1 # This is a Qt message file in .po format. Each msgid starts with
2 # a scope. This scope should *NOT* be translated - eg. translating
3 # from French to English, "Foo::Bar" would be translated to "Pub",
7 "Project-Id-Version: PROJECT VERSION\n"
8 "POT-Creation-Date: 2002-03-19 09:35:48 AM CET\n"
9 "PO-Revision-Date: YYYY-MM-DD\n"
10 "Last-Translator: FULLNAME <EMAIL@ADDRESS>\n"
11 "Content-Type: text/plain; charset=iso-8859-1\n"
14 #==============================================================================
18 msgid "GEOM_BUT_APPLY"
22 msgid "GEOM_BUT_CLOSE"
26 msgid "GEOM_BUT_CANCEL"
47 msgid "GEOM_BUT_EXPLODE"
51 #==============================================================================
54 #: GeometryGUI.cxx:563
55 msgid "GEOM_INF_LOADED"
56 msgstr "Le fichier %1 est chargé."
59 #==============================================================================
62 #: GeometryGUI.cxx:3069
63 msgid "GEOM_PRP_COMMAND"
64 msgstr "Pas de commande associée à l'id = %1."
66 #: GeometryGUI.cxx:4977
67 msgid "GEOM_PRP_ABORT"
68 msgstr "L'opération a echoué"
70 #: GeometryGUI.cxx:5058
72 msgstr "Opération effectuée"
74 #: GeometryGUI.cxx:3717
75 msgid "GEOM_PRP_LOADING"
76 msgstr "Chargement de %1 ..."
78 #: GeometryGUI.cxx:1412
79 msgid "GEOM_PRP_NULLSHAPE"
80 msgstr "Erreur, objet inconsistant ou inapproprié !"
82 #: GeometryGUI.cxx:5072
83 msgid "GEOM_PRP_READY"
86 #: GeometryGUI.cxx:1690
87 msgid "GEOM_PRP_SELECT_SUBSHAPES"
88 msgstr "Selection de sous objets"
91 msgstr "Confirmer cette operation"
93 msgid "GEOM_CONFIRM_INFO"
94 msgstr "L'objet contient %1 sous objets"
97 msgid "GEOM_PRP_NOT_FOR_VTK_VIEWER"
98 msgstr "Non permis dans viewer VTK"
100 #: GeometryGUI.cxx:1690
101 msgid "GEOM_PRP_SHAPE_IN_STUDY"
102 msgstr "La shape principale doit etre avant dans l'etude"
104 #: GeometryGUI.cxx:1690
105 msgid "GEOM_PRP_SELECT_EDGE"
106 msgstr "Selectionner les edges et clicker sur Apply"
108 #: GeometryGUI.cxx:1690
109 msgid "GEOM_PRP_SELECT_FACE"
110 msgstr "Select les faces a supprimer et clicker sur Ok/Apply"
112 #: GeometryGUI.cxx:1690
113 msgid "GEOM_PRP_SELECT_FIRST"
114 msgstr "Selectionner la shape principale en premier"
116 #: GeometryGUI.cxx:1690
117 msgid "GEOM_PRP_MIN_DIST"
118 msgstr "Min Distance non calculer"
121 #==============================================================================
124 #: GeometryGUI.cxx:3698
125 msgid "GEOM_MEN_ALL_FILES"
126 msgstr "Tous fichiers ( * )"
128 #: GeometryGUI.cxx:4389
129 msgid "GEOM_MEN_ANGLE"
132 #: GeometryGUI.cxx:3941
133 msgid "GEOM_MEN_COMPONENT"
136 #: GeometryGUI.cxx:4389
137 msgid "GEOM_MEN_ENTER_ANGLE"
138 msgstr "Saisir un angle en degrés"
140 #: GeometryGUI.cxx:3758
141 msgid "GEOM_MEN_EXPORT"
144 #: GeometryGUI.cxx:3648
145 msgid "GEOM_MEN_IMPORT"
148 #: GeometryGUI.cxx:3761
149 msgid "GEOM_MEN_IMPORT_BREP"
150 msgstr "Fichiers BREP ( *.brep )"
152 #: GeometryGUI.cxx:3762
153 msgid "GEOM_MEN_IMPORT_IGES"
154 msgstr "Fichiers IGES ( *.iges *.igs )"
156 #: GeometryGUI.cxx:3763
157 msgid "GEOM_MEN_IMPORT_STEP"
158 msgstr "Fichiers STEP ( *.step *.stp )"
160 #: GeometryGUI.cxx:3763
161 msgid "GEOM_MEN_LOAD_SCRIPT"
162 msgstr "Fichiers PYTHON ( *.py )"
164 #: GeometryGUI.cxx:2931
165 msgid "GEOM_MEN_ISOS"
166 msgstr "Choisir un nombre d'isos"
168 #: GeometryGUI.cxx:4278
169 msgid "GEOM_MEN_POPUP_NAME"
172 #: GeometryGUI.cxx:4414
173 msgid "GEOM_MEN_SKETCHER_X"
174 msgstr "Saisir une longueur pour fixer X"
176 #: GeometryGUI.cxx:4438
177 msgid "GEOM_MEN_SKETCHER_Y"
178 msgstr "Saisir une longueur pour fixer Y"
180 #: GeometryGUI.cxx:2898
181 msgid "GEOM_MEN_TRANSPARENCY"
182 msgstr "Transparence"
184 #: GeometryGUI.cxx:4413
188 #: GeometryGUI.cxx:4437
192 #: GeometryGUI_NbIsosDlg.cxx:36
193 msgid "GEOM_MEN_ISOU"
196 #: GeometryGUI_NbIsosDlg.cxx:53
197 msgid "GEOM_MEN_ISOV"
200 #: GeometryGUI_TransparencyDlg.cxx:31
201 msgid "GEOM_MEN_TRANSPARENCY_LABEL"
202 msgstr "Transparence :"
204 msgid "GEOM_MEN_STEP_LABEL"
207 msgid "GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE"
208 msgstr "Noms identiques : selectionner avec la souris !"
210 msgid "GEOM_NAME_INCORRECT"
211 msgstr "Le nom saisi n'existe pas"
216 #==============================================================================
219 #: GeometryGUI.cxx:892
220 msgid "GEOM_WRN_RADIUS_NULL"
221 msgstr "Le rayon est nul"
223 #: GeometryGUI.cxx:3854
224 msgid "GEOM_WRN_WARNING"
225 msgstr "Avertissement"
227 #: GeometryGUI.cxx:3854
228 msgid "GEOM_REALLY_DELETE"
229 msgstr "Voulez-vous supprimer l'object(s) ?"
232 #==============================================================================
240 msgid "GEOM_MAIN_OBJECT"
241 msgstr "Objet Principal"
244 msgid "GEOM_TOOL_OBJECT"
248 msgid "GEOM_BASE_OBJECT"
249 msgstr "Objet De Base"
252 msgid "GEOM_PATH_OBJECT"
253 msgstr "Objet Chemin"
260 msgid "GEOM_OBJECT_I"
264 msgid "GEOM_OBJECT_RESULT"
265 msgstr "Objet Et Résultat"
272 msgid "GEOM_BASE_POINT"
273 msgstr "Point De Base"
276 msgid "GEOM_CENTER_POINT"
277 msgstr "Point Centre"
280 msgid "GEOM_DIAGONAL_POINTS"
281 msgstr "Points Diagonaux"
284 msgid "GEOM_CENTRAL_POINT"
285 msgstr "Point Central"
296 msgid "GEOM_ARGUMENTS"
308 msgid "GEOM_RADIUS_I"
324 msgid "GEOM_COORDINATES"
336 msgid "GEOM_REVERSE_U"
340 msgid "GEOM_REVERSE_V"
356 msgid "GEOM_VECTOR_LENGTH"
357 msgstr "Longueur Du Vecteur :"
360 msgid "GEOM_REVERSE_VECTOR"
361 msgstr "Renverser Le Vecteur"
364 msgid "GEOM_PLANE_MIRROR"
368 msgid "GEOM_FACE_SELECTION"
369 msgstr "Selection de Face"
376 msgid "GEOM_WATER_DENSITY"
377 msgstr "Densité de l'eau :"
380 msgid "GEOM_MESHING_DEFLECTION"
381 msgstr "Déflection Du Maillage :"
384 msgid "GEOM_DIMENSIONS"
388 msgid "GEOM_PRECISION"
392 msgid "GEOM_SELECTION"
396 msgid "GEOM_NB_TIMES"
400 msgid "GEOM_NB_TIMES_U"
401 msgstr "Nb. Fois U :"
404 msgid "GEOM_NB_TIMES_V"
405 msgstr "Nb. Fois V :"
420 #==============================================================================
424 msgid "GEOM_PARTITION"
428 msgid "GEOM_TOLERANCE"
432 msgid "GEOM_ORIENTATION"
440 msgid "GEOM_REVOLUTION"
444 msgid "GEOM_ROTATION"
448 msgid "GEOM_ARCHIMEDE"
460 msgid "GEOM_DISTANCE"
465 msgstr "Surface Par Courbes"
484 msgid "GEOM_TRANSLATION"
489 msgstr "Plan de Travail"
500 msgid "GEOM_SUB_SHAPE"
504 msgid "GEOM_SUPRESSFACE"
505 msgstr "Supression de Face"
516 msgid "GEOM_CHECK_SHAPE"
525 msgstr "Boite Anglobante"
529 msgstr "Centre de Masse"
532 msgid "GEOM_PROPERTIES"
533 msgstr "Basiques Proprietes"
536 msgid "GEOM_MULTITRANSLATION"
537 msgstr "Multi-Translation"
540 msgid "GEOM_MULTIROTATION"
541 msgstr "Multi-Rotation"
544 #==============================================================================
563 msgid "GEOM_ELLIPSE_TITLE"
564 msgstr "Construction d'Ellipses"
567 msgid "GEOM_RADIUS_MAJOR"
568 msgstr "Rayon max. :"
571 msgid "GEOM_RADIUS_MINOR"
572 msgstr "Rayon min. :"
575 msgid "GEOM_COMPOUND"
579 msgid "GEOM_COMPOUNDSOLID"
587 msgid "GEOM_CYLINDER"
627 msgid "GEOM_SURFCONE"
628 msgstr "Face Conique"
631 msgid "GEOM_SURFCYLINDER"
632 msgstr "Face Cylindrique"
635 msgid "GEOM_SURFSPHERE"
636 msgstr "Face Sphèrique"
639 msgid "GEOM_SURFTORUS"
640 msgstr "Face Toroique"
651 msgid "GEOM_VECTOR_U"
655 msgid "GEOM_VECTOR_V"
671 msgid "GEOM_PARAMETER"
676 #==============================================================================
720 #==============================================================================
724 msgid "GEOM_STEP_TITLE"
725 msgstr "Increment par défaut lors des constructions"
727 #: GeometryGUI_ArcDlg.cxx:45
728 msgid "GEOM_ARC_TITLE"
729 msgstr "Construction d'un Arc"
731 #: GeometryGUI_ArchimedeDlg.cxx:55
732 msgid "GEOM_ARCHIMEDE_TITLE"
733 msgstr "Construction d'Archimède"
735 #: GeometryGUI_BndBoxDlg.cxx:59
736 msgid "GEOM_BNDBOX_TITLE"
737 msgstr "Boite Englobante"
739 #: GeometryGUI_BndBoxDlg.cxx:82
740 msgid "GEOM_BNDBOX_OBJDIM"
741 msgstr "Objet and ses dimensions"
743 #: GeometryGUI_BoxDlg.cxx:50
744 msgid "GEOM_BOX_TITLE"
745 msgstr "Construction d'une Boite"
747 #: GeometryGUI_BoxDlg.cxx:50
749 msgstr "Dimensions A l'Origine"
751 #: GeometryGUI_ChamferDlg.cxx:58
752 msgid "GEOM_CHAMFER_TITLE"
753 msgstr "Construction d'un Chanfrein"
755 #: GeometryGUI_ChamferDlg.cxx:58
756 msgid "GEOM_CHAMFER_ALL"
757 msgstr "Chanfrein sur toute la Shape"
759 #: GeometryGUI_ChamferDlg.cxx:58
760 msgid "GEOM_CHAMFER_EDGES"
761 msgstr "Chanfrein sur Edges de la Shape"
763 #: GeometryGUI_ChamferDlg.cxx:58
764 msgid "GEOM_CHAMFER_FACES"
765 msgstr "Chanfrein sur Faces de la Shape"
767 #: GeometryGUI_CircleDlg.cxx:48
768 msgid "GEOM_CIRCLE_TITLE"
769 msgstr "Construction d'un Cercle"
771 #: GeometryGUI_CenterMassDlg.cxx:77
772 msgid "GEOM_CMASS_TITLE"
773 msgstr "Centre De Gravité"
775 msgid "GEOM_PLANE_SIZE"
776 msgstr "Taille du plan :"
778 #: GeometryGUI_CommonDlg.cxx:47
779 msgid "GEOM_COMMON_TITLE"
780 msgstr "BOOLEEN : Jonction De Deux Objets"
782 #: GeometryGUI_CompoundDlg.cxx:44
783 msgid "GEOM_COMPOUND_TITLE"
784 msgstr "Création d'un Compound"
786 #: GeometryGUI_ConeDlg.cxx:49
787 msgid "GEOM_CONE_TITLE"
788 msgstr "Construction d'un Cone"
790 #: GeometryGUI_CutDlg.cxx:48
791 msgid "GEOM_CUT_TITLE"
792 msgstr "BOOLEEN : Couper Deux Objets"
794 #: GeometryGUI_CylinderDlg.cxx:47
795 msgid "GEOM_CYLINDER_TITLE"
796 msgstr "Construction d'un Cylindre"
798 #: GeometryGUI_CheckShape.cxx:60
799 msgid "GEOM_CHECK_TITLE"
802 #: GeometryGUI_CheckShape.cxx:83
803 msgid "GEOM_CHECK_INFOS"
804 msgstr "Objet et ses Informations Topologiques"
806 #: GeometryGUI_DistanceDlg.cxx:57
807 msgid "GEOM_MINDIST_TITLE"
808 msgstr "Distance Minimale entre Deux Objets"
810 #: GeometryGUI_DistanceDlg.cxx:57
811 msgid "GEOM_MINDIST_OBJ"
812 msgstr "Objets Et Resultats"
814 #: GeometryGUI_EdgeDlg.cxx:47
815 msgid "GEOM_EDGE_TITLE"
816 msgstr "Création d'un Edge"
818 #: GeometryGUI_FilletDlg.cxx:58
819 msgid "GEOM_FILLET_TITLE"
820 msgstr "Construction d'un Congé"
822 #: GeometryGUI_FilletDlg.cxx:58
823 msgid "GEOM_FILLET_ALL"
824 msgstr "Congé sur toute la Shape"
826 #: GeometryGUI_FilletDlg.cxx:58
827 msgid "GEOM_FILLET_EDGES"
828 msgstr "Congé sur Edges de la Shape"
830 #: GeometryGUI_FilletDlg.cxx:58
831 msgid "GEOM_FILLET_FACES"
832 msgstr "Congé sur Faces de la Shape"
834 #: GeometryGUI_FaceDlg.cxx:49
835 msgid "GEOM_FACE_TITLE"
836 msgstr "Création d'une Face"
838 #: GeometryGUI_FaceDlg.cxx:78
839 msgid "GEOM_FACE_FFW"
840 msgstr "Face a partir d'un wire"
842 #: GeometryGUI_FaceDlg.cxx:103
843 msgid "GEOM_FACE_OPT"
844 msgstr "Création d'une Face plane"
846 #: GeometryGUI_FillingDlg.cxx:53
847 msgid "GEOM_FILLING_TITLE"
848 msgstr "Surface Par Courbes"
850 #: GeometryGUI_FillingDlg.cxx:112
851 msgid "GEOM_FILLING_ARG"
852 msgstr "Argument Et Parametres"
854 #: GeometryGUI_FillingDlg.cxx:128
855 msgid "GEOM_FILLING_MIN_DEG"
858 #: GeometryGUI_FillingDlg.cxx:142
859 msgid "GEOM_FILLING_MAX_DEG"
862 #: GeometryGUI_FillingDlg.cxx:150
863 msgid "GEOM_FILLING_TOL_2D"
866 #: GeometryGUI_FillingDlg.cxx:170
867 msgid "GEOM_FILLING_COMPOUND"
868 msgstr "Compound de Courbes"
870 #: GeometryGUI_FillingDlg.cxx:184
871 msgid "GEOM_FILLING_TOL_3D"
874 #: GeometryGUI_FillingDlg.cxx:192
875 msgid "GEOM_FILLING_NB_ITER"
878 #: GeometryGUI_FuseDlg.cxx:48
879 msgid "GEOM_FUSE_TITLE"
880 msgstr "BOOLEEN : Fusionner deux Objets"
882 #: GeometryGUI_InertiaDlg.cxx:42
883 msgid "GEOM_INERTIA_TITLE"
884 msgstr "Calculs d'Inertie"
886 #: GeometryGUI_InertiaDlg.cxx:50
887 msgid "GEOM_INERTIA_CONSTR"
888 msgstr "Matrice Et Moments d'Inertie"
890 #: GeometryGUI_InertiaDlg.cxx:100
891 msgid "GEOM_INERTIA_I"
894 #: GeometryGUI_InertiaDlg.cxx:182
895 msgid "GEOM_INERTIA_IXYZ"
896 msgstr "IX & IY & IZ"
898 #: GeometryGUI_LineDlg.cxx:50
899 msgid "GEOM_LINE_TITLE"
900 msgstr "Construction d'une Ligne"
902 #: GeometryGUI_MaxToleranceDlg.cxx:53
903 msgid "GEOM_TOLERANCE_TITLE"
904 msgstr "Tolerance Maximale"
906 #: GeometryGUI_MaxToleranceDlg.cxx:84
907 msgid "GEOM_TOLERANCE_CONSTR"
908 msgstr "Object et ses Tolerances"
910 #: GeometryGUI_MaxToleranceDlg.cxx:121
911 msgid "GEOM_TOLERANCE_FACE"
914 #: GeometryGUI_MaxToleranceDlg.cxx:138
915 msgid "GEOM_TOLERANCE_EDGE"
918 #: GeometryGUI_MaxToleranceDlg.cxx:155
919 msgid "GEOM_TOLERANCE_VERTEX"
922 #: GeometryGUI_MirrorDlg.cxx:52
923 msgid "GEOM_MIRROR_TITLE"
924 msgstr "Methode Miroir"
926 #: GeometryGUI_OrientationDlg.cxx:46
927 msgid "GEOM_ORIENTATION_TITLE"
928 msgstr "Changer l'Orientation"
930 #: GeometryGUI_OrientationDlg.cxx:134
931 msgid "GEOM_ORIENTATION_OPT"
932 msgstr "Renverser l'orientation avec une simulation de vecteur normal"
934 #: GeometryGUI_PartitionDlg.cxx:45
935 msgid "GEOM_PARTITION_TITLE"
936 msgstr "Partition d'Objects Avec Outils"
938 #: GeometryGUI_PartitionDlg.cxx:45
939 msgid "GEOM_KEEP_OBJECT"
942 #: GeometryGUI_PartitionDlg.cxx:45
943 msgid "GEOM_PARTITION_ORIENTATION"
944 msgstr "Change l'orientation"
946 #: GeometryGUI_PartitionDlg.cxx:45
947 msgid "SUPPRESS_RESULT"
948 msgstr "Suppress Result"
950 #: GeometryGUI_PipeDlg.cxx:47
951 msgid "GEOM_PIPE_TITLE"
952 msgstr "Construction d'une Pipe"
954 #: GeometryGUI_PointDlg.cxx:52
955 msgid "GEOM_POINT_TITLE"
956 msgstr "Construction d'un Point"
958 #: GeometryGUI_PlaneDlg.cxx:60
959 msgid "GEOM_PLANE_TITLE"
960 msgstr "Construction d'un Plan"
962 #: GeometryGUI_PlaneDlg.cxx:172
963 msgid "GEOM_PLANE_PVC"
964 msgstr "Point + Vecteur Coordonnes"
966 #: GeometryGUI_PlaneDlg.cxx:133
967 msgid "GEOM_PLANE_PV"
968 msgstr "Point + Vecteur"
970 #: GeometryGUI_PrismDlg.cxx:54
971 msgid "GEOM_PRISM_TITLE"
972 msgstr "Extruder une Shape de base"
974 #: GeometryGUI_PrismDlg.cxx:83
975 msgid "GEOM_PRISM_BSV"
976 msgstr "Shape de base + Vecteur"
978 #: GeometryGUI_PropertiesDlg.cxx:56
979 msgid "GEOM_PROPERTIES_TITLE"
980 msgstr "Proprietes Basiques"
982 #: GeometryGUI_PropertiesDlg.cxx:78
983 msgid "GEOM_PROPERTIES_CONSTR"
984 msgstr "Objet et ses Proprietes"
986 #: GeometryGUI_PropertiesDlg.cxx:114
987 msgid "GEOM_PROPERTIES_SURFACE"
990 #: GeometryGUI_PropertiesDlg.cxx:120
991 msgid "GEOM_PROPERTIES_VOLUME"
994 #: GeometryGUI_RevolDlg.cxx:49
995 msgid "GEOM_REVOLUTION_TITLE"
996 msgstr "Construction Par Revolution"
998 #: GeometryGUI_RotationDlg.cxx:51
999 msgid "GEOM_ROTATION_TITLE"
1000 msgstr "Rotation d'un Objet"
1002 #: GeometryGUI_ScaleDlg.cxx:52
1003 msgid "GEOM_SCALE_TITLE"
1004 msgstr "Echelle d'un Objet"
1006 #: GeometryGUI_ScaleDlg.cxx:117
1007 msgid "GEOM_SCALE_FACTOR"
1008 msgstr "Facteur d'echelle"
1010 #: GeometryGUI_SectionDlg.cxx:50
1011 msgid "GEOM_SECTION_TITLE"
1012 msgstr "BOOLEEN : Section De Deux Objets"
1014 #: GeometryGUI_SewingDlg.cxx:48
1015 msgid "GEOM_SEWING_TITLE"
1016 msgstr "Coudre des Topologies"
1018 #: GeometryGUI_ShellDlg.cxx:53
1019 msgid "GEOM_SHELL_TITLE"
1020 msgstr "Construction d'une Shell"
1022 #: GeometryGUI_SolidDlg.cxx:74
1023 msgid "GEOM_SOLID_TITLE"
1024 msgstr "Construction d'un Solid"
1026 #: GeometryGUI_SphereDlg.cxx:50
1027 msgid "GEOM_SPHERE_TITLE"
1028 msgstr "Construction d'une Sphere"
1030 #: GeometryGUI_SphereDlg.cxx:113
1031 msgid "GEOM_SPHERE_CR"
1032 msgstr "Centre + rayon"
1034 #: GeometryGUI_SphereDlg.cxx:146
1035 msgid "GEOM_SPHERE_RO"
1036 msgstr "Rayon a l'origine"
1038 #: GeometryGUI_SubShapeDlg.cxx:55
1039 msgid "GEOM_SUBSHAPE_TITLE"
1040 msgstr "Selection de Sous Shapes"
1042 #: GeometryGUI_SubShapeDlg.cxx:131
1043 msgid "GEOM_SUBSHAPE_TYPE"
1044 msgstr "Type de Sous Shapes"
1046 #: GeometryGUI_SubShapeDlg.cxx:137
1047 msgid "GEOM_SUBSHAPE_SELECT"
1048 msgstr "Selectionner de Sous Shapes"
1050 #: GeometryGUI_TorusDlg.cxx:51
1051 msgid "GEOM_TORUS_TITLE"
1052 msgstr "Constructiond'un Tore"
1054 #: GeometryGUI_SuppressFacesDlg.cxx:103
1055 msgid "GEOM_SUPRESSFACE_TITLE"
1056 msgstr "Supprimer des Faces dans un Objet"
1058 #: GeometryGUI_SuppressFacesDlg.cxx:164
1059 msgid "GEOM_SUPRESSFACE_SELECT"
1060 msgstr "Selectionner les Faces a Supprimer"
1062 #: GeometryGUI_TranslationDlg.cxx:78
1063 msgid "GEOM_TRANSLATION_COOR"
1064 msgstr "Translation Avec Coordonnees"
1066 msgid "GEOM_TRANSPARENCY_TITLE"
1067 msgstr "Transparence"
1069 msgid "GEOM_TRANSPARENCY_OPAQUE"
1072 msgid "GEOM_TRANSPARENCY_TRANSPARENT"
1073 msgstr "Transparent"
1075 msgid "GEOM_SUPPRESSHOLE_TITLE"
1076 msgstr "Suppression de trous"
1078 msgid "GEOM_SUPPRESSHOLE_SELECTFACE"
1079 msgstr "Selection de la face initiale"
1081 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE"
1082 msgstr "Selection du contour/trou sur la face"
1084 msgid "GEOM_SUPPRESSHOLE_SELECTFACE_END"
1085 msgstr "Selection de la face terminale (si trou traversant)"
1087 msgid "GEOM_SUPPRESSHOLE_SELECTWIRE_END"
1088 msgstr "Selection de contour final (si trou traversant)"
1090 msgid "GEOM_SUPPRESSHOLE_FACE_SHELL"
1091 msgstr "Face ou shell"
1093 msgid "GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE"
1094 msgstr "Selection de trou(s) sur la face"
1096 #: GeometryGUI_TranslationDlg.cxx:56
1097 msgid "GEOM_TRANSLATION_TITLE"
1098 msgstr "Translation d'un Objet"
1100 #: GeometryGUI_VectorDlg.cxx:54
1101 msgid "GEOM_VECTOR_TITLE"
1102 msgstr "Construction d'un Vecteur"
1104 #: GeometryGUI_WhatisDlg.cxx:63
1105 msgid "GEOM_WHATIS_TITLE"
1108 #: GeometryGUI_WhatisDlg.cxx:86
1109 msgid "GEOM_WHATIS_OBJECT"
1110 msgstr "Objet et ses Informations Topologiques"
1112 #: GeometryGUI_WireDlg.cxx:46
1113 msgid "GEOM_WIRE_TITLE"
1114 msgstr "Creer un Wire"
1116 #: GeometryGUI_WireDlg.cxx:103
1117 msgid "GEOM_WIRE_CONNECT"
1118 msgstr "Creation d'un Wire a partir de wires/edges connectes"
1120 #: GeometryGUI_WorkingPlaneDlg.cxx:50
1121 msgid "GEOM_WPLANE_TITLE"
1122 msgstr "plan de travail"
1124 #: GeometryGUI_WorkingPlaneDlg.cxx:107
1125 msgid "GEOM_WPLANE_FACE"
1126 msgstr "Plan Ou Face plane"
1128 #: GeometryGUI_multiTranslationDlg.cxx:107
1129 msgid "GEOM_MULTITRANSLATION_TITLE"
1130 msgstr "Multi-Translation"
1132 #: GeometryGUI_multiTranslationDlg.cxx:107
1133 msgid "GEOM_MULTITRANSLATION_SIMPLE"
1134 msgstr "Multi Translation Simple"
1136 #: GeometryGUI_multiTranslationDlg.cxx:107
1137 msgid "GEOM_MULTITRANSLATION_DOUBLE"
1138 msgstr "Multi Translation Double"
1140 #: GeometryGUI_multiRotationDlg.cxx:107
1141 msgid "GEOM_MULTIROTATION_TITLE"
1142 msgstr "Multi-Rotation"
1144 #: GeometryGUI_multiRotationDlg.cxx:107
1145 msgid "GEOM_MULTIROTATION_SIMPLE"
1146 msgstr "Multi Rotation Simple"
1148 #: GeometryGUI_multiRotationDlg.cxx:107
1149 msgid "GEOM_MULTIROTATION_DOUBLE"
1150 msgstr "Multi Rotation Double"
1152 msgid "GEOM_PARAM_POINT"
1153 msgstr "Point paramétrique"
1156 #==============================================================================
1159 #: GeometryGUI.cxx:4613
1160 msgid "GEOM_MEN_WIREFRAME"
1163 #: GeometryGUI.cxx:4613
1164 msgid "GEOM_MEN_SHADING"
1167 msgid "GEOM_RECONSTRUCTION_LIMIT"
1168 msgstr "Limite de Reconstruction"
1170 msgid "GEOM_SUPPRESS_RESULT"
1171 msgstr "Supprimer le Resultat"
1173 msgid "GEOM_SUPPRESS_RESULT_INSIDE"
1176 msgid "GEOM_SUPPRESS_RESULT_OUTSIDE"
1179 msgid "GEOM_RECONSTRUCTION_LIMIT_SHAPE"
1181 msgid "GEOM_RECONSTRUCTION_LIMIT_SOLID"
1183 msgid "GEOM_RECONSTRUCTION_LIMIT_SHELL"
1185 msgid "GEOM_RECONSTRUCTION_LIMIT_FACE"
1187 msgid "GEOM_RECONSTRUCTION_LIMIT_WIRE"
1189 msgid "GEOM_RECONSTRUCTION_LIMIT_EDGE"
1191 msgid "GEOM_RECONSTRUCTION_LIMIT_VERTEX"
1194 msgid "GEOM_SPLINE_TITLE"
1195 msgstr "Construction de Splines"
1200 msgid "GEOM_INTERPOL"
1201 msgstr "Interpolation"
1204 #==============================================================================
1207 msgid "GEOM_SKETCHER_EL"
1208 msgstr "Type d'Element"
1210 msgid "GEOM_BUT_CLOSE_SKETCH"
1211 msgstr "Fermer Sketch"
1213 msgid "GEOM_BUT_END_SKETCH"
1214 msgstr "Terminer Sketch"
1216 msgid "GEOM_SKETCHER_TITLE"
1217 msgstr "Construction de Sketch"
1219 msgid "GEOM_SKETCHER_POINT"
1222 msgid "GEOM_SKETCHER_SEGMENT"
1225 msgid "GEOM_SKETCHER_ARC"
1228 msgid "GEOM_SKETCHER_DIR"
1231 msgid "GEOM_SKETCHER_POINT2"
1234 msgid "GEOM_SKETCHER_DEST"
1235 msgstr "Destination"
1237 msgid "GEOM_SKETCHER_ABS"
1240 msgid "GEOM_SKETCHER_REL"
1243 msgid "GEOM_SKETCHER_SEL"
1246 msgid "GEOM_SKETCHER_ANGLE"
1249 msgid "GEOM_SKETCHER_PER"
1250 msgstr "Perpendiculaire"
1252 msgid "GEOM_SKETCHER_TAN"
1255 msgid "GEOM_SKETCHER_VXVY"
1258 msgid "GEOM_SKETCHER_LENGTH"
1261 msgid "GEOM_SKETCHER_X"
1264 msgid "GEOM_SKETCHER_Y"
1267 msgid "GEOM_SKETCHER_X2"
1270 msgid "GEOM_SKETCHER_Y2"
1273 msgid "GEOM_SKETCHER_X3"
1276 msgid "GEOM_SKETCHER_Y3"
1279 msgid "GEOM_SKETCHER_DX2"
1282 msgid "GEOM_SKETCHER_DY2"
1285 msgid "GEOM_SKETCHER_VX2"
1288 msgid "GEOM_SKETCHER_VY2"
1291 msgid "GEOM_SKETCHER_LENGTH2"
1294 msgid "GEOM_SKETCHER_ANGLE2"
1297 msgid "GEOM_SKETCHER_RADIUS2"
1300 msgid "GEOM_SKETCHER_UNDO"
1303 msgid "GEOM_SKETCHER_APPLY"
1306 msgid "GEOM_SKETCHER_VALUES"
1309 msgid "GEOM_SKETCHER_TYPE"
1312 msgid "GEOM_FILLET_ABORT"
1313 msgstr "Le congé ne peut-être realisé avec un rayon de %1 "
1315 msgid "GEOM_CHAMFER_ABORT"
1316 msgstr "Le chanfrein ne peut-être realisé avec %1 et %2 "