1 # Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 # This library is free software; you can redistribute it and/or
5 # modify it under the terms of the GNU Lesser General Public
6 # License as published by the Free Software Foundation; either
7 # version 2.1 of the License.
9 # This library is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 # Lesser General Public License for more details.
14 # You should have received a copy of the GNU Lesser General Public
15 # License along with this library; if not, write to the Free Software
16 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # This is a Qt message file in .po format. Each msgid starts with
21 # a scope. This scope should *NOT* be translated - eg. translating
22 # from French to English, "Foo::Bar" would be translated to "Pub",
26 "Project-Id-Version: PROJECT VERSION\n"
27 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
28 "PO-Revision-Date: 2003-10-27 17:32+0100\n"
29 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
30 "Content-Type: text/plain; charset=iso-8859-1\n"
33 #==============================================================================
37 msgid "GEOM_BUT_APPLY"
41 msgid "GEOM_BUT_CLOSE"
45 msgid "GEOM_BUT_CANCEL"
65 msgid "GEOM_BUT_EXPLODE"
69 #==============================================================================
72 #: GeometryGUI.cxx:563
73 msgid "GEOM_INF_LOADED"
74 msgstr "File %1 loaded."
77 #==============================================================================
80 #: GeometryGUI.cxx:3069
81 msgid "GEOM_PRP_COMMAND"
82 msgstr "No command associated with this id = %1."
84 #: GeometryGUI.cxx:4977
85 msgid "GEOM_PRP_ABORT"
86 msgstr "Operation aborted"
88 #: GeometryGUI.cxx:5058
90 msgstr "Operation done"
92 #: GeometryGUI.cxx:3717
93 msgid "GEOM_PRP_LOADING"
94 msgstr "Loading %1 ..."
96 #: GeometryGUI.cxx:1412
97 msgid "GEOM_PRP_NULLSHAPE"
98 msgstr "Error, null or inappropriate shape !"
100 #: GeometryGUI.cxx:5072
101 msgid "GEOM_PRP_READY"
104 #: GeometryGUI.cxx:1690
105 msgid "GEOM_PRP_SELECT_SUBSHAPES"
106 msgstr "Select Sub Shapes"
108 msgid "GEOM_PRP_EXPORT"
109 msgstr "Exporting geometry to %1 ..."
112 msgstr "Confirm operation"
114 msgid "GEOM_CONFIRM_INFO"
115 msgstr "Shape contains %1 sub shapes !"
118 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
119 msgstr "Not allowed in VTK viewer"
121 #: GeometryGUI.cxx:1690
122 msgid "GEOM_PRP_SHAPE_IN_STUDY"
123 msgstr "Main shape must be in the study before"
125 #: GeometryGUI.cxx:1690
126 msgid "GEOM_PRP_SELECT_EDGE"
127 msgstr "Select edges and click on Apply"
129 #: GeometryGUI.cxx:1690
130 msgid "GEOM_PRP_SELECT_FACE"
131 msgstr "Select faces to suppress and click on Ok/Apply"
133 #: GeometryGUI.cxx:1690
134 msgid "GEOM_PRP_SELECT_FIRST"
135 msgstr "Select main shape first"
137 #: GeometryGUI.cxx:1690
138 msgid "GEOM_PRP_MIN_DIST"
139 msgstr "Min Distance not computed"
141 msgid "GEOM_STUDY_LOCKED"
142 msgstr "The active study is locked and therefore cannot be modified"
145 #==============================================================================
148 #: GeometryGUI.cxx:3698
149 msgid "GEOM_MEN_ALL_FILES"
150 msgstr "All Files ( * )"
152 #: GeometryGUI.cxx:4389
153 msgid "GEOM_MEN_ANGLE"
156 #: GeometryGUI.cxx:3941
157 msgid "GEOM_MEN_COMPONENT"
160 #: GeometryGUI.cxx:4389
161 msgid "GEOM_MEN_ENTER_ANGLE"
162 msgstr "Enter An Angle In Degrees"
164 #: GeometryGUI.cxx:3758
165 msgid "GEOM_MEN_EXPORT"
168 #: GeometryGUI.cxx:3648
169 msgid "GEOM_MEN_IMPORT"
172 #: GeometryGUI.cxx:2931
173 msgid "GEOM_MEN_ISOS"
174 msgstr "Select Number Of Isos"
176 #: GeometryGUI.cxx:4278
177 msgid "GEOM_MEN_POPUP_NAME"
180 #: GeometryGUI.cxx:4414
181 msgid "GEOM_MEN_SKETCHER_X"
182 msgstr "Enter a length to set X"
184 #: GeometryGUI.cxx:4438
185 msgid "GEOM_MEN_SKETCHER_Y"
186 msgstr "Enter a length to set Y"
188 #: GeometryGUI.cxx:2898
189 msgid "GEOM_MEN_TRANSPARENCY"
190 msgstr "Transparency"
192 #: GeometryGUI.cxx:4413
196 #: GeometryGUI.cxx:4437
200 #: GeometryGUI_NbIsosDlg.cxx:36
201 msgid "GEOM_MEN_ISOU"
204 #: GeometryGUI_NbIsosDlg.cxx:53
205 msgid "GEOM_MEN_ISOV"
208 #: GeometryGUI_TransparencyDlg.cxx:31
209 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
210 msgstr "Transparency :"
212 msgid "GEOM_MEN_STEP_LABEL"
215 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
216 msgstr "Identical names : select by mouse !"
218 msgid "GEOM_NAME_INCORRECT"
219 msgstr "Object name not found"
221 msgid "GEOM_INCORRECT_INPUT"
222 msgstr "Incorrect input data!"
225 #==============================================================================
228 #: GeometryGUI.cxx:892
229 msgid "GEOM_WRN_RADIUS_NULL"
230 msgstr "Radius is null"
232 #: GeometryGUI.cxx:3854
233 msgid "GEOM_WRN_WARNING"
236 #: GeometryGUI.cxx:3854
237 msgid "GEOM_REALLY_DELETE"
238 msgstr "Do you really want to delete object(s) ?"
241 #==============================================================================
249 msgid "GEOM_MAIN_OBJECT"
253 msgid "GEOM_TOOL_OBJECT"
257 msgid "GEOM_BASE_OBJECT"
261 msgid "GEOM_PATH_OBJECT"
269 msgid "GEOM_OBJECT_I"
273 msgid "GEOM_OBJECT_RESULT"
274 msgstr "Object And Result"
281 msgid "GEOM_BASE_POINT"
285 msgid "GEOM_CENTER_POINT"
286 msgstr "Center Point"
289 msgid "GEOM_DIAGONAL_POINTS"
290 msgstr "Diagonal Points"
293 msgid "GEOM_CENTRAL_POINT"
294 msgstr "Central Point"
305 msgid "GEOM_ARGUMENTS"
317 msgid "GEOM_RADIUS_I"
333 msgid "GEOM_COORDINATES"
345 msgid "GEOM_REVERSE_U"
349 msgid "GEOM_REVERSE_V"
365 msgid "GEOM_VECTOR_LENGTH"
366 msgstr "Vector Length :"
369 msgid "GEOM_REVERSE_VECTOR"
370 msgstr "Reverse Vector"
373 msgid "GEOM_POINT_MIRROR"
374 msgstr "Point Mirror"
377 msgid "GEOM_AXE_MIRROR"
381 msgid "GEOM_PLANE_MIRROR"
382 msgstr "Plane Mirror"
385 msgid "GEOM_FACE_SELECTION"
386 msgstr "Face Selection"
393 msgid "GEOM_WATER_DENSITY"
394 msgstr "Water Density :"
397 msgid "GEOM_MESHING_DEFLECTION"
398 msgstr "Meshing Deflect. :"
401 msgid "GEOM_DIMENSIONS"
405 msgid "GEOM_PRECISION"
409 msgid "GEOM_SELECTION"
413 msgid "GEOM_NB_TIMES"
417 msgid "GEOM_NB_TIMES_U"
418 msgstr "Nb. Times U :"
421 msgid "GEOM_NB_TIMES_V"
422 msgstr "Nb. Times V :"
437 #==============================================================================
441 msgid "GEOM_PARTITION"
444 #Half-space partition
445 msgid "GEOM_PARTITION_HALFSPACE"
446 msgstr "Half-space partition"
449 msgid "GEOM_TOLERANCE"
453 msgid "GEOM_ORIENTATION"
461 msgid "GEOM_REVOLUTION"
465 msgid "GEOM_ROTATION"
469 msgid "GEOM_ARCHIMEDE"
481 msgid "GEOM_DISTANCE"
497 msgid "GEOM_POSITION"
513 msgid "GEOM_TRANSLATION"
518 msgstr "Working Plane"
525 msgid "GEOM_EXTRUSION"
529 msgid "GEOM_SUB_SHAPE"
533 msgid "GEOM_SUPRESSFACE"
534 msgstr "Supress Face"
545 msgid "GEOM_CHECK_SHAPE"
548 #Check Blocks Compound
549 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
550 msgstr "Check and Improve Blocks Compound"
552 #Check Blocks Compound Errors
553 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
556 #Check Blocks Compound Errors
557 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS"
558 msgstr "The Compound of Blocks has no errors"
560 msgid "GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS"
561 msgstr "The Compound of Blocks has errors"
563 #Check Blocks Compound SubShapes
564 msgid "GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"
565 msgstr "Incriminated Sub-Shapes"
573 msgstr "Bounding Box"
577 msgstr "Center Of Mass"
580 msgid "GEOM_PROPERTIES"
581 msgstr "Basic Properties"
584 msgid "GEOM_MULTITRANSLATION"
585 msgstr "Multi-Translation"
588 msgid "GEOM_MULTIROTATION"
589 msgstr "Multi-Rotation"
592 #==============================================================================
611 msgid "GEOM_ELLIPSE_TITLE"
612 msgstr "Ellipse Construction"
615 msgid "GEOM_RADIUS_MAJOR"
616 msgstr "Major radius :"
619 msgid "GEOM_RADIUS_MINOR"
620 msgstr "Minor radius :"
623 msgid "GEOM_COMPOUND"
627 msgid "GEOM_BLOCKS_COMPOUND"
628 msgstr "BlocksCompound"
631 msgid "GEOM_COMPOUNDSOLID"
639 msgid "GEOM_CYLINDER"
655 msgid "GEOM_FACE_OR_LCS"
687 msgid "GEOM_SURFCONE"
688 msgstr "Conical Face"
691 msgid "GEOM_SURFCYLINDER"
692 msgstr "Cylindrical Face"
695 msgid "GEOM_SURFSPHERE"
696 msgstr "Spherical Face"
699 msgid "GEOM_SURFTORUS"
700 msgstr "Toroidal Face"
711 msgid "GEOM_VECTOR_U"
715 msgid "GEOM_VECTOR_V"
735 msgstr "Imported_Shape"
738 msgid "GEOM_PARAMETER"
742 #==============================================================================
786 #==============================================================================
790 msgid "GEOM_STEP_TITLE"
791 msgstr "Step value for GUI constructions"
793 #: GeometryGUI_ArcDlg.cxx:45
794 msgid "GEOM_ARC_TITLE"
795 msgstr "Arc Construction"
797 #: GeometryGUI_ArchimedeDlg.cxx:55
798 msgid "GEOM_ARCHIMEDE_TITLE"
799 msgstr "Archimede Construction"
801 #: GeometryGUI_BndBoxDlg.cxx:59
802 msgid "GEOM_BNDBOX_TITLE"
803 msgstr "Bounding Box Informations"
805 #: GeometryGUI_BndBoxDlg.cxx:82
806 msgid "GEOM_BNDBOX_OBJDIM"
807 msgstr "Object And Its Dimensions"
809 #: GeometryGUI_BoxDlg.cxx:50
810 msgid "GEOM_BOX_TITLE"
811 msgstr "Box Construction"
813 #: GeometryGUI_BoxDlg.cxx:50
815 msgstr "Dimensions At Origin"
817 #: GeometryGUI_ChamferDlg.cxx:58
818 msgid "GEOM_CHAMFER_TITLE"
819 msgstr "Chamfer Construction"
821 #: GeometryGUI_ChamferDlg.cxx:58
822 msgid "GEOM_CHAMFER_ALL"
823 msgstr "Chamfer On Whole Shape"
825 #: GeometryGUI_ChamferDlg.cxx:58
826 msgid "GEOM_CHAMFER_EDGES"
827 msgstr "Chamfer On Edges From Shape"
829 #: GeometryGUI_ChamferDlg.cxx:58
830 msgid "GEOM_CHAMFER_FACES"
831 msgstr "Chamfer On Faces From Shape"
833 #: GeometryGUI_CircleDlg.cxx:48
834 msgid "GEOM_CIRCLE_TITLE"
835 msgstr "Circle Construction"
837 #: GeometryGUI_CenterMassDlg.cxx:77
838 msgid "GEOM_CMASS_TITLE"
839 msgstr "Center Of Mass Construction"
841 msgid "GEOM_PLANE_SIZE"
842 msgstr "Size of plane :"
844 #: GeometryGUI_CommonDlg.cxx:47
845 msgid "GEOM_COMMON_TITLE"
846 msgstr "BOOLEAN : Common Of Two Objects"
848 #: GeometryGUI_CompoundDlg.cxx:44
849 msgid "GEOM_COMPOUND_TITLE"
850 msgstr "Create A Compound"
852 #: GeometryGUI_ConeDlg.cxx:49
853 msgid "GEOM_CONE_TITLE"
854 msgstr "Cone Construction"
856 #: GeometryGUI_CutDlg.cxx:48
857 msgid "GEOM_CUT_TITLE"
858 msgstr "BOOLEAN : Cut Of Two Objects"
860 #: GeometryGUI_CylinderDlg.cxx:47
861 msgid "GEOM_CYLINDER_TITLE"
862 msgstr "Cylinder Construction"
864 #: GeometryGUI_CheckShape.cxx:60
865 msgid "GEOM_CHECK_TITLE"
866 msgstr "Check Shape Informations"
868 #: GeometryGUI_CheckShape.cxx:83
869 msgid "GEOM_CHECK_INFOS"
870 msgstr "Object And Its Topological Informations"
872 #: GeometryGUI_DistanceDlg.cxx:57
873 msgid "GEOM_MINDIST_TITLE"
874 msgstr "Minimun Distance Between Two Objects"
876 #: GeometryGUI_DistanceDlg.cxx:57
877 msgid "GEOM_MINDIST_OBJ"
878 msgstr "Objects And Results"
880 #: GeometryGUI_EdgeDlg.cxx:47
881 msgid "GEOM_EDGE_TITLE"
882 msgstr "Create An Edge"
884 #: GeometryGUI_FilletDlg.cxx:58
885 msgid "GEOM_FILLET_TITLE"
886 msgstr "Fillet Construction"
888 #: GeometryGUI_FilletDlg.cxx:58
889 msgid "GEOM_FILLET_ALL"
890 msgstr "Fillet On Whole Shape"
892 #: GeometryGUI_FilletDlg.cxx:58
893 msgid "GEOM_FILLET_EDGES"
894 msgstr "Fillet On Edges From Shape"
896 #: GeometryGUI_FilletDlg.cxx:58
897 msgid "GEOM_FILLET_FACES"
898 msgstr "Fillet On Faces From Shape"
900 #: GeometryGUI_FaceDlg.cxx:49
901 msgid "GEOM_FACE_TITLE"
902 msgstr "Create A Face"
904 #: GeometryGUI_FaceDlg.cxx:78
905 msgid "GEOM_FACE_FFW"
906 msgstr "Face from a closed wire and edge"
908 #: GeometryGUI_FaceDlg.cxx:103
909 msgid "GEOM_FACE_OPT"
910 msgstr "Try to create a planar face"
912 #: GeometryGUI_FillingDlg.cxx:53
913 msgid "GEOM_FILLING_TITLE"
914 msgstr "Filling Surface With Edges"
916 #: GeometryGUI_FillingDlg.cxx:112
917 msgid "GEOM_FILLING_ARG"
918 msgstr "Arguments And Parameters"
920 #: GeometryGUI_FillingDlg.cxx:128
921 msgid "GEOM_FILLING_MIN_DEG"
924 #: GeometryGUI_FillingDlg.cxx:142
925 msgid "GEOM_FILLING_MAX_DEG"
928 #: GeometryGUI_FillingDlg.cxx:150
929 msgid "GEOM_FILLING_TOL_2D"
932 #: GeometryGUI_FillingDlg.cxx:170
933 msgid "GEOM_FILLING_COMPOUND"
934 msgstr "Edges compound"
936 #: GeometryGUI_FillingDlg.cxx:184
937 msgid "GEOM_FILLING_TOL_3D"
940 #: GeometryGUI_FillingDlg.cxx:192
941 msgid "GEOM_FILLING_NB_ITER"
944 #: GeometryGUI_FuseDlg.cxx:48
945 msgid "GEOM_FUSE_TITLE"
946 msgstr "BOOLEAN : Fuse Two Objects"
948 #: GeometryGUI_InertiaDlg.cxx:42
949 msgid "GEOM_INERTIA_TITLE"
950 msgstr "Calculs Of Inertia"
952 #: GeometryGUI_InertiaDlg.cxx:50
953 msgid "GEOM_INERTIA_CONSTR"
954 msgstr "Matrix And Moments Of Inertia"
956 #: GeometryGUI_InertiaDlg.cxx:100
957 msgid "GEOM_INERTIA_I"
960 #: GeometryGUI_InertiaDlg.cxx:182
961 msgid "GEOM_INERTIA_IXYZ"
962 msgstr "IX & IY & IZ :"
964 #: GeometryGUI_LineDlg.cxx:50
965 msgid "GEOM_LINE_TITLE"
966 msgstr "Line Construction"
968 #: GeometryGUI_MaxToleranceDlg.cxx:53
969 msgid "GEOM_TOLERANCE_TITLE"
970 msgstr "Maximum Tolerance"
972 #: GeometryGUI_MaxToleranceDlg.cxx:84
973 msgid "GEOM_TOLERANCE_CONSTR"
974 msgstr "Object And Its Tolerances"
976 #: GeometryGUI_MaxToleranceDlg.cxx:121
977 msgid "GEOM_TOLERANCE_FACE"
980 #: GeometryGUI_MaxToleranceDlg.cxx:138
981 msgid "GEOM_TOLERANCE_EDGE"
984 #: GeometryGUI_MaxToleranceDlg.cxx:155
985 msgid "GEOM_TOLERANCE_VERTEX"
988 #: GeometryGUI_MirrorDlg.cxx:52
989 msgid "GEOM_MIRROR_TITLE"
990 msgstr "Mirror An Object"
992 #: GeometryGUI_OrientationDlg.cxx:46
993 msgid "GEOM_ORIENTATION_TITLE"
994 msgstr "Change Orientation"
996 #: GeometryGUI_OrientationDlg.cxx:134
997 msgid "GEOM_ORIENTATION_OPT"
998 msgstr "Reverse orientation with normal vectors simulation"
1000 #: GeometryGUI_PartitionDlg.cxx:45
1001 msgid "GEOM_PARTITION_TITLE"
1002 msgstr "Partition Of Object With Tool"
1004 #: GeometryGUI_PartitionDlg.cxx:45
1005 msgid "GEOM_KEEP_OBJECT"
1006 msgstr "Keep Object"
1008 #: GeometryGUI_PartitionDlg.cxx:45
1009 msgid "GEOM_PARTITION_ORIENTATION"
1010 msgstr "Change Orientation"
1012 #: GeometryGUI_PartitionDlg.cxx:45
1013 msgid "SUPPRESS_RESULT"
1014 msgstr "Suppress Result"
1016 msgid "GEOM_REMOVE_WEBS"
1017 msgstr "Remove webs"
1019 msgid "GEOM_SET_MATERIALS"
1020 msgstr "Set materials"
1022 #: OperationGUI_MaterialDlg.cxx:45
1023 msgid "GEOM_MATERIAL_TITLE"
1024 msgstr "Define materials for Dominant Fuse"
1026 msgid "GEOM_MATERIAL_SHAPE"
1029 msgid "GEOM_MATERIAL_MATERIAL"
1032 msgid "GEOM_MATERIAL_ID"
1033 msgstr "Material ID:"
1035 msgid "GEOM_MATERIAL_SET"
1038 #: GeometryGUI_PipeDlg.cxx:47
1039 msgid "GEOM_PIPE_TITLE"
1040 msgstr "Pipe Construction"
1042 #: GeometryGUI_PointDlg.cxx:52
1043 msgid "GEOM_POINT_TITLE"
1044 msgstr "Point Construction"
1046 #: GeometryGUI_PlaneDlg.cxx:60
1047 msgid "GEOM_PLANE_TITLE"
1048 msgstr "Plane Construction"
1050 #: GeometryGUI_PlaneDlg.cxx:172
1051 msgid "GEOM_PLANE_PVC"
1052 msgstr "Point + Coordinate Vector"
1054 #: GeometryGUI_PlaneDlg.cxx:133
1055 msgid "GEOM_PLANE_PV"
1056 msgstr "Point + Vector"
1058 #: GeometryGUI_PrismDlg.cxx:54
1059 msgid "GEOM_EXTRUSION_TITLE"
1060 msgstr "Construction by Extrusion"
1062 #: GeometryGUI_PrismDlg.cxx:83
1063 msgid "GEOM_EXTRUSION_BSV"
1064 msgstr "Base Shape + Vector"
1066 msgid "GEOM_EXTRUSION_BSV_2P"
1067 msgstr "Base Shape + 2 Points"
1069 #: GeometryGUI_PropertiesDlg.cxx:56
1070 msgid "GEOM_PROPERTIES_TITLE"
1071 msgstr "Basic Properties Informations"
1073 #: GeometryGUI_PropertiesDlg.cxx:78
1074 msgid "GEOM_PROPERTIES_CONSTR"
1075 msgstr "Object And Its Properties"
1077 #: GeometryGUI_PropertiesDlg.cxx:114
1078 msgid "GEOM_PROPERTIES_SURFACE"
1079 msgstr "Surface is :"
1081 #: GeometryGUI_PropertiesDlg.cxx:120
1082 msgid "GEOM_PROPERTIES_VOLUME"
1083 msgstr "Volume is :"
1085 #: GeometryGUI_RevolDlg.cxx:49
1086 msgid "GEOM_REVOLUTION_TITLE"
1087 msgstr "Construction By Revolution"
1089 #: GeometryGUI_RotationDlg.cxx:51
1090 msgid "GEOM_ROTATION_TITLE"
1091 msgstr "Rotation Of An Object"
1093 #: GeometryGUI_ScaleDlg.cxx:52
1094 msgid "GEOM_SCALE_TITLE"
1095 msgstr "Scale An Object"
1097 #: GeometryGUI_PositionDlg.cxx:52
1098 msgid "GEOM_POSITION_TITLE"
1099 msgstr "Modify the Location of an Object"
1101 #: GeometryGUI_PositionDlg.cxx:52
1102 msgid "GEOM_START_LCS"
1105 #: GeometryGUI_PositionDlg.cxx:52
1106 msgid "GEOM_END_LCS"
1109 #: GeometryGUI_OffsetDlg.cxx:53
1110 msgid "GEOM_OFFSET_TITLE"
1111 msgstr "Offset Surface"
1113 #: GeometryGUI_ScaleDlg.cxx:117
1114 msgid "GEOM_SCALE_FACTOR"
1115 msgstr "Scale Factor :"
1117 #: GeometryGUI_SectionDlg.cxx:50
1118 msgid "GEOM_SECTION_TITLE"
1119 msgstr "BOOLEAN : Section Of Two Objects"
1121 #: GeometryGUI_SewingDlg.cxx:48
1122 msgid "GEOM_SEWING_TITLE"
1123 msgstr "Topological sewing"
1125 #: GeometryGUI_ShellDlg.cxx:53
1126 msgid "GEOM_SHELL_TITLE"
1127 msgstr "Shell Construction"
1129 #: GeometryGUI_SolidDlg.cxx:74
1130 msgid "GEOM_SOLID_TITLE"
1131 msgstr "Solid Construction"
1133 #: GeometryGUI_SphereDlg.cxx:50
1134 msgid "GEOM_SPHERE_TITLE"
1135 msgstr "Sphere Construction"
1137 #: GeometryGUI_SphereDlg.cxx:113
1138 msgid "GEOM_SPHERE_CR"
1139 msgstr "Center + Radius"
1141 #: GeometryGUI_SphereDlg.cxx:146
1142 msgid "GEOM_SPHERE_RO"
1143 msgstr "Radius At Origin"
1145 #: GeometryGUI_SubShapeDlg.cxx:55
1146 msgid "GEOM_SUBSHAPE_TITLE"
1147 msgstr "Sub Shapes Selection"
1149 #: GeometryGUI_SubShapeDlg.cxx:131
1150 msgid "GEOM_SUBSHAPE_TYPE"
1151 msgstr "Sub Shapes Type :"
1153 #: GeometryGUI_SubShapeDlg.cxx:137
1154 msgid "GEOM_SUBSHAPE_SELECT"
1155 msgstr "Select Sub Shapes"
1157 msgid "EntityGUI_SubShapeDlg::NO_SUBSHAPES_SELECTED"
1158 msgstr "Please, select one or more sub-shapes"
1160 #: GeometryGUI_TorusDlg.cxx:51
1161 msgid "GEOM_TORUS_TITLE"
1162 msgstr "Torus Construction"
1164 #: GeometryGUI_SuppressFacesDlg.cxx:103
1165 msgid "GEOM_SUPRESSFACE_TITLE"
1166 msgstr "Suppress Faces In An Object"
1168 #: GeometryGUI_SuppressFacesDlg.cxx:164
1169 msgid "GEOM_SUPRESSFACE_SELECT"
1170 msgstr "Select Faces To Suppress"
1172 #: GeometryGUI_TranslationDlg.cxx:78
1173 msgid "GEOM_TRANSLATION_COOR"
1174 msgstr "Translation With Coordinates"
1176 msgid "GEOM_TRANSPARENCY_TITLE"
1177 msgstr "Transparency"
1179 msgid "GEOM_TRANSPARENCY_OPAQUE"
1182 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1183 msgstr "Transparent"
1185 msgid "GEOM_SUPPRESSHOLE_TITLE"
1186 msgstr "Suppress holes"
1188 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1189 msgstr "Select the face with hole"
1191 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1192 msgstr "Select wire on face"
1194 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1195 msgstr "Select end face (if hole traversing)"
1197 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1198 msgstr "Select end wire (if hole traversing)"
1200 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1201 msgstr "Face or shell"
1203 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1204 msgstr "Select hole(s) on the face"
1206 #: GeometryGUI_TranslationDlg.cxx:56
1207 msgid "GEOM_TRANSLATION_TITLE"
1208 msgstr "Translation Of An Object"
1210 #: GeometryGUI_VectorDlg.cxx:54
1211 msgid "GEOM_VECTOR_TITLE"
1212 msgstr "Vector Construction"
1214 #: GeometryGUI_WhatisDlg.cxx:63
1215 msgid "GEOM_WHATIS_TITLE"
1216 msgstr "Whatis Informations"
1218 #: GeometryGUI_WhatisDlg.cxx:86
1219 msgid "GEOM_WHATIS_OBJECT"
1220 msgstr "Object And Its Topological Informations"
1222 #: GeometryGUI_WireDlg.cxx:46
1223 msgid "GEOM_WIRE_TITLE"
1224 msgstr "Create A Wire"
1226 #: GeometryGUI_WireDlg.cxx:103
1227 msgid "GEOM_WIRE_CONNECT"
1228 msgstr "Wire creation from wires/edges connected"
1230 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1231 msgid "GEOM_WPLANE_TITLE"
1232 msgstr "Working Plane Selection"
1234 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1235 msgid "GEOM_WPLANE_FACE"
1236 msgstr "Plane, Planar Face or LCS"
1238 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1239 msgid "GEOM_WPLANE_VECTOR"
1240 msgstr "Select 2 vectors"
1242 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1243 msgid "GEOM_WPLANE_VX"
1246 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1247 msgid "GEOM_WPLANE_VZ"
1250 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1251 msgid "GEOM_WPLANE_ORIGIN"
1252 msgstr "Select a plane"
1254 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1255 msgid "GEOM_WPLANE_OYZ"
1258 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1259 msgid "GEOM_WPLANE_OZX"
1262 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1263 msgid "GEOM_WPLANE_OXY"
1266 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1267 msgid "GEOM_REVERSE_PLANE"
1268 msgstr "Reverse the plane normal"
1270 #: GeometryGUI_multiTranslationDlg.cxx:107
1271 msgid "GEOM_MULTITRANSLATION_TITLE"
1272 msgstr "Multi-Translation"
1274 #: GeometryGUI_multiTranslationDlg.cxx:107
1275 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1276 msgstr "Multi Translation Simple"
1278 #: GeometryGUI_multiTranslationDlg.cxx:107
1279 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1280 msgstr "Multi Translation Double"
1282 #: GeometryGUI_multiRotationDlg.cxx:107
1283 msgid "GEOM_MULTIROTATION_TITLE"
1284 msgstr "Multi-Rotation"
1286 #: GeometryGUI_multiRotationDlg.cxx:107
1287 msgid "GEOM_MULTIROTATION_SIMPLE"
1288 msgstr "Multi Rotation Simple"
1290 #: GeometryGUI_multiRotationDlg.cxx:107
1291 msgid "GEOM_MULTIROTATION_DOUBLE"
1292 msgstr "Multi Rotation Double"
1294 msgid "GEOM_PARAM_POINT"
1295 msgstr "Parametric point"
1297 msgid "GEOM_REF_POINT"
1298 msgstr "Point with reference"
1301 #==============================================================================
1304 #: GeometryGUI.cxx:4613
1305 msgid "GEOM_MEN_WIREFRAME"
1308 #: GeometryGUI.cxx:4613
1309 msgid "GEOM_MEN_SHADING"
1312 msgid "GEOM_RECONSTRUCTION_LIMIT"
1313 msgstr "Reconstruction Limit"
1315 msgid "GEOM_SUPPRESS_RESULT"
1316 msgstr "Suppress Result"
1318 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1321 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1324 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1326 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1328 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1330 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1332 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1334 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1336 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1339 msgid "GEOM_SPLINE_TITLE"
1340 msgstr "Spline Construction"
1345 msgid "GEOM_INTERPOL"
1346 msgstr "Interpolation"
1349 #==============================================================================
1352 msgid "GEOM_SKETCHER_EL"
1353 msgstr "Element Type"
1355 msgid "GEOM_BUT_CLOSE_SKETCH"
1356 msgstr "Sketch Closure"
1358 msgid "GEOM_BUT_END_SKETCH"
1359 msgstr "Sketch Validation"
1361 msgid "GEOM_SKETCHER_TITLE"
1362 msgstr "Sketch Construction"
1364 msgid "GEOM_SKETCHER_POINT"
1367 msgid "GEOM_SKETCHER_SEGMENT"
1370 msgid "GEOM_SKETCHER_ARC"
1373 msgid "GEOM_SKETCHER_DIR"
1376 msgid "GEOM_SKETCHER_POINT2"
1379 msgid "GEOM_SKETCHER_DEST"
1380 msgstr "Destination"
1382 msgid "GEOM_SKETCHER_ABS"
1385 msgid "GEOM_SKETCHER_REL"
1388 msgid "GEOM_SKETCHER_SEL"
1391 msgid "GEOM_SKETCHER_ANGLE"
1394 msgid "GEOM_SKETCHER_PER"
1395 msgstr "Perpendicular"
1397 msgid "GEOM_SKETCHER_TAN"
1400 msgid "GEOM_SKETCHER_VXVY"
1403 msgid "GEOM_SKETCHER_LENGTH"
1406 msgid "GEOM_SKETCHER_X"
1409 msgid "GEOM_SKETCHER_Y"
1412 msgid "GEOM_SKETCHER_X2"
1415 msgid "GEOM_SKETCHER_Y2"
1418 msgid "GEOM_SKETCHER_X3"
1421 msgid "GEOM_SKETCHER_Y3"
1424 msgid "GEOM_SKETCHER_DX2"
1427 msgid "GEOM_SKETCHER_DY2"
1430 msgid "GEOM_SKETCHER_VX2"
1433 msgid "GEOM_SKETCHER_VY2"
1436 msgid "GEOM_SKETCHER_LENGTH2"
1439 msgid "GEOM_SKETCHER_ANGLE2"
1442 msgid "GEOM_SKETCHER_RADIUS2"
1445 msgid "GEOM_SKETCHER_UNDO"
1448 msgid "GEOM_SKETCHER_APPLY"
1451 msgid "GEOM_SKETCHER_VALUES"
1454 msgid "GEOM_SKETCHER_TYPE"
1457 msgid "EntityGUI_SketcherDlg::CANNOT_CLOSE"
1458 msgstr "It is impossible to close sketch\nNumber of sketch points too small"
1460 msgid "GEOM_FILLET_ABORT"
1461 msgstr "Fillet can't be computed with radius %1"
1463 msgid "GEOM_CHAMFER_ABORT"
1464 msgstr "Chamfer can't be computed with %1 and %2"
1466 msgid "GEOM_3_POINTS"
1478 msgid "GEOM_CREATE_COPY"
1479 msgstr "Create a copy"
1481 msgid "GEOM_CREATE_SINGLE_SOLID"
1482 msgstr "Create a single solid"
1487 msgid "GEOM_ERROR_STATUS"
1488 msgstr "Operation status"
1490 msgid "GEOM_ELLIPSE_ERROR_1"
1491 msgstr "Error creating ellipse. Reason: minor radius is greater than major radius."
1496 msgid "GEOM_POLYLINE"
1502 msgid "GEOM_CURVE_TITLE"
1503 msgstr "Curve Construction"
1505 # ShapeProcessDlg.cxx
1506 msgid "GEOM_SHAPEPROCESS_TITLE"
1507 msgstr "Shape Processing"
1512 msgid "GEOM_SELECTED_OBJECTS"
1513 msgstr "Selected objects"
1515 msgid "GEOM_OPERATIONS"
1518 msgid "GEOM_PARAMETERS"
1521 msgid "GEOM_FixShape"
1524 msgid "GEOM_FixFaceSize"
1525 msgstr "FixFaceSize"
1527 msgid "GEOM_DropSmallEdges"
1528 msgstr "DropSmallEdges"
1530 msgid "GEOM_SplitAngle"
1533 msgid "GEOM_SplitClosedFaces"
1534 msgstr "SplitClosedFaces"
1536 msgid "GEOM_SplitContinuity"
1537 msgstr "SplitContinuity"
1539 msgid "GEOM_BSplineRestriction"
1540 msgstr "BSplineRestriction"
1542 msgid "GEOM_ToBezier"
1545 msgid "GEOM_SameParameter"
1546 msgstr "SameParameter"
1548 msgid "GEOM_3D_TOLERANCE"
1549 msgstr "3D tolerance"
1551 msgid "GEOM_MAX_3D_TOLERANCE"
1552 msgstr "Max 3D tolerance"
1554 msgid "GEOM_MAX_TOLERANCE"
1555 msgstr "Max tolerance"
1557 msgid "GEOM_ANGLE_1"
1560 msgid "GEOM_NUM_SPLIT_POINTS"
1561 msgstr "Number of splitting points"
1563 msgid "GEOM_SURFACE_CONTINUTY"
1564 msgstr "Surface continuity"
1566 msgid "GEOM_CURVE_CONTINUTY"
1567 msgstr "Curve continuity"
1569 msgid "GEOM_SURFACE_MODE"
1570 msgstr "Surface mode"
1572 msgid "GEOM_3D_CURVE_MODE"
1573 msgstr "3D curve mode"
1575 msgid "GEOM_2D_CURVE_MODE"
1576 msgstr "2D curve mode"
1578 msgid "GEOM_2D_TOLERANCE"
1579 msgstr "2D tolerance"
1581 msgid "GEOM_REQUIRED_DEGREE"
1582 msgstr "Required degree"
1584 msgid "GEOM_REQUIRED_NUM_SEGMENTS"
1585 msgstr "Required number of segments"
1587 msgid "GEOM_3D_CONTINUTY"
1588 msgstr "3D continuity"
1590 msgid "GEOM_2D_CONTINUTY"
1591 msgstr "2D continuity"
1593 msgid "GEOM_CLOSECONTOUR_TITLE"
1594 msgstr "Close contour"
1596 msgid "GEOM_ERR_LIB_NOT_FOUND"
1597 msgstr "GUI library corresponding to the user action can not be found or loaded"
1599 msgid "OperationGUI_ChamferDlg::FACE_1"
1602 msgid "OperationGUI_ChamferDlg::FACE_2"
1605 msgid "OperationGUI_ChamferDlg::SELECTED_FACES"
1606 msgstr "Selected faces"
1608 msgid "OperationGUI_ChamferDlg::D"
1611 msgid "OperationGUI_FilletDlg::SELECTED_EDGES"
1612 msgstr "Selected edges"
1614 msgid "OperationGUI_FilletDlg::SELECTED_FACES"
1615 msgstr "Selected faces"
1617 msgid "GEOM_REMOVE_INTERNAL_WIRES_TITLE"
1618 msgstr "Suppress internal wires"
1620 msgid "GEOM_INTERNAL_WIRES"
1621 msgstr "Internal wires"
1623 msgid "GEOM_SELECTED_FACE"
1624 msgstr "Selected face"
1626 msgid "GEOM_REMOVE_ALL_INT_WIRES"
1627 msgstr "Remove all internal wires"
1629 msgid "GEOM_REMOVE_HOLES_TITLE"
1630 msgstr "Suppress holes"
1632 msgid "GEOM_SELECTED_SHAPE"
1633 msgstr "Selected shape"
1635 msgid "GEOM_REMOVE_ALL_HOLES"
1636 msgstr "Remove all holes"
1641 msgid "GEOM_WIRES_TO_REMOVE"
1642 msgstr "Wires to remove"
1647 msgid "GEOM_FREE_BOUNDARIES"
1648 msgstr "Free boundaries"
1650 msgid "GEOM_FREE_FACES"
1653 msgid "GEOM_CHANGE_ORIENTATION_TITLE"
1654 msgstr "Change orientation"
1656 msgid "GEOM_CHANGE_ORIENTATION"
1657 msgstr "Objects to change orientation"
1659 msgid "GEOM_BY_PARAMETER"
1660 msgstr "By parameter"
1662 msgid "GEOM_BY_LENGTH"
1665 msgid "GEOM_DIVIDE_EDGE_TITLE"
1666 msgstr "Addition of point"
1668 msgid "GEOM_ADD_POINT"
1674 msgid "GEOM_MARKER_TITLE"
1675 msgstr "Create marker"
1680 msgid "GEOM_TRIHEDRON"
1683 msgid "GEOM_FREE_BOUNDS_MSG"
1684 msgstr "Number of free boundaries detected: %1 (%2 closed, %3 open)"
1686 msgid "GEOM_FREE_BOUNDS_ERROR"
1687 msgstr "Object is not selected"
1689 msgid "GEOM_FREE_BOUNDS_TLT"
1690 msgstr "Free boundary detection"
1692 msgid "RepairGUI_FreeBoundDlg::CAPTION"
1693 msgstr "Check free boundaries"
1695 msgid "RepairGUI_FreeBoundDlg::FREE_BOUND"
1696 msgstr "Free boundaries"
1698 msgid "RepairGUI_FreeBoundDlg::NUMBER_CLOSED"
1699 msgstr "Number of closed free boundaries: "
1701 msgid "RepairGUI_FreeBoundDlg::NUMBER_OPEN"
1702 msgstr "Number of open free boundaries: "
1704 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OPERATORS"
1705 msgstr "Please, select at least one Shape Process operation to proceed."
1707 msgid "RepairGUI_ShapeProcessDlg::ERROR_NO_OBJECTS"
1708 msgstr "Please, select a geometrical object for Shape Processing."
1710 msgid "RepairGUI_ShapeProcessDlg::TIME_CONSUMING"
1711 msgstr "Enabling this option may result in a very time-consuming operation for some input shapes.\nWould you like to continue?"
1713 msgid "MeasureGUI_PointDlg::POINT"
1716 msgid "MeasureGUI_PointDlg::X"
1719 msgid "MeasureGUI_PointDlg::Y"
1722 msgid "MeasureGUI_PointDlg::Z"
1725 msgid "MeasureGUI_PointDlg::CAPTION"
1726 msgstr "Point Coordinates"
1728 msgid "MeasureGUI_PointDlg::COORDINATES"
1729 msgstr "Point and its coordinates"
1731 msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
1732 msgstr "Check also geometry"
1734 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
1735 msgstr "Create Group"
1737 msgid "GroupGUI_GroupDlg::EDIT_GROUP_TITLE"
1740 msgid "GroupGUI_GroupDlg::SHAPE_TYPE"
1743 msgid "GroupGUI_GroupDlg::GROUP_NAME"
1746 msgid "GroupGUI_GroupDlg::MAIN_SUB_SHAPES"
1747 msgstr "Main Shape And Sub-Shapes"
1749 msgid "GroupGUI_GroupDlg::MAIN_SHAPE"
1752 msgid "GroupGUI_GroupDlg::SELECT_SUB_SHAPES"
1753 msgstr "Select Sub-Shapes"
1755 msgid "GroupGUI_GroupDlg::SELECT_ALL"
1758 msgid "GroupGUI_GroupDlg::ADD"
1761 msgid "GroupGUI_GroupDlg::REMOVE"
1764 msgid "GroupGUI_GroupDlg::GROUP_PREFIX"
1767 msgid "GroupGUI_GroupDlg::EMPTY_NAME"
1768 msgstr "Please, specify a non-empty group name"
1770 msgid "GroupGUI_GroupDlg::NO_MAIN_OBJ"
1771 msgstr "Please, select a main shape"
1773 msgid "GroupGUI_GroupDlg::NO_GROUP"
1774 msgstr "Please, select a group to edit"
1776 msgid "GroupGUI_GroupDlg::EMPTY_LIST"
1777 msgstr "Please, select one or more sub-shapes to put into the group"
1779 msgid "GroupGUI::NO_GROUP"
1780 msgstr "Please, select a group to edit"
1787 msgid "WRN_NOT_IMPLEMENTED"
1788 msgstr "Sorry, this functionality is not yet implemented"
1790 ### BlocksGUI_TrsfDlg ###
1792 msgid "BlocksGUI_TrsfDlg::FACE_1"
1795 msgid "BlocksGUI_TrsfDlg::FACE_2"
1798 msgid "BlocksGUI_TrsfDlg::FACE_1U"
1801 msgid "BlocksGUI_TrsfDlg::FACE_2U"
1804 msgid "BlocksGUI_TrsfDlg::FACE_1V"
1807 msgid "BlocksGUI_TrsfDlg::FACE_2V"
1810 msgid "GEOM_BLOCK_MULTITRSF_TITLE"
1811 msgstr "Block Multi-Transformation"
1813 msgid "GEOM_BLOCK_MULTITRSF"
1814 msgstr "Block Multi-Transformation"
1816 msgid "GEOM_BLOCK_MULTITRSF_SIMPLE"
1817 msgstr "Multi-Transformation Simple"
1819 msgid "GEOM_BLOCK_MULTITRSF_DOUBLE"
1820 msgstr "Multi-Transformation Double"
1822 ### BlocksGUI_QuadFaceDlg ###
1824 msgid "BlocksGUI_QuadFaceDlg::VERTEX_1"
1827 msgid "BlocksGUI_QuadFaceDlg::VERTEX_2"
1830 msgid "BlocksGUI_QuadFaceDlg::VERTEX_3"
1833 msgid "BlocksGUI_QuadFaceDlg::VERTEX_4"
1836 msgid "BlocksGUI_QuadFaceDlg::EDGE_1"
1839 msgid "BlocksGUI_QuadFaceDlg::EDGE_2"
1842 msgid "BlocksGUI_QuadFaceDlg::EDGE_3"
1845 msgid "BlocksGUI_QuadFaceDlg::EDGE_4"
1848 msgid "GEOM_QUAD_FACE_TITLE"
1849 msgstr "Quadrangle Face Construction"
1851 msgid "GEOM_QUAD_FACE"
1852 msgstr "Quadrangle Face"
1854 ### BlocksGUI_BlockDlg ###
1856 msgid "BlocksGUI_BlockDlg::FACE_1"
1859 msgid "BlocksGUI_BlockDlg::FACE_2"
1862 msgid "BlocksGUI_BlockDlg::FACE_3"
1865 msgid "BlocksGUI_BlockDlg::FACE_4"
1868 msgid "BlocksGUI_BlockDlg::FACE_5"
1871 msgid "BlocksGUI_BlockDlg::FACE_6"
1874 msgid "GEOM_BLOCK_TITLE"
1875 msgstr "Hexahedral Solid Construction"
1878 msgstr "Hexahedral Solid"
1880 #==============================================================================
1882 msgid "BasicGUI_MarkerDlg::CAPTION"
1883 msgstr "Local CS Construction"
1885 msgid "BasicGUI_MarkerDlg::LOCALCS"
1886 msgstr "Local coordinate system"
1888 msgid "BasicGUI_MarkerDlg::ORIGIN"
1889 msgstr "Coordinates of origin"
1891 msgid "BasicGUI_MarkerDlg::XDIR"
1892 msgstr "X axis direction"
1894 msgid "BasicGUI_MarkerDlg::YDIR"
1895 msgstr "Y axis direction"
1897 msgid "BasicGUI_MarkerDlg::DX"
1900 msgid "BasicGUI_MarkerDlg::DY"
1903 msgid "BasicGUI_MarkerDlg::DZ"
1906 msgid "BasicGUI_MarkerDlg::LCS_NAME"
1909 msgid "BasicGUI_MarkerDlg::VEC_PARALLEL"
1910 msgstr "Coordinate system axes cannot be parallel"
1942 ### BlocksGUI_ExplodeDlg ###
1944 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MIN"
1945 msgstr "Min. nb. faces"
1947 msgid "BlocksGUI_ExplodeDlg::NB_FACES_MAX"
1948 msgstr "Max. nb. faces"
1950 msgid "GEOM_BLOCK_EXPLODE_TITLE"
1951 msgstr "Sub Blocks Selection"
1953 msgid "GEOM_BLOCK_EXPLODE"
1956 msgid "GEOM_NB_BLOCKS_NO_OTHERS"
1957 msgstr "There are %1 specified blocks and NO other solids"
1959 msgid "GEOM_NB_BLOCKS_SOME_OTHERS"
1960 msgstr "There are %1 specified blocks and some other solids"
1962 msgid "ShHealOper_NotError_msg"
1963 msgstr "Shape Healing algorithm has done no modification of the original shape"
1965 msgid "ShHealOper_InvalidParameters_msg"
1966 msgstr "Incorrect parameters for Shape Healing algorithm"
1968 msgid "ShHealOper_ErrorExecution_msg"
1969 msgstr "Shape Healing algorithm failed"
1971 msgid "GEOM_GLUE_TITLE"
1977 msgid "RepairGUI_GlueDlg::SELECT_FACES"
1978 msgstr "Select Faces"
1980 msgid "RepairGUI_GlueDlg::FACES_FOR_GLUING_ARE_DETECTED"
1981 msgstr "There are %1 face(s) that can be glued. They are coloured on the screen with red colour\nPlease close this message box and select faces for glueing"
1983 msgid "RepairGUI_GlueDlg::GLUE_FACES"
1986 msgid "RepairGUI_GlueDlg::THERE_ARE_NO_FACES_FOR_GLUING"
1987 msgstr "There are no faces for gluing"
1989 msgid "GEOM_FREE_FACES_TITLE"
1992 ### New object names for RepairGUI ###
1993 msgid "SEWING_NEW_OBJ_NAME"
1996 msgid "DEVIDE_EDGE_NEW_OBJECT_NAME"
1999 msgid "CLOSE_CONTOUR_NEW_OBJ_NAME"
2000 msgstr "CloseContour"
2002 msgid "REMOVE_HOLES_NEW_OBJ_NAME"
2003 msgstr "SupressHoles"
2005 msgid "GLUE_NEW_OBJ_NAME"
2008 msgid "REMOVE_INT_WIRES_NEW_OBJ_NAME"
2009 msgstr "RemoveIntWires"
2011 msgid "PROCESS_SHAPE_NEW_OBJ_NAME"
2012 msgstr "ProcessShape"
2014 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
2015 msgstr "SupressFaces"
2017 msgid "CHANGE_ORIENTATION_NEW_OBJ_NAME"
2020 msgid "NON_GEOM_OBJECTS_SELECTED"
2021 msgstr "There are objects selected which do not belong to %1 component."
2023 msgid "GEOM_PROPAGATE_TITLE"
2026 msgid "GEOM_PROPAGATE"
2029 ### Menu of GEOM module ###
2034 msgstr "Import geometry from BREP file"
2040 msgstr "Import geometry from BREP file"
2043 msgstr "Export geometry to BREP file"
2049 msgstr "Export geometry to BREP file"
2055 msgstr "Delete object"
2061 msgstr "Delete object"
2063 msgid "MEN_NEW_ENTITY"
2070 msgstr "Create a point"
2076 msgstr "Create a point"
2079 msgstr "Create a line"
2085 msgstr "Create a line"
2088 msgstr "Create a circle"
2094 msgstr "Create a circle"
2097 msgstr "Create an ellipse"
2103 msgstr "Create an ellipse"
2106 msgstr "Create an arc"
2112 msgstr "Create an arc"
2115 msgstr "Create a curve"
2121 msgstr "Create a curve"
2124 msgstr "Create a vector"
2130 msgstr "Create a vector"
2133 msgstr "Create a plane"
2139 msgstr "Create a plane"
2141 msgid "TOP_WORK_PLANE"
2142 msgstr "Create a working plane"
2144 msgid "MEN_WORK_PLANE"
2145 msgstr "Working plane"
2147 msgid "STB_WORK_PLANE"
2148 msgstr "Create a working plane"
2150 msgid "TOP_LOCAL_CS"
2151 msgstr "Create a local coordinate system"
2153 msgid "MEN_LOCAL_CS"
2154 msgstr "Local coordinate system"
2156 msgid "STB_LOCAL_CS"
2157 msgstr "Create a local coordinate system"
2159 msgid "MEN_PRIMITIVES"
2163 msgstr "Create a box"
2169 msgstr "Create a box"
2171 msgid "TOP_CYLINDER"
2172 msgstr "Create a cylinder"
2174 msgid "MEN_CYLINDER"
2177 msgid "STB_CYLINDER"
2178 msgstr "Create a cylinder"
2181 msgstr "Create a sphere"
2187 msgstr "Create a sphere"
2190 msgstr "Create a torus"
2196 msgstr "Create a torus"
2199 msgstr "Create a cone"
2205 msgstr "Create a cone"
2207 msgid "MEN_GENERATION"
2210 msgid "TOP_EXTRUSION"
2211 msgstr "Create an extrusion"
2213 msgid "MEN_EXTRUSION"
2216 msgid "STB_EXTRUSION"
2217 msgstr "Create an extrusion"
2219 msgid "TOP_REVOLUTION"
2220 msgstr "Create a revolution"
2222 msgid "MEN_REVOLUTION"
2225 msgid "STB_REVOLUTION"
2226 msgstr "Create a revolution"
2229 msgstr "Create a filling"
2235 msgstr "Create a filling"
2238 msgstr "Extrusion along a path"
2241 msgstr "Extrusion along a path"
2244 msgstr "Create a shape by Extrusion along a path"
2249 msgid "TOP_GROUP_CREATE"
2250 msgstr "Create a group"
2252 msgid "MEN_GROUP_CREATE"
2255 msgid "STB_GROUP_CREATE"
2256 msgstr "Create a group"
2258 msgid "TOP_GROUP_EDIT"
2259 msgstr "Edit a group"
2261 msgid "MEN_GROUP_EDIT"
2264 msgid "STB_GROUP_EDIT"
2265 msgstr "Edit a group"
2271 msgstr "Quadrangle Face"
2274 msgstr "Quadrangle Face"
2277 msgstr "Quadrangle Face"
2279 msgid "TOP_HEX_SOLID"
2280 msgstr "Hexahedral Solid"
2282 msgid "MEN_HEX_SOLID"
2283 msgstr "Hexahedral Solid"
2285 msgid "STB_HEX_SOLID"
2286 msgstr "Hexahedral Solid"
2310 msgstr "Build an edge"
2316 msgstr "Build an edge"
2319 msgstr "Build a wire"
2325 msgstr "Build a wire"
2328 msgstr "Build a face"
2334 msgstr "Build a face"
2337 msgstr "Build a shell"
2343 msgstr "Build a shell"
2346 msgstr "Build a solid"
2352 msgstr "Build a solid"
2354 msgid "TOP_COMPOUND"
2355 msgstr "Build a compound"
2357 msgid "MEN_COMPOUND"
2360 msgid "STB_COMPOUND"
2361 msgstr "Build a compound"
2363 msgid "MEN_OPERATIONS"
2405 msgid "MEN_TRANSFORMATION"
2406 msgstr "Transformation"
2408 msgid "TOP_TRANSLATION"
2409 msgstr "Translation"
2411 msgid "MEN_TRANSLATION"
2412 msgstr "Translation"
2414 msgid "STB_TRANSLATION"
2415 msgstr "Translation"
2417 msgid "TOP_ROTATION"
2420 msgid "MEN_ROTATION"
2423 msgid "STB_ROTATION"
2426 msgid "TOP_MODIFY_LOCATION"
2427 msgstr "Modify the Location"
2429 msgid "MEN_MODIFY_LOCATION"
2430 msgstr "Modify the Location"
2432 msgid "STB_MODIFY_LOCATION"
2433 msgstr "Modify the Location"
2436 msgstr "Mirror image"
2439 msgstr "Mirror image"
2442 msgstr "Mirror image"
2445 msgstr "Scale transform"
2448 msgstr "Scale transform"
2451 msgstr "Scale transform"
2454 msgstr "Offset surface"
2457 msgstr "Offset surface"
2460 msgstr "Offset surface"
2462 msgid "TOP_MUL_TRANSLATION"
2463 msgstr "Multi-Translation"
2465 msgid "MEN_MUL_TRANSLATION"
2466 msgstr "Multi-Translation"
2468 msgid "STB_MUL_TRANSLATION"
2469 msgstr "Multi-Translation"
2471 msgid "TOP_MUL_ROTATION"
2472 msgstr "Multi-Rotation"
2474 msgid "MEN_MUL_ROTATION"
2475 msgstr "Multi-Rotation"
2477 msgid "STB_MUL_ROTATION"
2478 msgstr "Multi-Rotation"
2480 msgid "TOP_PARTITION"
2483 msgid "MEN_PARTITION"
2486 msgid "STB_PARTITION"
2489 msgid "TOP_ARCHIMEDE"
2492 msgid "MEN_ARCHIMEDE"
2495 msgid "STB_ARCHIMEDE"
2516 msgid "TOP_CLIPPING"
2517 msgstr "Clipping range"
2519 msgid "MEN_CLIPPING"
2520 msgstr "Clipping range"
2522 msgid "STB_CLIPPING"
2523 msgstr "Clipping range"
2525 msgid "TOP_MUL_TRANSFORM"
2526 msgstr "Multi-transformation"
2528 msgid "MEN_MUL_TRANSFORM"
2529 msgstr "Multi-transformation"
2531 msgid "STB_MUL_TRANSFORM"
2532 msgstr "Multi-transformation"
2534 msgid "TOP_EXPLODE_BLOCKS"
2535 msgstr "Explode on Blocks"
2537 msgid "MEN_EXPLODE_BLOCKS"
2538 msgstr "Explode on Blocks"
2540 msgid "STB_EXPLODE_BLOCKS"
2541 msgstr "Explode on Blocks"
2543 msgid "TOP_PROPAGATE"
2546 msgid "MEN_PROPAGATE"
2549 msgid "STB_PROPAGATE"
2555 msgid "TOP_SHAPE_PROCESS"
2556 msgstr "Perform shape processing"
2558 msgid "MEN_SHAPE_PROCESS"
2559 msgstr "Shape processing"
2561 msgid "STB_SHAPE_PROCESS"
2562 msgstr "Perform shape processing "
2564 msgid "TOP_SUPPRESS_FACES"
2565 msgstr "Perform suppress faces"
2567 msgid "MEN_SUPPRESS_FACES"
2568 msgstr "Suppress faces"
2570 msgid "STB_SUPPRESS_FACES"
2571 msgstr "Perform suppress faces"
2573 msgid "TOP_CLOSE_CONTOUR"
2574 msgstr "Perform close contour"
2576 msgid "MEN_CLOSE_CONTOUR"
2577 msgstr "Close contour"
2579 msgid "STB_CLOSE_CONTOUR"
2580 msgstr "Perform close contour"
2582 msgid "TOP_SUPPRESS_INT_WIRES"
2583 msgstr "Perform suppress internal wires"
2585 msgid "MEN_SUPPRESS_INT_WIRES"
2586 msgstr "Suppress internal wires"
2588 msgid "STB_SUPPRESS_INT_WIRES"
2589 msgstr "Perform suppress internal wires"
2591 msgid "TOP_SUPPERSS_HOLES"
2592 msgstr "Perform suppress holes"
2594 msgid "MEN_SUPPERSS_HOLES"
2595 msgstr "Suppress holes"
2597 msgid "STB_SUPPERSS_HOLES"
2598 msgstr "Perform suppress holes"
2601 msgstr "Perform sewing"
2607 msgstr "Perform sewing"
2609 msgid "TOP_GLUE_FACES"
2610 msgstr "Perform glue faces"
2612 msgid "MEN_GLUE_FACES"
2615 msgid "STB_GLUE_FACES"
2616 msgstr "Perform glue faces"
2618 msgid "TOP_POINT_ON_EDGE"
2619 msgstr "Add point on edge"
2621 msgid "MEN_POINT_ON_EDGE"
2622 msgstr "Add point on edge"
2624 msgid "STB_POINT_ON_EDGE"
2625 msgstr "Add point on edge"
2627 msgid "TOP_CHECK_FREE_BNDS"
2628 msgstr "Check free boundaries"
2630 msgid "MEN_CHECK_FREE_BNDS"
2631 msgstr "Check free boundaries"
2633 msgid "STB_CHECK_FREE_BNDS"
2634 msgstr "Check free boundaries"
2636 msgid "TOP_CHECK_FREE_FACES"
2637 msgstr "Check free faces"
2639 msgid "MEN_CHECK_FREE_FACES"
2640 msgstr "Check free faces"
2642 msgid "STB_CHECK_FREE_FACES"
2643 msgstr "Check free faces"
2645 msgid "TOP_CHANGE_ORIENTATION"
2646 msgstr "Change orientation"
2648 msgid "MEN_CHANGE_ORIENTATION"
2649 msgstr "Change orientation"
2651 msgid "STB_CHANGE_ORIENTATION"
2652 msgstr "Change orientation"
2654 msgid "MEN_MEASURES"
2657 msgid "TOP_POINT_COORDS"
2658 msgstr "Point coordinates"
2660 msgid "MEN_POINT_COORDS"
2661 msgstr "Point coordinates"
2663 msgid "STB_POINT_COORDS"
2664 msgstr "Point coordinates"
2666 msgid "TOP_BASIC_PROPS"
2667 msgstr "Basic properties"
2669 msgid "MEN_BASIC_PROPS"
2670 msgstr "Basic properties"
2672 msgid "STB_BASIC_PROPS"
2673 msgstr "Basic properties"
2675 msgid "TOP_MASS_CENTER"
2676 msgstr "Compute center of mass"
2678 msgid "MEN_MASS_CENTER"
2679 msgstr "Center of mass"
2681 msgid "STB_MASS_CENTER"
2682 msgstr "Compute center of mass"
2685 msgstr "Compute intertia"
2691 msgstr "Compute intertia"
2693 msgid "MEN_DIMENSIONS"
2697 msgstr "Compute bounding box"
2700 msgstr "Bounding box"
2703 msgstr "Compute bounding box"
2705 msgid "TOP_MIN_DIST"
2706 msgstr "Compute minimum distance"
2708 msgid "MEN_MIN_DIST"
2709 msgstr "Min distance"
2711 msgid "STB_MIN_DIST"
2712 msgstr "Compute minimum distance"
2714 msgid "TOP_TOLERANCE"
2715 msgstr "Compute tolerance"
2717 msgid "MEN_TOLERANCE"
2718 msgstr "Compute tolerance"
2720 msgid "STB_TOLERANCE"
2721 msgstr "Compute tolerance"
2741 msgid "TOP_CHECK_COMPOUND"
2742 msgstr "Check compound of blocks"
2744 msgid "MEN_CHECK_COMPOUND"
2745 msgstr "Check compound of blocks"
2747 msgid "STB_CHECK_COMPOUND"
2748 msgstr "Check compound of blocks"
2753 msgid "TOP_CHECK_GEOMETRY"
2754 msgstr "Check Geometry"
2756 msgid "MEN_CHECK_GEOMETRY"
2757 msgstr "Check Geometry"
2759 msgid "STB_CHECK_GEOMETRY"
2760 msgstr "Check Geometry"
2762 msgid "MEN_PREFERENCES"
2763 msgstr "Preferences"
2765 msgid "MEN_PREFERENCES_GEOM"
2768 msgid "TOP_SHADING_COLOR"
2769 msgstr "Set shading color"
2771 msgid "MEN_SHADING_COLOR"
2772 msgstr "Shading color"
2774 msgid "STB_SHADING_COLOR"
2775 msgstr "Set shading color"
2778 msgstr "Set number of isolines"
2784 msgstr "Set number of isolines"
2786 msgid "TOP_STEP_VALUE"
2787 msgstr "Set step value"
2789 msgid "MEN_STEP_VALUE"
2792 msgid "STB_STEP_VALUE"
2793 msgstr "Set step value"
2798 msgid "MEN_DISPLAY_MODE"
2799 msgstr "Display mode"
2807 msgid "MEN_WIREFRAME"
2813 msgid "TOP_DISPLAY_ALL"
2814 msgstr "Display all"
2816 msgid "MEN_DISPLAY_ALL"
2817 msgstr "Display all"
2819 msgid "STB_DISPLAY_ALL"
2820 msgstr "Display all"
2822 msgid "TOP_ERASE_ALL"
2825 msgid "MEN_ERASE_ALL"
2828 msgid "STB_ERASE_ALL"
2840 msgid "TOP_DISPLAY_ONLY"
2841 msgstr "Display only"
2843 msgid "MEN_DISPLAY_ONLY"
2844 msgstr "Display only"
2846 msgid "STB_DISPLAY_ONLY"
2847 msgstr "Display only"
2858 msgid "TOP_POP_RENAME"
2861 msgid "MEN_POP_RENAME"
2864 msgid "STB_POP_RENAME"
2867 msgid "TOP_POP_WIREFRAME"
2870 msgid "MEN_POP_WIREFRAME"
2873 msgid "STB_POP_WIREFRAME"
2876 msgid "TOP_POP_SHADING"
2879 msgid "MEN_POP_SHADING"
2882 msgid "STB_POP_SHADING"
2885 msgid "TOP_POP_COLOR"
2888 msgid "MEN_POP_COLOR"
2891 msgid "STB_POP_COLOR"
2894 msgid "TOP_POP_TRANSPARENCY"
2895 msgstr "Transparency"
2897 msgid "MEN_POP_TRANSPARENCY"
2898 msgstr "Transparency"
2900 msgid "STB_POP_TRANSPARENCY"
2901 msgstr "Transparency"
2903 msgid "TOP_POP_ISOS"
2906 msgid "MEN_POP_ISOS"
2909 msgid "STB_POP_ISOS"
2912 msgid "TOP_POP_CREATE_GROUP"
2913 msgstr "Create Group"
2915 msgid "MEN_POP_CREATE_GROUP"
2916 msgstr "Create Group"
2918 msgid "STB_POP_CREATE_GROUP"
2919 msgstr "Create Group"
2924 msgid "TOOL_PRIMITIVES"
2927 msgid "TOOL_BOOLEAN"
2928 msgstr "Boolean operations"
2930 msgid "TOOL_GENERATION"
2933 msgid "TOOL_TRANSFORMATION"
2934 msgstr "Transformation"
2942 msgid "GEOM_ERR_GET_ENGINE"
2943 msgstr "Failed to obtain GEOM Engine component. Reload Geometry module and try again."
2945 msgid "PREF_GROUP_OCCVIEWER"
2946 msgstr "OCC Viewer 3d"
2948 msgid "PREF_GROUP_GENERAL"
2951 msgid "PREF_GROUP_VERTEX"
2952 msgstr "Marker of Points"
2954 msgid "PREF_SHADING_COLOR"
2955 msgstr "Default shading color"
2957 msgid "PREF_WIREFRAME_COLOR"
2958 msgstr "Default wireframe color"
2960 msgid "PREF_FREE_BOUND_COLOR"
2961 msgstr "Color of free boundaries"
2963 msgid "PREF_LINE_COLOR"
2964 msgstr "Color of edges, vectors, wires"
2966 msgid "PREF_POINT_COLOR"
2967 msgstr "Color of points"
2969 msgid "PREF_ISOS_COLOR"
2970 msgstr "Color of isolines"
2972 msgid "PREF_STEP_VALUE"
2973 msgstr "Step value for spin boxes"
2975 msgid "PREF_DISPLAY_MODE"
2976 msgstr "Default display mode"
2978 msgid "PREF_TAB_SETTINGS"
2981 msgid "PREF_TYPE_OF_MARKER"
2984 msgid "PREF_MARKER_SCALE"
3014 msgid "ERROR_SHAPE_TYPE"
3015 msgstr "Object of incorrect type selected!\nPlease, select face, shell or solid and try again"
3018 msgstr "Selected object has been used to create another one\n It can't be deleted "
3020 msgid "MEN_SELECT_ONLY"
3021 msgstr "Select Only"
3023 msgid "STB_VERTEX_SEL_ONLY"
3024 msgstr "Select only a Points"
3026 msgid "STB_EDGE_SEL_ONLY"
3027 msgstr "Select only a Edges"
3029 msgid "STB_WIRE_SEL_ONLY"
3030 msgstr "Select only a Wires"
3032 msgid "STB_FACE_SEL_ONLY"
3033 msgstr "Select only a Faces"
3035 msgid "STB_SHELL_SEL_ONLY"
3036 msgstr "Select only a Shells"
3038 msgid "STB_SOLID_SEL_ONLY"
3039 msgstr "Select only a Solids"
3041 msgid "STB_COMPOUND_SEL_ONLY"
3042 msgstr "Select only a Compounds"
3044 msgid "STB_ALL_SEL_ONLY"
3045 msgstr "Select all Objects"
3047 msgid "MEN_VERTEX_SEL_ONLY"
3050 msgid "MEN_EDGE_SEL_ONLY"
3053 msgid "MEN_WIRE_SEL_ONLY"
3056 msgid "MEN_FACE_SEL_ONLY"
3059 msgid "MEN_SHELL_SEL_ONLY"
3062 msgid "MEN_SOLID_SEL_ONLY"
3065 msgid "MEN_COMPOUND_SEL_ONLY"
3068 msgid "MEN_ALL_SEL_ONLY"