEOM_SELECTED_FACE"
1627 msgstr "Selected face"
1629 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1630 msgstr "Remove all internal wires"
1632 msgid "GEOM_REMOVE_HOLES_TITLE"
1633 msgstr "Suppress holes"
1635 msgid "GEOM_SELECTED_SHAPE"
1636 msgstr "Selected shape"
1638 msgid "GEOM_REMOVE_ALL_HOLES"
1639 msgstr "Remove all holes"
1644 msgid "GEOM_WIRES_TO_REMOVE"
1645 msgstr "Wires to remove"
1650 msgid "GEOM_FREE_BOUNDARIES"
1651 msgstr "Free boundaries"
1653 msgid "GEOM_FREE_FACES"
1656 msgid "GEOM_CHANGE_ORIENTATION_TITLE"
1657 msgstr "Change orientation"
1659 msgid "GEOM_CHANGE_ORIENTATION"
1660 msgstr "Objects to change orientation"
1662 msgid "GEOM_BY_PARAMETER"
1663 msgstr "By parameter"
1665 msgid "GEOM_BY_LENGTH"
1668 msgid "GEOM_DIVIDE_EDGE_TITLE"
1669 msgstr "Addition of point"
1671 msgid "GEOM_ADD_POINT"
1677 msgid "GEOM_MARKER_TITLE"
1678 msgstr "Create marker"
1683 msgid "GEOM_TRIHEDRON"
1686 msgid "GEOM_FREE_BOUNDS_MSG"
1687 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1689 msgid "GEOM_FREE_BOUNDS_ERROR"
1690 msgstr "Object is not selected"
1692 msgid "GEOM_FREE_BOUNDS_TLT"
1693 msgstr "Free boundary detection"
1695 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1696 msgstr "Check free boundaries"
1698 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1699 msgstr "Free boundaries"
1701 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1702 msgstr "Number of closed free boundaries: "
1704 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1705 msgstr "Number of open free boundaries: "
1707 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1708 msgstr "Please, select at least one Shape Process operation to proceed."
1710 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1711 msgstr "Please, select a geometrical object for Shape Processing."
1713 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1714 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1716 msgid "MeasureGUI_PointDlg::POINT"
1719 msgid "MeasureGUI_PointDlg::X"
1722 msgid "MeasureGUI_PointDlg::Y"
1725 msgid "MeasureGUI_PointDlg::Z"
1728 msgid "MeasureGUI_PointDlg::CAPTION"
1729 msgstr "Point Coordinates"
1731 msgid "MeasureGUI_PointDlg::COORDINATES"
1732 msgstr "Point and its coordinates"
1734 msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
1735 msgstr "Check also geometry"
1737 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1738 msgstr "Create Group"
1740 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1743 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1746 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1749 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1750 msgstr "Main Shape And Sub-Shapes"
1752 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1755 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1756 msgstr "Select Sub-Shapes"
1758 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1761 msgid "GroupGUI_GroupDlg::ADD"
1764 msgid "GroupGUI_GroupDlg::REMOVE"
1767 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1770 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1771 msgstr "Please, specify a non-empty group name"
1773 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1774 msgstr "Please, select a main shape"
1776 msgid "GroupGUI_GroupDlg::NO_GROUP"
1777 msgstr "Please, select a group to edit"
1779 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1780 msgstr "Please, select one or more sub-shapes to put into the group"
1782 msgid "GroupGUI::NO_GROUP"
1783 msgstr "Please, select a group to edit"
1790 msgid "WRN_NOT_IMPLEMENTED"
1791 msgstr "Sorry, this functionality is not yet implemented"
1793 ### BlocksGUI_TrsfDlg ###
1795 msgid "BlocksGUI_TrsfDlg::FACE_1"
1798 msgid "BlocksGUI_TrsfDlg::FACE_2"
1801 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1804 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1807 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1810 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1813 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1814 msgstr "Block Multi-Transformation"
1816 msgid "GEOM_BLOCK_MULTITRSF"
1817 msgstr "Block Multi-Transformation"
1819 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1820 msgstr "Multi-Transformation Simple"
1822 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1823 msgstr "Multi-Transformation Double"
1825 ### BlocksGUI_QuadFaceDlg ###
1827 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1830 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1833 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1836 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1839 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1842 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1845 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1848 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1851 msgid "GEOM_QUAD_FACE_TITLE"
1852 msgstr "Quadrangle Face Construction"
1854 msgid "GEOM_QUAD_FACE"
1855 msgstr "Quadrangle Face"
1857 ### BlocksGUI_BlockDlg ###
1859 msgid "BlocksGUI_BlockDlg::FACE_1"
1862 msgid "BlocksGUI_BlockDlg::FACE_2"
1865 msgid "BlocksGUI_BlockDlg::FACE_3"
1868 msgid "BlocksGUI_BlockDlg::FACE_4"
1871 msgid "BlocksGUI_BlockDlg::FACE_5"
1874 msgid "BlocksGUI_BlockDlg::FACE_6"
1877 msgid "GEOM_BLOCK_TITLE"
1878 msgstr "Hexahedral Solid Construction"
1881 msgstr "Hexahedral Solid"
1883 #==============================================================================
1885 msgid "BasicGUI_MarkerDlg::CAPTION"
1886 msgstr "Local CS Construction"
1888 msgid "BasicGUI_MarkerDlg::LOCALCS"
1889 msgstr "Local coordinate system"
1891 msgid "BasicGUI_MarkerDlg::ORIGIN"
1892 msgstr "Coordinates of origin"
1894 msgid "BasicGUI_MarkerDlg::XDIR"
1895 msgstr "X axis direction"
1897 msgid "BasicGUI_MarkerDlg::YDIR"
1898 msgstr "Y axis direction"
1900 msgid "BasicGUI_MarkerDlg::DX"
1903 msgid "BasicGUI_MarkerDlg::DY"
1906 msgid "BasicGUI_MarkerDlg::DZ"
1909 msgid "BasicGUI_MarkerDlg::LCS_NAME"
1912 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
1913 msgstr "Coordinate system axes cannot be parallel"
1945 ### BlocksGUI_ExplodeDlg ###
1947 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
1948 msgstr "Min. nb. faces"
1950 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
1951 msgstr "Max. nb. faces"
1953 msgid "GEOM_BLOCK_EXPLODE_TITLE"
1954 msgstr "Sub Blocks Selection"
1956 msgid "GEOM_BLOCK_EXPLODE"
1959 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
1960 msgstr "There are %1 specified blocks and NO other solids"
1962 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
1963 msgstr "There are %1 specified blocks and some other solids"
1965 msgid "ShHealOper_NotError_msg"
1966 msgstr "Shape Healing algorithm has done no modification of the original shape"
1968 msgid "ShHealOper_InvalidParameters_msg"
1969 msgstr "Incorrect parameters for Shape Healing algorithm"
1971 msgid "ShHealOper_ErrorExecution_msg"
1972 msgstr "Shape Healing algorithm failed"
1974 msgid "GEOM_GLUE_TITLE"
1980 msgid "RepairGUI_GlueDlg::SELECT_FACES"
1981 msgstr "Select Faces"
1983 msgid "RepairGUI_GlueDlg::FACES_FOR_GLUING_ARE_DETECTED"
1984 msgstr "There are %1 face(s) that can be glued. They are coloured on the screen with red colour\nPlease close this message box and select faces for glueing"
1986 msgid "RepairGUI_GlueDlg::GLUE_FACES"
1989 msgid "RepairGUI_GlueDlg::THERE_ARE_NO_FACES_FOR_GLUING"
1990 msgstr "There are no faces for gluing"
1992 msgid "GEOM_FREE_FACES_TITLE"
1995 ### New object names for RepairGUI ###
1996 msgid "SEWING_NEW_OBJ_NAME"
1999 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
2002 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
2003 msgstr "CloseContour"
2005 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
2006 msgstr "SupressHoles"
2008 msgid "GLUE_NEW_OBJ_NAME"
2011 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
2012 msgstr "RemoveIntWires"
2014 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
2015 msgstr "ProcessShape"
2017 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
2018 msgstr "SupressFaces"
2020 msgid "CHANGE_ORIENTATION_NEW_OBJ_NAME"
2023 msgid "NON_GEOM_OBJECTS_SELECTED"
2024 msgstr "There are objects selected which do not belong to %1 component."
2026 msgid "GEOM_PROPAGATE_TITLE"
2029 msgid "GEOM_PROPAGATE"
2032 ### Menu of GEOM module ###
2037 msgstr "Import geometry from BREP file"
2043 msgstr "Import geometry from BREP file"
2046 msgstr "Export geometry to BREP file"
2052 msgstr "Export geometry to BREP file"
2058 msgstr "Delete object"
2064 msgstr "Delete object"
2066 msgid "MEN_NEW_ENTITY"
2073 msgstr "Create a point"
2079 msgstr "Create a point"
2082 msgstr "Create a line"
2088 msgstr "Create a line"
2091 msgstr "Create a circle"
2097 msgstr "Create a circle"
2100 msgstr "Create an ellipse"
2106 msgstr "Create an ellipse"
2109 msgstr "Create an arc"
2115 msgstr "Create an arc"
2118 msgstr "Create a curve"
2124 msgstr "Create a curve"
2127 msgstr "Create a vector"
2133 msgstr "Create a vector"
2136 msgstr "Create a plane"
2142 msgstr "Create a plane"
2144 msgid "TOP_WORK_PLANE"
2145 msgstr "Create a working plane"
2147 msgid "MEN_WORK_PLANE"
2148 msgstr "Working plane"
2150 msgid "STB_WORK_PLANE"
2151 msgstr "Create a working plane"
2153 msgid "TOP_LOCAL_CS"
2154 msgstr "Create a local coordinate system"
2156 msgid "MEN_LOCAL_CS"
2157 msgstr "Local coordinate system"
2159 msgid "STB_LOCAL_CS"
2160 msgstr "Create a local coordinate system"
2162 msgid "MEN_PRIMITIVES"
2166 msgstr "Create a box"
2172 msgstr "Create a box"
2174 msgid "TOP_CYLINDER"
2175 msgstr "Create a cylinder"
2177 msgid "MEN_CYLINDER"
2180 msgid "STB_CYLINDER"
2181 msgstr "Create a cylinder"
2184 msgstr "Create a sphere"
2190 msgstr "Create a sphere"
2193 msgstr "Create a torus"
2199 msgstr "Create a torus"
2202 msgstr "Create a cone"
2208 msgstr "Create a cone"
2210 msgid "MEN_GENERATION"
2213 msgid "TOP_EXTRUSION"
2214 msgstr "Create an extrusion"
2216 msgid "MEN_EXTRUSION"
2219 msgid "STB_EXTRUSION"
2220 msgstr "Create an extrusion"
2222 msgid "TOP_REVOLUTION"
2223 msgstr "Create a revolution"
2225 msgid "MEN_REVOLUTION"
2228 msgid "STB_REVOLUTION"
2229 msgstr "Create a revolution"
2232 msgstr "Create a filling"
2238 msgstr "Create a filling"
2241 msgstr "Extrusion along a path"
2244 msgstr "Extrusion along a path"
2247 msgstr "Create a shape by Extrusion along a path"
2252 msgid "TOP_GROUP_CREATE"
2253 msgstr "Create a group"
2255 msgid "MEN_GROUP_CREATE"
2258 msgid "STB_GROUP_CREATE"
2259 msgstr "Create a group"
2261 msgid "TOP_GROUP_EDIT"
2262 msgstr "Edit a group"
2264 msgid "MEN_GROUP_EDIT"
2267 msgid "STB_GROUP_EDIT"
2268 msgstr "Edit a group"
2274 msgstr "Quadrangle Face"
2277 msgstr "Quadrangle Face"
2280 msgstr "Quadrangle Face"
2282 msgid "TOP_HEX_SOLID"
2283 msgstr "Hexahedral Solid"
2285 msgid "MEN_HEX_SOLID"
2286 msgstr "Hexahedral Solid"
2288 msgid "STB_HEX_SOLID"
2289 msgstr "Hexahedral Solid"
2313 msgstr "Build an edge"
2319 msgstr "Build an edge"
2322 msgstr "Build a wire"
2328 msgstr "Build a wire"
2331 msgstr "Build a face"
2337 msgstr "Build a face"
2340 msgstr "Build a shell"
2346 msgstr "Build a shell"
2349 msgstr "Build a solid"
2355 msgstr "Build a solid"
2357 msgid "TOP_COMPOUND"
2358 msgstr "Build a compound"
2360 msgid "MEN_COMPOUND"
2363 msgid "STB_COMPOUND"
2364 msgstr "Build a compound"
2366 msgid "MEN_OPERATIONS"
2408 msgid "MEN_TRANSFORMATION"
2409 msgstr "Transformation"
2411 msgid "TOP_TRANSLATION"
2412 msgstr "Translation"
2414 msgid "MEN_TRANSLATION"
2415 msgstr "Translation"
2417 msgid "STB_TRANSLATION"
2418 msgstr "Translation"
2420 msgid "TOP_ROTATION"
2423 msgid "MEN_ROTATION"
2426 msgid "STB_ROTATION"
2429 msgid "TOP_MODIFY_LOCATION"
2430 msgstr "Modify the Location"
2432 msgid "MEN_MODIFY_LOCATION"
2433 msgstr "Modify the Location"
2435 msgid "STB_MODIFY_LOCATION"
2436 msgstr "Modify the Location"
2439 msgstr "Mirror image"
2442 msgstr "Mirror image"
2445 msgstr "Mirror image"
2448 msgstr "Scale transform"
2451 msgstr "Scale transform"
2454 msgstr "Scale transform"
2457 msgstr "Offset surface"
2460 msgstr "Offset surface"
2463 msgstr "Offset surface"
2465 msgid "TOP_MUL_TRANSLATION"
2466 msgstr "Multi-Translation"
2468 msgid "MEN_MUL_TRANSLATION"
2469 msgstr "Multi-Translation"
2471 msgid "STB_MUL_TRANSLATION"
2472 msgstr "Multi-Translation"
2474 msgid "TOP_MUL_ROTATION"
2475 msgstr "Multi-Rotation"
2477 msgid "MEN_MUL_ROTATION"
2478 msgstr "Multi-Rotation"
2480 msgid "STB_MUL_ROTATION"
2481 msgstr "Multi-Rotation"
2483 msgid "TOP_PARTITION"
2486 msgid "MEN_PARTITION"
2489 msgid "STB_PARTITION"
2492 msgid "TOP_ARCHIMEDE"
2495 msgid "MEN_ARCHIMEDE"
2498 msgid "STB_ARCHIMEDE"
2519 msgid "TOP_CLIPPING"
2520 msgstr "Clipping range"
2522 msgid "MEN_CLIPPING"
2523 msgstr "Clipping range"
2525 msgid "STB_CLIPPING"
2526 msgstr "Clipping range"
2528 msgid "TOP_MUL_TRANSFORM"
2529 msgstr "Multi-transformation"
2531 msgid "MEN_MUL_TRANSFORM"
2532 msgstr "Multi-transformation"
2534 msgid "STB_MUL_TRANSFORM"
2535 msgstr "Multi-transformation"
2537 msgid "TOP_EXPLODE_BLOCKS"
2538 msgstr "Explode on Blocks"
2540 msgid "MEN_EXPLODE_BLOCKS"
2541 msgstr "Explode on Blocks"
2543 msgid "STB_EXPLODE_BLOCKS"
2544 msgstr "Explode on Blocks"
2546 msgid "TOP_PROPAGATE"
2549 msgid "MEN_PROPAGATE"
2552 msgid "STB_PROPAGATE"
2558 msgid "TOP_SHAPE_PROCESS"
2559 msgstr "Perform shape processing"
2561 msgid "MEN_SHAPE_PROCESS"
2562 msgstr "Shape processing"
2564 msgid "STB_SHAPE_PROCESS"
2565 msgstr "Perform shape processing "
2567 msgid "TOP_SUPPRESS_FACES"
2568 msgstr "Perform suppress faces"
2570 msgid "MEN_SUPPRESS_FACES"
2571 msgstr "Suppress faces"
2573 msgid "STB_SUPPRESS_FACES"
2574 msgstr "Perform suppress faces"
2576 msgid "TOP_CLOSE_CONTOUR"
2577 msgstr "Perform close contour"
2579 msgid "MEN_CLOSE_CONTOUR"
2580 msgstr "Close contour"
2582 msgid "STB_CLOSE_CONTOUR"
2583 msgstr "Perform close contour"
2585 msgid "TOP_SUPPRESS_INT_WIRES"
2586 msgstr "Perform suppress internal wires"
2588 msgid "MEN_SUPPRESS_INT_WIRES"
2589 msgstr "Suppress internal wires"
2591 msgid "STB_SUPPRESS_INT_WIRES"
2592 msgstr "Perform suppress internal wires"
2594 msgid "TOP_SUPPERSS_HOLES"
2595 msgstr "Perform suppress holes"
2597 msgid "MEN_SUPPERSS_HOLES"
2598 msgstr "Suppress holes"
2600 msgid "STB_SUPPERSS_HOLES"
2601 msgstr "Perform suppress holes"
2604 msgstr "Perform sewing"
2610 msgstr "Perform sewing"
2612 msgid "TOP_GLUE_FACES"
2613 msgstr "Perform glue faces"
2615 msgid "MEN_GLUE_FACES"
2618 msgid "STB_GLUE_FACES"
2619 msgstr "Perform glue faces"
2621 msgid "TOP_POINT_ON_EDGE"
2622 msgstr "Add point on edge"
2624 msgid "MEN_POINT_ON_EDGE"
2625 msgstr "Add point on edge"
2627 msgid "STB_POINT_ON_EDGE"
2628 msgstr "Add point on edge"
2630 msgid "TOP_CHECK_FREE_BNDS"
2631 msgstr "Check free boundaries"
2633 msgid "MEN_CHECK_FREE_BNDS"
2634 msgstr "Check free boundaries"
2636 msgid "STB_CHECK_FREE_BNDS"
2637 msgstr "Check free boundaries"
2639 msgid "TOP_CHECK_FREE_FACES"
2640 msgstr "Check free faces"
2642 msgid "MEN_CHECK_FREE_FACES"
2643 msgstr "Check free faces"
2645 msgid "STB_CHECK_FREE_FACES"
2646 msgstr "Check free faces"
2648 msgid "TOP_CHANGE_ORIENTATION"
2649 msgstr "Change orientation"
2651 msgid "MEN_CHANGE_ORIENTATION"
2652 msgstr "Change orientation"
2654 msgid "STB_CHANGE_ORIENTATION"
2655 msgstr "Change orientation"
2657 msgid "MEN_MEASURES"
2660 msgid "TOP_POINT_COORDS"
2661 msgstr "Point coordinates"
2663 msgid "MEN_POINT_COORDS"
2664 msgstr "Point coordinates"
2666 msgid "STB_POINT_COORDS"
2667 msgstr "Point coordinates"
2669 msgid "TOP_BASIC_PROPS"
2670 msgstr "Basic properties"
2672 msgid "MEN_BASIC_PROPS"
2673 msgstr "Basic properties"
2675 msgid "STB_BASIC_PROPS"
2676 msgstr "Basic properties"
2678 msgid "TOP_MASS_CENTER"
2679 msgstr "Compute center of mass"
2681 msgid "MEN_MASS_CENTER"
2682 msgstr "Center of mass"
2684 msgid "STB_MASS_CENTER"
2685 msgstr "Compute center of mass"
2688 msgstr "Compute intertia"
2694 msgstr "Compute intertia"
2696 msgid "MEN_DIMENSIONS"
2700 msgstr "Compute bounding box"
2703 msgstr "Bounding box"
2706 msgstr "Compute bounding box"
2708 msgid "TOP_MIN_DIST"
2709 msgstr "Compute minimum distance"
2711 msgid "MEN_MIN_DIST"
2712 msgstr "Min distance"
2714 msgid "STB_MIN_DIST"
2715 msgstr "Compute minimum distance"
2717 msgid "TOP_TOLERANCE"
2718 msgstr "Compute tolerance"
2720 msgid "MEN_TOLERANCE"
2721 msgstr "Compute tolerance"
2723 msgid "STB_TOLERANCE"
2724 msgstr "Compute tolerance"
2744 msgid "TOP_CHECK_COMPOUND"
2745 msgstr "Check compound of blocks"
2747 msgid "MEN_CHECK_COMPOUND"
2748 msgstr "Check compound of blocks"
2750 msgid "STB_CHECK_COMPOUND"
2751 msgstr "Check compound of blocks"
2756 msgid "TOP_CHECK_GEOMETRY"
2757 msgstr "Check Geometry"
2759 msgid "MEN_CHECK_GEOMETRY"
2760 msgstr "Check Geometry"
2762 msgid "STB_CHECK_GEOMETRY"
2763 msgstr "Check Geometry"
2765 msgid "MEN_PREFERENCES"
2766 msgstr "Preferences"
2768 msgid "MEN_PREFERENCES_GEOM"
2771 msgid "TOP_SHADING_COLOR"
2772 msgstr "Set shading color"
2774 msgid "MEN_SHADING_COLOR"
2775 msgstr "Shading color"
2777 msgid "STB_SHADING_COLOR"
2778 msgstr "Set shading color"
2781 msgstr "Set number of isolines"
2787 msgstr "Set number of isolines"
2789 msgid "TOP_STEP_VALUE"
2790 msgstr "Set step value"
2792 msgid "MEN_STEP_VALUE"
2795 msgid "STB_STEP_VALUE"
2796 msgstr "Set step value"
2801 msgid "MEN_DISPLAY_MODE"
2802 msgstr "Display mode"
2810 msgid "MEN_WIREFRAME"
2816 msgid "TOP_DISPLAY_ALL"
2817 msgstr "Display all"
2819 msgid "MEN_DISPLAY_ALL"
2820 msgstr "Display all"
2822 msgid "STB_DISPLAY_ALL"
2823 msgstr "Display all"
2825 msgid "TOP_ERASE_ALL"
2828 msgid "MEN_ERASE_ALL"
2831 msgid "STB_ERASE_ALL"
2843 msgid "TOP_DISPLAY_ONLY"
2844 msgstr "Display only"
2846 msgid "MEN_DISPLAY_ONLY"
2847 msgstr "Display only"
2849 msgid "STB_DISPLAY_ONLY"
2850 msgstr "Display only"
2861 msgid "TOP_POP_RENAME"
2864 msgid "MEN_POP_RENAME"
2867 msgid "STB_POP_RENAME"
2870 msgid "TOP_POP_WIREFRAME"
2873 msgid "MEN_POP_WIREFRAME"
2876 msgid "STB_POP_WIREFRAME"
2879 msgid "TOP_POP_SHADING"
2882 msgid "MEN_POP_SHADING"
2885 msgid "STB_POP_SHADING"
2888 msgid "TOP_POP_COLOR"
2891 msgid "MEN_POP_COLOR"
2894 msgid "STB_POP_COLOR"
2897 msgid "TOP_POP_TRANSPARENCY"
2898 msgstr "Transparency"
2900 msgid "MEN_POP_TRANSPARENCY"
2901 msgstr "Transparency"
2903 msgid "STB_POP_TRANSPARENCY"
2904 msgstr "Transparency"
2906 msgid "TOP_POP_ISOS"
2909 msgid "MEN_POP_ISOS"
2912 msgid "STB_POP_ISOS"
2915 msgid "TOP_POP_CREATE_GROUP"
2916 msgstr "Create Group"
2918 msgid "MEN_POP_CREATE_GROUP"
2919 msgstr "Create Group"
2921 msgid "STB_POP_CREATE_GROUP"
2922 msgstr "Create Group"
2927 msgid "TOOL_PRIMITIVES"
2930 msgid "TOOL_BOOLEAN"
2931 msgstr "Boolean operations"
2933 msgid "TOOL_GENERATION"
2936 msgid "TOOL_TRANSFORMATION"
2937 msgstr "Transformation"
2945 msgid "GEOM_RESULT_NAME_GRP"
2946 msgstr "Result name"
2948 msgid "GEOM_RESULT_NAME_LBL"
2951 msgid "GEOM_ERR_GET_ENGINE"
2952 msgstr "Failed to obtain GEOM Engine component. Reload Geometry module and try again."
2954 msgid "PREF_GROUP_OCCVIEWER"
2955 msgstr "OCC Viewer 3d"
2957 msgid "PREF_GROUP_GENERAL"
2960 msgid "PREF_GROUP_VERTEX"
2961 msgstr "Marker of Points"
2963 msgid "PREF_SHADING_COLOR"
2964 msgstr "Default shading color"
2966 msgid "PREF_WIREFRAME_COLOR"
2967 msgstr "Default wireframe color"
2969 msgid "PREF_FREE_BOUND_COLOR"
2970 msgstr "Color of free boundaries"
2972 msgid "PREF_LINE_COLOR"
2973 msgstr "Color of edges, vectors, wires"
2975 msgid "PREF_POINT_COLOR"
2976 msgstr "Color of points"
2978 msgid "PREF_ISOS_COLOR"
2979 msgstr "Color of isolines"
2981 msgid "PREF_STEP_VALUE"
2982 msgstr "Step value for spin boxes"
2984 msgid "PREF_DISPLAY_MODE"
2985 msgstr "Default display mode"
2987 msgid "PREF_TAB_SETTINGS"
2990 msgid "PREF_TYPE_OF_MARKER"
2993 msgid "PREF_MARKER_SCALE"
3023 msgid "ERROR_SHAPE_TYPE"
3024 msgstr "Object of incorrect type selected!\nPlease, select face, shell or solid and try again"
3027 msgstr "Selected object has been used to create another one\n It can't be deleted "
3029 msgid "MEN_SELECT_ONLY"
3030 msgstr "Select Only"
3032 msgid "STB_VERTEX_SEL_ONLY"
3033 msgstr "Select only a Points"
3035 msgid "STB_EDGE_SEL_ONLY"
3036 msgstr "Select only a Edges"
3038 msgid "STB_WIRE_SEL_ONLY"
3039 msgstr "Select only a Wires"
3041 msgid "STB_FACE_SEL_ONLY"
3042 msgstr "Select only a Faces"
3044 msgid "STB_SHELL_SEL_ONLY"
3045 msgstr "Select only a Shells"
3047 msgid "STB_SOLID_SEL_ONLY"
3048 msgstr "Select only a Solids"
3050 msgid "STB_COMPOUND_SEL_ONLY"
3051 msgstr "Select only a Compounds"
3053 msgid "STB_ALL_SEL_ONLY"
3054 msgstr "Select all Objects"
3056 msgid "MEN_VERTEX_SEL_ONLY"
3059 msgid "MEN_EDGE_SEL_ONLY"
3062 msgid "MEN_WIRE_SEL_ONLY"
3065 msgid "MEN_FACE_SEL_ONLY"
3068 msgid "MEN_SHELL_SEL_ONLY"
3071 msgid "MEN_SOLID_SEL_ONLY"
3074 msgid "MEN_COMPOUND_SEL_ONLY"
3077 msgid "MEN_ALL_SEL_ONLY"