1 # This is a Qt message file in .po format. Each msgid starts with
2 # a scope. This scope should *NOT* be translated - eg. translating
3 # from French to English, "Foo::Bar" would be translated to "Pub",
7 "Project-Id-Version: PROJECT VERSION\n"
8 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
9 "PO-Revision-Date: 2003-10-27 17:32+0100\n"
10 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
11 "Content-Type: text/plain; charset=iso-8859-1\n"
14 #==============================================================================
18 msgid "GEOM_BUT_APPLY"
22 msgid "GEOM_BUT_CLOSE"
26 msgid "GEOM_BUT_CANCEL"
46 msgid "GEOM_BUT_EXPLODE"
50 #==============================================================================
53 #: GeometryGUI.cxx:563
54 msgid "GEOM_INF_LOADED"
55 msgstr "File %1 loaded."
58 #==============================================================================
61 #: GeometryGUI.cxx:3069
62 msgid "GEOM_PRP_COMMAND"
63 msgstr "No command associated with this id = %1."
65 #: GeometryGUI.cxx:4977
66 msgid "GEOM_PRP_ABORT"
67 msgstr "Operation aborted"
69 #: GeometryGUI.cxx:5058
71 msgstr "Operation done"
73 #: GeometryGUI.cxx:3717
74 msgid "GEOM_PRP_LOADING"
75 msgstr "Loading %1 ..."
77 #: GeometryGUI.cxx:1412
78 msgid "GEOM_PRP_NULLSHAPE"
79 msgstr "Error, null or inappropriate shape !"
81 #: GeometryGUI.cxx:5072
82 msgid "GEOM_PRP_READY"
85 #: GeometryGUI.cxx:1690
86 msgid "GEOM_PRP_SELECT_SUBSHAPES"
87 msgstr "Select Sub Shapes"
90 msgstr "Confirm operation"
92 msgid "GEOM_CONFIRM_INFO"
93 msgstr "Shape contains %1 sub shapes !"
96 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
97 msgstr "Not allowed in VTK viewer"
99 #: GeometryGUI.cxx:1690
100 msgid "GEOM_PRP_SHAPE_IN_STUDY"
101 msgstr "Main shape must be in the study before"
103 #: GeometryGUI.cxx:1690
104 msgid "GEOM_PRP_SELECT_EDGE"
105 msgstr "Select edges and click on Apply"
107 #: GeometryGUI.cxx:1690
108 msgid "GEOM_PRP_SELECT_FACE"
109 msgstr "Select faces to suppress and click on Ok/Apply"
111 #: GeometryGUI.cxx:1690
112 msgid "GEOM_PRP_SELECT_FIRST"
113 msgstr "Select main shape first"
115 #: GeometryGUI.cxx:1690
116 msgid "GEOM_PRP_MIN_DIST"
117 msgstr "Min Distance not computed"
119 msgid "GEOM_STUDY_LOCKED"
120 msgstr "The active study is locked and therefore cannot be modified"
123 #==============================================================================
126 #: GeometryGUI.cxx:3698
127 msgid "GEOM_MEN_ALL_FILES"
128 msgstr "All Files ( * )"
130 #: GeometryGUI.cxx:4389
131 msgid "GEOM_MEN_ANGLE"
134 #: GeometryGUI.cxx:3941
135 msgid "GEOM_MEN_COMPONENT"
138 #: GeometryGUI.cxx:4389
139 msgid "GEOM_MEN_ENTER_ANGLE"
140 msgstr "Enter An Angle In Degrees"
142 #: GeometryGUI.cxx:3758
143 msgid "GEOM_MEN_EXPORT"
146 #: GeometryGUI.cxx:3648
147 msgid "GEOM_MEN_IMPORT"
150 #: GeometryGUI.cxx:3763
151 msgid "GEOM_MEN_LOAD_SCRIPT"
152 msgstr "PYTHON Files ( *.py )"
154 #: GeometryGUI.cxx:2931
155 msgid "GEOM_MEN_ISOS"
156 msgstr "Select Number Of Isos"
158 #: GeometryGUI.cxx:4278
159 msgid "GEOM_MEN_POPUP_NAME"
162 #: GeometryGUI.cxx:4414
163 msgid "GEOM_MEN_SKETCHER_X"
164 msgstr "Enter a length to set X"
166 #: GeometryGUI.cxx:4438
167 msgid "GEOM_MEN_SKETCHER_Y"
168 msgstr "Enter a length to set Y"
170 #: GeometryGUI.cxx:2898
171 msgid "GEOM_MEN_TRANSPARENCY"
172 msgstr "Transparency"
174 #: GeometryGUI.cxx:4413
178 #: GeometryGUI.cxx:4437
182 #: GeometryGUI_NbIsosDlg.cxx:36
183 msgid "GEOM_MEN_ISOU"
186 #: GeometryGUI_NbIsosDlg.cxx:53
187 msgid "GEOM_MEN_ISOV"
190 #: GeometryGUI_TransparencyDlg.cxx:31
191 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
192 msgstr "Transparency :"
194 msgid "GEOM_MEN_STEP_LABEL"
197 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
198 msgstr "Identical names : select by mouse !"
200 msgid "GEOM_NAME_INCORRECT"
201 msgstr "Object name not found"
203 msgid "GEOM_INCORRECT_INPUT"
204 msgstr "Incorrect input data!"
207 #==============================================================================
210 #: GeometryGUI.cxx:892
211 msgid "GEOM_WRN_RADIUS_NULL"
212 msgstr "Radius is null"
214 #: GeometryGUI.cxx:3854
215 msgid "GEOM_WRN_WARNING"
218 #: GeometryGUI.cxx:3854
219 msgid "GEOM_REALLY_DELETE"
220 msgstr "Do you really want to delete object(s) ?"
223 #==============================================================================
231 msgid "GEOM_MAIN_OBJECT"
235 msgid "GEOM_TOOL_OBJECT"
239 msgid "GEOM_BASE_OBJECT"
243 msgid "GEOM_PATH_OBJECT"
251 msgid "GEOM_OBJECT_I"
255 msgid "GEOM_OBJECT_RESULT"
256 msgstr "Object And Result"
263 msgid "GEOM_BASE_POINT"
267 msgid "GEOM_CENTER_POINT"
268 msgstr "Center Point"
271 msgid "GEOM_DIAGONAL_POINTS"
272 msgstr "Diagonal Points"
275 msgid "GEOM_CENTRAL_POINT"
276 msgstr "Central Point"
287 msgid "GEOM_ARGUMENTS"
299 msgid "GEOM_RADIUS_I"
315 msgid "GEOM_COORDINATES"
327 msgid "GEOM_REVERSE_U"
331 msgid "GEOM_REVERSE_V"
347 msgid "GEOM_VECTOR_LENGTH"
348 msgstr "Vector Length :"
351 msgid "GEOM_REVERSE_VECTOR"
352 msgstr "Reverse Vector"
355 msgid "GEOM_POINT_MIRROR"
356 msgstr "Point Mirror"
359 msgid "GEOM_AXE_MIRROR"
363 msgid "GEOM_PLANE_MIRROR"
364 msgstr "Plane Mirror"
367 msgid "GEOM_FACE_SELECTION"
368 msgstr "Face Selection"
375 msgid "GEOM_WATER_DENSITY"
376 msgstr "Water Density :"
379 msgid "GEOM_MESHING_DEFLECTION"
380 msgstr "Meshing Deflect. :"
383 msgid "GEOM_DIMENSIONS"
387 msgid "GEOM_PRECISION"
391 msgid "GEOM_SELECTION"
395 msgid "GEOM_NB_TIMES"
399 msgid "GEOM_NB_TIMES_U"
400 msgstr "Nb. Times U :"
403 msgid "GEOM_NB_TIMES_V"
404 msgstr "Nb. Times V :"
419 #==============================================================================
423 msgid "GEOM_PARTITION"
426 #Half-space partition
427 msgid "GEOM_PARTITION_HALFSPACE"
428 msgstr "Half-space partition"
431 msgid "GEOM_TOLERANCE"
435 msgid "GEOM_ORIENTATION"
443 msgid "GEOM_REVOLUTION"
447 msgid "GEOM_ROTATION"
451 msgid "GEOM_ARCHIMEDE"
463 msgid "GEOM_DISTANCE"
479 msgid "GEOM_POSITION"
495 msgid "GEOM_TRANSLATION"
500 msgstr "Working Plane"
511 msgid "GEOM_SUB_SHAPE"
515 msgid "GEOM_SUPRESSFACE"
516 msgstr "Supress Face"
527 msgid "GEOM_CHECK_SHAPE"
530 #Check Blocks Compound
531 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
532 msgstr "Check Blocks Compound"
534 #Check Blocks Compound Errors
535 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
538 #Check Blocks Compound Errors
539 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
540 msgstr "The Compound of Blocks has no errors"
542 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
543 msgstr "The Compound of Blocks has errors"
545 #Check Blocks Compound SubShapes
546 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
547 msgstr "Incriminated Sub-Shapes"
555 msgstr "Bounding Box"
559 msgstr "Center Of Mass"
562 msgid "GEOM_PROPERTIES"
563 msgstr "Basic Properties"
566 msgid "GEOM_MULTITRANSLATION"
567 msgstr "Multi-Translation"
570 msgid "GEOM_MULTIROTATION"
571 msgstr "Multi-Rotation"
574 #==============================================================================
593 msgid "GEOM_ELLIPSE_TITLE"
594 msgstr "Ellipse Construction"
597 msgid "GEOM_RADIUS_MAJOR"
598 msgstr "Major radius :"
601 msgid "GEOM_RADIUS_MINOR"
602 msgstr "Minor radius :"
605 msgid "GEOM_COMPOUND"
609 msgid "GEOM_COMPOUNDSOLID"
617 msgid "GEOM_CYLINDER"
661 msgid "GEOM_SURFCONE"
662 msgstr "Conical Face"
665 msgid "GEOM_SURFCYLINDER"
666 msgstr "Cylindrical Face"
669 msgid "GEOM_SURFSPHERE"
670 msgstr "Spherical Face"
673 msgid "GEOM_SURFTORUS"
674 msgstr "Toroidal Face"
685 msgid "GEOM_VECTOR_U"
689 msgid "GEOM_VECTOR_V"
709 msgstr "Imported_Shape"
712 msgid "GEOM_PARAMETER"
716 #==============================================================================
760 #==============================================================================
764 msgid "GEOM_STEP_TITLE"
765 msgstr "Step value for GUI constructions"
767 #: GeometryGUI_ArcDlg.cxx:45
768 msgid "GEOM_ARC_TITLE"
769 msgstr "Arc Construction"
771 #: GeometryGUI_ArchimedeDlg.cxx:55
772 msgid "GEOM_ARCHIMEDE_TITLE"
773 msgstr "Archimede Construction"
775 #: GeometryGUI_BndBoxDlg.cxx:59
776 msgid "GEOM_BNDBOX_TITLE"
777 msgstr "Bounding Box Informations"
779 #: GeometryGUI_BndBoxDlg.cxx:82
780 msgid "GEOM_BNDBOX_OBJDIM"
781 msgstr "Object And Its Dimensions"
783 #: GeometryGUI_BoxDlg.cxx:50
784 msgid "GEOM_BOX_TITLE"
785 msgstr "Box Construction"
787 #: GeometryGUI_BoxDlg.cxx:50
789 msgstr "Dimensions At Origin"
791 #: GeometryGUI_ChamferDlg.cxx:58
792 msgid "GEOM_CHAMFER_TITLE"
793 msgstr "Chamfer Construction"
795 #: GeometryGUI_ChamferDlg.cxx:58
796 msgid "GEOM_CHAMFER_ALL"
797 msgstr "Chamfer On Whole Shape"
799 #: GeometryGUI_ChamferDlg.cxx:58
800 msgid "GEOM_CHAMFER_EDGES"
801 msgstr "Chamfer On Edges From Shape"
803 #: GeometryGUI_ChamferDlg.cxx:58
804 msgid "GEOM_CHAMFER_FACES"
805 msgstr "Chamfer On Faces From Shape"
807 #: GeometryGUI_CircleDlg.cxx:48
808 msgid "GEOM_CIRCLE_TITLE"
809 msgstr "Circle Construction"
811 #: GeometryGUI_CenterMassDlg.cxx:77
812 msgid "GEOM_CMASS_TITLE"
813 msgstr "Center Of Mass Construction"
815 msgid "GEOM_PLANE_SIZE"
816 msgstr "Size of plane :"
818 #: GeometryGUI_CommonDlg.cxx:47
819 msgid "GEOM_COMMON_TITLE"
820 msgstr "BOOLEAN : Common Of Two Objects"
822 #: GeometryGUI_CompoundDlg.cxx:44
823 msgid "GEOM_COMPOUND_TITLE"
824 msgstr "Create A Compound"
826 #: GeometryGUI_ConeDlg.cxx:49
827 msgid "GEOM_CONE_TITLE"
828 msgstr "Cone Construction"
830 #: GeometryGUI_CutDlg.cxx:48
831 msgid "GEOM_CUT_TITLE"
832 msgstr "BOOLEAN : Cut Of Two Objects"
834 #: GeometryGUI_CylinderDlg.cxx:47
835 msgid "GEOM_CYLINDER_TITLE"
836 msgstr "Cylinder Construction"
838 #: GeometryGUI_CheckShape.cxx:60
839 msgid "GEOM_CHECK_TITLE"
840 msgstr "Check Shape Informations"
842 #: MeasureGUI_CheckCompoundOfBlocks.cxx:61
843 msgid "GEOM_CHECK_COMPOUND_BLOCKS_TITLE"
844 msgstr "Check Blocks Compound"
846 #: GeometryGUI_CheckShape.cxx:83
847 msgid "GEOM_CHECK_INFOS"
848 msgstr "Object And Its Topological Informations"
850 #: GeometryGUI_DistanceDlg.cxx:57
851 msgid "GEOM_MINDIST_TITLE"
852 msgstr "Minimun Distance Between Two Objects"
854 #: GeometryGUI_DistanceDlg.cxx:57
855 msgid "GEOM_MINDIST_OBJ"
856 msgstr "Objects And Results"
858 #: GeometryGUI_EdgeDlg.cxx:47
859 msgid "GEOM_EDGE_TITLE"
860 msgstr "Create An Edge"
862 #: GeometryGUI_FilletDlg.cxx:58
863 msgid "GEOM_FILLET_TITLE"
864 msgstr "Fillet Construction"
866 #: GeometryGUI_FilletDlg.cxx:58
867 msgid "GEOM_FILLET_ALL"
868 msgstr "Fillet On Whole Shape"
870 #: GeometryGUI_FilletDlg.cxx:58
871 msgid "GEOM_FILLET_EDGES"
872 msgstr "Fillet On Edges From Shape"
874 #: GeometryGUI_FilletDlg.cxx:58
875 msgid "GEOM_FILLET_FACES"
876 msgstr "Fillet On Faces From Shape"
878 #: GeometryGUI_FaceDlg.cxx:49
879 msgid "GEOM_FACE_TITLE"
880 msgstr "Create A Face"
882 #: GeometryGUI_FaceDlg.cxx:78
883 msgid "GEOM_FACE_FFW"
884 msgstr "Face from a wire"
886 #: GeometryGUI_FaceDlg.cxx:103
887 msgid "GEOM_FACE_OPT"
888 msgstr "Try to create a planar face"
890 #: GeometryGUI_FillingDlg.cxx:53
891 msgid "GEOM_FILLING_TITLE"
892 msgstr "Filling Surface With Curves"
894 #: GeometryGUI_FillingDlg.cxx:112
895 msgid "GEOM_FILLING_ARG"
896 msgstr "Arguments And Parameters"
898 #: GeometryGUI_FillingDlg.cxx:128
899 msgid "GEOM_FILLING_MIN_DEG"
902 #: GeometryGUI_FillingDlg.cxx:142
903 msgid "GEOM_FILLING_MAX_DEG"
906 #: GeometryGUI_FillingDlg.cxx:150
907 msgid "GEOM_FILLING_TOL_2D"
910 #: GeometryGUI_FillingDlg.cxx:170
911 msgid "GEOM_FILLING_COMPOUND"
912 msgstr "Curves Comp."
914 #: GeometryGUI_FillingDlg.cxx:184
915 msgid "GEOM_FILLING_TOL_3D"
918 #: GeometryGUI_FillingDlg.cxx:192
919 msgid "GEOM_FILLING_NB_ITER"
922 #: GeometryGUI_FuseDlg.cxx:48
923 msgid "GEOM_FUSE_TITLE"
924 msgstr "BOOLEAN : Fuse Two Objects"
926 #: GeometryGUI_InertiaDlg.cxx:42
927 msgid "GEOM_INERTIA_TITLE"
928 msgstr "Calculs Of Inertia"
930 #: GeometryGUI_InertiaDlg.cxx:50
931 msgid "GEOM_INERTIA_CONSTR"
932 msgstr "Matrix And Moments Of Inertia"
934 #: GeometryGUI_InertiaDlg.cxx:100
935 msgid "GEOM_INERTIA_I"
938 #: GeometryGUI_InertiaDlg.cxx:182
939 msgid "GEOM_INERTIA_IXYZ"
940 msgstr "IX & IY & IZ :"
942 #: GeometryGUI_LineDlg.cxx:50
943 msgid "GEOM_LINE_TITLE"
944 msgstr "Line Construction"
946 #: GeometryGUI_MaxToleranceDlg.cxx:53
947 msgid "GEOM_TOLERANCE_TITLE"
948 msgstr "Maximum Tolerance"
950 #: GeometryGUI_MaxToleranceDlg.cxx:84
951 msgid "GEOM_TOLERANCE_CONSTR"
952 msgstr "Object And Its Tolerances"
954 #: GeometryGUI_MaxToleranceDlg.cxx:121
955 msgid "GEOM_TOLERANCE_FACE"
958 #: GeometryGUI_MaxToleranceDlg.cxx:138
959 msgid "GEOM_TOLERANCE_EDGE"
962 #: GeometryGUI_MaxToleranceDlg.cxx:155
963 msgid "GEOM_TOLERANCE_VERTEX"
966 #: GeometryGUI_MirrorDlg.cxx:52
967 msgid "GEOM_MIRROR_TITLE"
968 msgstr "Mirror An Object"
970 #: GeometryGUI_OrientationDlg.cxx:46
971 msgid "GEOM_ORIENTATION_TITLE"
972 msgstr "Change Orientation"
974 #: GeometryGUI_OrientationDlg.cxx:134
975 msgid "GEOM_ORIENTATION_OPT"
976 msgstr "Reverse orientation with normal vectors simulation"
978 #: GeometryGUI_PartitionDlg.cxx:45
979 msgid "GEOM_PARTITION_TITLE"
980 msgstr "Partition Of Object With Tool"
982 #: GeometryGUI_PartitionDlg.cxx:45
983 msgid "GEOM_KEEP_OBJECT"
986 #: GeometryGUI_PartitionDlg.cxx:45
987 msgid "GEOM_PARTITION_ORIENTATION"
988 msgstr "Change Orientation"
990 #: GeometryGUI_PartitionDlg.cxx:45
991 msgid "SUPPRESS_RESULT"
992 msgstr "Suppress Result"
994 msgid "GEOM_REMOVE_WEBS"
997 msgid "GEOM_SET_MATERIALS"
998 msgstr "Set materials"
1000 #: OperationGUI_MaterialDlg.cxx:45
1001 msgid "GEOM_MATERIAL_TITLE"
1002 msgstr "Define materials for Dominant Fuse"
1004 msgid "GEOM_MATERIAL_SHAPE"
1007 msgid "GEOM_MATERIAL_MATERIAL"
1010 msgid "GEOM_MATERIAL_ID"
1011 msgstr "Material ID:"
1013 msgid "GEOM_MATERIAL_SET"
1016 #: GeometryGUI_PipeDlg.cxx:47
1017 msgid "GEOM_PIPE_TITLE"
1018 msgstr "Pipe Construction"
1020 #: GeometryGUI_PointDlg.cxx:52
1021 msgid "GEOM_POINT_TITLE"
1022 msgstr "Point Construction"
1024 #: GeometryGUI_PlaneDlg.cxx:60
1025 msgid "GEOM_PLANE_TITLE"
1026 msgstr "Plane Construction"
1028 #: GeometryGUI_PlaneDlg.cxx:172
1029 msgid "GEOM_PLANE_PVC"
1030 msgstr "Point + Coordinate Vector"
1032 #: GeometryGUI_PlaneDlg.cxx:133
1033 msgid "GEOM_PLANE_PV"
1034 msgstr "Point + Vector"
1036 #: GeometryGUI_PrismDlg.cxx:54
1037 msgid "GEOM_PRISM_TITLE"
1038 msgstr "Prism Construction"
1040 #: GeometryGUI_PrismDlg.cxx:83
1041 msgid "GEOM_PRISM_BSV"
1042 msgstr "Base Shape + Vector"
1044 #: GeometryGUI_PropertiesDlg.cxx:56
1045 msgid "GEOM_PROPERTIES_TITLE"
1046 msgstr "Basic Properties Informations"
1048 #: GeometryGUI_PropertiesDlg.cxx:78
1049 msgid "GEOM_PROPERTIES_CONSTR"
1050 msgstr "Object And Its Properties"
1052 #: GeometryGUI_PropertiesDlg.cxx:114
1053 msgid "GEOM_PROPERTIES_SURFACE"
1054 msgstr "Surface is :"
1056 #: GeometryGUI_PropertiesDlg.cxx:120
1057 msgid "GEOM_PROPERTIES_VOLUME"
1058 msgstr "Volume is :"
1060 #: GeometryGUI_RevolDlg.cxx:49
1061 msgid "GEOM_REVOLUTION_TITLE"
1062 msgstr "Construction By Revolution"
1064 #: GeometryGUI_RotationDlg.cxx:51
1065 msgid "GEOM_ROTATION_TITLE"
1066 msgstr "Rotation Of An Object"
1068 #: GeometryGUI_ScaleDlg.cxx:52
1069 msgid "GEOM_SCALE_TITLE"
1070 msgstr "Scale An Object"
1072 #: GeometryGUI_PositionDlg.cxx:52
1073 msgid "GEOM_POSITION_TITLE"
1074 msgstr "Modify the Location of an Object"
1076 #: GeometryGUI_PositionDlg.cxx:52
1077 msgid "GEOM_START_LCS"
1080 #: GeometryGUI_PositionDlg.cxx:52
1081 msgid "GEOM_END_LCS"
1084 #: GeometryGUI_OffsetDlg.cxx:53
1085 msgid "GEOM_OFFSET_TITLE"
1086 msgstr "Offset Surface"
1088 #: GeometryGUI_ScaleDlg.cxx:117
1089 msgid "GEOM_SCALE_FACTOR"
1090 msgstr "Scale Factor :"
1092 #: GeometryGUI_SectionDlg.cxx:50
1093 msgid "GEOM_SECTION_TITLE"
1094 msgstr "BOOLEAN : Section Of Two Objects"
1096 #: GeometryGUI_SewingDlg.cxx:48
1097 msgid "GEOM_SEWING_TITLE"
1098 msgstr "Topological sewing"
1100 #: GeometryGUI_ShellDlg.cxx:53
1101 msgid "GEOM_SHELL_TITLE"
1102 msgstr "Shell Construction"
1104 #: GeometryGUI_SolidDlg.cxx:74
1105 msgid "GEOM_SOLID_TITLE"
1106 msgstr "Solid Construction"
1108 #: GeometryGUI_SphereDlg.cxx:50
1109 msgid "GEOM_SPHERE_TITLE"
1110 msgstr "Sphere Construction"
1112 #: GeometryGUI_SphereDlg.cxx:113
1113 msgid "GEOM_SPHERE_CR"
1114 msgstr "Center + Radius"
1116 #: GeometryGUI_SphereDlg.cxx:146
1117 msgid "GEOM_SPHERE_RO"
1118 msgstr "Radius At Origin"
1120 #: GeometryGUI_SubShapeDlg.cxx:55
1121 msgid "GEOM_SUBSHAPE_TITLE"
1122 msgstr "Sub Shapes Selection"
1124 #: GeometryGUI_SubShapeDlg.cxx:131
1125 msgid "GEOM_SUBSHAPE_TYPE"
1126 msgstr "Sub Shapes Type :"
1128 #: GeometryGUI_SubShapeDlg.cxx:137
1129 msgid "GEOM_SUBSHAPE_SELECT"
1130 msgstr "Select Sub Shapes"
1132 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1133 msgstr "Please, select one or more sub-shapes"
1135 #: GeometryGUI_TorusDlg.cxx:51
1136 msgid "GEOM_TORUS_TITLE"
1137 msgstr "Torus Construction"
1139 #: GeometryGUI_SuppressFacesDlg.cxx:103
1140 msgid "GEOM_SUPRESSFACE_TITLE"
1141 msgstr "Suppress Faces In An Object"
1143 #: GeometryGUI_SuppressFacesDlg.cxx:164
1144 msgid "GEOM_SUPRESSFACE_SELECT"
1145 msgstr "Select Faces To Suppress"
1147 #: GeometryGUI_TranslationDlg.cxx:78
1148 msgid "GEOM_TRANSLATION_COOR"
1149 msgstr "Translation With Coordinates"
1151 msgid "GEOM_TRANSPARENCY_TITLE"
1152 msgstr "Transparency"
1154 msgid "GEOM_TRANSPARENCY_OPAQUE"
1157 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1158 msgstr "Transparent"
1160 msgid "GEOM_SUPPRESSHOLE_TITLE"
1161 msgstr "Suppress holes"
1163 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1164 msgstr "Select the face with hole"
1166 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1167 msgstr "Select wire on face"
1169 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1170 msgstr "Select end face (if hole traversing)"
1172 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1173 msgstr "Select end wire (if hole traversing)"
1175 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1176 msgstr "Face or shell"
1178 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1179 msgstr "Select hole(s) on the face"
1181 #: GeometryGUI_TranslationDlg.cxx:56
1182 msgid "GEOM_TRANSLATION_TITLE"
1183 msgstr "Translation Of An Object"
1185 #: GeometryGUI_VectorDlg.cxx:54
1186 msgid "GEOM_VECTOR_TITLE"
1187 msgstr "Vector Construction"
1189 #: GeometryGUI_WhatisDlg.cxx:63
1190 msgid "GEOM_WHATIS_TITLE"
1191 msgstr "Whatis Informations"
1193 #: GeometryGUI_WhatisDlg.cxx:86
1194 msgid "GEOM_WHATIS_OBJECT"
1195 msgstr "Object And Its Topological Informations"
1197 #: GeometryGUI_WireDlg.cxx:46
1198 msgid "GEOM_WIRE_TITLE"
1199 msgstr "Create A Wire"
1201 #: GeometryGUI_WireDlg.cxx:103
1202 msgid "GEOM_WIRE_CONNECT"
1203 msgstr "Wire creation from wires/edges connected"
1205 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1206 msgid "GEOM_WPLANE_TITLE"
1207 msgstr "Working Plane Selection"
1209 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1210 msgid "GEOM_WPLANE_FACE"
1211 msgstr "Plane Or Planar Face"
1213 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1214 msgid "GEOM_WPLANE_VECTOR"
1215 msgstr "Select 2 vectors"
1217 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1218 msgid "GEOM_WPLANE_VX"
1221 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1222 msgid "GEOM_WPLANE_VZ"
1225 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1226 msgid "GEOM_WPLANE_ORIGIN"
1227 msgstr "Select a plane"
1229 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1230 msgid "GEOM_WPLANE_OYZ"
1233 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1234 msgid "GEOM_WPLANE_OZX"
1237 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1238 msgid "GEOM_WPLANE_OXY"
1241 #: GeometryGUI_multiTranslationDlg.cxx:107
1242 msgid "GEOM_MULTITRANSLATION_TITLE"
1243 msgstr "Multi-Translation"
1245 #: GeometryGUI_multiTranslationDlg.cxx:107
1246 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1247 msgstr "Multi Translation Simple"
1249 #: GeometryGUI_multiTranslationDlg.cxx:107
1250 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1251 msgstr "Multi Translation Double"
1253 #: GeometryGUI_multiRotationDlg.cxx:107
1254 msgid "GEOM_MULTIROTATION_TITLE"
1255 msgstr "Multi-Rotation"
1257 #: GeometryGUI_multiRotationDlg.cxx:107
1258 msgid "GEOM_MULTIROTATION_SIMPLE"
1259 msgstr "Multi Rotation Simple"
1261 #: GeometryGUI_multiRotationDlg.cxx:107
1262 msgid "GEOM_MULTIROTATION_DOUBLE"
1263 msgstr "Multi Rotation Double"
1265 msgid "GEOM_PARAM_POINT"
1266 msgstr "Parametric point"
1268 msgid "GEOM_REF_POINT"
1269 msgstr "Point with reference"
1272 #==============================================================================
1275 #: GeometryGUI.cxx:4613
1276 msgid "GEOM_MEN_WIREFRAME"
1279 #: GeometryGUI.cxx:4613
1280 msgid "GEOM_MEN_SHADING"
1283 msgid "GEOM_RECONSTRUCTION_LIMIT"
1284 msgstr "Reconstruction Limit"
1286 msgid "GEOM_SUPPRESS_RESULT"
1287 msgstr "Suppress Result"
1289 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1292 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1295 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1297 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1299 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1301 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1303 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1305 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1307 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1310 msgid "GEOM_SPLINE_TITLE"
1311 msgstr "Spline Construction"
1316 msgid "GEOM_INTERPOL"
1317 msgstr "Interpolation"
1320 #==============================================================================
1323 msgid "GEOM_SKETCHER_EL"
1324 msgstr "Element Type"
1326 msgid "GEOM_BUT_CLOSE_SKETCH"
1327 msgstr "Sketch Closure"
1329 msgid "GEOM_BUT_END_SKETCH"
1330 msgstr "Sketch Validation"
1332 msgid "GEOM_SKETCHER_TITLE"
1333 msgstr "Sketch Construction"
1335 msgid "GEOM_SKETCHER_POINT"
1338 msgid "GEOM_SKETCHER_SEGMENT"
1341 msgid "GEOM_SKETCHER_ARC"
1344 msgid "GEOM_SKETCHER_DIR"
1347 msgid "GEOM_SKETCHER_POINT2"
1350 msgid "GEOM_SKETCHER_DEST"
1351 msgstr "Destination"
1353 msgid "GEOM_SKETCHER_ABS"
1356 msgid "GEOM_SKETCHER_REL"
1359 msgid "GEOM_SKETCHER_SEL"
1362 msgid "GEOM_SKETCHER_ANGLE"
1365 msgid "GEOM_SKETCHER_PER"
1366 msgstr "Perpendicular"
1368 msgid "GEOM_SKETCHER_TAN"
1371 msgid "GEOM_SKETCHER_VXVY"
1374 msgid "GEOM_SKETCHER_LENGTH"
1377 msgid "GEOM_SKETCHER_X"
1380 msgid "GEOM_SKETCHER_Y"
1383 msgid "GEOM_SKETCHER_X2"
1386 msgid "GEOM_SKETCHER_Y2"
1389 msgid "GEOM_SKETCHER_X3"
1392 msgid "GEOM_SKETCHER_Y3"
1395 msgid "GEOM_SKETCHER_DX2"
1398 msgid "GEOM_SKETCHER_DY2"
1401 msgid "GEOM_SKETCHER_VX2"
1404 msgid "GEOM_SKETCHER_VY2"
1407 msgid "GEOM_SKETCHER_LENGTH2"
1410 msgid "GEOM_SKETCHER_ANGLE2"
1413 msgid "GEOM_SKETCHER_RADIUS2"
1416 msgid "GEOM_SKETCHER_UNDO"
1419 msgid "GEOM_SKETCHER_APPLY"
1422 msgid "GEOM_SKETCHER_VALUES"
1425 msgid "GEOM_SKETCHER_TYPE"
1428 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1429 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1431 msgid "GEOM_FILLET_ABORT"
1432 msgstr "Fillet can't be computed with radius %1"
1434 msgid "GEOM_CHAMFER_ABORT"
1435 msgstr "Chamfer can't be computed with %1 and %2"
1437 msgid "GEOM_3_POINTS"
1449 msgid "GEOM_CREATE_COPY"
1450 msgstr "Create a copy"
1452 msgid "GEOM_CREATE_SINGLE_SOLID"
1453 msgstr "Create a single solid"
1458 msgid "GEOM_ERROR_STATUS"
1459 msgstr "Operation status"
1461 msgid "GEOM_ELLIPSE_ERROR_1"
1462 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1467 msgid "GEOM_POLYLINE"
1473 msgid "GEOM_CURVE_TITLE"
1474 msgstr "Curve Construction"
1476 # ShapeProcessDlg.cxx
1477 msgid "GEOM_SHAPEPROCESS_TITLE"
1478 msgstr "Shape Processing"
1483 msgid "GEOM_SELECTED_OBJECTS"
1484 msgstr "Selected objects"
1486 msgid "GEOM_OPERATIONS"
1489 msgid "GEOM_PARAMETERS"
1492 msgid "GEOM_FixShape"
1495 msgid "GEOM_FixFaceSize"
1496 msgstr "FixFaceSize"
1498 msgid "GEOM_DropSmallEdges"
1499 msgstr "DropSmallEdges"
1501 msgid "GEOM_SplitAngle"
1504 msgid "GEOM_SplitClosedFaces"
1505 msgstr "SplitClosedFaces"
1507 msgid "GEOM_SplitContinuity"
1508 msgstr "SplitContinuity"
1510 msgid "GEOM_BSplineRestriction"
1511 msgstr "BSplineRestriction"
1513 msgid "GEOM_ToBezier"
1516 msgid "GEOM_SameParameter"
1517 msgstr "SameParameter"
1519 msgid "GEOM_3D_TOLERANCE"
1520 msgstr "3D tolerance"
1522 msgid "GEOM_MAX_3D_TOLERANCE"
1523 msgstr "Max 3D tolerance"
1525 msgid "GEOM_MAX_TOLERANCE"
1526 msgstr "Max tolerance"
1528 msgid "GEOM_ANGLE_1"
1531 msgid "GEOM_NUM_SPLIT_POINTS"
1532 msgstr "Number of splitting points"
1534 msgid "GEOM_SURFACE_CONTINUTY"
1535 msgstr "Surface continuity"
1537 msgid "GEOM_CURVE_CONTINUTY"
1538 msgstr "Curve continuity"
1540 msgid "GEOM_SURFACE_MODE"
1541 msgstr "Surface mode"
1543 msgid "GEOM_3D_CURVE_MODE"
1544 msgstr "3D curve mode"
1546 msgid "GEOM_2D_CURVE_MODE"
1547 msgstr "2D curve mode"
1549 msgid "GEOM_2D_TOLERANCE"
1550 msgstr "2D tolerance"
1552 msgid "GEOM_REQUIRED_DEGREE"
1553 msgstr "Required degree"
1555 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1556 msgstr "Required number of segments"
1558 msgid "GEOM_3D_CONTINUTY"
1559 msgstr "3D continuity"
1561 msgid "GEOM_2D_CONTINUTY"
1562 msgstr "2D continuity"
1564 msgid "GEOM_CLOSECONTOUR_TITLE"
1565 msgstr "Close contour"
1567 msgid "GEOM_ERR_LIB_NOT_FOUND"
1568 msgstr "GUI library corresponding to the user action can not be found or loaded"
1570 msgid "OperationGUI_ChamferDlg::FACE_1"
1573 msgid "OperationGUI_ChamferDlg::FACE_2"
1576 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1577 msgstr "Selected faces"
1579 msgid "OperationGUI_ChamferDlg::D"
1582 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1583 msgstr "Selected edges"
1585 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1586 msgstr "Selected faces"
1588 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1589 msgstr "Suppress internal wires"
1591 msgid "GEOM_INTERNAL_WIRES"
1592 msgstr "Internal wires"
1594 msgid "GEOM_SELECTED_FACE"
1595 msgstr "Selected face"
1597 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1598 msgstr "Remove all internal wires"
1600 msgid "GEOM_REMOVE_HOLES_TITLE"
1601 msgstr "Suppress holes"
1603 msgid "GEOM_SELECTED_SHAPE"
1604 msgstr "Selected shape"
1606 msgid "GEOM_REMOVE_ALL_HOLES"
1607 msgstr "Remove all holes"
1612 msgid "GEOM_WIRES_TO_REMOVE"
1613 msgstr "Wires to remove"
1618 msgid "GEOM_FREE_BOUNDARIES"
1619 msgstr "Free boundaries"
1621 msgid "GEOM_FREE_FACES"
1624 msgid "GEOM_BY_PARAMETER"
1625 msgstr "By parameter"
1627 msgid "GEOM_BY_LENGTH"
1630 msgid "GEOM_DIVIDE_EDGE_TITLE"
1631 msgstr "Addition of point"
1633 msgid "GEOM_ADD_POINT"
1639 msgid "GEOM_MARKER_TITLE"
1640 msgstr "Create marker"
1645 msgid "GEOM_TRIHEDRON"
1648 msgid "GEOM_FREE_BOUNDS_MSG"
1649 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1651 msgid "GEOM_FREE_BOUNDS_ERROR"
1652 msgstr "Object is not selected"
1654 msgid "GEOM_FREE_BOUNDS_TLT"
1655 msgstr "Free boundary detection"
1657 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1658 msgstr "Check free boundaries"
1660 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1661 msgstr "Free boundaries"
1663 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1664 msgstr "Number of closed free boundaries: "
1666 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1667 msgstr "Number of open free boundaries: "
1669 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1670 msgstr "Please, select at least one Shape Process operation to proceed."
1672 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1673 msgstr "Please, select a geometrical object for Shape Processing."
1675 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1676 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1678 msgid "MeasureGUI_PointDlg::POINT"
1681 msgid "MeasureGUI_PointDlg::X"
1684 msgid "MeasureGUI_PointDlg::Y"
1687 msgid "MeasureGUI_PointDlg::Z"
1690 msgid "MeasureGUI_PointDlg::CAPTION"
1691 msgstr "Point Coordinates"
1693 msgid "MeasureGUI_PointDlg::COORDINATES"
1694 msgstr "Point and its coordinates"
1696 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1697 msgstr "Create Group"
1699 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1702 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1705 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1708 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1709 msgstr "Main Shape And Sub-Shapes"
1711 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1714 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1715 msgstr "Select Sub-Shapes"
1717 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1720 msgid "GroupGUI_GroupDlg::ADD"
1723 msgid "GroupGUI_GroupDlg::REMOVE"
1726 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1729 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1730 msgstr "Please, specify a non-empty group name"
1732 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1733 msgstr "Please, select a main shape"
1735 msgid "GroupGUI_GroupDlg::NO_GROUP"
1736 msgstr "Please, select a group to edit"
1738 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1739 msgstr "Please, select one or more sub-shapes to put into the group"
1741 msgid "GroupGUI::NO_GROUP"
1742 msgstr "Please, select a group to edit"
1749 msgid "WRN_NOT_IMPLEMENTED"
1750 msgstr "Sorry, this functionality is not yet implemented"
1752 ### BlocksGUI_TrsfDlg ###
1754 msgid "BlocksGUI_TrsfDlg::FACE_1"
1757 msgid "BlocksGUI_TrsfDlg::FACE_2"
1760 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1763 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1766 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1769 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1772 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1773 msgstr "Block Multi-Transformation"
1775 msgid "GEOM_BLOCK_MULTITRSF"
1776 msgstr "Block Multi-Transformation"
1778 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1779 msgstr "Multi-Transformation Simple"
1781 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1782 msgstr "Multi-Transformation Double"
1784 ### BlocksGUI_QuadFaceDlg ###
1786 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1789 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1792 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1795 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1798 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1801 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1804 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1807 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1810 msgid "GEOM_QUAD_FACE_TITLE"
1811 msgstr "Quadrangle Face Construction"
1813 msgid "GEOM_QUAD_FACE"
1814 msgstr "Quadrangle Face"
1816 ### BlocksGUI_BlockDlg ###
1818 msgid "BlocksGUI_BlockDlg::FACE_1"
1821 msgid "BlocksGUI_BlockDlg::FACE_2"
1824 msgid "BlocksGUI_BlockDlg::FACE_3"
1827 msgid "BlocksGUI_BlockDlg::FACE_4"
1830 msgid "BlocksGUI_BlockDlg::FACE_5"
1833 msgid "BlocksGUI_BlockDlg::FACE_6"
1836 msgid "GEOM_BLOCK_TITLE"
1837 msgstr "Hexahedral Solid Construction"
1840 msgstr "Hexahedral Solid"
1842 #==============================================================================
1844 msgid "BasicGUI_MarkerDlg::CAPTION"
1845 msgstr "Local CS Construction"
1847 msgid "BasicGUI_MarkerDlg::LOCALCS"
1848 msgstr "Local coordinate system"
1850 msgid "BasicGUI_MarkerDlg::ORIGIN"
1851 msgstr "Coordinates of origin"
1853 msgid "BasicGUI_MarkerDlg::XDIR"
1854 msgstr "X axis direction"
1856 msgid "BasicGUI_MarkerDlg::YDIR"
1857 msgstr "Y axis direction"
1859 msgid "BasicGUI_MarkerDlg::DX"
1862 msgid "BasicGUI_MarkerDlg::DY"
1865 msgid "BasicGUI_MarkerDlg::DZ"
1868 msgid "BasicGUI_MarkerDlg::LCS_NAME"
1871 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
1872 msgstr "Coordinate system axes cannot be parallel"
1904 ### BlocksGUI_ExplodeDlg ###
1906 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
1907 msgstr "Min. nb. faces"
1909 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
1910 msgstr "Max. nb. faces"
1912 msgid "GEOM_BLOCK_EXPLODE_TITLE"
1913 msgstr "Sub Blocks Selection"
1915 msgid "GEOM_BLOCK_EXPLODE"
1918 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
1919 msgstr "There are %1 specified blocks and NO other solids"
1921 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
1922 msgstr "There are %1 specified blocks and some other solids"
1924 msgid "ShHealOper_NotError_msg"
1925 msgstr "Shape Healing algorithm has done no modification of the original shape"
1927 msgid "ShHealOper_InvalidParameters_msg"
1928 msgstr "Incorrect parameters for Shape Healing algorithm"
1930 msgid "ShHealOper_ErrorExecution_msg"
1931 msgstr "Shape Healing algorithm failed"
1933 msgid "GEOM_GLUE_TITLE"
1939 msgid "GEOM_FREE_FACES_TITLE"
1942 ### New object names for RepairGUI ###
1943 msgid "SEWING_NEW_OBJ_NAME"
1946 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
1949 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
1950 msgstr "CloseContour"
1952 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
1953 msgstr "SupressHoles"
1955 msgid "GLUE_NEW_OBJ_NAME"
1958 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
1959 msgstr "RemoveIntWires"
1961 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
1962 msgstr "ProcessShape"
1964 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
1965 msgstr "SupressFaces"
1967 msgid "NON_GEOM_OBJECTS_SELECTED"
1968 msgstr "There are objects selected which do not belong to %1 component."
1970 msgid "GEOM_PROPAGATE_TITLE"
1973 msgid "GEOM_PROPAGATE"