1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: 2003-10-27 17:32+0100\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
65 msgid "GEOM_BUT_EXPLODE"
68 #NOT_FOUND_ANY error from some operations
70 msgstr "Not a single entity has been found"
73 #==============================================================================
76 #: GeometryGUI.cxx:563
77 msgid "GEOM_INF_LOADED"
78 msgstr "File %1 loaded."
81 #==============================================================================
84 #: GeometryGUI.cxx:3069
85 msgid "GEOM_PRP_COMMAND"
86 msgstr "No command associated with this id = %1."
88 #: GeometryGUI.cxx:4977
89 msgid "GEOM_PRP_ABORT"
90 msgstr "Operation aborted"
92 #: GeometryGUI.cxx:5058
94 msgstr "Operation done"
96 #: GeometryGUI.cxx:3717
97 msgid "GEOM_PRP_LOADING"
98 msgstr "Loading %1 ..."
100 #: GeometryGUI.cxx:1412
101 msgid "GEOM_PRP_NULLSHAPE"
102 msgstr "Error, null or inappropriate shape !"
104 #: GeometryGUI.cxx:5072
105 msgid "GEOM_PRP_READY"
108 #: GeometryGUI.cxx:1690
109 msgid "GEOM_PRP_SELECT_SUBSHAPES"
110 msgstr "Select Sub Shapes"
112 msgid "GEOM_PRP_EXPORT"
113 msgstr "Exporting geometry to %1 ..."
116 msgstr "Confirm operation"
118 msgid "GEOM_CONFIRM_INFO"
119 msgstr "Shape contains %1 sub shapes !"
122 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
123 msgstr "Not allowed in VTK viewer"
125 #: GeometryGUI.cxx:1690
126 msgid "GEOM_PRP_SHAPE_IN_STUDY"
127 msgstr "Main shape must be in the study before"
129 #: GeometryGUI.cxx:1690
130 msgid "GEOM_PRP_SELECT_EDGE"
131 msgstr "Select edges and click on Apply"
133 #: GeometryGUI.cxx:1690
134 msgid "GEOM_PRP_SELECT_FACE"
135 msgstr "Select faces to suppress and click on Ok/Apply"
137 #: GeometryGUI.cxx:1690
138 msgid "GEOM_PRP_SELECT_FIRST"
139 msgstr "Select main shape first"
141 #: GeometryGUI.cxx:1690
142 msgid "GEOM_PRP_MIN_DIST"
143 msgstr "Min Distance not computed"
145 msgid "GEOM_STUDY_LOCKED"
146 msgstr "The active study is locked and therefore cannot be modified"
149 #==============================================================================
152 #: GeometryGUI.cxx:3698
153 msgid "GEOM_MEN_ALL_FILES"
154 msgstr "All Files ( * )"
156 #: GeometryGUI.cxx:4389
157 msgid "GEOM_MEN_ANGLE"
160 #: GeometryGUI.cxx:3941
161 msgid "GEOM_MEN_COMPONENT"
164 #: GeometryGUI.cxx:4389
165 msgid "GEOM_MEN_ENTER_ANGLE"
166 msgstr "Enter An Angle In Degrees"
168 #: GeometryGUI.cxx:3758
169 msgid "GEOM_MEN_EXPORT"
172 #: GeometryGUI.cxx:3648
173 msgid "GEOM_MEN_IMPORT"
176 #: GeometryGUI.cxx:2931
177 msgid "GEOM_MEN_ISOS"
178 msgstr "Select Number Of Isos"
180 #: GeometryGUI.cxx:4278
181 msgid "GEOM_MEN_POPUP_NAME"
184 #: GeometryGUI.cxx:4414
185 msgid "GEOM_MEN_SKETCHER_X"
186 msgstr "Enter a length to set X"
188 #: GeometryGUI.cxx:4438
189 msgid "GEOM_MEN_SKETCHER_Y"
190 msgstr "Enter a length to set Y"
192 #: GeometryGUI.cxx:2898
193 msgid "GEOM_MEN_TRANSPARENCY"
194 msgstr "Transparency"
196 #: GeometryGUI.cxx:4413
200 #: GeometryGUI.cxx:4437
204 #: GeometryGUI_NbIsosDlg.cxx:36
205 msgid "GEOM_MEN_ISOU"
208 #: GeometryGUI_NbIsosDlg.cxx:53
209 msgid "GEOM_MEN_ISOV"
212 #: GeometryGUI_TransparencyDlg.cxx:31
213 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
214 msgstr "Transparency :"
216 msgid "GEOM_MEN_STEP_LABEL"
219 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
220 msgstr "Identical names : select by mouse !"
222 msgid "GEOM_NAME_INCORRECT"
223 msgstr "Object name not found"
225 msgid "GEOM_INCORRECT_INPUT"
226 msgstr "Incorrect input data!"
229 #==============================================================================
232 #: GeometryGUI.cxx:892
233 msgid "GEOM_WRN_RADIUS_NULL"
234 msgstr "Radius is null"
236 #: GeometryGUI.cxx:3854
237 msgid "GEOM_WRN_WARNING"
240 #: GeometryGUI.cxx:3854
241 msgid "GEOM_REALLY_DELETE"
242 msgstr "Do you really want to delete this %1 object(s):"
245 #==============================================================================
253 msgid "GEOM_MAIN_OBJECT"
257 msgid "GEOM_TOOL_OBJECT"
261 msgid "GEOM_BASE_OBJECT"
265 msgid "GEOM_PATH_OBJECT"
273 msgid "GEOM_OBJECT_I"
277 msgid "GEOM_OBJECT_RESULT"
278 msgstr "Object And Result"
285 msgid "GEOM_BASE_POINT"
289 msgid "GEOM_CENTER_POINT"
290 msgstr "Center Point"
293 msgid "GEOM_DIAGONAL_POINTS"
294 msgstr "Diagonal Points"
297 msgid "GEOM_CENTRAL_POINT"
298 msgstr "Central Point"
313 msgid "GEOM_ARGUMENTS"
325 msgid "GEOM_CONSTANT_RADIUS"
337 msgid "GEOM_RADIUS_I"
353 msgid "GEOM_COORDINATES"
366 msgstr "Both Directions"
369 msgid "GEOM_REVERSE_U"
373 msgid "GEOM_REVERSE_V"
389 msgid "GEOM_VECTOR_LENGTH"
390 msgstr "Vector Length :"
393 msgid "GEOM_REVERSE_VECTOR"
394 msgstr "Reverse Vector"
397 msgid "GEOM_POINT_MIRROR"
398 msgstr "Point Mirror"
401 msgid "GEOM_AXE_MIRROR"
405 msgid "GEOM_PLANE_MIRROR"
406 msgstr "Plane Mirror"
409 msgid "GEOM_FACE_SELECTION"
410 msgstr "Face Selection"
417 msgid "GEOM_WATER_DENSITY"
418 msgstr "Water Density :"
421 msgid "GEOM_MESHING_DEFLECTION"
422 msgstr "Meshing Deflect. :"
425 msgid "GEOM_DIMENSIONS"
429 msgid "GEOM_PRECISION"
433 msgid "GEOM_SELECTION"
437 msgid "GEOM_NB_TIMES"
441 msgid "GEOM_NB_TIMES_U"
442 msgstr "Nb. Times U :"
445 msgid "GEOM_NB_TIMES_V"
446 msgstr "Nb. Times V :"
461 #==============================================================================
465 msgid "GEOM_PARTITION"
468 #Half-space partition
469 msgid "GEOM_PARTITION_HALFSPACE"
470 msgstr "Half-space partition"
473 msgid "GEOM_TOLERANCE"
477 msgid "GEOM_ORIENTATION"
485 msgid "GEOM_REVOLUTION"
489 msgid "GEOM_ROTATION"
493 msgid "GEOM_ARCHIMEDE"
505 msgid "GEOM_DISTANCE"
521 msgid "GEOM_POSITION"
537 msgid "GEOM_TRANSLATION"
542 msgstr "Working Plane"
549 msgid "GEOM_EXTRUSION"
553 msgid "GEOM_SUB_SHAPE"
557 msgid "GEOM_SUPRESSFACE"
558 msgstr "Supress Face"
569 msgid "GEOM_CHECK_SHAPE"
572 #Check Blocks Compound
573 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
574 msgstr "Check and Improve Blocks Compound"
576 #Check Blocks Compound Errors
577 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
580 #Check Blocks Compound Errors
581 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
582 msgstr "The Compound of Blocks has no errors"
584 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
585 msgstr "The Compound of Blocks has errors"
587 #Check Blocks Compound SubShapes
588 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
589 msgstr "Incriminated Sub-Shapes"
597 msgstr "Bounding Box"
601 msgstr "Center Of Mass"
605 msgstr "Normal To A Face"
607 msgid "GEOM_VECTOR_NORMALE"
608 msgstr "Vector_Normal"
611 msgid "GEOM_PROPERTIES"
612 msgstr "Basic Properties"
615 msgid "GEOM_MULTITRANSLATION"
616 msgstr "Multi-Translation"
619 msgid "GEOM_MULTIROTATION"
620 msgstr "Multi-Rotation"
623 #==============================================================================
642 msgid "GEOM_ELLIPSE_TITLE"
643 msgstr "Ellipse Construction"
646 msgid "GEOM_RADIUS_MAJOR"
647 msgstr "Major radius :"
650 msgid "GEOM_RADIUS_MINOR"
651 msgstr "Minor radius :"
654 msgid "GEOM_COMPOUND"
658 msgid "GEOM_BLOCKS_COMPOUND"
659 msgstr "BlocksCompound"
662 msgid "GEOM_COMPOUNDSOLID"
670 msgid "GEOM_CYLINDER"
686 msgid "GEOM_FACE_OR_LCS"
726 msgid "GEOM_SURFCONE"
727 msgstr "Conical Face"
730 msgid "GEOM_SURFCYLINDER"
731 msgstr "Cylindrical Face"
734 msgid "GEOM_SURFSPHERE"
735 msgstr "Spherical Face"
738 msgid "GEOM_SURFTORUS"
739 msgstr "Toroidal Face"
750 msgid "GEOM_VECTOR_U"
754 msgid "GEOM_VECTOR_V"
774 msgstr "Imported_Shape"
777 msgid "GEOM_PARAMETER"
781 #==============================================================================
829 #==============================================================================
833 msgid "GEOM_STEP_TITLE"
834 msgstr "Step value for GUI constructions"
836 #: GeometryGUI_ArcDlg.cxx:45
837 msgid "GEOM_ARC_TITLE"
838 msgstr "Arc Construction"
840 #: GeometryGUI_ArchimedeDlg.cxx:55
841 msgid "GEOM_ARCHIMEDE_TITLE"
842 msgstr "Archimede Construction"
844 #: GeometryGUI_BndBoxDlg.cxx:59
845 msgid "GEOM_BNDBOX_TITLE"
846 msgstr "Bounding Box Informations"
848 #: GeometryGUI_BndBoxDlg.cxx:82
849 msgid "GEOM_BNDBOX_OBJDIM"
850 msgstr "Object And Its Dimensions"
852 #: GeometryGUI_BoxDlg.cxx:50
853 msgid "GEOM_BOX_TITLE"
854 msgstr "Box Construction"
856 #: GeometryGUI_BoxDlg.cxx:50
858 msgstr "Dimensions At Origin"
860 #: GeometryGUI_ChamferDlg.cxx:58
861 msgid "GEOM_CHAMFER_TITLE"
862 msgstr "Chamfer Construction"
864 #: GeometryGUI_ChamferDlg.cxx:58
865 msgid "GEOM_CHAMFER_ALL"
866 msgstr "Chamfer On Whole Shape"
868 #: GeometryGUI_ChamferDlg.cxx:58
869 msgid "GEOM_CHAMFER_EDGES"
870 msgstr "Chamfer On Edges From Shape"
872 #: GeometryGUI_ChamferDlg.cxx:58
873 msgid "GEOM_CHAMFER_EDGE"
874 msgstr "Chamfer On Selected Edges"
876 #: GeometryGUI_ChamferDlg.cxx:58
877 msgid "SELECTED_EDGE"
878 msgstr "Selected Edges"
880 #: GeometryGUI_ChamferDlg.cxx:58
881 msgid "GEOM_CHAMFER_FACES"
882 msgstr "Chamfer On Faces From Shape"
884 #: GeometryGUI_CircleDlg.cxx:48
885 msgid "GEOM_CIRCLE_TITLE"
886 msgstr "Circle Construction"
888 #: GeometryGUI_CenterMassDlg.cxx:77
889 msgid "GEOM_CMASS_TITLE"
890 msgstr "Center Of Mass Construction"
892 #: GeometryGUI_NormaleDlg.cxx:57
893 msgid "GEOM_NORMALE_TITLE"
894 msgstr "Create Normal To A Face"
896 msgid "GEOM_PLANE_SIZE"
897 msgstr "Size of plane :"
899 #: GeometryGUI_CommonDlg.cxx:47
900 msgid "GEOM_COMMON_TITLE"
901 msgstr "BOOLEAN : Common Of Two Objects"
903 #: GeometryGUI_CompoundDlg.cxx:44
904 msgid "GEOM_COMPOUND_TITLE"
905 msgstr "Create A Compound"
907 #: GeometryGUI_ConeDlg.cxx:49
908 msgid "GEOM_CONE_TITLE"
909 msgstr "Cone Construction"
911 #: GeometryGUI_CutDlg.cxx:48
912 msgid "GEOM_CUT_TITLE"
913 msgstr "BOOLEAN : Cut Of Two Objects"
915 #: GeometryGUI_CylinderDlg.cxx:47
916 msgid "GEOM_CYLINDER_TITLE"
917 msgstr "Cylinder Construction"
919 #: GeometryGUI_CheckShape.cxx:60
920 msgid "GEOM_CHECK_TITLE"
921 msgstr "Check Shape Informations"
923 #: GeometryGUI_CheckShape.cxx:83
924 msgid "GEOM_CHECK_INFOS"
925 msgstr "Object And Its Topological Informations"
927 #: GeometryGUI_DistanceDlg.cxx:57
928 msgid "GEOM_MINDIST_TITLE"
929 msgstr "Minimun Distance Between Two Objects"
931 #: GeometryGUI_DistanceDlg.cxx:57
932 msgid "GEOM_MINDIST_OBJ"
933 msgstr "Objects And Results"
935 #: GeometryGUI_AngleDlg.cxx:82
936 msgid "GEOM_MEASURE_ANGLE_TITLE"
937 msgstr "Angle Between Two Straight Edges/Lines/Vectors"
939 #: GeometryGUI_AngleDlg.cxx:86
940 msgid "GEOM_MEASURE_ANGLE_ANGLE"
943 #: GeometryGUI_AngleDlg.cxx:90
944 msgid "GEOM_MEASURE_ANGLE_OBJ"
945 msgstr "Objects And Results"
947 #: GeometryGUI_AngleDlg.cxx:93
948 msgid "GEOM_MEASURE_ANGLE_IS"
949 msgstr "Angle in degrees :"
951 #: GeometryGUI_EdgeDlg.cxx:47
952 msgid "GEOM_EDGE_TITLE"
953 msgstr "Create An Edge"
955 #: GeometryGUI_FilletDlg.cxx:58
956 msgid "GEOM_FILLET_TITLE"
957 msgstr "Fillet Construction"
959 #: GeometryGUI_FilletDlg.cxx:58
960 msgid "GEOM_FILLET_ALL"
961 msgstr "Fillet On Whole Shape"
963 #: GeometryGUI_FilletDlg.cxx:58
964 msgid "GEOM_FILLET_EDGES"
965 msgstr "Fillet On Edges From Shape"
967 #: GeometryGUI_FilletDlg.cxx:58
968 msgid "GEOM_FILLET_FACES"
969 msgstr "Fillet On Faces From Shape"
971 #: GeometryGUI_FaceDlg.cxx:49
972 msgid "GEOM_FACE_TITLE"
973 msgstr "Create A Face"
975 #: GeometryGUI_FaceDlg.cxx:78
976 msgid "GEOM_FACE_FFW"
977 msgstr "Face creation from wires and/or edges"
979 #: GeometryGUI_FaceDlg.cxx:103
980 msgid "GEOM_FACE_OPT"
981 msgstr "Try to create a planar face"
983 #: GeometryGUI_FillingDlg.cxx:53
984 msgid "GEOM_FILLING_TITLE"
985 msgstr "Filling Surface With Edges"
987 #: GeometryGUI_FillingDlg.cxx:112
988 msgid "GEOM_FILLING_ARG"
989 msgstr "Arguments And Parameters"
991 #: GeometryGUI_FillingDlg.cxx:128
992 msgid "GEOM_FILLING_MIN_DEG"
995 #: GeometryGUI_FillingDlg.cxx:142
996 msgid "GEOM_FILLING_MAX_DEG"
999 #: GeometryGUI_FillingDlg.cxx:150
1000 msgid "GEOM_FILLING_TOL_2D"
1003 #: GeometryGUI_FillingDlg.cxx:170
1004 msgid "GEOM_FILLING_COMPOUND"
1005 msgstr "Edges compound"
1007 #: GeometryGUI_FillingDlg.cxx:184
1008 msgid "GEOM_FILLING_TOL_3D"
1011 #: GeometryGUI_FillingDlg.cxx:192
1012 msgid "GEOM_FILLING_NB_ITER"
1015 #: GeometryGUI_FillingDlg.cxx:84
1016 msgid "GEOM_FILLING_APPROX"
1017 msgstr "Approximation"
1019 #: GeometryGUI_FuseDlg.cxx:48
1020 msgid "GEOM_FUSE_TITLE"
1021 msgstr "BOOLEAN : Fuse Two Objects"
1023 #: GeometryGUI_InertiaDlg.cxx:42
1024 msgid "GEOM_INERTIA_TITLE"
1025 msgstr "Calculs Of Inertia"
1027 #: GeometryGUI_InertiaDlg.cxx:50
1028 msgid "GEOM_INERTIA_CONSTR"
1029 msgstr "Matrix And Moments Of Inertia"
1031 #: GeometryGUI_InertiaDlg.cxx:100
1032 msgid "GEOM_INERTIA_I"
1035 #: GeometryGUI_InertiaDlg.cxx:182
1036 msgid "GEOM_INERTIA_IXYZ"
1037 msgstr "IX & IY & IZ :"
1039 #: GeometryGUI_LineDlg.cxx:50
1040 msgid "GEOM_LINE_TITLE"
1041 msgstr "Line Construction"
1043 #: GeometryGUI_MaxToleranceDlg.cxx:53
1044 msgid "GEOM_TOLERANCE_TITLE"
1045 msgstr "Maximum Tolerance"
1047 #: GeometryGUI_MaxToleranceDlg.cxx:84
1048 msgid "GEOM_TOLERANCE_CONSTR"
1049 msgstr "Object And Its Tolerances"
1051 #: GeometryGUI_MaxToleranceDlg.cxx:121
1052 msgid "GEOM_TOLERANCE_FACE"
1055 #: GeometryGUI_MaxToleranceDlg.cxx:138
1056 msgid "GEOM_TOLERANCE_EDGE"
1059 #: GeometryGUI_MaxToleranceDlg.cxx:155
1060 msgid "GEOM_TOLERANCE_VERTEX"
1063 #: GeometryGUI_MirrorDlg.cxx:52
1064 msgid "GEOM_MIRROR_TITLE"
1065 msgstr "Mirror An Object"
1067 #: GeometryGUI_OrientationDlg.cxx:46
1068 msgid "GEOM_ORIENTATION_TITLE"
1069 msgstr "Change Orientation"
1071 #: GeometryGUI_OrientationDlg.cxx:134
1072 msgid "GEOM_ORIENTATION_OPT"
1073 msgstr "Reverse orientation with normal vectors simulation"
1075 #: GeometryGUI_PartitionDlg.cxx:45
1076 msgid "GEOM_PARTITION_TITLE"
1077 msgstr "Partition Of Object With Tool"
1079 #: GeometryGUI_PartitionDlg.cxx:45
1080 msgid "GEOM_KEEP_OBJECT"
1081 msgstr "Keep Object"
1083 #: GeometryGUI_PartitionDlg.cxx:45
1084 msgid "GEOM_PARTITION_ORIENTATION"
1085 msgstr "Change Orientation"
1087 #: GeometryGUI_PartitionDlg.cxx:45
1088 msgid "SUPPRESS_RESULT"
1089 msgstr "Suppress Result"
1091 msgid "GEOM_REMOVE_WEBS"
1092 msgstr "Remove webs"
1094 msgid "GEOM_SET_MATERIALS"
1095 msgstr "Set materials"
1097 #: OperationGUI_MaterialDlg.cxx:45
1098 msgid "GEOM_MATERIAL_TITLE"
1099 msgstr "Define materials for Dominant Fuse"
1101 msgid "GEOM_MATERIAL_SHAPE"
1104 msgid "GEOM_MATERIAL_MATERIAL"
1107 msgid "GEOM_MATERIAL_ID"
1108 msgstr "Material ID:"
1110 msgid "GEOM_MATERIAL_SET"
1113 #: GeometryGUI_PipeDlg.cxx:47
1114 msgid "GEOM_PIPE_TITLE"
1115 msgstr "Pipe Construction"
1117 #: GeometryGUI_PointDlg.cxx:52
1118 msgid "GEOM_POINT_TITLE"
1119 msgstr "Point Construction"
1121 #: GeometryGUI_PlaneDlg.cxx:60
1122 msgid "GEOM_PLANE_TITLE"
1123 msgstr "Plane Construction"
1125 #: GeometryGUI_PlaneDlg.cxx:172
1126 msgid "GEOM_PLANE_PVC"
1127 msgstr "Point + Coordinate Vector"
1129 #: GeometryGUI_PlaneDlg.cxx:133
1130 msgid "GEOM_PLANE_PV"
1131 msgstr "Point + Vector"
1133 #: GeometryGUI_PrismDlg.cxx:54
1134 msgid "GEOM_EXTRUSION_TITLE"
1135 msgstr "Construction by Extrusion"
1137 #: GeometryGUI_PrismDlg.cxx:83
1138 msgid "GEOM_EXTRUSION_BSV"
1139 msgstr "Base Shape + Vector"
1141 msgid "GEOM_EXTRUSION_BSV_2P"
1142 msgstr "Base Shape + 2 Points"
1144 #: GeometryGUI_PropertiesDlg.cxx:56
1145 msgid "GEOM_PROPERTIES_TITLE"
1146 msgstr "Basic Properties Informations"
1148 #: GeometryGUI_PropertiesDlg.cxx:78
1149 msgid "GEOM_PROPERTIES_CONSTR"
1150 msgstr "Object And Its Properties"
1152 #: GeometryGUI_PropertiesDlg.cxx:114
1153 msgid "GEOM_PROPERTIES_SURFACE"
1154 msgstr "Surface is :"
1156 #: GeometryGUI_PropertiesDlg.cxx:120
1157 msgid "GEOM_PROPERTIES_VOLUME"
1158 msgstr "Volume is :"
1160 #: GeometryGUI_RevolDlg.cxx:49
1161 msgid "GEOM_REVOLUTION_TITLE"
1162 msgstr "Construction By Revolution"
1164 #: GeometryGUI_RotationDlg.cxx:51
1165 msgid "GEOM_ROTATION_TITLE"
1166 msgstr "Rotation Of An Object"
1168 #: GeometryGUI_ScaleDlg.cxx:52
1169 msgid "GEOM_SCALE_TITLE"
1170 msgstr "Scale An Object"
1172 #: GeometryGUI_PositionDlg.cxx:52
1173 msgid "GEOM_POSITION_TITLE"
1174 msgstr "Modify the Location of an Object"
1176 #: GeometryGUI_PositionDlg.cxx:52
1177 msgid "GEOM_START_LCS"
1180 #: GeometryGUI_PositionDlg.cxx:52
1181 msgid "GEOM_END_LCS"
1184 #: GeometryGUI_OffsetDlg.cxx:53
1185 msgid "GEOM_OFFSET_TITLE"
1186 msgstr "Offset Surface"
1188 #: GeometryGUI_ScaleDlg.cxx:117
1189 msgid "GEOM_SCALE_FACTOR"
1190 msgstr "Scale Factor :"
1192 #: GeometryGUI_SectionDlg.cxx:50
1193 msgid "GEOM_SECTION_TITLE"
1194 msgstr "BOOLEAN : Section Of Two Objects"
1196 #: GeometryGUI_SewingDlg.cxx:48
1197 msgid "GEOM_SEWING_TITLE"
1198 msgstr "Topological sewing"
1200 #: GeometryGUI_ShellDlg.cxx:53
1201 msgid "GEOM_SHELL_TITLE"
1202 msgstr "Shell Construction"
1204 #: GeometryGUI_SolidDlg.cxx:74
1205 msgid "GEOM_SOLID_TITLE"
1206 msgstr "Solid Construction"
1208 #: GeometryGUI_SphereDlg.cxx:50
1209 msgid "GEOM_SPHERE_TITLE"
1210 msgstr "Sphere Construction"
1212 #: GeometryGUI_SphereDlg.cxx:113
1213 msgid "GEOM_SPHERE_CR"
1214 msgstr "Center + Radius"
1216 #: GeometryGUI_SphereDlg.cxx:146
1217 msgid "GEOM_SPHERE_RO"
1218 msgstr "Radius At Origin"
1220 #: GeometryGUI_SubShapeDlg.cxx:55
1221 msgid "GEOM_SUBSHAPE_TITLE"
1222 msgstr "Sub Shapes Selection"
1224 #: GeometryGUI_SubShapeDlg.cxx:131
1225 msgid "GEOM_SUBSHAPE_TYPE"
1226 msgstr "Sub Shapes Type :"
1228 #: GeometryGUI_SubShapeDlg.cxx:137
1229 msgid "GEOM_SUBSHAPE_SELECT"
1230 msgstr "Select Sub Shapes"
1232 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1233 msgstr "Please, select one or more sub-shapes"
1235 #: GeometryGUI_TorusDlg.cxx:51
1236 msgid "GEOM_TORUS_TITLE"
1237 msgstr "Torus Construction"
1239 #: GeometryGUI_SuppressFacesDlg.cxx:103
1240 msgid "GEOM_SUPRESSFACE_TITLE"
1241 msgstr "Suppress Faces In An Object"
1243 #: GeometryGUI_SuppressFacesDlg.cxx:164
1244 msgid "GEOM_SUPRESSFACE_SELECT"
1245 msgstr "Select Faces To Suppress"
1247 #: GeometryGUI_TranslationDlg.cxx:78
1248 msgid "GEOM_TRANSLATION_COOR"
1249 msgstr "Translation With Coordinates"
1251 msgid "GEOM_TRANSPARENCY_TITLE"
1252 msgstr "Transparency"
1254 msgid "GEOM_TRANSPARENCY_OPAQUE"
1257 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1258 msgstr "Transparent"
1260 msgid "GEOM_SUPPRESSHOLE_TITLE"
1261 msgstr "Suppress holes"
1263 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1264 msgstr "Select the face with hole"
1266 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1267 msgstr "Select wire on face"
1269 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1270 msgstr "Select end face (if hole traversing)"
1272 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1273 msgstr "Select end wire (if hole traversing)"
1275 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1276 msgstr "Face or shell"
1278 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1279 msgstr "Select hole(s) on the face"
1281 #: GeometryGUI_TranslationDlg.cxx:56
1282 msgid "GEOM_TRANSLATION_TITLE"
1283 msgstr "Translation Of An Object"
1285 #: GeometryGUI_VectorDlg.cxx:54
1286 msgid "GEOM_VECTOR_TITLE"
1287 msgstr "Vector Construction"
1289 #: GeometryGUI_WhatisDlg.cxx:63
1290 msgid "GEOM_WHATIS_TITLE"
1291 msgstr "Whatis Informations"
1293 #: GeometryGUI_WhatisDlg.cxx:86
1294 msgid "GEOM_WHATIS_OBJECT"
1295 msgstr "Object And Its Topological Informations"
1297 #: GeometryGUI_WireDlg.cxx:46
1298 msgid "GEOM_WIRE_TITLE"
1299 msgstr "Create A Wire"
1301 #: GeometryGUI_WireDlg.cxx:103
1302 msgid "GEOM_WIRE_CONNECT"
1303 msgstr "Wire creation from wires/edges connected"
1305 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1306 msgid "GEOM_WPLANE_TITLE"
1307 msgstr "Working Plane Selection"
1309 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1310 msgid "GEOM_WPLANE_FACE"
1311 msgstr "Plane, Planar Face or LCS"
1313 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1314 msgid "GEOM_WPLANE_VECTOR"
1315 msgstr "Select 2 vectors"
1317 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1318 msgid "GEOM_WPLANE_VX"
1321 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1322 msgid "GEOM_WPLANE_VZ"
1325 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1326 msgid "GEOM_WPLANE_ORIGIN"
1327 msgstr "Select a plane"
1329 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1330 msgid "GEOM_WPLANE_OYZ"
1333 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1334 msgid "GEOM_WPLANE_OZX"
1337 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1338 msgid "GEOM_WPLANE_OXY"
1341 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1342 msgid "GEOM_REVERSE_PLANE"
1343 msgstr "Reverse the plane normal"
1345 #: GeometryGUI_multiTranslationDlg.cxx:107
1346 msgid "GEOM_MULTITRANSLATION_TITLE"
1347 msgstr "Multi-Translation"
1349 #: GeometryGUI_multiTranslationDlg.cxx:107
1350 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1351 msgstr "Multi Translation Simple"
1353 #: GeometryGUI_multiTranslationDlg.cxx:107
1354 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1355 msgstr "Multi Translation Double"
1357 #: GeometryGUI_multiRotationDlg.cxx:107
1358 msgid "GEOM_MULTIROTATION_TITLE"
1359 msgstr "Multi-Rotation"
1361 #: GeometryGUI_multiRotationDlg.cxx:107
1362 msgid "GEOM_MULTIROTATION_SIMPLE"
1363 msgstr "Multi Rotation Simple"
1365 #: GeometryGUI_multiRotationDlg.cxx:107
1366 msgid "GEOM_MULTIROTATION_DOUBLE"
1367 msgstr "Multi Rotation Double"
1369 msgid "GEOM_PARAM_POINT"
1370 msgstr "Parametric point"
1372 msgid "GEOM_REF_POINT"
1373 msgstr "Point with reference"
1375 msgid "GEOM_LINE_INTERSECTION"
1376 msgstr "Point On Lines Intersection"
1379 #==============================================================================
1382 #: GeometryGUI.cxx:4613
1383 msgid "GEOM_MEN_WIREFRAME"
1386 #: GeometryGUI.cxx:4613
1387 msgid "GEOM_MEN_SHADING"
1390 msgid "GEOM_RECONSTRUCTION_LIMIT"
1391 msgstr "Reconstruction Limit"
1393 msgid "GEOM_KEEP_NONLIMIT_SHAPES"
1394 msgstr "Keep nonlimit shapes"
1396 msgid "GEOM_SUPPRESS_RESULT"
1397 msgstr "Suppress Result"
1399 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1402 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1405 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1407 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1409 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1411 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1413 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1415 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1417 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1420 msgid "GEOM_SPLINE_TITLE"
1421 msgstr "Spline Construction"
1426 msgid "GEOM_INTERPOL"
1427 msgstr "Interpolation"
1430 #==============================================================================
1433 msgid "GEOM_SKETCHER_EL"
1434 msgstr "Element Type"
1436 msgid "GEOM_BUT_CLOSE_SKETCH"
1437 msgstr "Sketch Closure"
1439 msgid "GEOM_BUT_END_SKETCH"
1440 msgstr "Sketch Validation"
1442 msgid "GEOM_SKETCHER_TITLE"
1443 msgstr "Sketch Construction"
1445 msgid "GEOM_SKETCHER_POINT"
1448 msgid "GEOM_SKETCHER_SEGMENT"
1451 msgid "GEOM_SKETCHER_ARC"
1454 msgid "GEOM_SKETCHER_DIR"
1457 msgid "GEOM_SKETCHER_POINT2"
1460 msgid "GEOM_SKETCHER_DEST"
1461 msgstr "Destination"
1463 msgid "GEOM_SKETCHER_ABS"
1466 msgid "GEOM_SKETCHER_REL"
1469 msgid "GEOM_SKETCHER_SEL"
1472 msgid "GEOM_SKETCHER_ANGLE"
1475 msgid "GEOM_SKETCHER_PER"
1476 msgstr "Perpendicular"
1478 msgid "GEOM_SKETCHER_TAN"
1481 msgid "GEOM_SKETCHER_VXVY"
1484 msgid "GEOM_SKETCHER_LENGTH"
1487 msgid "GEOM_SKETCHER_X"
1490 msgid "GEOM_SKETCHER_Y"
1493 msgid "GEOM_SKETCHER_X2"
1496 msgid "GEOM_SKETCHER_Y2"
1499 msgid "GEOM_SKETCHER_X3"
1502 msgid "GEOM_SKETCHER_Y3"
1505 msgid "GEOM_SKETCHER_DX2"
1508 msgid "GEOM_SKETCHER_DY2"
1511 msgid "GEOM_SKETCHER_VX2"
1514 msgid "GEOM_SKETCHER_VY2"
1517 msgid "GEOM_SKETCHER_LENGTH2"
1520 msgid "GEOM_SKETCHER_ANGLE2"
1523 msgid "GEOM_SKETCHER_RADIUS2"
1526 msgid "GEOM_SKETCHER_UNDO"
1529 msgid "GEOM_SKETCHER_APPLY"
1532 msgid "GEOM_SKETCHER_VALUES"
1535 msgid "GEOM_SKETCHER_TYPE"
1538 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1539 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1541 msgid "GEOM_FILLET_ABORT"
1542 msgstr "Fillet can't be computed with radius %1"
1544 msgid "GEOM_CHAMFER_ABORT"
1545 msgstr "Chamfer can't be computed with %1 and %2"
1547 msgid "GEOM_3_POINTS"
1550 msgid "GEOM_CENTER_2POINTS"
1551 msgstr "Center and two points"
1562 msgid "GEOM_CREATE_COPY"
1563 msgstr "Create a copy"
1565 msgid "GEOM_CREATE_SINGLE_SOLID"
1566 msgstr "Create a single solid"
1571 msgid "GEOM_ERROR_STATUS"
1572 msgstr "Operation status"
1574 msgid "GEOM_ELLIPSE_ERROR_1"
1575 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1580 msgid "GEOM_POLYLINE"
1586 msgid "GEOM_CURVE_TITLE"
1587 msgstr "Curve Construction"
1589 # ShapeProcessDlg.cxx
1590 msgid "GEOM_SHAPEPROCESS_TITLE"
1591 msgstr "Shape Processing"
1596 msgid "GEOM_SELECTED_OBJECTS"
1597 msgstr "Selected objects"
1599 msgid "GEOM_OPERATIONS"
1602 msgid "GEOM_PARAMETERS"
1605 msgid "GEOM_FixShape"
1608 msgid "GEOM_FixFaceSize"
1609 msgstr "FixFaceSize"
1611 msgid "GEOM_DropSmallEdges"
1612 msgstr "DropSmallEdges"
1614 msgid "GEOM_SplitAngle"
1617 msgid "GEOM_SplitClosedFaces"
1618 msgstr "SplitClosedFaces"
1620 msgid "GEOM_SplitContinuity"
1621 msgstr "SplitContinuity"
1623 msgid "GEOM_BSplineRestriction"
1624 msgstr "BSplineRestriction"
1626 msgid "GEOM_ToBezier"
1629 msgid "GEOM_SameParameter"
1630 msgstr "SameParameter"
1632 msgid "GEOM_3D_TOLERANCE"
1633 msgstr "3D tolerance"
1635 msgid "GEOM_MAX_3D_TOLERANCE"
1636 msgstr "Max 3D tolerance"
1638 msgid "GEOM_MAX_TOLERANCE"
1639 msgstr "Max tolerance"
1641 msgid "GEOM_ANGLE_1"
1644 msgid "GEOM_NUM_SPLIT_POINTS"
1645 msgstr "Number of splitting points"
1647 msgid "GEOM_SURFACE_CONTINUTY"
1648 msgstr "Surface continuity"
1650 msgid "GEOM_CURVE_CONTINUTY"
1651 msgstr "Curve continuity"
1653 msgid "GEOM_SURFACE_MODE"
1654 msgstr "Surface mode"
1656 msgid "GEOM_3D_CURVE_MODE"
1657 msgstr "3D curve mode"
1659 msgid "GEOM_2D_CURVE_MODE"
1660 msgstr "2D curve mode"
1662 msgid "GEOM_2D_TOLERANCE"
1663 msgstr "2D tolerance"
1665 msgid "GEOM_REQUIRED_DEGREE"
1666 msgstr "Required degree"
1668 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1669 msgstr "Required number of segments"
1671 msgid "GEOM_3D_CONTINUTY"
1672 msgstr "3D continuity"
1674 msgid "GEOM_2D_CONTINUTY"
1675 msgstr "2D continuity"
1677 msgid "GEOM_CLOSECONTOUR_TITLE"
1678 msgstr "Close contour"
1680 msgid "GEOM_ERR_LIB_NOT_FOUND"
1681 msgstr "GUI library corresponding to the user action can not be found or loaded"
1683 msgid "OperationGUI_ChamferDlg::FACE_1"
1686 msgid "OperationGUI_ChamferDlg::FACE_2"
1689 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1690 msgstr "Selected faces"
1692 msgid "OperationGUI_ChamferDlg::D"
1695 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1696 msgstr "Selected edges"
1698 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1699 msgstr "Selected faces"
1701 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1702 msgstr "Suppress internal wires"
1704 msgid "GEOM_INTERNAL_WIRES"
1705 msgstr "Internal wires"
1707 msgid "GEOM_SELECTED_FACE"
1708 msgstr "Selected face"
1710 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1711 msgstr "Remove all internal wires"
1713 msgid "GEOM_REMOVE_HOLES_TITLE"
1714 msgstr "Suppress holes"
1716 msgid "GEOM_SELECTED_SHAPE"
1717 msgstr "Selected shape"
1719 msgid "GEOM_REMOVE_ALL_HOLES"
1720 msgstr "Remove all holes"
1725 msgid "GEOM_WIRES_TO_REMOVE"
1726 msgstr "Wires to remove"
1731 msgid "GEOM_FREE_BOUNDARIES"
1732 msgstr "Free boundaries"
1734 msgid "GEOM_FREE_FACES"
1737 msgid "GEOM_CHANGE_ORIENTATION_TITLE"
1738 msgstr "Change orientation"
1740 msgid "GEOM_CHANGE_ORIENTATION"
1741 msgstr "Objects to change orientation"
1743 msgid "GEOM_REMOVE_EXTRA_EDGES_TITLE"
1744 msgstr "Remove extra edges"
1746 msgid "GEOM_REMOVE_EXTRA_EDGES"
1747 msgstr "Object to remove extra edges"
1749 msgid "GEOM_BY_PARAMETER"
1750 msgstr "By parameter"
1752 msgid "GEOM_BY_LENGTH"
1755 msgid "GEOM_DIVIDE_EDGE_TITLE"
1756 msgstr "Addition of point"
1758 msgid "GEOM_ADD_POINT"
1764 msgid "GEOM_MARKER_TITLE"
1765 msgstr "Create marker"
1770 msgid "GEOM_TRIHEDRON"
1773 msgid "GEOM_FREE_BOUNDS_MSG"
1774 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1776 msgid "GEOM_FREE_BOUNDS_ERROR"
1777 msgstr "Object is not selected"
1779 msgid "GEOM_FREE_BOUNDS_TLT"
1780 msgstr "Free boundary detection"
1782 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1783 msgstr "Check free boundaries"
1785 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1786 msgstr "Free boundaries"
1788 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1789 msgstr "Number of closed free boundaries: "
1791 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1792 msgstr "Number of open free boundaries: "
1794 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1795 msgstr "Please, select at least one Shape Process operation to proceed."
1797 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1798 msgstr "Please, select a geometrical object for Shape Processing."
1800 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1801 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1803 msgid "MeasureGUI_PointDlg::POINT"
1806 msgid "MeasureGUI_PointDlg::X"
1809 msgid "MeasureGUI_PointDlg::Y"
1812 msgid "MeasureGUI_PointDlg::Z"
1815 msgid "MeasureGUI_PointDlg::CAPTION"
1816 msgstr "Point Coordinates"
1818 msgid "MeasureGUI_PointDlg::COORDINATES"
1819 msgstr "Point and its coordinates"
1821 msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
1822 msgstr "Check also geometry"
1824 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1825 msgstr "Create Group"
1827 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1830 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1833 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1836 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1837 msgstr "Main Shape And Sub-Shapes"
1839 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1842 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1843 msgstr "Select Sub-Shapes"
1845 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1848 msgid "GroupGUI_GroupDlg::ADD"
1851 msgid "GroupGUI_GroupDlg::REMOVE"
1854 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1857 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1858 msgstr "Please, specify a non-empty group name"
1860 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1861 msgstr "Please, select a main shape"
1863 msgid "GroupGUI_GroupDlg::NO_GROUP"
1864 msgstr "Please, select a group to edit"
1866 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1867 msgstr "Please, select one or more sub-shapes to put into the group"
1869 msgid "GroupGUI::NO_GROUP"
1870 msgstr "Please, select a group to edit"
1877 msgid "WRN_NOT_IMPLEMENTED"
1878 msgstr "Sorry, this functionality is not yet implemented"
1880 ### BlocksGUI_TrsfDlg ###
1882 msgid "BlocksGUI_TrsfDlg::FACE_1"
1885 msgid "BlocksGUI_TrsfDlg::FACE_2"
1888 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1891 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1894 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1897 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1900 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1901 msgstr "Block Multi-Transformation"
1903 msgid "GEOM_BLOCK_MULTITRSF"
1904 msgstr "Block Multi-Transformation"
1906 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1907 msgstr "Multi-Transformation Simple"
1909 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1910 msgstr "Multi-Transformation Double"
1912 ### BlocksGUI_QuadFaceDlg ###
1914 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1917 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1920 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1923 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1926 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1929 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1932 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1935 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1938 msgid "GEOM_QUAD_FACE_TITLE"
1939 msgstr "Quadrangle Face Construction"
1941 msgid "GEOM_QUAD_FACE"
1942 msgstr "Quadrangle Face"
1944 ### BlocksGUI_BlockDlg ###
1946 msgid "BlocksGUI_BlockDlg::FACE_1"
1949 msgid "BlocksGUI_BlockDlg::FACE_2"
1952 msgid "BlocksGUI_BlockDlg::FACE_3"
1955 msgid "BlocksGUI_BlockDlg::FACE_4"
1958 msgid "BlocksGUI_BlockDlg::FACE_5"
1961 msgid "BlocksGUI_BlockDlg::FACE_6"
1964 msgid "GEOM_BLOCK_TITLE"
1965 msgstr "Hexahedral Solid Construction"
1968 msgstr "Hexahedral Solid"
1970 #==============================================================================
1972 msgid "BasicGUI_MarkerDlg::CAPTION"
1973 msgstr "Local CS Construction"
1975 msgid "BasicGUI_MarkerDlg::LOCALCS"
1976 msgstr "Local coordinate system"
1978 msgid "BasicGUI_MarkerDlg::ORIGIN"
1979 msgstr "Coordinates of origin"
1981 msgid "BasicGUI_MarkerDlg::XDIR"
1982 msgstr "X axis direction"
1984 msgid "BasicGUI_MarkerDlg::YDIR"
1985 msgstr "Y axis direction"
1987 msgid "BasicGUI_MarkerDlg::DX"
1990 msgid "BasicGUI_MarkerDlg::DY"
1993 msgid "BasicGUI_MarkerDlg::DZ"
1996 msgid "BasicGUI_MarkerDlg::LCS_NAME"
1999 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
2000 msgstr "Coordinate system axes cannot be parallel"
2032 ### BlocksGUI_ExplodeDlg ###
2034 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
2035 msgstr "Min. nb. faces"
2037 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
2038 msgstr "Max. nb. faces"
2040 msgid "GEOM_BLOCK_EXPLODE_TITLE"
2041 msgstr "Sub Blocks Selection"
2043 msgid "GEOM_BLOCK_EXPLODE"
2046 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
2047 msgstr "There are %1 specified blocks and NO other solids"
2049 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
2050 msgstr "There are %1 specified blocks and some other solids"
2052 msgid "ShHealOper_NotError_msg"
2053 msgstr "Shape Healing algorithm has done no modification of the original shape"
2055 msgid "ShHealOper_InvalidParameters_msg"
2056 msgstr "Incorrect parameters for Shape Healing algorithm"
2058 msgid "ShHealOper_ErrorExecution_msg"
2059 msgstr "Shape Healing algorithm failed"
2061 msgid "GEOM_GLUE_TITLE"
2067 msgid "RepairGUI_GlueDlg::SELECT_FACES"
2068 msgstr "Select Faces"
2070 msgid "RepairGUI_GlueDlg::FACES_FOR_GLUING_ARE_DETECTED"
2071 msgstr "There are %1 face(s) that can be glued. They are coloured on the screen with red colour\nPlease close this message box and select faces for glueing"
2073 msgid "RepairGUI_GlueDlg::GLUE_FACES"
2076 msgid "RepairGUI_GlueDlg::THERE_ARE_NO_FACES_FOR_GLUING"
2077 msgstr "There are no faces for gluing"
2079 msgid "GEOM_FREE_FACES_TITLE"
2082 ### New object names for RepairGUI ###
2083 msgid "SEWING_NEW_OBJ_NAME"
2086 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
2089 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
2090 msgstr "CloseContour"
2092 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
2093 msgstr "SupressHoles"
2095 msgid "GLUE_NEW_OBJ_NAME"
2098 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
2099 msgstr "RemoveIntWires"
2101 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
2102 msgstr "ProcessShape"
2104 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
2105 msgstr "SupressFaces"
2107 msgid "CHANGE_ORIENTATION_NEW_OBJ_NAME"
2110 msgid "REMOVE_EXTRA_EDGES_NEW_OBJ_NAME"
2111 msgstr "NoExtraEdges"
2113 msgid "NON_GEOM_OBJECTS_SELECTED"
2114 msgstr "There are objects selected which do not belong to %1 component."
2116 msgid "GEOM_PROPAGATE_TITLE"
2119 msgid "GEOM_PROPAGATE"
2122 ### Menu of GEOM module ###
2127 msgstr "Import geometry from BREP file"
2133 msgstr "Import geometry from BREP file"
2136 msgstr "Export geometry to BREP file"
2142 msgstr "Export geometry to BREP file"
2148 msgstr "Delete object"
2154 msgstr "Delete object"
2156 msgid "MEN_NEW_ENTITY"
2163 msgstr "Create a point"
2169 msgstr "Create a point"
2172 msgstr "Create a line"
2178 msgstr "Create a line"
2181 msgstr "Create a circle"
2187 msgstr "Create a circle"
2190 msgstr "Create an ellipse"
2196 msgstr "Create an ellipse"
2199 msgstr "Create an arc"
2205 msgstr "Create an arc"
2208 msgstr "Create a curve"
2214 msgstr "Create a curve"
2217 msgstr "Create a vector"
2223 msgstr "Create a vector"
2226 msgstr "Create a plane"
2232 msgstr "Create a plane"
2234 msgid "TOP_WORK_PLANE"
2235 msgstr "Create a working plane"
2237 msgid "MEN_WORK_PLANE"
2238 msgstr "Working plane"
2240 msgid "STB_WORK_PLANE"
2241 msgstr "Create a working plane"
2243 msgid "TOP_LOCAL_CS"
2244 msgstr "Create a local coordinate system"
2246 msgid "MEN_LOCAL_CS"
2247 msgstr "Local coordinate system"
2249 msgid "STB_LOCAL_CS"
2250 msgstr "Create a local coordinate system"
2252 msgid "MEN_PRIMITIVES"
2256 msgstr "Create a box"
2262 msgstr "Create a box"
2264 msgid "TOP_CYLINDER"
2265 msgstr "Create a cylinder"
2267 msgid "MEN_CYLINDER"
2270 msgid "STB_CYLINDER"
2271 msgstr "Create a cylinder"
2274 msgstr "Create a sphere"
2280 msgstr "Create a sphere"
2283 msgstr "Create a torus"
2289 msgstr "Create a torus"
2292 msgstr "Create a cone"
2298 msgstr "Create a cone"
2300 msgid "MEN_GENERATION"
2303 msgid "TOP_EXTRUSION"
2304 msgstr "Create an extrusion"
2306 msgid "MEN_EXTRUSION"
2309 msgid "STB_EXTRUSION"
2310 msgstr "Create an extrusion"
2312 msgid "TOP_REVOLUTION"
2313 msgstr "Create a revolution"
2315 msgid "MEN_REVOLUTION"
2318 msgid "STB_REVOLUTION"
2319 msgstr "Create a revolution"
2322 msgstr "Create a filling"
2328 msgstr "Create a filling"
2331 msgstr "Extrusion along a path"
2334 msgstr "Extrusion along a path"
2337 msgstr "Create a shape by Extrusion along a path"
2342 msgid "TOP_GROUP_CREATE"
2343 msgstr "Create a group"
2345 msgid "MEN_GROUP_CREATE"
2348 msgid "STB_GROUP_CREATE"
2349 msgstr "Create a group"
2351 msgid "TOP_GROUP_EDIT"
2352 msgstr "Edit a group"
2354 msgid "MEN_GROUP_EDIT"
2357 msgid "STB_GROUP_EDIT"
2358 msgstr "Edit a group"
2364 msgstr "Quadrangle Face"
2367 msgstr "Quadrangle Face"
2370 msgstr "Quadrangle Face"
2372 msgid "TOP_HEX_SOLID"
2373 msgstr "Hexahedral Solid"
2375 msgid "MEN_HEX_SOLID"
2376 msgstr "Hexahedral Solid"
2378 msgid "STB_HEX_SOLID"
2379 msgstr "Hexahedral Solid"
2403 msgstr "Build an edge"
2409 msgstr "Build an edge"
2412 msgstr "Build a wire"
2418 msgstr "Build a wire"
2421 msgstr "Build a face"
2427 msgstr "Build a face from wires and/or edges"
2430 msgstr "Build a shell"
2436 msgstr "Build a shell"
2439 msgstr "Build a solid"
2445 msgstr "Build a solid"
2447 msgid "TOP_COMPOUND"
2448 msgstr "Build a compound"
2450 msgid "MEN_COMPOUND"
2453 msgid "STB_COMPOUND"
2454 msgstr "Build a compound"
2456 msgid "MEN_OPERATIONS"
2498 msgid "MEN_TRANSFORMATION"
2499 msgstr "Transformation"
2501 msgid "TOP_TRANSLATION"
2502 msgstr "Translation"
2504 msgid "MEN_TRANSLATION"
2505 msgstr "Translation"
2507 msgid "STB_TRANSLATION"
2508 msgstr "Translation"
2510 msgid "TOP_ROTATION"
2513 msgid "MEN_ROTATION"
2516 msgid "STB_ROTATION"
2519 msgid "TOP_MODIFY_LOCATION"
2520 msgstr "Modify the Location"
2522 msgid "MEN_MODIFY_LOCATION"
2523 msgstr "Modify the Location"
2525 msgid "STB_MODIFY_LOCATION"
2526 msgstr "Modify the Location"
2529 msgstr "Mirror image"
2532 msgstr "Mirror image"
2535 msgstr "Mirror image"
2538 msgstr "Scale transform"
2541 msgstr "Scale transform"
2544 msgstr "Scale transform"
2547 msgstr "Offset surface"
2550 msgstr "Offset surface"
2553 msgstr "Offset surface"
2555 msgid "TOP_MUL_TRANSLATION"
2556 msgstr "Multi-Translation"
2558 msgid "MEN_MUL_TRANSLATION"
2559 msgstr "Multi-Translation"
2561 msgid "STB_MUL_TRANSLATION"
2562 msgstr "Multi-Translation"
2564 msgid "TOP_MUL_ROTATION"
2565 msgstr "Multi-Rotation"
2567 msgid "MEN_MUL_ROTATION"
2568 msgstr "Multi-Rotation"
2570 msgid "STB_MUL_ROTATION"
2571 msgstr "Multi-Rotation"
2573 msgid "TOP_PARTITION"
2576 msgid "MEN_PARTITION"
2579 msgid "STB_PARTITION"
2582 msgid "TOP_ARCHIMEDE"
2585 msgid "MEN_ARCHIMEDE"
2588 msgid "STB_ARCHIMEDE"
2609 msgid "TOP_CLIPPING"
2610 msgstr "Clipping range"
2612 msgid "MEN_CLIPPING"
2613 msgstr "Clipping range"
2615 msgid "STB_CLIPPING"
2616 msgstr "Clipping range"
2618 msgid "TOP_MUL_TRANSFORM"
2619 msgstr "Multi-transformation"
2621 msgid "MEN_MUL_TRANSFORM"
2622 msgstr "Multi-transformation"
2624 msgid "STB_MUL_TRANSFORM"
2625 msgstr "Multi-transformation"
2627 msgid "TOP_EXPLODE_BLOCKS"
2628 msgstr "Explode on Blocks"
2630 msgid "MEN_EXPLODE_BLOCKS"
2631 msgstr "Explode on Blocks"
2633 msgid "STB_EXPLODE_BLOCKS"
2634 msgstr "Explode on Blocks"
2636 msgid "TOP_PROPAGATE"
2639 msgid "MEN_PROPAGATE"
2642 msgid "STB_PROPAGATE"
2648 msgid "TOP_SHAPE_PROCESS"
2649 msgstr "Perform shape processing"
2651 msgid "MEN_SHAPE_PROCESS"
2652 msgstr "Shape processing"
2654 msgid "STB_SHAPE_PROCESS"
2655 msgstr "Perform shape processing "
2657 msgid "TOP_SUPPRESS_FACES"
2658 msgstr "Perform suppress faces"
2660 msgid "MEN_SUPPRESS_FACES"
2661 msgstr "Suppress faces"
2663 msgid "STB_SUPPRESS_FACES"
2664 msgstr "Perform suppress faces"
2666 msgid "TOP_CLOSE_CONTOUR"
2667 msgstr "Perform close contour"
2669 msgid "MEN_CLOSE_CONTOUR"
2670 msgstr "Close contour"
2672 msgid "STB_CLOSE_CONTOUR"
2673 msgstr "Perform close contour"
2675 msgid "TOP_SUPPRESS_INT_WIRES"
2676 msgstr "Perform suppress internal wires"
2678 msgid "MEN_SUPPRESS_INT_WIRES"
2679 msgstr "Suppress internal wires"
2681 msgid "STB_SUPPRESS_INT_WIRES"
2682 msgstr "Perform suppress internal wires"
2684 msgid "TOP_SUPPERSS_HOLES"
2685 msgstr "Perform suppress holes"
2687 msgid "MEN_SUPPERSS_HOLES"
2688 msgstr "Suppress holes"
2690 msgid "STB_SUPPERSS_HOLES"
2691 msgstr "Perform suppress holes"
2694 msgstr "Perform sewing"
2700 msgstr "Perform sewing"
2702 msgid "TOP_GLUE_FACES"
2703 msgstr "Perform glue faces"
2705 msgid "MEN_GLUE_FACES"
2708 msgid "STB_GLUE_FACES"
2709 msgstr "Perform glue faces"
2711 msgid "TOP_POINT_ON_EDGE"
2712 msgstr "Add point on edge"
2714 msgid "MEN_POINT_ON_EDGE"
2715 msgstr "Add point on edge"
2717 msgid "STB_POINT_ON_EDGE"
2718 msgstr "Add point on edge"
2720 msgid "TOP_CHECK_FREE_BNDS"
2721 msgstr "Check free boundaries"
2723 msgid "MEN_CHECK_FREE_BNDS"
2724 msgstr "Check free boundaries"
2726 msgid "STB_CHECK_FREE_BNDS"
2727 msgstr "Check free boundaries"
2729 msgid "TOP_CHECK_FREE_FACES"
2730 msgstr "Check free faces"
2732 msgid "MEN_CHECK_FREE_FACES"
2733 msgstr "Check free faces"
2735 msgid "STB_CHECK_FREE_FACES"
2736 msgstr "Check free faces"
2738 msgid "TOP_CHANGE_ORIENTATION"
2739 msgstr "Change orientation"
2741 msgid "MEN_CHANGE_ORIENTATION"
2742 msgstr "Change orientation"
2744 msgid "STB_CHANGE_ORIENTATION"
2745 msgstr "Change orientation"
2747 msgid "TOP_REMOVE_EXTRA_EDGES"
2748 msgstr "Remove extra edges"
2750 msgid "MEN_REMOVE_EXTRA_EDGES"
2751 msgstr "Remove extra edges"
2753 msgid "STB_REMOVE_EXTRA_EDGES"
2754 msgstr "Remove extra edges"
2756 msgid "MEN_MEASURES"
2759 msgid "TOP_POINT_COORDS"
2760 msgstr "Point coordinates"
2762 msgid "MEN_POINT_COORDS"
2763 msgstr "Point coordinates"
2765 msgid "STB_POINT_COORDS"
2766 msgstr "Point coordinates"
2768 msgid "TOP_BASIC_PROPS"
2769 msgstr "Basic properties"
2771 msgid "MEN_BASIC_PROPS"
2772 msgstr "Basic properties"
2774 msgid "STB_BASIC_PROPS"
2775 msgstr "Basic properties"
2777 msgid "TOP_MASS_CENTER"
2778 msgstr "Compute center of mass"
2780 msgid "MEN_MASS_CENTER"
2781 msgstr "Center of mass"
2783 msgid "STB_MASS_CENTER"
2784 msgstr "Compute center of mass"
2787 msgstr "Compute normal to a face"
2790 msgstr "Normal to a face"
2793 msgstr "Compute normal to a face in a point (optional)"
2796 msgstr "Compute intertia"
2802 msgstr "Compute intertia"
2804 msgid "MEN_DIMENSIONS"
2808 msgstr "Compute bounding box"
2811 msgstr "Bounding box"
2814 msgstr "Compute bounding box"
2816 msgid "TOP_MIN_DIST"
2817 msgstr "Compute minimum distance"
2819 msgid "MEN_MIN_DIST"
2820 msgstr "Min distance"
2822 msgid "STB_MIN_DIST"
2823 msgstr "Compute minimum distance"
2825 msgid "TOP_MEASURE_ANGLE"
2826 msgstr "Compute angle"
2828 msgid "MEN_MEASURE_ANGLE"
2831 msgid "STB_MEASURE_ANGLE"
2832 msgstr "Compute angle between two lines or linear edges"
2834 msgid "TOP_TOLERANCE"
2835 msgstr "Compute tolerance"
2837 msgid "MEN_TOLERANCE"
2838 msgstr "Compute tolerance"
2840 msgid "STB_TOLERANCE"
2841 msgstr "Compute tolerance"
2861 msgid "TOP_CHECK_COMPOUND"
2862 msgstr "Check compound of blocks"
2864 msgid "MEN_CHECK_COMPOUND"
2865 msgstr "Check compound of blocks"
2867 msgid "STB_CHECK_COMPOUND"
2868 msgstr "Check compound of blocks"
2873 msgid "TOP_CHECK_GEOMETRY"
2874 msgstr "Check Geometry"
2876 msgid "MEN_CHECK_GEOMETRY"
2877 msgstr "Check Geometry"
2879 msgid "STB_CHECK_GEOMETRY"
2880 msgstr "Check Geometry"
2882 msgid "MEN_PREFERENCES"
2883 msgstr "Preferences"
2885 msgid "MEN_PREFERENCES_GEOM"
2888 msgid "TOP_SHADING_COLOR"
2889 msgstr "Set shading color"
2891 msgid "MEN_SHADING_COLOR"
2892 msgstr "Shading color"
2894 msgid "STB_SHADING_COLOR"
2895 msgstr "Set shading color"
2898 msgstr "Set number of isolines"
2904 msgstr "Set number of isolines"
2906 msgid "TOP_STEP_VALUE"
2907 msgstr "Set step value"
2909 msgid "MEN_STEP_VALUE"
2912 msgid "STB_STEP_VALUE"
2913 msgstr "Set step value"
2918 msgid "MEN_DISPLAY_MODE"
2919 msgstr "Display mode"
2927 msgid "MEN_WIREFRAME"
2933 msgid "TOP_DISPLAY_ALL"
2936 msgid "MEN_DISPLAY_ALL"
2939 msgid "STB_DISPLAY_ALL"
2942 msgid "TOP_ERASE_ALL"
2945 msgid "MEN_ERASE_ALL"
2948 msgid "STB_ERASE_ALL"
2958 msgstr "Show object(s)"
2960 msgid "TOP_DISPLAY_ONLY"
2963 msgid "MEN_DISPLAY_ONLY"
2966 msgid "STB_DISPLAY_ONLY"
2976 msgstr "Hide object(s)"
2978 msgid "TOP_POP_RENAME"
2981 msgid "MEN_POP_RENAME"
2984 msgid "STB_POP_RENAME"
2987 msgid "TOP_POP_WIREFRAME"
2990 msgid "MEN_POP_WIREFRAME"
2993 msgid "STB_POP_WIREFRAME"
2996 msgid "TOP_POP_SHADING"
2999 msgid "MEN_POP_SHADING"
3002 msgid "STB_POP_SHADING"
3005 msgid "TOP_POP_AUTO_COLOR"
3008 msgid "MEN_POP_AUTO_COLOR"
3011 msgid "STB_POP_AUTO_COLOR"
3014 msgid "TOP_POP_DISABLE_AUTO_COLOR"
3015 msgstr "Disable auto color"
3017 msgid "MEN_POP_DISABLE_AUTO_COLOR"
3018 msgstr "Disable auto color"
3020 msgid "STB_POP_DISABLE_AUTO_COLOR"
3021 msgstr "Disable auto color"
3023 msgid "TOP_POP_COLOR"
3026 msgid "MEN_POP_COLOR"
3029 msgid "STB_POP_COLOR"
3032 msgid "TOP_POP_TRANSPARENCY"
3033 msgstr "Transparency"
3035 msgid "MEN_POP_TRANSPARENCY"
3036 msgstr "Transparency"
3038 msgid "STB_POP_TRANSPARENCY"
3039 msgstr "Transparency"
3041 msgid "TOP_POP_ISOS"
3044 msgid "MEN_POP_ISOS"
3047 msgid "STB_POP_ISOS"
3050 msgid "TOP_POP_CREATE_GROUP"
3051 msgstr "Create Group"
3053 msgid "MEN_POP_CREATE_GROUP"
3054 msgstr "Create Group"
3056 msgid "STB_POP_CREATE_GROUP"
3057 msgstr "Create Group"
3062 msgid "TOOL_PRIMITIVES"
3065 msgid "TOOL_BOOLEAN"
3066 msgstr "Boolean operations"
3068 msgid "TOOL_GENERATION"
3071 msgid "TOOL_TRANSFORMATION"
3072 msgstr "Transformation"
3080 msgid "GEOM_RESULT_NAME_GRP"
3081 msgstr "Result name"
3083 msgid "GEOM_RESULT_NAME_LBL"
3086 msgid "GEOM_ERR_GET_ENGINE"
3087 msgstr "Failed to obtain GEOM Engine component. Reload Geometry module and try again."
3089 msgid "PREF_GROUP_OCCVIEWER"
3090 msgstr "OCC Viewer 3d"
3092 msgid "PREF_GROUP_GENERAL"
3095 msgid "PREF_GROUP_VERTEX"
3096 msgstr "Marker of Points"
3098 msgid "PREF_SHADING_COLOR"
3099 msgstr "Default shading color"
3101 msgid "PREF_WIREFRAME_COLOR"
3102 msgstr "Default wireframe color"
3104 msgid "PREF_FREE_BOUND_COLOR"
3105 msgstr "Color of free boundaries"
3107 msgid "PREF_LINE_COLOR"
3108 msgstr "Color of edges, vectors, wires"
3110 msgid "PREF_POINT_COLOR"
3111 msgstr "Color of points"
3113 msgid "PREF_ISOS_COLOR"
3114 msgstr "Color of isolines"
3116 msgid "PREF_STEP_VALUE"
3117 msgstr "Step value for spin boxes"
3119 msgid "PREF_DISPLAY_MODE"
3120 msgstr "Default display mode"
3122 msgid "PREF_TAB_SETTINGS"
3125 msgid "PREF_TYPE_OF_MARKER"
3128 msgid "PREF_MARKER_SCALE"
3158 msgid "ERROR_SHAPE_TYPE"
3159 msgstr "Object of incorrect type selected!\nPlease, select face, shell or solid and try again"
3162 msgstr "Selected object has been used to create another one\n It can't be deleted "
3164 msgid "MEN_SELECT_ONLY"
3165 msgstr "Select Only"
3167 msgid "STB_VERTEX_SEL_ONLY"
3168 msgstr "Select only a Points"
3170 msgid "STB_EDGE_SEL_ONLY"
3171 msgstr "Select only a Edges"
3173 msgid "STB_WIRE_SEL_ONLY"
3174 msgstr "Select only a Wires"
3176 msgid "STB_FACE_SEL_ONLY"
3177 msgstr "Select only a Faces"
3179 msgid "STB_SHELL_SEL_ONLY"
3180 msgstr "Select only a Shells"
3182 msgid "STB_SOLID_SEL_ONLY"
3183 msgstr "Select only a Solids"
3185 msgid "STB_COMPOUND_SEL_ONLY"
3186 msgstr "Select only a Compounds"
3188 msgid "STB_ALL_SEL_ONLY"
3189 msgstr "Select all Objects"
3191 msgid "MEN_VERTEX_SEL_ONLY"
3194 msgid "MEN_EDGE_SEL_ONLY"
3197 msgid "MEN_WIRE_SEL_ONLY"
3200 msgid "MEN_FACE_SEL_ONLY"
3203 msgid "MEN_SHELL_SEL_ONLY"
3206 msgid "MEN_SOLID_SEL_ONLY"
3209 msgid "MEN_COMPOUND_SEL_ONLY"
3212 msgid "MEN_ALL_SEL_ONLY"